component
DAC60501MDGSR
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DACs), VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDAC60501MDGSR
Texas Instruments · Digital To Analog Converters (DACs) · VSSOP-10-0.5mm
DAC60501MDGSR from Texas Instruments, in a VSSOP-10-0.5mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Analog supply voltage (2.7 V to 5.5 V) |
| 2 | VOUT | output | Analog output voltage from the DAC |
| 3 | NC | unconnected | No connection. Leave floating. |
| 4 | AGND | power_in | Ground reference point for all circuitry on the device. |
| 5 | SPI2C | input | Interface select pin. Digital interface in SPI mode if SPI2C = 0. Digital interface in I2C mode if SPI2C = 1. SPI2C pin must be kept static after device powers up. |
| 6 | SCLK/SCL | input | Serial interface clock. SPI or I2C mode. |
| 7 | SYNC/A0 | input | SPI mode: Active low serial data enable. This input is the frame synchronization signal for the serial data. When the signal goes low, the serial interface input shift register is enabled. I2C mode: Four-state address input 0. |
| 8 | SDIN/SDA | bidirectional | SPI mode: Serial interface data input. Data are clocked into the input shift register on each falling edge of the SCLK pin. I2C mode: Data are clocked into or out of the input register. This pin is a bidirectional, SDA drain data line that must be connected to the supply voltage with an external pullup resistor. |
| 9 | NC | unconnected | No connection. Leave floating. |
| 10 | VREFIO | bidirectional | When using the internal reference, this pin is the reference output voltage pin (default). Reference input to the device when operating with external reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-10-0.5mm |
| Category | ADC/DAC/Data Conversion |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
DAC60501MDGSR - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: VSSOP-10-0.5mm (KiCad packages3D, STEP)
- 3D model files:
dac60501mdgsr-etched.step/dac60501mdgsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac60501mdgsr.step/dac60501mdgsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (53 pp, sha256
f3e447e0d3923a2b, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).