component
DA14697-00000HR2
Public Made by Adomby adom
RENESAS Microcontroller Units (MCUs/MPUs/SOCs), VFBGA-100. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747
{
"slug": "da14697-00000hr2",
"version": "0.1.0",
"type": "component",
"description": "RENESAS Microcontroller Units (MCUs/MPUs/SOCs), VFBGA-100. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"single chip microcomputer-microcontroller",
"da14697-00000hr2",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"da14697-00000hr2.kicad_sym",
"da14697-00000hr2.kicad_mod",
"da14697-00000hr2.glb",
"da14697-00000hr2.step",
"da14697-00000hr2.lbr",
"docs/hero.png",
"docs/da14697-00000hr2-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"da14697-00000hr2-hero.glb",
"da14697-00000hr2-hero.overlay.json",
"da14697-00000hr2-etched.glb"
],
"component": {
"mpn": "DA14697-00000HR2",
"manufacturer": "RENESAS",
"package": "VFBGA-100",
"pin_count": 100,
"category": "Single Chip Microcomputer/Microcontroller",
"subcategory": "Microcontroller Units (MCUs/MPUs/SOCs)",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/c84a38b5e1af78a6171cb17e4cf39018.pdf",
"parts": {
"symbol": "da14697-00000hr2.kicad_sym",
"footprint": "da14697-00000hr2.kicad_mod",
"model_3d": "da14697-00000hr2-hero.glb",
"model_3d_plain": "da14697-00000hr2-etched.glb",
"model_3d_step": "da14697-00000hr2-etched.step",
"model_3d_step_plain": "da14697-00000hr2.step",
"lbr": "da14697-00000hr2.lbr"
},
"distributor_links": {
"lcsc": "C5334512",
"digikey": "DA14697-00000HR2TR-ND",
"mouser": "724-DA14697-00000HR2"
},
"distributor_check": {
"checked_at": "2026-10-30T17:37:56Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "DA14697-00000HR2TR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "724-DA14697-00000HR2",
"status": "found"
}
},
"pins": [
{
"number": "A1",
"name": "QSPIF_CLK",
"type": "output",
"description": "OUTPUT. QSPI Flash clock."
},
{
"number": "A2",
"name": "QSPIF_D0",
"type": "bidirectional",
"description": "INPUT/OUTPUT. QSPI Flash I/O data 0."
},
{
"number": "A3",
"name": "P0_10",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PU at reset) with alternate function M33_SWDIO, the Arm Cortex-M33 JTAG/SWD data I/O signal."
},
{
"number": "A4",
"name": "P0_12",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PU at reset) with alternate functions CMAC_SWDIO (Arm Cortex-M0+ JTAG data I/O) and XTAL32M (32 MHz XTAL oscillator clock output)."
},
{
"number": "A5",
"name": "VSUP_RF",
"type": "power_in",
"description": "Radio supply voltage input; connect to V14 externally and provide a 10 µF decoupling capacitor."
},
{
"number": "A6",
"name": "PSUB",
"type": "power_in",
"description": "RF ground."
},
{
"number": "A7",
"name": "RFIOM",
"type": "power_in",
"description": "RF ground for the RFIOP radio port."
},
{
"number": "A8",
"name": "RFIOP",
"type": "passive",
"description": "RF input/output with 50 Ω impedance."
},
{
"number": "A9",
"name": "RFIOM2",
"type": "power_in",
"description": "RF ground."
},
{
"number": "A10",
"name": "PSUB_RF",
"type": "power_in",
"description": "RF ground."
},
{
"number": "B1",
"name": "QSPIF_CS",
"type": "output",
"description": "OUTPUT. QSPI Flash chip select (active LOW); the output is HIGH in default and reset states and no pull-up resistor is required."
},
{
"number": "B2",
"name": "QSPIF_D3",
"type": "bidirectional",
"description": "INPUT/OUTPUT. QSPI Flash I/O data 3."
},
{
"number": "B3",
"name": "P0_11",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function M33_SWCLK, the Arm Cortex-M33 JTAG clock input."
},
{
"number": "B4",
"name": "P0_13",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions CMAC_SWCLK (Arm Cortex-M0+ JTAG clock input) and RC32M (RC32M clock output, square wave)."
},
{
"number": "B5",
"name": "P0_09",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions GPADC_3 and SDADC_3 analog inputs, PG4_4, and UART Boot TX output."
},
{
"number": "B6",
"name": "P0_08",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions GPADC_2 and SDADC_2 analog inputs, PG4_3, and UART Boot RX input."
},
{
"number": "B7",
"name": "ESDN",
"type": "power_in",
"description": "RF ground."
},
{
"number": "B8",
"name": "RSTn",
"type": "input",
"description": "Reset input, active LOW."
