CY9BF121JPMC-G-JNE2

@@ -0,0 +1,143 @@+# CY9BF121JPMC-G-JNE2++**Infineon Cypress Semicon** · Microcontrollers (MCU/MPU/SOC) · LQFP-32(7x7)++CY9BF121JPMC-G-JNE2 from Infineon Cypress Semicon, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | P3A | bidirectional | General-purpose I/O port 3A, multiplexed with multi-function timer 0 RTO00/PPG00 output, multi-function serial 2 SCK2 (I2C SCL2), free-run timer, external interrupt INT07_0 and sub-clock/RTC outputs; the relocated function is selected via EPFR. |+| 2 | P3B | bidirectional | General-purpose I/O port 3B, multiplexed with multi-function timer 0 RTO01/PPG00 output, input capture IC00_0, base timer TIOA1_1 and multi-function serial 2 SOT2 (I2C SDA2). |+| 3 | P3C | bidirectional | General-purpose I/O port 3C, multiplexed with multi-function timer 0 RTO02/PPG02 output, input capture IC01_0, external interrupt INT18_2, base timer TIOA2_1 and multi-function serial 2 SIN2. |+| 4 | P3D | bidirectional | General-purpose I/O port 3D, multiplexed with multi-function timer 0 RTO03/PPG02 output, input capture IC02_0, base timer TIOA3_1, multi-function serial 5 SCK5 (I2C SCL5) and QPRC AIN1_0. |+| 5 | P3E | bidirectional | General-purpose I/O port 3E, multiplexed with multi-function timer 0 RTO04/PPG04 output, external interrupt INT19_2, base timer TIOA4_1, multi-function serial 5 SOT5 (I2C SDA5) and QPRC BIN1_0. |+| 6 | P3F | bidirectional | General-purpose I/O port 3F, multiplexed with multi-function timer 0 RTO05/PPG04 output, base timer TIOA5_1, multi-function serial 5 SIN5 and QPRC ZIN1_0. |+| 7 | VCC | power_in | Analog/digital power supply pin; the recommended supply range is 2.7 V to 5.5 V. |+| 8 | C | passive | Power supply stabilization capacitor pin; a smoothing capacitor CS of 1 to 10 μF is connected for the internal regulator. |+| 9 | VSS | power_in | Analog/digital ground pin, 0 V reference for the device. |+| 10 | PE2/X0 | input | Main clock (oscillation) input pin X0, also usable as general-purpose I/O port E2; main crystal of 4 MHz to 48 MHz is supported. |+| 11 | PE3/X1 | bidirectional | Main clock (oscillation) I/O pin X1, also usable as general-purpose I/O port E3; it is the return side of the main oscillator. |+| 12 | INITX | input | External reset input pin; a reset is applied when INITX is low ("L"), with a minimum reset input time of 500 ns. |+| 13 | P46/X0A | bidirectional | Sub clock (oscillation) input pin X0A, also usable as general-purpose I/O port 46 and multiplexed with DTTI0X_0 and external interrupt INT07_1; sub clock is 32.768 kHz when using a crystal. |+| 14 | P47/X1A | bidirectional | Sub clock (oscillation) I/O pin X1A, also usable as general-purpose I/O port 47 and multiplexed with external interrupt INT14_2. |+| 15 | MD0 | input | Mode 0 pin; during normal operation MD0 must be held low ("L"), and during serial programming to Flash memory MD0 must be held high ("H"). |+| 16 | PE0/MD1 | input | Mode 1 pin; during serial programming to Flash memory MD1 must be held low ("L"); the pin is also usable as general-purpose I/O port E0. |+| 17 | P11 | bidirectional | General-purpose I/O port 1 (5 V tolerant), multiplexed with A/D analog input AN01, multi-function serial 1 SIN1, external interrupt INT02_1, free-run timer FRCK0_2 and QPRC AIN1_2. |+| 18 | P12 | bidirectional | General-purpose I/O port 1 (5 V tolerant), multiplexed with A/D analog input AN02, multi-function serial 1 SOT1 (I2C SDA1), base timer TIOA6_2, input capture IC00_2 and QPRC BIN1_2. |+| 19 | P13 | bidirectional | General-purpose I/O port 1 (5 V tolerant), multiplexed with A/D analog input AN03, multi-function serial 1 SCK1 (I2C SCL1), sub clock output SUBOUT_1, base timer TIOB6_2, input capture IC01_2, RTC output RTCCO_1 and QPRC ZIN1_2. |+| 20 | P14 | bidirectional | General-purpose I/O port 1 (5 V tolerant), multiplexed with A/D analog input AN04, multi-function serial 0 SIN0_1, external interrupt INT03_1, multi-function serial 0 SCK0 (I2C SCL0) and input capture IC02_2. |+| 21 | P15 | bidirectional | General-purpose I/O port 1 (5 V tolerant), multiplexed with A/D analog input AN05, multi-function serial 0 SOT0 (I2C SDA0), external interrupt INT14_0 and input capture IC03_2. |+| 22 | P23 | bidirectional | General-purpose I/O port 2 (5 V tolerant), multiplexed with A/D analog input AN12, multi-function serial 0 SCK0_0 (I2C SCL0), base timer TIOA7_1, DTTI0X_1 and QPRC AIN1_1. |+| 23 | P22 | bidirectional | General-purpose I/O port 2 (5 V tolerant), multiplexed with A/D analog input AN13, multi-function serial 0 SOT0_0 (I2C SDA0), base timer TIOB7_1 and QPRC ZIN1_1. |+| 24 | P21 | bidirectional | General-purpose I/O port 2 (5 V tolerant), multiplexed with A/D analog input AN14, multi-function serial 0 SIN0_0, external interrupt INT06_1 and QPRC BIN1_1. |+| 25 | VCC | power_in | Analog/digital power supply pin; the recommended supply range is 2.7 V to 5.5 V. |+| 26 | VSS | power_in | Analog/digital ground pin, 0 V reference for the device. |+| 27 | AVRL | power_in | A/D converter analog reference voltage low input; it must be at VSS (0 V). |+| 28 | AVRH | power_in | A/D converter analog reference voltage high input; the recommended range is 2.7 V to VCC. |+| 29 | P01/SWCLK | bidirectional | General-purpose I/O port 0, used as the serial wire debug interface clock input SWCLK. |+| 30 | P03/SWDIO | bidirectional | General-purpose I/O port 0, used as the serial wire debug interface data input/output SWDIO. |+| 31 | P04/SWO | bidirectional | General-purpose I/O port 0, used as the serial wire viewer output SWO. |+| 32 | P0F/NMIX | bidirectional | General-purpose I/O port 0, multiplexed with the non-maskable interrupt input NMIX, sub clock output SUBOUT_0, built-in high-speed CR clock output CROUT_1 and RTC output RTCCO_0. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Infineon Cypress Semicon |+| Package | LQFP-32(7x7) |+| Category | Embedded Processors & Controllers |+| Pins | 32 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Power supply voltage (absolute maximum) | VCC |  |  | 6.5 | V |  | 38 |+| Analog reference voltage (absolute maximum) | AVRH |  |  | 6.5 | V |  | 38 |+| Clamp maximum current | ICLAMP | -2 |  | 2 | mA | Note *7 | 38 |+| Clamp total maximum current | Σ[ICLAMP] |  |  | 20 | mA | Note *7 | 38 |+| L level maximum output current | IOL |  |  | 10 | mA | 4 mA type | 38 |+| L level maximum output current | IOL |  |  | 20 | mA | 12 mA type | 38 |+| L level average output current | IOLAV |  |  | 4 | mA | 4 mA type | 38 |+| L level average output current | IOLAV |  |  | 12 | mA | 12 mA type | 38 |+| L level total maximum output current | ΣIOL |  |  | 100 | mA |  | 38 |+| L level total average output current | ΣIOLAV |  |  | 50 | mA |  | 38 |+| H level maximum output current | IOH |  |  | -10 | mA | 4 mA type | 38 |+| H level maximum output current | IOH |  |  | -20 | mA | 12 mA type | 38 |+| H level average output current | IOHAV |  |  | -4 | mA | 4 mA type | 38 |+| H level average output current | IOHAV |  |  | -12 | mA | 12 mA type | 38 |+| H level total maximum output current | ΣIOH |  |  | -100 | mA |  | 38 |+| H level total average output current | ΣIOHAV |  |  | -50 | mA |  | 38 |+| Power consumption | PD |  |  | 350 | mW |  | 38 |+| Storage temperature | TSTG | -55 |  | 150 | °C |  | 38 |+| Power supply voltage (recommended) | VCC | 2.7 |  | 5.5 | V |  | 40 |+| Analog reference voltage (recommended) | AVRH | 2.7 |  |  | V |  | 40 |+| Smoothing capacitor for regulator | CS | 1 |  | 10 | μF | For regulator (note *1) | 40 |+| Operating temperature | TA | -40 |  | 105 | °C | When mounted on four-layer PCB | 40 |+| Operating temperature | TA | -40 |  | 85 | °C | When mounted on double-sided single-layer PCB | 40 |+| Input leak current | IIL | -5 |  | 5 | μA |  | 43 |+| Pull-up resistance value | RPU | 33 | 50 | 90 | kΩ | Pull-up pin, VCC ≥ 4.5 V | 43 |+| Pull-up resistance value | RPU |  |  | 180 | kΩ | VCC < 4.5 V | 43 |+| Input capacitance | CIN |  | 5 | 15 | pF | Other than VCC, VSS, AVRH, AVRL | 43 |+| Run mode current, PLL | ICC |  | 27 | 35 | mA | CPU 72 MHz, peripheral 36 MHz, instruction on Flash; *1, *5 | 41 |+| Run mode current, High-speed CR | ICC |  | 2.2 | 3.1 | mA | CPU/peripheral 4 MHz, instruction on Flash; *1, *2 | 41 |+| Run mode current, Low-speed CR | ICC |  | 105 | 930 | μA | CPU/peripheral 100 kHz, instruction on Flash; *1 | 41 |+| Sleep mode current, PLL | ICCS |  | 17 | 20 | mA | Peripheral 36 MHz; *1, *5 | 41 |+| Sleep mode current, High-speed CR | ICCS |  | 1.3 | 2.2 | mA | Peripheral 4 MHz; *1, *2 | 41 |+| Timer mode current, Main | ICCT |  | 3.5 | 4.1 | mA | TA = +25°C, LVD off; *1 | 42 |+| Timer mode current, Sub | ICCT |  | 15 | 45 | μA | TA = +25°C, LVD off; *1 | 42 |+| RTC mode current | ICCR |  | 13 | 39 | μA | TA = +25°C, LVD off; *1 | 42 |+| Stop mode current | ICCH |  | 12 | 33 | μA | TA = +25°C, LVD off; *1 | 42 |+| Flash memory write/erase current | ICCFLASH |  | 9.5 | 11.2 | mA | At write/erase | 42 |+| A/D converter power supply current | ICCAD |  | 0.7 | 0.9 | mA | At operation | 42 |+| Reference power supply current | ICCAVRH |  | 1.1 | 1.97 | mA | At operation, AVRH = 5.5 V | 42 |+| LVD power supply current | ICCLVD |  | 0.13 | 0.3 | μA | VCC = 5.5 V, at operation for reset, at not detect | 42 |+| Input frequency, crystal | fCH | 4 |  | 48 | MHz | Crystal oscillator connected, VCC ≥ 4.5 V | 44 |+| Input frequency, crystal | fCH | 4 |  | 20 | MHz | Crystal oscillator connected, VCC < 4.5 V | 44 |+| Input frequency, external clock | fCH | 4 |  | 48 | MHz | When using external clock | 44 |+| Input clock cycle | tCYLH | 20.83 |  | 250 | ns | When using external clock | 44 |+| Internal master clock frequency | fCM |  |  | 72 | MHz |  | 44 |+| Sub clock input clock cycle | tCYLL | 10 |  | 31.25 | μs | When using external clock | 45 |+| Built-in High-speed CR clock frequency | fCRH | 3.88 | 4 | 4.12 | MHz | TA = -40°C to +105°C, 3.6 V < VCC ≤ 5.5 V, when trimming | 46 |+| Built-in High-speed CR clock frequency | fCRH | 2.8 | 4 | 5.2 | MHz | TA = -40°C to +105°C, when not trimming | 46 |+| Frequency stabilization time | tCRWT |  |  | 30 | μs | Time from trim value setting to stable High-speed CR frequency; *2 | 46 |+| Built-in Low-speed CR clock frequency | fCRL | 50 | 100 | 150 | kHz |  | 46 |+| PLL input clock frequency (main clock input) | fPLLI | 4 |  | 16 | MHz | Main clock used as Main PLL input | 47 |+| PLL oscillation stabilization wait time (lock-up time) | tLOCK | 100 |  |  | μs | Main clock used as Main PLL input | 47 |+| Reset input time | tINITX | 500 |  |  | ns |  | 48 |+| Power supply shut down time | tOFF | 1 |  |  | ms | VCC held below 0.2 V | 48 |+| Power ramp rate | dV/dt | 1.2 |  | 1000 | mV/μs | VCC 0.2 V to 2.70 V | 48 |+| Time until releasing power-on reset | tPRT | 0.34 |  | 3.15 | ms |  | 48 |+| Integral nonlinearity |  | -4.5 | 3 | 4.5 | LSB | AVRH = 2.7 V to 5.5 V | 63 |+| Differential nonlinearity |  | -3.5 | 2.5 | 3.5 | LSB | AVRH = 2.7 V to 5.5 V | 63 |+| Sampling time | tS | 0.3 |  | 10 | μs | Depends on external impedance | 63 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| housing | abs |  | Because plastic chip packages are formed from plastic resins, exposure to natural environmental conditions will cause absorption of | 25 |+| contacts |  | tin | Lead-Free Packaging CAUTION: When ball grid array (BGA) packages with Sn-Ag-Cu balls are mounted using Sn-Pb eutectic soldering, junction strength | 25 |++## CAD (KiCad official)++- Symbol: `CY9BF121JPMC-G-JNE2`+- Footprint: `Package_QFP:LQFP-32_7x7mm_P0.8mm`+- 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)+- 3D model files: `cy9bf121jpmc-g-jne2-etched.step` / `cy9bf121jpmc-g-jne2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cy9bf121jpmc-g-jne2.step` / `cy9bf121jpmc-g-jne2.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Infineon Cypress Semicon datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588944152268034048) (79 pp, sha256 `bbf814d761ffaaf9`, retrieved 2026-10-19, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cy9bf121jpmc-g-jne2-datasheet.pdf)

@@ -0,0 +1,788 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "CY9BF121JPMC-G-JNE2",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 32,+      "span_mm": 9.85,+      "dash_mm": 0.2462,+      "gap_mm": 0.1478,+      "pad_stroke_mm": 0.0591+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 9,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 32,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.788,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -4.5,+      4.5,+      -4.5,+      4.5+    ],+    "pads_bbox_mm": [+      -4.925,+      4.925,+      -4.925,+      4.925+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "cy9bf121jpmc-g-jne2-etched.glb",+    "glb_sha256": "c7dc54e48daf9c1bbbb8ecaf364c3d2db959c800b2947ddf8dd2c97930f11648",+    "footprint": "cy9bf121jpmc-g-jne2.kicad_mod",+    "footprint_sha256": "559094141ac5d3003014d58fe64cbe9e5cbb15aeb032c7167446f7fa971610ae",+    "pins": "page.json component.pins",+    "pins_sha256": "730595a35040bac9c3ba6213aea49f816e5db21466d4895d2231728943a15a58"+  },+  "generator": "adom-wiki 1.7.74 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "P3A",+      "x": -5.025,+      "y": -2.8,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "2",+      "text": "P3B",+      "x": -5.025,+      "y": -2.0,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "3",+      "text": "P3C",+      "x": -5.025,+      "y": -1.2,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "4",+      "text": "P3D",+      "x": -5.025,+      "y": -0.4,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "5",+      "text": "P3E",+      "x": -5.025,+      "y": 0.4,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "6",+      "text": "P3F",+      "x": -5.025,+      "y": 1.2,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "7",+      "text": "VCC",+      "x": -5.025,+      "y": 2.0,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "8",+      "text": "C",+      "x": -5.025,+      "y": 2.8,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "9",+      "text": "VSS",+      "x": -2.8,+      "y": 5.025,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "10",+      "text": "PE2/X0",+      "x": -2.0,+      "y": 5.025,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "11",+      "text": "PE3/X1",+      "x": -1.2,+      "y": 5.025,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "12",+      "text": "INITX",+      "x": -0.4,+      "y": 5.025,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "13",+      "text": "P46/X0A",+      "x": 0.4,+      "y": 5.025,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "14",+      "text": "P47/X1A",+      "x": 1.2,+      "y": 5.025,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "15",+      "text": "MD0",+      "x": 2.0,+      "y": 5.025,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "16",+      "text": "PE0/MD1",+      "x": 2.8,+      "y": 5.025,+      "align": "right",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "17",+      "text": "P11",+      "x": 5.025,+      "y": 2.8,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "18",+      "text": "P12",+      "x": 5.025,+      "y": 2.0,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "19",+      "text": "P13",+      "x": 5.025,+      "y": 1.2,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "20",+      "text": "P14",+      "x": 5.025,+      "y": 0.4,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "21",+      "text": "P15",+      "x": 5.025,+      "y": -0.4,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "22",+      "text": "P23",+      "x": 5.025,+      "y": -1.2,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "23",+      "text": "P22",+      "x": 5.025,+      "y": -2.0,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "24",+      "text": "P21",+      "x": 5.025,+      "y": -2.8,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "25",+      "text": "VCC",+      "x": 2.8,+      "y": -5.025,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "26",+      "text": "VSS",+      "x": 2.0,+      "y": -5.025,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "27",+      "text": "AVRL",+      "x": 1.2,+      "y": -5.025,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "28",+      "text": "AVRH",+      "x": 0.4,+      "y": -5.025,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "29",+      "text": "P01/SWCLK",+      "x": -0.4,+      "y": -5.025,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "30",+      "text": "P03/SWDIO",+      "x": -1.2,+      "y": -5.025,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "31",+      "text": "P04/SWO",+      "x": -2.0,+      "y": -5.025,+      "align": "left",+      "vertical": true,+      "h": 0.4+    },+    {+      "pad": "32",+      "text": "P0F/NMIX",+      "x": -2.8,+      "y": -5.025,+      "align": "left",+      "vertical": true,+      "h": 0.4+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -4.175,+        -2.8+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -4.175,+        -2.0+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -4.175,+        -1.2+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -4.175,+        -0.4+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -4.175,+        0.4+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -4.175,+        1.2+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -4.175,+        2.0+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -4.175,+        2.8+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -2.8,+        4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -2.0,+        4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        -1.2,+        4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        -0.4,+        4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        0.4,+        4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        1.2,+        4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        2.0,+        4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        2.8,+        4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        4.175,+        2.8+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        4.175,+        2.0+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        4.175,+        1.2+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        4.175,+        0.4+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        4.175,+        -0.4+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        4.175,+        -1.2+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        4.175,+        -2.0+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        4.175,+        -2.8+      ],+      "size_mm": [+        1.5,+        0.5+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "roundrect",+      "center_mm": [+        2.8,+        -4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "26",+      "shape": "roundrect",+      "center_mm": [+        2.0,+        -4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "27",+      "shape": "roundrect",+      "center_mm": [+        1.2,+        -4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "28",+      "shape": "roundrect",+      "center_mm": [+        0.4,+        -4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "29",+      "shape": "roundrect",+      "center_mm": [+        -0.4,+        -4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "30",+      "shape": "roundrect",+      "center_mm": [+        -1.2,+        -4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "31",+      "shape": "roundrect",+      "center_mm": [+        -2.0,+        -4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    },+    {+      "number": "32",+      "shape": "roundrect",+      "center_mm": [+        -2.8,+        -4.175+      ],+      "size_mm": [+        0.5,+        1.5+      ],+      "rot": 0.0+    }+  ]+}

@@ -0,0 +1,360 @@+(footprint "LQFP-32_7x7mm_P0.8mm"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "LQFP, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT358-1.pdf)")+	(tags "LQFP QFP")+	(property "Reference" "REF**"+		(at 0 -5.88 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "LQFP-32_7x7mm_P0.8mm"+		(at 0 5.88 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "package/gullwing"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -3.61 -3.61)+		(end -3.31 -3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -3.61 -3.31)+		(end -3.61 -3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -3.61 3.61)+		(end -3.61 3.31)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -3.31 3.61)+		(end -3.61 3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.31 -3.61)+		(end 3.61 -3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.61 -3.61)+		(end 3.61 -3.31)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.61 3.31)+		(end 3.61 3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 3.61 3.61)+		(end 3.31 3.61)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -4.25 -3.32)+			(xy -4.59 -3.79)+			(xy -3.91 -3.79)+		)+		(stroke+			(width 0.12)+			(type solid)+		)+		(fill yes)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -2.5 -3.5)+			(xy 3.5 -3.5)+			(xy 3.5 3.5)+			(xy -3.5 3.5)+			(xy -3.5 -2.5)+		)+		(stroke+			(width 0.1)+			(type solid)+		)+		(fill no)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(pad "1" smd roundrect+		(at -4.175 -2.8)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "2" smd roundrect+		(at -4.175 -2)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "3" smd roundrect+		(at -4.175 -1.2)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "4" smd roundrect+		(at -4.175 -0.4)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "5" smd roundrect+		(at -4.175 0.4)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "6" smd roundrect+		(at -4.175 1.2)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "7" smd roundrect+		(at -4.175 2)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "8" smd roundrect+		(at -4.175 2.8)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "9" smd roundrect+		(at -2.8 4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "10" smd roundrect+		(at -2 4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "11" smd roundrect+		(at -1.2 4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "12" smd roundrect+		(at -0.4 4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "13" smd roundrect+		(at 0.4 4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "14" smd roundrect+		(at 1.2 4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "15" smd roundrect+		(at 2 4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "16" smd roundrect+		(at 2.8 4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "17" smd roundrect+		(at 4.175 2.8)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "18" smd roundrect+		(at 4.175 2)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "19" smd roundrect+		(at 4.175 1.2)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "20" smd roundrect+		(at 4.175 0.4)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "21" smd roundrect+		(at 4.175 -0.4)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "22" smd roundrect+		(at 4.175 -1.2)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "23" smd roundrect+		(at 4.175 -2)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "24" smd roundrect+		(at 4.175 -2.8)+		(size 1.5 0.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "25" smd roundrect+		(at 2.8 -4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "26" smd roundrect+		(at 2 -4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "27" smd roundrect+		(at 1.2 -4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "28" smd roundrect+		(at 0.4 -4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "29" smd roundrect+		(at -0.4 -4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "30" smd roundrect+		(at -1.2 -4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "31" smd roundrect+		(at -2 -4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "32" smd roundrect+		(at -2.8 -4.175)+		(size 0.5 1.5)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Package_QFP.3dshapes/LQFP-32_7x7mm_P0.8mm.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+	(fp_poly+		(pts (xy -5.18 -3.30) (xy -3.75 -3.30) (xy -3.75 -3.75) (xy -3.30 -3.75) (xy -3.30 -5.18) (xy 3.30 -5.18) (xy 3.30 -3.75) (xy 3.75 -3.75) (xy 3.75 -3.30) (xy 5.18 -3.30) (xy 5.18 3.30) (xy 3.75 3.30) (xy 3.75 3.75) (xy 3.30 3.75) (xy 3.30 5.18) (xy -3.30 5.18) (xy -3.30 3.75) (xy -3.75 3.75) (xy -3.75 3.30) (xy -5.18 3.30))+		(stroke (width 0.05) (type solid))+		(fill no)+		(layer "F.CrtYd")+	)+)

@@ -0,0 +1,141 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+  (symbol "CY9BF121JPMC-G-JNE2" (in_bom yes) (on_board yes)+    (property "Reference" "U" (at 0 22.86 0) (effects (font (size 1.27 1.27))))+    (property "Value" "CY9BF121JPMC-G-JNE2" (at 0 -25.40 0) (effects (font (size 1.27 1.27))))+    (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+    (symbol "CY9BF121JPMC-G-JNE2_0_1"+    (rectangle (start -12.70 20.32) (end 12.70 -22.86)+      (stroke (width 0.254) (type default)) (fill (type background)))+    )+    (symbol "CY9BF121JPMC-G-JNE2_1_1"+    (pin bidirectional line (at -17.78 17.78 0) (length 5.08)+      (name "P3A" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 15.24 0) (length 5.08)+      (name "P3B" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 12.70 0) (length 5.08)+      (name "P3C" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 10.16 0) (length 5.08)+      (name "P3D" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 7.62 0) (length 5.08)+      (name "P3E" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 5.08 0) (length 5.08)+      (name "P3F" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 2.54 0) (length 5.08)+      (name "VCC" (effects (font (size 1.27 1.27))))+      (number "7" (effects (font (size 1.27 1.27))))+    )+    (pin passive line (at -17.78 0.00 0) (length 5.08)+      (name "C" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -2.54 0) (length 5.08)+      (name "VSS" (effects (font (size 1.27 1.27))))+      (number "9" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -5.08 0) (length 5.08)+      (name "PE2/X0" (effects (font (size 1.27 1.27))))+      (number "10" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+      (name "PE3/X1" (effects (font (size 1.27 1.27))))+      (number "11" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -10.16 0) (length 5.08)+      (name "INITX" (effects (font (size 1.27 1.27))))+      (number "12" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -12.70 0) (length 5.08)+      (name "P46/X0A" (effects (font (size 1.27 1.27))))+      (number "13" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -15.24 0) (length 5.08)+      (name "P47/X1A" (effects (font (size 1.27 1.27))))+      (number "14" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -17.78 0) (length 5.08)+      (name "MD0" (effects (font (size 1.27 1.27))))+      (number "15" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -20.32 0) (length 5.08)+      (name "PE0/MD1" (effects (font (size 1.27 1.27))))+      (number "16" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 17.78 180) (length 5.08)+      (name "P0F/NMIX" (effects (font (size 1.27 1.27))))+      (number "32" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 15.24 180) (length 5.08)+      (name "P04/SWO" (effects (font (size 1.27 1.27))))+      (number "31" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 12.70 180) (length 5.08)+      (name "P03/SWDIO" (effects (font (size 1.27 1.27))))+      (number "30" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 10.16 180) (length 5.08)+      (name "P01/SWCLK" (effects (font (size 1.27 1.27))))+      (number "29" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 7.62 180) (length 5.08)+      (name "AVRH" (effects (font (size 1.27 1.27))))+      (number "28" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 5.08 180) (length 5.08)+      (name "AVRL" (effects (font (size 1.27 1.27))))+      (number "27" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 2.54 180) (length 5.08)+      (name "VSS" (effects (font (size 1.27 1.27))))+      (number "26" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 0.00 180) (length 5.08)+      (name "VCC" (effects (font (size 1.27 1.27))))+      (number "25" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -2.54 180) (length 5.08)+      (name "P21" (effects (font (size 1.27 1.27))))+      (number "24" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+      (name "P22" (effects (font (size 1.27 1.27))))+      (number "23" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+      (name "P23" (effects (font (size 1.27 1.27))))+      (number "22" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -10.16 180) (length 5.08)+      (name "P15" (effects (font (size 1.27 1.27))))+      (number "21" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -12.70 180) (length 5.08)+      (name "P14" (effects (font (size 1.27 1.27))))+      (number "20" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -15.24 180) (length 5.08)+      (name "P13" (effects (font (size 1.27 1.27))))+      (number "19" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -17.78 180) (length 5.08)+      (name "P12" (effects (font (size 1.27 1.27))))+      (number "18" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -20.32 180) (length 5.08)+      (name "P11" (effects (font (size 1.27 1.27))))+      (number "17" (effects (font (size 1.27 1.27))))+    )+    )+  )+)

