component
D6208
Public Made by Adomby adom
Silicore(芯谷) , SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownD6208
Silicore(芯谷) · IC · SOP-8
D6208 from Silicore(芯谷), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Vcc | power_in | Supply pin; recommended supply voltage is 4.5 V minimum to 15 V maximum, with an absolute maximum rating of 18 V. |
| 2 | Bout | output | B-channel motor driver output, with a maximum output current of 500 mA as an absolute maximum rating and 200 mA listed in the electrical characteristics. |
| 3 | GND | power_in | Ground pin (one of two GND pins on the SOP8 package, shared with pin 7). |
| 4 | Aout | output | A-channel motor driver output, with a maximum output current of 500 mA as an absolute maximum rating and 200 mA listed in the electrical characteristics. |
| 5 | Bin | input | B-channel TTL logic input; a high level requires 2.0 V or more and a low level requires 0.8 V or less, and driving both A and B high brakes the motor. |
| 6 | NC | unconnected | Empty pin with no function stated in the datasheet (no connection). |
| 7 | GND | power_in | Ground pin (one of two GND pins on the SOP8 package, shared with pin 3). |
| 8 | Ain | input | A-channel TTL logic input; a high level requires 2.0 V or more and a low level requires 0.8 V or less, and driving both A and B high brakes the motor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silicore(芯谷) |
| Package | SOP-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 Supply voltage (recommended) | Vcc | 4.5 | 15 | V | 3 | ||
| 电源电压 Supply voltage (absolute maximum) | Vcc | 18 | V | 3 | |||
| 最大输出电流 Maximum output current | Iout | 500 | mA | 3 | |||
| 功耗 Power dissipation (SOP8) | PD | 450 | mW | SOP8 package; above 25°C derate 4.5 mW per °C | 3 | ||
| 工作环境温度 Operating ambient temperature | Tamb | -25 | 85 | ℃ | 3 | ||
| 贮存温度 Storage temperature | Tstg | -55 | 150 | ℃ | 3 | ||
| 输出电流 Output current | Io | 200 | mA | 4 | |||
| 输出饱和压降 Output saturation voltage | VCES | 1 | 1.6 | V | Io=100mA | 4 | |
| 输入高电平电压 High-level input voltage | VIH | 2 | V | 4 | |||
| 输入低电平电压 Low-level input voltage | VIL | 0.8 | V | 4 | |||
| 待机电流 Standby current | IST | 0.4 | mA | Inputs A and B both low | 4 | ||
| 输入高电平电流 High-level input current | IIH | 250 | 400 | A | VIH=4.5V | 4 | |
| 抗冲击保护二极管吸收电流 Protection diode surge absorption current | 500 | mA | Pulse width 10ms, duty cycle 10% or less | 4 |
CAD (KiCad official)
- Symbol:
D6208 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
d6208-etched.step/d6208-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);d6208.step/d6208.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Silicore(芯谷) datasheet (8 pp, sha256
cdd21a83e80a2d14, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).