D2632-ADJ

{
  "slug": "d2632-adj",
  "version": "0.1.0",
  "type": "component",
  "description": "Silicore Linear Voltage Regulators (LDO), TO-263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "d2632-adj",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "d2632-adj.kicad_sym",
    "d2632-adj.kicad_mod",
    "d2632-adj.glb",
    "d2632-adj.step",
    "d2632-adj.lbr",
    "docs/hero.png",
    "docs/d2632-adj-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "d2632-adj-hero.glb",
    "d2632-adj-hero.overlay.json",
    "d2632-adj-etched.glb"
  ],
  "component": {
    "mpn": "D2632-ADJ",
    "manufacturer": "Silicore",
    "package": "TO-263-5",
    "pin_count": 6,
    "category": "Power Supply Chip",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943963244417024",
    "parts": {
      "symbol": "d2632-adj.kicad_sym",
      "footprint": "d2632-adj.kicad_mod",
      "model_3d": "d2632-adj-hero.glb",
      "model_3d_plain": "d2632-adj-etched.glb",
      "model_3d_step": "d2632-adj-etched.step",
      "model_3d_step_plain": "d2632-adj.step",
      "lbr": "d2632-adj.lbr"
    },
    "distributor_links": {
      "lcsc": "C2837288"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T10:06:47Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Enable pin for ON/OFF control with TTL/CMOS-compatible thresholds (high/ON at 2.4 V min, low/OFF at 0.8 V max), and it may be tied to VIN or to a level up to 30 V when ON/OFF control is not needed."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Power supply input with a maximum continuous supply voltage of 26 V; transients up to 50 V are allowed only for under 100 ms at no more than 1% duty cycle, and the absolute rating is -20 V to +50 V."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin; a 0.1 µF capacitor between VIN and GND is recommended when the input source has high AC impedance."
      },
      {
        "number": "4",
        "name": "VOUT",
        "type": "power_out",
        "description": "Regulated output that requires a minimum output capacitor of 10 µF at full load, with a minimum load current of 7 mA to avoid leakage-driven output rise, and it delivers up to 3 A (full load)."
      },
      {
        "number": "5",
        "name": "ADJ",
        "type": "input",
        "description": "Adjust pin of the adjustable version used with an external two-resistor divider to set VOUT from 1.25 V up to 26 V, with a reference of 1.240 V typ and an adjust-pin bias current of 40 to 120 nA."
      },
      {
        "number": "6",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives a single pin table for the TO263-5L package (pins 1 to 5: EN, VIN, GND, VOUT, AD; The Electrical Characteristics note says the adjustable versions are programmed to 5.0 V for testing; The VIN absolute maximum of +50 V is a transient limit (under 100 ms, 1% duty cycle); the continuous",
          "exposed pad 6 added from the footprint"
        ],
        "pages_sent": 11,
        "cost_usd": 0.031,
        "at": "2026-10-18T10:06:21"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588943963244417024",
        "pages": 11,
        "sha256": "434713b4bfd480c6",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "d2632-adj.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15.0,
          10.0,
          4.42
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "94c2a3dc1aaad85b6b5193f97d9a7c61b4e28bac25952a1e629557bcf747e246",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "d2632-adj-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15.0,
          10.0,
          4.42
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "c3a859514cd47c59b2390f4af715f57d209190eca577161058b0ffc5418415f5",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}