@@ -0,0 +1,204 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="LQFP-32_7x7mm_P0.8mm">+  <description>LQFP-32, 7 x 7 mm, 0.8 mm pitch</description>+  <smd name="1" x="-4.1750" y="2.8000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="2" x="-4.1750" y="2.0000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="3" x="-4.1750" y="1.2000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="4" x="-4.1750" y="0.4000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="5" x="-4.1750" y="-0.4000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="6" x="-4.1750" y="-1.2000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="7" x="-4.1750" y="-2.0000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="8" x="-4.1750" y="-2.8000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="9" x="-2.8000" y="-4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="10" x="-2.0000" y="-4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="11" x="-1.2000" y="-4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="12" x="-0.4000" y="-4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="13" x="0.4000" y="-4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="14" x="1.2000" y="-4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="15" x="2.0000" y="-4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="16" x="2.8000" y="-4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="17" x="4.1750" y="-2.8000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="18" x="4.1750" y="-2.0000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="19" x="4.1750" y="-1.2000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="20" x="4.1750" y="-0.4000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="21" x="4.1750" y="0.4000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="22" x="4.1750" y="1.2000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="23" x="4.1750" y="2.0000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="24" x="4.1750" y="2.8000" dx="1.5000" dy="0.5000" layer="1" roundness="50"/>+  <smd name="25" x="2.8000" y="4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="26" x="2.0000" y="4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="27" x="1.2000" y="4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="28" x="0.4000" y="4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="29" x="-0.4000" y="4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="30" x="-1.2000" y="4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="31" x="-2.0000" y="4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <smd name="32" x="-2.8000" y="4.1750" dx="0.5000" dy="1.5000" layer="1" roundness="50"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-4.2500" y="3.3200"/>+    <vertex x="-4.5900" y="3.7900"/>+    <vertex x="-3.9100" y="3.7900"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-2.5000" y="3.5000"/>+    <vertex x="3.5000" y="3.5000"/>+    <vertex x="3.5000" y="-3.5000"/>+    <vertex x="-3.5000" y="-3.5000"/>+    <vertex x="-3.5000" y="2.5000"/>+  </polygon>+  <wire x1="-3.6100" y1="3.6100" x2="-3.3100" y2="3.6100" width="0.1200" layer="21"/>+  <wire x1="-3.6100" y1="3.3100" x2="-3.6100" y2="3.6100" width="0.1200" layer="21"/>+  <wire x1="-3.6100" y1="-3.6100" x2="-3.6100" y2="-3.3100" width="0.1200" layer="21"/>+  <wire x1="-3.3100" y1="-3.6100" x2="-3.6100" y2="-3.6100" width="0.1200" layer="21"/>+  <wire x1="3.3100" y1="3.6100" x2="3.6100" y2="3.6100" width="0.1200" layer="21"/>+  <wire x1="3.6100" y1="3.6100" x2="3.6100" y2="3.3100" width="0.1200" layer="21"/>+  <wire x1="3.6100" y1="-3.3100" x2="3.6100" y2="-3.6100" width="0.1200" layer="21"/>+  <wire x1="3.6100" y1="-3.6100" x2="3.3100" y2="-3.6100" width="0.1200" layer="21"/>+  <text x="0" y="5.525" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-5.525" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="CY9BF121JPMC-G-JNE2">+  <wire x1="-12.7" y1="20.32" x2="12.7" y2="20.32" width="0.254" layer="94"/>+  <wire x1="12.7" y1="20.32" x2="12.7" y2="-22.86" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-22.86" x2="-12.7" y2="-22.86" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-22.86" x2="-12.7" y2="20.32" width="0.254" layer="94"/>+  <text x="0.0000" y="22.8600" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-25.4000" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="P3A" x="-17.78" y="17.78" length="middle" direction="io"/>+  <pin name="P3B" x="-17.78" y="15.24" length="middle" direction="io"/>+  <pin name="P3C" x="-17.78" y="12.7" length="middle" direction="io"/>+  <pin name="P3D" x="-17.78" y="10.16" length="middle" direction="io"/>+  <pin name="P3E" x="-17.78" y="7.62" length="middle" direction="io"/>+  <pin name="P3F" x="-17.78" y="5.08" length="middle" direction="io"/>+  <pin name="VCC" x="-17.78" y="2.54" length="middle" direction="pwr"/>+  <pin name="C" x="-17.78" y="0" length="middle" direction="pas"/>+  <pin name="VSS" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+  <pin name="PE2/X0" x="-17.78" y="-5.08" length="middle" direction="in"/>+  <pin name="PE3/X1" x="-17.78" y="-7.62" length="middle" direction="io"/>+  <pin name="INITX" x="-17.78" y="-10.16" length="middle" direction="in"/>+  <pin name="P46/X0A" x="-17.78" y="-12.7" length="middle" direction="io"/>+  <pin name="P47/X1A" x="-17.78" y="-15.24" length="middle" direction="io"/>+  <pin name="MD0" x="-17.78" y="-17.78" length="middle" direction="in"/>+  <pin name="PE0/MD1" x="-17.78" y="-20.32" length="middle" direction="in"/>+  <pin name="P0F/NMIX" x="17.78" y="17.78" length="middle" direction="io" rot="R180"/>+  <pin name="P04/SWO" x="17.78" y="15.24" length="middle" direction="io" rot="R180"/>+  <pin name="P03/SWDIO" x="17.78" y="12.7" length="middle" direction="io" rot="R180"/>+  <pin name="P01/SWCLK" x="17.78" y="10.16" length="middle" direction="io" rot="R180"/>+  <pin name="AVRH" x="17.78" y="7.62" length="middle" direction="pwr" rot="R180"/>+  <pin name="AVRL" x="17.78" y="5.08" length="middle" direction="pwr" rot="R180"/>+  <pin name="VSS@2" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>+  <pin name="VCC@2" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>+  <pin name="P21" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="P22" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+  <pin name="P23" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>+  <pin name="P15" x="17.78" y="-10.16" length="middle" direction="io" rot="R180"/>+  <pin name="P14" x="17.78" y="-12.7" length="middle" direction="io" rot="R180"/>+  <pin name="P13" x="17.78" y="-15.24" length="middle" direction="io" rot="R180"/>+  <pin name="P12" x="17.78" y="-17.78" length="middle" direction="io" rot="R180"/>+  <pin name="P11" x="17.78" y="-20.32" length="middle" direction="io" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="CY9BF121JPMC-G-JNE2" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="CY9BF121JPMC-G-JNE2" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="LQFP-32_7x7mm_P0.8mm">+      <connects>+        <connect gate="G$1" pin="P3A" pad="1"/>+        <connect gate="G$1" pin="P3B" pad="2"/>+        <connect gate="G$1" pin="P3C" pad="3"/>+        <connect gate="G$1" pin="P3D" pad="4"/>+        <connect gate="G$1" pin="P3E" pad="5"/>+        <connect gate="G$1" pin="P3F" pad="6"/>+        <connect gate="G$1" pin="VCC" pad="7"/>+        <connect gate="G$1" pin="C" pad="8"/>+        <connect gate="G$1" pin="VSS" pad="9"/>+        <connect gate="G$1" pin="PE2/X0" pad="10"/>+        <connect gate="G$1" pin="PE3/X1" pad="11"/>+        <connect gate="G$1" pin="INITX" pad="12"/>+        <connect gate="G$1" pin="P46/X0A" pad="13"/>+        <connect gate="G$1" pin="P47/X1A" pad="14"/>+        <connect gate="G$1" pin="MD0" pad="15"/>+        <connect gate="G$1" pin="PE0/MD1" pad="16"/>+        <connect gate="G$1" pin="P0F/NMIX" pad="32"/>+        <connect gate="G$1" pin="P04/SWO" pad="31"/>+        <connect gate="G$1" pin="P03/SWDIO" pad="30"/>+        <connect gate="G$1" pin="P01/SWCLK" pad="29"/>+        <connect gate="G$1" pin="AVRH" pad="28"/>+        <connect gate="G$1" pin="AVRL" pad="27"/>+        <connect gate="G$1" pin="VSS@2" pad="26"/>+        <connect gate="G$1" pin="VCC@2" pad="25"/>+        <connect gate="G$1" pin="P21" pad="24"/>+        <connect gate="G$1" pin="P22" pad="23"/>+        <connect gate="G$1" pin="P23" pad="22"/>+        <connect gate="G$1" pin="P15" pad="21"/>+        <connect gate="G$1" pin="P14" pad="20"/>+        <connect gate="G$1" pin="P13" pad="19"/>+        <connect gate="G$1" pin="P12" pad="18"/>+        <connect gate="G$1" pin="P11" pad="17"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file

@@ -0,0 +1,10254 @@+ISO-10303-21;+HEADER;+/* LQFP-32_7x7mm_P0.8mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of LQFP-32_7x7mm_P0.8mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'LQFP-32_7x7mm_P0.8mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('LQFP-32_7x7mm_P0.8mm','LQFP-32_7x7mm_P0.8mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#9670);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#107,#160,#173,#194,#219,#237,#258,#276,#297,#315,#336,#354,#375,#393,#414,#432,#453,#471,#492,#509,#522,#599,#676,#689,#702,#775,#790,#805,#851,#921,#937,#990,#1006,#1066,#1082,#1135,#1151,#1211,#1227,#1280,#1296,#1356,#1372,#1425,#1441,#1501,#1517,#1570,#1586,#1646,#1662,#1715,#1731,#1791,#1807,#1860,#1876,#1936,#1952,#2005,#2037,#2055,#2080,#2098,#2119,#2137,#2158,#2176,#2197,#2215,#2236,#2254,#2275,#2293,#2314,#2332,#2353,#2363,#2375,#2396,#2414,#2435,#2453,#2474,#2492,#2513,#2531,#2552,#2570,#2591,#2609,#2630,#2648,#2669,#2686,#2701,#2716,#2732,#2757,#2775,#2796,#2814,#2835,#2853,#2874,#2892,#2913,#2931,#2952,#2970,#2991,#3009,#3030,#3043,#3067,#3145,#3159,#3197,#3209,#3219,#3230,#3240,#3250,#3260,#3270,#3280,#3289,#3301,#3311,#3321,#3331,#3341,#3351,#3361,#3371,#3379,#3391,#3401,#3411,#3421,#3431,#3441,#3451,#3461,#3469,#3481,#3491,#3501,#3511,#3521,#3531,#3541,#3551,#3559,#3571,#3581,#3591,#3601,#3611,#3621,#3631,#3641,#3649,#3661,#3671,#3681,#3691,#3701,#3711,#3721,#3731,#3739,#3751,#3761,#3771,#3781,#3791,#3801,#3811,#3821,#3829,#3841,#3851,#3861,#3871,#3881,#3891,#3901,#3911,#3919,#3933,#4011,#4031,#4059,#4131,#4149,#4202,#4213,#4273,#4290,#4343,#4354,#4414,#4431,#4484,#4495,#4555,#4572,#4625,#4636,#4696,#4713,#4766,#4777,#4837,#4854,#4907,#4918,#4978,#4995,#5048,#5056,#5114,#5131,#5179,#5245,#5261,#5309,#5319,#5379,#5395,#5448,#5459,#5519,#5535,#5588,#5599,#5659,#5675,#5728,#5739,#5799,#5815,#5868,#5879,#5939,#5955,#6008,#6019,#6079,#6095,#6148,#6159,#6219,#6235,#6288,#6309,#6378,#6394,#6447,#6463,#6523,#6539,#6592,#6608,#6668,#6684,#6737,#6753,#6813,#6829,#6882,#6898,#6958,#6974,#7027,#7043,#7103,#7119,#7172,#7188,#7248,#7264,#7317,#7333,#7393,#7409,#7460,#7470,#7482,#7494,#7506,#7518,#7530,#7542,#7554,#7583,#7592,#7604,#7616,#7628,#7640,#7652,#7664,#7676,#7685,#7695,#7708,#7738,#7748,#7759,#7769,#7779,#7789,#7799,#7809,#7818,#7828,#7838,#7848,#7858,#7868,#7878,#7888,#7896,#7906,#7916,#7926,#7936,#7946,#7956,#7966,#7974,#7984,#7994,#8004,#8014,#8024,#8034,#8044,#8052,#8062,#8072,#8082,#8092,#8102,#8112,#8122,#8130,#8140,#8150,#8160,#8170,#8180,#8190,#8200,#8208,#8218,#8228,#8238,#8248,#8258,#8268,#8278,#8286,#8296,#8306,#8316,#8326,#8336,#8346,#8354,#8365,#8374,#8384,#8394,#8404,#8414,#8423,#8433,#8443,#8452,#8462,#8472,#8482,#8492,#8500,#8510,#8520,#8529,#8539,#8549,#8559,#8569,#8577,#8587,#8597,#8606,#8616,#8626,#8636,#8646,#8654,#8664,#8674,#8683,#8693,#8703,#8713,#8723,#8731,#8741,#8751,#8760,#8770,#8780,#8790,#8800,#8808,#8818,#8828,#8837,#8847,#8857,#8867,#8877,#8885,#8895,#8905,#8914,#8924,#8934,#8944,#8954,#8962,#8974,#8984,#8995,#9004,#9014,#9024,#9034,#9044,#9053,#9065,#9075,#9085,#9094,#9104,#9114,#9124,#9134,#9142,#9154,#9164,#9174,#9183,#9193,#9203,#9213,#9223,#9231,#9243,#9253,#9263,#9272,#9282,#9292,#9302,#9312,#9320,#9332,#9342,#9352,#9361,#9371,#9381,#9391,#9401,#9409,#9421,#9431,#9441,#9450,#9460,#9470,#9480,#9490,#9498,#9510,#9520,#9530,#9539,#9549,#9559,#9569,#9579,#9587,#9597,#9607,#9616,#9626,#9636,#9646,#9656,#9664));+#17=ADVANCED_FACE('',(#18),#106,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#29,#34,#40,#44,#48,#52,#56,#60,#64,#68,#72,#76,#80,#84,#88,#92,#96,#100,#103));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(-3.255919117457,3.361838234914,0.1));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(3.255919117457,3.361838234914,0.1));+#26=LINE('',#23,#27);+#27=VECTOR('',#28,1.);+#28=DIRECTION('',(1.,1.110223024625E-16,0.));+#29=ORIENTED_EDGE('',*,*,#30,.T.);+#30=EDGE_CURVE('',#24,#31,#33,.T.);+#31=VERTEX_POINT('',#32);+#32=CARTESIAN_POINT('',(3.325,3.5,0.75));+#33=B_SPLINE_CURVE_WITH_KNOTS('',1,(#25,#32),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#34=ORIENTED_EDGE('',*,*,#35,.F.);+#35=EDGE_CURVE('',#36,#31,#38,.T.);+#36=VERTEX_POINT('',#37);+#37=CARTESIAN_POINT('',(2.975,3.5,0.75));+#38=LINE('',#39,#27);+#39=CARTESIAN_POINT('',(-3.325,3.5,0.75));+#40=ORIENTED_EDGE('',*,*,#41,.F.);+#41=EDGE_CURVE('',#42,#36,#38,.T.);+#42=VERTEX_POINT('',#43);+#43=CARTESIAN_POINT('',(2.625,3.5,0.75));+#44=ORIENTED_EDGE('',*,*,#45,.F.);+#45=EDGE_CURVE('',#46,#42,#38,.T.);+#46=VERTEX_POINT('',#47);+#47=CARTESIAN_POINT('',(2.175,3.5,0.75));+#48=ORIENTED_EDGE('',*,*,#49,.F.);+#49=EDGE_CURVE('',#50,#46,#38,.T.);+#50=VERTEX_POINT('',#51);+#51=CARTESIAN_POINT('',(1.825,3.5,0.75));+#52=ORIENTED_EDGE('',*,*,#53,.F.);+#53=EDGE_CURVE('',#54,#50,#38,.T.);+#54=VERTEX_POINT('',#55);+#55=CARTESIAN_POINT('',(1.375,3.5,0.75));+#56=ORIENTED_EDGE('',*,*,#57,.F.);+#57=EDGE_CURVE('',#58,#54,#38,.T.);+#58=VERTEX_POINT('',#59);+#59=CARTESIAN_POINT('',(1.025,3.5,0.75));+#60=ORIENTED_EDGE('',*,*,#61,.F.);+#61=EDGE_CURVE('',#62,#58,#38,.T.);+#62=VERTEX_POINT('',#63);+#63=CARTESIAN_POINT('',(0.575,3.5,0.75));+#64=ORIENTED_EDGE('',*,*,#65,.F.);+#65=EDGE_CURVE('',#66,#62,#38,.T.);+#66=VERTEX_POINT('',#67);+#67=CARTESIAN_POINT('',(0.225,3.5,0.75));+#68=ORIENTED_EDGE('',*,*,#69,.F.);+#69=EDGE_CURVE('',#70,#66,#38,.T.);+#70=VERTEX_POINT('',#71);+#71=CARTESIAN_POINT('',(-0.225,3.5,0.75));+#72=ORIENTED_EDGE('',*,*,#73,.F.);+#73=EDGE_CURVE('',#74,#70,#38,.T.);+#74=VERTEX_POINT('',#75);+#75=CARTESIAN_POINT('',(-0.575,3.5,0.75));+#76=ORIENTED_EDGE('',*,*,#77,.F.);+#77=EDGE_CURVE('',#78,#74,#38,.T.);+#78=VERTEX_POINT('',#79);+#79=CARTESIAN_POINT('',(-1.025,3.5,0.75));+#80=ORIENTED_EDGE('',*,*,#81,.F.);+#81=EDGE_CURVE('',#82,#78,#38,.T.);+#82=VERTEX_POINT('',#83);+#83=CARTESIAN_POINT('',(-1.375,3.5,0.75));+#84=ORIENTED_EDGE('',*,*,#85,.F.);+#85=EDGE_CURVE('',#86,#82,#38,.T.);+#86=VERTEX_POINT('',#87);+#87=CARTESIAN_POINT('',(-1.825,3.5,0.75));+#88=ORIENTED_EDGE('',*,*,#89,.F.);+#89=EDGE_CURVE('',#90,#86,#38,.T.);+#90=VERTEX_POINT('',#91);+#91=CARTESIAN_POINT('',(-2.175,3.5,0.75));+#92=ORIENTED_EDGE('',*,*,#93,.F.);+#93=EDGE_CURVE('',#94,#90,#38,.T.);+#94=VERTEX_POINT('',#95);+#95=CARTESIAN_POINT('',(-2.625,3.5,0.75));+#96=ORIENTED_EDGE('',*,*,#97,.F.);+#97=EDGE_CURVE('',#98,#94,#38,.T.);+#98=VERTEX_POINT('',#99);+#99=CARTESIAN_POINT('',(-2.975,3.5,0.75));+#100=ORIENTED_EDGE('',*,*,#101,.F.);+#101=EDGE_CURVE('',#102,#98,#38,.T.);+#102=VERTEX_POINT('',#39);+#103=ORIENTED_EDGE('',*,*,#104,.F.);+#104=EDGE_CURVE('',#22,#102,#105,.T.);+#105=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#39),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#106=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#39),(#25,#32)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#107=ADVANCED_FACE('',(#108),#157,.F.);+#108=FACE_BOUND('',#109,.T.);+#109=EDGE_LOOP('',(#20,#110,#117,#124,#131,#138,#145,#152));+#110=ORIENTED_EDGE('',*,*,#111,.T.);+#111=EDGE_CURVE('',#24,#112,#114,.T.);+#112=VERTEX_POINT('',#113);+#113=CARTESIAN_POINT('',(3.361838234914,3.255919117457,0.1));+#114=LINE('',#25,#115);+#115=VECTOR('',#116,1.);+#116=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#117=ORIENTED_EDGE('',*,*,#118,.T.);+#118=EDGE_CURVE('',#112,#119,#121,.T.);+#119=VERTEX_POINT('',#120);+#120=CARTESIAN_POINT('',(3.361838234914,-3.255919117457,0.1));+#121=LINE('',#113,#122);+#122=VECTOR('',#123,1.);+#123=DIRECTION('',(1.110223024625E-16,-1.,0.));+#124=ORIENTED_EDGE('',*,*,#125,.T.);+#125=EDGE_CURVE('',#119,#126,#128,.T.);+#126=VERTEX_POINT('',#127);+#127=CARTESIAN_POINT('',(3.255919117457,-3.361838234914,0.1));+#128=LINE('',#120,#129);+#129=VECTOR('',#130,1.);+#130=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#131=ORIENTED_EDGE('',*,*,#132,.T.);+#132=EDGE_CURVE('',#126,#133,#135,.T.);+#133=VERTEX_POINT('',#134);+#134=CARTESIAN_POINT('',(-3.255919117457,-3.361838234914,0.1));+#135=LINE('',#127,#136);+#136=VECTOR('',#137,1.);+#137=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#138=ORIENTED_EDGE('',*,*,#139,.T.);+#139=EDGE_CURVE('',#133,#140,#142,.T.);+#140=VERTEX_POINT('',#141);+#141=CARTESIAN_POINT('',(-3.361838234914,-3.255919117457,0.1));+#142=LINE('',#134,#143);+#143=VECTOR('',#144,1.);+#144=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#145=ORIENTED_EDGE('',*,*,#146,.T.);+#146=EDGE_CURVE('',#140,#147,#149,.T.);+#147=VERTEX_POINT('',#148);+#148=CARTESIAN_POINT('',(-3.361838234914,3.255919117457,0.1));+#149=LINE('',#141,#150);+#150=VECTOR('',#151,1.);+#151=DIRECTION('',(-1.110223024625E-16,1.,0.));+#152=ORIENTED_EDGE('',*,*,#153,.T.);+#153=EDGE_CURVE('',#147,#22,#154,.T.);+#154=LINE('',#148,#155);+#155=VECTOR('',#156,1.);+#156=DIRECTION('',(0.707106781187,0.707106781187,0.));+#157=PLANE('',#158);+#158=AXIS2_PLACEMENT_3D('',#23,#13,#159);+#159=DIRECTION('',(0.695700230156,-0.718332227984,0.));+#160=ADVANCED_FACE('',(#161),#172,.F.);+#161=FACE_BOUND('',#162,.F.);+#162=EDGE_LOOP('',(#110,#163,#168,#171));+#163=ORIENTED_EDGE('',*,*,#164,.T.);+#164=EDGE_CURVE('',#112,#165,#167,.T.);+#165=VERTEX_POINT('',#166);+#166=CARTESIAN_POINT('',(3.5,3.325,0.75));+#167=B_SPLINE_CURVE_WITH_KNOTS('',1,(#113,#166),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#168=ORIENTED_EDGE('',*,*,#169,.F.);+#169=EDGE_CURVE('',#31,#165,#170,.T.);+#170=LINE('',#32,#115);+#171=ORIENTED_EDGE('',*,*,#30,.F.);+#172=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#25,#32),(#113,#166)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#173=ADVANCED_FACE('',(#174),#192,.F.);+#174=FACE_BOUND('',#175,.F.);+#175=EDGE_LOOP('',(#176,#181,#182,#189));+#176=ORIENTED_EDGE('',*,*,#177,.F.);+#177=EDGE_CURVE('',#102,#178,#180,.T.);+#178=VERTEX_POINT('',#179);+#179=CARTESIAN_POINT('',(-3.325,3.5,0.85));+#180=B_SPLINE_CURVE_WITH_KNOTS('',1,(#39,#179),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#181=ORIENTED_EDGE('',*,*,#101,.T.);+#182=ORIENTED_EDGE('',*,*,#183,.T.);+#183=EDGE_CURVE('',#98,#184,#186,.T.);+#184=VERTEX_POINT('',#185);+#185=CARTESIAN_POINT('',(-2.975,3.5,0.85));+#186=LINE('',#187,#188);+#187=CARTESIAN_POINT('',(-2.975,3.5,0.630119079428));+#188=VECTOR('',#13,1.);+#189=ORIENTED_EDGE('',*,*,#190,.F.);+#190=EDGE_CURVE('',#178,#184,#191,.T.);+#191=LINE('',#179,#27);+#192=PLANE('',#193);+#193=AXIS2_PLACEMENT_3D('',#179,#123,#28);+#194=ADVANCED_FACE('',(#195),#217,.F.);+#195=FACE_BOUND('',#196,.F.);+#196=EDGE_LOOP('',(#197,#205,#206,#212));+#197=ORIENTED_EDGE('',*,*,#198,.F.);+#198=EDGE_CURVE('',#98,#199,#201,.T.);+#199=VERTEX_POINT('',#200);+#200=CARTESIAN_POINT('',(-2.975,3.7,0.75));+#201=LINE('',#202,#203);+#202=CARTESIAN_POINT('',(-2.975,3.35,0.75));+#203=VECTOR('',#204,1.);+#204=DIRECTION('',(0.,1.,0.));+#205=ORIENTED_EDGE('',*,*,#97,.T.);+#206=ORIENTED_EDGE('',*,*,#207,.T.);+#207=EDGE_CURVE('',#94,#208,#210,.T.);+#208=VERTEX_POINT('',#209);+#209=CARTESIAN_POINT('',(-2.625,3.7,0.75));+#210=LINE('',#211,#203);+#211=CARTESIAN_POINT('',(-2.625,3.35,0.75));+#212=ORIENTED_EDGE('',*,*,#213,.F.);+#213=EDGE_CURVE('',#199,#208,#214,.T.);+#214=LINE('',#200,#215);+#215=VECTOR('',#216,1.);+#216=DIRECTION('',(1.,0.,0.));+#217=PLANE('',#218);+#218=AXIS2_PLACEMENT_3D('',#202,#13,#204);+#219=ADVANCED_FACE('',(#220),#192,.F.);+#220=FACE_BOUND('',#221,.F.);+#221=EDGE_LOOP('',(#222,#228,#229,#235));+#222=ORIENTED_EDGE('',*,*,#223,.F.);+#223=EDGE_CURVE('',#94,#224,#226,.T.);+#224=VERTEX_POINT('',#225);+#225=CARTESIAN_POINT('',(-2.625,3.5,0.85));+#226=LINE('',#227,#188);+#227=CARTESIAN_POINT('',(-2.625,3.5,0.630119079428));+#228=ORIENTED_EDGE('',*,*,#93,.T.);+#229=ORIENTED_EDGE('',*,*,#230,.T.);+#230=EDGE_CURVE('',#90,#231,#233,.T.);+#231=VERTEX_POINT('',#232);+#232=CARTESIAN_POINT('',(-2.175,3.5,0.85));+#233=LINE('',#234,#188);+#234=CARTESIAN_POINT('',(-2.175,3.5,0.630119079428));+#235=ORIENTED_EDGE('',*,*,#236,.F.);+#236=EDGE_CURVE('',#224,#231,#191,.T.);+#237=ADVANCED_FACE('',(#238),#256,.F.);+#238=FACE_BOUND('',#239,.F.);+#239=EDGE_LOOP('',(#240,#246,#247,#253));+#240=ORIENTED_EDGE('',*,*,#241,.F.);+#241=EDGE_CURVE('',#90,#242,#244,.T.);+#242=VERTEX_POINT('',#243);+#243=CARTESIAN_POINT('',(-2.175,3.7,0.75));+#244=LINE('',#245,#203);+#245=CARTESIAN_POINT('',(-2.175,3.35,0.75));+#246=ORIENTED_EDGE('',*,*,#89,.T.);+#247=ORIENTED_EDGE('',*,*,#248,.T.);+#248=EDGE_CURVE('',#86,#249,#251,.T.);+#249=VERTEX_POINT('',#250);+#250=CARTESIAN_POINT('',(-1.825,3.7,0.75));+#251=LINE('',#252,#203);+#252=CARTESIAN_POINT('',(-1.825,3.35,0.75));+#253=ORIENTED_EDGE('',*,*,#254,.F.);+#254=EDGE_CURVE('',#242,#249,#255,.T.);+#255=LINE('',#243,#215);+#256=PLANE('',#257);+#257=AXIS2_PLACEMENT_3D('',#245,#13,#204);+#258=ADVANCED_FACE('',(#259),#192,.F.);+#259=FACE_BOUND('',#260,.F.);+#260=EDGE_LOOP('',(#261,#267,#268,#274));+#261=ORIENTED_EDGE('',*,*,#262,.F.);+#262=EDGE_CURVE('',#86,#263,#265,.T.);+#263=VERTEX_POINT('',#264);+#264=CARTESIAN_POINT('',(-1.825,3.5,0.85));+#265=LINE('',#266,#188);+#266=CARTESIAN_POINT('',(-1.825,3.5,0.630119079428));+#267=ORIENTED_EDGE('',*,*,#85,.T.);+#268=ORIENTED_EDGE('',*,*,#269,.T.);+#269=EDGE_CURVE('',#82,#270,#272,.T.);+#270=VERTEX_POINT('',#271);+#271=CARTESIAN_POINT('',(-1.375,3.5,0.85));+#272=LINE('',#273,#188);+#273=CARTESIAN_POINT('',(-1.375,3.5,0.630119079428));+#274=ORIENTED_EDGE('',*,*,#275,.F.);+#275=EDGE_CURVE('',#263,#270,#191,.T.);+#276=ADVANCED_FACE('',(#277),#295,.F.);+#277=FACE_BOUND('',#278,.F.);+#278=EDGE_LOOP('',(#279,#285,#286,#292));+#279=ORIENTED_EDGE('',*,*,#280,.F.);+#280=EDGE_CURVE('',#82,#281,#283,.T.);+#281=VERTEX_POINT('',#282);+#282=CARTESIAN_POINT('',(-1.375,3.7,0.75));+#283=LINE('',#284,#203);+#284=CARTESIAN_POINT('',(-1.375,3.35,0.75));+#285=ORIENTED_EDGE('',*,*,#81,.T.);+#286=ORIENTED_EDGE('',*,*,#287,.T.);+#287=EDGE_CURVE('',#78,#288,#290,.T.);+#288=VERTEX_POINT('',#289);+#289=CARTESIAN_POINT('',(-1.025,3.7,0.75));+#290=LINE('',#291,#203);+#291=CARTESIAN_POINT('',(-1.025,3.35,0.75));+#292=ORIENTED_EDGE('',*,*,#293,.F.);+#293=EDGE_CURVE('',#281,#288,#294,.T.);+#294=LINE('',#282,#215);+#295=PLANE('',#296);+#296=AXIS2_PLACEMENT_3D('',#284,#13,#204);+#297=ADVANCED_FACE('',(#298),#192,.F.);+#298=FACE_BOUND('',#299,.F.);+#299=EDGE_LOOP('',(#300,#306,#307,#313));+#300=ORIENTED_EDGE('',*,*,#301,.F.);+#301=EDGE_CURVE('',#78,#302,#304,.T.);+#302=VERTEX_POINT('',#303);+#303=CARTESIAN_POINT('',(-1.025,3.5,0.85));+#304=LINE('',#305,#188);+#305=CARTESIAN_POINT('',(-1.025,3.5,0.630119079428));+#306=ORIENTED_EDGE('',*,*,#77,.T.);+#307=ORIENTED_EDGE('',*,*,#308,.T.);+#308=EDGE_CURVE('',#74,#309,#311,.T.);+#309=VERTEX_POINT('',#310);+#310=CARTESIAN_POINT('',(-0.575,3.5,0.85));+#311=LINE('',#312,#188);+#312=CARTESIAN_POINT('',(-0.575,3.5,0.630119079428));+#313=ORIENTED_EDGE('',*,*,#314,.F.);+#314=EDGE_CURVE('',#302,#309,#191,.T.);+#315=ADVANCED_FACE('',(#316),#334,.F.);+#316=FACE_BOUND('',#317,.F.);+#317=EDGE_LOOP('',(#318,#324,#325,#331));+#318=ORIENTED_EDGE('',*,*,#319,.F.);+#319=EDGE_CURVE('',#74,#320,#322,.T.);+#320=VERTEX_POINT('',#321);+#321=CARTESIAN_POINT('',(-0.575,3.7,0.75));+#322=LINE('',#323,#203);+#323=CARTESIAN_POINT('',(-0.575,3.35,0.75));+#324=ORIENTED_EDGE('',*,*,#73,.T.);+#325=ORIENTED_EDGE('',*,*,#326,.T.);+#326=EDGE_CURVE('',#70,#327,#329,.T.);+#327=VERTEX_POINT('',#328);+#328=CARTESIAN_POINT('',(-0.225,3.7,0.75));+#329=LINE('',#330,#203);+#330=CARTESIAN_POINT('',(-0.225,3.35,0.75));+#331=ORIENTED_EDGE('',*,*,#332,.F.);+#332=EDGE_CURVE('',#320,#327,#333,.T.);+#333=LINE('',#321,#215);+#334=PLANE('',#335);+#335=AXIS2_PLACEMENT_3D('',#323,#13,#204);+#336=ADVANCED_FACE('',(#337),#192,.F.);+#337=FACE_BOUND('',#338,.F.);+#338=EDGE_LOOP('',(#339,#345,#346,#352));+#339=ORIENTED_EDGE('',*,*,#340,.F.);+#340=EDGE_CURVE('',#70,#341,#343,.T.);+#341=VERTEX_POINT('',#342);+#342=CARTESIAN_POINT('',(-0.225,3.5,0.85));+#343=LINE('',#344,#188);+#344=CARTESIAN_POINT('',(-0.225,3.5,0.630119079428));+#345=ORIENTED_EDGE('',*,*,#69,.T.);+#346=ORIENTED_EDGE('',*,*,#347,.T.);+#347=EDGE_CURVE('',#66,#348,#350,.T.);+#348=VERTEX_POINT('',#349);+#349=CARTESIAN_POINT('',(0.225,3.5,0.85));+#350=LINE('',#351,#188);+#351=CARTESIAN_POINT('',(0.225,3.5,0.630119079428));+#352=ORIENTED_EDGE('',*,*,#353,.F.);+#353=EDGE_CURVE('',#341,#348,#191,.T.);+#354=ADVANCED_FACE('',(#355),#373,.F.);+#355=FACE_BOUND('',#356,.F.);+#356=EDGE_LOOP('',(#357,#363,#364,#370));+#357=ORIENTED_EDGE('',*,*,#358,.F.);+#358=EDGE_CURVE('',#66,#359,#361,.T.);+#359=VERTEX_POINT('',#360);+#360=CARTESIAN_POINT('',(0.225,3.7,0.75));+#361=LINE('',#362,#203);+#362=CARTESIAN_POINT('',(0.225,3.35,0.75));+#363=ORIENTED_EDGE('',*,*,#65,.T.);+#364=ORIENTED_EDGE('',*,*,#365,.T.);+#365=EDGE_CURVE('',#62,#366,#368,.T.);+#366=VERTEX_POINT('',#367);+#367=CARTESIAN_POINT('',(0.575,3.7,0.75));+#368=LINE('',#369,#203);+#369=CARTESIAN_POINT('',(0.575,3.35,0.75));+#370=ORIENTED_EDGE('',*,*,#371,.F.);+#371=EDGE_CURVE('',#359,#366,#372,.T.);+#372=LINE('',#360,#215);+#373=PLANE('',#374);+#374=AXIS2_PLACEMENT_3D('',#362,#13,#204);+#375=ADVANCED_FACE('',(#376),#192,.F.);+#376=FACE_BOUND('',#377,.F.);+#377=EDGE_LOOP('',(#378,#384,#385,#391));+#378=ORIENTED_EDGE('',*,*,#379,.F.);+#379=EDGE_CURVE('',#62,#380,#382,.T.);+#380=VERTEX_POINT('',#381);+#381=CARTESIAN_POINT('',(0.575,3.5,0.85));+#382=LINE('',#383,#188);+#383=CARTESIAN_POINT('',(0.575,3.5,0.630119079428));+#384=ORIENTED_EDGE('',*,*,#61,.T.);+#385=ORIENTED_EDGE('',*,*,#386,.T.);+#386=EDGE_CURVE('',#58,#387,#389,.T.);+#387=VERTEX_POINT('',#388);+#388=CARTESIAN_POINT('',(1.025,3.5,0.85));+#389=LINE('',#390,#188);+#390=CARTESIAN_POINT('',(1.025,3.5,0.630119079428));+#391=ORIENTED_EDGE('',*,*,#392,.F.);+#392=EDGE_CURVE('',#380,#387,#191,.T.);+#393=ADVANCED_FACE('',(#394),#412,.F.);+#394=FACE_BOUND('',#395,.F.);+#395=EDGE_LOOP('',(#396,#402,#403,#409));+#396=ORIENTED_EDGE('',*,*,#397,.F.);+#397=EDGE_CURVE('',#58,#398,#400,.T.);+#398=VERTEX_POINT('',#399);+#399=CARTESIAN_POINT('',(1.025,3.7,0.75));+#400=LINE('',#401,#203);+#401=CARTESIAN_POINT('',(1.025,3.35,0.75));+#402=ORIENTED_EDGE('',*,*,#57,.T.);+#403=ORIENTED_EDGE('',*,*,#404,.T.);+#404=EDGE_CURVE('',#54,#405,#407,.T.);+#405=VERTEX_POINT('',#406);+#406=CARTESIAN_POINT('',(1.375,3.7,0.75));+#407=LINE('',#408,#203);+#408=CARTESIAN_POINT('',(1.375,3.35,0.75));+#409=ORIENTED_EDGE('',*,*,#410,.F.);+#410=EDGE_CURVE('',#398,#405,#411,.T.);+#411=LINE('',#399,#215);+#412=PLANE('',#413);+#413=AXIS2_PLACEMENT_3D('',#401,#13,#204);+#414=ADVANCED_FACE('',(#415),#192,.F.);+#415=FACE_BOUND('',#416,.F.);+#416=EDGE_LOOP('',(#417,#423,#424,#430));+#417=ORIENTED_EDGE('',*,*,#418,.F.);+#418=EDGE_CURVE('',#54,#419,#421,.T.);+#419=VERTEX_POINT('',#420);+#420=CARTESIAN_POINT('',(1.375,3.5,0.85));+#421=LINE('',#422,#188);+#422=CARTESIAN_POINT('',(1.375,3.5,0.630119079428));+#423=ORIENTED_EDGE('',*,*,#53,.T.);+#424=ORIENTED_EDGE('',*,*,#425,.T.);+#425=EDGE_CURVE('',#50,#426,#428,.T.);+#426=VERTEX_POINT('',#427);+#427=CARTESIAN_POINT('',(1.825,3.5,0.85));+#428=LINE('',#429,#188);+#429=CARTESIAN_POINT('',(1.825,3.5,0.630119079428));+#430=ORIENTED_EDGE('',*,*,#431,.F.);+#431=EDGE_CURVE('',#419,#426,#191,.T.);+#432=ADVANCED_FACE('',(#433),#451,.F.);+#433=FACE_BOUND('',#434,.F.);+#434=EDGE_LOOP('',(#435,#441,#442,#448));+#435=ORIENTED_EDGE('',*,*,#436,.F.);+#436=EDGE_CURVE('',#50,#437,#439,.T.);+#437=VERTEX_POINT('',#438);+#438=CARTESIAN_POINT('',(1.825,3.7,0.75));+#439=LINE('',#440,#203);+#440=CARTESIAN_POINT('',(1.825,3.35,0.75));+#441=ORIENTED_EDGE('',*,*,#49,.T.);+#442=ORIENTED_EDGE('',*,*,#443,.T.);+#443=EDGE_CURVE('',#46,#444,#446,.T.);+#444=VERTEX_POINT('',#445);+#445=CARTESIAN_POINT('',(2.175,3.7,0.75));+#446=LINE('',#447,#203);+#447=CARTESIAN_POINT('',(2.175,3.35,0.75));+#448=ORIENTED_EDGE('',*,*,#449,.F.);+#449=EDGE_CURVE('',#437,#444,#450,.T.);+#450=LINE('',#438,#215);+#451=PLANE('',#452);+#452=AXIS2_PLACEMENT_3D('',#440,#13,#204);+#453=ADVANCED_FACE('',(#454),#192,.F.);+#454=FACE_BOUND('',#455,.F.);+#455=EDGE_LOOP('',(#456,#462,#463,#469));+#456=ORIENTED_EDGE('',*,*,#457,.F.);+#457=EDGE_CURVE('',#46,#458,#460,.T.);+#458=VERTEX_POINT('',#459);+#459=CARTESIAN_POINT('',(2.175,3.5,0.85));+#460=LINE('',#461,#188);+#461=CARTESIAN_POINT('',(2.175,3.5,0.630119079428));+#462=ORIENTED_EDGE('',*,*,#45,.T.);+#463=ORIENTED_EDGE('',*,*,#464,.T.);+#464=EDGE_CURVE('',#42,#465,#467,.T.);+#465=VERTEX_POINT('',#466);+#466=CARTESIAN_POINT('',(2.625,3.5,0.85));+#467=LINE('',#468,#188);+#468=CARTESIAN_POINT('',(2.625,3.5,0.630119079428));+#469=ORIENTED_EDGE('',*,*,#470,.F.);+#470=EDGE_CURVE('',#458,#465,#191,.T.);+#471=ADVANCED_FACE('',(#472),#490,.F.);+#472=FACE_BOUND('',#473,.F.);+#473=EDGE_LOOP('',(#474,#480,#481,#487));+#474=ORIENTED_EDGE('',*,*,#475,.F.);+#475=EDGE_CURVE('',#42,#476,#478,.T.);+#476=VERTEX_POINT('',#477);+#477=CARTESIAN_POINT('',(2.625,3.7,0.75));+#478=LINE('',#479,#203);+#479=CARTESIAN_POINT('',(2.625,3.35,0.75));+#480=ORIENTED_EDGE('',*,*,#41,.T.);+#481=ORIENTED_EDGE('',*,*,#482,.T.);+#482=EDGE_CURVE('',#36,#483,#485,.T.);+#483=VERTEX_POINT('',#484);+#484=CARTESIAN_POINT('',(2.975,3.7,0.75));+#485=LINE('',#486,#203);+#486=CARTESIAN_POINT('',(2.975,3.35,0.75));+#487=ORIENTED_EDGE('',*,*,#488,.F.);+#488=EDGE_CURVE('',#476,#483,#489,.T.);+#489=LINE('',#477,#215);+#490=PLANE('',#491);+#491=AXIS2_PLACEMENT_3D('',#479,#13,#204);+#492=ADVANCED_FACE('',(#493),#192,.F.);+#493=FACE_BOUND('',#494,.F.);+#494=EDGE_LOOP('',(#495,#501,#502,#507));+#495=ORIENTED_EDGE('',*,*,#496,.F.);+#496=EDGE_CURVE('',#36,#497,#499,.T.);+#497=VERTEX_POINT('',#498);+#498=CARTESIAN_POINT('',(2.975,3.5,0.85));+#499=LINE('',#500,#188);+#500=CARTESIAN_POINT('',(2.975,3.5,0.630119079428));+#501=ORIENTED_EDGE('',*,*,#35,.T.);+#502=ORIENTED_EDGE('',*,*,#503,.T.);+#503=EDGE_CURVE('',#31,#504,#506,.T.);+#504=VERTEX_POINT('',#505);+#505=CARTESIAN_POINT('',(3.325,3.5,0.85));+#506=B_SPLINE_CURVE_WITH_KNOTS('',1,(#32,#505),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#507=ORIENTED_EDGE('',*,*,#508,.F.);+#508=EDGE_CURVE('',#497,#504,#191,.T.);+#509=ADVANCED_FACE('',(#510),#521,.F.);+#510=FACE_BOUND('',#511,.F.);+#511=EDGE_LOOP('',(#152,#512,#513,#518));+#512=ORIENTED_EDGE('',*,*,#104,.T.);+#513=ORIENTED_EDGE('',*,*,#514,.F.);+#514=EDGE_CURVE('',#515,#102,#517,.T.);+#515=VERTEX_POINT('',#516);+#516=CARTESIAN_POINT('',(-3.5,3.325,0.75));+#517=LINE('',#516,#155);+#518=ORIENTED_EDGE('',*,*,#519,.F.);+#519=EDGE_CURVE('',#147,#515,#520,.T.);+#520=B_SPLINE_CURVE_WITH_KNOTS('',1,(#148,#516),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#521=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#148,#516),(#23,#39)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#522=ADVANCED_FACE('',(#523),#598,.F.);+#523=FACE_BOUND('',#524,.F.);+#524=EDGE_LOOP('',(#145,#525,#526,#532,#536,#540,#544,#548,#552,#556,#560,#564,#568,#572,#576,#580,#584,#588,#592,#595));+#525=ORIENTED_EDGE('',*,*,#519,.T.);+#526=ORIENTED_EDGE('',*,*,#527,.F.);+#527=EDGE_CURVE('',#528,#515,#530,.T.);+#528=VERTEX_POINT('',#529);+#529=CARTESIAN_POINT('',(-3.5,2.975,0.75));+#530=LINE('',#531,#150);+#531=CARTESIAN_POINT('',(-3.5,-3.325,0.75));+#532=ORIENTED_EDGE('',*,*,#533,.F.);+#533=EDGE_CURVE('',#534,#528,#530,.T.);+#534=VERTEX_POINT('',#535);+#535=CARTESIAN_POINT('',(-3.5,2.625,0.75));+#536=ORIENTED_EDGE('',*,*,#537,.F.);+#537=EDGE_CURVE('',#538,#534,#530,.T.);+#538=VERTEX_POINT('',#539);+#539=CARTESIAN_POINT('',(-3.5,2.175,0.75));+#540=ORIENTED_EDGE('',*,*,#541,.F.);+#541=EDGE_CURVE('',#542,#538,#530,.T.);+#542=VERTEX_POINT('',#543);+#543=CARTESIAN_POINT('',(-3.5,1.825,0.75));+#544=ORIENTED_EDGE('',*,*,#545,.F.);+#545=EDGE_CURVE('',#546,#542,#530,.T.);+#546=VERTEX_POINT('',#547);+#547=CARTESIAN_POINT('',(-3.5,1.375,0.75));+#548=ORIENTED_EDGE('',*,*,#549,.F.);+#549=EDGE_CURVE('',#550,#546,#530,.T.);+#550=VERTEX_POINT('',#551);+#551=CARTESIAN_POINT('',(-3.5,1.025,0.75));+#552=ORIENTED_EDGE('',*,*,#553,.F.);+#553=EDGE_CURVE('',#554,#550,#530,.T.);+#554=VERTEX_POINT('',#555);+#555=CARTESIAN_POINT('',(-3.5,0.575,0.75));+#556=ORIENTED_EDGE('',*,*,#557,.F.);+#557=EDGE_CURVE('',#558,#554,#530,.T.);+#558=VERTEX_POINT('',#559);+#559=CARTESIAN_POINT('',(-3.5,0.225,0.75));+#560=ORIENTED_EDGE('',*,*,#561,.F.);+#561=EDGE_CURVE('',#562,#558,#530,.T.);+#562=VERTEX_POINT('',#563);+#563=CARTESIAN_POINT('',(-3.5,-0.225,0.75));+#564=ORIENTED_EDGE('',*,*,#565,.F.);+#565=EDGE_CURVE('',#566,#562,#530,.T.);+#566=VERTEX_POINT('',#567);+#567=CARTESIAN_POINT('',(-3.5,-0.575,0.75));+#568=ORIENTED_EDGE('',*,*,#569,.F.);+#569=EDGE_CURVE('',#570,#566,#530,.T.);+#570=VERTEX_POINT('',#571);+#571=CARTESIAN_POINT('',(-3.5,-1.025,0.75));+#572=ORIENTED_EDGE('',*,*,#573,.F.);+#573=EDGE_CURVE('',#574,#570,#530,.T.);+#574=VERTEX_POINT('',#575);+#575=CARTESIAN_POINT('',(-3.5,-1.375,0.75));+#576=ORIENTED_EDGE('',*,*,#577,.F.);+#577=EDGE_CURVE('',#578,#574,#530,.T.);+#578=VERTEX_POINT('',#579);+#579=CARTESIAN_POINT('',(-3.5,-1.825,0.75));+#580=ORIENTED_EDGE('',*,*,#581,.F.);+#581=EDGE_CURVE('',#582,#578,#530,.T.);+#582=VERTEX_POINT('',#583);+#583=CARTESIAN_POINT('',(-3.5,-2.175,0.75));+#584=ORIENTED_EDGE('',*,*,#585,.F.);+#585=EDGE_CURVE('',#586,#582,#530,.T.);+#586=VERTEX_POINT('',#587);+#587=CARTESIAN_POINT('',(-3.5,-2.625,0.75));+#588=ORIENTED_EDGE('',*,*,#589,.F.);+#589=EDGE_CURVE('',#590,#586,#530,.T.);+#590=VERTEX_POINT('',#591);+#591=CARTESIAN_POINT('',(-3.5,-2.975,0.75));+#592=ORIENTED_EDGE('',*,*,#593,.F.);+#593=EDGE_CURVE('',#594,#590,#530,.T.);+#594=VERTEX_POINT('',#531);+#595=ORIENTED_EDGE('',*,*,#596,.F.);+#596=EDGE_CURVE('',#140,#594,#597,.T.);+#597=B_SPLINE_CURVE_WITH_KNOTS('',1,(#141,#531),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#598=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#141,#531),(#148,#516)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#599=ADVANCED_FACE('',(#600),#675,.F.);+#600=FACE_BOUND('',#601,.F.);+#601=EDGE_LOOP('',(#117,#602,#607,#612,#616,#620,#624,#628,#632,#636,#640,#644,#648,#652,#656,#660,#664,#668,#672,#674));+#602=ORIENTED_EDGE('',*,*,#603,.T.);+#603=EDGE_CURVE('',#119,#604,#606,.T.);+#604=VERTEX_POINT('',#605);+#605=CARTESIAN_POINT('',(3.5,-3.325,0.75));+#606=B_SPLINE_CURVE_WITH_KNOTS('',1,(#120,#605),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#607=ORIENTED_EDGE('',*,*,#608,.F.);+#608=EDGE_CURVE('',#609,#604,#611,.T.);+#609=VERTEX_POINT('',#610);+#610=CARTESIAN_POINT('',(3.5,-2.975,0.75));+#611=LINE('',#166,#122);+#612=ORIENTED_EDGE('',*,*,#613,.F.);+#613=EDGE_CURVE('',#614,#609,#611,.T.);+#614=VERTEX_POINT('',#615);+#615=CARTESIAN_POINT('',(3.5,-2.625,0.75));+#616=ORIENTED_EDGE('',*,*,#617,.F.);+#617=EDGE_CURVE('',#618,#614,#611,.T.);+#618=VERTEX_POINT('',#619);+#619=CARTESIAN_POINT('',(3.5,-2.175,0.75));+#620=ORIENTED_EDGE('',*,*,#621,.F.);+#621=EDGE_CURVE('',#622,#618,#611,.T.);+#622=VERTEX_POINT('',#623);+#623=CARTESIAN_POINT('',(3.5,-1.825,0.75));+#624=ORIENTED_EDGE('',*,*,#625,.F.);+#625=EDGE_CURVE('',#626,#622,#611,.T.);+#626=VERTEX_POINT('',#627);+#627=CARTESIAN_POINT('',(3.5,-1.375,0.75));+#628=ORIENTED_EDGE('',*,*,#629,.F.);+#629=EDGE_CURVE('',#630,#626,#611,.T.);+#630=VERTEX_POINT('',#631);+#631=CARTESIAN_POINT('',(3.5,-1.025,0.75));+#632=ORIENTED_EDGE('',*,*,#633,.F.);+#633=EDGE_CURVE('',#634,#630,#611,.T.);+#634=VERTEX_POINT('',#635);+#635=CARTESIAN_POINT('',(3.5,-0.575,0.75));+#636=ORIENTED_EDGE('',*,*,#637,.F.);+#637=EDGE_CURVE('',#638,#634,#611,.T.);+#638=VERTEX_POINT('',#639);+#639=CARTESIAN_POINT('',(3.5,-0.225,0.75));+#640=ORIENTED_EDGE('',*,*,#641,.F.);+#641=EDGE_CURVE('',#642,#638,#611,.T.);+#642=VERTEX_POINT('',#643);+#643=CARTESIAN_POINT('',(3.5,0.225,0.75));+#644=ORIENTED_EDGE('',*,*,#645,.F.);+#645=EDGE_CURVE('',#646,#642,#611,.T.);+#646=VERTEX_POINT('',#647);+#647=CARTESIAN_POINT('',(3.5,0.575,0.75));+#648=ORIENTED_EDGE('',*,*,#649,.F.);+#649=EDGE_CURVE('',#650,#646,#611,.T.);+#650=VERTEX_POINT('',#651);+#651=CARTESIAN_POINT('',(3.5,1.025,0.75));+#652=ORIENTED_EDGE('',*,*,#653,.F.);+#653=EDGE_CURVE('',#654,#650,#611,.T.);+#654=VERTEX_POINT('',#655);+#655=CARTESIAN_POINT('',(3.5,1.375,0.75));+#656=ORIENTED_EDGE('',*,*,#657,.F.);+#657=EDGE_CURVE('',#658,#654,#611,.T.);+#658=VERTEX_POINT('',#659);+#659=CARTESIAN_POINT('',(3.5,1.825,0.75));+#660=ORIENTED_EDGE('',*,*,#661,.F.);+#661=EDGE_CURVE('',#662,#658,#611,.T.);+#662=VERTEX_POINT('',#663);