component
DAC101S101CIMM
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), VSSOP-8-0.65mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDAC101S101CIMM
Texas Instruments · Digital To Analog Converters (DAC) · VSSOP-8-0.65mm
DAC101S101CIMM from Texas Instruments, in a VSSOP-8-0.65mm. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VA | power_in | Power supply and reference input; should be decoupled to GND. |
| 2 | NC | unconnected | No internal connection to this pin. |
| 3 | NC | unconnected | No internal connection to this pin. |
| 4 | VOUT | output | DAC analog output voltage. |
| 5 | SYNC | input | Frame synchronization input for the data input; when low, enables input shift register; DAC is updated on 16th clock cycle unless SYNC goes high before then. |
| 6 | SCLK | input | Serial clock input; data is clocked into the input shift register on the falling edges of this pin. |
| 7 | DIN | input | Serial data input; data is clocked into the 16-bit shift register on the falling edges of SCLK after the fall of SYNC. |
| 8 | GND | power_in | Ground reference for all on-chip circuitry. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8-0.65mm |
| Category | Data Acquisition |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
DAC101S101CIMM - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8-0.65mm (KiCad packages3D, STEP)
- 3D model files:
dac101s101cimm-etched.step/dac101s101cimm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac101s101cimm.step/dac101s101cimm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (39 pp, sha256
df8e3253980b15b5, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).