},
{
"number": "B9",
"name": "P0_07",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate function NTC Input, the analog feedback input for the battery NTC."
},
{
"number": "B10",
"name": "P0_06",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate function SDADC_GND, the analog input for the ΣΔ ADC reference ground."
},
{
"number": "C1",
"name": "QSPIF_D2",
"type": "bidirectional",
"description": "INPUT/OUTPUT. QSPI Flash I/O data 2."
},
{
"number": "C2",
"name": "QSPIF_D1",
"type": "bidirectional",
"description": "INPUT/OUTPUT. QSPI Flash I/O data 1."
},
{
"number": "C3",
"name": "P0_24",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions PG1_4 (Pattern Generator 1, output 4) and LCD_TE (LCD tearing effect input)."
},
{
"number": "C4",
"name": "P0_21",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function PG1_3 (Pattern Generator 1, output 3)."
},
{
"number": "C5",
"name": "P0_20",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function PG2_4 (Pattern Generator 2, output 4)."
},
{
"number": "C6",
"name": "P0_19",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function PG2_3 (Pattern Generator 2, output 3)."
},
{
"number": "C7",
"name": "P0_18",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate function PG2_2 (Pattern Generator 2, output 2)."
},
{
"number": "C8",
"name": "P0_17",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate functions PG2_1 (Pattern Generator 2, output 1) and RC32k (32 kHz RC clock output, square wave)."
},
{
"number": "C9",
"name": "P0_16",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate functions SDADC_REF (ΣΔ ADC reference voltage input) and RCX (RCX clock output, square wave)."
},
{
"number": "C10",
"name": "GND_RF2",
"type": "power_in",
"description": "RF ground."
},
{
"number": "D1",
"name": "P0_05",
"type": "bidirectional",
"description": "General-purpose I/O (4/8/12/16 mA, I-PD at reset) with alternate function QSPIR_CLK (QSPI RAM clock output) and PG3_3; usable as GPIO only at 1.8 V because it is a QSPI pad."
},
{
"number": "D2",
"name": "P0_00",
"type": "bidirectional",
"description": "General-purpose I/O (4/8/12/16 mA, I-PD at reset) with alternate functions QSPIR_D0 (QSPI RAM data I/O 0) and PG3_4; usable as GPIO only at 1.8 V because it is a QSPI pad."
},
{
"number": "D3",
"name": "P0_31",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions PG1_2 (Pattern Generator 1, output 2) and LCD_XRST (LCD reset for horizontal and vertical driver)."
},
{
"number": "D4",
"name": "P0_30",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions PG1_1 (Pattern Generator 1, output 1), LCD_HST and PLCD_HSYNC."
},
{
"number": "D5",
"name": "P0_29",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions PG0_4 (Pattern Generator 0, output 4), LCD_HCK and PLCD_CLK."
},
{
"number": "D6",
"name": "P0_28",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions PG0_3 (Pattern Generator 0, output 3), LCD_VST and PLCD_VSYNC."
},
{
"number": "D7",
"name": "P0_27",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate functions PG0_2 (Pattern Generator 0, output 2), LCD_ENB and PLCD_ENAB."
},
{
"number": "D8",
"name": "P0_26",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate functions PG0_1 (Pattern Generator 0, output 1) and LCD_VCK (LCD shift clock for vertical driver)."
},
{
"number": "D9",
"name": "P0_25",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate functions GPADC_1 and SDADC_1 analog inputs."
},
{
"number": "D10",
"name": "GND_RF1",
"type": "power_in",
"description": "RF ground."
},
{
"number": "E1",
"name": "P0_04",
"type": "bidirectional",
"description": "General-purpose I/O (4/8/12/16 mA, I-PU at reset) with alternate functions QSPIR_CS (QSPI RAM chip select, active LOW) and PG3_1; usable as GPIO only at 1.8 V because it is a QSPI pad."
},
{
"number": "E2",
"name": "P0_03",
"type": "bidirectional",
"description": "General-purpose I/O (4/8/12/16 mA, I-PD at reset) with alternate functions QSPIR_D3 (QSPI RAM data I/O 3) and PG3_2; usable as GPIO only at 1.8 V because it is a QSPI pad."
},
{
"number": "E3",
"name": "VSSIOQ",
"type": "power_in",
"description": "QSPI ground."
},
{
"number": "E4",
"name": "P1_05",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function LCD_GREEN1 (LCD green image data output, bit 1)."
},
{
"number": "E5",
"name": "P1_04",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function LCD_GREEN0 (LCD green image data output, bit 0)."
},
{
"number": "E6",
"name": "P1_03",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function LCD_BLUE1 (LCD blue image data output, bit 1)."