+#663=CARTESIAN_POINT('',(3.5,2.175,0.75));+#664=ORIENTED_EDGE('',*,*,#665,.F.);+#665=EDGE_CURVE('',#666,#662,#611,.T.);+#666=VERTEX_POINT('',#667);+#667=CARTESIAN_POINT('',(3.5,2.625,0.75));+#668=ORIENTED_EDGE('',*,*,#669,.F.);+#669=EDGE_CURVE('',#670,#666,#611,.T.);+#670=VERTEX_POINT('',#671);+#671=CARTESIAN_POINT('',(3.5,2.975,0.75));+#672=ORIENTED_EDGE('',*,*,#673,.F.);+#673=EDGE_CURVE('',#165,#670,#611,.T.);+#674=ORIENTED_EDGE('',*,*,#164,.F.);+#675=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#113,#166),(#120,#605)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#676=ADVANCED_FACE('',(#677),#688,.F.);+#677=FACE_BOUND('',#678,.F.);+#678=EDGE_LOOP('',(#138,#679,#680,#685));+#679=ORIENTED_EDGE('',*,*,#596,.T.);+#680=ORIENTED_EDGE('',*,*,#681,.F.);+#681=EDGE_CURVE('',#682,#594,#684,.T.);+#682=VERTEX_POINT('',#683);+#683=CARTESIAN_POINT('',(-3.325,-3.5,0.75));+#684=LINE('',#683,#143);+#685=ORIENTED_EDGE('',*,*,#686,.F.);+#686=EDGE_CURVE('',#133,#682,#687,.T.);+#687=B_SPLINE_CURVE_WITH_KNOTS('',1,(#134,#683),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#688=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#134,#683),(#141,#531)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#689=ADVANCED_FACE('',(#690),#701,.F.);+#690=FACE_BOUND('',#691,.F.);+#691=EDGE_LOOP('',(#124,#692,#697,#700));+#692=ORIENTED_EDGE('',*,*,#693,.T.);+#693=EDGE_CURVE('',#126,#694,#696,.T.);+#694=VERTEX_POINT('',#695);+#695=CARTESIAN_POINT('',(3.325,-3.5,0.75));+#696=B_SPLINE_CURVE_WITH_KNOTS('',1,(#127,#695),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#697=ORIENTED_EDGE('',*,*,#698,.F.);+#698=EDGE_CURVE('',#604,#694,#699,.T.);+#699=LINE('',#605,#129);+#700=ORIENTED_EDGE('',*,*,#603,.F.);+#701=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#120,#605),(#127,#695)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#702=ADVANCED_FACE('',(#703),#774,.F.);+#703=FACE_BOUND('',#704,.F.);+#704=EDGE_LOOP('',(#131,#705,#706,#711,#715,#719,#723,#727,#731,#735,#739,#743,#747,#751,#755,#759,#763,#767,#771,#773));+#705=ORIENTED_EDGE('',*,*,#686,.T.);+#706=ORIENTED_EDGE('',*,*,#707,.F.);+#707=EDGE_CURVE('',#708,#682,#710,.T.);+#708=VERTEX_POINT('',#709);+#709=CARTESIAN_POINT('',(-2.975,-3.5,0.75));+#710=LINE('',#695,#136);+#711=ORIENTED_EDGE('',*,*,#712,.F.);+#712=EDGE_CURVE('',#713,#708,#710,.T.);+#713=VERTEX_POINT('',#714);+#714=CARTESIAN_POINT('',(-2.625,-3.5,0.75));+#715=ORIENTED_EDGE('',*,*,#716,.F.);+#716=EDGE_CURVE('',#717,#713,#710,.T.);+#717=VERTEX_POINT('',#718);+#718=CARTESIAN_POINT('',(-2.175,-3.5,0.75));+#719=ORIENTED_EDGE('',*,*,#720,.F.);+#720=EDGE_CURVE('',#721,#717,#710,.T.);+#721=VERTEX_POINT('',#722);+#722=CARTESIAN_POINT('',(-1.825,-3.5,0.75));+#723=ORIENTED_EDGE('',*,*,#724,.F.);+#724=EDGE_CURVE('',#725,#721,#710,.T.);+#725=VERTEX_POINT('',#726);+#726=CARTESIAN_POINT('',(-1.375,-3.5,0.75));+#727=ORIENTED_EDGE('',*,*,#728,.F.);+#728=EDGE_CURVE('',#729,#725,#710,.T.);+#729=VERTEX_POINT('',#730);+#730=CARTESIAN_POINT('',(-1.025,-3.5,0.75));+#731=ORIENTED_EDGE('',*,*,#732,.F.);+#732=EDGE_CURVE('',#733,#729,#710,.T.);+#733=VERTEX_POINT('',#734);+#734=CARTESIAN_POINT('',(-0.575,-3.5,0.75));+#735=ORIENTED_EDGE('',*,*,#736,.F.);+#736=EDGE_CURVE('',#737,#733,#710,.T.);+#737=VERTEX_POINT('',#738);+#738=CARTESIAN_POINT('',(-0.225,-3.5,0.75));+#739=ORIENTED_EDGE('',*,*,#740,.F.);+#740=EDGE_CURVE('',#741,#737,#710,.T.);+#741=VERTEX_POINT('',#742);+#742=CARTESIAN_POINT('',(0.225,-3.5,0.75));+#743=ORIENTED_EDGE('',*,*,#744,.F.);+#744=EDGE_CURVE('',#745,#741,#710,.T.);+#745=VERTEX_POINT('',#746);+#746=CARTESIAN_POINT('',(0.575,-3.5,0.75));+#747=ORIENTED_EDGE('',*,*,#748,.F.);+#748=EDGE_CURVE('',#749,#745,#710,.T.);+#749=VERTEX_POINT('',#750);+#750=CARTESIAN_POINT('',(1.025,-3.5,0.75));+#751=ORIENTED_EDGE('',*,*,#752,.F.);+#752=EDGE_CURVE('',#753,#749,#710,.T.);+#753=VERTEX_POINT('',#754);+#754=CARTESIAN_POINT('',(1.375,-3.5,0.75));+#755=ORIENTED_EDGE('',*,*,#756,.F.);+#756=EDGE_CURVE('',#757,#753,#710,.T.);+#757=VERTEX_POINT('',#758);+#758=CARTESIAN_POINT('',(1.825,-3.5,0.75));+#759=ORIENTED_EDGE('',*,*,#760,.F.);+#760=EDGE_CURVE('',#761,#757,#710,.T.);+#761=VERTEX_POINT('',#762);+#762=CARTESIAN_POINT('',(2.175,-3.5,0.75));+#763=ORIENTED_EDGE('',*,*,#764,.F.);+#764=EDGE_CURVE('',#765,#761,#710,.T.);+#765=VERTEX_POINT('',#766);+#766=CARTESIAN_POINT('',(2.625,-3.5,0.75));+#767=ORIENTED_EDGE('',*,*,#768,.F.);+#768=EDGE_CURVE('',#769,#765,#710,.T.);+#769=VERTEX_POINT('',#770);+#770=CARTESIAN_POINT('',(2.975,-3.5,0.75));+#771=ORIENTED_EDGE('',*,*,#772,.F.);+#772=EDGE_CURVE('',#694,#769,#710,.T.);+#773=ORIENTED_EDGE('',*,*,#693,.F.);+#774=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#127,#695),(#134,#683)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.65),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#775=ADVANCED_FACE('',(#776),#788,.F.);+#776=FACE_BOUND('',#777,.F.);+#777=EDGE_LOOP('',(#778,#779,#784,#787));+#778=ORIENTED_EDGE('',*,*,#169,.T.);+#779=ORIENTED_EDGE('',*,*,#780,.T.);+#780=EDGE_CURVE('',#165,#781,#783,.T.);+#781=VERTEX_POINT('',#782);+#782=CARTESIAN_POINT('',(3.5,3.325,0.85));+#783=B_SPLINE_CURVE_WITH_KNOTS('',1,(#166,#782),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#784=ORIENTED_EDGE('',*,*,#785,.F.);+#785=EDGE_CURVE('',#504,#781,#786,.T.);+#786=LINE('',#505,#115);+#787=ORIENTED_EDGE('',*,*,#503,.F.);+#788=PLANE('',#789);+#789=AXIS2_PLACEMENT_3D('',#505,#130,#116);+#790=ADVANCED_FACE('',(#791),#803,.F.);+#791=FACE_BOUND('',#792,.F.);+#792=EDGE_LOOP('',(#793,#794,#795,#800));+#793=ORIENTED_EDGE('',*,*,#514,.T.);+#794=ORIENTED_EDGE('',*,*,#177,.T.);+#795=ORIENTED_EDGE('',*,*,#796,.F.);+#796=EDGE_CURVE('',#797,#178,#799,.T.);+#797=VERTEX_POINT('',#798);+#798=CARTESIAN_POINT('',(-3.5,3.325,0.85));+#799=LINE('',#798,#155);+#800=ORIENTED_EDGE('',*,*,#801,.F.);+#801=EDGE_CURVE('',#515,#797,#802,.T.);+#802=B_SPLINE_CURVE_WITH_KNOTS('',1,(#516,#798),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#803=PLANE('',#804);+#804=AXIS2_PLACEMENT_3D('',#798,#116,#156);+#805=ADVANCED_FACE('',(#806),#846,.F.);+#806=FACE_BOUND('',#807,.F.);+#807=EDGE_LOOP('',(#808,#809,#810,#818,#823,#828,#834,#842));+#808=ORIENTED_EDGE('',*,*,#796,.T.);+#809=ORIENTED_EDGE('',*,*,#190,.T.);+#810=ORIENTED_EDGE('',*,*,#811,.T.);+#811=EDGE_CURVE('',#184,#812,#814,.T.);+#812=VERTEX_POINT('',#813);+#813=CARTESIAN_POINT('',(-2.975,3.425,0.85));+#814=LINE('',#815,#816);+#815=CARTESIAN_POINT('',(-2.975,3.7,0.85));+#816=VECTOR('',#817,1.);+#817=DIRECTION('',(0.,-1.,0.));+#818=ORIENTED_EDGE('',*,*,#819,.F.);+#819=EDGE_CURVE('',#820,#812,#822,.T.);+#820=VERTEX_POINT('',#821);+#821=CARTESIAN_POINT('',(-3.2875,3.425,0.85));+#822=LINE('',#821,#27);+#823=ORIENTED_EDGE('',*,*,#824,.F.);+#824=EDGE_CURVE('',#825,#820,#827,.T.);+#825=VERTEX_POINT('',#826);+#826=CARTESIAN_POINT('',(-3.425,3.2875,0.85));+#827=LINE('',#826,#155);+#828=ORIENTED_EDGE('',*,*,#829,.F.);+#829=EDGE_CURVE('',#830,#825,#832,.T.);+#830=VERTEX_POINT('',#831);+#831=CARTESIAN_POINT('',(-3.425,2.975,0.85));+#832=LINE('',#833,#150);+#833=CARTESIAN_POINT('',(-3.425,-3.2875,0.85));+#834=ORIENTED_EDGE('',*,*,#835,.F.);+#835=EDGE_CURVE('',#836,#830,#838,.T.);+#836=VERTEX_POINT('',#837);+#837=CARTESIAN_POINT('',(-3.5,2.975,0.85));+#838=LINE('',#839,#840);+#839=CARTESIAN_POINT('',(-3.7,2.975,0.85));+#840=VECTOR('',#841,1.);+#841=DIRECTION('',(1.,-1.144237745222E-17,0.));+#842=ORIENTED_EDGE('',*,*,#843,.T.);+#843=EDGE_CURVE('',#836,#797,#844,.T.);+#844=LINE('',#845,#150);+#845=CARTESIAN_POINT('',(-3.5,-3.325,0.85));+#846=PLANE('',#847);+#847=AXIS2_PLACEMENT_3D('',#848,#849,#850);+#848=CARTESIAN_POINT('',(-5.67922660231E-16,3.4625,0.85));+#849=DIRECTION('',(2.385602542375E-32,-5.480736096329E-27,-1.));+#850=DIRECTION('',(1.,1.177642739465E-16,2.38560254231E-32));+#851=ADVANCED_FACE('',(#852),#918,.F.);+#852=FACE_BOUND('',#853,.F.);+#853=EDGE_LOOP('',(#854,#855,#856,#865,#872,#880,#885,#890,#895,#903,#910,#916));+#854=ORIENTED_EDGE('',*,*,#183,.F.);+#855=ORIENTED_EDGE('',*,*,#198,.T.);+#856=ORIENTED_EDGE('',*,*,#857,.T.);+#857=EDGE_CURVE('',#199,#858,#860,.T.);+#858=VERTEX_POINT('',#859);+#859=CARTESIAN_POINT('',(-2.975,3.798480775301,0.667364817767));+#860=CIRCLE('',#861,0.1);+#861=AXIS2_PLACEMENT_3D('',#862,#863,#864);+#862=CARTESIAN_POINT('',(-2.975,3.7,0.65));+#863=DIRECTION('',(-1.,0.,0.));+#864=DIRECTION('',(0.,4.440892098501E-15,1.));+#865=ORIENTED_EDGE('',*,*,#866,.T.);+#866=EDGE_CURVE('',#858,#867,#869,.T.);+#867=VERTEX_POINT('',#868);+#868=CARTESIAN_POINT('',(-2.975,3.882385590716,0.165270364467));+#869=LINE('',#859,#870);+#870=VECTOR('',#871,1.);+#871=DIRECTION('',(0.,0.16482406317,-0.986322983713));+#872=ORIENTED_EDGE('',*,*,#873,.T.);+#873=EDGE_CURVE('',#867,#874,#876,.T.);+#874=VERTEX_POINT('',#875);+#875=CARTESIAN_POINT('',(-2.975,4.079347141319,1.387778780781E-16));+#876=CIRCLE('',#877,0.2);+#877=AXIS2_PLACEMENT_3D('',#878,#216,#879);+#878=CARTESIAN_POINT('',(-2.975,4.079347141319,0.2));+#879=DIRECTION('',(0.,-0.984807753012,-0.173648177667));+#880=ORIENTED_EDGE('',*,*,#881,.T.);+#881=EDGE_CURVE('',#874,#882,#884,.T.);+#882=VERTEX_POINT('',#883);+#883=CARTESIAN_POINT('',(-2.975,4.5,1.387778780781E-16));+#884=LINE('',#875,#203);+#885=ORIENTED_EDGE('',*,*,#886,.T.);+#886=EDGE_CURVE('',#882,#887,#889,.T.);+#887=VERTEX_POINT('',#888);+#888=CARTESIAN_POINT('',(-2.975,4.5,0.1));+#889=LINE('',#883,#188);+#890=ORIENTED_EDGE('',*,*,#891,.T.);+#891=EDGE_CURVE('',#887,#892,#894,.T.);+#892=VERTEX_POINT('',#893);+#893=CARTESIAN_POINT('',(-2.975,4.079347141319,0.1));+#894=LINE('',#888,#816);+#895=ORIENTED_EDGE('',*,*,#896,.T.);+#896=EDGE_CURVE('',#892,#897,#899,.T.);+#897=VERTEX_POINT('',#898);+#898=CARTESIAN_POINT('',(-2.975,3.980866366018,0.182635182233));+#899=CIRCLE('',#900,1.E-01);+#900=AXIS2_PLACEMENT_3D('',#878,#901,#902);+#901=DIRECTION('',(-1.,0.,-0.));+#902=DIRECTION('',(0.,8.881784197001E-15,-1.));+#903=ORIENTED_EDGE('',*,*,#904,.T.);+#904=EDGE_CURVE('',#897,#905,#907,.T.);+#905=VERTEX_POINT('',#906);+#906=CARTESIAN_POINT('',(-2.975,3.896961550602,0.684729635533));+#907=LINE('',#898,#908);+#908=VECTOR('',#909,1.);+#909=DIRECTION('',(0.,-0.16482406317,0.986322983713));+#910=ORIENTED_EDGE('',*,*,#911,.T.);+#911=EDGE_CURVE('',#905,#912,#913,.T.);+#912=VERTEX_POINT('',#815);+#913=CIRCLE('',#914,0.2);+#914=AXIS2_PLACEMENT_3D('',#862,#14,#915);+#915=DIRECTION('',(0.,0.984807753012,0.173648177667));+#916=ORIENTED_EDGE('',*,*,#917,.T.);+#917=EDGE_CURVE('',#912,#184,#814,.T.);+#918=PLANE('',#919);+#919=AXIS2_PLACEMENT_3D('',#920,#216,#13);+#920=CARTESIAN_POINT('',(-2.975,3.914276639233,0.410238158856));+#921=ADVANCED_FACE('',(#922),#936,.F.);+#922=FACE_BOUND('',#923,.F.);+#923=EDGE_LOOP('',(#924,#925,#932,#935));+#924=ORIENTED_EDGE('',*,*,#213,.T.);+#925=ORIENTED_EDGE('',*,*,#926,.T.);+#926=EDGE_CURVE('',#208,#927,#929,.T.);+#927=VERTEX_POINT('',#928);+#928=CARTESIAN_POINT('',(-2.625,3.798480775301,0.667364817767));+#929=CIRCLE('',#930,0.1);+#930=AXIS2_PLACEMENT_3D('',#931,#863,#864);+#931=CARTESIAN_POINT('',(-2.625,3.7,0.65));+#932=ORIENTED_EDGE('',*,*,#933,.F.);+#933=EDGE_CURVE('',#858,#927,#934,.T.);+#934=LINE('',#859,#215);+#935=ORIENTED_EDGE('',*,*,#857,.F.);+#936=CYLINDRICAL_SURFACE('',#861,0.1);+#937=ADVANCED_FACE('',(#938),#987,.T.);+#938=FACE_BOUND('',#939,.T.);+#939=EDGE_LOOP('',(#222,#206,#925,#940,#945,#952,#957,#962,#967,#973,#978,#984));+#940=ORIENTED_EDGE('',*,*,#941,.T.);+#941=EDGE_CURVE('',#927,#942,#944,.T.);+#942=VERTEX_POINT('',#943);+#943=CARTESIAN_POINT('',(-2.625,3.882385590716,0.165270364467));+#944=LINE('',#928,#870);+#945=ORIENTED_EDGE('',*,*,#946,.T.);+#946=EDGE_CURVE('',#942,#947,#949,.T.);+#947=VERTEX_POINT('',#948);+#948=CARTESIAN_POINT('',(-2.625,4.079347141319,1.387778780781E-16));+#949=CIRCLE('',#950,0.2);+#950=AXIS2_PLACEMENT_3D('',#951,#216,#879);+#951=CARTESIAN_POINT('',(-2.625,4.079347141319,0.2));+#952=ORIENTED_EDGE('',*,*,#953,.T.);+#953=EDGE_CURVE('',#947,#954,#956,.T.);+#954=VERTEX_POINT('',#955);+#955=CARTESIAN_POINT('',(-2.625,4.5,1.387778780781E-16));+#956=LINE('',#948,#203);+#957=ORIENTED_EDGE('',*,*,#958,.T.);+#958=EDGE_CURVE('',#954,#959,#961,.T.);+#959=VERTEX_POINT('',#960);+#960=CARTESIAN_POINT('',(-2.625,4.5,0.1));+#961=LINE('',#955,#188);+#962=ORIENTED_EDGE('',*,*,#963,.T.);+#963=EDGE_CURVE('',#959,#964,#966,.T.);+#964=VERTEX_POINT('',#965);+#965=CARTESIAN_POINT('',(-2.625,4.079347141319,0.1));+#966=LINE('',#960,#816);+#967=ORIENTED_EDGE('',*,*,#968,.T.);+#968=EDGE_CURVE('',#964,#969,#971,.T.);+#969=VERTEX_POINT('',#970);+#970=CARTESIAN_POINT('',(-2.625,3.980866366018,0.182635182233));+#971=CIRCLE('',#972,1.E-01);+#972=AXIS2_PLACEMENT_3D('',#951,#901,#902);+#973=ORIENTED_EDGE('',*,*,#974,.T.);+#974=EDGE_CURVE('',#969,#975,#977,.T.);+#975=VERTEX_POINT('',#976);+#976=CARTESIAN_POINT('',(-2.625,3.896961550602,0.684729635533));+#977=LINE('',#970,#908);+#978=ORIENTED_EDGE('',*,*,#979,.T.);+#979=EDGE_CURVE('',#975,#980,#982,.T.);+#980=VERTEX_POINT('',#981);+#981=CARTESIAN_POINT('',(-2.625,3.7,0.85));+#982=CIRCLE('',#983,0.2);+#983=AXIS2_PLACEMENT_3D('',#931,#14,#915);+#984=ORIENTED_EDGE('',*,*,#985,.T.);+#985=EDGE_CURVE('',#980,#224,#986,.T.);+#986=LINE('',#981,#816);+#987=PLANE('',#988);+#988=AXIS2_PLACEMENT_3D('',#989,#216,#13);+#989=CARTESIAN_POINT('',(-2.625,3.914276639233,0.410238158856));+#990=ADVANCED_FACE('',(#991),#846,.F.);+#991=FACE_BOUND('',#992,.F.);+#992=EDGE_LOOP('',(#993,#997,#998,#1004));+#993=ORIENTED_EDGE('',*,*,#994,.F.);+#994=EDGE_CURVE('',#224,#995,#986,.T.);+#995=VERTEX_POINT('',#996);+#996=CARTESIAN_POINT('',(-2.625,3.425,0.85));+#997=ORIENTED_EDGE('',*,*,#236,.T.);+#998=ORIENTED_EDGE('',*,*,#999,.T.);+#999=EDGE_CURVE('',#231,#1000,#1002,.T.);+#1000=VERTEX_POINT('',#1001);+#1001=CARTESIAN_POINT('',(-2.175,3.425,0.85));+#1002=LINE('',#1003,#816);+#1003=CARTESIAN_POINT('',(-2.175,3.7,0.85));+#1004=ORIENTED_EDGE('',*,*,#1005,.F.);+#1005=EDGE_CURVE('',#995,#1000,#822,.T.);+#1006=ADVANCED_FACE('',(#1007),#1063,.F.);+#1007=FACE_BOUND('',#1008,.F.);+#1008=EDGE_LOOP('',(#1009,#1010,#1011,#1018,#1023,#1030,#1035,#1040,#1045,#1051,#1056,#1061));+#1009=ORIENTED_EDGE('',*,*,#230,.F.);+#1010=ORIENTED_EDGE('',*,*,#241,.T.);+#1011=ORIENTED_EDGE('',*,*,#1012,.T.);+#1012=EDGE_CURVE('',#242,#1013,#1015,.T.);+#1013=VERTEX_POINT('',#1014);+#1014=CARTESIAN_POINT('',(-2.175,3.798480775301,0.667364817767));+#1015=CIRCLE('',#1016,0.1);+#1016=AXIS2_PLACEMENT_3D('',#1017,#863,#864);+#1017=CARTESIAN_POINT('',(-2.175,3.7,0.65));+#1018=ORIENTED_EDGE('',*,*,#1019,.T.);+#1019=EDGE_CURVE('',#1013,#1020,#1022,.T.);+#1020=VERTEX_POINT('',#1021);+#1021=CARTESIAN_POINT('',(-2.175,3.882385590716,0.165270364467));+#1022=LINE('',#1014,#870);+#1023=ORIENTED_EDGE('',*,*,#1024,.T.);+#1024=EDGE_CURVE('',#1020,#1025,#1027,.T.);+#1025=VERTEX_POINT('',#1026);+#1026=CARTESIAN_POINT('',(-2.175,4.079347141319,1.387778780781E-16));+#1027=CIRCLE('',#1028,0.2);+#1028=AXIS2_PLACEMENT_3D('',#1029,#216,#879);+#1029=CARTESIAN_POINT('',(-2.175,4.079347141319,0.2));+#1030=ORIENTED_EDGE('',*,*,#1031,.T.);+#1031=EDGE_CURVE('',#1025,#1032,#1034,.T.);+#1032=VERTEX_POINT('',#1033);+#1033=CARTESIAN_POINT('',(-2.175,4.5,1.387778780781E-16));+#1034=LINE('',#1026,#203);+#1035=ORIENTED_EDGE('',*,*,#1036,.T.);+#1036=EDGE_CURVE('',#1032,#1037,#1039,.T.);+#1037=VERTEX_POINT('',#1038);+#1038=CARTESIAN_POINT('',(-2.175,4.5,0.1));+#1039=LINE('',#1033,#188);+#1040=ORIENTED_EDGE('',*,*,#1041,.T.);+#1041=EDGE_CURVE('',#1037,#1042,#1044,.T.);+#1042=VERTEX_POINT('',#1043);+#1043=CARTESIAN_POINT('',(-2.175,4.079347141319,0.1));+#1044=LINE('',#1038,#816);+#1045=ORIENTED_EDGE('',*,*,#1046,.T.);+#1046=EDGE_CURVE('',#1042,#1047,#1049,.T.);+#1047=VERTEX_POINT('',#1048);+#1048=CARTESIAN_POINT('',(-2.175,3.980866366018,0.182635182233));+#1049=CIRCLE('',#1050,1.E-01);+#1050=AXIS2_PLACEMENT_3D('',#1029,#901,#902);+#1051=ORIENTED_EDGE('',*,*,#1052,.T.);+#1052=EDGE_CURVE('',#1047,#1053,#1055,.T.);+#1053=VERTEX_POINT('',#1054);+#1054=CARTESIAN_POINT('',(-2.175,3.896961550602,0.684729635533));+#1055=LINE('',#1048,#908);+#1056=ORIENTED_EDGE('',*,*,#1057,.T.);+#1057=EDGE_CURVE('',#1053,#1058,#1059,.T.);+#1058=VERTEX_POINT('',#1003);+#1059=CIRCLE('',#1060,0.2);+#1060=AXIS2_PLACEMENT_3D('',#1017,#14,#915);+#1061=ORIENTED_EDGE('',*,*,#1062,.T.);+#1062=EDGE_CURVE('',#1058,#231,#1002,.T.);+#1063=PLANE('',#1064);+#1064=AXIS2_PLACEMENT_3D('',#1065,#216,#13);+#1065=CARTESIAN_POINT('',(-2.175,3.914276639233,0.410238158856));+#1066=ADVANCED_FACE('',(#1067),#1081,.F.);+#1067=FACE_BOUND('',#1068,.F.);+#1068=EDGE_LOOP('',(#1069,#1070,#1077,#1080));+#1069=ORIENTED_EDGE('',*,*,#254,.T.);+#1070=ORIENTED_EDGE('',*,*,#1071,.T.);+#1071=EDGE_CURVE('',#249,#1072,#1074,.T.);+#1072=VERTEX_POINT('',#1073);+#1073=CARTESIAN_POINT('',(-1.825,3.798480775301,0.667364817767));+#1074=CIRCLE('',#1075,0.1);+#1075=AXIS2_PLACEMENT_3D('',#1076,#863,#864);+#1076=CARTESIAN_POINT('',(-1.825,3.7,0.65));+#1077=ORIENTED_EDGE('',*,*,#1078,.F.);+#1078=EDGE_CURVE('',#1013,#1072,#1079,.T.);+#1079=LINE('',#1014,#215);+#1080=ORIENTED_EDGE('',*,*,#1012,.F.);+#1081=CYLINDRICAL_SURFACE('',#1016,0.1);+#1082=ADVANCED_FACE('',(#1083),#1132,.T.);+#1083=FACE_BOUND('',#1084,.T.);+#1084=EDGE_LOOP('',(#261,#247,#1070,#1085,#1090,#1097,#1102,#1107,#1112,#1118,#1123,#1129));+#1085=ORIENTED_EDGE('',*,*,#1086,.T.);+#1086=EDGE_CURVE('',#1072,#1087,#1089,.T.);+#1087=VERTEX_POINT('',#1088);+#1088=CARTESIAN_POINT('',(-1.825,3.882385590716,0.165270364467));+#1089=LINE('',#1073,#870);+#1090=ORIENTED_EDGE('',*,*,#1091,.T.);+#1091=EDGE_CURVE('',#1087,#1092,#1094,.T.);+#1092=VERTEX_POINT('',#1093);+#1093=CARTESIAN_POINT('',(-1.825,4.079347141319,1.387778780781E-16));+#1094=CIRCLE('',#1095,0.2);+#1095=AXIS2_PLACEMENT_3D('',#1096,#216,#879);+#1096=CARTESIAN_POINT('',(-1.825,4.079347141319,0.2));+#1097=ORIENTED_EDGE('',*,*,#1098,.T.);+#1098=EDGE_CURVE('',#1092,#1099,#1101,.T.);+#1099=VERTEX_POINT('',#1100);+#1100=CARTESIAN_POINT('',(-1.825,4.5,1.387778780781E-16));+#1101=LINE('',#1093,#203);+#1102=ORIENTED_EDGE('',*,*,#1103,.T.);+#1103=EDGE_CURVE('',#1099,#1104,#1106,.T.);+#1104=VERTEX_POINT('',#1105);+#1105=CARTESIAN_POINT('',(-1.825,4.5,0.1));+#1106=LINE('',#1100,#188);+#1107=ORIENTED_EDGE('',*,*,#1108,.T.);+#1108=EDGE_CURVE('',#1104,#1109,#1111,.T.);+#1109=VERTEX_POINT('',#1110);+#1110=CARTESIAN_POINT('',(-1.825,4.079347141319,0.1));+#1111=LINE('',#1105,#816);+#1112=ORIENTED_EDGE('',*,*,#1113,.T.);+#1113=EDGE_CURVE('',#1109,#1114,#1116,.T.);+#1114=VERTEX_POINT('',#1115);+#1115=CARTESIAN_POINT('',(-1.825,3.980866366018,0.182635182233));+#1116=CIRCLE('',#1117,1.E-01);+#1117=AXIS2_PLACEMENT_3D('',#1096,#901,#902);+#1118=ORIENTED_EDGE('',*,*,#1119,.T.);+#1119=EDGE_CURVE('',#1114,#1120,#1122,.T.);+#1120=VERTEX_POINT('',#1121);+#1121=CARTESIAN_POINT('',(-1.825,3.896961550602,0.684729635533));+#1122=LINE('',#1115,#908);+#1123=ORIENTED_EDGE('',*,*,#1124,.T.);+#1124=EDGE_CURVE('',#1120,#1125,#1127,.T.);+#1125=VERTEX_POINT('',#1126);+#1126=CARTESIAN_POINT('',(-1.825,3.7,0.85));+#1127=CIRCLE('',#1128,0.2);+#1128=AXIS2_PLACEMENT_3D('',#1076,#14,#915);+#1129=ORIENTED_EDGE('',*,*,#1130,.T.);+#1130=EDGE_CURVE('',#1125,#263,#1131,.T.);+#1131=LINE('',#1126,#816);+#1132=PLANE('',#1133);+#1133=AXIS2_PLACEMENT_3D('',#1134,#216,#13);+#1134=CARTESIAN_POINT('',(-1.825,3.914276639233,0.410238158856));+#1135=ADVANCED_FACE('',(#1136),#846,.F.);+#1136=FACE_BOUND('',#1137,.F.);+#1137=EDGE_LOOP('',(#1138,#1142,#1143,#1149));+#1138=ORIENTED_EDGE('',*,*,#1139,.F.);+#1139=EDGE_CURVE('',#263,#1140,#1131,.T.);+#1140=VERTEX_POINT('',#1141);+#1141=CARTESIAN_POINT('',(-1.825,3.425,0.85));+#1142=ORIENTED_EDGE('',*,*,#275,.T.);+#1143=ORIENTED_EDGE('',*,*,#1144,.T.);+#1144=EDGE_CURVE('',#270,#1145,#1147,.T.);+#1145=VERTEX_POINT('',#1146);+#1146=CARTESIAN_POINT('',(-1.375,3.425,0.85));+#1147=LINE('',#1148,#816);+#1148=CARTESIAN_POINT('',(-1.375,3.7,0.85));+#1149=ORIENTED_EDGE('',*,*,#1150,.F.);+#1150=EDGE_CURVE('',#1140,#1145,#822,.T.);+#1151=ADVANCED_FACE('',(#1152),#1208,.F.);+#1152=FACE_BOUND('',#1153,.F.);+#1153=EDGE_LOOP('',(#1154,#1155,#1156,#1163,#1168,#1175,#1180,#1185,#1190,#1196,#1201,#1206));+#1154=ORIENTED_EDGE('',*,*,#269,.F.);+#1155=ORIENTED_EDGE('',*,*,#280,.T.);+#1156=ORIENTED_EDGE('',*,*,#1157,.T.);+#1157=EDGE_CURVE('',#281,#1158,#1160,.T.);+#1158=VERTEX_POINT('',#1159);+#1159=CARTESIAN_POINT('',(-1.375,3.798480775301,0.667364817767));+#1160=CIRCLE('',#1161,0.1);+#1161=AXIS2_PLACEMENT_3D('',#1162,#863,#864);+#1162=CARTESIAN_POINT('',(-1.375,3.7,0.65));+#1163=ORIENTED_EDGE('',*,*,#1164,.T.);+#1164=EDGE_CURVE('',#1158,#1165,#1167,.T.);+#1165=VERTEX_POINT('',#1166);+#1166=CARTESIAN_POINT('',(-1.375,3.882385590716,0.165270364467));+#1167=LINE('',#1159,#870);+#1168=ORIENTED_EDGE('',*,*,#1169,.T.);+#1169=EDGE_CURVE('',#1165,#1170,#1172,.T.);+#1170=VERTEX_POINT('',#1171);+#1171=CARTESIAN_POINT('',(-1.375,4.079347141319,1.387778780781E-16));+#1172=CIRCLE('',#1173,0.2);+#1173=AXIS2_PLACEMENT_3D('',#1174,#216,#879);+#1174=CARTESIAN_POINT('',(-1.375,4.079347141319,0.2));+#1175=ORIENTED_EDGE('',*,*,#1176,.T.);+#1176=EDGE_CURVE('',#1170,#1177,#1179,.T.);+#1177=VERTEX_POINT('',#1178);+#1178=CARTESIAN_POINT('',(-1.375,4.5,1.387778780781E-16));+#1179=LINE('',#1171,#203);+#1180=ORIENTED_EDGE('',*,*,#1181,.T.);+#1181=EDGE_CURVE('',#1177,#1182,#1184,.T.);+#1182=VERTEX_POINT('',#1183);+#1183=CARTESIAN_POINT('',(-1.375,4.5,0.1));+#1184=LINE('',#1178,#188);+#1185=ORIENTED_EDGE('',*,*,#1186,.T.);+#1186=EDGE_CURVE('',#1182,#1187,#1189,.T.);+#1187=VERTEX_POINT('',#1188);+#1188=CARTESIAN_POINT('',(-1.375,4.079347141319,0.1));+#1189=LINE('',#1183,#816);+#1190=ORIENTED_EDGE('',*,*,#1191,.T.);+#1191=EDGE_CURVE('',#1187,#1192,#1194,.T.);+#1192=VERTEX_POINT('',#1193);+#1193=CARTESIAN_POINT('',(-1.375,3.980866366018,0.182635182233));+#1194=CIRCLE('',#1195,1.E-01);+#1195=AXIS2_PLACEMENT_3D('',#1174,#901,#902);+#1196=ORIENTED_EDGE('',*,*,#1197,.T.);+#1197=EDGE_CURVE('',#1192,#1198,#1200,.T.);+#1198=VERTEX_POINT('',#1199);+#1199=CARTESIAN_POINT('',(-1.375,3.896961550602,0.684729635533));+#1200=LINE('',#1193,#908);+#1201=ORIENTED_EDGE('',*,*,#1202,.T.);+#1202=EDGE_CURVE('',#1198,#1203,#1204,.T.);+#1203=VERTEX_POINT('',#1148);+#1204=CIRCLE('',#1205,0.2);+#1205=AXIS2_PLACEMENT_3D('',#1162,#14,#915);+#1206=ORIENTED_EDGE('',*,*,#1207,.T.);+#1207=EDGE_CURVE('',#1203,#270,#1147,.T.);+#1208=PLANE('',#1209);+#1209=AXIS2_PLACEMENT_3D('',#1210,#216,#13);+#1210=CARTESIAN_POINT('',(-1.375,3.914276639233,0.410238158856));+#1211=ADVANCED_FACE('',(#1212),#1226,.F.);+#1212=FACE_BOUND('',#1213,.F.);+#1213=EDGE_LOOP('',(#1214,#1215,#1222,#1225));+#1214=ORIENTED_EDGE('',*,*,#293,.T.);+#1215=ORIENTED_EDGE('',*,*,#1216,.T.);+#1216=EDGE_CURVE('',#288,#1217,#1219,.T.);+#1217=VERTEX_POINT('',#1218);+#1218=CARTESIAN_POINT('',(-1.025,3.798480775301,0.667364817767));+#1219=CIRCLE('',#1220,0.1);+#1220=AXIS2_PLACEMENT_3D('',#1221,#863,#864);+#1221=CARTESIAN_POINT('',(-1.025,3.7,0.65));+#1222=ORIENTED_EDGE('',*,*,#1223,.F.);+#1223=EDGE_CURVE('',#1158,#1217,#1224,.T.);+#1224=LINE('',#1159,#215);+#1225=ORIENTED_EDGE('',*,*,#1157,.F.);+#1226=CYLINDRICAL_SURFACE('',#1161,0.1);+#1227=ADVANCED_FACE('',(#1228),#1277,.T.);+#1228=FACE_BOUND('',#1229,.T.);+#1229=EDGE_LOOP('',(#300,#286,#1215,#1230,#1235,#1242,#1247,#1252,#1257,#1263,#1268,#1274));+#1230=ORIENTED_EDGE('',*,*,#1231,.T.);+#1231=EDGE_CURVE('',#1217,#1232,#1234,.T.);+#1232=VERTEX_POINT('',#1233);+#1233=CARTESIAN_POINT('',(-1.025,3.882385590716,0.165270364467));+#1234=LINE('',#1218,#870);+#1235=ORIENTED_EDGE('',*,*,#1236,.T.);+#1236=EDGE_CURVE('',#1232,#1237,#1239,.T.);+#1237=VERTEX_POINT('',#1238);+#1238=CARTESIAN_POINT('',(-1.025,4.079347141319,1.387778780781E-16));+#1239=CIRCLE('',#1240,0.2);+#1240=AXIS2_PLACEMENT_3D('',#1241,#216,#879);+#1241=CARTESIAN_POINT('',(-1.025,4.079347141319,0.2));+#1242=ORIENTED_EDGE('',*,*,#1243,.T.);+#1243=EDGE_CURVE('',#1237,#1244,#1246,.T.);+#1244=VERTEX_POINT('',#1245);+#1245=CARTESIAN_POINT('',(-1.025,4.5,1.387778780781E-16));+#1246=LINE('',#1238,#203);+#1247=ORIENTED_EDGE('',*,*,#1248,.T.);+#1248=EDGE_CURVE('',#1244,#1249,#1251,.T.);+#1249=VERTEX_POINT('',#1250);+#1250=CARTESIAN_POINT('',(-1.025,4.5,0.1));+#1251=LINE('',#1245,#188);+#1252=ORIENTED_EDGE('',*,*,#1253,.T.);+#1253=EDGE_CURVE('',#1249,#1254,#1256,.T.);+#1254=VERTEX_POINT('',#1255);+#1255=CARTESIAN_POINT('',(-1.025,4.079347141319,0.1));+#1256=LINE('',#1250,#816);+#1257=ORIENTED_EDGE('',*,*,#1258,.T.);+#1258=EDGE_CURVE('',#1254,#1259,#1261,.T.);+#1259=VERTEX_POINT('',#1260);+#1260=CARTESIAN_POINT('',(-1.025,3.980866366018,0.182635182233));+#1261=CIRCLE('',#1262,1.E-01);+#1262=AXIS2_PLACEMENT_3D('',#1241,#901,#902);+#1263=ORIENTED_EDGE('',*,*,#1264,.T.);+#1264=EDGE_CURVE('',#1259,#1265,#1267,.T.);+#1265=VERTEX_POINT('',#1266);+#1266=CARTESIAN_POINT('',(-1.025,3.896961550602,0.684729635533));+#1267=LINE('',#1260,#908);+#1268=ORIENTED_EDGE('',*,*,#1269,.T.);+#1269=EDGE_CURVE('',#1265,#1270,#1272,.T.);+#1270=VERTEX_POINT('',#1271);+#1271=CARTESIAN_POINT('',(-1.025,3.7,0.85));+#1272=CIRCLE('',#1273,0.2);+#1273=AXIS2_PLACEMENT_3D('',#1221,#14,#915);+#1274=ORIENTED_EDGE('',*,*,#1275,.T.);+#1275=EDGE_CURVE('',#1270,#302,#1276,.T.);+#1276=LINE('',#1271,#816);+#1277=PLANE('',#1278);+#1278=AXIS2_PLACEMENT_3D('',#1279,#216,#13);+#1279=CARTESIAN_POINT('',(-1.025,3.914276639233,0.410238158856));+#1280=ADVANCED_FACE('',(#1281),#846,.F.);+#1281=FACE_BOUND('',#1282,.F.);+#1282=EDGE_LOOP('',(#1283,#1287,#1288,#1294));+#1283=ORIENTED_EDGE('',*,*,#1284,.F.);+#1284=EDGE_CURVE('',#302,#1285,#1276,.T.);+#1285=VERTEX_POINT('',#1286);+#1286=CARTESIAN_POINT('',(-1.025,3.425,0.85));+#1287=ORIENTED_EDGE('',*,*,#314,.T.);+#1288=ORIENTED_EDGE('',*,*,#1289,.T.);+#1289=EDGE_CURVE('',#309,#1290,#1292,.T.);+#1290=VERTEX_POINT('',#1291);+#1291=CARTESIAN_POINT('',(-0.575,3.425,0.85));+#1292=LINE('',#1293,#816);+#1293=CARTESIAN_POINT('',(-0.575,3.7,0.85));+#1294=ORIENTED_EDGE('',*,*,#1295,.F.);+#1295=EDGE_CURVE('',#1285,#1290,#822,.T.);+#1296=ADVANCED_FACE('',(#1297),#1353,.F.);+#1297=FACE_BOUND('',#1298,.F.);+#1298=EDGE_LOOP('',(#1299,#1300,#1301,#1308,#1313,#1320,#1325,#1330,#1335,#1341,#1346,#1351));+#1299=ORIENTED_EDGE('',*,*,#308,.F.);+#1300=ORIENTED_EDGE('',*,*,#319,.T.);+#1301=ORIENTED_EDGE('',*,*,#1302,.T.);+#1302=EDGE_CURVE('',#320,#1303,#1305,.T.);+#1303=VERTEX_POINT('',#1304);+#1304=CARTESIAN_POINT('',(-0.575,3.798480775301,0.667364817767));+#1305=CIRCLE('',#1306,0.1);+#1306=AXIS2_PLACEMENT_3D('',#1307,#863,#864);+#1307=CARTESIAN_POINT('',(-0.575,3.7,0.65));+#1308=ORIENTED_EDGE('',*,*,#1309,.T.);+#1309=EDGE_CURVE('',#1303,#1310,#1312,.T.);+#1310=VERTEX_POINT('',#1311);+#1311=CARTESIAN_POINT('',(-0.575,3.882385590716,0.165270364467));+#1312=LINE('',#1304,#870);+#1313=ORIENTED_EDGE('',*,*,#1314,.T.);+#1314=EDGE_CURVE('',#1310,#1315,#1317,.T.);+#1315=VERTEX_POINT('',#1316);+#1316=CARTESIAN_POINT('',(-0.575,4.079347141319,1.387778780781E-16));+#1317=CIRCLE('',#1318,0.2);+#1318=AXIS2_PLACEMENT_3D('',#1319,#216,#879);+#1319=CARTESIAN_POINT('',(-0.575,4.079347141319,0.2));+#1320=ORIENTED_EDGE('',*,*,#1321,.T.);+#1321=EDGE_CURVE('',#1315,#1322,#1324,.T.);+#1322=VERTEX_POINT('',#1323);+#1323=CARTESIAN_POINT('',(-0.575,4.5,1.387778780781E-16));+#1324=LINE('',#1316,#203);+#1325=ORIENTED_EDGE('',*,*,#1326,.T.);+#1326=EDGE_CURVE('',#1322,#1327,#1329,.T.);+#1327=VERTEX_POINT('',#1328);+#1328=CARTESIAN_POINT('',(-0.575,4.5,0.1));+#1329=LINE('',#1323,#188);+#1330=ORIENTED_EDGE('',*,*,#1331,.T.);+#1331=EDGE_CURVE('',#1327,#1332,#1334,.T.);+#1332=VERTEX_POINT('',#1333);+#1333=CARTESIAN_POINT('',(-0.575,4.079347141319,0.1));+#1334=LINE('',#1328,#816);+#1335=ORIENTED_EDGE('',*,*,#1336,.T.);+#1336=EDGE_CURVE('',#1332,#1337,#1339,.T.);+#1337=VERTEX_POINT('',#1338);+#1338=CARTESIAN_POINT('',(-0.575,3.980866366018,0.182635182233));+#1339=CIRCLE('',#1340,1.E-01);+#1340=AXIS2_PLACEMENT_3D('',#1319,#901,#902);+#1341=ORIENTED_EDGE('',*,*,#1342,.T.);+#1342=EDGE_CURVE('',#1337,#1343,#1345,.T.);+#1343=VERTEX_POINT('',#1344);+#1344=CARTESIAN_POINT('',(-0.575,3.896961550602,0.684729635533));+#1345=LINE('',#1338,#908);+#1346=ORIENTED_EDGE('',*,*,#1347,.T.);+#1347=EDGE_CURVE('',#1343,#1348,#1349,.T.);+#1348=VERTEX_POINT('',#1293);+#1349=CIRCLE('',#1350,0.2);+#1350=AXIS2_PLACEMENT_3D('',#1307,#14,#915);+#1351=ORIENTED_EDGE('',*,*,#1352,.T.);+#1352=EDGE_CURVE('',#1348,#309,#1292,.T.);+#1353=PLANE('',#1354);+#1354=AXIS2_PLACEMENT_3D('',#1355,#216,#13);+#1355=CARTESIAN_POINT('',(-0.575,3.914276639233,0.410238158856));+#1356=ADVANCED_FACE('',(#1357),#1371,.F.);+#1357=FACE_BOUND('',#1358,.F.);+#1358=EDGE_LOOP('',(#1359,#1360,#1367,#1370));+#1359=ORIENTED_EDGE('',*,*,#332,.T.);+#1360=ORIENTED_EDGE('',*,*,#1361,.T.);+#1361=EDGE_CURVE('',#327,#1362,#1364,.T.);+#1362=VERTEX_POINT('',#1363);+#1363=CARTESIAN_POINT('',(-0.225,3.798480775301,0.667364817767));+#1364=CIRCLE('',#1365,0.1);+#1365=AXIS2_PLACEMENT_3D('',#1366,#863,#864);+#1366=CARTESIAN_POINT('',(-0.225,3.7,0.65));+#1367=ORIENTED_EDGE('',*,*,#1368,.F.);+#1368=EDGE_CURVE('',#1303,#1362,#1369,.T.);+#1369=LINE('',#1304,#215);+#1370=ORIENTED_EDGE('',*,*,#1302,.F.);+#1371=CYLINDRICAL_SURFACE('',#1306,0.1);+#1372=ADVANCED_FACE('',(#1373),#1422,.T.);+#1373=FACE_BOUND('',#1374,.T.);+#1374=EDGE_LOOP('',(#339,#325,#1360,#1375,#1380,#1387,#1392,#1397,#1402,#1408,#1413,#1419));+#1375=ORIENTED_EDGE('',*,*,#1376,.T.);+#1376=EDGE_CURVE('',#1362,#1377,#1379,.T.);+#1377=VERTEX_POINT('',#1378);+#1378=CARTESIAN_POINT('',(-0.225,3.882385590716,0.165270364467));+#1379=LINE('',#1363,#870);+#1380=ORIENTED_EDGE('',*,*,#1381,.T.);+#1381=EDGE_CURVE('',#1377,#1382,#1384,.T.);+#1382=VERTEX_POINT('',#1383);+#1383=CARTESIAN_POINT('',(-0.225,4.079347141319,1.387778780781E-16));+#1384=CIRCLE('',#1385,0.2);+#1385=AXIS2_PLACEMENT_3D('',#1386,#216,#879);+#1386=CARTESIAN_POINT('',(-0.225,4.079347141319,0.2));+#1387=ORIENTED_EDGE('',*,*,#1388,.T.);+#1388=EDGE_CURVE('',#1382,#1389,#1391,.T.);+#1389=VERTEX_POINT('',#1390);+#1390=CARTESIAN_POINT('',(-0.225,4.5,1.387778780781E-16));+#1391=LINE('',#1383,#203);+#1392=ORIENTED_EDGE('',*,*,#1393,.T.);+#1393=EDGE_CURVE('',#1389,#1394,#1396,.T.);+#1394=VERTEX_POINT('',#1395);+#1395=CARTESIAN_POINT('',(-0.225,4.5,0.1));+#1396=LINE('',#1390,#188);+#1397=ORIENTED_EDGE('',*,*,#1398,.T.);+#1398=EDGE_CURVE('',#1394,#1399,#1401,.T.);+#1399=VERTEX_POINT('',#1400);+#1400=CARTESIAN_POINT('',(-0.225,4.079347141319,0.1));+#1401=LINE('',#1395,#816);+#1402=ORIENTED_EDGE('',*,*,#1403,.T.);+#1403=EDGE_CURVE('',#1399,#1404,#1406,.T.);+#1404=VERTEX_POINT('',#1405);+#1405=CARTESIAN_POINT('',(-0.225,3.980866366018,0.182635182233));+#1406=CIRCLE('',#1407,1.E-01);+#1407=AXIS2_PLACEMENT_3D('',#1386,#901,#902);+#1408=ORIENTED_EDGE('',*,*,#1409,.T.);+#1409=EDGE_CURVE('',#1404,#1410,#1412,.T.);+#1410=VERTEX_POINT('',#1411);+#1411=CARTESIAN_POINT('',(-0.225,3.896961550602,0.684729635533));+#1412=LINE('',#1405,#908);+#1413=ORIENTED_EDGE('',*,*,#1414,.T.);+#1414=EDGE_CURVE('',#1410,#1415,#1417,.T.);+#1415=VERTEX_POINT('',#1416);+#1416=CARTESIAN_POINT('',(-0.225,3.7,0.85));+#1417=CIRCLE('',#1418,0.2);+#1418=AXIS2_PLACEMENT_3D('',#1366,#14,#915);+#1419=ORIENTED_EDGE('',*,*,#1420,.T.);+#1420=EDGE_CURVE('',#1415,#341,#1421,.T.);+#1421=LINE('',#1416,#816);+#1422=PLANE('',#1423);+#1423=AXIS2_PLACEMENT_3D('',#1424,#216,#13);+#1424=CARTESIAN_POINT('',(-0.225,3.914276639233,0.410238158856));+#1425=ADVANCED_FACE('',(#1426),#846,.F.);+#1426=FACE_BOUND('',#1427,.F.);+#1427=EDGE_LOOP('',(#1428,#1432,#1433,#1439));+#1428=ORIENTED_EDGE('',*,*,#1429,.F.);+#1429=EDGE_CURVE('',#341,#1430,#1421,.T.);+#1430=VERTEX_POINT('',#1431);+#1431=CARTESIAN_POINT('',(-0.225,3.425,0.85));+#1432=ORIENTED_EDGE('',*,*,#353,.T.);+#1433=ORIENTED_EDGE('',*,*,#1434,.T.);+#1434=EDGE_CURVE('',#348,#1435,#1437,.T.);+#1435=VERTEX_POINT('',#1436);+#1436=CARTESIAN_POINT('',(0.225,3.425,0.85));+#1437=LINE('',#1438,#816);+#1438=CARTESIAN_POINT('',(0.225,3.7,0.85));+#1439=ORIENTED_EDGE('',*,*,#1440,.F.);+#1440=EDGE_CURVE('',#1430,#1435,#822,.T.);+#1441=ADVANCED_FACE('',(#1442),#1498,.F.);+#1442=FACE_BOUND('',#1443,.F.);+#1443=EDGE_LOOP('',(#1444,#1445,#1446,#1453,#1458,#1465,#1470,#1475,#1480,#1486,#1491,#1496));+#1444=ORIENTED_EDGE('',*,*,#347,.F.);+#1445=ORIENTED_EDGE('',*,*,#358,.T.);+#1446=ORIENTED_EDGE('',*,*,#1447,.T.);+#1447=EDGE_CURVE('',#359,#1448,#1450,.T.);+#1448=VERTEX_POINT('',#1449);+#1449=CARTESIAN_POINT('',(0.225,3.798480775301,0.667364817767));+#1450=CIRCLE('',#1451,0.1);+#1451=AXIS2_PLACEMENT_3D('',#1452,#863,#864);+#1452=CARTESIAN_POINT('',(0.225,3.7,0.65));+#1453=ORIENTED_EDGE('',*,*,#1454,.T.);+#1454=EDGE_CURVE('',#1448,#1455,#1457,.T.);+#1455=VERTEX_POINT('',#1456);+#1456=CARTESIAN_POINT('',(0.225,3.882385590716,0.165270364467));+#1457=LINE('',#1449,#870);+#1458=ORIENTED_EDGE('',*,*,#1459,.T.);+#1459=EDGE_CURVE('',#1455,#1460,#1462,.T.);+#1460=VERTEX_POINT('',#1461);+#1461=CARTESIAN_POINT('',(0.225,4.079347141319,1.387778780781E-16));+#1462=CIRCLE('',#1463,0.2);+#1463=AXIS2_PLACEMENT_3D('',#1464,#216,#879);+#1464=CARTESIAN_POINT('',(0.225,4.079347141319,0.2));+#1465=ORIENTED_EDGE('',*,*,#1466,.T.);+#1466=EDGE_CURVE('',#1460,#1467,#1469,.T.);+#1467=VERTEX_POINT('',#1468);+#1468=CARTESIAN_POINT('',(0.225,4.5,1.387778780781E-16));+#1469=LINE('',#1461,#203);+#1470=ORIENTED_EDGE('',*,*,#1471,.T.);+#1471=EDGE_CURVE('',#1467,#1472,#1474,.T.);+#1472=VERTEX_POINT('',#1473);+#1473=CARTESIAN_POINT('',(0.225,4.5,0.1));+#1474=LINE('',#1468,#188);+#1475=ORIENTED_EDGE('',*,*,#1476,.T.);+#1476=EDGE_CURVE('',#1472,#1477,#1479,.T.);+#1477=VERTEX_POINT('',#1478);+#1478=CARTESIAN_POINT('',(0.225,4.079347141319,0.1));+#1479=LINE('',#1473,#816);+#1480=ORIENTED_EDGE('',*,*,#1481,.T.);+#1481=EDGE_CURVE('',#1477,#1482,#1484,.T.);+#1482=VERTEX_POINT('',#1483);+#1483=CARTESIAN_POINT('',(0.225,3.980866366018,0.182635182233));+#1484=CIRCLE('',#1485,1.E-01);+#1485=AXIS2_PLACEMENT_3D('',#1464,#901,#902);+#1486=ORIENTED_EDGE('',*,*,#1487,.T.);+#1487=EDGE_CURVE('',#1482,#1488,#1490,.T.);+#1488=VERTEX_POINT('',#1489);+#1489=CARTESIAN_POINT('',(0.225,3.896961550602,0.684729635533));+#1490=LINE('',#1483,#908);+#1491=ORIENTED_EDGE('',*,*,#1492,.T.);+#1492=EDGE_CURVE('',#1488,#1493,#1494,.T.);+#1493=VERTEX_POINT('',#1438);+#1494=CIRCLE('',#1495,0.2);+#1495=AXIS2_PLACEMENT_3D('',#1452,#14,#915);+#1496=ORIENTED_EDGE('',*,*,#1497,.T.);+#1497=EDGE_CURVE('',#1493,#348,#1437,.T.);+#1498=PLANE('',#1499);+#1499=AXIS2_PLACEMENT_3D('',#1500,#216,#13);+#1500=CARTESIAN_POINT('',(0.225,3.914276639233,0.410238158856));+#1501=ADVANCED_FACE('',(#1502),#1516,.F.);+#1502=FACE_BOUND('',#1503,.F.);+#1503=EDGE_LOOP('',(#1504,#1505,#1512,#1515));+#1504=ORIENTED_EDGE('',*,*,#371,.T.);+#1505=ORIENTED_EDGE('',*,*,#1506,.T.);+#1506=EDGE_CURVE('',#366,#1507,#1509,.T.);+#1507=VERTEX_POINT('',#1508);+#1508=CARTESIAN_POINT('',(0.575,3.798480775301,0.667364817767));+#1509=CIRCLE('',#1510,0.1);+#1510=AXIS2_PLACEMENT_3D('',#1511,#863,#864);+#1511=CARTESIAN_POINT('',(0.575,3.7,0.65));+#1512=ORIENTED_EDGE('',*,*,#1513,.F.);+#1513=EDGE_CURVE('',#1448,#1507,#1514,.T.);+#1514=LINE('',#1449,#215);+#1515=ORIENTED_EDGE('',*,*,#1447,.F.);+#1516=CYLINDRICAL_SURFACE('',#1451,0.1);+#1517=ADVANCED_FACE('',(#1518),#1567,.T.);+#1518=FACE_BOUND('',#1519,.T.);+#1519=EDGE_LOOP('',(#378,#364,#1505,#1520,#1525,#1532,#1537,#1542,#1547,#1553,#1558,#1564));+#1520=ORIENTED_EDGE('',*,*,#1521,.T.);+#1521=EDGE_CURVE('',#1507,#1522,#1524,.T.);+#1522=VERTEX_POINT('',#1523);+#1523=CARTESIAN_POINT('',(0.575,3.882385590716,0.165270364467));+#1524=LINE('',#1508,#870);+#1525=ORIENTED_EDGE('',*,*,#1526,.T.);+#1526=EDGE_CURVE('',#1522,#1527,#1529,.T.);+#1527=VERTEX_POINT('',#1528);+#1528=CARTESIAN_POINT('',(0.575,4.079347141319,1.387778780781E-16));+#1529=CIRCLE('',#1530,0.2);+#1530=AXIS2_PLACEMENT_3D('',#1531,#216,#879);+#1531=CARTESIAN_POINT('',(0.575,4.079347141319,0.2));+#1532=ORIENTED_EDGE('',*,*,#1533,.T.);+#1533=EDGE_CURVE('',#1527,#1534,#1536,.T.);+#1534=VERTEX_POINT('',#1535);+#1535=CARTESIAN_POINT('',(0.575,4.5,1.387778780781E-16));+#1536=LINE('',#1528,#203);+#1537=ORIENTED_EDGE('',*,*,#1538,.T.);+#1538=EDGE_CURVE('',#1534,#1539,#1541,.T.);+#1539=VERTEX_POINT('',#1540);+#1540=CARTESIAN_POINT('',(0.575,4.5,0.1));+#1541=LINE('',#1535,#188);+#1542=ORIENTED_EDGE('',*,*,#1543,.T.);+#1543=EDGE_CURVE('',#1539,#1544,#1546,.T.);+#1544=VERTEX_POINT('',#1545);+#1545=CARTESIAN_POINT('',(0.575,4.079347141319,0.1));+#1546=LINE('',#1540,#816);+#1547=ORIENTED_EDGE('',*,*,#1548,.T.);+#1548=EDGE_CURVE('',#1544,#1549,#1551,.T.);+#1549=VERTEX_POINT('',#1550);+#1550=CARTESIAN_POINT('',(0.575,3.980866366018,0.182635182233));+#1551=CIRCLE('',#1552,1.E-01);+#1552=AXIS2_PLACEMENT_3D('',#1531,#901,#902);+#1553=ORIENTED_EDGE('',*,*,#1554,.T.);+#1554=EDGE_CURVE('',#1549,#1555,#1557,.T.);+#1555=VERTEX_POINT('',#1556);+#1556=CARTESIAN_POINT('',(0.575,3.896961550602,0.684729635533));+#1557=LINE('',#1550,#908);+#1558=ORIENTED_EDGE('',*,*,#1559,.T.);+#1559=EDGE_CURVE('',#1555,#1560,#1562,.T.);+#1560=VERTEX_POINT('',#1561);+#1561=CARTESIAN_POINT('',(0.575,3.7,0.85));+#1562=CIRCLE('',#1563,0.2);+#1563=AXIS2_PLACEMENT_3D('',#1511,#14,#915);+#1564=ORIENTED_EDGE('',*,*,#1565,.T.);+#1565=EDGE_CURVE('',#1560,#380,#1566,.T.);+#1566=LINE('',#1561,#816);+#1567=PLANE('',#1568);+#1568=AXIS2_PLACEMENT_3D('',#1569,#216,#13);+#1569=CARTESIAN_POINT('',(0.575,3.914276639233,0.410238158856));+#1570=ADVANCED_FACE('',(#1571),#846,.F.);+#1571=FACE_BOUND('',#1572,.F.);+#1572=EDGE_LOOP('',(#1573,#1577,#1578,#1584));+#1573=ORIENTED_EDGE('',*,*,#1574,.F.);+#1574=EDGE_CURVE('',#380,#1575,#1566,.T.);+#1575=VERTEX_POINT('',#1576);+#1576=CARTESIAN_POINT('',(0.575,3.425,0.85));+#1577=ORIENTED_EDGE('',*,*,#392,.T.);+#1578=ORIENTED_EDGE('',*,*,#1579,.T.);+#1579=EDGE_CURVE('',#387,#1580,#1582,.T.);+#1580=VERTEX_POINT('',#1581);+#1581=CARTESIAN_POINT('',(1.025,3.425,0.85));+#1582=LINE('',#1583,#816);+#1583=CARTESIAN_POINT('',(1.025,3.7,0.85));+#1584=ORIENTED_EDGE('',*,*,#1585,.F.);+#1585=EDGE_CURVE('',#1575,#1580,#822,.T.);+#1586=ADVANCED_FACE('',(#1587),#1643,.F.);+#1587=FACE_BOUND('',#1588,.F.);+#1588=EDGE_LOOP('',(#1589,#1590,#1591,#1598,#1603,#1610,#1615,#1620,#1625,#1631,#1636,#1641));+#1589=ORIENTED_EDGE('',*,*,#386,.F.);+#1590=ORIENTED_EDGE('',*,*,#397,.T.);+#1591=ORIENTED_EDGE('',*,*,#1592,.T.);+#1592=EDGE_CURVE('',#398,#1593,#1595,.T.);+#1593=VERTEX_POINT('',#1594);+#1594=CARTESIAN_POINT('',(1.025,3.798480775301,0.667364817767));+#1595=CIRCLE('',#1596,0.1);+#1596=AXIS2_PLACEMENT_3D('',#1597,#863,#864);+#1597=CARTESIAN_POINT('',(1.025,3.7,0.65));+#1598=ORIENTED_EDGE('',*,*,#1599,.T.);+#1599=EDGE_CURVE('',#1593,#1600,#1602,.T.);+#1600=VERTEX_POINT('',#1601);+#1601=CARTESIAN_POINT('',(1.025,3.882385590716,0.165270364467));+#1602=LINE('',#1594,#870);+#1603=ORIENTED_EDGE('',*,*,#1604,.T.);+#1604=EDGE_CURVE('',#1600,#1605,#1607,.T.);+#1605=VERTEX_POINT('',#1606);+#1606=CARTESIAN_POINT('',(1.025,4.079347141319,1.387778780781E-16));+#1607=CIRCLE('',#1608,0.2);+#1608=AXIS2_PLACEMENT_3D('',#1609,#216,#879);+#1609=CARTESIAN_POINT('',(1.025,4.079347141319,0.2));+#1610=ORIENTED_EDGE('',*,*,#1611,.T.);+#1611=EDGE_CURVE('',#1605,#1612,#1614,.T.);+#1612=VERTEX_POINT('',#1613);+#1613=CARTESIAN_POINT('',(1.025,4.5,1.387778780781E-16));+#1614=LINE('',#1606,#203);+#1615=ORIENTED_EDGE('',*,*,#1616,.T.);+#1616=EDGE_CURVE('',#1612,#1617,#1619,.T.);+#1617=VERTEX_POINT('',#1618);+#1618=CARTESIAN_POINT('',(1.025,4.5,0.1));+#1619=LINE('',#1613,#188);+#1620=ORIENTED_EDGE('',*,*,#1621,.T.);+#1621=EDGE_CURVE('',#1617,#1622,#1624,.T.);+#1622=VERTEX_POINT('',#1623);+#1623=CARTESIAN_POINT('',(1.025,4.079347141319,0.1));+#1624=LINE('',#1618,#816);+#1625=ORIENTED_EDGE('',*,*,#1626,.T.);+#1626=EDGE_CURVE('',#1622,#1627,#1629,.T.);+#1627=VERTEX_POINT('',#1628);+#1628=CARTESIAN_POINT('',(1.025,3.980866366018,0.182635182233));+#1629=CIRCLE('',#1630,1.E-01);+#1630=AXIS2_PLACEMENT_3D('',#1609,#901,#902);+#1631=ORIENTED_EDGE('',*,*,#1632,.T.);+#1632=EDGE_CURVE('',#1627,#1633,#1635,.T.);+#1633=VERTEX_POINT('',#1634);+#1634=CARTESIAN_POINT('',(1.025,3.896961550602,0.684729635533));+#1635=LINE('',#1628,#908);+#1636=ORIENTED_EDGE('',*,*,#1637,.T.);+#1637=EDGE_CURVE('',#1633,#1638,#1639,.T.);+#1638=VERTEX_POINT('',#1583);+#1639=CIRCLE('',#1640,0.2);+#1640=AXIS2_PLACEMENT_3D('',#1597,#14,#915);+#1641=ORIENTED_EDGE('',*,*,#1642,.T.);+#1642=EDGE_CURVE('',#1638,#387,#1582,.T.);+#1643=PLANE('',#1644);+#1644=AXIS2_PLACEMENT_3D('',#1645,#216,#13);+#1645=CARTESIAN_POINT('',(1.025,3.914276639233,0.410238158856));+#1646=ADVANCED_FACE('',(#1647),#1661,.F.);+#1647=FACE_BOUND('',#1648,.F.);+#1648=EDGE_LOOP('',(#1649,#1650,#1657,#1660));+#1649=ORIENTED_EDGE('',*,*,#410,.T.);+#1650=ORIENTED_EDGE('',*,*,#1651,.T.);+#1651=EDGE_CURVE('',#405,#1652,#1654,.T.);+#1652=VERTEX_POINT('',#1653);+#1653=CARTESIAN_POINT('',(1.375,3.798480775301,0.667364817767));+#1654=CIRCLE('',#1655,0.1);+#1655=AXIS2_PLACEMENT_3D('',#1656,#863,#864);+#1656=CARTESIAN_POINT('',(1.375,3.7,0.65));+#1657=ORIENTED_EDGE('',*,*,#1658,.F.);+#1658=EDGE_CURVE('',#1593,#1652,#1659,.T.);+#1659=LINE('',#1594,#215);+#1660=ORIENTED_EDGE('',*,*,#1592,.F.);+#1661=CYLINDRICAL_SURFACE('',#1596,0.1);+#1662=ADVANCED_FACE('',(#1663),#1712,.T.);+#1663=FACE_BOUND('',#1664,.T.);+#1664=EDGE_LOOP('',(#417,#403,#1650,#1665,#1670,#1677,#1682,#1687,#1692,#1698,#1703,#1709));+#1665=ORIENTED_EDGE('',*,*,#1666,.T.);+#1666=EDGE_CURVE('',#1652,#1667,#1669,.T.);+#1667=VERTEX_POINT('',#1668);+#1668=CARTESIAN_POINT('',(1.375,3.882385590716,0.165270364467));+#1669=LINE('',#1653,#870);+#1670=ORIENTED_EDGE('',*,*,#1671,.T.);+#1671=EDGE_CURVE('',#1667,#1672,#1674,.T.);+#1672=VERTEX_POINT('',#1673);+#1673=CARTESIAN_POINT('',(1.375,4.079347141319,1.387778780781E-16));+#1674=CIRCLE('',#1675,0.2);+#1675=AXIS2_PLACEMENT_3D('',#1676,#216,#879);+#1676=CARTESIAN_POINT('',(1.375,4.079347141319,0.2));+#1677=ORIENTED_EDGE('',*,*,#1678,.T.);+#1678=EDGE_CURVE('',#1672,#1679,#1681,.T.);+#1679=VERTEX_POINT('',#1680);+#1680=CARTESIAN_POINT('',(1.375,4.5,1.387778780781E-16));+#1681=LINE('',#1673,#203);+#1682=ORIENTED_EDGE('',*,*,#1683,.T.);+#1683=EDGE_CURVE('',#1679,#1684,#1686,.T.);+#1684=VERTEX_POINT('',#1685);+#1685=CARTESIAN_POINT('',(1.375,4.5,0.1));+#1686=LINE('',#1680,#188);+#1687=ORIENTED_EDGE('',*,*,#1688,.T.);+#1688=EDGE_CURVE('',#1684,#1689,#1691,.T.);+#1689=VERTEX_POINT('',#1690);+#1690=CARTESIAN_POINT('',(1.375,4.079347141319,0.1));+#1691=LINE('',#1685,#816);+#1692=ORIENTED_EDGE('',*,*,#1693,.T.);+#1693=EDGE_CURVE('',#1689,#1694,#1696,.T.);+#1694=VERTEX_POINT('',#1695);+#1695=CARTESIAN_POINT('',(1.375,3.980866366018,0.182635182233));+#1696=CIRCLE('',#1697,1.E-01);+#1697=AXIS2_PLACEMENT_3D('',#1676,#901,#902);+#1698=ORIENTED_EDGE('',*,*,#1699,.T.);+#1699=EDGE_CURVE('',#1694,#1700,#1702,.T.);+#1700=VERTEX_POINT('',#1701);+#1701=CARTESIAN_POINT('',(1.375,3.896961550602,0.684729635533));+#1702=LINE('',#1695,#908);+#1703=ORIENTED_EDGE('',*,*,#1704,.T.);+#1704=EDGE_CURVE('',#1700,#1705,#1707,.T.);+#1705=VERTEX_POINT('',#1706);+#1706=CARTESIAN_POINT('',(1.375,3.7,0.85));+#1707=CIRCLE('',#1708,0.2);+#1708=AXIS2_PLACEMENT_3D('',#1656,#14,#915);+#1709=ORIENTED_EDGE('',*,*,#1710,.T.);+#1710=EDGE_CURVE('',#1705,#419,#1711,.T.);+#1711=LINE('',#1706,#816);+#1712=PLANE('',#1713);+#1713=AXIS2_PLACEMENT_3D('',#1714,#216,#13);+#1714=CARTESIAN_POINT('',(1.375,3.914276639233,0.410238158856));+#1715=ADVANCED_FACE('',(#1716),#846,.F.);+#1716=FACE_BOUND('',#1717,.F.);+#1717=EDGE_LOOP('',(#1718,#1722,#1723,#1729));+#1718=ORIENTED_EDGE('',*,*,#1719,.F.);+#1719=EDGE_CURVE('',#419,#1720,#1711,.T.);+#1720=VERTEX_POINT('',#1721);+#1721=CARTESIAN_POINT('',(1.375,3.425,0.85));+#1722=ORIENTED_EDGE('',*,*,#431,.T.);+#1723=ORIENTED_EDGE('',*,*,#1724,.T.);+#1724=EDGE_CURVE('',#426,#1725,#1727,.T.);+#1725=VERTEX_POINT('',#1726);+#1726=CARTESIAN_POINT('',(1.825,3.425,0.85));+#1727=LINE('',#1728,#816);+#1728=CARTESIAN_POINT('',(1.825,3.7,0.85));+#1729=ORIENTED_EDGE('',*,*,#1730,.F.);+#1730=EDGE_CURVE('',#1720,#1725,#822,.T.);+#1731=ADVANCED_FACE('',(#1732),#1788,.F.);+#1732=FACE_BOUND('',#1733,.F.);+#1733=EDGE_LOOP('',(#1734,#1735,#1736,#1743,#1748,#1755,#1760,#1765,#1770,#1776,#1781,#1786));+#1734=ORIENTED_EDGE('',*,*,#425,.F.);+#1735=ORIENTED_EDGE('',*,*,#436,.T.);+#1736=ORIENTED_EDGE('',*,*,#1737,.T.);+#1737=EDGE_CURVE('',#437,#1738,#1740,.T.);+#1738=VERTEX_POINT('',#1739);+#1739=CARTESIAN_POINT('',(1.825,3.798480775301,0.667364817767));+#1740=CIRCLE('',#1741,0.1);+#1741=AXIS2_PLACEMENT_3D('',#1742,#863,#864);+#1742=CARTESIAN_POINT('',(1.825,3.7,0.65));+#1743=ORIENTED_EDGE('',*,*,#1744,.T.);+#1744=EDGE_CURVE('',#1738,#1745,#1747,.T.);+#1745=VERTEX_POINT('',#1746);+#1746=CARTESIAN_POINT('',(1.825,3.882385590716,0.165270364467));+#1747=LINE('',#1739,#870);+#1748=ORIENTED_EDGE('',*,*,#1749,.T.);+#1749=EDGE_CURVE('',#1745,#1750,#1752,.T.);+#1750=VERTEX_POINT('',#1751);+#1751=CARTESIAN_POINT('',(1.825,4.079347141319,1.387778780781E-16));+#1752=CIRCLE('',#1753,0.2);+#1753=AXIS2_PLACEMENT_3D('',#1754,#216,#879);+#1754=CARTESIAN_POINT('',(1.825,4.079347141319,0.2));+#1755=ORIENTED_EDGE('',*,*,#1756,.T.);+#1756=EDGE_CURVE('',#1750,#1757,#1759,.T.);+#1757=VERTEX_POINT('',#1758);+#1758=CARTESIAN_POINT('',(1.825,4.5,1.387778780781E-16));+#1759=LINE('',#1751,#203);+#1760=ORIENTED_EDGE('',*,*,#1761,.T.);+#1761=EDGE_CURVE('',#1757,#1762,#1764,.T.);+#1762=VERTEX_POINT('',#1763);+#1763=CARTESIAN_POINT('',(1.825,4.5,0.1));+#1764=LINE('',#1758,#188);+#1765=ORIENTED_EDGE('',*,*,#1766,.T.);+#1766=EDGE_CURVE('',#1762,#1767,#1769,.T.);+#1767=VERTEX_POINT('',#1768);+#1768=CARTESIAN_POINT('',(1.825,4.079347141319,0.1));+#1769=LINE('',#1763,#816);+#1770=ORIENTED_EDGE('',*,*,#1771,.T.);+#1771=EDGE_CURVE('',#1767,#1772,#1774,.T.);+#1772=VERTEX_POINT('',#1773);+#1773=CARTESIAN_POINT('',(1.825,3.980866366018,0.182635182233));+#1774=CIRCLE('',#1775,1.E-01);+#1775=AXIS2_PLACEMENT_3D('',#1754,#901,#902);+#1776=ORIENTED_EDGE('',*,*,#1777,.T.);+#1777=EDGE_CURVE('',#1772,#1778,#1780,.T.);+#1778=VERTEX_POINT('',#1779);+#1779=CARTESIAN_POINT('',(1.825,3.896961550602,0.684729635533));+#1780=LINE('',#1773,#908);+#1781=ORIENTED_EDGE('',*,*,#1782,.T.);+#1782=EDGE_CURVE('',#1778,#1783,#1784,.T.);+#1783=VERTEX_POINT('',#1728);+#1784=CIRCLE('',#1785,0.2);+#1785=AXIS2_PLACEMENT_3D('',#1742,#14,#915);+#1786=ORIENTED_EDGE('',*,*,#1787,.T.);+#1787=EDGE_CURVE('',#1783,#426,#1727,.T.);+#1788=PLANE('',#1789);+#1789=AXIS2_PLACEMENT_3D('',#1790,#216,#13);+#1790=CARTESIAN_POINT('',(1.825,3.914276639233,0.410238158856));+#1791=ADVANCED_FACE('',(#1792),#1806,.F.);+#1792=FACE_BOUND('',#1793,.F.);+#1793=EDGE_LOOP('',(#1794,#1795,#1802,#1805));+#1794=ORIENTED_EDGE('',*,*,#449,.T.);+#1795=ORIENTED_EDGE('',*,*,#1796,.T.);+#1796=EDGE_CURVE('',#444,#1797,#1799,.T.);+#1797=VERTEX_POINT('',#1798);+#1798=CARTESIAN_POINT('',(2.175,3.798480775301,0.667364817767));+#1799=CIRCLE('',#1800,0.1);+#1800=AXIS2_PLACEMENT_3D('',#1801,#863,#864);+#1801=CARTESIAN_POINT('',(2.175,3.7,0.65));+#1802=ORIENTED_EDGE('',*,*,#1803,.F.);+#1803=EDGE_CURVE('',#1738,#1797,#1804,.T.);+#1804=LINE('',#1739,#215);+#1805=ORIENTED_EDGE('',*,*,#1737,.F.);+#1806=CYLINDRICAL_SURFACE('',#1741,0.1);+#1807=ADVANCED_FACE('',(#1808),#1857,.T.);+#1808=FACE_BOUND('',#1809,.T.);+#1809=EDGE_LOOP('',(#456,#442,#1795,#1810,#1815,#1822,#1827,#1832,#1837,#1843,#1848,#1854));+#1810=ORIENTED_EDGE('',*,*,#1811,.T.);+#1811=EDGE_CURVE('',#1797,#1812,#1814,.T.);+#1812=VERTEX_POINT('',#1813);+#1813=CARTESIAN_POINT('',(2.175,3.882385590716,0.165270364467));+#1814=LINE('',#1798,#870);+#1815=ORIENTED_EDGE('',*,*,#1816,.T.);+#1816=EDGE_CURVE('',#1812,#1817,#1819,.T.);+#1817=VERTEX_POINT('',#1818);+#1818=CARTESIAN_POINT('',(2.175,4.079347141319,1.387778780781E-16));+#1819=CIRCLE('',#1820,0.2);+#1820=AXIS2_PLACEMENT_3D('',#1821,#216,#879);+#1821=CARTESIAN_POINT('',(2.175,4.079347141319,0.2));+#1822=ORIENTED_EDGE('',*,*,#1823,.T.);+#1823=EDGE_CURVE('',#1817,#1824,#1826,.T.);+#1824=VERTEX_POINT('',#1825);+#1825=CARTESIAN_POINT('',(2.175,4.5,1.387778780781E-16));+#1826=LINE('',#1818,#203);+#1827=ORIENTED_EDGE('',*,*,#1828,.T.);+#1828=EDGE_CURVE('',#1824,#1829,#1831,.T.);+#1829=VERTEX_POINT('',#1830);+#1830=CARTESIAN_POINT('',(2.175,4.5,0.1));+#1831=LINE('',#1825,#188);+#1832=ORIENTED_EDGE('',*,*,#1833,.T.);+#1833=EDGE_CURVE('',#1829,#1834,#1836,.T.);+#1834=VERTEX_POINT('',#1835);+#1835=CARTESIAN_POINT('',(2.175,4.079347141319,0.1));+#1836=LINE('',#1830,#816);+#1837=ORIENTED_EDGE('',*,*,#1838,.T.);+#1838=EDGE_CURVE('',#1834,#1839,#1841,.T.);+#1839=VERTEX_POINT('',#1840);+#1840=CARTESIAN_POINT('',(2.175,3.980866366018,0.182635182233));+#1841=CIRCLE('',#1842,1.E-01);+#1842=AXIS2_PLACEMENT_3D('',#1821,#901,#902);+#1843=ORIENTED_EDGE('',*,*,#1844,.T.);+#1844=EDGE_CURVE('',#1839,#1845,#1847,.T.);+#1845=VERTEX_POINT('',#1846);+#1846=CARTESIAN_POINT('',(2.175,3.896961550602,0.684729635533));+#1847=LINE('',#1840,#908);+#1848=ORIENTED_EDGE('',*,*,#1849,.T.);+#1849=EDGE_CURVE('',#1845,#1850,#1852,.T.);+#1850=VERTEX_POINT('',#1851);+#1851=CARTESIAN_POINT('',(2.175,3.7,0.85));+#1852=CIRCLE('',#1853,0.2);+#1853=AXIS2_PLACEMENT_3D('',#1801,#14,#915);+#1854=ORIENTED_EDGE('',*,*,#1855,.T.);+#1855=EDGE_CURVE('',#1850,#458,#1856,.T.);+#1856=LINE('',#1851,#816);+#1857=PLANE('',#1858);+#1858=AXIS2_PLACEMENT_3D('',#1859,#216,#13);+#1859=CARTESIAN_POINT('',(2.175,3.914276639233,0.410238158856));+#1860=ADVANCED_FACE('',(#1861),#846,.F.);+#1861=FACE_BOUND('',#1862,.F.);+#1862=EDGE_LOOP('',(#1863,#1867,#1868,#1874));+#1863=ORIENTED_EDGE('',*,*,#1864,.F.);+#1864=EDGE_CURVE('',#458,#1865,#1856,.T.);+#1865=VERTEX_POINT('',#1866);+#1866=CARTESIAN_POINT('',(2.175,3.425,0.85));+#1867=ORIENTED_EDGE('',*,*,#470,.T.);+#1868=ORIENTED_EDGE('',*,*,#1869,.T.);+#1869=EDGE_CURVE('',#465,#1870,#1872,.T.);+#1870=VERTEX_POINT('',#1871);+#1871=CARTESIAN_POINT('',(2.625,3.425,0.85));+#1872=LINE('',#1873,#816);+#1873=CARTESIAN_POINT('',(2.625,3.7,0.85));+#1874=ORIENTED_EDGE('',*,*,#1875,.F.);+#1875=EDGE_CURVE('',#1865,#1870,#822,.T.);+#1876=ADVANCED_FACE('',(#1877),#1933,.F.);+#1877=FACE_BOUND('',#1878,.F.);+#1878=EDGE_LOOP('',(#1879,#1880,#1881,#1888,#1893,#1900,#1905,#1910,#1915,#1921,#1926,#1931));+#1879=ORIENTED_EDGE('',*,*,#464,.F.);+#1880=ORIENTED_EDGE('',*,*,#475,.T.);+#1881=ORIENTED_EDGE('',*,*,#1882,.T.);+#1882=EDGE_CURVE('',#476,#1883,#1885,.T.);+#1883=VERTEX_POINT('',#1884);+#1884=CARTESIAN_POINT('',(2.625,3.798480775301,0.667364817767));+#1885=CIRCLE('',#1886,0.1);+#1886=AXIS2_PLACEMENT_3D('',#1887,#863,#864);+#1887=CARTESIAN_POINT('',(2.625,3.7,0.65));+#1888=ORIENTED_EDGE('',*,*,#1889,.T.);+#1889=EDGE_CURVE('',#1883,#1890,#1892,.T.);+#1890=VERTEX_POINT('',#1891);+#1891=CARTESIAN_POINT('',(2.625,3.882385590716,0.165270364467));+#1892=LINE('',#1884,#870);+#1893=ORIENTED_EDGE('',*,*,#1894,.T.);+#1894=EDGE_CURVE('',#1890,#1895,#1897,.T.);+#1895=VERTEX_POINT('',#1896);+#1896=CARTESIAN_POINT('',(2.625,4.079347141319,1.387778780781E-16));+#1897=CIRCLE('',#1898,0.2);+#1898=AXIS2_PLACEMENT_3D('',#1899,#216,#879);+#1899=CARTESIAN_POINT('',(2.625,4.079347141319,0.2));+#1900=ORIENTED_EDGE('',*,*,#1901,.T.);+#1901=EDGE_CURVE('',#1895,#1902,#1904,.T.);+#1902=VERTEX_POINT('',#1903);+#1903=CARTESIAN_POINT('',(2.625,4.5,1.387778780781E-16));+#1904=LINE('',#1896,#203);+#1905=ORIENTED_EDGE('',*,*,#1906,.T.);+#1906=EDGE_CURVE('',#1902,#1907,#1909,.T.);+#1907=VERTEX_POINT('',#1908);+#1908=CARTESIAN_POINT('',(2.625,4.5,0.1));+#1909=LINE('',#1903,#188);+#1910=ORIENTED_EDGE('',*,*,#1911,.T.);+#1911=EDGE_CURVE('',#1907,#1912,#1914,.T.);+#1912=VERTEX_POINT('',#1913);+#1913=CARTESIAN_POINT('',(2.625,4.079347141319,0.1));+#1914=LINE('',#1908,#816);+#1915=ORIENTED_EDGE('',*,*,#1916,.T.);+#1916=EDGE_CURVE('',#1912,#1917,#1919,.T.);+#1917=VERTEX_POINT('',#1918);+#1918=CARTESIAN_POINT('',(2.625,3.980866366018,0.182635182233));+#1919=CIRCLE('',#1920,1.E-01);+#1920=AXIS2_PLACEMENT_3D('',#1899,#901,#902);+#1921=ORIENTED_EDGE('',*,*,#1922,.T.);+#1922=EDGE_CURVE('',#1917,#1923,#1925,.T.);+#1923=VERTEX_POINT('',#1924);+#1924=CARTESIAN_POINT('',(2.625,3.896961550602,0.684729635533));+#1925=LINE('',#1918,#908);+#1926=ORIENTED_EDGE('',*,*,#1927,.T.);+#1927=EDGE_CURVE('',#1923,#1928,#1929,.T.);+#1928=VERTEX_POINT('',#1873);+#1929=CIRCLE('',#1930,0.2);+#1930=AXIS2_PLACEMENT_3D('',#1887,#14,#915);+#1931=ORIENTED_EDGE('',*,*,#1932,.T.);+#1932=EDGE_CURVE('',#1928,#465,#1872,.T.);+#1933=PLANE('',#1934);+#1934=AXIS2_PLACEMENT_3D('',#1935,#216,#13);+#1935=CARTESIAN_POINT('',(2.625,3.914276639233,0.410238158856));+#1936=ADVANCED_FACE('',(#1937),#1951,.F.);+#1937=FACE_BOUND('',#1938,.F.);+#1938=EDGE_LOOP('',(#1939,#1940,#1947,#1950));+#1939=ORIENTED_EDGE('',*,*,#488,.T.);+#1940=ORIENTED_EDGE('',*,*,#1941,.T.);+#1941=EDGE_CURVE('',#483,#1942,#1944,.T.);+#1942=VERTEX_POINT('',#1943);+#1943=CARTESIAN_POINT('',(2.975,3.798480775301,0.667364817767));+#1944=CIRCLE('',#1945,0.1);+#1945=AXIS2_PLACEMENT_3D('',#1946,#863,#864);+#1946=CARTESIAN_POINT('',(2.975,3.7,0.65));+#1947=ORIENTED_EDGE('',*,*,#1948,.F.);+#1948=EDGE_CURVE('',#1883,#1942,#1949,.T.);+#1949=LINE('',#1884,#215);+#1950=ORIENTED_EDGE('',*,*,#1882,.F.);+#1951=CYLINDRICAL_SURFACE('',#1886,0.1);+#1952=ADVANCED_FACE('',(#1953),#2002,.T.);+#1953=FACE_BOUND('',#1954,.T.);+#1954=EDGE_LOOP('',(#495,#481,#1940,#1955,#1960,#1967,#1972,#1977,#1982,#1988,#1993,#1999));+#1955=ORIENTED_EDGE('',*,*,#1956,.T.);+#1956=EDGE_CURVE('',#1942,#1957,#1959,.T.);+#1957=VERTEX_POINT('',#1958);+#1958=CARTESIAN_POINT('',(2.975,3.882385590716,0.165270364467));+#1959=LINE('',#1943,#870);+#1960=ORIENTED_EDGE('',*,*,#1961,.T.);+#1961=EDGE_CURVE('',#1957,#1962,#1964,.T.);+#1962=VERTEX_POINT('',#1963);+#1963=CARTESIAN_POINT('',(2.975,4.079347141319,1.387778780781E-16));+#1964=CIRCLE('',#1965,0.2);+#1965=AXIS2_PLACEMENT_3D('',#1966,#216,#879);+#1966=CARTESIAN_POINT('',(2.975,4.079347141319,0.2));+#1967=ORIENTED_EDGE('',*,*,#1968,.T.);+#1968=EDGE_CURVE('',#1962,#1969,#1971,.T.);+#1969=VERTEX_POINT('',#1970);+#1970=CARTESIAN_POINT('',(2.975,4.5,1.387778780781E-16));+#1971=LINE('',#1963,#203);+#1972=ORIENTED_EDGE('',*,*,#1973,.T.);+#1973=EDGE_CURVE('',#1969,#1974,#1976,.T.);+#1974=VERTEX_POINT('',#1975);+#1975=CARTESIAN_POINT('',(2.975,4.5,0.1));+#1976=LINE('',#1970,#188);+#1977=ORIENTED_EDGE('',*,*,#1978,.T.);+#1978=EDGE_CURVE('',#1974,#1979,#1981,.T.);+#1979=VERTEX_POINT('',#1980);+#1980=CARTESIAN_POINT('',(2.975,4.079347141319,0.1));+#1981=LINE('',#1975,#816);+#1982=ORIENTED_EDGE('',*,*,#1983,.T.);+#1983=EDGE_CURVE('',#1979,#1984,#1986,.T.);+#1984=VERTEX_POINT('',#1985);+#1985=CARTESIAN_POINT('',(2.975,3.980866366018,0.182635182233));+#1986=CIRCLE('',#1987,1.E-01);+#1987=AXIS2_PLACEMENT_3D('',#1966,#901,#902);+#1988=ORIENTED_EDGE('',*,*,#1989,.T.);+#1989=EDGE_CURVE('',#1984,#1990,#1992,.T.);+#1990=VERTEX_POINT('',#1991);+#1991=CARTESIAN_POINT('',(2.975,3.896961550602,0.684729635533));+#1992=LINE('',#1985,#908);+#1993=ORIENTED_EDGE('',*,*,#1994,.T.);+#1994=EDGE_CURVE('',#1990,#1995,#1997,.T.);+#1995=VERTEX_POINT('',#1996);+#1996=CARTESIAN_POINT('',(2.975,3.7,0.85));+#1997=CIRCLE('',#1998,0.2);+#1998=AXIS2_PLACEMENT_3D('',#1946,#14,#915);+#1999=ORIENTED_EDGE('',*,*,#2000,.T.);+#2000=EDGE_CURVE('',#1995,#497,#2001,.T.);+#2001=LINE('',#1996,#816);+#2002=PLANE('',#2003);+#2003=AXIS2_PLACEMENT_3D('',#2004,#216,#13);+#2004=CARTESIAN_POINT('',(2.975,3.914276639233,0.410238158856));+#2005=ADVANCED_FACE('',(#2006),#846,.F.);+#2006=FACE_BOUND('',#2007,.F.);+#2007=EDGE_LOOP('',(#2008,#2012,#2013,#2014,#2019,#2025,#2030,#2035));+#2008=ORIENTED_EDGE('',*,*,#2009,.F.);+#2009=EDGE_CURVE('',#497,#2010,#2001,.T.);+#2010=VERTEX_POINT('',#2011);+#2011=CARTESIAN_POINT('',(2.975,3.425,0.85));+#2012=ORIENTED_EDGE('',*,*,#508,.T.);+#2013=ORIENTED_EDGE('',*,*,#785,.T.);+#2014=ORIENTED_EDGE('',*,*,#2015,.T.);+#2015=EDGE_CURVE('',#781,#2016,#2018,.T.);+#2016=VERTEX_POINT('',#2017);+#2017=CARTESIAN_POINT('',(3.5,2.975,0.85));+#2018=LINE('',#782,#122);+#2019=ORIENTED_EDGE('',*,*,#2020,.T.);+#2020=EDGE_CURVE('',#2016,#2021,#2023,.T.);+#2021=VERTEX_POINT('',#2022);+#2022=CARTESIAN_POINT('',(3.425,2.975,0.85));+#2023=LINE('',#2024,#136);+#2024=CARTESIAN_POINT('',(3.7,2.975,0.85));+#2025=ORIENTED_EDGE('',*,*,#2026,.F.);+#2026=EDGE_CURVE('',#2027,#2021,#2029,.T.);+#2027=VERTEX_POINT('',#2028);+#2028=CARTESIAN_POINT('',(3.425,3.2875,0.85));+#2029=LINE('',#2028,#122);+#2030=ORIENTED_EDGE('',*,*,#2031,.F.);+#2031=EDGE_CURVE('',#2032,#2027,#2034,.T.);+#2032=VERTEX_POINT('',#2033);+#2033=CARTESIAN_POINT('',(3.2875,3.425,0.85));+#2034=LINE('',#2033,#115);+#2035=ORIENTED_EDGE('',*,*,#2036,.F.);+#2036=EDGE_CURVE('',#2010,#2032,#822,.T.);+#2037=ADVANCED_FACE('',(#2038),#2053,.F.);+#2038=FACE_BOUND('',#2039,.F.);+#2039=EDGE_LOOP('',(#2040,#2044,#2045,#2051));+#2040=ORIENTED_EDGE('',*,*,#2041,.F.);+#2041=EDGE_CURVE('',#594,#2042,#2043,.T.);+#2042=VERTEX_POINT('',#845);+#2043=B_SPLINE_CURVE_WITH_KNOTS('',1,(#531,#845),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2044=ORIENTED_EDGE('',*,*,#593,.T.);+#2045=ORIENTED_EDGE('',*,*,#2046,.T.);+#2046=EDGE_CURVE('',#590,#2047,#2049,.T.);+#2047=VERTEX_POINT('',#2048);+#2048=CARTESIAN_POINT('',(-3.5,-2.975,0.85));+#2049=LINE('',#2050,#188);+#2050=CARTESIAN_POINT('',(-3.5,-2.975,0.630119079428));+#2051=ORIENTED_EDGE('',*,*,#2052,.F.);+#2052=EDGE_CURVE('',#2042,#2047,#844,.T.);+#2053=PLANE('',#2054);+#2054=AXIS2_PLACEMENT_3D('',#845,#28,#151);+#2055=ADVANCED_FACE('',(#2056),#2078,.F.);+#2056=FACE_BOUND('',#2057,.F.);+#2057=EDGE_LOOP('',(#2058,#2066,#2067,#2073));+#2058=ORIENTED_EDGE('',*,*,#2059,.F.);+#2059=EDGE_CURVE('',#590,#2060,#2062,.T.);+#2060=VERTEX_POINT('',#2061);+#2061=CARTESIAN_POINT('',(-3.7,-2.975,0.75));+#2062=LINE('',#2063,#2064);+#2063=CARTESIAN_POINT('',(-3.35,-2.975,0.75));+#2064=VECTOR('',#2065,1.);+#2065=DIRECTION('',(-1.,1.144237745222E-17,0.));+#2066=ORIENTED_EDGE('',*,*,#589,.T.);+#2067=ORIENTED_EDGE('',*,*,#2068,.T.);+#2068=EDGE_CURVE('',#586,#2069,#2071,.T.);+#2069=VERTEX_POINT('',#2070);+#2070=CARTESIAN_POINT('',(-3.7,-2.625,0.75));+#2071=LINE('',#2072,#2064);+#2072=CARTESIAN_POINT('',(-3.35,-2.625,0.75));+#2073=ORIENTED_EDGE('',*,*,#2074,.F.);+#2074=EDGE_CURVE('',#2060,#2069,#2075,.T.);+#2075=LINE('',#2061,#2076);+#2076=VECTOR('',#2077,1.);+#2077=DIRECTION('',(1.144237745222E-17,1.,0.));+#2078=PLANE('',#2079);+#2079=AXIS2_PLACEMENT_3D('',#2063,#13,#2065);+#2080=ADVANCED_FACE('',(#2081),#2053,.F.);+#2081=FACE_BOUND('',#2082,.F.);+#2082=EDGE_LOOP('',(#2083,#2089,#2090,#2096));+#2083=ORIENTED_EDGE('',*,*,#2084,.F.);+#2084=EDGE_CURVE('',#586,#2085,#2087,.T.);+#2085=VERTEX_POINT('',#2086);+#2086=CARTESIAN_POINT('',(-3.5,-2.625,0.85));+#2087=LINE('',#2088,#188);+#2088=CARTESIAN_POINT('',(-3.5,-2.625,0.630119079428));+#2089=ORIENTED_EDGE('',*,*,#585,.T.);+#2090=ORIENTED_EDGE('',*,*,#2091,.T.);+#2091=EDGE_CURVE('',#582,#2092,#2094,.T.);+#2092=VERTEX_POINT('',#2093);+#2093=CARTESIAN_POINT('',(-3.5,-2.175,0.85));+#2094=LINE('',#2095,#188);+#2095=CARTESIAN_POINT('',(-3.5,-2.175,0.630119079428));+#2096=ORIENTED_EDGE('',*,*,#2097,.F.);+#2097=EDGE_CURVE('',#2085,#2092,#844,.T.);+#2098=ADVANCED_FACE('',(#2099),#2117,.F.);+#2099=FACE_BOUND('',#2100,.F.);+#2100=EDGE_LOOP('',(#2101,#2107,#2108,#2114));+#2101=ORIENTED_EDGE('',*,*,#2102,.F.);+#2102=EDGE_CURVE('',#582,#2103,#2105,.T.);+#2103=VERTEX_POINT('',#2104);+#2104=CARTESIAN_POINT('',(-3.7,-2.175,0.75));+#2105=LINE('',#2106,#2064);+#2106=CARTESIAN_POINT('',(-3.35,-2.175,0.75));+#2107=ORIENTED_EDGE('',*,*,#581,.T.);+#2108=ORIENTED_EDGE('',*,*,#2109,.T.);+#2109=EDGE_CURVE('',#578,#2110,#2112,.T.);+#2110=VERTEX_POINT('',#2111);+#2111=CARTESIAN_POINT('',(-3.7,-1.825,0.75));+#2112=LINE('',#2113,#2064);+#2113=CARTESIAN_POINT('',(-3.35,-1.825,0.75));+#2114=ORIENTED_EDGE('',*,*,#2115,.F.);+#2115=EDGE_CURVE('',#2103,#2110,#2116,.T.);+#2116=LINE('',#2104,#2076);+#2117=PLANE('',#2118);+#2118=AXIS2_PLACEMENT_3D('',#2106,#13,#2065);+#2119=ADVANCED_FACE('',(#2120),#2053,.F.);+#2120=FACE_BOUND('',#2121,.F.);+#2121=EDGE_LOOP('',(#2122,#2128,#2129,#2135));+#2122=ORIENTED_EDGE('',*,*,#2123,.F.);+#2123=EDGE_CURVE('',#578,#2124,#2126,.T.);+#2124=VERTEX_POINT('',#2125);+#2125=CARTESIAN_POINT('',(-3.5,-1.825,0.85));+#2126=LINE('',#2127,#188);+#2127=CARTESIAN_POINT('',(-3.5,-1.825,0.630119079428));+#2128=ORIENTED_EDGE('',*,*,#577,.T.);+#2129=ORIENTED_EDGE('',*,*,#2130,.T.);+#2130=EDGE_CURVE('',#574,#2131,#2133,.T.);+#2131=VERTEX_POINT('',#2132);+#2132=CARTESIAN_POINT('',(-3.5,-1.375,0.85));+#2133=LINE('',#2134,#188);+#2134=CARTESIAN_POINT('',(-3.5,-1.375,0.630119079428));+#2135=ORIENTED_EDGE('',*,*,#2136,.F.);+#2136=EDGE_CURVE('',#2124,#2131,#844,.T.);+#2137=ADVANCED_FACE('',(#2138),#2156,.F.);+#2138=FACE_BOUND('',#2139,.F.);+#2139=EDGE_LOOP('',(#2140,#2146,#2147,#2153));+#2140=ORIENTED_EDGE('',*,*,#2141,.F.);+#2141=EDGE_CURVE('',#574,#2142,#2144,.T.);+#2142=VERTEX_POINT('',#2143);+#2143=CARTESIAN_POINT('',(-3.7,-1.375,0.75));+#2144=LINE('',#2145,#2064);+#2145=CARTESIAN_POINT('',(-3.35,-1.375,0.75));+#2146=ORIENTED_EDGE('',*,*,#573,.T.);+#2147=ORIENTED_EDGE('',*,*,#2148,.T.);+#2148=EDGE_CURVE('',#570,#2149,#2151,.T.);+#2149=VERTEX_POINT('',#2150);+#2150=CARTESIAN_POINT('',(-3.7,-1.025,0.75));+#2151=LINE('',#2152,#2064);+#2152=CARTESIAN_POINT('',(-3.35,-1.025,0.75));+#2153=ORIENTED_EDGE('',*,*,#2154,.F.);+#2154=EDGE_CURVE('',#2142,#2149,#2155,.T.);+#2155=LINE('',#2143,#2076);+#2156=PLANE('',#2157);+#2157=AXIS2_PLACEMENT_3D('',#2145,#13,#2065);+#2158=ADVANCED_FACE('',(#2159),#2053,.F.);+#2159=FACE_BOUND('',#2160,.F.);+#2160=EDGE_LOOP('',(#2161,#2167,#2168,#2174));+#2161=ORIENTED_EDGE('',*,*,#2162,.F.);+#2162=EDGE_CURVE('',#570,#2163,#2165,.T.);+#2163=VERTEX_POINT('',#2164);+#2164=CARTESIAN_POINT('',(-3.5,-1.025,0.85));+#2165=LINE('',#2166,#188);+#2166=CARTESIAN_POINT('',(-3.5,-1.025,0.630119079428));+#2167=ORIENTED_EDGE('',*,*,#569,.T.);+#2168=ORIENTED_EDGE('',*,*,#2169,.T.);+#2169=EDGE_CURVE('',#566,#2170,#2172,.T.);+#2170=VERTEX_POINT('',#2171);+#2171=CARTESIAN_POINT('',(-3.5,-0.575,0.85));+#2172=LINE('',#2173,#188);+#2173=CARTESIAN_POINT('',(-3.5,-0.575,0.630119079428));+#2174=ORIENTED_EDGE('',*,*,#2175,.F.);+#2175=EDGE_CURVE('',#2163,#2170,#844,.T.);+#2176=ADVANCED_FACE('',(#2177),#2195,.F.);+#2177=FACE_BOUND('',#2178,.F.);+#2178=EDGE_LOOP('',(#2179,#2185,#2186,#2192));+#2179=ORIENTED_EDGE('',*,*,#2180,.F.);+#2180=EDGE_CURVE('',#566,#2181,#2183,.T.);+#2181=VERTEX_POINT('',#2182);+#2182=CARTESIAN_POINT('',(-3.7,-0.575,0.75));+#2183=LINE('',#2184,#2064);+#2184=CARTESIAN_POINT('',(-3.35,-0.575,0.75));+#2185=ORIENTED_EDGE('',*,*,#565,.T.);+#2186=ORIENTED_EDGE('',*,*,#2187,.T.);+#2187=EDGE_CURVE('',#562,#2188,#2190,.T.);+#2188=VERTEX_POINT('',#2189);+#2189=CARTESIAN_POINT('',(-3.7,-0.225,0.75));+#2190=LINE('',#2191,#2064);+#2191=CARTESIAN_POINT('',(-3.35,-0.225,0.75));+#2192=ORIENTED_EDGE('',*,*,#2193,.F.);+#2193=EDGE_CURVE('',#2181,#2188,#2194,.T.);+#2194=LINE('',#2182,#2076);+#2195=PLANE('',#2196);+#2196=AXIS2_PLACEMENT_3D('',#2184,#13,#2065);+#2197=ADVANCED_FACE('',(#2198),#2053,.F.);+#2198=FACE_BOUND('',#2199,.F.);+#2199=EDGE_LOOP('',(#2200,#2206,#2207,#2213));+#2200=ORIENTED_EDGE('',*,*,#2201,.F.);+#2201=EDGE_CURVE('',#562,#2202,#2204,.T.);+#2202=VERTEX_POINT('',#2203);+#2203=CARTESIAN_POINT('',(-3.5,-0.225,0.85));+#2204=LINE('',#2205,#188);+#2205=CARTESIAN_POINT('',(-3.5,-0.225,0.630119079428));+#2206=ORIENTED_EDGE('',*,*,#561,.T.);+#2207=ORIENTED_EDGE('',*,*,#2208,.T.);+#2208=EDGE_CURVE('',#558,#2209,#2211,.T.);+#2209=VERTEX_POINT('',#2210);+#2210=CARTESIAN_POINT('',(-3.5,0.225,0.85));+#2211=LINE('',#2212,#188);+#2212=CARTESIAN_POINT('',(-3.5,0.225,0.630119079428));+#2213=ORIENTED_EDGE('',*,*,#2214,.F.);+#2214=EDGE_CURVE('',#2202,#2209,#844,.T.);+#2215=ADVANCED_FACE('',(#2216),#2234,.F.);+#2216=FACE_BOUND('',#2217,.F.);+#2217=EDGE_LOOP('',(#2218,#2224,#2225,#2231));+#2218=ORIENTED_EDGE('',*,*,#2219,.F.);+#2219=EDGE_CURVE('',#558,#2220,#2222,.T.);+#2220=VERTEX_POINT('',#2221);+#2221=CARTESIAN_POINT('',(-3.7,0.225,0.75));+#2222=LINE('',#2223,#2064);+#2223=CARTESIAN_POINT('',(-3.35,0.225,0.75));+#2224=ORIENTED_EDGE('',*,*,#557,.T.);+#2225=ORIENTED_EDGE('',*,*,#2226,.T.);+#2226=EDGE_CURVE('',#554,#2227,#2229,.T.);+#2227=VERTEX_POINT('',#2228);+#2228=CARTESIAN_POINT('',(-3.7,0.575,0.75));+#2229=LINE('',#2230,#2064);+#2230=CARTESIAN_POINT('',(-3.35,0.575,0.75));+#2231=ORIENTED_EDGE('',*,*,#2232,.F.);+#2232=EDGE_CURVE('',#2220,#2227,#2233,.T.);+#2233=LINE('',#2221,#2076);+#2234=PLANE('',#2235);+#2235=AXIS2_PLACEMENT_3D('',#2223,#13,#2065);+#2236=ADVANCED_FACE('',(#2237),#2053,.F.);+#2237=FACE_BOUND('',#2238,.F.);+#2238=EDGE_LOOP('',(#2239,#2245,#2246,#2252));+#2239=ORIENTED_EDGE('',*,*,#2240,.F.);+#2240=EDGE_CURVE('',#554,#2241,#2243,.T.);+#2241=VERTEX_POINT('',#2242);+#2242=CARTESIAN_POINT('',(-3.5,0.575,0.85));+#2243=LINE('',#2244,#188);+#2244=CARTESIAN_POINT('',(-3.5,0.575,0.630119079428));+#2245=ORIENTED_EDGE('',*,*,#553,.T.);+#2246=ORIENTED_EDGE('',*,*,#2247,.T.);+#2247=EDGE_CURVE('',#550,#2248,#2250,.T.);+#2248=VERTEX_POINT('',#2249);+#2249=CARTESIAN_POINT('',(-3.5,1.025,0.85));+#2250=LINE('',#2251,#188);+#2251=CARTESIAN_POINT('',(-3.5,1.025,0.630119079428));+#2252=ORIENTED_EDGE('',*,*,#2253,.F.);+#2253=EDGE_CURVE('',#2241,#2248,#844,.T.);+#2254=ADVANCED_FACE('',(#2255),#2273,.F.);+#2255=FACE_BOUND('',#2256,.F.);+#2256=EDGE_LOOP('',(#2257,#2263,#2264,#2270));+#2257=ORIENTED_EDGE('',*,*,#2258,.F.);+#2258=EDGE_CURVE('',#550,#2259,#2261,.T.);+#2259=VERTEX_POINT('',#2260);+#2260=CARTESIAN_POINT('',(-3.7,1.025,0.75));+#2261=LINE('',#2262,#2064);+#2262=CARTESIAN_POINT('',(-3.35,1.025,0.75));+#2263=ORIENTED_EDGE('',*,*,#549,.T.);+#2264=ORIENTED_EDGE('',*,*,#2265,.T.);+#2265=EDGE_CURVE('',#546,#2266,#2268,.T.);+#2266=VERTEX_POINT('',#2267);+#2267=CARTESIAN_POINT('',(-3.7,1.375,0.75));+#2268=LINE('',#2269,#2064);+#2269=CARTESIAN_POINT('',(-3.35,1.375,0.75));+#2270=ORIENTED_EDGE('',*,*,#2271,.F.);+#2271=EDGE_CURVE('',#2259,#2266,#2272,.T.);+#2272=LINE('',#2260,#2076);+#2273=PLANE('',#2274);+#2274=AXIS2_PLACEMENT_3D('',#2262,#13,#2065);+#2275=ADVANCED_FACE('',(#2276),#2053,.F.);+#2276=FACE_BOUND('',#2277,.F.);+#2277=EDGE_LOOP('',(#2278,#2284,#2285,#2291));+#2278=ORIENTED_EDGE('',*,*,#2279,.F.);+#2279=EDGE_CURVE('',#546,#2280,#2282,.T.);+#2280=VERTEX_POINT('',#2281);+#2281=CARTESIAN_POINT('',(-3.5,1.375,0.85));+#2282=LINE('',#2283,#188);+#2283=CARTESIAN_POINT('',(-3.5,1.375,0.630119079428));+#2284=ORIENTED_EDGE('',*,*,#545,.T.);+#2285=ORIENTED_EDGE('',*,*,#2286,.T.);+#2286=EDGE_CURVE('',#542,#2287,#2289,.T.);+#2287=VERTEX_POINT('',#2288);+#2288=CARTESIAN_POINT('',(-3.5,1.825,0.85));+#2289=LINE('',#2290,#188);+#2290=CARTESIAN_POINT('',(-3.5,1.825,0.630119079428));+#2291=ORIENTED_EDGE('',*,*,#2292,.F.);+#2292=EDGE_CURVE('',#2280,#2287,#844,.T.);+#2293=ADVANCED_FACE('',(#2294),#2312,.F.);+#2294=FACE_BOUND('',#2295,.F.);+#2295=EDGE_LOOP('',(#2296,#2302,#2303,#2309));+#2296=ORIENTED_EDGE('',*,*,#2297,.F.);+#2297=EDGE_CURVE('