component
D2596HV-5.0
Public Made by Adomby adom
Silicore(芯谷) DC-DC Converters, TO263-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| d2596hv-5-0-etched.glb | 17d ago |
| d2596hv-5-0-etched.step | 17d ago |
| d2596hv-5-0-hero.glb | 17d ago |
| d2596hv-5-0-hero.overlay.json | 17d ago |
| d2596hv-5-0.glb | 17d ago |
| d2596hv-5-0.kicad_mod | 17d ago |
| d2596hv-5-0.kicad_sym | 17d ago |
| d2596hv-5-0.lbr | 17d ago |
| d2596hv-5-0.step | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
D2596HV-5.0
Silicore(芯谷) · DC-DC Converters · TO263-5
D2596HV-5.0 from Silicore(芯谷), in a TO263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive input supply for the switching regulator, which needs a suitable input bypass capacitor to minimize voltage transients; recommended supply voltage is 6 to 60 V with an absolute maximum of 63 V. |
| 2 | OUTPUT | output | Internal switch output that swings between (+VIN - VSAT) and approximately -0.5 V, so the PC board copper connected to it should be kept to a minimum to limit coupling to sensitive circuitry. |
| 3 | GND | power_in | Circuit ground for the regulator. |
| 4 | FEEDBACK | input | Senses the regulated output voltage to complete the feedback loop. |
| 5 | ON / OFF | input | Allows the switching regulator to be shut down with logic-level signals, with the pin voltage limited to -0.3 V up to +VIN. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Silicore(芯谷) |
| Package | TO263-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (VIN=12V, IO=500mA) | VOUT | 4.9 | 5 | 5.1 | V | VIN=12V, IO=500mA | 6 |
| Output Voltage (8V≤VIN≤60V, 0.5A≤ILOAD≤3A) | VOUT | 4.8 | 5 | 5.2 | V | 8V≤VIN≤60V, 0.5A≤ILOAD≤3A | 6 |
| Oscillator Frequency | fo | 127 | 150 | 173 | kHz | 5 | |
| VSAT Saturation Voltage | VSAT | 1.4 | 1.9 | V | IOUT=3A | 5 | |
| Max. Duty Cycle (ON) | DC | 93 | 98 | % | 5 | ||
| Current Limit | ICL | 3.6 | 4.5 | 6.9 | A | (Note 1) | 5 |
| Output Leakage Current (Output=0V) | IL | 2 | mA | Output=0V | 5 | ||
| Output Leakage Current (Output=-1V) | IL | 7.5 | 30 | mA | Output=-1V | 5 | |
| Quiescent Current | IQ | 5 | 10 | mA | 5 | ||
| Standby Quiescent Current | ISTBY | 50 | 200 | µA | ON / OFF pin=5V(OFF) | 5 | |
| ON / OFF Pin Logic Input Level High | VIH | 2 | V | VOUT=0V | 5 | ||
| ON / OFF Pin Logic Input Level Low | VIL | 0.8 | V | VOUT=nominal output voltage | 5 | ||
| ON / OFF Pin Input Current High | IIH | 12 | 30 | µA | ON / OFF pin=5V(OFF) | 5 | |
| ON / OFF Pin Input Current Low | IIL | 0 | 10 | µA | ON / OFF pin=0V(ON) | 5 | |
| Supply Voltage | VIN | 6 | 60 | V | 4 | ||
| Operating Temperature Range | Topr | -40 | 125 | ℃ | 4 | ||
| Maximum Supply Voltage | VIN | 63 | V | 4 | |||
| ON / OFF Pin Input Voltage | -0.3 | V | -0.3V≤V≤+VIN (upper limit printed as +VIN) | 4 | |||
| Output Voltage to Ground (steady state) | VOUT | -1 | V | steady state | 4 | ||
| Storage Temperature Range | Tstg | -65 | 150 | ℃ | 4 | ||
| Maximum Junction Temperature | TJA | 150 | ℃ | 4 | |||
| ESD Susceptibility (Human Body Model) | ESD | 2 | kV | Human Body Model | 4 | ||
| Lead Temperature (Soldering, 10 Seconds) | TL | 260 | ℃ | Soldering, 10 Seconds | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | Internal switch, the voltage at this pin switches between (+VIN VSAT) and approximately -0.5V. To minimize coupling to sensitive circuitry, the PC board copper area connected to this pin should be kep | 4 |
CAD (KiCad official)
- Symbol:
D2596HV-5.0 - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin3 - 3D model: TO263-5 (KiCad packages3D, STEP)
- 3D model files:
d2596hv-5-0-etched.step/d2596hv-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);d2596hv-5-0.step/d2596hv-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Silicore(芯谷) datasheet (21 pp, sha256
de18ec2f434138c0, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).