},
{
"number": "E7",
"name": "P1_02",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate function LCD_BLUE0 (LCD blue image data output, bit 0)."
},
{
"number": "E8",
"name": "P1_01",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate function Timer.PWM, a timer/PWM output available in Sleep mode."
},
{
"number": "E9",
"name": "P1_00",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate function NTC Supply, the power supply output for the battery NTC sensor."
},
{
"number": "E10",
"name": "XTAL32M_GND",
"type": "power_in",
"description": "Analog ground input of the 32 MHz XTAL oscillator."
},
{
"number": "F1",
"name": "P0_02",
"type": "bidirectional",
"description": "General-purpose I/O (4/8/12/16 mA, I-PD at reset) with alternate functions QSPIR_D2 (QSPI RAM data I/O 2) and PG4_1; usable as GPIO only at 1.8 V because it is a QSPI pad."
},
{
"number": "F2",
"name": "P0_01",
"type": "bidirectional",
"description": "General-purpose I/O (4/8/12/16 mA, I-PD at reset) with alternate functions QSPIR_D1 (QSPI RAM data I/O 1) and PG4_2; usable as GPIO only at 1.8 V because it is a QSPI pad."
},
{
"number": "F3",
"name": "VSSD4",
"type": "power_in",
"description": "Digital ground."
},
{
"number": "F4",
"name": "VSSD3",
"type": "power_in",
"description": "Digital ground."
},
{
"number": "F5",
"name": "AVS1",
"type": "power_in",
"description": "Analog ground."
},
{
"number": "F6",
"name": "P1_08",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function LCD_RED1 (LCD red image data output, bit 1)."
},
{
"number": "F7",
"name": "P1_07",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function LCD_RED0 (LCD red image data output, bit 0)."
},
{
"number": "F8",
"name": "P1_06",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate function Timer2.PWM, the Timer2/PWM2 output available in Sleep mode."
},
{
"number": "F9",
"name": "XTAL32Mp",
"type": "passive",
"description": "Crystal input for the 32 MHz XTAL oscillator."
},
{
"number": "F10",
"name": "XTAL32Mm",
"type": "passive",
"description": "Crystal output for the 32 MHz XTAL oscillator."
},
{
"number": "G1",
"name": "V18F",
"type": "power_out",
"description": "1.8 V power rail with maximum current 50 mA; requires a 0.1 µF decoupling capacitor and must be connected to V18P externally."
},
{
"number": "G2",
"name": "V18P",
"type": "power_out",
"description": "1.8 V power rail with maximum current 50 mA; requires a 22 µF decoupling capacitor."
},
{
"number": "G3",
"name": "VSSD1",
"type": "power_in",
"description": "Digital ground."
},
{
"number": "G4",
"name": "VSSD2",
"type": "power_in",
"description": "Digital ground."
},
{
"number": "G5",
"name": "AVS2",
"type": "power_in",
"description": "Analog ground."
},
{
"number": "G6",
"name": "P1_11",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function LCD_XFRP (LCD liquid crystal driving signal, 62.5 Hz inverted)."
},
{
"number": "G7",
"name": "P1_10",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions LCD_VCOM/LCD_FRP combined output (62.5 Hz) and LCD_EXTCOMIN (1 Hz COM inversion signal input)."
},
{
"number": "G8",
"name": "P1_09",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA / 0.15 mA reduced drive, I-PD at reset) with alternate functions GPADC_0 and SDADC_0 analog inputs."
},
{
"number": "G9",
"name": "XTAL32M_GND",
"type": "power_in",
"description": "Analog ground input of the 32 MHz XTAL oscillator."
},
{
"number": "G10",
"name": "XTAL32M_GND",
"type": "power_in",
"description": "Analog ground input of the 32 MHz XTAL oscillator."
},
{
"number": "H1",
"name": "V14",
"type": "power_out",
"description": "1.4 V power rail output; requires a 10 µF decoupling capacitor."
},
{
"number": "H2",
"name": "V18",
"type": "power_out",
"description": "1.8 V power rail with maximum current 50 mA; requires a 22 µF decoupling capacitor."
},
{
"number": "H3",
"name": "P1_17",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions LCD_HST and PLCD_HSYNC (LCD start signal for horizontal driver / column pointer reset)."
},
{
"number": "H4",
"name": "P1_16",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions LCD_HCK and PLCD_CLK (LCD horizontal shift clock / parallel LCD clock)."
},
{
"number": "H5",
"name": "P1_15",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions LCD_VST and PLCD_VSYNC (LCD vertical start / row pointer reset)."
},
{
"number": "H6",
"name": "P1_14",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions SDADC_4 analog input, LCD_ENB and PLCD_ENAB."