',#542,#2298,#2300,.T.);+#2298=VERTEX_POINT('',#2299);+#2299=CARTESIAN_POINT('',(-3.7,1.825,0.75));+#2300=LINE('',#2301,#2064);+#2301=CARTESIAN_POINT('',(-3.35,1.825,0.75));+#2302=ORIENTED_EDGE('',*,*,#541,.T.);+#2303=ORIENTED_EDGE('',*,*,#2304,.T.);+#2304=EDGE_CURVE('',#538,#2305,#2307,.T.);+#2305=VERTEX_POINT('',#2306);+#2306=CARTESIAN_POINT('',(-3.7,2.175,0.75));+#2307=LINE('',#2308,#2064);+#2308=CARTESIAN_POINT('',(-3.35,2.175,0.75));+#2309=ORIENTED_EDGE('',*,*,#2310,.F.);+#2310=EDGE_CURVE('',#2298,#2305,#2311,.T.);+#2311=LINE('',#2299,#2076);+#2312=PLANE('',#2313);+#2313=AXIS2_PLACEMENT_3D('',#2301,#13,#2065);+#2314=ADVANCED_FACE('',(#2315),#2053,.F.);+#2315=FACE_BOUND('',#2316,.F.);+#2316=EDGE_LOOP('',(#2317,#2323,#2324,#2330));+#2317=ORIENTED_EDGE('',*,*,#2318,.F.);+#2318=EDGE_CURVE('',#538,#2319,#2321,.T.);+#2319=VERTEX_POINT('',#2320);+#2320=CARTESIAN_POINT('',(-3.5,2.175,0.85));+#2321=LINE('',#2322,#188);+#2322=CARTESIAN_POINT('',(-3.5,2.175,0.630119079428));+#2323=ORIENTED_EDGE('',*,*,#537,.T.);+#2324=ORIENTED_EDGE('',*,*,#2325,.T.);+#2325=EDGE_CURVE('',#534,#2326,#2328,.T.);+#2326=VERTEX_POINT('',#2327);+#2327=CARTESIAN_POINT('',(-3.5,2.625,0.85));+#2328=LINE('',#2329,#188);+#2329=CARTESIAN_POINT('',(-3.5,2.625,0.630119079428));+#2330=ORIENTED_EDGE('',*,*,#2331,.F.);+#2331=EDGE_CURVE('',#2319,#2326,#844,.T.);+#2332=ADVANCED_FACE('',(#2333),#2351,.F.);+#2333=FACE_BOUND('',#2334,.F.);+#2334=EDGE_LOOP('',(#2335,#2341,#2342,#2348));+#2335=ORIENTED_EDGE('',*,*,#2336,.F.);+#2336=EDGE_CURVE('',#534,#2337,#2339,.T.);+#2337=VERTEX_POINT('',#2338);+#2338=CARTESIAN_POINT('',(-3.7,2.625,0.75));+#2339=LINE('',#2340,#2064);+#2340=CARTESIAN_POINT('',(-3.35,2.625,0.75));+#2341=ORIENTED_EDGE('',*,*,#533,.T.);+#2342=ORIENTED_EDGE('',*,*,#2343,.T.);+#2343=EDGE_CURVE('',#528,#2344,#2346,.T.);+#2344=VERTEX_POINT('',#2345);+#2345=CARTESIAN_POINT('',(-3.7,2.975,0.75));+#2346=LINE('',#2347,#2064);+#2347=CARTESIAN_POINT('',(-3.35,2.975,0.75));+#2348=ORIENTED_EDGE('',*,*,#2349,.F.);+#2349=EDGE_CURVE('',#2337,#2344,#2350,.T.);+#2350=LINE('',#2338,#2076);+#2351=PLANE('',#2352);+#2352=AXIS2_PLACEMENT_3D('',#2340,#13,#2065);+#2353=ADVANCED_FACE('',(#2354),#2053,.F.);+#2354=FACE_BOUND('',#2355,.F.);+#2355=EDGE_LOOP('',(#2356,#2360,#2361,#2362));+#2356=ORIENTED_EDGE('',*,*,#2357,.F.);+#2357=EDGE_CURVE('',#528,#836,#2358,.T.);+#2358=LINE('',#2359,#188);+#2359=CARTESIAN_POINT('',(-3.5,2.975,0.630119079428));+#2360=ORIENTED_EDGE('',*,*,#527,.T.);+#2361=ORIENTED_EDGE('',*,*,#801,.T.);+#2362=ORIENTED_EDGE('',*,*,#843,.F.);+#2363=ADVANCED_FACE('',(#2364),#2373,.F.);+#2364=FACE_BOUND('',#2365,.F.);+#2365=EDGE_LOOP('',(#2366,#2367,#2368,#2372));+#2366=ORIENTED_EDGE('',*,*,#780,.F.);+#2367=ORIENTED_EDGE('',*,*,#673,.T.);+#2368=ORIENTED_EDGE('',*,*,#2369,.T.);+#2369=EDGE_CURVE('',#670,#2016,#2370,.T.);+#2370=LINE('',#2371,#188);+#2371=CARTESIAN_POINT('',(3.5,2.975,0.630119079428));+#2372=ORIENTED_EDGE('',*,*,#2015,.F.);+#2373=PLANE('',#2374);+#2374=AXIS2_PLACEMENT_3D('',#782,#137,#123);+#2375=ADVANCED_FACE('',(#2376),#2394,.F.);+#2376=FACE_BOUND('',#2377,.F.);+#2377=EDGE_LOOP('',(#2378,#2384,#2385,#2391));+#2378=ORIENTED_EDGE('',*,*,#2379,.F.);+#2379=EDGE_CURVE('',#670,#2380,#2382,.T.);+#2380=VERTEX_POINT('',#2381);+#2381=CARTESIAN_POINT('',(3.7,2.975,0.75));+#2382=LINE('',#2383,#27);+#2383=CARTESIAN_POINT('',(3.35,2.975,0.75));+#2384=ORIENTED_EDGE('',*,*,#669,.T.);+#2385=ORIENTED_EDGE('',*,*,#2386,.T.);+#2386=EDGE_CURVE('',#666,#2387,#2389,.T.);+#2387=VERTEX_POINT('',#2388);+#2388=CARTESIAN_POINT('',(3.7,2.625,0.75));+#2389=LINE('',#2390,#27);+#2390=CARTESIAN_POINT('',(3.35,2.625,0.75));+#2391=ORIENTED_EDGE('',*,*,#2392,.F.);+#2392=EDGE_CURVE('',#2380,#2387,#2393,.T.);+#2393=LINE('',#2381,#122);+#2394=PLANE('',#2395);+#2395=AXIS2_PLACEMENT_3D('',#2383,#13,#28);+#2396=ADVANCED_FACE('',(#2397),#2373,.F.);+#2397=FACE_BOUND('',#2398,.F.);+#2398=EDGE_LOOP('',(#2399,#2405,#2406,#2412));+#2399=ORIENTED_EDGE('',*,*,#2400,.F.);+#2400=EDGE_CURVE('',#666,#2401,#2403,.T.);+#2401=VERTEX_POINT('',#2402);+#2402=CARTESIAN_POINT('',(3.5,2.625,0.85));+#2403=LINE('',#2404,#188);+#2404=CARTESIAN_POINT('',(3.5,2.625,0.630119079428));+#2405=ORIENTED_EDGE('',*,*,#665,.T.);+#2406=ORIENTED_EDGE('',*,*,#2407,.T.);+#2407=EDGE_CURVE('',#662,#2408,#2410,.T.);+#2408=VERTEX_POINT('',#2409);+#2409=CARTESIAN_POINT('',(3.5,2.175,0.85));+#2410=LINE('',#2411,#188);+#2411=CARTESIAN_POINT('',(3.5,2.175,0.630119079428));+#2412=ORIENTED_EDGE('',*,*,#2413,.F.);+#2413=EDGE_CURVE('',#2401,#2408,#2018,.T.);+#2414=ADVANCED_FACE('',(#2415),#2433,.F.);+#2415=FACE_BOUND('',#2416,.F.);+#2416=EDGE_LOOP('',(#2417,#2423,#2424,#2430));+#2417=ORIENTED_EDGE('',*,*,#2418,.F.);+#2418=EDGE_CURVE('',#662,#2419,#2421,.T.);+#2419=VERTEX_POINT('',#2420);+#2420=CARTESIAN_POINT('',(3.7,2.175,0.75));+#2421=LINE('',#2422,#27);+#2422=CARTESIAN_POINT('',(3.35,2.175,0.75));+#2423=ORIENTED_EDGE('',*,*,#661,.T.);+#2424=ORIENTED_EDGE('',*,*,#2425,.T.);+#2425=EDGE_CURVE('',#658,#2426,#2428,.T.);+#2426=VERTEX_POINT('',#2427);+#2427=CARTESIAN_POINT('',(3.7,1.825,0.75));+#2428=LINE('',#2429,#27);+#2429=CARTESIAN_POINT('',(3.35,1.825,0.75));+#2430=ORIENTED_EDGE('',*,*,#2431,.F.);+#2431=EDGE_CURVE('',#2419,#2426,#2432,.T.);+#2432=LINE('',#2420,#122);+#2433=PLANE('',#2434);+#2434=AXIS2_PLACEMENT_3D('',#2422,#13,#28);+#2435=ADVANCED_FACE('',(#2436),#2373,.F.);+#2436=FACE_BOUND('',#2437,.F.);+#2437=EDGE_LOOP('',(#2438,#2444,#2445,#2451));+#2438=ORIENTED_EDGE('',*,*,#2439,.F.);+#2439=EDGE_CURVE('',#658,#2440,#2442,.T.);+#2440=VERTEX_POINT('',#2441);+#2441=CARTESIAN_POINT('',(3.5,1.825,0.85));+#2442=LINE('',#2443,#188);+#2443=CARTESIAN_POINT('',(3.5,1.825,0.630119079428));+#2444=ORIENTED_EDGE('',*,*,#657,.T.);+#2445=ORIENTED_EDGE('',*,*,#2446,.T.);+#2446=EDGE_CURVE('',#654,#2447,#2449,.T.);+#2447=VERTEX_POINT('',#2448);+#2448=CARTESIAN_POINT('',(3.5,1.375,0.85));+#2449=LINE('',#2450,#188);+#2450=CARTESIAN_POINT('',(3.5,1.375,0.630119079428));+#2451=ORIENTED_EDGE('',*,*,#2452,.F.);+#2452=EDGE_CURVE('',#2440,#2447,#2018,.T.);+#2453=ADVANCED_FACE('',(#2454),#2472,.F.);+#2454=FACE_BOUND('',#2455,.F.);+#2455=EDGE_LOOP('',(#2456,#2462,#2463,#2469));+#2456=ORIENTED_EDGE('',*,*,#2457,.F.);+#2457=EDGE_CURVE('',#654,#2458,#2460,.T.);+#2458=VERTEX_POINT('',#2459);+#2459=CARTESIAN_POINT('',(3.7,1.375,0.75));+#2460=LINE('',#2461,#27);+#2461=CARTESIAN_POINT('',(3.35,1.375,0.75));+#2462=ORIENTED_EDGE('',*,*,#653,.T.);+#2463=ORIENTED_EDGE('',*,*,#2464,.T.);+#2464=EDGE_CURVE('',#650,#2465,#2467,.T.);+#2465=VERTEX_POINT('',#2466);+#2466=CARTESIAN_POINT('',(3.7,1.025,0.75));+#2467=LINE('',#2468,#27);+#2468=CARTESIAN_POINT('',(3.35,1.025,0.75));+#2469=ORIENTED_EDGE('',*,*,#2470,.F.);+#2470=EDGE_CURVE('',#2458,#2465,#2471,.T.);+#2471=LINE('',#2459,#122);+#2472=PLANE('',#2473);+#2473=AXIS2_PLACEMENT_3D('',#2461,#13,#28);+#2474=ADVANCED_FACE('',(#2475),#2373,.F.);+#2475=FACE_BOUND('',#2476,.F.);+#2476=EDGE_LOOP('',(#2477,#2483,#2484,#2490));+#2477=ORIENTED_EDGE('',*,*,#2478,.F.);+#2478=EDGE_CURVE('',#650,#2479,#2481,.T.);+#2479=VERTEX_POINT('',#2480);+#2480=CARTESIAN_POINT('',(3.5,1.025,0.85));+#2481=LINE('',#2482,#188);+#2482=CARTESIAN_POINT('',(3.5,1.025,0.630119079428));+#2483=ORIENTED_EDGE('',*,*,#649,.T.);+#2484=ORIENTED_EDGE('',*,*,#2485,.T.);+#2485=EDGE_CURVE('',#646,#2486,#2488,.T.);+#2486=VERTEX_POINT('',#2487);+#2487=CARTESIAN_POINT('',(3.5,0.575,0.85));+#2488=LINE('',#2489,#188);+#2489=CARTESIAN_POINT('',(3.5,0.575,0.630119079428));+#2490=ORIENTED_EDGE('',*,*,#2491,.F.);+#2491=EDGE_CURVE('',#2479,#2486,#2018,.T.);+#2492=ADVANCED_FACE('',(#2493),#2511,.F.);+#2493=FACE_BOUND('',#2494,.F.);+#2494=EDGE_LOOP('',(#2495,#2501,#2502,#2508));+#2495=ORIENTED_EDGE('',*,*,#2496,.F.);+#2496=EDGE_CURVE('',#646,#2497,#2499,.T.);+#2497=VERTEX_POINT('',#2498);+#2498=CARTESIAN_POINT('',(3.7,0.575,0.75));+#2499=LINE('',#2500,#27);+#2500=CARTESIAN_POINT('',(3.35,0.575,0.75));+#2501=ORIENTED_EDGE('',*,*,#645,.T.);+#2502=ORIENTED_EDGE('',*,*,#2503,.T.);+#2503=EDGE_CURVE('',#642,#2504,#2506,.T.);+#2504=VERTEX_POINT('',#2505);+#2505=CARTESIAN_POINT('',(3.7,0.225,0.75));+#2506=LINE('',#2507,#27);+#2507=CARTESIAN_POINT('',(3.35,0.225,0.75));+#2508=ORIENTED_EDGE('',*,*,#2509,.F.);+#2509=EDGE_CURVE('',#2497,#2504,#2510,.T.);+#2510=LINE('',#2498,#122);+#2511=PLANE('',#2512);+#2512=AXIS2_PLACEMENT_3D('',#2500,#13,#28);+#2513=ADVANCED_FACE('',(#2514),#2373,.F.);+#2514=FACE_BOUND('',#2515,.F.);+#2515=EDGE_LOOP('',(#2516,#2522,#2523,#2529));+#2516=ORIENTED_EDGE('',*,*,#2517,.F.);+#2517=EDGE_CURVE('',#642,#2518,#2520,.T.);+#2518=VERTEX_POINT('',#2519);+#2519=CARTESIAN_POINT('',(3.5,0.225,0.85));+#2520=LINE('',#2521,#188);+#2521=CARTESIAN_POINT('',(3.5,0.225,0.630119079428));+#2522=ORIENTED_EDGE('',*,*,#641,.T.);+#2523=ORIENTED_EDGE('',*,*,#2524,.T.);+#2524=EDGE_CURVE('',#638,#2525,#2527,.T.);+#2525=VERTEX_POINT('',#2526);+#2526=CARTESIAN_POINT('',(3.5,-0.225,0.85));+#2527=LINE('',#2528,#188);+#2528=CARTESIAN_POINT('',(3.5,-0.225,0.630119079428));+#2529=ORIENTED_EDGE('',*,*,#2530,.F.);+#2530=EDGE_CURVE('',#2518,#2525,#2018,.T.);+#2531=ADVANCED_FACE('',(#2532),#2550,.F.);+#2532=FACE_BOUND('',#2533,.F.);+#2533=EDGE_LOOP('',(#2534,#2540,#2541,#2547));+#2534=ORIENTED_EDGE('',*,*,#2535,.F.);+#2535=EDGE_CURVE('',#638,#2536,#2538,.T.);+#2536=VERTEX_POINT('',#2537);+#2537=CARTESIAN_POINT('',(3.7,-0.225,0.75));+#2538=LINE('',#2539,#27);+#2539=CARTESIAN_POINT('',(3.35,-0.225,0.75));+#2540=ORIENTED_EDGE('',*,*,#637,.T.);+#2541=ORIENTED_EDGE('',*,*,#2542,.T.);+#2542=EDGE_CURVE('',#634,#2543,#2545,.T.);+#2543=VERTEX_POINT('',#2544);+#2544=CARTESIAN_POINT('',(3.7,-0.575,0.75));+#2545=LINE('',#2546,#27);+#2546=CARTESIAN_POINT('',(3.35,-0.575,0.75));+#2547=ORIENTED_EDGE('',*,*,#2548,.F.);+#2548=EDGE_CURVE('',#2536,#2543,#2549,.T.);+#2549=LINE('',#2537,#122);+#2550=PLANE('',#2551);+#2551=AXIS2_PLACEMENT_3D('',#2539,#13,#28);+#2552=ADVANCED_FACE('',(#2553),#2373,.F.);+#2553=FACE_BOUND('',#2554,.F.);+#2554=EDGE_LOOP('',(#2555,#2561,#2562,#2568));+#2555=ORIENTED_EDGE('',*,*,#2556,.F.);+#2556=EDGE_CURVE('',#634,#2557,#2559,.T.);+#2557=VERTEX_POINT('',#2558);+#2558=CARTESIAN_POINT('',(3.5,-0.575,0.85));+#2559=LINE('',#2560,#188);+#2560=CARTESIAN_POINT('',(3.5,-0.575,0.630119079428));+#2561=ORIENTED_EDGE('',*,*,#633,.T.);+#2562=ORIENTED_EDGE('',*,*,#2563,.T.);+#2563=EDGE_CURVE('',#630,#2564,#2566,.T.);+#2564=VERTEX_POINT('',#2565);+#2565=CARTESIAN_POINT('',(3.5,-1.025,0.85));+#2566=LINE('',#2567,#188);+#2567=CARTESIAN_POINT('',(3.5,-1.025,0.630119079428));+#2568=ORIENTED_EDGE('',*,*,#2569,.F.);+#2569=EDGE_CURVE('',#2557,#2564,#2018,.T.);+#2570=ADVANCED_FACE('',(#2571),#2589,.F.);+#2571=FACE_BOUND('',#2572,.F.);+#2572=EDGE_LOOP('',(#2573,#2579,#2580,#2586));+#2573=ORIENTED_EDGE('',*,*,#2574,.F.);+#2574=EDGE_CURVE('',#630,#2575,#2577,.T.);+#2575=VERTEX_POINT('',#2576);+#2576=CARTESIAN_POINT('',(3.7,-1.025,0.75));+#2577=LINE('',#2578,#27);+#2578=CARTESIAN_POINT('',(3.35,-1.025,0.75));+#2579=ORIENTED_EDGE('',*,*,#629,.T.);+#2580=ORIENTED_EDGE('',*,*,#2581,.T.);+#2581=EDGE_CURVE('',#626,#2582,#2584,.T.);+#2582=VERTEX_POINT('',#2583);+#2583=CARTESIAN_POINT('',(3.7,-1.375,0.75));+#2584=LINE('',#2585,#27);+#2585=CARTESIAN_POINT('',(3.35,-1.375,0.75));+#2586=ORIENTED_EDGE('',*,*,#2587,.F.);+#2587=EDGE_CURVE('',#2575,#2582,#2588,.T.);+#2588=LINE('',#2576,#122);+#2589=PLANE('',#2590);+#2590=AXIS2_PLACEMENT_3D('',#2578,#13,#28);+#2591=ADVANCED_FACE('',(#2592),#2373,.F.);+#2592=FACE_BOUND('',#2593,.F.);+#2593=EDGE_LOOP('',(#2594,#2600,#2601,#2607));+#2594=ORIENTED_EDGE('',*,*,#2595,.F.);+#2595=EDGE_CURVE('',#626,#2596,#2598,.T.);+#2596=VERTEX_POINT('',#2597);+#2597=CARTESIAN_POINT('',(3.5,-1.375,0.85));+#2598=LINE('',#2599,#188);+#2599=CARTESIAN_POINT('',(3.5,-1.375,0.630119079428));+#2600=ORIENTED_EDGE('',*,*,#625,.T.);+#2601=ORIENTED_EDGE('',*,*,#2602,.T.);+#2602=EDGE_CURVE('',#622,#2603,#2605,.T.);+#2603=VERTEX_POINT('',#2604);+#2604=CARTESIAN_POINT('',(3.5,-1.825,0.85));+#2605=LINE('',#2606,#188);+#2606=CARTESIAN_POINT('',(3.5,-1.825,0.630119079428));+#2607=ORIENTED_EDGE('',*,*,#2608,.F.);+#2608=EDGE_CURVE('',#2596,#2603,#2018,.T.);+#2609=ADVANCED_FACE('',(#2610),#2628,.F.);+#2610=FACE_BOUND('',#2611,.F.);+#2611=EDGE_LOOP('',(#2612,#2618,#2619,#2625));+#2612=ORIENTED_EDGE('',*,*,#2613,.F.);+#2613=EDGE_CURVE('',#622,#2614,#2616,.T.);+#2614=VERTEX_POINT('',#2615);+#2615=CARTESIAN_POINT('',(3.7,-1.825,0.75));+#2616=LINE('',#2617,#27);+#2617=CARTESIAN_POINT('',(3.35,-1.825,0.75));+#2618=ORIENTED_EDGE('',*,*,#621,.T.);+#2619=ORIENTED_EDGE('',*,*,#2620,.T.);+#2620=EDGE_CURVE('',#618,#2621,#2623,.T.);+#2621=VERTEX_POINT('',#2622);+#2622=CARTESIAN_POINT('',(3.7,-2.175,0.75));+#2623=LINE('',#2624,#27);+#2624=CARTESIAN_POINT('',(3.35,-2.175,0.75));+#2625=ORIENTED_EDGE('',*,*,#2626,.F.);+#2626=EDGE_CURVE('',#2614,#2621,#2627,.T.);+#2627=LINE('',#2615,#122);+#2628=PLANE('',#2629);+#2629=AXIS2_PLACEMENT_3D('',#2617,#13,#28);+#2630=ADVANCED_FACE('',(#2631),#2373,.F.);+#2631=FACE_BOUND('',#2632,.F.);+#2632=EDGE_LOOP('',(#2633,#2639,#2640,#2646));+#2633=ORIENTED_EDGE('',*,*,#2634,.F.);+#2634=EDGE_CURVE('',#618,#2635,#2637,.T.);+#2635=VERTEX_POINT('',#2636);+#2636=CARTESIAN_POINT('',(3.5,-2.175,0.85));+#2637=LINE('',#2638,#188);+#2638=CARTESIAN_POINT('',(3.5,-2.175,0.630119079428));+#2639=ORIENTED_EDGE('',*,*,#617,.T.);+#2640=ORIENTED_EDGE('',*,*,#2641,.T.);+#2641=EDGE_CURVE('',#614,#2642,#2644,.T.);+#2642=VERTEX_POINT('',#2643);+#2643=CARTESIAN_POINT('',(3.5,-2.625,0.85));+#2644=LINE('',#2645,#188);+#2645=CARTESIAN_POINT('',(3.5,-2.625,0.630119079428));+#2646=ORIENTED_EDGE('',*,*,#2647,.F.);+#2647=EDGE_CURVE('',#2635,#2642,#2018,.T.);+#2648=ADVANCED_FACE('',(#2649),#2667,.F.);+#2649=FACE_BOUND('',#2650,.F.);+#2650=EDGE_LOOP('',(#2651,#2657,#2658,#2664));+#2651=ORIENTED_EDGE('',*,*,#2652,.F.);+#2652=EDGE_CURVE('',#614,#2653,#2655,.T.);+#2653=VERTEX_POINT('',#2654);+#2654=CARTESIAN_POINT('',(3.7,-2.625,0.75));+#2655=LINE('',#2656,#27);+#2656=CARTESIAN_POINT('',(3.35,-2.625,0.75));+#2657=ORIENTED_EDGE('',*,*,#613,.T.);+#2658=ORIENTED_EDGE('',*,*,#2659,.T.);+#2659=EDGE_CURVE('',#609,#2660,#2662,.T.);+#2660=VERTEX_POINT('',#2661);+#2661=CARTESIAN_POINT('',(3.7,-2.975,0.75));+#2662=LINE('',#2663,#27);+#2663=CARTESIAN_POINT('',(3.35,-2.975,0.75));+#2664=ORIENTED_EDGE('',*,*,#2665,.F.);+#2665=EDGE_CURVE('',#2653,#2660,#2666,.T.);+#2666=LINE('',#2654,#122);+#2667=PLANE('',#2668);+#2668=AXIS2_PLACEMENT_3D('',#2656,#13,#28);+#2669=ADVANCED_FACE('',(#2670),#2373,.F.);+#2670=FACE_BOUND('',#2671,.F.);+#2671=EDGE_LOOP('',(#2672,#2678,#2679,#2684));+#2672=ORIENTED_EDGE('',*,*,#2673,.F.);+#2673=EDGE_CURVE('',#609,#2674,#2676,.T.);+#2674=VERTEX_POINT('',#2675);+#2675=CARTESIAN_POINT('',(3.5,-2.975,0.85));+#2676=LINE('',#2677,#188);+#2677=CARTESIAN_POINT('',(3.5,-2.975,0.630119079428));+#2678=ORIENTED_EDGE('',*,*,#608,.T.);+#2679=ORIENTED_EDGE('',*,*,#2680,.T.);+#2680=EDGE_CURVE('',#604,#2681,#2683,.T.);+#2681=VERTEX_POINT('',#2682);+#2682=CARTESIAN_POINT('',(3.5,-3.325,0.85));+#2683=B_SPLINE_CURVE_WITH_KNOTS('',1,(#605,#2682),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2684=ORIENTED_EDGE('',*,*,#2685,.F.);+#2685=EDGE_CURVE('',#2674,#2681,#2018,.T.);+#2686=ADVANCED_FACE('',(#2687),#2699,.F.);+#2687=FACE_BOUND('',#2688,.F.);+#2688=EDGE_LOOP('',(#2689,#2690,#2691,#2696));+#2689=ORIENTED_EDGE('',*,*,#681,.T.);+#2690=ORIENTED_EDGE('',*,*,#2041,.T.);+#2691=ORIENTED_EDGE('',*,*,#2692,.F.);+#2692=EDGE_CURVE('',#2693,#2042,#2695,.T.);+#2693=VERTEX_POINT('',#2694);+#2694=CARTESIAN_POINT('',(-3.325,-3.5,0.85));+#2695=LINE('',#2694,#143);+#2696=ORIENTED_EDGE('',*,*,#2697,.F.);+#2697=EDGE_CURVE('',#682,#2693,#2698,.T.);+#2698=B_SPLINE_CURVE_WITH_KNOTS('',1,(#683,#2694),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2699=PLANE('',#2700);+#2700=AXIS2_PLACEMENT_3D('',#2694,#156,#144);+#2701=ADVANCED_FACE('',(#2702),#2714,.F.);+#2702=FACE_BOUND('',#2703,.F.);+#2703=EDGE_LOOP('',(#2704,#2705,#2710,#2713));+#2704=ORIENTED_EDGE('',*,*,#698,.T.);+#2705=ORIENTED_EDGE('',*,*,#2706,.T.);+#2706=EDGE_CURVE('',#694,#2707,#2709,.T.);+#2707=VERTEX_POINT('',#2708);+#2708=CARTESIAN_POINT('',(3.325,-3.5,0.85));+#2709=B_SPLINE_CURVE_WITH_KNOTS('',1,(#695,#2708),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2710=ORIENTED_EDGE('',*,*,#2711,.F.);+#2711=EDGE_CURVE('',#2681,#2707,#2712,.T.);+#2712=LINE('',#2682,#129);+#2713=ORIENTED_EDGE('',*,*,#2680,.F.);+#2714=PLANE('',#2715);+#2715=AXIS2_PLACEMENT_3D('',#2682,#144,#130);+#2716=ADVANCED_FACE('',(#2717),#2730,.F.);+#2717=FACE_BOUND('',#2718,.F.);+#2718=EDGE_LOOP('',(#2719,#2720,#2721,#2727));+#2719=ORIENTED_EDGE('',*,*,#2706,.F.);+#2720=ORIENTED_EDGE('',*,*,#772,.T.);+#2721=ORIENTED_EDGE('',*,*,#2722,.T.);+#2722=EDGE_CURVE('',#769,#2723,#2725,.T.);+#2723=VERTEX_POINT('',#2724);+#2724=CARTESIAN_POINT('',(2.975,-3.5,0.85));+#2725=LINE('',#2726,#188);+#2726=CARTESIAN_POINT('',(2.975,-3.5,0.630119079428));+#2727=ORIENTED_EDGE('',*,*,#2728,.F.);+#2728=EDGE_CURVE('',#2707,#2723,#2729,.T.);+#2729=LINE('',#2708,#136);+#2730=PLANE('',#2731);+#2731=AXIS2_PLACEMENT_3D('',#2708,#151,#137);+#2732=ADVANCED_FACE('',(#2733),#2755,.F.);+#2733=FACE_BOUND('',#2734,.F.);+#2734=EDGE_LOOP('',(#2735,#2743,#2744,#2750));+#2735=ORIENTED_EDGE('',*,*,#2736,.F.);+#2736=EDGE_CURVE('',#769,#2737,#2739,.T.);+#2737=VERTEX_POINT('',#2738);+#2738=CARTESIAN_POINT('',(2.975,-3.7,0.75));+#2739=LINE('',#2740,#2741);+#2740=CARTESIAN_POINT('',(2.975,-3.35,0.75));+#2741=VECTOR('',#2742,1.);+#2742=DIRECTION('',(-1.110223024625E-16,-1.,0.));+#2743=ORIENTED_EDGE('',*,*,#768,.T.);+#2744=ORIENTED_EDGE('',*,*,#2745,.T.);+#2745=EDGE_CURVE('',#765,#2746,#2748,.T.);+#2746=VERTEX_POINT('',#2747);+#2747=CARTESIAN_POINT('',(2.625,-3.7,0.75));+#2748=LINE('',#2749,#2741);+#2749=CARTESIAN_POINT('',(2.625,-3.35,0.75));+#2750=ORIENTED_EDGE('',*,*,#2751,.F.);+#2751=EDGE_CURVE('',#2737,#2746,#2752,.T.);+#2752=LINE('',#2738,#2753);+#2753=VECTOR('',#2754,1.);+#2754=DIRECTION('',(-1.,1.110223024625E-16,0.));+#2755=PLANE('',#2756);+#2756=AXIS2_PLACEMENT_3D('',#2740,#13,#2742);+#2757=ADVANCED_FACE('',(#2758),#2730,.F.);+#2758=FACE_BOUND('',#2759,.F.);+#2759=EDGE_LOOP('',(#2760,#2766,#2767,#2773));+#2760=ORIENTED_EDGE('',*,*,#2761,.F.);+#2761=EDGE_CURVE('',#765,#2762,#2764,.T.);+#2762=VERTEX_POINT('',#2763);+#2763=CARTESIAN_POINT('',(2.625,-3.5,0.85));+#2764=LINE('',#2765,#188);+#2765=CARTESIAN_POINT('',(2.625,-3.5,0.630119079428));+#2766=ORIENTED_EDGE('',*,*,#764,.T.);+#2767=ORIENTED_EDGE('',*,*,#2768,.T.);+#2768=EDGE_CURVE('',#761,#2769,#2771,.T.);+#2769=VERTEX_POINT('',#2770);+#2770=CARTESIAN_POINT('',(2.175,-3.5,0.85));+#2771=LINE('',#2772,#188);+#2772=CARTESIAN_POINT('',(2.175,-3.5,0.630119079428));+#2773=ORIENTED_EDGE('',*,*,#2774,.F.);+#2774=EDGE_CURVE('',#2762,#2769,#2729,.T.);+#2775=ADVANCED_FACE('',(#2776),#2794,.F.);+#2776=FACE_BOUND('',#2777,.F.);+#2777=EDGE_LOOP('',(#2778,#2784,#2785,#2791));+#2778=ORIENTED_EDGE('',*,*,#2779,.F.);+#2779=EDGE_CURVE('',#761,#2780,#2782,.T.);+#2780=VERTEX_POINT('',#2781);+#2781=CARTESIAN_POINT('',(2.175,-3.7,0.75));+#2782=LINE('',#2783,#2741);+#2783=CARTESIAN_POINT('',(2.175,-3.35,0.75));+#2784=ORIENTED_EDGE('',*,*,#760,.T.);+#2785=ORIENTED_EDGE('',*,*,#2786,.T.);+#2786=EDGE_CURVE('',#757,#2787,#2789,.T.);+#2787=VERTEX_POINT('',#2788);+#2788=CARTESIAN_POINT('',(1.825,-3.7,0.75));+#2789=LINE('',#2790,#2741);+#2790=CARTESIAN_POINT('',(1.825,-3.35,0.75));+#2791=ORIENTED_EDGE('',*,*,#2792,.F.);+#2792=EDGE_CURVE('',#2780,#2787,#2793,.T.);+#2793=LINE('',#2781,#2753);+#2794=PLANE('',#2795);+#2795=AXIS2_PLACEMENT_3D('',#2783,#13,#2742);+#2796=ADVANCED_FACE('',(#2797),#2730,.F.);+#2797=FACE_BOUND('',#2798,.F.);+#2798=EDGE_LOOP('',(#2799,#2805,#2806,#2812));+#2799=ORIENTED_EDGE('',*,*,#2800,.F.);+#2800=EDGE_CURVE('',#757,#2801,#2803,.T.);+#2801=VERTEX_POINT('',#2802);+#2802=CARTESIAN_POINT('',(1.825,-3.5,0.85));+#2803=LINE('',#2804,#188);+#2804=CARTESIAN_POINT('',(1.825,-3.5,0.630119079428));+#2805=ORIENTED_EDGE('',*,*,#756,.T.);+#2806=ORIENTED_EDGE('',*,*,#2807,.T.);+#2807=EDGE_CURVE('',#753,#2808,#2810,.T.);+#2808=VERTEX_POINT('',#2809);+#2809=CARTESIAN_POINT('',(1.375,-3.5,0.85));+#2810=LINE('',#2811,#188);+#2811=CARTESIAN_POINT('',(1.375,-3.5,0.630119079428));+#2812=ORIENTED_EDGE('',*,*,#2813,.F.);+#2813=EDGE_CURVE('',#2801,#2808,#2729,.T.);+#2814=ADVANCED_FACE('',(#2815),#2833,.F.);+#2815=FACE_BOUND('',#2816,.F.);+#2816=EDGE_LOOP('',(#2817,#2823,#2824,#2830));+#2817=ORIENTED_EDGE('',*,*,#2818,.F.);+#2818=EDGE_CURVE('',#753,#2819,#2821,.T.);+#2819=VERTEX_POINT('',#2820);+#2820=CARTESIAN_POINT('',(1.375,-3.7,0.75));+#2821=LINE('',#2822,#2741);+#2822=CARTESIAN_POINT('',(1.375,-3.35,0.75));+#2823=ORIENTED_EDGE('',*,*,#752,.T.);+#2824=ORIENTED_EDGE('',*,*,#2825,.T.);+#2825=EDGE_CURVE('',#749,#2826,#2828,.T.);+#2826=VERTEX_POINT('',#2827);+#2827=CARTESIAN_POINT('',(1.025,-3.7,0.75));+#2828=LINE('',#2829,#2741);+#2829=CARTESIAN_POINT('',(1.025,-3.35,0.75));+#2830=ORIENTED_EDGE('',*,*,#2831,.F.);+#2831=EDGE_CURVE('',#2819,#2826,#2832,.T.);+#2832=LINE('',#2820,#2753);+#2833=PLANE('',#2834);+#2834=AXIS2_PLACEMENT_3D('',#2822,#13,#2742);+#2835=ADVANCED_FACE('',(#2836),#2730,.F.);+#2836=FACE_BOUND('',#2837,.F.);+#2837=EDGE_LOOP('',(#2838,#2844,#2845,#2851));+#2838=ORIENTED_EDGE('',*,*,#2839,.F.);+#2839=EDGE_CURVE('',#749,#2840,#2842,.T.);+#2840=VERTEX_POINT('',#2841);+#2841=CARTESIAN_POINT('',(1.025,-3.5,0.85));+#2842=LINE('',#2843,#188);+#2843=CARTESIAN_POINT('',(1.025,-3.5,0.630119079428));+#2844=ORIENTED_EDGE('',*,*,#748,.T.);+#2845=ORIENTED_EDGE('',*,*,#2846,.T.);+#2846=EDGE_CURVE('',#745,#2847,#2849,.T.);+#2847=VERTEX_POINT('',#2848);+#2848=CARTESIAN_POINT('',(0.575,-3.5,0.85));+#2849=LINE('',#2850,#188);+#2850=CARTESIAN_POINT('',(0.575,-3.5,0.630119079428));+#2851=ORIENTED_EDGE('',*,*,#2852,.F.);+#2852=EDGE_CURVE('',#2840,#2847,#2729,.T.);+#2853=ADVANCED_FACE('',(#2854),#2872,.F.);+#2854=FACE_BOUND('',#2855,.F.);+#2855=EDGE_LOOP('',(#2856,#2862,#2863,#2869));+#2856=ORIENTED_EDGE('',*,*,#2857,.F.);+#2857=EDGE_CURVE('',#745,#2858,#2860,.T.);+#2858=VERTEX_POINT('',#2859);+#2859=CARTESIAN_POINT('',(0.575,-3.7,0.75));+#2860=LINE('',#2861,#2741);+#2861=CARTESIAN_POINT('',(0.575,-3.35,0.75));+#2862=ORIENTED_EDGE('',*,*,#744,.T.);+#2863=ORIENTED_EDGE('',*,*,#2864,.T.);+#2864=EDGE_CURVE('',#741,#2865,#2867,.T.);+#2865=VERTEX_POINT('',#2866);+#2866=CARTESIAN_POINT('',(0.225,-3.7,0.75));+#2867=LINE('',#2868,#2741);+#2868=CARTESIAN_POINT('',(0.225,-3.35,0.75));+#2869=ORIENTED_EDGE('',*,*,#2870,.F.);+#2870=EDGE_CURVE('',#2858,#2865,#2871,.T.);+#2871=LINE('',#2859,#2753);+#2872=PLANE('',#2873);+#2873=AXIS2_PLACEMENT_3D('',#2861,#13,#2742);+#2874=ADVANCED_FACE('',(#2875),#2730,.F.);+#2875=FACE_BOUND('',#2876,.F.);+#2876=EDGE_LOOP('',(#2877,#2883,#2884,#2890));+#2877=ORIENTED_EDGE('',*,*,#2878,.F.);+#2878=EDGE_CURVE('',#741,#2879,#2881,.T.);+#2879=VERTEX_POINT('',#2880);+#2880=CARTESIAN_POINT('',(0.225,-3.5,0.85));+#2881=LINE('',#2882,#188);+#2882=CARTESIAN_POINT('',(0.225,-3.5,0.630119079428));+#2883=ORIENTED_EDGE('',*,*,#740,.T.);+#2884=ORIENTED_EDGE('',*,*,#2885,.T.);+#2885=EDGE_CURVE('',#737,#2886,#2888,.T.);+#2886=VERTEX_POINT('',#2887);+#2887=CARTESIAN_POINT('',(-0.225,-3.5,0.85));+#2888=LINE('',#2889,#188);+#2889=CARTESIAN_POINT('',(-0.225,-3.5,0.630119079428));+#2890=ORIENTED_EDGE('',*,*,#2891,.F.);+#2891=EDGE_CURVE('',#2879,#2886,#2729,.T.);+#2892=ADVANCED_FACE('',(#2893),#2911,.F.);+#2893=FACE_BOUND('',#2894,.F.);+#2894=EDGE_LOOP('',(#2895,#2901,#2902,#2908));+#2895=ORIENTED_EDGE('',*,*,#2896,.F.);+#2896=EDGE_CURVE('',#737,#2897,#2899,.T.);+#2897=VERTEX_POINT('',#2898);+#2898=CARTESIAN_POINT('',(-0.225,-3.7,0.75));+#2899=LINE('',#2900,#2741);+#2900=CARTESIAN_POINT('',(-0.225,-3.35,0.75));+#2901=ORIENTED_EDGE('',*,*,#736,.T.);+#2902=ORIENTED_EDGE('',*,*,#2903,.T.);+#2903=EDGE_CURVE('',#733,#2904,#2906,.T.);+#2904=VERTEX_POINT('',#2905);+#2905=CARTESIAN_POINT('',(-0.575,-3.7,0.75));+#2906=LINE('',#2907,#2741);+#2907=CARTESIAN_POINT('',(-0.575,-3.35,0.75));+#2908=ORIENTED_EDGE('',*,*,#2909,.F.);+#2909=EDGE_CURVE('',#2897,#2904,#2910,.T.);+#2910=LINE('',#2898,#2753);+#2911=PLANE('',#2912);+#2912=AXIS2_PLACEMENT_3D('',#2900,#13,#2742);+#2913=ADVANCED_FACE('',(#2914),#2730,.F.);+#2914=FACE_BOUND('',#2915,.F.);+#2915=EDGE_LOOP('',(#2916,#2922,#2923,#2929));+#2916=ORIENTED_EDGE('',*,*,#2917,.F.);+#2917=EDGE_CURVE('',#733,#2918,#2920,.T.);+#2918=VERTEX_POINT('',#2919);+#2919=CARTESIAN_POINT('',(-0.575,-3.5,0.85));+#2920=LINE('',#2921,#188);+#2921=CARTESIAN_POINT('',(-0.575,-3.5,0.630119079428));+#2922=ORIENTED_EDGE('',*,*,#732,.T.);+#2923=ORIENTED_EDGE('',*,*,#2924,.T.);+#2924=EDGE_CURVE('',#729,#2925,#2927,.T.);+#2925=VERTEX_POINT('',#2926);+#2926=CARTESIAN_POINT('',(-1.025,-3.5,0.85));+#2927=LINE('',#2928,#188);+#2928=CARTESIAN_POINT('',(-1.025,-3.5,0.630119079428));+#2929=ORIENTED_EDGE('',*,*,#2930,.F.);+#2930=EDGE_CURVE('',#2918,#2925,#2729,.T.);+#2931=ADVANCED_FACE('',(#2932),#2950,.F.);+#2932=FACE_BOUND('',#2933,.F.);+#2933=EDGE_LOOP('',(#2934,#2940,#2941,#2947));+#2934=ORIENTED_EDGE('',*,*,#2935,.F.);+#2935=EDGE_CURVE('',#729,#2936,#2938,.T.);+#2936=VERTEX_POINT('',#2937);+#2937=CARTESIAN_POINT('',(-1.025,-3.7,0.75));+#2938=LINE('',#2939,#2741);+#2939=CARTESIAN_POINT('',(-1.025,-3.35,0.75));+#2940=ORIENTED_EDGE('',*,*,#728,.T.);+#2941=ORIENTED_EDGE('',*,*,#2942,.T.);+#2942=EDGE_CURVE('',#725,#2943,#2945,.T.);+#2943=VERTEX_POINT('',#2944);+#2944=CARTESIAN_POINT('',(-1.375,-3.7,0.75));+#2945=LINE('',#2946,#2741);+#2946=CARTESIAN_POINT('',(-1.375,-3.35,0.75));+#2947=ORIENTED_EDGE('',*,*,#2948,.F.);+#2948=EDGE_CURVE('',#2936,#2943,#2949,.T.);+#2949=LINE('',#2937,#2753);+#2950=PLANE('',#2951);+#2951=AXIS2_PLACEMENT_3D('',#2939,#13,#2742);+#2952=ADVANCED_FACE('',(#2953),#2730,.F.);+#2953=FACE_BOUND('',#2954,.F.);+#2954=EDGE_LOOP('',(#2955,#2961,#2962,#2968));+#2955=ORIENTED_EDGE('',*,*,#2956,.F.);+#2956=EDGE_CURVE('',#725,#2957,#2959,.T.);+#2957=VERTEX_POINT('',#2958);+#2958=CARTESIAN_POINT('',(-1.375,-3.5,0.85));+#2959=LINE('',#2960,#188);+#2960=CARTESIAN_POINT('',(-1.375,-3.5,0.630119079428));+#2961=ORIENTED_EDGE('',*,*,#724,.T.);+#2962=ORIENTED_EDGE('',*,*,#2963,.T.);+#2963=EDGE_CURVE('',#721,#2964,#2966,.T.);+#2964=VERTEX_POINT('',#2965);+#2965=CARTESIAN_POINT('',(-1.825,-3.5,0.85));+#2966=LINE('',#2967,#188);+#2967=CARTESIAN_POINT('',(-1.825,-3.5,0.630119079428));+#2968=ORIENTED_EDGE('',*,*,#2969,.F.);+#2969=EDGE_CURVE('',#2957,#2964,#2729,.T.);+#2970=ADVANCED_FACE('',(#2971),#2989,.F.);+#2971=FACE_BOUND('',#2972,.F.);+#2972=EDGE_LOOP('',(#2973,#2979,#2980,#2986));+#2973=ORIENTED_EDGE('',*,*,#2974,.F.);+#2974=EDGE_CURVE('',#721,#2975,#2977,.T.);+#2975=VERTEX_POINT('',#2976);+#2976=CARTESIAN_POINT('',(-1.825,-3.7,0.75));+#2977=LINE('',#2978,#2741);+#2978=CARTESIAN_POINT('',(-1.825,-3.35,0.75));+#2979=ORIENTED_EDGE('',*,*,#720,.T.);+#2980=ORIENTED_EDGE('',*,*,#2981,.T.);+#2981=EDGE_CURVE('',#717,#2982,#2984,.T.);+#2982=VERTEX_POINT('',#2983);+#2983=CARTESIAN_POINT('',(-2.175,-3.7,0.75));+#2984=LINE('',#2985,#2741);+#2985=CARTESIAN_POINT('',(-2.175,-3.35,0.75));+#2986=ORIENTED_EDGE('',*,*,#2987,.F.);+#2987=EDGE_CURVE('',#2975,#2982,#2988,.T.);+#2988=LINE('',#2976,#2753);+#2989=PLANE('',#2990);+#2990=AXIS2_PLACEMENT_3D('',#2978,#13,#2742);+#2991=ADVANCED_FACE('',(#2992),#2730,.F.);+#2992=FACE_BOUND('',#2993,.F.);+#2993=EDGE_LOOP('',(#2994,#3000,#3001,#3007));+#2994=ORIENTED_EDGE('',*,*,#2995,.F.);+#2995=EDGE_CURVE('',#717,#2996,#2998,.T.);+#2996=VERTEX_POINT('',#2997);+#2997=CARTESIAN_POINT('',(-2.175,-3.5,0.85));+#2998=LINE('',#2999,#188);+#2999=CARTESIAN_POINT('',(-2.175,-3.5,0.630119079428));+#3000=ORIENTED_EDGE('',*,*,#716,.T.);+#3001=ORIENTED_EDGE('',*,*,#3002,.T.);+#3002=EDGE_CURVE('',#713,#3003,#3005,.T.);+#3003=VERTEX_POINT('',#3004);+#3004=CARTESIAN_POINT('',(-2.625,-3.5,0.85));+#3005=LINE('',#3006,#188);+#3006=CARTESIAN_POINT('',(-2.625,-3.5,0.630119079428));+#3007=ORIENTED_EDGE('',*,*,#3008,.F.);+#3008=EDGE_CURVE('',#2996,#3003,#2729,.T.);+#3009=ADVANCED_FACE('',(#3010),#3028,.F.);+#3010=FACE_BOUND('',#3011,.F.);+#3011=EDGE_LOOP('',(#3012,#3018,#3019,#3025));+#3012=ORIENTED_EDGE('',*,*,#3013,.F.);+#3013=EDGE_CURVE('',#713,#3014,#3016,.T.);+#3014=VERTEX_POINT('',#3015);+#3015=CARTESIAN_POINT('',(-2.625,-3.7,0.75));+#3016=LINE('',#3017,#2741);+#3017=CARTESIAN_POINT('',(-2.625,-3.35,0.75));+#3018=ORIENTED_EDGE('',*,*,#712,.T.);+#3019=ORIENTED_EDGE('',*,*,#3020,.T.);+#3020=EDGE_CURVE('',#708,#3021,#3023,.T.);+#3021=VERTEX_POINT('',#3022);+#3022=CARTESIAN_POINT('',(-2.975,-3.7,0.75));+#3023=LINE('',#3024,#2741);+#3024=CARTESIAN_POINT('',(-2.975,-3.35,0.75));+#3025=ORIENTED_EDGE('',*,*,#3026,.F.);+#3026=EDGE_CURVE('',#3014,#3021,#3027,.T.);+#3027=LINE('',#3015,#2753);+#3028=PLANE('',#3029);+#3029=AXIS2_PLACEMENT_3D('',#3017,#13,#2742);+#3030=ADVANCED_FACE('',(#3031),#2730,.F.);+#3031=FACE_BOUND('',#3032,.F.);+#3032=EDGE_LOOP('',(#3033,#3039,#3040,#3041));+#3033=ORIENTED_EDGE('',*,*,#3034,.F.);+#3034=EDGE_CURVE('',#708,#3035,#3037,.T.);+#3035=VERTEX_POINT('',#3036);+#3036=CARTESIAN_POINT('',(-2.975,-3.5,0.85));+#3037=LINE('',#3038,#188);+#3038=CARTESIAN_POINT('',(-2.975,-3.5,0.630119079428));+#3039=ORIENTED_EDGE('',*,*,#707,.T.);+#3040=ORIENTED_EDGE('',*,*,#2697,.T.);+#3041=ORIENTED_EDGE('',*,*,#3042,.F.);+#3042=EDGE_CURVE('',#3035,#2693,#2729,.T.);+#3043=ADVANCED_FACE('',(#3044),#3064,.F.);+#3044=FACE_BOUND('',#3045,.F.);+#3045=EDGE_LOOP('',(#3046,#3051,#3055,#3057,#3058,#3062));+#3046=ORIENTED_EDGE('',*,*,#3047,.F.);+#3047=EDGE_CURVE('',#3048,#2326,#3050,.T.);+#3048=VERTEX_POINT('',#3049);+#3049=CARTESIAN_POINT('',(-3.7,2.625,0.85));+#3050=LINE('',#3049,#840);+#3051=ORIENTED_EDGE('',*,*,#3052,.T.);+#3052=EDGE_CURVE('',#3048,#3053,#3054,.T.);+#3053=VERTEX_POINT('',#839);+#3054=LINE('',#3049,#2076);+#3055=ORIENTED_EDGE('',*,*,#3056,.T.);+#3056=EDGE_CURVE('',#3053,#836,#838,.T.);+#3057=ORIENTED_EDGE('',*,*,#835,.T.);+#3058=ORIENTED_EDGE('',*,*,#3059,.F.);+#3059=EDGE_CURVE('',#3060,#830,#832,.T.);+#3060=VERTEX_POINT('',#3061);+#3061=CARTESIAN_POINT('',(-3.425,2.625,0.85));+#3062=ORIENTED_EDGE('',*,*,#3063,.F.);+#3063=EDGE_CURVE('',#2326,#3060,#3050,.T.);+#3064=PLANE('',#3065);+#3065=AXIS2_PLACEMENT_3D('',#3049,#3066,#841);+#3066=DIRECTION('',(0.,0.,-1.));+#3067=ADVANCED_FACE('',(#3068),#3144,.F.);+#3068=FACE_BOUND('',#3069,.F.);+#3069=EDGE_LOOP('',(#3070,#3075,#3079,#3083,#3087,#3091,#3095,#3099,#3103,#3107,#3111,#3115,#3119,#3123,#3127,#3129,#3130,#3131,#3136,#3141));+#3070=ORIENTED_EDGE('',*,*,#3071,.T.);+#3071=EDGE_CURVE('',#3072,#3073,#832,.T.);+#3072=VERTEX_POINT('',#833);+#3073=VERTEX_POINT('',#3074);+#3074=CARTESIAN_POINT('',(-3.425,-2.975,0.85));+#3075=ORIENTED_EDGE('',*,*,#3076,.T.);+#3076=EDGE_CURVE('',#3073,#3077,#832,.T.);+#3077=VERTEX_POINT('',#3078);+#3078=CARTESIAN_POINT('',(-3.425,-2.625,0.85));+#3079=ORIENTED_EDGE('',*,*,#3080,.T.);+#3080=EDGE_CURVE('',#3077,#3081,#832,.T.);+#3081=VERTEX_POINT('',#3082);+#3082=CARTESIAN_POINT('',(-3.425,-2.175,0.85));+#3083=ORIENTED_EDGE('',*,*,#3084,.T.);+#3084=EDGE_CURVE('',#3081,#3085,#832,.T.);+#3085=VERTEX_POINT('',#3086);+#3086=CARTESIAN_POINT('',(-3.425,-1.825,0.85));+#3087=ORIENTED_EDGE('',*,*,#3088,.T.);+#3088=EDGE_CURVE('',#3085,#3089,#832,.T.);+#3089=VERTEX_POINT('',#3090);+#3090=CARTESIAN_POINT('',(-3.425,-1.375,0.85));+#3091=ORIENTED_EDGE('',*,*,#3092,.T.);+#3092=EDGE_CURVE('',#3089,#3093,#832,.T.);+#3093=VERTEX_POINT('',#3094);+#3094=CARTESIAN_POINT('',(-3.425,-1.025,0.85));+#3095=ORIENTED_EDGE('',*,*,#3096,.T.);+#3096=EDGE_CURVE('',#3093,#3097,#832,.T.);+#3097=VERTEX_POINT('',#3098);+#3098=CARTESIAN_POINT('',(-3.425,-0.575,0.85));+#3099=ORIENTED_EDGE('',*,*,#3100,.T.);+#3100=EDGE_CURVE('',#3097,#3101,#832,.T.);+#3101=VERTEX_POINT('',#3102);+#3102=CARTESIAN_POINT('',(-3.425,-0.225,0.85));+#3103=ORIENTED_EDGE('',*,*,#3104,.T.);+#3104=EDGE_CURVE('',#3101,#3105,#832,.T.);+#3105=VERTEX_POINT('',#3106);+#3106=CARTESIAN_POINT('',(-3.425,0.225,0.85));+#3107=ORIENTED_EDGE('',*,*,#3108,.T.);+#3108=EDGE_CURVE('',#3105,#3109,#832,.T.);+#3109=VERTEX_POINT('',#3110);+#3110=CARTESIAN_POINT('',(-3.425,0.575,0.85));+#3111=ORIENTED_EDGE('',*,*,#3112,.T.);+#3112=EDGE_CURVE('',#3109,#3113,#832,.T.);+#3113=VERTEX_POINT('',#3114);+#3114=CARTESIAN_POINT('',(-3.425,1.025,0.85));+#3115=ORIENTED_EDGE('',*,*,#3116,.T.);+#3116=EDGE_CURVE('',#3113,#3117,#832,.T.);+#3117=VERTEX_POINT('',#3118);+#3118=CARTESIAN_POINT('',(-3.425,1.375,0.85));+#3119=ORIENTED_EDGE('',*,*,#3120,.T.);+#3120=EDGE_CURVE('',#3117,#3121,#832,.T.);+#3121=VERTEX_POINT('',#3122);+#3122=CARTESIAN_POINT('',(-3.425,1.825,0.85));+#3123=ORIENTED_EDGE('',*,*,#3124,.T.);+#3124=EDGE_CURVE('',#3121,#3125,#832,.T.);+#3125=VERTEX_POINT('',#3126);+#3126=CARTESIAN_POINT('',(-3.425,2.175,0.85));+#3127=ORIENTED_EDGE('',*,*,#3128,.T.);+#3128=EDGE_CURVE('',#3125,#3060,#832,.T.);+#3129=ORIENTED_EDGE('',*,*,#3059,.T.);+#3130=ORIENTED_EDGE('',*,*,#829,.T.);+#3131=ORIENTED_EDGE('',*,*,#3132,.T.);+#3132=EDGE_CURVE('',#825,#3133,#3135,.T.);+#3133=VERTEX_POINT('',#3134);+#3134=CARTESIAN_POINT('',(-3.286838234914,3.218419117457,1.5));+#3135=B_SPLINE_CURVE_WITH_KNOTS('',1,(#826,#3134),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3136=ORIENTED_EDGE('',*,*,#3137,.F.);+#3137=EDGE_CURVE('',#3138,#3133,#3140,.T.);+#3138=VERTEX_POINT('',#3139);+#3139=CARTESIAN_POINT('',(-3.286838234914,-3.218419117457,1.5));+#3140=LINE('',#3139,#150);+#3141=ORIENTED_EDGE('',*,*,#3142,.F.);+#3142=EDGE_CURVE('',#3072,#3138,#3143,.T.);+#3143=B_SPLINE_CURVE_WITH_KNOTS('',1,(#833,#3139),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3144=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#833,#3139),(#826,#3134)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3145=ADVANCED_FACE('',(#3146),#3158,.F.);+#3146=FACE_BOUND('',#3147,.F.);+#3147=EDGE_LOOP('',(#3148,#3149,#3154,#3157));+#3148=ORIENTED_EDGE('',*,*,#824,.T.);+#3149=ORIENTED_EDGE('',*,*,#3150,.T.);+#3150=EDGE_CURVE('',#820,#3151,#3153,.T.);+#3151=VERTEX_POINT('',#3152);+#3152=CARTESIAN_POINT('',(-3.218419117457,3.286838234914,1.5));+#3153=B_SPLINE_CURVE_WITH_KNOTS('',1,(#821,#3152),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3154=ORIENTED_EDGE('',*,*,#3155,.F.);+#3155=EDGE_CURVE('',#3133,#3151,#3156,.T.);+#3156=LINE('',#3134,#155);+#3157=ORIENTED_EDGE('',*,*,#3132,.F.);+#3158=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#826,#3134),(#821,#3152)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3159=ADVANCED_FACE('',(#3160),#3196,.F.);+#3160=FACE_BOUND('',#3161,.F.);+#3161=EDGE_LOOP('',(#3162,#3163,#3165,#3166,#3168,#3169,#3171,#3172,#3174,#3175,#3177,#3178,#3180,#3181,#3183,#3184,#3186,#3187,#3192,#3195));+#3162=ORIENTED_EDGE('',*,*,#819,.T.);+#3163=ORIENTED_EDGE('',*,*,#3164,.T.);+#3164=EDGE_CURVE('',#812,#995,#822,.T.);+#3165=ORIENTED_EDGE('',*,*,#1005,.T.);+#3166=ORIENTED_EDGE('',*,*,#3167,.T.);+#3167=EDGE_CURVE('',#1000,#1140,#822,.T.);+#3168=ORIENTED_EDGE('',*,*,#1150,.T.);+#3169=ORIENTED_EDGE('',*,*,#3170,.T.);+#3170=EDGE_CURVE('',#1145,#1285,#822,.T.);+#3171=ORIENTED_EDGE('',*,*,#1295,.T.);+#3172=ORIENTED_EDGE('',*,*,#3173,.T.);+#3173=EDGE_CURVE('',#1290,#1430,#822,.T.);+#3174=ORIENTED_EDGE('',*,*,#1440,.T.);+#3175=ORIENTED_EDGE('',*,*,#3176,.T.);+#3176=EDGE_CURVE('',#1435,#1575,#822,.T.);+#3177=ORIENTED_EDGE('',*,*,#1585,.T.);+#3178=ORIENTED_EDGE('',*,*,#3179,.T.);+#3179=EDGE_CURVE('',#1580,#1720,#822,.T.);+#3180=ORIENTED_EDGE('',*,*,#1730,.T.);+#3181=ORIENTED_EDGE('',*,*,#3182,.T.);+#3182=EDGE_CURVE('',#1725,#1865,#822,.T.);+#3183=ORIENTED_EDGE('',*,*,#1875,.T.);+#3184=ORIENTED_EDGE('',*,*,#3185,.T.);+#3185=EDGE_CURVE('',#1870,#2010,#822,.T.);+#3186=ORIENTED_EDGE('',*,*,#2036,.T.);+#3187=ORIENTED_EDGE('',*,*,#3188,.T.);+#3188=EDGE_CURVE('',#2032,#3189,#3191,.T.);+#3189=VERTEX_POINT('',#3190);+#3190=CARTESIAN_POINT('',(3.218419117457,3.286838234914,1.5));+#3191=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2033,#3190),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3192=ORIENTED_EDGE('',*,*,#3193,.F.);+#3193=EDGE_CURVE('',#3151,#3189,#3194,.T.);+#3194=LINE('',#3152,#27);+#3195=ORIENTED_EDGE('',*,*,#3150,.F.);+#3196=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#821,#3152),(#2033,#3190)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3197=ADVANCED_FACE('',(#3198),#3207,.F.);+#3198=FACE_BOUND('',#3199,.F.);+#3199=EDGE_LOOP('',(#3200,#3201,#984,#3204,#3205,#3206));+#3200=ORIENTED_EDGE('',*,*,#917,.F.);+#3201=ORIENTED_EDGE('',*,*,#3202,.T.);+#3202=EDGE_CURVE('',#912,#980,#3203,.T.);+#3203=LINE('',#815,#215);+#3204=ORIENTED_EDGE('',*,*,#994,.T.);+#3205=ORIENTED_EDGE('',*,*,#3164,.F.);+#3206=ORIENTED_EDGE('',*,*,#811,.F.);+#3207=PLANE('',#3208);+#3208=AXIS2_PLACEMENT_3D('',#815,#3066,#817);+#3209=ADVANCED_FACE('',(#3210),#3217,.T.);+#3210=FACE_BOUND('',#3211,.F.);+#3211=EDGE_LOOP('',(#3212,#978,#3215,#3216));+#3212=ORIENTED_EDGE('',*,*,#3213,.T.);+#3213=EDGE_CURVE('',#905,#975,#3214,.T.);+#3214=LINE('',#906,#215);+#3215=ORIENTED_EDGE('',*,*,#3202,.F.);+#3216=ORIENTED_EDGE('',*,*,#911,.F.);+#3217=CYLINDRICAL_SURFACE('',#3218,0.2);+#3218=AXIS2_PLACEMENT_3D('',#862,#863,#915);+#3219=ADVANCED_FACE('',(#3220),#3227,.F.);+#3220=FACE_BOUND('',#3221,.F.);+#3221=EDGE_LOOP('',(#3222,#973,#3225,#3226));+#3222=ORIENTED_EDGE('',*,*,#3223,.T.);+#3223=EDGE_CURVE('',#897,#969,#3224,.T.);+#3224=LINE('',#898,#215);+#3225=ORIENTED_EDGE('',*,*,#3213,.F.);+#3226=ORIENTED_EDGE('',*,*,#904,.F.);+#3227=PLANE('',#3228);+#3228=AXIS2_PLACEMENT_3D('',#898,#3229,#909);+#3229=DIRECTION('',(0.,-0.986322983713,-0.16482406317));+#3230=ADVANCED_FACE('',(#3231),#3238,.F.);+#3231=FACE_BOUND('',#3232,.F.);+#3232=EDGE_LOOP('',(#3233,#967,#3236,#3237));+#3233=ORIENTED_EDGE('',*,*,#3234,.T.);+#3234=EDGE_CURVE('',#892,#964,#3235,.T.);+#3235=LINE('',#893,#215);+#3236=ORIENTED_EDGE('',*,*,#3223,.F.);+#3237=ORIENTED_EDGE('',*,*,#896,.F.);+#3238=CYLINDRICAL_SURFACE('',#3239,1.E-01);+#3239=AXIS2_PLACEMENT_3D('',#878,#863,#902);+#3240=ADVANCED_FACE('',(#3241),#3248,.F.);+#3241=FACE_BOUND('',#3242,.F.);+#3242=EDGE_LOOP('',(#3243,#962,#3246,#3247));+#3243=ORIENTED_EDGE('',*,*,#3244,.T.);+#3244=EDGE_CURVE('',#887,#959,#3245,.T.);+#3245=LINE('',#888,#215);+#3246=ORIENTED_EDGE('',*,*,#3234,.F.);+#3247=ORIENTED_EDGE('',*,*,#891,.F.);+#3248=PLANE('',#3249);+#3249=AXIS2_PLACEMENT_3D('',#888,#3066,#817);+#3250=ADVANCED_FACE('',(#3251),#3258,.F.);+#3251=FACE_BOUND('',#3252,.F.);+#3252=EDGE_LOOP('',(#3253,#957,#3256,#3257));+#3253=ORIENTED_EDGE('',*,*,#3254,.T.);+#3254=EDGE_CURVE('',#882,#954,#3255,.T.);+#3255=LINE('',#883,#215);+#3256=ORIENTED_EDGE('',*,*,#3244,.F.);+#3257=ORIENTED_EDGE('',*,*,#886,.F.);+#3258=PLANE('',#3259);+#3259=AXIS2_PLACEMENT_3D('',#883,#817,#13);+#3260=ADVANCED_FACE('',(#3261),#3268,.F.);+#3261=FACE_BOUND('',#3262,.F.);+#3262=EDGE_LOOP('',(#3263,#952,#3266,#3267));+#3263=ORIENTED_EDGE('',*,*,#3264,.T.);+#3264=EDGE_CURVE('',#874,#947,#3265,.T.);+#3265=LINE('',#875,#215);+#3266=ORIENTED_EDGE('',*,*,#3254,.F.);+#3267=ORIENTED_EDGE('',*,*,#881,.F.);+#3268=PLANE('',#3269);+#3269=AXIS2_PLACEMENT_3D('',#875,#13,#204);+#3270=ADVANCED_FACE('',(#3271),#3278,.T.);+#3271=FACE_BOUND('',#3272,.F.);+#3272=EDGE_LOOP('',(#3273,#945,#3276,#3277));+#3273=ORIENTED_EDGE('',*,*,#3274,.T.);+#3274=EDGE_CURVE('',#867,#942,#3275,.T.);+#3275=LINE('',#868,#215);+#3276=ORIENTED_EDGE('',*,*,#3264,.F.);+#3277=ORIENTED_EDGE('',*,*,#873,.F.);+#3278=CYLINDRICAL_SURFACE('',#3279,0.2);+#3279=AXIS2_PLACEMENT_3D('',#878,#863,#879);+#3280=ADVANCED_FACE('',(#3281),#3286,.F.);+#3281=FACE_BOUND('',#3282,.F.);+#3282=EDGE_LOOP('',(#3283,#940,#3284,#3285));+#3283=ORIENTED_EDGE('',*,*,#933,.T.);+#3284=ORIENTED_EDGE('',*,*,#3274,.F.);+#3285=ORIENTED_EDGE('',*,*,#866,.F.);+#3286=PLANE('',#3287);+#3287=AXIS2_PLACEMENT_3D('',#859,#3288,#871);+#3288=DIRECTION('',(0.,0.986322983713,0.16482406317));+#3289=ADVANCED_FACE('',(#3290),#3299,.F.);+#3290=FACE_BOUND('',#3291,.F.);+#3291=EDGE_LOOP('',(#3292,#3293,#1129,#3296,#3297,#3298));+#3292=ORIENTED_EDGE('',*,*,#1062,.F.);+#3293=ORIENTED_EDGE('',*,*,#3294,.T.);+#3294=EDGE_CURVE('',#1058,#1125,#3295,.T.);+#3295=LINE('',#1003,#215);+#3296=ORIENTED_EDGE('',*,*,#1139,.T.);+#3297=ORIENTED_EDGE('',*,*,#3167,.F.);+#3298=ORIENTED_EDGE('',*,*,#999,.F.);+#3299=PLANE('',#3300);+#3300=AXIS2_PLACEMENT_3D('',#1003,#3066,#817);+#3301=ADVANCED_FACE('',(#3302),#3309,.T.);+#3302=FACE_BOUND('',#3303,.F.);+#3303=EDGE_LOOP('',(#3304,#1123,#3307,#3308));+#3304=ORIENTED_EDGE('',*,*,#3305,.T.);+#3305=EDGE_CURVE('',#1053,#1120,#3306,.T.);+#3306=LINE('',#1054,#215);+#3307=ORIENTED_EDGE('',*,*,#3294,.F.);+#3308=ORIENTED_EDGE('',*,*,#1057,.F.);+#3309=CYLINDRICAL_SURFACE('',#3310,0.2);+#3310=AXIS2_PLACEMENT_3D('',#1017,#863,#915);+#3311=ADVANCED_FACE('',(#3312),#3319,.F.);+#3312=FACE_BOUND('',#3313,.F.);+#3313=EDGE_LOOP('',(#3314,#1118,#3317,#3318));+#3314=ORIENTED_EDGE('',*,*,#3315,.T.);+#3315=EDGE_CURVE('',#1047,#1114,#3316,.T.);+#3316=LINE('',#1048,#215);+#3317=ORIENTED_EDGE('',*,*,#3305,.F.);+#3318=ORIENTED_EDGE('',*,*,#1052,.F.);+#3319=PLANE('',#3320);+#3320=AXIS2_PLACEMENT_3D('',#1048,#3229,#909);+#3321=ADVANCED_FACE('',(#3322),#3329,.F.);+#3322=FACE_BOUND('',#3323,.F.);+#3323=EDGE_LOOP('',(#3324,#1112,#3327,#3328));+#3324=ORIENTED_EDGE('',*,*,#3325,.T.);+#3325=EDGE_CURVE('',#1042,#1109,#3326,.T.);+#3326=LINE('',#1043,#215);+#3327=ORIENTED_EDGE('',*,*,#3315,.F.);+#3328=ORIENTED_EDGE('',*,*,#1046,.F.);+#3329=CYLINDRICAL_SURFACE('',#3330,1.E-01);+#3330=AXIS2_PLACEMENT_3D('',#1029,#863,#902);+#3331=ADVANCED_FACE('',(#3332),#3339,.F.);+#3332=FACE_BOUND('',#3333,.F.);+#3333=EDGE_LOOP('',(#3334,#1107,#3337,#3338));+#3334=ORIENTED_EDGE('',*,*,#3335,.T.);+#3335=EDGE_CURVE('',#1037,#1104,#3336,.T.);+#3336=LINE('',#1038,#215);+#3337=ORIENTED_EDGE('',*,*,#3325,.F.);+#3338=ORIENTED_EDGE('',*,*,#1041,.F.);+#3339=PLANE('',#3340);+#3340=AXIS2_PLACEMENT_3D('',#1038,#3066,#817);+#3341=ADVANCED_FACE('',(#3342),#3349,.F.);+#3342=FACE_BOUND('',#3343,.F.);+#3343=EDGE_LOOP('',(#3344,#1102,#3347,#3348));+#3344=ORIENTED_EDGE('',*,*,#3345,.T.);+#3345=EDGE_CURVE('',#1032,#1099,#3346,.T.);+#3346=LINE('',#1033,#215);+#3347=ORIENTED_EDGE('',*,*,#3335,.F.);+#3348=ORIENTED_EDGE('',*,*,#1036,.F.);+#3349=PLANE('',#3350);+#3350=AXIS2_PLACEMENT_3D('',#1033,#817,#13);+#3351=ADVANCED_FACE('',(#3352),#3359,.F.);+#3352=FACE_BOUND('',#3353,.F.);+#3353=EDGE_LOOP('',(#3354,#1097,#3357,#3358));+#3354=ORIENTED_EDGE('',*,*,#3355,.T.);+#3355=EDGE_CURVE('',#1025,#1092,#3356,.T.);+#3356=LINE('',#1026,#215);+#3357=ORIENTED_EDGE('',*,*,#3345,.F.);+#3358=ORIENTED_EDGE('',*,*,#1031,.F.);+#3359=PLANE('',#3360);+#3360=AXIS2_PLACEMENT_3D('',#1026,#13,#204);+#3361=ADVANCED_FACE('',(#3362),#3369,.T.);+#3362=FACE_BOUND('',#3363,.F.);+#3363=EDGE_LOOP('',(#3364,#1090,#3367,#3368));+#3364=ORIENTED_EDGE('',*,*,#3365,.T.);+#3365=EDGE_CURVE('',#1020,#1087,#3366,.T.);+#3366=LINE('',#1021,#215);+#3367=ORIENTED_EDGE('',*,*,#3355,.F.);+#3368=ORIENTED_EDGE('',*,*,#1024,.F.);+#3369=CYLINDRICAL_SURFACE('',#3370,0.2);+#3370=AXIS2_PLACEMENT_3D('',#1029,#863,#879);+#3371=ADVANCED_FACE('',(#3372),#3377,.F.);+#3372=FACE_BOUND('',#3373,.F.);+#3373=EDGE_LOOP('',(#3374,#1085,#3375,#3376));+#3374=ORIENTED_EDGE('',*,*,#1078,.T.);+#3375=ORIENTED_EDGE('',*,*,#3365,.F.);+#3376=ORIENTED_EDGE('',*,*,#1019,.F.);+#3377=PLANE('',#3378);+#3378=AXIS2_PLACEMENT_3D('',#1014,#3288,#871);+#3379=ADVANCED_FACE('',(#3380),#3389,.F.);+#3380=FACE_BOUND('',#3381,.F.);+#3381=EDGE_LOOP('',(#3382,#3383,#1274,#3386,#3387,#3388));+#3382=ORIENTED_EDGE('',*,*,#1207,.F.);+#3383=ORIENTED_EDGE('',*,*,#3384,.T.);+#3384=EDGE_CURVE('',#1203,#1270,#3385,.T.);+#3385=LINE('',#1148,#215);+#3386=ORIENTED_EDGE('',*,*,#1284,.T.);+#3387=ORIENTED_EDGE('',*,*,#3170,.F.);+#3388=ORIENTED_EDGE('',*,*,#1144,.F.);+#3389=PLANE('',#3390);+#3390=AXIS2_PLACEMENT_3D('',#1148,#3066,#817);+#3391=ADVANCED_FACE('',(#3392),#3399,.T.);+#3392=FACE_BOUND('',#3393,.F.);+#3393=EDGE_LOOP('',(#3394,#1268,#3397,#3398));+#3394=ORIENTED_EDGE('',*,*,#3395,.T.);+#3395=EDGE_CURVE('',#1198,#1265,#3396,.T.);+#3396=LINE('',#1199,#215);+#3397=ORIENTED_EDGE('',*,*,#3384,.F.);+#3398=ORIENTED_EDGE('',*,*,#1202,.F.);+#3399=CYLINDRICAL_SURFACE('',#3400,0.2);+#3400=AXIS2_PLACEMENT_3D('',#1162,#863,#915);+#3401=ADVANCED_FACE('',(#3402),#3409,.F.);+#3402=FACE_BOUND('',#3403,.F.);+#3403=EDGE_LOOP('',(#3404,#1263,#3407,#3408));+#3404=ORIENTED_EDGE('',*,*,#3405,.T.);+#3405=EDGE_CURVE('',#1192,#1259,#3406,.T.);+#3406=LINE('',#1193,#215);+#3407=ORIENTED_EDGE('',*,*,#3395,.F.);+#3408=ORIENTED_EDGE('',*,*,#1197,.F.);+#3409=PLANE('',#3410);+#3410=AXIS2_PLACEMENT_3D('',#1193,#3229,#909);+#3411=ADVANCED_FACE('',(#3412),#3419,.F.);+#3412=FACE_BOUND('',#3413,.F.);+#3413=EDGE_LOOP('',(#3414,#1257,#3417,#3418));+#3414=ORIENTED_EDGE('',*,*,#3415,.T.);+#3415=EDGE_CURVE('',#1187,#1254,#3416,.T.);+#3416=LINE('',#1188,#215);+#3417=ORIENTED_EDGE('',*,*,#3405,.F.);+#3418=ORIENTED_EDGE('',*,*,#1191,.F.);+#3419=CYLINDRICAL_SURFACE('',#3420,1.E-01);+#3420=AXIS2_PLACEMENT_3D('',#1174,#863,#902);+#3421=ADVANCED_FACE('',(#3422),#3429,.F.);+#3422=FACE_BOUND('',#3423,.F.);+#3423=EDGE_LOOP('',(#3424,#1252,#3427,#3428));+#3424=ORIENTED_EDGE('',*,*,#3425,.T.);+#3425=EDGE_CURVE('',#1182,#1249,#3426,.T.);+#3426=LINE('',#1183,#215);+#3427=ORIENTED_EDGE('',*,*,#3415,.F.);+#3428=ORIENTED_EDGE('',*,*,#1186,.F.);+#3429=PLANE('',#3430);+#3430=AXIS2_PLACEMENT_3D('',#1183,#3066,#817);+#3431=ADVANCED_FACE('',(#3432),#3439,.F.);+#3432=FACE_BOUND('',#3433,.F.);+#3433=EDGE_LOOP('',(#3434,#1247,#3437,#3438));+#3434=ORIENTED_EDGE('',*,*,#3435,.T.);+#3435=EDGE_CURVE('',#1177,#1244,#3436,.T.);+#3436=LINE('',#1178,#215);+#3437=ORIENTED_EDGE('',*,*,#3425,.F.);+#3438=ORIENTED_EDGE('',*,*,#1181,.F.);+#3439=PLANE('',#3440);+#3440=AXIS2_PLACEMENT_3D('',#1178,#817,#13);+#3441=ADVANCED_FACE('',(#3442),#3449,.F.);+#3442=FACE_BOUND('',#3443,.F.);+#3443=EDGE_LOOP('',(#3444,#1242,#3447,#3448));+#3444=ORIENTED_EDGE('',*,*,#3445,.T.);+#3445=EDGE_CURVE('',#1170,#1237,#3446,.T.);+#3446=LINE('',#1171,#215);+#3447=ORIENTED_EDGE('',*,*,#3435,.F.);+#3448=ORIENTED_EDGE('',*,*,#1176,.F.);+#3449=PLANE('',#3450);+#3450=AXIS2_PLACEMENT_3D('',#1171,#13,#204);+#3451=ADVANCED_FACE('',(#3452),#3459,.T.);+#3452=FACE_BOUND('',#3453,.F.);+#3453=EDGE_LOOP('',(#3454,#1235,#3457,#3458));+#3454=ORIENTED_EDGE('',*,*,#3455,.T.);+#3455=EDGE_CURVE('',#1165,#1232,#3456,.T.);+#3456=LINE('',#1166,#215);+#3457=ORIENTED_EDGE('',*,*,#3445,.F.);+#3458=ORIENTED_EDGE('',*,*,#1169,.F.);+#3459=CYLINDRICAL_SURFACE('',#3460,0.2);+#3460=AXIS2_PLACEMENT_3D('',#1174,#863,#879);+#3461=ADVANCED_FACE('',(#3462),#3467,.F.);+#3462=FACE_BOUND('',#3463,.F.);+#3463=EDGE_LOOP('',(#3464,#1230,#3465,#3466));+#3464=ORIENTED_EDGE('',*,*,#1223,.T.);+#3465=ORIENTED_EDGE('',*,*,#3455,.F.);+#3466=ORIENTED_EDGE('',*,*,#1164,.F.);+#3467=PLANE('',#3468);+#3468=AXIS2_PLACEMENT_3D('',#1159,#3288,#871);+#3469=ADVANCED_FACE('',(#3470),#3479,.F.);+#3470=FACE_BOUND('',#3471,.F.);+#3471=EDGE_LOOP('',(#3472,#3473,#1419,#3476,#3477,#3478));+#3472=ORIENTED_EDGE('',*,*,#1352,.F.);+#3473=ORIENTED_EDGE('',*,*,#3474,.T.);+#3474=EDGE_CURVE('',#1348,#1415,#3475,.T.);+#3475=LINE('',#1293,#215);+#3476=ORIENTED_EDGE('',*,*,#1429,.T.);+#3477=ORIENTED_EDGE('',*,*,#3173,.F.);+#3478=ORIENTED_EDGE('',*,*,#1289,.F.);+#3479=PLANE('',#3480);+#3480=AXIS2_PLACEMENT_3D('',#1293,#3066,#817);+#3481=ADVANCED_FACE('',(#3482),#3489,.T.);+#3482=FACE_BOUND('',#3483,.F.);+#3483=EDGE_LOOP('',(#3484,#1413,#3487,#3488));+#3484=ORIENTED_EDGE('',*,*,#3485,.T.);+#3485=EDGE_CURVE('',#1343,#1410,#3486,.T.);+#3486=LINE('',#1344,#215);+#3487=ORIENTED_EDGE('',*,*,#3474,.F.);+#3488=ORIENTED_EDGE('',*,*,#1347,.F.);+#3489=CYLINDRICAL_SURFACE('',#3490,0.2);+#3490=AXIS2_PLACEMENT_3D('',#1307,#863,#915);+#3491=ADVANCED_FACE('',(#3492),#3499,.F.);+#3492=FACE_BOUND('',#3493,.F.);+#3493=EDGE_LOOP('',(#3494,#1408,#3497,#3498));+#3494=ORIENTED_EDGE('',*,*,#3495,.T.);+#3495=EDGE_CURVE('',#1337,#1404,#3496,.T.);+#3496=LINE('',#1338,#215);+#3497=ORIENTED_EDGE('',*,*,#3485,.F.);+#3498=ORIENTED_EDGE('',*,*,#1342,.F.);+#3499=PLANE('',#3500);+#3500=AXIS2_PLACEMENT_3D('',#1338,#3229,#909);+#3501=ADVANCED_FACE('',(#3502),#3509,.F.);+#3502=FACE_BOUND('',#3503,.F.);+#3503=EDGE_LOOP('',(#3504,#1402,#3507,#3508));+#3504=ORIENTED_EDGE('',*,*,#3505,.T.);+#3505=EDGE_CURVE('',#1332,#1399,#3506,.T.);+#3506=LINE('',#1333,#215);+#3507=ORIENTED_EDGE('',*,*,#3495,.F.);+#3508=ORIENTED_EDGE('',*,*,#1336,.F.);+#3509=CYLINDRICAL_SURFACE('',#3510,1.E-01);+#3510=AXIS2_PLACEMENT_3D('',#1319,#863,#902);+#3511=ADVANCED_FACE('',(#3512),#3519,.F.);+#3512=FACE_BOUND('',#3513,.F.);+#3513=EDGE_LOOP('',(#3514,#1397,#3517,#3518));+#3514=ORIENTED_EDGE('',*,*,#3515,.T.);+#3515=EDGE_CURVE('',#1327,#1394,#3516,.T.);+#3516=LINE('',#1328,#215);+#3517=ORIENTED_EDGE('',*,*,#3505,.F.);+#3518=ORIENTED_EDGE('',*,*,#1331,.F.);+#3519=PLANE('',#3520);+#3520=AXIS2_PLACEMENT_3D('',#1328,#3066,#817);+#3521=ADVANCED_FACE('',(#3522),#3529,.F.);+#3522=FACE_BOUND('',#3523,.F.);+#3523=EDGE_LOOP('',(#3524,#1392,#3527,#3528));+#3524=ORIENTED_EDGE('',*,*,#3525,.T.);+#3525=EDGE_CURVE('',#1322,#1389,#3526,.T.);+#3526=LINE('',#1323,#215);+#3527=ORIENTED_EDGE('',*,*,#3515,.F.);+#3528=ORIENTED_EDGE('',*,*,#1326,.F.);+#3529=PLANE('',#3530);+#3530=AXIS2_PLACEMENT_3D('',#1323,#817,#13);+#3531=ADVANCED_FACE('',(#3532),#3539,.F.);+#3532=FACE_BOUND('',#3533,.F.);+#3533=EDGE_LOOP('',(#3534,#1387,#3537,#3538));+#3534=ORIENTED_EDGE('',*,*,#3535,.T.);+#3535=EDGE_CURVE('',#1315,#1382,#3536,.T.);+#3536=LINE('',#1316,#215);+#3537=ORIENTED_EDGE('',*,*,#3525,.F.);+#3538=ORIENTED_EDGE('',*,*,#1321,.F.);+#3539=PLANE('',#3540);+#3540=AXIS2_PLACEMENT_3D('',#1316,#13,#204);+#3541=ADVANCED_FACE('',(#3542),#3549,.T.);+#3542=FACE_BOUND('',#3543,.F.);+#3543=EDGE_LOOP('',(#3544,#1380,#3547,#3548));+#3544=ORIENTED_EDGE('',*,*,#3545,.T.);+#3545=EDGE_CURVE('',#1310,#1377,#3546,.T.);+#3546=LINE('',#1311,#215);+#3547=ORIENTED_EDGE('',*,*,#3535,.F.);+#3548=ORIENTED_EDGE('',*,*,#1314,.F.);+#3549=CYLINDRICAL_SURFACE('',#3550,0.2);+#3550=AXIS2_PLACEMENT_3D('',#1319,#863,#879);+#3551=ADVANCED_FACE('',(#3552),#3557,.F.);+#3552=FACE_BOUND('',#3553,.F.);+#3553=EDGE_LOOP('',(#3554,#1375,#3555,#3556));+#3554=ORIENTED_EDGE('',*,*,#1368,.T.);+#3555=ORIENTED_EDGE('',*,*,#3545,.F.);+#3556=ORIENTED_EDGE('',*,*,#1309,.F.);+#3557=PLANE('',#3558);+#3558=AXIS2_PLACEMENT_3D('',#1304,#3288,#871);+#3559=ADVANCED_FACE('',(#3560),#3569,.F.);+#3560=FACE_BOUND('',#3561,.F.);+#3561=EDGE_LOOP('',(#3562,#3563,#1564,#3566,#3567,#3568));+#3562=ORIENTED_EDGE('',*,*,#1497,.F.);+#3563=ORIENTED_EDGE('',*,*,#3564,.T.);+#3564=EDGE_CURVE('',#1493,#1560,#3565,.T.);+#3565=LINE('',#1438,#215);+#3566=ORIENTED_EDGE('',*,*,#1574,.T.);+#3567=ORIENTED_EDGE('',*,*,#3176,.F.);+#3568=ORIENTED_EDGE('',*,*,#1434,.F.);+#3569=PLANE('',#3570);+#3570=AXIS2_PLACEMENT_3D('',#1438,#3066,#817);+#3571=ADVANCED_FACE('',(#3572),#3579,.T.);+#3572=FACE_BOUND('',#3573,.F.);+#3573=EDGE_LOOP('',(#3574,#1558,#3577,#3578));+#3574=ORIENTED_EDGE('',*,*,#3575,.T.);+#3575=EDGE_CURVE('',#1488,#1555,#3576,.T.);+#3576=LINE('',#1489,#215);+#3577=ORIENTED_EDGE('',*,*,#3564,.F.);+#3578=ORIENTED_EDGE('',*,*,#1492,.F.);+#3579=CYLINDRICAL_SURFACE('',#3580,0.2);+#3580=AXIS2_PLACEMENT_3D('',#1452,#863,#915);+#3581=ADVANCED_FACE('',(#3582),#3589,.F.);+#3582=FACE_BOUND('',#3583,.F.);+#3583=EDGE_LOOP('',(#3584,#1553,#3587,#3588));+#3584=ORIENTED_EDGE('',*,*,#3585,.T.);+#3585=EDGE_CURVE('',#1482,#1549,#3586,.T.);+#3586=LINE('',#1483,#215);+#3587=ORIENTED_EDGE('',*,*,#3575,.F.);+#3588=ORIENTED_EDGE('',*,*,#1487,.F.);+#3589=PLANE('',#3590);+#3590=AXIS2_PLACEMENT_3D('',#1483,#3229,#909);+#3591=ADVANCED_FACE('',(#3592),#3599,.F.);+#3592=FACE_BOUND('',#3593,.F.);+#3593=EDGE_LOOP('',(#3594,#1547,#3597,#3598));+#3594=ORIENTED_EDGE('',*,*,#3595,.T.);+#3595=EDGE_CURVE('',#1477,#1544,#3596,.T.);+#3596=LINE('',#1478,#215);+#3597=ORIENTED_EDGE('',*,*,#3585,.F.);+#3598=ORIENTED_EDGE('',*,*,#1481,.F.);+#3599=CYLINDRICAL_SURFACE('',#3600,1.E-01);+#3600=AXIS2_PLACEMENT_3D('',#1464,#863,#902);+#3601=ADVANCED_FACE('',(#3602),#3609,.F.);+#3602=FACE_BOUND('',#3603,.F.);+#3603=EDGE_LOOP('',(#3604,#1542,#3607,#3608));+#3604=ORIENTED_EDGE('',*,*,#3605,.T.);+#3605=EDGE_CURVE('',#1472,#1539,#3606,.T.);+#3606=LINE('',#1473,#215);+#3607=ORIENTED_EDGE('',*,*,#3595,.F.);+#3608=ORIENTED_EDGE('',*,*,#1476,.F.);+#3609=PLANE('',#3610);+#3610=AXIS2_PLACEMENT_3D('',#1473,#3066,#817);+#3611=ADVANCED_FACE('',(#3612),#3619,.F.);+#3612=FACE_BOUND('',#3613,.F.);+#3613=EDGE_LOOP('',(#3614,#1537,#3617,#3618));+#3614=ORIENTED_EDGE('',*,*,#3615,.T.);+#3615=EDGE_CURVE('',#1467,#1534,#3616,.T.);+#3616=LINE('',#1468,#215);+#3617=ORIENTED_EDGE('',*,*,#3605,.F.);+#3618=ORIENTED_EDGE('',*,*,#1471,.F.);+#3619=PLANE('',#3620);+#3620=AXIS2_PLACEMENT_3D('',#1468,#817,#13);+#3621=ADVANCED_FACE('',(#3622),#3629,.F.);+#3622=FACE_BOUND('',#3623,.F.);+#3623=EDGE_LOOP('',(#3624,#1532,#3627,#3628));+#3624=ORIENTED_EDGE('',*,*,#3625,.T.);+#3625=EDGE_CURVE('',#1460,#1527,#3626,.T.);+#3626=LINE('',#1461,#215);+#3627=ORIENTED_EDGE('',*,*,#3615,.F.);+#3628=ORIENTED_EDGE('',*,*,#1466,.F.);+#3629=PLANE('',#3630);+#3630=AXIS2_PLACEMENT_3D('',#1461,#13,#204);+#3631=ADVANCED_FACE('',(#3632),#3639,.T.);+#3632=FACE_BOUND('',#3633,.F.);+#3633=EDGE_LOOP('',(#3634,#1525,#3637,#3638));+#3634=ORIENTED_EDGE('',*,*,#3635,.T.);+#3635=EDGE_CURVE('',#1455,#1522,#3636,.T.);+#3636=LINE('',#1456,#215);+#3637=ORIENTED_EDGE('',*,*,#3625,.F.);+#3638=ORIENTED_EDGE('',*,*,#1459,.F.);+#3639=CYLINDRICAL_SURFACE('',#3640,0.2);+#3640=AXIS2_PLACEMENT_3D('',#1464,#863,#879);+#3641=ADVANCED_FACE('',(#3642),#3647,.F.);+#3642=FACE_BOUND('',#3643,.F.);+#3643=EDGE_LOOP('',(#3644,#1520,#3645,#3646));+#3644=ORIENTED_EDGE('',*,*,#1513,.T.);+#3645=ORIENTED_EDGE('',*,*,#3635,.F.);+#3646=ORIENTED_EDGE('',*,*,#1454,.F.);+#3647=PLANE('',#3648);+#3648=AXIS2_PLACEMENT_3D('',#1449,#3288,#871);+#3649=ADVANCED_FACE('',(#3650),#3659,.F.);+#3650=FACE_BOUND('',#3651,.F.);+#3651=EDGE_LOOP('',(#3652,#3653,#1709,#3656,#3657,#3658));+#3652=ORIENTED_EDGE('',*,*,#1642,.F.);+#3653=ORIENTED_EDGE('',*,*,#3654,.T.);+#3654=EDGE_CURVE('',#1638,#1705,#3655,.T.);+#3655=LINE('',#1583,#215);+#3656=ORIENTED_EDGE('',*,*,#1719,.T.);+#3657=ORIENTED_EDGE('',*,*,#3179,.F.);+#3658=ORIENTED_EDGE('',*,*,#1579,.F.);+#3659=PLANE('',#3660);+#3660=AXIS2_PLACEMENT_3D('',#1583,#3066,#817);+#3661=ADVANCED_FACE('',(#3662),#3669,.T.);+#3662=FACE_BOUND('',#3663,.F.);+#3663=EDGE_LOOP('',(#3664,#1703,#3667,#3668));+#3664=ORIENTED_EDGE('',*,*,#3665,.T.);+#3665=EDGE_CURVE('',#1633,#1700,#3666,.T.);+#3666=LINE('',#1634,#215);+#3667=ORIENTED_EDGE('',*,*,#3654,.F.);+#3668=ORIENTED_EDGE('',*,*,#1637,.F.);+#3669=CYLINDRICAL_SURFACE('',#3670,0.2);+#3670=AXIS2_PLACEMENT_3D('',#1597,#863,#915);+#3671=ADVANCED_FACE('',(#3672),#3679,.F.);+#3672=FACE_BOUND('',#3673,.F.);+#3673=EDGE_LOOP('',(#3674,#1698,#3677,#3678));+#3674=ORIENTED_EDGE('',*,*,#3675,.T.);+#3675=EDGE_CURVE('',#1627,#1694,#3676,.T.);+#3676=LINE('',#1628,#215);+#3677=ORIENTED_EDGE('',*,*,#3665,.F.);+#3678=ORIENTED_EDGE('',*,*,#1632,.F.);+#3679=PLANE('',#3680);+#3680=AXIS2_PLACEMENT_3D('',#1628,#3229,#909);+#3681=ADVANCED_FACE('',(#3682),#3689,.F.);+#3682=FACE_BOUND('',#3683,.F.);+#3683=EDGE_LOOP('',(#3684,#1692,#3687,#3688));+#3684=ORIENTED_EDGE('',*,*,#3685,.T.);+#3685=EDGE_CURVE('',#1622,#1689,#3686,.T.);+#3686=LINE('',#1623,#215);+#3687=ORIENTED_EDGE('',*,*,#3675,.F.);+#3688=ORIENTED_EDGE('',*,*,#1626,.F.);+#3689=CYLINDRICAL_SURFACE('',#3690,1.E-01);+#3690=AXIS2_PLACEMENT_3D('',#1609,#863,#902);+#3691=ADVANCED_FACE('',(#3692),#3699,.F.);+#3692=FACE_BOUND('',#3693,.F.);+#3693=EDGE_LOOP('',(#3694,#1687,#3697,#3698));+#3694=ORIENTED_EDGE('',*,*,#3695,.T.);+#3695=EDGE_CURVE('',#1617,#1684,#3696,.T.);+#3696=LINE('',#1618,#215);+#3697=ORIENTED_EDGE('',*,*,#3685,.F.);+#3698=ORIENTED_EDGE('',*,*,#1621,.F.);+#3699=PLANE('',#3700);+#3700=AXIS2_PLACEMENT_3D('',#1618,#3066,#817);+#3701=ADVANCED_FACE('',(#3702),#3709,.F.);+#3702=FACE_BOUND('',#3703,.F.);+#3703=EDGE_LOOP('',(#3704,#1682,#3707,#3708));+#3704=ORIENTED_EDGE('',*,*,#3705,.T.);+#3705=EDGE_CURVE('',#1612,#1679,#3706,.T.);+#3706=LINE('',#1613,#215);+#3707=ORIENTED_EDGE('',*,*,#3695,.F.);+#3708=ORIENTED_EDGE('',*,*,#1616,.F.);+#3709=PLANE('',#3710);+#3710=AXIS2_PLACEMENT_3D('',#1613,#817,#13);+#3711=ADVANCED_FACE('',(#3712),#3719,.F.);+#3712=FACE_BOUND('',#3713,.F.);+#3713=EDGE_LOOP('',(#3714,#1677,#3717,#3718));+#3714=ORIENTED_EDGE('',*,*,#3715,.T.);+#3715=EDGE_CURVE('',#1605,#1672,#3716,.T.);+#3716=LINE('',#1606,#215);+#3717=ORIENTED_EDGE('',*,*,#3705,.F.);+#3718=ORIENTED_EDGE('',*,*,#1611,.F.);+#3719=PLANE('',#3720);+#3720=AXIS2_PLACEMENT_3D('',#1606,#13,#204);+#3721=ADVANCED_FACE('',(#3722),#3729,.T.);+#3722=FACE_BOUND('',#3723,.F.);+#3723=EDGE_LOOP('',(#3724,#1670,#3727,#3728));+#3724=ORIENTED_EDGE('',*,*,#3725,.T.);+#3725=EDGE_CURVE('',#1600,#1667,#3726,.T.);+#3726=LINE('',#1601,#215);+#3727=ORIENTED_EDGE('',*,*,#3715,.F.);+#3728=ORIENTED_EDGE('',*,*,#1604,.F.);+#3729=CYLINDRICAL_SURFACE('',#3730,0.2);+#3730=AXIS2_PLACEMENT_3D('',#1609,#863,#879);+#3731=ADVANCED_FACE('',(#3732),#3737,.F.);+#3732=FACE_BOUND('',#3733,.F.);+#3733=EDGE_LOOP('',(#3734,#1665,#3735,#3736));+#3734=ORIENTED_EDGE('',*,*,#1658,.T.);+#3735=ORIENTED_EDGE('',*,*,#3725,.F.);+#3736=ORIENTED_EDGE('',*,*,#1599,.F.);+#3737=PLANE('',#3738);+#3738=AXIS2_PLACEMENT_3D('',#1594,#3288,#871);+#3739=ADVANCED_FACE('',(#3740),#3749,.F.);+#3740=FACE_BOUND('',#3741,.F.);+#3741=EDGE_LOOP('',(#3742,#3743,#1854,#3746,#3747,#3748));+#3742=ORIENTED_EDGE('',*,*,#1787,.F.);+#3743=ORIENTED_EDGE('',*,*,#3744,.T.);+#3744=EDGE_CURVE('',#1783,#1850,#3745,.T.);+#3745=LINE('',#1728,#215);+#3746=ORIENTED_EDGE('',*,*,#1864,.T.);+#3747=ORIENTED_EDGE('',*,*,#3182,.F.);+#3748=ORIENTED_EDGE('',*,*,#1724,.F.);+#3749=PLANE('',#3750);+#3750=AXIS2_PLACEMENT_3D('',#1728,#3066,#817);+#3751=ADVANCED_FACE('',(#3752),#3759,.T.);+#3752=FACE_BOUND('',#3753,.F.);+#3753=EDGE_LOOP('',(#3754,#1848,#3757,#3758));+#3754=ORIENTED_EDGE('',*,*,#3755,.T.);+#3755=EDGE_CURVE('',#1778,#1845,#3756,.T.);+#3756=LINE('',#1779,#215);+#3757=ORIENTED_EDGE('',*,*,#3744,.F.);+#3758=ORIENTED_EDGE('',*,*,#1782,.F.);+#3759=CYLINDRICAL_SURFACE('',#3760,0.2);+#3760=AXIS2_PLACEMENT_3D('',#1742,#863,#915);+#3761=ADVANCED_FACE('',(#3762),#3769,.F.);+#3762=FACE_BOUND('',#3763,.F.);+#3763=EDGE_LOOP('',(#3764,#1843,#3767,#3768));+#3764=ORIENTED_EDGE('',*,*,#3765,.T.);+#3765=EDGE_CURVE('',#1772,#1839,#3766,.T.);+#3766=LINE('',#1773,#215);+#3767=ORIENTED_EDGE('',*,*,#3755,.F.);+#3768=ORIENTED_EDGE('',*,*,#1777,.F.);+#3769=PLANE('',#3770);+#3770=AXIS2_PLACEMENT_3D('',#1773,#3229,#909);+#3771=ADVANCED_FACE('',(#3772),#3779,.F.);+#3772=FACE_BOUND('',#3773,.F.);+#3773=EDGE_LOOP('',(#3774,#1837,#3777,#3778));+#3774=ORIENTED_EDGE('',*,*,#3775,.T.);+#3775=EDGE_CURVE('',#1767,#1834,#3776,.T.);+#3776=LINE('',#1768,#215);+#3777=ORIENTED_EDGE('',*,*,#3765,.F.);+#3778=ORIENTED_EDGE('',*,*,#1771,.F.);+#3779=CYLINDRICAL_SURFACE('',#3780,1.E-01);+#3780=AXIS2_PLACEMENT_3D('',#1754,#863,#902);+#3781=ADVANCED_FACE('',(#3782),#3789,.F.);+#3782=FACE_BOUND('',#3783,.F.);+#3783=EDGE_LOOP('',(#3784,#1832,#3787,#3788));+#3784=ORIENTED_EDGE('',*,*,#3785,.T.);+#3785=EDGE_CURVE('',#1762,#1829,#3786,.T.);+#3786=LINE('',#1763,#215);+#3787=ORIENTED_EDGE('',*,*,#3775,.F.);+#3788=ORIENTED_EDGE('',*,*,#1766,.F.);+#3789=PLANE('',#3790);+#3790=AXIS2_PLACEMENT_3D('',#1763,#3066,#817);+#3791=ADVANCED_FACE('',(#3792),#3799,.F.);+#3792=FACE_BOUND('',#3793,.F.);+#3793=EDGE_LOOP('',(#3794,#1827,#3797,#3798));+#3794=ORIENTED_EDGE('',*,*,#3795,.T.);+#3795=EDGE_CURVE('',#1757,#1824,#3796,.T.);+#3796=LINE('',#1758,#215);+#3797=ORIENTED_EDGE('',*,*,#3785,.F.);+#3798=ORIENTED_EDGE('',*,*,#1761,.F.);+#3799=PLANE('',#3800);+#3800=AXIS2_PLACEMENT_3D('',#1758,#817,#13);+#3801=ADVANCED_FACE('',(#3802),#3809,.F.);+#3802=FACE_BOUND('',#3803,.F.);+#3803=EDGE_LOOP('',(#3804,#1822,#3807,#3808));+#3804=ORIENTED_EDGE('',*,*,#3805,.T.);+#3805=EDGE_CURVE('',#1750,#1817,#3806,.T.);+#3806=LINE('',#1751,#215);+#3807=ORIENTED_EDGE('',*,*,#3795,.F.);+#3808=ORIENTED_EDGE('',*,*,#1756,.F.);+#3809=PLANE('',#3810);+#3810=AXIS2_PLACEMENT_3D('',#1751,#13,#204);+#3811=ADVANCED_FACE('',(#3812),#3819,.T.);+#3812=FACE_BOUND('',#3813,.F.);+#3813=EDGE_LOOP('',(#3814,#1815,#3817,#3818));+#3814=ORIENTED_EDGE('',*,*,#3815,.T.);+#3815=EDGE_CURVE('',#1745,#1812,#3816,.T.);+#3816=LINE('',#1746,#215);+#3817=ORIENTED_EDGE('',*,*,#3805,.F.);+#3818=ORIENTED_EDGE('',*,*,#1749,.F.);+#3819=CYLINDRICAL_SURFACE('',#3820,0.2);+#3820=AXIS2_PLACEMENT_3D('',#1754,#863,#879);+#3821=ADVANCED_FACE('',(#3822),#3827,.F.);+#3822=FACE_BOUND('',#3823,.F.);+#3823=EDGE_LOOP('',(#3824,#1810,#3825,#3826));+#3824=ORIENTED_EDGE('',*,*,#1803,.T.);+#3825=ORIENTED_EDGE('',*,*,#3815,.F.);+#3826=ORIENTED_EDGE('',*,*,#1744,.F.);+#3827=PLANE('',#3828);+#3828=AXIS2_PLACEMENT_3D('',#1739,#3288,#871);+#3829=ADVANCED_FACE('',(#3830),#3839,.F.);+#3830=FACE_BOUND('',#3831,.F.);+#3831=EDGE_LOOP('',(#3832,#3833,#1999,#3836,#3837,#3838));+#3832=ORIENTED_EDGE('',*,*,#1932,.F.);+#3833=ORIENTED_EDGE('',*,*,#3834,.T.);+#3834=EDGE_CURVE('',#1928,#1995,#3835,.T.);+#3835=LINE('',#1873,#215);+#3836=ORIENTED_EDGE('',*,*,#2009,.T.);+#3837=ORIENTED_EDGE('',*,*,#3185,.F.);+#3838=ORIENTED_EDGE('',*,*,#1869,.F.);+#3839=PLANE('',#3840);+#3840=AXIS2_PLACEMENT_3D('',#1873,#3066,#817);+#3841=ADVANCED_FACE('',(#3842),#3849,.T.);+#3842=FACE_BOUND('',#3843,.F.);+#3843=EDGE_LOOP('',(#3844,#1993,#3847,#3848));+#3844=ORIENTED_EDGE('',*,*,#3845,.T.);+#3845=EDGE_CURVE('',#1923,#1990,#3846,.T.);+#3846=LINE('',#1924,#215);+#3847=ORIENTED_EDGE('',*,*,#3834,.F.);+#3848=ORIENTED_EDGE('',*,*,#1927,.F.);+#3849=CYLINDRICAL_SURFACE('',#3850,0.2);+#3850=AXIS2_PLACEMENT_3D('',#1887,#863,#915);+#3851=ADVANCED_FACE('',(#3852),#3859,.F.);+#3852=FACE_BOUND('',#3853,.F.);+#3853=EDGE_LOOP('',(#3854,#1988,#3857,#3858));+#3854=ORIENTED_EDGE('',*,*,#3855,.T.);+#3855=EDGE_CURVE('',#1917,#1984,#3856,.T.);+#3856=LINE('',#1918,#215);+#3857=ORIENTED_EDGE('',*,*,#3845,.F.);+#3858=ORIENTED_EDGE('',*,*,#1922,.F.);+#3859=PLANE('',#3860);+#3860=AXIS2_PLACEMENT_3D('',#1918,#3229,#909);+#3861=ADVANCED_FACE('',(#3862),#3869,.F.);+#3862=FACE_BOUND('',#3863,.F.);+#3863=EDGE_LOOP('',(#3864,#1982,#3867,#3868));+#3864=ORIENTED_EDGE('',*,*,#3865,.T.);+#3865=EDGE_CURVE('',#1912,#1979,#3866,.T.);+#3866=LINE('',#1913,#215);+#3867=ORIENTED_EDGE('',*,*,#3855,.F.);+#3868=ORIENTED_EDGE('',*,*,#1916,.F.);+#3869=CYLINDRICAL_SURFACE('',#3870,1.E-01);+#3870=AXIS2_PLACEMENT_3D('',#1899,#863,#902);+#3871=ADVANCED_FACE('',(#3872),#3879,.F.);+#3872=FACE_BOUND('',#3873,.F.);+#3873=EDGE_LOOP('',(#3874,#1977,#3877,#3878));+#3874=ORIENTED_EDGE('',*,*,#3875,.T.);+#3875=EDGE_CURVE('',#1907,#1974,#3876,.T.);+#3876=LINE('',#1908,#215);+#3877=ORIENTED_EDGE('',*,*,#3865,.F.);+#3878=ORIENTED_EDGE('',*,*,#1911,.F.);+#3879=PLANE('',#3880);+#3880=AXIS2_PLACEMENT_3D('',#1908,#3066,#817);+#3881=ADVANCED_FACE('',(#3882),#3889,.F.);+#3882=FACE_BOUND('',#3883,.F.);+#3883=EDGE_LOOP('',(#3884,#1972,#3887,#3888));+#3884=ORIENTED_EDGE('',*,*,#3885,.T.);+#3885=EDGE_CURVE('',#1902,#1969,#3886,.T.);+#3886=LINE('',#1903,#215);+#3887=ORIENTED_EDGE('',*,*,#3875,.F.);+#3888=ORIENTED_EDGE('',*,*,#1906,.F.);+#3889=PLANE('',#3890);+#3890=AXIS2_PLACEMENT_3D('',#1903,#817,#13);+#3891=ADVANCED_FACE('',(#3892),#3899,.F.);+#3892=FACE_BOUND('',#3893,.F.);+#3893=EDGE_LOOP('',(#3894,#1967,#3897,#3898));+#3894=ORIENTED_EDGE('',*,*,#3895,.T.);+#3895=EDGE_CURVE('',#1895,#1962,#3896,.T.);+#3896=LINE('',#1896,#215);+#3897=ORIENTED_EDGE('',*,*,#3885,.F.);+#3898=ORIENTED_EDGE('',*,*,#1901,.F.);+#3899=PLANE('',#3900);+#3900=AXIS2_PLACEMENT_3D('',#1896,#13,#204);+#3901=ADVANCED_FACE('',(#3902),#3909,.T.);+#3902=FACE_BOUND('',#3903,.F.);+#3903=EDGE_LOOP('',(#3904,#1960,#3907,#3908));+#3904=ORIENTED_EDGE('',*,*,#3905,.T.);+#3905=EDGE_CURVE('',#1890,#1957,#3906,.T.);+#3906=LINE('',#1891,#215);+#3907=ORIENTED_EDGE('',*,*,#3895,.F.);+#3908=ORIENTED_EDGE('',*,*,#1894,.F.);+#3909=CYLINDRICAL_SURFACE('',#3910,0.2);+#3910=AXIS2_PLACEMENT_3D('',#1899,#863,#879);+#3911=ADVANCED_FACE('',(#3912),#3917,.F.);+#3912=FACE_BOUND('',#3913,.F.);+#3913=EDGE_LOOP('',(#3914,#1955,#3915,#3916));+#3914=ORIENTED_EDGE('',*,*,#1948,.T.);+#3915=ORIENTED_EDGE('',*,*,#3905,.F.);+#3916=ORIENTED_EDGE('',*,*,#1889,.F.);+#3917=PLANE('',#3918);+#3918=AXIS2_PLACEMENT_3D('',#1884,#3288,#871);+#3919=ADVANCED_FACE('',(#3920),#3932,.F.);+#3920=FACE_BOUND('',#3921,.F.);+#3921=EDGE_LOOP('',(#3922,#3923,#3928,#3931));+#3922=ORIENTED_EDGE('',*,*,#2031,.T.);+#3923=ORIENTED_EDGE('',*,*,#3924,.T.);+#3924=EDGE_CURVE('',#2027,#3925,#3927,.T.);+#3925=VERTEX_POINT('',#3926);+#3926=CARTESIAN_POINT('',(3.286838234914,3.218419117457,1.5));+#3927=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2028,#3926),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3928=ORIENTED_EDGE('',*,*,#3929,.F.);+#3929=EDGE_CURVE('',#3189,#3925,#3930,.T.);+#3930=LINE('',#3190,#115);+#3931=ORIENTED_EDGE('',*,*,#3188,.F.);+#3932=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#2033,#3190),(#2028,#3926)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#3933=ADVANCED_FACE('',(#3934),#4010,.F.);+#3934=FACE_BOUND('',#3935,.F.);+#3935=EDGE_LOOP('',(#3936,#3937,#3941,#3945,#3949,#3953,#3957,#3961,#3965,#3969,#3973,#3977,#3981,#3985,#3989,#3993,#3997,#4001,#4006,#4009));+#3936=ORIENTED_EDGE('',*,*,#2026,.T.);+#3937=ORIENTED_EDGE('',*,*,#3938,.T.);+#3938=EDGE_CURVE('',#2021,#3939,#2029,.T.);+#3939=VERTEX_POINT('',#3940);+#3940=CARTESIAN_POINT('',(3.425,2.625,0.85));+#3941=ORIENTED_EDGE('',*,*,#3942,.T.);+#3942=EDGE_CURVE('',#3939,#3943,#2029,.T.);+#3943=VERTEX_POINT('',#3944);+#3944=CARTESIAN_POINT('',(3.425,2.175,0.85));+#3945=ORIENTED_EDGE('',*,*,#3946,.T.);+#3946=EDGE_CURVE('',#3943,#3947,#2029,.T.);+#3947=VERTEX_POINT('',#3948);+#3948=CARTESIAN_POINT('',(3.425,1.825,0.85));+#3949=ORIENTED_EDGE('',*,*,#3950,.T.);+#3950=EDGE_CURVE('',#3947,#3951,#2029,.T.);+#3951=VERTEX_POINT('',#3952);+#3952=CARTESIAN_POINT('',(3.425,1.375,0.85));+#3953=ORIENTED_EDGE('',*,*,#3954,.T.);+#3954=EDGE_CURVE('',#3951,#3955,#2029,.T.);+#3955=VERTEX_POINT('',#3956);+#3956=CARTESIAN_POINT('',(3.425,1.025,0.85));+#3957=ORIENTED_EDGE('',*,*,#3958,.T.);+#3958=EDGE_CURVE('',#3955,#3959,#2029,.T.);+#3959=VERTEX_POINT('',#3960);+#3960=CARTESIAN_POINT('',(3.425,0.575,0.85));+#3961=ORIENTED_EDGE('',*,*,#3962,.T.);+#3962=EDGE_CURVE('',#3959,#3963,#2029,.T.);+#3963=VERTEX_POINT('',#3964);+#3964=CARTESIAN_POINT('',(3.425,0.225,0.85));+#3965=ORIENTED_EDGE('',*,*,#3966,.T.);+#3966=EDGE_CURVE('',#3963,#3967,#2029,.T.);+#3967=VERTEX_POINT('',#3968);+#3968=CARTESIAN_POINT('',(3.425,-0.225,0.85));+#3969=ORIENTED_EDGE('',*,*,#3970,.T.);+#3970=EDGE_CURVE('',#3967,#3971,#2029,.T.);+#3971=VERTEX_POINT('',#3972);+#3972=CARTESIAN_POINT('',(3.425,-0.575,0.85));+#3