# DAC70508ZRTER

**Texas Instruments** · Digital To Analog Converters (DAC) · WQFN-16-EP(3x3)

DAC70508ZRTER from Texas Instruments, in a WQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REF | bidirectional | Reference pin that is the internal reference output by default, or the reference input when an external reference is used. |
| 2 | OUT0 | output | Analog voltage output of DAC channel 0. |
| 3 | OUT1 | output | Analog voltage output of DAC channel 1. |
| 4 | OUT2 | output | Analog voltage output of DAC channel 2. |
| 5 | OUT3 | output | Analog voltage output of DAC channel 3. |
| 6 | GND | power_in | Ground reference point for all circuitry on the device. |
| 7 | VDD | power_in | Analog supply voltage, specified at 2.7 V to 5.5 V. |
| 8 | OUT4 | output | Analog voltage output of DAC channel 4. |
| 9 | OUT5 | output | Analog voltage output of DAC channel 5. |
| 10 | OUT6 | output | Analog voltage output of DAC channel 6. |
| 11 | OUT7 | output | Analog voltage output of DAC channel 7. |
| 12 | CS | input | Active-low serial data enable and frame sync; the serial interface shift register is enabled when CS goes low. |
| 13 | SCLK | input | Serial interface clock input. |
| 14 | SDI | input | Serial data input, clocked into the input shift register on each falling edge of SCLK. |
| 15 | SDO/ALARM | output | Serial data output (default) that is high impedance when CS is high; it can instead be configured as an open-drain ALARM output for CRC or reference alarms, which requires a 10 kΩ pull-up to VIO. |
| 16 | VIO | power_in | IO supply voltage for the serial interface, specified at 1.7 V to 5.5 V. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WQFN-16-EP(3x3) |
| Category | Data Acquisition |
| Pins | 17 |

## CAD (KiCad official)

- Symbol: `DAC70508ZRTER`
- Footprint: `Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm`
- 3D model: WQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files: `dac70508zrter-etched.step` / `dac70508zrter-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `dac70508zrter.step` / `dac70508zrter.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/dac60508) (59 pp, sha256 `0cc679c7f01fd2b7`, retrieved 2026-10-08, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/dac70508zrter-datasheet.pdf)