component
D324
Public Made by Adomby adom
Silicore(芯谷) , DIP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownD324
Silicore(芯谷) · IC · DIP-14
D324 from Silicore(芯谷), in a DIP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier 1, which swings from 0V to Vcc-1.5V per the datasheet's large output voltage swing specification. |
| 2 | IN1(-) | input | Inverting input of amplifier 1; the differential input voltage range equals the power supply voltage. |
| 3 | IN1(+) | input | Non-inverting input of amplifier 1; the common-mode input range includes ground, up to Vcc-1.5V at Vcc=30V. |
| 4 | Vcc | power_in | Positive power supply; the datasheet gives Vcc=3V to 32V (or 1.5V to 16V), with absolute maximum Vcc of 16 or 32 V. |
| 5 | IN2(+) | input | Non-inverting input of amplifier 2; the common-mode input range includes ground, up to Vcc-1.5V at Vcc=30V. |
| 6 | IN2(-) | input | Inverting input of amplifier 2; the differential input voltage range equals the power supply voltage. |
| 7 | OUT2 | output | Output of amplifier 2, which swings from 0V to Vcc-1.5V per the datasheet. |
| 8 | OUT3 | output | Output of amplifier 3, which swings from 0V to Vcc-1.5V per the datasheet. |
| 9 | IN3(-) | input | Inverting input of amplifier 3; the differential input voltage range equals the power supply voltage. |
| 10 | IN3(+) | input | Non-inverting input of amplifier 3; the common-mode input range includes ground, up to Vcc-1.5V at Vcc=30V. |
| 11 | GND | power_in | Ground (negative supply) reference pin for the device. |
| 12 | IN4(+) | input | Non-inverting input of amplifier 4; the common-mode input range includes ground, up to Vcc-1.5V at Vcc=30V. |
| 13 | IN4(-) | input | Inverting input of amplifier 4; the differential input voltage range equals the power supply voltage. |
| 14 | OUT4 | output | Output of amplifier 4, which swings from 0V to Vcc-1.5V per the datasheet. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silicore(芯谷) |
| Package | DIP-14 |
| Category | |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | Vcc | 32 | V | Printed as '16 or 32' V; 32 V is the Vcc=3V |
3 | ||
| Differential Input Voltage | VID | 32 | V | 3 | |||
| Input Voltage | VIN | -0.3 | 32 | V | 3 | ||
| Power Dissipation (DIP14) | PD | 1130 | mW | DIP14 package | 3 | ||
| Operating Temperature Range | Topr | 0 | 70 | C | 3 | ||
| Storage Temperature Range | Tstg | -65 | 150 | C | 3 | ||
| Input offset voltage | VIO | 1 | 3 | mV | Ta=25C | 3 | |
| Input offset voltage | VIO | 5 | mV | Ta=0C | 3 | ||
| Input bias current | IIN | 20 | 250 | nA | IIN(+) or IIN-, VCM=0V, Ta=25C | 3 | |
| Input bias current | IIN | 500 | nA | IIN(+) or IIN-, VCM=0V, Ta=0~70C | 3 | ||
| Input offset current | IIO | 5 | 50 | nA | IIN(+) or IIN-, VCM=0V, Ta=25C | 3 | |
| Input offset current | IIO | 150 | nA | IIN(+) or IIN-, VCM=0V, Ta=0~70C | 3 | ||
| Input common-mode voltage range | VICM | 0 | V | Vcc=30V, Ta=25C; max printed as Vcc-1.5 | 3 | ||
| Supply current | ICC | 1.5 | 3 | mA | Over full temperature range, RL=inf on all OP amps, Vcc=30V | 3 | |
| Supply current | ICC | 0.7 | 1.2 | mA | Over full temperature range, RL=inf on all OP amps, Vcc=5V | 3 | |
| Large signal voltage gain | AVD | 25 | 100 | V/mV | Vcc=15V, RL>=2kOhm, Ta=25C | 3 | |
| Large signal voltage gain | AVD | 15 | V/mV | Vcc=15V, RL>=2kOhm, Ta=0~70C | 3 | ||
| Common-mode rejection ratio | CMRR | 65 | 85 | dB | DC, VCM=0V to Vcc-1.5V | 3 | |
| Power supply rejection ratio | PSRR | 65 | 100 | dB | Vcc=5V to 30V | 3 | |
| Output current, source | IO+ | 20 | 40 | mA | VIN+=1V, VIN-=0V, Vcc=15V, Vo=2V | 3 | |
| Output current, sink | IO- | 8 | 20 | mA | VIN+=0V, VIN-=1V, Vcc=15V, Vo=2V | 3 | |
| Output current, sink | IO- | 12 | 50 | uA | VIN+=0V, VIN-=1V, Vcc=15V, Vo=200mV | 3 | |
| Output short circuit current to ground | ISC | 40 | 60 | mA | Vcc=15V | 3 | |
| Output voltage swing, high | VOH | 26 | V | Vcc=30V, RL=2kOhm | 3 | ||
| Output voltage swing, high | VOH | 27 | 28 | V | Vcc=30V, RL=10kOhm | 3 | |
| Output voltage swing, low | VOL | 5 | 20 | mV | Vcc=5V, RL=10kOhm | 3 | |
| Power supply voltage (single supply) | Vcc | 3 | 32 | V | Features: alternate range Vcc=1.5V~16V | 1 |
CAD (KiCad official)
- Symbol:
D324 - Footprint:
Package_DIP:DIP-14_W7.62mm - 3D model: DIP-14 (KiCad packages3D, STEP)
- 3D model files:
d324-etched.step/d324-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);d324.step/d324.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Silicore(芯谷) datasheet (8 pp, sha256
2f32224cffa38052, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).