973=ORIENTED_EDGE('',*,*,#3974,.T.);+#3974=EDGE_CURVE('',#3971,#3975,#2029,.T.);+#3975=VERTEX_POINT('',#3976);+#3976=CARTESIAN_POINT('',(3.425,-1.025,0.85));+#3977=ORIENTED_EDGE('',*,*,#3978,.T.);+#3978=EDGE_CURVE('',#3975,#3979,#2029,.T.);+#3979=VERTEX_POINT('',#3980);+#3980=CARTESIAN_POINT('',(3.425,-1.375,0.85));+#3981=ORIENTED_EDGE('',*,*,#3982,.T.);+#3982=EDGE_CURVE('',#3979,#3983,#2029,.T.);+#3983=VERTEX_POINT('',#3984);+#3984=CARTESIAN_POINT('',(3.425,-1.825,0.85));+#3985=ORIENTED_EDGE('',*,*,#3986,.T.);+#3986=EDGE_CURVE('',#3983,#3987,#2029,.T.);+#3987=VERTEX_POINT('',#3988);+#3988=CARTESIAN_POINT('',(3.425,-2.175,0.85));+#3989=ORIENTED_EDGE('',*,*,#3990,.T.);+#3990=EDGE_CURVE('',#3987,#3991,#2029,.T.);+#3991=VERTEX_POINT('',#3992);+#3992=CARTESIAN_POINT('',(3.425,-2.625,0.85));+#3993=ORIENTED_EDGE('',*,*,#3994,.T.);+#3994=EDGE_CURVE('',#3991,#3995,#2029,.T.);+#3995=VERTEX_POINT('',#3996);+#3996=CARTESIAN_POINT('',(3.425,-2.975,0.85));+#3997=ORIENTED_EDGE('',*,*,#3998,.T.);+#3998=EDGE_CURVE('',#3995,#3999,#2029,.T.);+#3999=VERTEX_POINT('',#4000);+#4000=CARTESIAN_POINT('',(3.425,-3.2875,0.85));+#4001=ORIENTED_EDGE('',*,*,#4002,.T.);+#4002=EDGE_CURVE('',#3999,#4003,#4005,.T.);+#4003=VERTEX_POINT('',#4004);+#4004=CARTESIAN_POINT('',(3.286838234914,-3.218419117457,1.5));+#4005=B_SPLINE_CURVE_WITH_KNOTS('',1,(#4000,#4004),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4006=ORIENTED_EDGE('',*,*,#4007,.F.);+#4007=EDGE_CURVE('',#3925,#4003,#4008,.T.);+#4008=LINE('',#3926,#122);+#4009=ORIENTED_EDGE('',*,*,#3924,.F.);+#4010=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#2028,#3926),(#4000,#4004)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#4011=ADVANCED_FACE('',(#4012),#4029,.F.);+#4012=FACE_BOUND('',#4013,.F.);+#4013=EDGE_LOOP('',(#4014,#4017,#4022,#4025,#4027,#4028));+#4014=ORIENTED_EDGE('',*,*,#4015,.F.);+#4015=EDGE_CURVE('',#4016,#2016,#2023,.T.);+#4016=VERTEX_POINT('',#2024);+#4017=ORIENTED_EDGE('',*,*,#4018,.T.);+#4018=EDGE_CURVE('',#4016,#4019,#4021,.T.);+#4019=VERTEX_POINT('',#4020);+#4020=CARTESIAN_POINT('',(3.7,2.625,0.85));+#4021=LINE('',#2024,#122);+#4022=ORIENTED_EDGE('',*,*,#4023,.T.);+#4023=EDGE_CURVE('',#4019,#2401,#4024,.T.);+#4024=LINE('',#4020,#136);+#4025=ORIENTED_EDGE('',*,*,#4026,.T.);+#4026=EDGE_CURVE('',#2401,#3939,#4024,.T.);+#4027=ORIENTED_EDGE('',*,*,#3938,.F.);+#4028=ORIENTED_EDGE('',*,*,#2020,.F.);+#4029=PLANE('',#4030);+#4030=AXIS2_PLACEMENT_3D('',#2024,#3066,#137);+#4031=ADVANCED_FACE('',(#4032),#846,.F.);+#4032=FACE_BOUND('',#4033,.F.);+#4033=EDGE_LOOP('',(#4034,#4035,#4039,#4040,#4045,#4051,#4057,#4058));+#4034=ORIENTED_EDGE('',*,*,#2052,.T.);+#4035=ORIENTED_EDGE('',*,*,#4036,.T.);+#4036=EDGE_CURVE('',#2047,#3073,#4037,.T.);+#4037=LINE('',#4038,#840);+#4038=CARTESIAN_POINT('',(-3.7,-2.975,0.85));+#4039=ORIENTED_EDGE('',*,*,#3071,.F.);+#4040=ORIENTED_EDGE('',*,*,#4041,.F.);+#4041=EDGE_CURVE('',#4042,#3072,#4044,.T.);+#4042=VERTEX_POINT('',#4043);+#4043=CARTESIAN_POINT('',(-3.2875,-3.425,0.85));+#4044=LINE('',#4043,#143);+#4045=ORIENTED_EDGE('',*,*,#4046,.F.);+#4046=EDGE_CURVE('',#4047,#4042,#4049,.T.);+#4047=VERTEX_POINT('',#4048);+#4048=CARTESIAN_POINT('',(-2.975,-3.425,0.85));+#4049=LINE('',#4050,#136);+#4050=CARTESIAN_POINT('',(3.2875,-3.425,0.85));+#4051=ORIENTED_EDGE('',*,*,#4052,.F.);+#4052=EDGE_CURVE('',#3035,#4047,#4053,.T.);+#4053=LINE('',#4054,#4055);+#4054=CARTESIAN_POINT('',(-2.975,-3.7,0.85));+#4055=VECTOR('',#4056,1.);+#4056=DIRECTION('',(1.110223024625E-16,1.,0.));+#4057=ORIENTED_EDGE('',*,*,#3042,.T.);+#4058=ORIENTED_EDGE('',*,*,#2692,.T.);+#4059=ADVANCED_FACE('',(#4060),#4128,.F.);+#4060=FACE_BOUND('',#4061,.F.);+#4061=EDGE_LOOP('',(#4062,#4063,#4064,#4073,#4080,#4089,#4094,#4099,#4104,#4112,#4119,#4126));+#4062=ORIENTED_EDGE('',*,*,#2046,.F.);+#4063=ORIENTED_EDGE('',*,*,#2059,.T.);+#4064=ORIENTED_EDGE('',*,*,#4065,.T.);+#4065=EDGE_CURVE('',#2060,#4066,#4068,.T.);+#4066=VERTEX_POINT('',#4067);+#4067=CARTESIAN_POINT('',(-3.798480775301,-2.975,0.667364817767));+#4068=CIRCLE('',#4069,0.1);+#4069=AXIS2_PLACEMENT_3D('',#4070,#4071,#4072);+#4070=CARTESIAN_POINT('',(-3.7,-2.975,0.65));+#4071=DIRECTION('',(-1.144237745222E-17,-1.,-2.189528850508E-47));+#4072=DIRECTION('',(-4.440892098501E-15,5.081436361562E-32,1.));+#4073=ORIENTED_EDGE('',*,*,#4074,.T.);+#4074=EDGE_CURVE('',#4066,#4075,#4077,.T.);+#4075=VERTEX_POINT('',#4076);+#4076=CARTESIAN_POINT('',(-3.882385590716,-2.975,0.165270364467));+#4077=LINE('',#4067,#4078);+#4078=VECTOR('',#4079,1.);+#4079=DIRECTION('',(-0.16482406317,1.885979144002E-18,-0.986322983713));+#4080=ORIENTED_EDGE('',*,*,#4081,.T.);+#4081=EDGE_CURVE('',#4075,#4082,#4084,.T.);+#4082=VERTEX_POINT('',#4083);+#4083=CARTESIAN_POINT('',(-4.079347141319,-2.975,1.387778780781E-16));+#4084=CIRCLE('',#4085,0.2);+#4085=AXIS2_PLACEMENT_3D('',#4086,#4087,#4088);+#4086=CARTESIAN_POINT('',(-4.079347141319,-2.975,0.2));+#4087=DIRECTION('',(1.144237745222E-17,1.,-2.311115933265E-33));+#4088=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#4089=ORIENTED_EDGE('',*,*,#4090,.T.);+#4090=EDGE_CURVE('',#4082,#4091,#4093,.T.);+#4091=VERTEX_POINT('',#4092);+#4092=CARTESIAN_POINT('',(-4.5,-2.975,1.387778780781E-16));+#4093=LINE('',#4083,#2064);+#4094=ORIENTED_EDGE('',*,*,#4095,.T.);+#4095=EDGE_CURVE('',#4091,#4096,#4098,.T.);+#4096=VERTEX_POINT('',#4097);+#4097=CARTESIAN_POINT('',(-4.5,-2.975,0.1));+#4098=LINE('',#4092,#188);+#4099=ORIENTED_EDGE('',*,*,#4100,.T.);+#4100=EDGE_CURVE('',#4096,#4101,#4103,.T.);+#4101=VERTEX_POINT('',#4102);+#4102=CARTESIAN_POINT('',(-4.079347141319,-2.975,0.1));+#4103=LINE('',#4097,#840);+#4104=ORIENTED_EDGE('',*,*,#4105,.T.);+#4105=EDGE_CURVE('',#4101,#4106,#4108,.T.);+#4106=VERTEX_POINT('',#4107);+#4107=CARTESIAN_POINT('',(-3.980866366018,-2.975,0.182635182233));+#4108=CIRCLE('',#4109,1.E-01);+#4109=AXIS2_PLACEMENT_3D('',#4086,#4110,#4111);+#4110=DIRECTION('',(-1.144237745222E-17,-1.,2.189528850508E-47));+#4111=DIRECTION('',(-8.881784197001E-15,1.016287272312E-31,-1.));+#4112=ORIENTED_EDGE('',*,*,#4113,.T.);+#4113=EDGE_CURVE('',#4106,#4114,#4116,.T.);+#4114=VERTEX_POINT('',#4115);+#4115=CARTESIAN_POINT('',(-3.896961550602,-2.975,0.684729635533));+#4116=LINE('',#4107,#4117);+#4117=VECTOR('',#4118,1.);+#4118=DIRECTION('',(0.16482406317,-1.885979144002E-18,0.986322983713));+#4119=ORIENTED_EDGE('',*,*,#4120,.T.);+#4120=EDGE_CURVE('',#4114,#4121,#4122,.T.);+#4121=VERTEX_POINT('',#4038);+#4122=CIRCLE('',#4123,0.2);+#4123=AXIS2_PLACEMENT_3D('',#4070,#4124,#4125);+#4124=DIRECTION('',(1.144237745222E-17,1.,-7.703719777549E-34));+#4125=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#4126=ORIENTED_EDGE('',*,*,#4127,.T.);+#4127=EDGE_CURVE('',#4121,#2047,#4037,.T.);+#4128=PLANE('',#4129);+#4129=AXIS2_PLACEMENT_3D('',#4130,#2077,#13);+#4130=CARTESIAN_POINT('',(-3.914276639233,-2.975,0.410238158856));+#4131=ADVANCED_FACE('',(#4132),#4146,.F.);+#4132=FACE_BOUND('',#4133,.F.);+#4133=EDGE_LOOP('',(#4134,#4135,#4142,#4145));+#4134=ORIENTED_EDGE('',*,*,#2074,.T.);+#4135=ORIENTED_EDGE('',*,*,#4136,.T.);+#4136=EDGE_CURVE('',#2069,#4137,#4139,.T.);+#4137=VERTEX_POINT('',#4138);+#4138=CARTESIAN_POINT('',(-3.798480775301,-2.625,0.667364817767));+#4139=CIRCLE('',#4140,0.1);+#4140=AXIS2_PLACEMENT_3D('',#4141,#4071,#4072);+#4141=CARTESIAN_POINT('',(-3.7,-2.625,0.65));+#4142=ORIENTED_EDGE('',*,*,#4143,.F.);+#4143=EDGE_CURVE('',#4066,#4137,#4144,.T.);+#4144=LINE('',#4067,#2076);+#4145=ORIENTED_EDGE('',*,*,#4065,.F.);+#4146=CYLINDRICAL_SURFACE('',#4147,0.1);+#4147=AXIS2_PLACEMENT_3D('',#4070,#4148,#4072);+#4148=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#4149=ADVANCED_FACE('',(#4150),#4199,.T.);+#4150=FACE_BOUND('',#4151,.T.);+#4151=EDGE_LOOP('',(#2083,#2067,#4135,#4152,#4157,#4164,#4169,#4174,#4179,#4185,#4190,#4196));+#4152=ORIENTED_EDGE('',*,*,#4153,.T.);+#4153=EDGE_CURVE('',#4137,#4154,#4156,.T.);+#4154=VERTEX_POINT('',#4155);+#4155=CARTESIAN_POINT('',(-3.882385590716,-2.625,0.165270364467));+#4156=LINE('',#4138,#4078);+#4157=ORIENTED_EDGE('',*,*,#4158,.T.);+#4158=EDGE_CURVE('',#4154,#4159,#4161,.T.);+#4159=VERTEX_POINT('',#4160);+#4160=CARTESIAN_POINT('',(-4.079347141319,-2.625,1.387778780781E-16));+#4161=CIRCLE('',#4162,0.2);+#4162=AXIS2_PLACEMENT_3D('',#4163,#4087,#4088);+#4163=CARTESIAN_POINT('',(-4.079347141319,-2.625,0.2));+#4164=ORIENTED_EDGE('',*,*,#4165,.T.);+#4165=EDGE_CURVE('',#4159,#4166,#4168,.T.);+#4166=VERTEX_POINT('',#4167);+#4167=CARTESIAN_POINT('',(-4.5,-2.625,1.387778780781E-16));+#4168=LINE('',#4160,#2064);+#4169=ORIENTED_EDGE('',*,*,#4170,.T.);+#4170=EDGE_CURVE('',#4166,#4171,#4173,.T.);+#4171=VERTEX_POINT('',#4172);+#4172=CARTESIAN_POINT('',(-4.5,-2.625,0.1));+#4173=LINE('',#4167,#188);+#4174=ORIENTED_EDGE('',*,*,#4175,.T.);+#4175=EDGE_CURVE('',#4171,#4176,#4178,.T.);+#4176=VERTEX_POINT('',#4177);+#4177=CARTESIAN_POINT('',(-4.079347141319,-2.625,0.1));+#4178=LINE('',#4172,#840);+#4179=ORIENTED_EDGE('',*,*,#4180,.T.);+#4180=EDGE_CURVE('',#4176,#4181,#4183,.T.);+#4181=VERTEX_POINT('',#4182);+#4182=CARTESIAN_POINT('',(-3.980866366018,-2.625,0.182635182233));+#4183=CIRCLE('',#4184,1.E-01);+#4184=AXIS2_PLACEMENT_3D('',#4163,#4110,#4111);+#4185=ORIENTED_EDGE('',*,*,#4186,.T.);+#4186=EDGE_CURVE('',#4181,#4187,#4189,.T.);+#4187=VERTEX_POINT('',#4188);+#4188=CARTESIAN_POINT('',(-3.896961550602,-2.625,0.684729635533));+#4189=LINE('',#4182,#4117);+#4190=ORIENTED_EDGE('',*,*,#4191,.T.);+#4191=EDGE_CURVE('',#4187,#4192,#4194,.T.);+#4192=VERTEX_POINT('',#4193);+#4193=CARTESIAN_POINT('',(-3.7,-2.625,0.85));+#4194=CIRCLE('',#4195,0.2);+#4195=AXIS2_PLACEMENT_3D('',#4141,#4124,#4125);+#4196=ORIENTED_EDGE('',*,*,#4197,.T.);+#4197=EDGE_CURVE('',#4192,#2085,#4198,.T.);+#4198=LINE('',#4193,#840);+#4199=PLANE('',#4200);+#4200=AXIS2_PLACEMENT_3D('',#4201,#2077,#13);+#4201=CARTESIAN_POINT('',(-3.914276639233,-2.625,0.410238158856));+#4202=ADVANCED_FACE('',(#4203),#846,.F.);+#4203=FACE_BOUND('',#4204,.F.);+#4204=EDGE_LOOP('',(#4205,#4206,#4210,#4211));+#4205=ORIENTED_EDGE('',*,*,#2097,.T.);+#4206=ORIENTED_EDGE('',*,*,#4207,.T.);+#4207=EDGE_CURVE('',#2092,#3081,#4208,.T.);+#4208=LINE('',#4209,#840);+#4209=CARTESIAN_POINT('',(-3.7,-2.175,0.85));+#4210=ORIENTED_EDGE('',*,*,#3080,.F.);+#4211=ORIENTED_EDGE('',*,*,#4212,.F.);+#4212=EDGE_CURVE('',#2085,#3077,#4198,.T.);+#4213=ADVANCED_FACE('',(#4214),#4270,.F.);+#4214=FACE_BOUND('',#4215,.F.);+#4215=EDGE_LOOP('',(#4216,#4217,#4218,#4225,#4230,#4237,#4242,#4247,#4252,#4258,#4263,#4268));+#4216=ORIENTED_EDGE('',*,*,#2091,.F.);+#4217=ORIENTED_EDGE('',*,*,#2102,.T.);+#4218=ORIENTED_EDGE('',*,*,#4219,.T.);+#4219=EDGE_CURVE('',#2103,#4220,#4222,.T.);+#4220=VERTEX_POINT('',#4221);+#4221=CARTESIAN_POINT('',(-3.798480775301,-2.175,0.667364817767));+#4222=CIRCLE('',#4223,0.1);+#4223=AXIS2_PLACEMENT_3D('',#4224,#4071,#4072);+#4224=CARTESIAN_POINT('',(-3.7,-2.175,0.65));+#4225=ORIENTED_EDGE('',*,*,#4226,.T.);+#4226=EDGE_CURVE('',#4220,#4227,#4229,.T.);+#4227=VERTEX_POINT('',#4228);+#4228=CARTESIAN_POINT('',(-3.882385590716,-2.175,0.165270364467));+#4229=LINE('',#4221,#4078);+#4230=ORIENTED_EDGE('',*,*,#4231,.T.);+#4231=EDGE_CURVE('',#4227,#4232,#4234,.T.);+#4232=VERTEX_POINT('',#4233);+#4233=CARTESIAN_POINT('',(-4.079347141319,-2.175,1.387778780781E-16));+#4234=CIRCLE('',#4235,0.2);+#4235=AXIS2_PLACEMENT_3D('',#4236,#4087,#4088);+#4236=CARTESIAN_POINT('',(-4.079347141319,-2.175,0.2));+#4237=ORIENTED_EDGE('',*,*,#4238,.T.);+#4238=EDGE_CURVE('',#4232,#4239,#4241,.T.);+#4239=VERTEX_POINT('',#4240);+#4240=CARTESIAN_POINT('',(-4.5,-2.175,1.387778780781E-16));+#4241=LINE('',#4233,#2064);+#4242=ORIENTED_EDGE('',*,*,#4243,.T.);+#4243=EDGE_CURVE('',#4239,#4244,#4246,.T.);+#4244=VERTEX_POINT('',#4245);+#4245=CARTESIAN_POINT('',(-4.5,-2.175,0.1));+#4246=LINE('',#4240,#188);+#4247=ORIENTED_EDGE('',*,*,#4248,.T.);+#4248=EDGE_CURVE('',#4244,#4249,#4251,.T.);+#4249=VERTEX_POINT('',#4250);+#4250=CARTESIAN_POINT('',(-4.079347141319,-2.175,0.1));+#4251=LINE('',#4245,#840);+#4252=ORIENTED_EDGE('',*,*,#4253,.T.);+#4253=EDGE_CURVE('',#4249,#4254,#4256,.T.);+#4254=VERTEX_POINT('',#4255);+#4255=CARTESIAN_POINT('',(-3.980866366018,-2.175,0.182635182233));+#4256=CIRCLE('',#4257,1.E-01);+#4257=AXIS2_PLACEMENT_3D('',#4236,#4110,#4111);+#4258=ORIENTED_EDGE('',*,*,#4259,.T.);+#4259=EDGE_CURVE('',#4254,#4260,#4262,.T.);+#4260=VERTEX_POINT('',#4261);+#4261=CARTESIAN_POINT('',(-3.896961550602,-2.175,0.684729635533));+#4262=LINE('',#4255,#4117);+#4263=ORIENTED_EDGE('',*,*,#4264,.T.);+#4264=EDGE_CURVE('',#4260,#4265,#4266,.T.);+#4265=VERTEX_POINT('',#4209);+#4266=CIRCLE('',#4267,0.2);+#4267=AXIS2_PLACEMENT_3D('',#4224,#4124,#4125);+#4268=ORIENTED_EDGE('',*,*,#4269,.T.);+#4269=EDGE_CURVE('',#4265,#2092,#4208,.T.);+#4270=PLANE('',#4271);+#4271=AXIS2_PLACEMENT_3D('',#4272,#2077,#13);+#4272=CARTESIAN_POINT('',(-3.914276639233,-2.175,0.410238158856));+#4273=ADVANCED_FACE('',(#4274),#4288,.F.);+#4274=FACE_BOUND('',#4275,.F.);+#4275=EDGE_LOOP('',(#4276,#4277,#4284,#4287));+#4276=ORIENTED_EDGE('',*,*,#2115,.T.);+#4277=ORIENTED_EDGE('',*,*,#4278,.T.);+#4278=EDGE_CURVE('',#2110,#4279,#4281,.T.);+#4279=VERTEX_POINT('',#4280);+#4280=CARTESIAN_POINT('',(-3.798480775301,-1.825,0.667364817767));+#4281=CIRCLE('',#4282,0.1);+#4282=AXIS2_PLACEMENT_3D('',#4283,#4071,#4072);+#4283=CARTESIAN_POINT('',(-3.7,-1.825,0.65));+#4284=ORIENTED_EDGE('',*,*,#4285,.F.);+#4285=EDGE_CURVE('',#4220,#4279,#4286,.T.);+#4286=LINE('',#4221,#2076);+#4287=ORIENTED_EDGE('',*,*,#4219,.F.);+#4288=CYLINDRICAL_SURFACE('',#4289,0.1);+#4289=AXIS2_PLACEMENT_3D('',#4224,#4148,#4072);+#4290=ADVANCED_FACE('',(#4291),#4340,.T.);+#4291=FACE_BOUND('',#4292,.T.);+#4292=EDGE_LOOP('',(#2122,#2108,#4277,#4293,#4298,#4305,#4310,#4315,#4320,#4326,#4331,#4337));+#4293=ORIENTED_EDGE('',*,*,#4294,.T.);+#4294=EDGE_CURVE('',#4279,#4295,#4297,.T.);+#4295=VERTEX_POINT('',#4296);+#4296=CARTESIAN_POINT('',(-3.882385590716,-1.825,0.165270364467));+#4297=LINE('',#4280,#4078);+#4298=ORIENTED_EDGE('',*,*,#4299,.T.);+#4299=EDGE_CURVE('',#4295,#4300,#4302,.T.);+#4300=VERTEX_POINT('',#4301);+#4301=CARTESIAN_POINT('',(-4.079347141319,-1.825,1.387778780781E-16));+#4302=CIRCLE('',#4303,0.2);+#4303=AXIS2_PLACEMENT_3D('',#4304,#4087,#4088);+#4304=CARTESIAN_POINT('',(-4.079347141319,-1.825,0.2));+#4305=ORIENTED_EDGE('',*,*,#4306,.T.);+#4306=EDGE_CURVE('',#4300,#4307,#4309,.T.);+#4307=VERTEX_POINT('',#4308);+#4308=CARTESIAN_POINT('',(-4.5,-1.825,1.387778780781E-16));+#4309=LINE('',#4301,#2064);+#4310=ORIENTED_EDGE('',*,*,#4311,.T.);+#4311=EDGE_CURVE('',#4307,#4312,#4314,.T.);+#4312=VERTEX_POINT('',#4313);+#4313=CARTESIAN_POINT('',(-4.5,-1.825,0.1));+#4314=LINE('',#4308,#188);+#4315=ORIENTED_EDGE('',*,*,#4316,.T.);+#4316=EDGE_CURVE('',#4312,#4317,#4319,.T.);+#4317=VERTEX_POINT('',#4318);+#4318=CARTESIAN_POINT('',(-4.079347141319,-1.825,0.1));+#4319=LINE('',#4313,#840);+#4320=ORIENTED_EDGE('',*,*,#4321,.T.);+#4321=EDGE_CURVE('',#4317,#4322,#4324,.T.);+#4322=VERTEX_POINT('',#4323);+#4323=CARTESIAN_POINT('',(-3.980866366018,-1.825,0.182635182233));+#4324=CIRCLE('',#4325,1.E-01);+#4325=AXIS2_PLACEMENT_3D('',#4304,#4110,#4111);+#4326=ORIENTED_EDGE('',*,*,#4327,.T.);+#4327=EDGE_CURVE('',#4322,#4328,#4330,.T.);+#4328=VERTEX_POINT('',#4329);+#4329=CARTESIAN_POINT('',(-3.896961550602,-1.825,0.684729635533));+#4330=LINE('',#4323,#4117);+#4331=ORIENTED_EDGE('',*,*,#4332,.T.);+#4332=EDGE_CURVE('',#4328,#4333,#4335,.T.);+#4333=VERTEX_POINT('',#4334);+#4334=CARTESIAN_POINT('',(-3.7,-1.825,0.85));+#4335=CIRCLE('',#4336,0.2);+#4336=AXIS2_PLACEMENT_3D('',#4283,#4124,#4125);+#4337=ORIENTED_EDGE('',*,*,#4338,.T.);+#4338=EDGE_CURVE('',#4333,#2124,#4339,.T.);+#4339=LINE('',#4334,#840);+#4340=PLANE('',#4341);+#4341=AXIS2_PLACEMENT_3D('',#4342,#2077,#13);+#4342=CARTESIAN_POINT('',(-3.914276639233,-1.825,0.410238158856));+#4343=ADVANCED_FACE('',(#4344),#846,.F.);+#4344=FACE_BOUND('',#4345,.F.);+#4345=EDGE_LOOP('',(#4346,#4347,#4351,#4352));+#4346=ORIENTED_EDGE('',*,*,#2136,.T.);+#4347=ORIENTED_EDGE('',*,*,#4348,.T.);+#4348=EDGE_CURVE('',#2131,#3089,#4349,.T.);+#4349=LINE('',#4350,#840);+#4350=CARTESIAN_POINT('',(-3.7,-1.375,0.85));+#4351=ORIENTED_EDGE('',*,*,#3088,.F.);+#4352=ORIENTED_EDGE('',*,*,#4353,.F.);+#4353=EDGE_CURVE('',#2124,#3085,#4339,.T.);+#4354=ADVANCED_FACE('',(#4355),#4411,.F.);+#4355=FACE_BOUND('',#4356,.F.);+#4356=EDGE_LOOP('',(#4357,#4358,#4359,#4366,#4371,#4378,#4383,#4388,#4393,#4399,#4404,#4409));+#4357=ORIENTED_EDGE('',*,*,#2130,.F.);+#4358=ORIENTED_EDGE('',*,*,#2141,.T.);+#4359=ORIENTED_EDGE('',*,*,#4360,.T.);+#4360=EDGE_CURVE('',#2142,#4361,#4363,.T.);+#4361=VERTEX_POINT('',#4362);+#4362=CARTESIAN_POINT('',(-3.798480775301,-1.375,0.667364817767));+#4363=CIRCLE('',#4364,0.1);+#4364=AXIS2_PLACEMENT_3D('',#4365,#4071,#4072);+#4365=CARTESIAN_POINT('',(-3.7,-1.375,0.65));+#4366=ORIENTED_EDGE('',*,*,#4367,.T.);+#4367=EDGE_CURVE('',#4361,#4368,#4370,.T.);+#4368=VERTEX_POINT('',#4369);+#4369=CARTESIAN_POINT('',(-3.882385590716,-1.375,0.165270364467));+#4370=LINE('',#4362,#4078);+#4371=ORIENTED_EDGE('',*,*,#4372,.T.);+#4372=EDGE_CURVE('',#4368,#4373,#4375,.T.);+#4373=VERTEX_POINT('',#4374);+#4374=CARTESIAN_POINT('',(-4.079347141319,-1.375,1.387778780781E-16));+#4375=CIRCLE('',#4376,0.2);+#4376=AXIS2_PLACEMENT_3D('',#4377,#4087,#4088);+#4377=CARTESIAN_POINT('',(-4.079347141319,-1.375,0.2));+#4378=ORIENTED_EDGE('',*,*,#4379,.T.);+#4379=EDGE_CURVE('',#4373,#4380,#4382,.T.);+#4380=VERTEX_POINT('',#4381);+#4381=CARTESIAN_POINT('',(-4.5,-1.375,1.387778780781E-16));+#4382=LINE('',#4374,#2064);+#4383=ORIENTED_EDGE('',*,*,#4384,.T.);+#4384=EDGE_CURVE('',#4380,#4385,#4387,.T.);+#4385=VERTEX_POINT('',#4386);+#4386=CARTESIAN_POINT('',(-4.5,-1.375,0.1));+#4387=LINE('',#4381,#188);+#4388=ORIENTED_EDGE('',*,*,#4389,.T.);+#4389=EDGE_CURVE('',#4385,#4390,#4392,.T.);+#4390=VERTEX_POINT('',#4391);+#4391=CARTESIAN_POINT('',(-4.079347141319,-1.375,0.1));+#4392=LINE('',#4386,#840);+#4393=ORIENTED_EDGE('',*,*,#4394,.T.);+#4394=EDGE_CURVE('',#4390,#4395,#4397,.T.);+#4395=VERTEX_POINT('',#4396);+#4396=CARTESIAN_POINT('',(-3.980866366018,-1.375,0.182635182233));+#4397=CIRCLE('',#4398,1.E-01);+#4398=AXIS2_PLACEMENT_3D('',#4377,#4110,#4111);+#4399=ORIENTED_EDGE('',*,*,#4400,.T.);+#4400=EDGE_CURVE('',#4395,#4401,#4403,.T.);+#4401=VERTEX_POINT('',#4402);+#4402=CARTESIAN_POINT('',(-3.896961550602,-1.375,0.684729635533));+#4403=LINE('',#4396,#4117);+#4404=ORIENTED_EDGE('',*,*,#4405,.T.);+#4405=EDGE_CURVE('',#4401,#4406,#4407,.T.);+#4406=VERTEX_POINT('',#4350);+#4407=CIRCLE('',#4408,0.2);+#4408=AXIS2_PLACEMENT_3D('',#4365,#4124,#4125);+#4409=ORIENTED_EDGE('',*,*,#4410,.T.);+#4410=EDGE_CURVE('',#4406,#2131,#4349,.T.);+#4411=PLANE('',#4412);+#4412=AXIS2_PLACEMENT_3D('',#4413,#2077,#13);+#4413=CARTESIAN_POINT('',(-3.914276639233,-1.375,0.410238158856));+#4414=ADVANCED_FACE('',(#4415),#4429,.F.);+#4415=FACE_BOUND('',#4416,.F.);+#4416=EDGE_LOOP('',(#4417,#4418,#4425,#4428));+#4417=ORIENTED_EDGE('',*,*,#2154,.T.);+#4418=ORIENTED_EDGE('',*,*,#4419,.T.);+#4419=EDGE_CURVE('',#2149,#4420,#4422,.T.);+#4420=VERTEX_POINT('',#4421);+#4421=CARTESIAN_POINT('',(-3.798480775301,-1.025,0.667364817767));+#4422=CIRCLE('',#4423,0.1);+#4423=AXIS2_PLACEMENT_3D('',#4424,#4071,#4072);+#4424=CARTESIAN_POINT('',(-3.7,-1.025,0.65));+#4425=ORIENTED_EDGE('',*,*,#4426,.F.);+#4426=EDGE_CURVE('',#4361,#4420,#4427,.T.);+#4427=LINE('',#4362,#2076);+#4428=ORIENTED_EDGE('',*,*,#4360,.F.);+#4429=CYLINDRICAL_SURFACE('',#4430,0.1);+#4430=AXIS2_PLACEMENT_3D('',#4365,#4148,#4072);+#4431=ADVANCED_FACE('',(#4432),#4481,.T.);+#4432=FACE_BOUND('',#4433,.T.);+#4433=EDGE_LOOP('',(#2161,#2147,#4418,#4434,#4439,#4446,#4451,#4456,#4461,#4467,#4472,#4478));+#4434=ORIENTED_EDGE('',*,*,#4435,.T.);+#4435=EDGE_CURVE('',#4420,#4436,#4438,.T.);+#4436=VERTEX_POINT('',#4437);+#4437=CARTESIAN_POINT('',(-3.882385590716,-1.025,0.165270364467));+#4438=LINE('',#4421,#4078);+#4439=ORIENTED_EDGE('',*,*,#4440,.T.);+#4440=EDGE_CURVE('',#4436,#4441,#4443,.T.);+#4441=VERTEX_POINT('',#4442);+#4442=CARTESIAN_POINT('',(-4.079347141319,-1.025,1.387778780781E-16));+#4443=CIRCLE('',#4444,0.2);+#4444=AXIS2_PLACEMENT_3D('',#4445,#4087,#4088);+#4445=CARTESIAN_POINT('',(-4.079347141319,-1.025,0.2));+#4446=ORIENTED_EDGE('',*,*,#4447,.T.);+#4447=EDGE_CURVE('',#4441,#4448,#4450,.T.);+#4448=VERTEX_POINT('',#4449);+#4449=CARTESIAN_POINT('',(-4.5,-1.025,1.387778780781E-16));+#4450=LINE('',#4442,#2064);+#4451=ORIENTED_EDGE('',*,*,#4452,.T.);+#4452=EDGE_CURVE('',#4448,#4453,#4455,.T.);+#4453=VERTEX_POINT('',#4454);+#4454=CARTESIAN_POINT('',(-4.5,-1.025,0.1));+#4455=LINE('',#4449,#188);+#4456=ORIENTED_EDGE('',*,*,#4457,.T.);+#4457=EDGE_CURVE('',#4453,#4458,#4460,.T.);+#4458=VERTEX_POINT('',#4459);+#4459=CARTESIAN_POINT('',(-4.079347141319,-1.025,0.1));+#4460=LINE('',#4454,#840);+#4461=ORIENTED_EDGE('',*,*,#4462,.T.);+#4462=EDGE_CURVE('',#4458,#4463,#4465,.T.);+#4463=VERTEX_POINT('',#4464);+#4464=CARTESIAN_POINT('',(-3.980866366018,-1.025,0.182635182233));+#4465=CIRCLE('',#4466,1.E-01);+#4466=AXIS2_PLACEMENT_3D('',#4445,#4110,#4111);+#4467=ORIENTED_EDGE('',*,*,#4468,.T.);+#4468=EDGE_CURVE('',#4463,#4469,#4471,.T.);+#4469=VERTEX_POINT('',#4470);+#4470=CARTESIAN_POINT('',(-3.896961550602,-1.025,0.684729635533));+#4471=LINE('',#4464,#4117);+#4472=ORIENTED_EDGE('',*,*,#4473,.T.);+#4473=EDGE_CURVE('',#4469,#4474,#4476,.T.);+#4474=VERTEX_POINT('',#4475);+#4475=CARTESIAN_POINT('',(-3.7,-1.025,0.85));+#4476=CIRCLE('',#4477,0.2);+#4477=AXIS2_PLACEMENT_3D('',#4424,#4124,#4125);+#4478=ORIENTED_EDGE('',*,*,#4479,.T.);+#4479=EDGE_CURVE('',#4474,#2163,#4480,.T.);+#4480=LINE('',#4475,#840);+#4481=PLANE('',#4482);+#4482=AXIS2_PLACEMENT_3D('',#4483,#2077,#13);+#4483=CARTESIAN_POINT('',(-3.914276639233,-1.025,0.410238158856));+#4484=ADVANCED_FACE('',(#4485),#846,.F.);+#4485=FACE_BOUND('',#4486,.F.);+#4486=EDGE_LOOP('',(#4487,#4488,#4492,#4493));+#4487=ORIENTED_EDGE('',*,*,#2175,.T.);+#4488=ORIENTED_EDGE('',*,*,#4489,.T.);+#4489=EDGE_CURVE('',#2170,#3097,#4490,.T.);+#4490=LINE('',#4491,#840);+#4491=CARTESIAN_POINT('',(-3.7,-0.575,0.85));+#4492=ORIENTED_EDGE('',*,*,#3096,.F.);+#4493=ORIENTED_EDGE('',*,*,#4494,.F.);+#4494=EDGE_CURVE('',#2163,#3093,#4480,.T.);+#4495=ADVANCED_FACE('',(#4496),#4552,.F.);+#4496=FACE_BOUND('',#4497,.F.);+#4497=EDGE_LOOP('',(#4498,#4499,#4500,#4507,#4512,#4519,#4524,#4529,#4534,#4540,#4545,#4550));+#4498=ORIENTED_EDGE('',*,*,#2169,.F.);+#4499=ORIENTED_EDGE('',*,*,#2180,.T.);+#4500=ORIENTED_EDGE('',*,*,#4501,.T.);+#4501=EDGE_CURVE('',#2181,#4502,#4504,.T.);+#4502=VERTEX_POINT('',#4503);+#4503=CARTESIAN_POINT('',(-3.798480775301,-0.575,0.667364817767));+#4504=CIRCLE('',#4505,0.1);+#4505=AXIS2_PLACEMENT_3D('',#4506,#4071,#4072);+#4506=CARTESIAN_POINT('',(-3.7,-0.575,0.65));+#4507=ORIENTED_EDGE('',*,*,#4508,.T.);+#4508=EDGE_CURVE('',#4502,#4509,#4511,.T.);+#4509=VERTEX_POINT('',#4510);+#4510=CARTESIAN_POINT('',(-3.882385590716,-0.575,0.165270364467));+#4511=LINE('',#4503,#4078);+#4512=ORIENTED_EDGE('',*,*,#4513,.T.);+#4513=EDGE_CURVE('',#4509,#4514,#4516,.T.);+#4514=VERTEX_POINT('',#4515);+#4515=CARTESIAN_POINT('',(-4.079347141319,-0.575,1.387778780781E-16));+#4516=CIRCLE('',#4517,0.2);+#4517=AXIS2_PLACEMENT_3D('',#4518,#4087,#4088);+#4518=CARTESIAN_POINT('',(-4.079347141319,-0.575,0.2));+#4519=ORIENTED_EDGE('',*,*,#4520,.T.);+#4520=EDGE_CURVE('',#4514,#4521,#4523,.T.);+#4521=VERTEX_POINT('',#4522);+#4522=CARTESIAN_POINT('',(-4.5,-0.575,1.387778780781E-16));+#4523=LINE('',#4515,#2064);+#4524=ORIENTED_EDGE('',*,*,#4525,.T.);+#4525=EDGE_CURVE('',#4521,#4526,#4528,.T.);+#4526=VERTEX_POINT('',#4527);+#4527=CARTESIAN_POINT('',(-4.5,-0.575,0.1));+#4528=LINE('',#4522,#188);+#4529=ORIENTED_EDGE('',*,*,#4530,.T.);+#4530=EDGE_CURVE('',#4526,#4531,#4533,.T.);+#4531=VERTEX_POINT('',#4532);+#4532=CARTESIAN_POINT('',(-4.079347141319,-0.575,0.1));+#4533=LINE('',#4527,#840);+#4534=ORIENTED_EDGE('',*,*,#4535,.T.);+#4535=EDGE_CURVE('',#4531,#4536,#4538,.T.);+#4536=VERTEX_POINT('',#4537);+#4537=CARTESIAN_POINT('',(-3.980866366018,-0.575,0.182635182233));+#4538=CIRCLE('',#4539,1.E-01);+#4539=AXIS2_PLACEMENT_3D('',#4518,#4110,#4111);+#4540=ORIENTED_EDGE('',*,*,#4541,.T.);+#4541=EDGE_CURVE('',#4536,#4542,#4544,.T.);+#4542=VERTEX_POINT('',#4543);+#4543=CARTESIAN_POINT('',(-3.896961550602,-0.575,0.684729635533));+#4544=LINE('',#4537,#4117);+#4545=ORIENTED_EDGE('',*,*,#4546,.T.);+#4546=EDGE_CURVE('',#4542,#4547,#4548,.T.);+#4547=VERTEX_POINT('',#4491);+#4548=CIRCLE('',#4549,0.2);+#4549=AXIS2_PLACEMENT_3D('',#4506,#4124,#4125);+#4550=ORIENTED_EDGE('',*,*,#4551,.T.);+#4551=EDGE_CURVE('',#4547,#2170,#4490,.T.);+#4552=PLANE('',#4553);+#4553=AXIS2_PLACEMENT_3D('',#4554,#2077,#13);+#4554=CARTESIAN_POINT('',(-3.914276639233,-0.575,0.410238158856));+#4555=ADVANCED_FACE('',(#4556),#4570,.F.);+#4556=FACE_BOUND('',#4557,.F.);+#4557=EDGE_LOOP('',(#4558,#4559,#4566,#4569));+#4558=ORIENTED_EDGE('',*,*,#2193,.T.);+#4559=ORIENTED_EDGE('',*,*,#4560,.T.);+#4560=EDGE_CURVE('',#2188,#4561,#4563,.T.);+#4561=VERTEX_POINT('',#4562);+#4562=CARTESIAN_POINT('',(-3.798480775301,-0.225,0.667364817767));+#4563=CIRCLE('',#4564,0.1);+#4564=AXIS2_PLACEMENT_3D('',#4565,#4071,#4072);+#4565=CARTESIAN_POINT('',(-3.7,-0.225,0.65));+#4566=ORIENTED_EDGE('',*,*,#4567,.F.);+#4567=EDGE_CURVE('',#4502,#4561,#4568,.T.);+#4568=LINE('',#4503,#2076);+#4569=ORIENTED_EDGE('',*,*,#4501,.F.);+#4570=CYLINDRICAL_SURFACE('',#4571,0.1);+#4571=AXIS2_PLACEMENT_3D('',#4506,#4148,#4072);+#4572=ADVANCED_FACE('',(#4573),#4622,.T.);+#4573=FACE_BOUND('',#4574,.T.);+#4574=EDGE_LOOP('',(#2200,#2186,#4559,#4575,#4580,#4587,#4592,#4597,#4602,#4608,#4613,#4619));+#4575=ORIENTED_EDGE('',*,*,#4576,.T.);+#4576=EDGE_CURVE('',#4561,#4577,#4579,.T.);+#4577=VERTEX_POINT('',#4578);+#4578=CARTESIAN_POINT('',(-3.882385590716,-0.225,0.165270364467));+#4579=LINE('',#4562,#4078);+#4580=ORIENTED_EDGE('',*,*,#4581,.T.);+#4581=EDGE_CURVE('',#4577,#4582,#4584,.T.);+#4582=VERTEX_POINT('',#4583);+#4583=CARTESIAN_POINT('',(-4.079347141319,-0.225,1.387778780781E-16));+#4584=CIRCLE('',#4585,0.2);+#4585=AXIS2_PLACEMENT_3D('',#4586,#4087,#4088);+#4586=CARTESIAN_POINT('',(-4.079347141319,-0.225,0.2));+#4587=ORIENTED_EDGE('',*,*,#4588,.T.);+#4588=EDGE_CURVE('',#4582,#4589,#4591,.T.);+#4589=VERTEX_POINT('',#4590);+#4590=CARTESIAN_POINT('',(-4.5,-0.225,1.387778780781E-16));+#4591=LINE('',#4583,#2064);+#4592=ORIENTED_EDGE('',*,*,#4593,.T.);+#4593=EDGE_CURVE('',#4589,#4594,#4596,.T.);+#4594=VERTEX_POINT('',#4595);+#4595=CARTESIAN_POINT('',(-4.5,-0.225,0.1));+#4596=LINE('',#4590,#188);+#4597=ORIENTED_EDGE('',*,*,#4598,.T.);+#4598=EDGE_CURVE('',#4594,#4599,#4601,.T.);+#4599=VERTEX_POINT('',#4600);+#4600=CARTESIAN_POINT('',(-4.079347141319,-0.225,0.1));+#4601=LINE('',#4595,#840);+#4602=ORIENTED_EDGE('',*,*,#4603,.T.);+#4603=EDGE_CURVE('',#4599,#4604,#4606,.T.);+#4604=VERTEX_POINT('',#4605);+#4605=CARTESIAN_POINT('',(-3.980866366018,-0.225,0.182635182233));+#4606=CIRCLE('',#4607,1.E-01);+#4607=AXIS2_PLACEMENT_3D('',#4586,#4110,#4111);+#4608=ORIENTED_EDGE('',*,*,#4609,.T.);+#4609=EDGE_CURVE('',#4604,#4610,#4612,.T.);+#4610=VERTEX_POINT('',#4611);+#4611=CARTESIAN_POINT('',(-3.896961550602,-0.225,0.684729635533));+#4612=LINE('',#4605,#4117);+#4613=ORIENTED_EDGE('',*,*,#4614,.T.);+#4614=EDGE_CURVE('',#4610,#4615,#4617,.T.);+#4615=VERTEX_POINT('',#4616);+#4616=CARTESIAN_POINT('',(-3.7,-0.225,0.85));+#4617=CIRCLE('',#4618,0.2);+#4618=AXIS2_PLACEMENT_3D('',#4565,#4124,#4125);+#4619=ORIENTED_EDGE('',*,*,#4620,.T.);+#4620=EDGE_CURVE('',#4615,#2202,#4621,.T.);+#4621=LINE('',#4616,#840);+#4622=PLANE('',#4623);+#4623=AXIS2_PLACEMENT_3D('',#4624,#2077,#13);+#4624=CARTESIAN_POINT('',(-3.914276639233,-0.225,0.410238158856));+#4625=ADVANCED_FACE('',(#4626),#846,.F.);+#4626=FACE_BOUND('',#4627,.F.);+#4627=EDGE_LOOP('',(#4628,#4629,#4633,#4634));+#4628=ORIENTED_EDGE('',*,*,#2214,.T.);+#4629=ORIENTED_EDGE('',*,*,#4630,.T.);+#4630=EDGE_CURVE('',#2209,#3105,#4631,.T.);+#4631=LINE('',#4632,#840);+#4632=CARTESIAN_POINT('',(-3.7,0.225,0.85));+#4633=ORIENTED_EDGE('',*,*,#3104,.F.);+#4634=ORIENTED_EDGE('',*,*,#4635,.F.);+#4635=EDGE_CURVE('',#2202,#3101,#4621,.T.);+#4636=ADVANCED_FACE('',(#4637),#4693,.F.);+#4637=FACE_BOUND('',#4638,.F.);+#4638=EDGE_LOOP('',(#4639,#4640,#4641,#4648,#4653,#4660,#4665,#4670,#4675,#4681,#4686,#4691));+#4639=ORIENTED_EDGE('',*,*,#2208,.F.);+#4640=ORIENTED_EDGE('',*,*,#2219,.T.);+#4641=ORIENTED_EDGE('',*,*,#4642,.T.);+#4642=EDGE_CURVE('',#2220,#4643,#4645,.T.);+#4643=VERTEX_POINT('',#4644);+#4644=CARTESIAN_POINT('',(-3.798480775301,0.225,0.667364817767));+#4645=CIRCLE('',#4646,0.1);+#4646=AXIS2_PLACEMENT_3D('',#4647,#4071,#4072);+#4647=CARTESIAN_POINT('',(-3.7,0.225,0.65));+#4648=ORIENTED_EDGE('',*,*,#4649,.T.);+#4649=EDGE_CURVE('',#4643,#4650,#4652,.T.);+#4650=VERTEX_POINT('',#4651);+#4651=CARTESIAN_POINT('',(-3.882385590716,0.225,0.165270364467));+#4652=LINE('',#4644,#4078);+#4653=ORIENTED_EDGE('',*,*,#4654,.T.);+#4654=EDGE_CURVE('',#4650,#4655,#4657,.T.);+#4655=VERTEX_POINT('',#4656);+#4656=CARTESIAN_POINT('',(-4.079347141319,0.225,1.387778780781E-16));+#4657=CIRCLE('',#4658,0.2);+#4658=AXIS2_PLACEMENT_3D('',#4659,#4087,#4088);+#4659=CARTESIAN_POINT('',(-4.079347141319,0.225,0.2));+#4660=ORIENTED_EDGE('',*,*,#4661,.T.);+#4661=EDGE_CURVE('',#4655,#4662,#4664,.T.);+#4662=VERTEX_POINT('',#4663);+#4663=CARTESIAN_POINT('',(-4.5,0.225,1.387778780781E-16));+#4664=LINE('',#4656,#2064);+#4665=ORIENTED_EDGE('',*,*,#4666,.T.);+#4666=EDGE_CURVE('',#4662,#4667,#4669,.T.);+#4667=VERTEX_POINT('',#4668);+#4668=CARTESIAN_POINT('',(-4.5,0.225,0.1));+#4669=LINE('',#4663,#188);+#4670=ORIENTED_EDGE('',*,*,#4671,.T.);+#4671=EDGE_CURVE('',#4667,#4672,#4674,.T.);+#4672=VERTEX_POINT('',#4673);+#4673=CARTESIAN_POINT('',(-4.079347141319,0.225,0.1));+#4674=LINE('',#4668,#840);+#4675=ORIENTED_EDGE('',*,*,#4676,.T.);+#4676=EDGE_CURVE('',#4672,#4677,#4679,.T.);+#4677=VERTEX_POINT('',#4678);+#4678=CARTESIAN_POINT('',(-3.980866366018,0.225,0.182635182233));+#4679=CIRCLE('',#4680,1.E-01);+#4680=AXIS2_PLACEMENT_3D('',#4659,#4110,#4111);+#4681=ORIENTED_EDGE('',*,*,#4682,.T.);+#4682=EDGE_CURVE('',#4677,#4683,#4685,.T.);+#4683=VERTEX_POINT('',#4684);+#4684=CARTESIAN_POINT('',(-3.896961550602,0.225,0.684729635533));+#4685=LINE('',#4678,#4117);+#4686=ORIENTED_EDGE('',*,*,#4687,.T.);+#4687=EDGE_CURVE('',#4683,#4688,#4689,.T.);+#4688=VERTEX_POINT('',#4632);+#4689=CIRCLE('',#4690,0.2);+#4690=AXIS2_PLACEMENT_3D('',#4647,#4124,#4125);+#4691=ORIENTED_EDGE('',*,*,#4692,.T.);+#4692=EDGE_CURVE('',#4688,#2209,#4631,.T.);+#4693=PLANE('',#4694);+#4694=AXIS2_PLACEMENT_3D('',#4695,#2077,#13);+#4695=CARTESIAN_POINT('',(-3.914276639233,0.225,0.410238158856));+#4696=ADVANCED_FACE('',(#4697),#4711,.F.);+#4697=FACE_BOUND('',#4698,.F.);+#4698=EDGE_LOOP('',(#4699,#4700,#4707,#4710));+#4699=ORIENTED_EDGE('',*,*,#2232,.T.);+#4700=ORIENTED_EDGE('',*,*,#4701,.T.);+#4701=EDGE_CURVE('',#2227,#4702,#4704,.T.);+#4702=VERTEX_POINT('',#4703);+#4703=CARTESIAN_POINT('',(-3.798480775301,0.575,0.667364817767));+#4704=CIRCLE('',#4705,0.1);+#4705=AXIS2_PLACEMENT_3D('',#4706,#4071,#4072);+#4706=CARTESIAN_POINT('',(-3.7,0.575,0.65));+#4707=ORIENTED_EDGE('',*,*,#4708,.F.);+#4708=EDGE_CURVE('',#4643,#4702,#4709,.T.);+#4709=LINE('',#4644,#2076);+#4710=ORIENTED_EDGE('',*,*,#4642,.F.);+#4711=CYLINDRICAL_SURFACE('',#4712,0.1);+#4712=AXIS2_PLACEMENT_3D('',#4647,#4148,#4072);+#4713=ADVANCED_FACE('',(#4714),#4763,.T.);+#4714=FACE_BOUND('',#4715,.T.);+#4715=EDGE_LOOP('',(#2239,#2225,#4700,#4716,#4721,#4728,#4733,#4738,#4743,#4749,#4754,#4760));+#4716=ORIENTED_EDGE('',*,*,#4717,.T.);+#4717=EDGE_CURVE('',#4702,#4718,#4720,.T.);+#4718=VERTEX_POINT('',#4719);+#4719=CARTESIAN_POINT('',(-3.882385590716,0.575,0.165270364467));+#4720=LINE('',#4703,#4078);+#4721=ORIENTED_EDGE('',*,*,#4722,.T.);+#4722=EDGE_CURVE('',#4718,#4723,#4725,.T.);+#4723=VERTEX_POINT('',#4724);+#4724=CARTESIAN_POINT('',(-4.079347141319,0.575,1.387778780781E-16));+#4725=CIRCLE('',#4726,0.2);+#4726=AXIS2_PLACEMENT_3D('',#4727,#4087,#4088);+#4727=CARTESIAN_POINT('',(-4.079347141319,0.575,0.2));+#4728=ORIENTED_EDGE('',*,*,#4729,.T.);+#4729=EDGE_CURVE('',#4723,#4730,#4732,.T.);+#4730=VERTEX_POINT('',#4731);+#4731=CARTESIAN_POINT('',(-4.5,0.575,1.387778780781E-16));+#4732=LINE('',#4724,#2064);+#4733=ORIENTED_EDGE('',*,*,#4734,.T.);+#4734=EDGE_CURVE('',#4730,#4735,#4737,.T.);+#4735=VERTEX_POINT('',#4736);+#4736=CARTESIAN_POINT('',(-4.5,0.575,0.1));+#4737=LINE('',#4731,#188);+#4738=ORIENTED_EDGE('',*,*,#4739,.T.);+#4739=EDGE_CURVE('',#4735,#4740,#4742,.T.);+#4740=VERTEX_POINT('',#4741);+#4741=CARTESIAN_POINT('',(-4.079347141319,0.575,0.1));+#4742=LINE('',#4736,#840);+#4743=ORIENTED_EDGE('',*,*,#4744,.T.);+#4744=EDGE_CURVE('',#4740,#4745,#4747,.T.);+#4745=VERTEX_POINT('',#4746);+#4746=CARTESIAN_POINT('',(-3.980866366018,0.575,0.182635182233));+#4747=CIRCLE('',#4748,1.E-01);+#4748=AXIS2_PLACEMENT_3D('',#4727,#4110,#4111);+#4749=ORIENTED_EDGE('',*,*,#4750,.T.);+#4750=EDGE_CURVE('',#4745,#4751,#4753,.T.);+#4751=VERTEX_POINT('',#4752);+#4752=CARTESIAN_POINT('',(-3.896961550602,0.575,0.684729635533));+#4753=LINE('',#4746,#4117);+#4754=ORIENTED_EDGE('',*,*,#4755,.T.);+#4755=EDGE_CURVE('',#4751,#4756,#4758,.T.);+#4756=VERTEX_POINT('',#4757);+#4757=CARTESIAN_POINT('',(-3.7,0.575,0.85));+#4758=CIRCLE('',#4759,0.2);+#4759=AXIS2_PLACEMENT_3D('',#4706,#4124,#4125);+#4760=ORIENTED_EDGE('',*,*,#4761,.T.);+#4761=EDGE_CURVE('',#4756,#2241,#4762,.T.);+#4762=LINE('',#4757,#840);+#4763=PLANE('',#4764);+#4