},
{
"number": "H7",
"name": "P1_13",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions GPADC_4 analog input and LCD_VCK (LCD vertical shift clock)."
},
{
"number": "H8",
"name": "P1_12",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function GPADC_5, the general-purpose ADC channel 5 analog input."
},
{
"number": "H9",
"name": "P0_22",
"type": "passive",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function XTAL32km, the analog output of the 32.768 kHz XTAL oscillator."
},
{
"number": "H10",
"name": "P0_23",
"type": "passive",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions XTAL32kp (analog input of the 32.768 kHz crystal oscillator) and a digital input for an external 32 kHz clock (square wave)."
},
{
"number": "J1",
"name": "LY",
"type": "passive",
"description": "Connection for the external DC-DC converter inductor."
},
{
"number": "J2",
"name": "V12",
"type": "power_out",
"description": "1.2 V power rail output; requires a 10 µF decoupling capacitor."
},
{
"number": "J3",
"name": "HDRV GND",
"type": "power_in",
"description": "Haptic driver ground."
},
{
"number": "J4",
"name": "HDRVP",
"type": "output",
"description": "Positive haptic driver differential output."
},
{
"number": "J5",
"name": "VBUS",
"type": "power_in",
"description": "USB bus voltage input (VBUS) that is also the battery charge voltage input; absolute maximum 6.5 V and recommended range 4.2 V to 5.75 V."
},
{
"number": "J6",
"name": "V30",
"type": "power_out",
"description": "3.0 V power rail with maximum current 150 mA; requires a 4.7 µF decoupling capacitor."
},
{
"number": "J7",
"name": "P1_21",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions SDADC_6 analog input and LCD_XRST (LCD reset for horizontal and vertical driver)."
},
{
"number": "J8",
"name": "P1_20",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function SDADC_5, the ΣΔ ADC channel 5 analog input."
},
{
"number": "J9",
"name": "P1_19",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function GPADC_7, the general-purpose ADC channel 7 analog input."
},
{
"number": "J10",
"name": "P1_18",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate function GPADC_6, the general-purpose ADC channel 6 analog input."
},
{
"number": "K1",
"name": "LX",
"type": "passive",
"description": "Connection for the external DC-DC converter inductor."
},
{
"number": "K2",
"name": "VBAT2",
"type": "power_in",
"description": "Battery connection 2 for the DC-DC converter supply; recommended supply range 2.4 V to 4.75 V."
},
{
"number": "K3",
"name": "BUCK GND",
"type": "power_in",
"description": "DC-DC converter ground."
},
{
"number": "K4",
"name": "HDRVM",
"type": "output",
"description": "Negative haptic driver differential output."
},
{
"number": "K5",
"name": "VBAT1",
"type": "power_in",
"description": "Battery connection 1 for the LDO supply; recommended supply range 2.4 V to 4.75 V."
},
{
"number": "K6",
"name": "P0_14",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset, no state retention in power down) with alternate functions USBp (USB Full Speed D+) and XTAL32k (XTAL32k clock output, square wave)."
},
{
"number": "K7",
"name": "P0_15",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset, no state retention in power down) with alternate functions USBm (USB Full Speed D-) and DIVN (DIVN clock output, square wave)."
},
{
"number": "K8",
"name": "P1_22",
"type": "bidirectional",
"description": "General-purpose I/O (4.8 mA, I-PD at reset) with alternate functions SDADC_7 analog input and LCD_TE (LCD tearing effect input)."
},
{
"number": "K9",
"name": "LED2",
"type": "output",
"description": "LED 2 driver output, open drain, 20 mA maximum."
},
{
"number": "K10",
"name": "LED1",
"type": "output",
"description": "LED 1 driver output, open drain, 20 mA maximum."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: XTAL32M_GND is listed on three balls in the VFBGA100 table; each ball is given its own entry.; The P0_12 row in the VFBGA100 GPIO table (page 51) names the pin XTAL32M, but its function text read; The P1_17 row (page 56) names LCD_HST/PLCD_HSYNC, but its function text reads 'OUTPUT. XTAL32M clock"
],
"pages_sent": 63,
"cost_usd": 0.4025,
"at": "2026-10-30T17:37:48"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/c84a38b5e1af78a6171cb17e4cf39018.pdf",
"pages": 757,
"sha256": "078a98fd8552338d",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 100,
"described": 100,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "da14697-00000hr2.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.0,
7.0,
0.758
],
"zmin_mm": -0.008,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "32ba0a1d16bda5960dbe751b4c90dbdcbbeeca847dff04ed8252fe0f6366213d",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "da14697-00000hr2-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.0,
7.0,
0.758
],
"zmin_mm": -0.008,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "29f397a67e194e4b7ff4c6c96324ecc86cb0b16b91c973438497136deecf5f08",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}