D2596-5.0

{
  "slug": "d2596-5-0",
  "version": "0.1.0",
  "type": "component",
  "description": "Silicore(芯谷) DC-DC Converters, TO-263-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "d2596-5.0",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "d2596-5-0.kicad_sym",
    "d2596-5-0.kicad_mod",
    "d2596-5-0.glb",
    "d2596-5-0.step",
    "d2596-5-0.lbr",
    "docs/hero.png",
    "docs/d2596-5-0-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "d2596-5-0-hero.glb",
    "d2596-5-0-hero.overlay.json",
    "d2596-5-0-etched.glb"
  ],
  "component": {
    "mpn": "D2596-5.0",
    "manufacturer": "Silicore(芯谷)",
    "package": "TO-263-5L",
    "pin_count": 6,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603157984671244288",
    "parts": {
      "symbol": "d2596-5-0.kicad_sym",
      "footprint": "d2596-5-0.kicad_mod",
      "model_3d": "d2596-5-0-hero.glb",
      "model_3d_plain": "d2596-5-0-etched.glb",
      "model_3d_step": "d2596-5-0-etched.step",
      "model_3d_step_plain": "d2596-5-0.step",
      "lbr": "d2596-5-0.lbr"
    },
    "distributor_links": {
      "lcsc": "C5368964"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T19:14:17Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Positive input supply for the switching regulator, which needs a suitable input bypass capacitor to minimize voltage transients and supply the switching currents; the recommended supply range is 6 V to 40 V."
      },
      {
        "number": "2",
        "name": "OUTPUT",
        "type": "output",
        "description": "Internal switch output that swings between (+VIN − VSAT) and approximately −0.5 V, so the PC board copper connected to it should be kept to a minimum to limit coupling to sensitive circuitry."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Circuit ground for the regulator."
      },
      {
        "number": "4",
        "name": "FEEDBACK",
        "type": "input",
        "description": "Senses the regulated output voltage to close the feedback loop, and for fixed-voltage versions it must be wired to the output voltage point."
      },
      {
        "number": "5",
        "name": "ON / OFF",
        "type": "input",
        "description": "Logic-level shutdown input where the pin is grounded or driven below about 1.6 V for normal operation and driven high to enter standby, and it must not be left open."
      },
      {
        "number": "6",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin configuration drawing for TO263-5L is a graphic and is not present in the extracted text. Pi; The datasheet lists TO263-5 as an available package for the D2596 family but does not explicitly map; In the OUTPUT pin description the minus sign in (+VIN − VSAT) was lost in text extraction; the print",
          "exposed pad 6 added from the footprint"
        ],
        "pages_sent": 20,
        "cost_usd": 0.0591,
        "at": "2026-10-17T19:12:04"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603157984671244288",
        "pages": 20,
        "sha256": "2aa3160772aa59ef",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 6,
        "described": 6,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "d2596-5-0.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15.0,
          10.0,
          4.42
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "94c2a3dc1aaad85b6b5193f97d9a7c61b4e28bac25952a1e629557bcf747e246",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "d2596-5-0-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          15.0,
          10.0,
          4.42
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "43a0ccc6bc28bcfe03f3bddfcb1fef56406a6eae343e3a31c4feba16728a6bf6",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}