764=AXIS2_PLACEMENT_3D('',#4765,#2077,#13);+#4765=CARTESIAN_POINT('',(-3.914276639233,0.575,0.410238158856));+#4766=ADVANCED_FACE('',(#4767),#846,.F.);+#4767=FACE_BOUND('',#4768,.F.);+#4768=EDGE_LOOP('',(#4769,#4770,#4774,#4775));+#4769=ORIENTED_EDGE('',*,*,#2253,.T.);+#4770=ORIENTED_EDGE('',*,*,#4771,.T.);+#4771=EDGE_CURVE('',#2248,#3113,#4772,.T.);+#4772=LINE('',#4773,#840);+#4773=CARTESIAN_POINT('',(-3.7,1.025,0.85));+#4774=ORIENTED_EDGE('',*,*,#3112,.F.);+#4775=ORIENTED_EDGE('',*,*,#4776,.F.);+#4776=EDGE_CURVE('',#2241,#3109,#4762,.T.);+#4777=ADVANCED_FACE('',(#4778),#4834,.F.);+#4778=FACE_BOUND('',#4779,.F.);+#4779=EDGE_LOOP('',(#4780,#4781,#4782,#4789,#4794,#4801,#4806,#4811,#4816,#4822,#4827,#4832));+#4780=ORIENTED_EDGE('',*,*,#2247,.F.);+#4781=ORIENTED_EDGE('',*,*,#2258,.T.);+#4782=ORIENTED_EDGE('',*,*,#4783,.T.);+#4783=EDGE_CURVE('',#2259,#4784,#4786,.T.);+#4784=VERTEX_POINT('',#4785);+#4785=CARTESIAN_POINT('',(-3.798480775301,1.025,0.667364817767));+#4786=CIRCLE('',#4787,0.1);+#4787=AXIS2_PLACEMENT_3D('',#4788,#4071,#4072);+#4788=CARTESIAN_POINT('',(-3.7,1.025,0.65));+#4789=ORIENTED_EDGE('',*,*,#4790,.T.);+#4790=EDGE_CURVE('',#4784,#4791,#4793,.T.);+#4791=VERTEX_POINT('',#4792);+#4792=CARTESIAN_POINT('',(-3.882385590716,1.025,0.165270364467));+#4793=LINE('',#4785,#4078);+#4794=ORIENTED_EDGE('',*,*,#4795,.T.);+#4795=EDGE_CURVE('',#4791,#4796,#4798,.T.);+#4796=VERTEX_POINT('',#4797);+#4797=CARTESIAN_POINT('',(-4.079347141319,1.025,1.387778780781E-16));+#4798=CIRCLE('',#4799,0.2);+#4799=AXIS2_PLACEMENT_3D('',#4800,#4087,#4088);+#4800=CARTESIAN_POINT('',(-4.079347141319,1.025,0.2));+#4801=ORIENTED_EDGE('',*,*,#4802,.T.);+#4802=EDGE_CURVE('',#4796,#4803,#4805,.T.);+#4803=VERTEX_POINT('',#4804);+#4804=CARTESIAN_POINT('',(-4.5,1.025,1.387778780781E-16));+#4805=LINE('',#4797,#2064);+#4806=ORIENTED_EDGE('',*,*,#4807,.T.);+#4807=EDGE_CURVE('',#4803,#4808,#4810,.T.);+#4808=VERTEX_POINT('',#4809);+#4809=CARTESIAN_POINT('',(-4.5,1.025,0.1));+#4810=LINE('',#4804,#188);+#4811=ORIENTED_EDGE('',*,*,#4812,.T.);+#4812=EDGE_CURVE('',#4808,#4813,#4815,.T.);+#4813=VERTEX_POINT('',#4814);+#4814=CARTESIAN_POINT('',(-4.079347141319,1.025,0.1));+#4815=LINE('',#4809,#840);+#4816=ORIENTED_EDGE('',*,*,#4817,.T.);+#4817=EDGE_CURVE('',#4813,#4818,#4820,.T.);+#4818=VERTEX_POINT('',#4819);+#4819=CARTESIAN_POINT('',(-3.980866366018,1.025,0.182635182233));+#4820=CIRCLE('',#4821,1.E-01);+#4821=AXIS2_PLACEMENT_3D('',#4800,#4110,#4111);+#4822=ORIENTED_EDGE('',*,*,#4823,.T.);+#4823=EDGE_CURVE('',#4818,#4824,#4826,.T.);+#4824=VERTEX_POINT('',#4825);+#4825=CARTESIAN_POINT('',(-3.896961550602,1.025,0.684729635533));+#4826=LINE('',#4819,#4117);+#4827=ORIENTED_EDGE('',*,*,#4828,.T.);+#4828=EDGE_CURVE('',#4824,#4829,#4830,.T.);+#4829=VERTEX_POINT('',#4773);+#4830=CIRCLE('',#4831,0.2);+#4831=AXIS2_PLACEMENT_3D('',#4788,#4124,#4125);+#4832=ORIENTED_EDGE('',*,*,#4833,.T.);+#4833=EDGE_CURVE('',#4829,#2248,#4772,.T.);+#4834=PLANE('',#4835);+#4835=AXIS2_PLACEMENT_3D('',#4836,#2077,#13);+#4836=CARTESIAN_POINT('',(-3.914276639233,1.025,0.410238158856));+#4837=ADVANCED_FACE('',(#4838),#4852,.F.);+#4838=FACE_BOUND('',#4839,.F.);+#4839=EDGE_LOOP('',(#4840,#4841,#4848,#4851));+#4840=ORIENTED_EDGE('',*,*,#2271,.T.);+#4841=ORIENTED_EDGE('',*,*,#4842,.T.);+#4842=EDGE_CURVE('',#2266,#4843,#4845,.T.);+#4843=VERTEX_POINT('',#4844);+#4844=CARTESIAN_POINT('',(-3.798480775301,1.375,0.667364817767));+#4845=CIRCLE('',#4846,0.1);+#4846=AXIS2_PLACEMENT_3D('',#4847,#4071,#4072);+#4847=CARTESIAN_POINT('',(-3.7,1.375,0.65));+#4848=ORIENTED_EDGE('',*,*,#4849,.F.);+#4849=EDGE_CURVE('',#4784,#4843,#4850,.T.);+#4850=LINE('',#4785,#2076);+#4851=ORIENTED_EDGE('',*,*,#4783,.F.);+#4852=CYLINDRICAL_SURFACE('',#4853,0.1);+#4853=AXIS2_PLACEMENT_3D('',#4788,#4148,#4072);+#4854=ADVANCED_FACE('',(#4855),#4904,.T.);+#4855=FACE_BOUND('',#4856,.T.);+#4856=EDGE_LOOP('',(#2278,#2264,#4841,#4857,#4862,#4869,#4874,#4879,#4884,#4890,#4895,#4901));+#4857=ORIENTED_EDGE('',*,*,#4858,.T.);+#4858=EDGE_CURVE('',#4843,#4859,#4861,.T.);+#4859=VERTEX_POINT('',#4860);+#4860=CARTESIAN_POINT('',(-3.882385590716,1.375,0.165270364467));+#4861=LINE('',#4844,#4078);+#4862=ORIENTED_EDGE('',*,*,#4863,.T.);+#4863=EDGE_CURVE('',#4859,#4864,#4866,.T.);+#4864=VERTEX_POINT('',#4865);+#4865=CARTESIAN_POINT('',(-4.079347141319,1.375,1.387778780781E-16));+#4866=CIRCLE('',#4867,0.2);+#4867=AXIS2_PLACEMENT_3D('',#4868,#4087,#4088);+#4868=CARTESIAN_POINT('',(-4.079347141319,1.375,0.2));+#4869=ORIENTED_EDGE('',*,*,#4870,.T.);+#4870=EDGE_CURVE('',#4864,#4871,#4873,.T.);+#4871=VERTEX_POINT('',#4872);+#4872=CARTESIAN_POINT('',(-4.5,1.375,1.387778780781E-16));+#4873=LINE('',#4865,#2064);+#4874=ORIENTED_EDGE('',*,*,#4875,.T.);+#4875=EDGE_CURVE('',#4871,#4876,#4878,.T.);+#4876=VERTEX_POINT('',#4877);+#4877=CARTESIAN_POINT('',(-4.5,1.375,0.1));+#4878=LINE('',#4872,#188);+#4879=ORIENTED_EDGE('',*,*,#4880,.T.);+#4880=EDGE_CURVE('',#4876,#4881,#4883,.T.);+#4881=VERTEX_POINT('',#4882);+#4882=CARTESIAN_POINT('',(-4.079347141319,1.375,0.1));+#4883=LINE('',#4877,#840);+#4884=ORIENTED_EDGE('',*,*,#4885,.T.);+#4885=EDGE_CURVE('',#4881,#4886,#4888,.T.);+#4886=VERTEX_POINT('',#4887);+#4887=CARTESIAN_POINT('',(-3.980866366018,1.375,0.182635182233));+#4888=CIRCLE('',#4889,1.E-01);+#4889=AXIS2_PLACEMENT_3D('',#4868,#4110,#4111);+#4890=ORIENTED_EDGE('',*,*,#4891,.T.);+#4891=EDGE_CURVE('',#4886,#4892,#4894,.T.);+#4892=VERTEX_POINT('',#4893);+#4893=CARTESIAN_POINT('',(-3.896961550602,1.375,0.684729635533));+#4894=LINE('',#4887,#4117);+#4895=ORIENTED_EDGE('',*,*,#4896,.T.);+#4896=EDGE_CURVE('',#4892,#4897,#4899,.T.);+#4897=VERTEX_POINT('',#4898);+#4898=CARTESIAN_POINT('',(-3.7,1.375,0.85));+#4899=CIRCLE('',#4900,0.2);+#4900=AXIS2_PLACEMENT_3D('',#4847,#4124,#4125);+#4901=ORIENTED_EDGE('',*,*,#4902,.T.);+#4902=EDGE_CURVE('',#4897,#2280,#4903,.T.);+#4903=LINE('',#4898,#840);+#4904=PLANE('',#4905);+#4905=AXIS2_PLACEMENT_3D('',#4906,#2077,#13);+#4906=CARTESIAN_POINT('',(-3.914276639233,1.375,0.410238158856));+#4907=ADVANCED_FACE('',(#4908),#846,.F.);+#4908=FACE_BOUND('',#4909,.F.);+#4909=EDGE_LOOP('',(#4910,#4911,#4915,#4916));+#4910=ORIENTED_EDGE('',*,*,#2292,.T.);+#4911=ORIENTED_EDGE('',*,*,#4912,.T.);+#4912=EDGE_CURVE('',#2287,#3121,#4913,.T.);+#4913=LINE('',#4914,#840);+#4914=CARTESIAN_POINT('',(-3.7,1.825,0.85));+#4915=ORIENTED_EDGE('',*,*,#3120,.F.);+#4916=ORIENTED_EDGE('',*,*,#4917,.F.);+#4917=EDGE_CURVE('',#2280,#3117,#4903,.T.);+#4918=ADVANCED_FACE('',(#4919),#4975,.F.);+#4919=FACE_BOUND('',#4920,.F.);+#4920=EDGE_LOOP('',(#4921,#4922,#4923,#4930,#4935,#4942,#4947,#4952,#4957,#4963,#4968,#4973));+#4921=ORIENTED_EDGE('',*,*,#2286,.F.);+#4922=ORIENTED_EDGE('',*,*,#2297,.T.);+#4923=ORIENTED_EDGE('',*,*,#4924,.T.);+#4924=EDGE_CURVE('',#2298,#4925,#4927,.T.);+#4925=VERTEX_POINT('',#4926);+#4926=CARTESIAN_POINT('',(-3.798480775301,1.825,0.667364817767));+#4927=CIRCLE('',#4928,0.1);+#4928=AXIS2_PLACEMENT_3D('',#4929,#4071,#4072);+#4929=CARTESIAN_POINT('',(-3.7,1.825,0.65));+#4930=ORIENTED_EDGE('',*,*,#4931,.T.);+#4931=EDGE_CURVE('',#4925,#4932,#4934,.T.);+#4932=VERTEX_POINT('',#4933);+#4933=CARTESIAN_POINT('',(-3.882385590716,1.825,0.165270364467));+#4934=LINE('',#4926,#4078);+#4935=ORIENTED_EDGE('',*,*,#4936,.T.);+#4936=EDGE_CURVE('',#4932,#4937,#4939,.T.);+#4937=VERTEX_POINT('',#4938);+#4938=CARTESIAN_POINT('',(-4.079347141319,1.825,1.387778780781E-16));+#4939=CIRCLE('',#4940,0.2);+#4940=AXIS2_PLACEMENT_3D('',#4941,#4087,#4088);+#4941=CARTESIAN_POINT('',(-4.079347141319,1.825,0.2));+#4942=ORIENTED_EDGE('',*,*,#4943,.T.);+#4943=EDGE_CURVE('',#4937,#4944,#4946,.T.);+#4944=VERTEX_POINT('',#4945);+#4945=CARTESIAN_POINT('',(-4.5,1.825,1.387778780781E-16));+#4946=LINE('',#4938,#2064);+#4947=ORIENTED_EDGE('',*,*,#4948,.T.);+#4948=EDGE_CURVE('',#4944,#4949,#4951,.T.);+#4949=VERTEX_POINT('',#4950);+#4950=CARTESIAN_POINT('',(-4.5,1.825,0.1));+#4951=LINE('',#4945,#188);+#4952=ORIENTED_EDGE('',*,*,#4953,.T.);+#4953=EDGE_CURVE('',#4949,#4954,#4956,.T.);+#4954=VERTEX_POINT('',#4955);+#4955=CARTESIAN_POINT('',(-4.079347141319,1.825,0.1));+#4956=LINE('',#4950,#840);+#4957=ORIENTED_EDGE('',*,*,#4958,.T.);+#4958=EDGE_CURVE('',#4954,#4959,#4961,.T.);+#4959=VERTEX_POINT('',#4960);+#4960=CARTESIAN_POINT('',(-3.980866366018,1.825,0.182635182233));+#4961=CIRCLE('',#4962,1.E-01);+#4962=AXIS2_PLACEMENT_3D('',#4941,#4110,#4111);+#4963=ORIENTED_EDGE('',*,*,#4964,.T.);+#4964=EDGE_CURVE('',#4959,#4965,#4967,.T.);+#4965=VERTEX_POINT('',#4966);+#4966=CARTESIAN_POINT('',(-3.896961550602,1.825,0.684729635533));+#4967=LINE('',#4960,#4117);+#4968=ORIENTED_EDGE('',*,*,#4969,.T.);+#4969=EDGE_CURVE('',#4965,#4970,#4971,.T.);+#4970=VERTEX_POINT('',#4914);+#4971=CIRCLE('',#4972,0.2);+#4972=AXIS2_PLACEMENT_3D('',#4929,#4124,#4125);+#4973=ORIENTED_EDGE('',*,*,#4974,.T.);+#4974=EDGE_CURVE('',#4970,#2287,#4913,.T.);+#4975=PLANE('',#4976);+#4976=AXIS2_PLACEMENT_3D('',#4977,#2077,#13);+#4977=CARTESIAN_POINT('',(-3.914276639233,1.825,0.410238158856));+#4978=ADVANCED_FACE('',(#4979),#4993,.F.);+#4979=FACE_BOUND('',#4980,.F.);+#4980=EDGE_LOOP('',(#4981,#4982,#4989,#4992));+#4981=ORIENTED_EDGE('',*,*,#2310,.T.);+#4982=ORIENTED_EDGE('',*,*,#4983,.T.);+#4983=EDGE_CURVE('',#2305,#4984,#4986,.T.);+#4984=VERTEX_POINT('',#4985);+#4985=CARTESIAN_POINT('',(-3.798480775301,2.175,0.667364817767));+#4986=CIRCLE('',#4987,0.1);+#4987=AXIS2_PLACEMENT_3D('',#4988,#4071,#4072);+#4988=CARTESIAN_POINT('',(-3.7,2.175,0.65));+#4989=ORIENTED_EDGE('',*,*,#4990,.F.);+#4990=EDGE_CURVE('',#4925,#4984,#4991,.T.);+#4991=LINE('',#4926,#2076);+#4992=ORIENTED_EDGE('',*,*,#4924,.F.);+#4993=CYLINDRICAL_SURFACE('',#4994,0.1);+#4994=AXIS2_PLACEMENT_3D('',#4929,#4148,#4072);+#4995=ADVANCED_FACE('',(#4996),#5045,.T.);+#4996=FACE_BOUND('',#4997,.T.);+#4997=EDGE_LOOP('',(#2317,#2303,#4982,#4998,#5003,#5010,#5015,#5020,#5025,#5031,#5036,#5042));+#4998=ORIENTED_EDGE('',*,*,#4999,.T.);+#4999=EDGE_CURVE('',#4984,#5000,#5002,.T.);+#5000=VERTEX_POINT('',#5001);+#5001=CARTESIAN_POINT('',(-3.882385590716,2.175,0.165270364467));+#5002=LINE('',#4985,#4078);+#5003=ORIENTED_EDGE('',*,*,#5004,.T.);+#5004=EDGE_CURVE('',#5000,#5005,#5007,.T.);+#5005=VERTEX_POINT('',#5006);+#5006=CARTESIAN_POINT('',(-4.079347141319,2.175,1.387778780781E-16));+#5007=CIRCLE('',#5008,0.2);+#5008=AXIS2_PLACEMENT_3D('',#5009,#4087,#4088);+#5009=CARTESIAN_POINT('',(-4.079347141319,2.175,0.2));+#5010=ORIENTED_EDGE('',*,*,#5011,.T.);+#5011=EDGE_CURVE('',#5005,#5012,#5014,.T.);+#5012=VERTEX_POINT('',#5013);+#5013=CARTESIAN_POINT('',(-4.5,2.175,1.387778780781E-16));+#5014=LINE('',#5006,#2064);+#5015=ORIENTED_EDGE('',*,*,#5016,.T.);+#5016=EDGE_CURVE('',#5012,#5017,#5019,.T.);+#5017=VERTEX_POINT('',#5018);+#5018=CARTESIAN_POINT('',(-4.5,2.175,0.1));+#5019=LINE('',#5013,#188);+#5020=ORIENTED_EDGE('',*,*,#5021,.T.);+#5021=EDGE_CURVE('',#5017,#5022,#5024,.T.);+#5022=VERTEX_POINT('',#5023);+#5023=CARTESIAN_POINT('',(-4.079347141319,2.175,0.1));+#5024=LINE('',#5018,#840);+#5025=ORIENTED_EDGE('',*,*,#5026,.T.);+#5026=EDGE_CURVE('',#5022,#5027,#5029,.T.);+#5027=VERTEX_POINT('',#5028);+#5028=CARTESIAN_POINT('',(-3.980866366018,2.175,0.182635182233));+#5029=CIRCLE('',#5030,1.E-01);+#5030=AXIS2_PLACEMENT_3D('',#5009,#4110,#4111);+#5031=ORIENTED_EDGE('',*,*,#5032,.T.);+#5032=EDGE_CURVE('',#5027,#5033,#5035,.T.);+#5033=VERTEX_POINT('',#5034);+#5034=CARTESIAN_POINT('',(-3.896961550602,2.175,0.684729635533));+#5035=LINE('',#5028,#4117);+#5036=ORIENTED_EDGE('',*,*,#5037,.T.);+#5037=EDGE_CURVE('',#5033,#5038,#5040,.T.);+#5038=VERTEX_POINT('',#5039);+#5039=CARTESIAN_POINT('',(-3.7,2.175,0.85));+#5040=CIRCLE('',#5041,0.2);+#5041=AXIS2_PLACEMENT_3D('',#4988,#4124,#4125);+#5042=ORIENTED_EDGE('',*,*,#5043,.T.);+#5043=EDGE_CURVE('',#5038,#2319,#5044,.T.);+#5044=LINE('',#5039,#840);+#5045=PLANE('',#5046);+#5046=AXIS2_PLACEMENT_3D('',#5047,#2077,#13);+#5047=CARTESIAN_POINT('',(-3.914276639233,2.175,0.410238158856));+#5048=ADVANCED_FACE('',(#5049),#846,.F.);+#5049=FACE_BOUND('',#5050,.F.);+#5050=EDGE_LOOP('',(#5051,#5052,#5053,#5054));+#5051=ORIENTED_EDGE('',*,*,#2331,.T.);+#5052=ORIENTED_EDGE('',*,*,#3063,.T.);+#5053=ORIENTED_EDGE('',*,*,#3128,.F.);+#5054=ORIENTED_EDGE('',*,*,#5055,.F.);+#5055=EDGE_CURVE('',#2319,#3125,#5044,.T.);+#5056=ADVANCED_FACE('',(#5057),#5111,.F.);+#5057=FACE_BOUND('',#5058,.F.);+#5058=EDGE_LOOP('',(#5059,#5060,#5061,#5068,#5073,#5080,#5085,#5090,#5095,#5101,#5106,#5110));+#5059=ORIENTED_EDGE('',*,*,#2325,.F.);+#5060=ORIENTED_EDGE('',*,*,#2336,.T.);+#5061=ORIENTED_EDGE('',*,*,#5062,.T.);+#5062=EDGE_CURVE('',#2337,#5063,#5065,.T.);+#5063=VERTEX_POINT('',#5064);+#5064=CARTESIAN_POINT('',(-3.798480775301,2.625,0.667364817767));+#5065=CIRCLE('',#5066,0.1);+#5066=AXIS2_PLACEMENT_3D('',#5067,#4071,#4072);+#5067=CARTESIAN_POINT('',(-3.7,2.625,0.65));+#5068=ORIENTED_EDGE('',*,*,#5069,.T.);+#5069=EDGE_CURVE('',#5063,#5070,#5072,.T.);+#5070=VERTEX_POINT('',#5071);+#5071=CARTESIAN_POINT('',(-3.882385590716,2.625,0.165270364467));+#5072=LINE('',#5064,#4078);+#5073=ORIENTED_EDGE('',*,*,#5074,.T.);+#5074=EDGE_CURVE('',#5070,#5075,#5077,.T.);+#5075=VERTEX_POINT('',#5076);+#5076=CARTESIAN_POINT('',(-4.079347141319,2.625,1.387778780781E-16));+#5077=CIRCLE('',#5078,0.2);+#5078=AXIS2_PLACEMENT_3D('',#5079,#4087,#4088);+#5079=CARTESIAN_POINT('',(-4.079347141319,2.625,0.2));+#5080=ORIENTED_EDGE('',*,*,#5081,.T.);+#5081=EDGE_CURVE('',#5075,#5082,#5084,.T.);+#5082=VERTEX_POINT('',#5083);+#5083=CARTESIAN_POINT('',(-4.5,2.625,1.387778780781E-16));+#5084=LINE('',#5076,#2064);+#5085=ORIENTED_EDGE('',*,*,#5086,.T.);+#5086=EDGE_CURVE('',#5082,#5087,#5089,.T.);+#5087=VERTEX_POINT('',#5088);+#5088=CARTESIAN_POINT('',(-4.5,2.625,0.1));+#5089=LINE('',#5083,#188);+#5090=ORIENTED_EDGE('',*,*,#5091,.T.);+#5091=EDGE_CURVE('',#5087,#5092,#5094,.T.);+#5092=VERTEX_POINT('',#5093);+#5093=CARTESIAN_POINT('',(-4.079347141319,2.625,0.1));+#5094=LINE('',#5088,#840);+#5095=ORIENTED_EDGE('',*,*,#5096,.T.);+#5096=EDGE_CURVE('',#5092,#5097,#5099,.T.);+#5097=VERTEX_POINT('',#5098);+#5098=CARTESIAN_POINT('',(-3.980866366018,2.625,0.182635182233));+#5099=CIRCLE('',#5100,1.E-01);+#5100=AXIS2_PLACEMENT_3D('',#5079,#4110,#4111);+#5101=ORIENTED_EDGE('',*,*,#5102,.T.);+#5102=EDGE_CURVE('',#5097,#5103,#5105,.T.);+#5103=VERTEX_POINT('',#5104);+#5104=CARTESIAN_POINT('',(-3.896961550602,2.625,0.684729635533));+#5105=LINE('',#5098,#4117);+#5106=ORIENTED_EDGE('',*,*,#5107,.T.);+#5107=EDGE_CURVE('',#5103,#3048,#5108,.T.);+#5108=CIRCLE('',#5109,0.2);+#5109=AXIS2_PLACEMENT_3D('',#5067,#4124,#4125);+#5110=ORIENTED_EDGE('',*,*,#3047,.T.);+#5111=PLANE('',#5112);+#5112=AXIS2_PLACEMENT_3D('',#5113,#2077,#13);+#5113=CARTESIAN_POINT('',(-3.914276639233,2.625,0.410238158856));+#5114=ADVANCED_FACE('',(#5115),#5129,.F.);+#5115=FACE_BOUND('',#5116,.F.);+#5116=EDGE_LOOP('',(#5117,#5118,#5125,#5128));+#5117=ORIENTED_EDGE('',*,*,#2349,.T.);+#5118=ORIENTED_EDGE('',*,*,#5119,.T.);+#5119=EDGE_CURVE('',#2344,#5120,#5122,.T.);+#5120=VERTEX_POINT('',#5121);+#5121=CARTESIAN_POINT('',(-3.798480775301,2.975,0.667364817767));+#5122=CIRCLE('',#5123,0.1);+#5123=AXIS2_PLACEMENT_3D('',#5124,#4071,#4072);+#5124=CARTESIAN_POINT('',(-3.7,2.975,0.65));+#5125=ORIENTED_EDGE('',*,*,#5126,.F.);+#5126=EDGE_CURVE('',#5063,#5120,#5127,.T.);+#5127=LINE('',#5064,#2076);+#5128=ORIENTED_EDGE('',*,*,#5062,.F.);+#5129=CYLINDRICAL_SURFACE('',#5130,0.1);+#5130=AXIS2_PLACEMENT_3D('',#5067,#4148,#4072);+#5131=ADVANCED_FACE('',(#5132),#5176,.T.);+#5132=FACE_BOUND('',#5133,.T.);+#5133=EDGE_LOOP('',(#2356,#2342,#5118,#5134,#5139,#5146,#5151,#5156,#5161,#5167,#5172,#3055));+#5134=ORIENTED_EDGE('',*,*,#5135,.T.);+#5135=EDGE_CURVE('',#5120,#5136,#5138,.T.);+#5136=VERTEX_POINT('',#5137);+#5137=CARTESIAN_POINT('',(-3.882385590716,2.975,0.165270364467));+#5138=LINE('',#5121,#4078);+#5139=ORIENTED_EDGE('',*,*,#5140,.T.);+#5140=EDGE_CURVE('',#5136,#5141,#5143,.T.);+#5141=VERTEX_POINT('',#5142);+#5142=CARTESIAN_POINT('',(-4.079347141319,2.975,1.387778780781E-16));+#5143=CIRCLE('',#5144,0.2);+#5144=AXIS2_PLACEMENT_3D('',#5145,#4087,#4088);+#5145=CARTESIAN_POINT('',(-4.079347141319,2.975,0.2));+#5146=ORIENTED_EDGE('',*,*,#5147,.T.);+#5147=EDGE_CURVE('',#5141,#5148,#5150,.T.);+#5148=VERTEX_POINT('',#5149);+#5149=CARTESIAN_POINT('',(-4.5,2.975,1.387778780781E-16));+#5150=LINE('',#5142,#2064);+#5151=ORIENTED_EDGE('',*,*,#5152,.T.);+#5152=EDGE_CURVE('',#5148,#5153,#5155,.T.);+#5153=VERTEX_POINT('',#5154);+#5154=CARTESIAN_POINT('',(-4.5,2.975,0.1));+#5155=LINE('',#5149,#188);+#5156=ORIENTED_EDGE('',*,*,#5157,.T.);+#5157=EDGE_CURVE('',#5153,#5158,#5160,.T.);+#5158=VERTEX_POINT('',#5159);+#5159=CARTESIAN_POINT('',(-4.079347141319,2.975,0.1));+#5160=LINE('',#5154,#840);+#5161=ORIENTED_EDGE('',*,*,#5162,.T.);+#5162=EDGE_CURVE('',#5158,#5163,#5165,.T.);+#5163=VERTEX_POINT('',#5164);+#5164=CARTESIAN_POINT('',(-3.980866366018,2.975,0.182635182233));+#5165=CIRCLE('',#5166,1.E-01);+#5166=AXIS2_PLACEMENT_3D('',#5145,#4110,#4111);+#5167=ORIENTED_EDGE('',*,*,#5168,.T.);+#5168=EDGE_CURVE('',#5163,#5169,#5171,.T.);+#5169=VERTEX_POINT('',#5170);+#5170=CARTESIAN_POINT('',(-3.896961550602,2.975,0.684729635533));+#5171=LINE('',#5164,#4117);+#5172=ORIENTED_EDGE('',*,*,#5173,.T.);+#5173=EDGE_CURVE('',#5169,#3053,#5174,.T.);+#5174=CIRCLE('',#5175,0.2);+#5175=AXIS2_PLACEMENT_3D('',#5124,#4124,#4125);+#5176=PLANE('',#5177);+#5177=AXIS2_PLACEMENT_3D('',#5178,#2077,#13);+#5178=CARTESIAN_POINT('',(-3.914276639233,2.975,0.410238158856));+#5179=ADVANCED_FACE('',(#5180),#5242,.F.);+#5180=FACE_BOUND('',#5181,.F.);+#5181=EDGE_LOOP('',(#5182,#5183,#5184,#5192,#5199,#5207,#5212,#5217,#5222,#5229,#5236,#5241));+#5182=ORIENTED_EDGE('',*,*,#2369,.F.);+#5183=ORIENTED_EDGE('',*,*,#2379,.T.);+#5184=ORIENTED_EDGE('',*,*,#5185,.T.);+#5185=EDGE_CURVE('',#2380,#5186,#5188,.T.);+#5186=VERTEX_POINT('',#5187);+#5187=CARTESIAN_POINT('',(3.798480775301,2.975,0.667364817767));+#5188=CIRCLE('',#5189,0.1);+#5189=AXIS2_PLACEMENT_3D('',#5190,#151,#5191);+#5190=CARTESIAN_POINT('',(3.7,2.975,0.65));+#5191=DIRECTION('',(4.440892098501E-15,4.930380657631E-31,1.));+#5192=ORIENTED_EDGE('',*,*,#5193,.T.);+#5193=EDGE_CURVE('',#5186,#5194,#5196,.T.);+#5194=VERTEX_POINT('',#5195);+#5195=CARTESIAN_POINT('',(3.882385590716,2.975,0.165270364467));+#5196=LINE('',#5187,#5197);+#5197=VECTOR('',#5198,1.);+#5198=DIRECTION('',(0.16482406317,1.829914699438E-17,-0.986322983713));+#5199=ORIENTED_EDGE('',*,*,#5200,.T.);+#5200=EDGE_CURVE('',#5194,#5201,#5203,.T.);+#5201=VERTEX_POINT('',#5202);+#5202=CARTESIAN_POINT('',(4.079347141319,2.975,1.387778780781E-16));+#5203=CIRCLE('',#5204,0.2);+#5204=AXIS2_PLACEMENT_3D('',#5205,#123,#5206);+#5205=CARTESIAN_POINT('',(4.079347141319,2.975,0.2));+#5206=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#5207=ORIENTED_EDGE('',*,*,#5208,.T.);+#5208=EDGE_CURVE('',#5201,#5209,#5211,.T.);+#5209=VERTEX_POINT('',#5210);+#5210=CARTESIAN_POINT('',(4.5,2.975,1.387778780781E-16));+#5211=LINE('',#5202,#27);+#5212=ORIENTED_EDGE('',*,*,#5213,.T.);+#5213=EDGE_CURVE('',#5209,#5214,#5216,.T.);+#5214=VERTEX_POINT('',#5215);+#5215=CARTESIAN_POINT('',(4.5,2.975,0.1));+#5216=LINE('',#5210,#188);+#5217=ORIENTED_EDGE('',*,*,#5218,.T.);+#5218=EDGE_CURVE('',#5214,#5219,#5221,.T.);+#5219=VERTEX_POINT('',#5220);+#5220=CARTESIAN_POINT('',(4.079347141319,2.975,0.1));+#5221=LINE('',#5215,#136);+#5222=ORIENTED_EDGE('',*,*,#5223,.T.);+#5223=EDGE_CURVE('',#5219,#5224,#5226,.T.);+#5224=VERTEX_POINT('',#5225);+#5225=CARTESIAN_POINT('',(3.980866366018,2.975,0.182635182233));+#5226=CIRCLE('',#5227,1.E-01);+#5227=AXIS2_PLACEMENT_3D('',#5205,#151,#5228);+#5228=DIRECTION('',(8.881784197001E-15,9.860761315263E-31,-1.));+#5229=ORIENTED_EDGE('',*,*,#5230,.T.);+#5230=EDGE_CURVE('',#5224,#5231,#5233,.T.);+#5231=VERTEX_POINT('',#5232);+#5232=CARTESIAN_POINT('',(3.896961550602,2.975,0.684729635533));+#5233=LINE('',#5225,#5234);+#5234=VECTOR('',#5235,1.);+#5235=DIRECTION('',(-0.16482406317,-1.829914699438E-17,0.986322983713));+#5236=ORIENTED_EDGE('',*,*,#5237,.T.);+#5237=EDGE_CURVE('',#5231,#4016,#5238,.T.);+#5238=CIRCLE('',#5239,0.2);+#5239=AXIS2_PLACEMENT_3D('',#5190,#123,#5240);+#5240=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#5241=ORIENTED_EDGE('',*,*,#4015,.T.);+#5242=PLANE('',#5243);+#5243=AXIS2_PLACEMENT_3D('',#5244,#123,#13);+#5244=CARTESIAN_POINT('',(3.914276639233,2.975,0.410238158856));+#5245=ADVANCED_FACE('',(#5246),#5260,.F.);+#5246=FACE_BOUND('',#5247,.F.);+#5247=EDGE_LOOP('',(#5248,#5249,#5256,#5259));+#5248=ORIENTED_EDGE('',*,*,#2392,.T.);+#5249=ORIENTED_EDGE('',*,*,#5250,.T.);+#5250=EDGE_CURVE('',#2387,#5251,#5253,.T.);+#5251=VERTEX_POINT('',#5252);+#5252=CARTESIAN_POINT('',(3.798480775301,2.625,0.667364817767));+#5253=CIRCLE('',#5254,0.1);+#5254=AXIS2_PLACEMENT_3D('',#5255,#151,#5191);+#5255=CARTESIAN_POINT('',(3.7,2.625,0.65));+#5256=ORIENTED_EDGE('',*,*,#5257,.F.);+#5257=EDGE_CURVE('',#5186,#5251,#5258,.T.);+#5258=LINE('',#5187,#122);+#5259=ORIENTED_EDGE('',*,*,#5185,.F.);+#5260=CYLINDRICAL_SURFACE('',#5189,0.1);+#5261=ADVANCED_FACE('',(#5262),#5306,.T.);+#5262=FACE_BOUND('',#5263,.T.);+#5263=EDGE_LOOP('',(#2399,#2385,#5249,#5264,#5269,#5276,#5281,#5286,#5291,#5297,#5302,#4022));+#5264=ORIENTED_EDGE('',*,*,#5265,.T.);+#5265=EDGE_CURVE('',#5251,#5266,#5268,.T.);+#5266=VERTEX_POINT('',#5267);+#5267=CARTESIAN_POINT('',(3.882385590716,2.625,0.165270364467));+#5268=LINE('',#5252,#5197);+#5269=ORIENTED_EDGE('',*,*,#5270,.T.);+#5270=EDGE_CURVE('',#5266,#5271,#5273,.T.);+#5271=VERTEX_POINT('',#5272);+#5272=CARTESIAN_POINT('',(4.079347141319,2.625,1.387778780781E-16));+#5273=CIRCLE('',#5274,0.2);+#5274=AXIS2_PLACEMENT_3D('',#5275,#123,#5206);+#5275=CARTESIAN_POINT('',(4.079347141319,2.625,0.2));+#5276=ORIENTED_EDGE('',*,*,#5277,.T.);+#5277=EDGE_CURVE('',#5271,#5278,#5280,.T.);+#5278=VERTEX_POINT('',#5279);+#5279=CARTESIAN_POINT('',(4.5,2.625,1.387778780781E-16));+#5280=LINE('',#5272,#27);+#5281=ORIENTED_EDGE('',*,*,#5282,.T.);+#5282=EDGE_CURVE('',#5278,#5283,#5285,.T.);+#5283=VERTEX_POINT('',#5284);+#5284=CARTESIAN_POINT('',(4.5,2.625,0.1));+#5285=LINE('',#5279,#188);+#5286=ORIENTED_EDGE('',*,*,#5287,.T.);+#5287=EDGE_CURVE('',#5283,#5288,#5290,.T.);+#5288=VERTEX_POINT('',#5289);+#5289=CARTESIAN_POINT('',(4.079347141319,2.625,0.1));+#5290=LINE('',#5284,#136);+#5291=ORIENTED_EDGE('',*,*,#5292,.T.);+#5292=EDGE_CURVE('',#5288,#5293,#5295,.T.);+#5293=VERTEX_POINT('',#5294);+#5294=CARTESIAN_POINT('',(3.980866366018,2.625,0.182635182233));+#5295=CIRCLE('',#5296,1.E-01);+#5296=AXIS2_PLACEMENT_3D('',#5275,#151,#5228);+#5297=ORIENTED_EDGE('',*,*,#5298,.T.);+#5298=EDGE_CURVE('',#5293,#5299,#5301,.T.);+#5299=VERTEX_POINT('',#5300);+#5300=CARTESIAN_POINT('',(3.896961550602,2.625,0.684729635533));+#5301=LINE('',#5294,#5234);+#5302=ORIENTED_EDGE('',*,*,#5303,.T.);+#5303=EDGE_CURVE('',#5299,#4019,#5304,.T.);+#5304=CIRCLE('',#5305,0.2);+#5305=AXIS2_PLACEMENT_3D('',#5255,#123,#5240);+#5306=PLANE('',#5307);+#5307=AXIS2_PLACEMENT_3D('',#5308,#123,#13);+#5308=CARTESIAN_POINT('',(3.914276639233,2.625,0.410238158856));+#5309=ADVANCED_FACE('',(#5310),#846,.F.);+#5310=FACE_BOUND('',#5311,.F.);+#5311=EDGE_LOOP('',(#5312,#5313,#5314,#5318));+#5312=ORIENTED_EDGE('',*,*,#4026,.F.);+#5313=ORIENTED_EDGE('',*,*,#2413,.T.);+#5314=ORIENTED_EDGE('',*,*,#5315,.T.);+#5315=EDGE_CURVE('',#2408,#3943,#5316,.T.);+#5316=LINE('',#5317,#136);+#5317=CARTESIAN_POINT('',(3.7,2.175,0.85));+#5318=ORIENTED_EDGE('',*,*,#3942,.F.);+#5319=ADVANCED_FACE('',(#5320),#5376,.F.);+#5320=FACE_BOUND('',#5321,.F.);+#5321=EDGE_LOOP('',(#5322,#5323,#5324,#5331,#5336,#5343,#5348,#5353,#5358,#5364,#5369,#5374));+#5322=ORIENTED_EDGE('',*,*,#2407,.F.);+#5323=ORIENTED_EDGE('',*,*,#2418,.T.);+#5324=ORIENTED_EDGE('',*,*,#5325,.T.);+#5325=EDGE_CURVE('',#2419,#5326,#5328,.T.);+#5326=VERTEX_POINT('',#5327);+#5327=CARTESIAN_POINT('',(3.798480775301,2.175,0.667364817767));+#5328=CIRCLE('',#5329,0.1);+#5329=AXIS2_PLACEMENT_3D('',#5330,#151,#5191);+#5330=CARTESIAN_POINT('',(3.7,2.175,0.65));+#5331=ORIENTED_EDGE('',*,*,#5332,.T.);+#5332=EDGE_CURVE('',#5326,#5333,#5335,.T.);+#5333=VERTEX_POINT('',#5334);+#5334=CARTESIAN_POINT('',(3.882385590716,2.175,0.165270364467));+#5335=LINE('',#5327,#5197);+#5336=ORIENTED_EDGE('',*,*,#5337,.T.);+#5337=EDGE_CURVE('',#5333,#5338,#5340,.T.);+#5338=VERTEX_POINT('',#5339);+#5339=CARTESIAN_POINT('',(4.079347141319,2.175,1.387778780781E-16));+#5340=CIRCLE('',#5341,0.2);+#5341=AXIS2_PLACEMENT_3D('',#5342,#123,#5206);+#5342=CARTESIAN_POINT('',(4.079347141319,2.175,0.2));+#5343=ORIENTED_EDGE('',*,*,#5344,.T.);+#5344=EDGE_CURVE('',#5338,#5345,#5347,.T.);+#5345=VERTEX_POINT('',#5346);+#5346=CARTESIAN_POINT('',(4.5,2.175,1.387778780781E-16));+#5347=LINE('',#5339,#27);+#5348=ORIENTED_EDGE('',*,*,#5349,.T.);+#5349=EDGE_CURVE('',#5345,#5350,#5352,.T.);+#5350=VERTEX_POINT('',#5351);+#5351=CARTESIAN_POINT('',(4.5,2.175,0.1));+#5352=LINE('',#5346,#188);+#5353=ORIENTED_EDGE('',*,*,#5354,.T.);+#5354=EDGE_CURVE('',#5350,#5355,#5357,.T.);+#5355=VERTEX_POINT('',#5356);+#5356=CARTESIAN_POINT('',(4.079347141319,2.175,0.1));+#5357=LINE('',#5351,#136);+#5358=ORIENTED_EDGE('',*,*,#5359,.T.);+#5359=EDGE_CURVE('',#5355,#5360,#5362,.T.);+#5360=VERTEX_POINT('',#5361);+#5361=CARTESIAN_POINT('',(3.980866366018,2.175,0.182635182233));+#5362=CIRCLE('',#5363,1.E-01);+#5363=AXIS2_PLACEMENT_3D('',#5342,#151,#5228);+#5364=ORIENTED_EDGE('',*,*,#5365,.T.);+#5365=EDGE_CURVE('',#5360,#5366,#5368,.T.);+#5366=VERTEX_POINT('',#5367);+#5367=CARTESIAN_POINT('',(3.896961550602,2.175,0.684729635533));+#5368=LINE('',#5361,#5234);+#5369=ORIENTED_EDGE('',*,*,#5370,.T.);+#5370=EDGE_CURVE('',#5366,#5371,#5372,.T.);+#5371=VERTEX_POINT('',#5317);+#5372=CIRCLE('',#5373,0.2);+#5373=AXIS2_PLACEMENT_3D('',#5330,#123,#5240);+#5374=ORIENTED_EDGE('',*,*,#5375,.T.);+#5375=EDGE_CURVE('',#5371,#2408,#5316,.T.);+#5376=PLANE('',#5377);+#5377=AXIS2_PLACEMENT_3D('',#5378,#123,#13);+#5378=CARTESIAN_POINT('',(3.914276639233,2.175,0.410238158856));+#5379=ADVANCED_FACE('',(#5380),#5394,.F.);+#5380=FACE_BOUND('',#5381,.F.);+#5381=EDGE_LOOP('',(#5382,#5383,#5390,#5393));+#5382=ORIENTED_EDGE('',*,*,#2431,.T.);+#5383=ORIENTED_EDGE('',*,*,#5384,.T.);+#5384=EDGE_CURVE('',#2426,#5385,#5387,.T.);+#5385=VERTEX_POINT('',#5386);+#5386=CARTESIAN_POINT('',(3.798480775301,1.825,0.667364817767));+#5387=CIRCLE('',#5388,0.1);+#5388=AXIS2_PLACEMENT_3D('',#5389,#151,#5191);+#5389=CARTESIAN_POINT('',(3.7,1.825,0.65));+#5390=ORIENTED_EDGE('',*,*,#5391,.F.);+#5391=EDGE_CURVE('',#5326,#5385,#5392,.T.);+#5392=LINE('',#5327,#122);+#5393=ORIENTED_EDGE('',*,*,#5325,.F.);+#5394=CYLINDRICAL_SURFACE('',#5329,0.1);+#5395=ADVANCED_FACE('',(#5396),#5445,.T.);+#5396=FACE_BOUND('',#5397,.T.);+#5397=EDGE_LOOP('',(#2438,#2424,#5383,#5398,#5403,#5410,#5415,#5420,#5425,#5431,#5436,#5442));+#5398=ORIENTED_EDGE('',*,*,#5399,.T.);+#5399=EDGE_CURVE('',#5385,#5400,#5402,.T.);+#5400=VERTEX_POINT('',#5401);+#5401=CARTESIAN_POINT('',(3.882385590716,1.825,0.165270364467));+#5402=LINE('',#5386,#5197);+#5403=ORIENTED_EDGE('',*,*,#5404,.T.);+#5404=EDGE_CURVE('',#5400,#5405,#5407,.T.);+#5405=VERTEX_POINT('',#5406);+#5406=CARTESIAN_POINT('',(4.079347141319,1.825,1.387778780781E-16));+#5407=CIRCLE('',#5408,0.2);+#5408=AXIS2_PLACEMENT_3D('',#5409,#123,#5206);+#5409=CARTESIAN_POINT('',(4.079347141319,1.825,0.2));+#5410=ORIENTED_EDGE('',*,*,#5411,.T.);+#5411=EDGE_CURVE('',#5405,#5412,#5414,.T.);+#5412=VERTEX_POINT('',#5413);+#5413=CARTESIAN_POINT('',(4.5,1.825,1.387778780781E-16));+#5414=LINE('',#5406,#27);+#5415=ORIENTED_EDGE('',*,*,#5416,.T.);+#5416=EDGE_CURVE('',#5412,#5417,#5419,.T.);+#5417=VERTEX_POINT('',#5418);+#5418=CARTESIAN_POINT('',(4.5,1.825,0.1));+#5419=LINE('',#5413,#188);+#5420=ORIENTED_EDGE('',*,*,#5421,.T.);+#5421=EDGE_CURVE('',#5417,#5422,#5424,.T.);+#5422=VERTEX_POINT('',#5423);+#5423=CARTESIAN_POINT('',(4.079347141319,1.825,0.1));+#5424=LINE('',#5418,#136);+#5425=ORIENTED_EDGE('',*,*,#5426,.T.);+#5426=EDGE_CURVE('',#5422,#5427,#5429,.T.);+#5427=VERTEX_POINT('',#5428);+#5428=CARTESIAN_POINT('',(3.980866366018,1.825,0.182635182233));+#5429=CIRCLE('',#5430,1.E-01);+#5430=AXIS2_PLACEMENT_3D('',#5409,#151,#5228);+#5431=ORIENTED_EDGE('',*,*,#5432,.T.);+#5432=EDGE_CURVE('',#5427,#5433,#5435,.T.);+#5433=VERTEX_POINT('',#5434);+#5434=CARTESIAN_POINT('',(3.896961550602,1.825,0.684729635533));+#5435=LINE('',#5428,#5234);+#5436=ORIENTED_EDGE('',*,*,#5437,.T.);+#5437=EDGE_CURVE('',#5433,#5438,#5440,.T.);+#5438=VERTEX_POINT('',#5439);+#5439=CARTESIAN_POINT('',(3.7,1.825,0.85));+#5440=CIRCLE('',#5441,0.2);+#5441=AXIS2_PLACEMENT_3D('',#5389,#123,#5240);+#5442=ORIENTED_EDGE('',*,*,#5443,.T.);+#5443=EDGE_CURVE('',#5438,#2440,#5444,.T.);+#5444=LINE('',#5439,#136);+#5445=PLANE('',#5446);+#5446=AXIS2_PLACEMENT_3D('',#5447,#123,#13);+#5447=CARTESIAN_POINT('',(3.914276639233,1.825,0.410238158856));+#5448=ADVANCED_FACE('',(#5449),#846,.F.);+#5449=FACE_BOUND('',#5450,.F.);+#5450=EDGE_LOOP('',(#5451,#5453,#5454,#5458));+#5451=ORIENTED_EDGE('',*,*,#5452,.F.);+#5452=EDGE_CURVE('',#2440,#3947,#5444,.T.);+#5453=ORIENTED_EDGE('',*,*,#2452,.T.);+#5454=ORIENTED_EDGE('',*,*,#5455,.T.);+#5455=EDGE_CURVE('',#2447,#3951,#5456,.T.);+#5456=LINE('',#5457,#136);+#5457=CARTESIAN_POINT('',(3.7,1.375,0.85));+#5458=ORIENTED_EDGE('',*,*,#3950,.F.);+#5459=ADVANCED_FACE('',(#5460),#5516,.F.);+#5460=FACE_BOUND('',#5461,.F.);+#5461=EDGE_LOOP('',(#5462,#5463,#5464,#5471,#5476,#5483,#5488,#5493,#5498,#5504,#5509,#5514));+#5462=ORIENTED_EDGE('',*,*,#2446,.F.);+#5463=ORIENTED_EDGE('',*,*,#2457,.T.);+#5464=ORIENTED_EDGE('',*,*,#5465,.T.);+#5465=EDGE_CURVE('',#2458,#5466,#5468,.T.);+#5466=VERTEX_POINT('',#5467);+#5467=CARTESIAN_POINT('',(3.798480775301,1.375,0.667364817767));+#5468=CIRCLE('',#5469,0.1);+#5469=AXIS2_PLACEMENT_3D('',#5470,#151,#5191);+#5470=CARTESIAN_POINT('',(3.7,1.375,0.65));+#5471=ORIENTED_EDGE('',*,*,#5472,.T.);+#5472=EDGE_CURVE('',#5466,#5473,#5475,.T.);+#5473=VERTEX_POINT('',#5474);+#5474=CARTESIAN_POINT('',(3.882385590716,1.375,0.165270364467));+#5475=LINE('',#5467,#5197);+#5476=ORIENTED_EDGE('',*,*,#5477,.T.);+#5477=EDGE_CURVE('',#5473,#5478,#5480,.T.);+#5478=VERTEX_POINT('',#5479);+#5479=CARTESIAN_POINT('',(4.079347141319,1.375,1.387778780781E-16));+#5480=CIRCLE('',#5481,0.2);+#5481=AXIS2_PLACEMENT_3D('',#5482,#123,#5206);+#5482=CARTESIAN_POINT('',(4.079347141319,1.375,0.2));+#5483=ORIENTED_EDGE('',*,*,#5484,.T.);+#5484=EDGE_CURVE('',#5478,#5485,#5487,.T.);+#5485=VERTEX_POINT('',#5486);+#5486=CARTESIAN_POINT('',(4.5,1.375,1.387778780781E-16));+#5487=LINE('',#5479,#27);+#5488=ORIENTED_EDGE('',*,*,#5489,.T.);+#5489=EDGE_CURVE('',#5485,#5490,#5492,.T.);+#5490=VERTEX_POINT('',#5491);+#5491=CARTESIAN_POINT('',(4.5,1.375,0.1));+#5492=LINE('',#5486,#188);+#5493=ORIENTED_EDGE('',*,*,#5494,.T.);+#5494=EDGE_CURVE('',#5490,#5495,#5497,.T.);+#5495=VERTEX_POINT('',#5496);+#5496=CARTESIAN_POINT('',(4.079347141319,1.375,0.1));+#5497=LINE('',#5491,#136);+#5498=ORIENTED_EDGE('',*,*,#5499,.T.);+#5499=EDGE_CURVE('',#5495,#5500,#5502,.T.);+#5500=VERTEX_POINT('',#5501);+#5501=CARTESIAN_POINT('',(3.980866366018,1.375,0.182635182233));+#5502=CIRCLE('',#5503,1.E-01);+#5503=AXIS2_PLACEMENT_3D('',#5482,#151,#5228);+#5504=ORIENTED_EDGE('',*,*,#5505,.T.);+#5505=EDGE_CURVE('',#5500,#5506,#5508,.T.);+#5506=VERTEX_POINT('',#5507);+#5507=CARTESIAN_POINT('',(3.896961550602,1.375,0.684729635533));+#5508=LINE('',#5501,#5234);+#5509=ORIENTED_EDGE('',*,*,#5510,.T.);+#5510=EDGE_CURVE('',#5506,#5511,#5512,.T.);+#5511=VERTEX_POINT('',#5457);+#5512=CIRCLE('',#5513,0.2);+#5513=AXIS2_PLACEMENT_3D('',#5470,#123,#5240);+#5514=ORIENTED_EDGE('',*,*,#5515,.T.);+#5515=EDGE_CURVE('',#5511,#2447,#5456,.T.);+#5516=PLANE('',#5517);+#5517=AXIS2_PLACEMENT_3D('',#5518,#123,#13);+#5518=CARTESIAN_POINT('',(3.914276639233,1.375,0.410238158856));+#5519=ADVANCED_FACE('',(#5520),#5534,.F.);+#5520=FACE_BOUND('',#5521,.F.);+#5521=EDGE_LOOP('',(#5522,#5523,#5530,#5533));+#5522=ORIENTED_EDGE('',*,*,#2470,.T.);+#5523=ORIENTED_EDGE('',*,*,#5524,.T.);+#5524=EDGE_CURVE('',#2465,#5525,#5527,.T.);+#5525=VERTEX_POINT('',#5526);+#5526=CARTESIAN_POINT('',(3.798480775301,1.025,0.667364817767));+#5527=CIRCLE('',#5528,0.1);+#5528=AXIS2_PLACEMENT_3D('',#5529,#151,#5191);+#5529=CARTESIAN_POINT('',(3.7,1.025,0.65));+#5530=ORIENTED_EDGE('',*,*,#5531,.F.);+#5531=EDGE_CURVE('',#5466,#5525,#5532,.T.);+#5532=LINE('',#5467,#122);+#5533=ORIENTED_EDGE('',*,*,#5465,.F.);+#5534=CYLINDRICAL_SURFACE('',#5469,0.1);+#5535=ADVANCED_FACE('',(#5536),#5585,.T.);+#5536=FACE_BOUND('',#5537,.T.);+#5537=EDGE_LOOP('',(#2477,#2463,#5523,#5538,#5543,#5550,#5555,#5560,#5565,#5571,#5576,#5582));+#5538=ORIENTED_EDGE('',*,*,#5539,.T.);+#5539=EDGE_CURVE('',#5525,#5540,#5542,.T.);+#5540=VERTEX_POINT('',#5541);+#5541=CARTESIAN_POINT('',(3.882385590716,1.025,0.165270364467));+#5542=LINE('',#5526,#5197);+#5543=ORIENTED_EDGE('',*,*,#5544,.T.);+#5544=EDGE_CURVE('',#5540,#5545,#5547,.T.);+#5545=VERTEX_POINT('',#5546);+#5546=CARTESIAN_POINT('',(4.079347141319,1.025,1.387778780781E-16));+#5547=CIRCLE('',#5548,0.2);+#5548=AXIS2_PLACEMENT_3D('',#5549,#123,#5206);+#5549=CARTESIAN_POINT('',(4.079347141319,1.025,0.2));+#5550=ORIENTED_EDGE('',*,*,#5551,.T.);+#5551=EDGE_CURVE('',#5545,#5552,#5554,.T.);+#5552=VERTEX_POINT('',#5553);+#5553=CARTESIAN_POINT('',(4.5,1.025,1.387778780781E-16));+#5554=LINE('',#5546,#27);+#5555=ORIENTED_EDGE('',*,*,#5556,.T.);+#5556=EDGE_CURVE('',#5552,#5557,#5559,.T.);+#5557=VERTEX_POINT('',#5558);+#5558=CARTESIAN_POINT('',(4.5,1.025,0.1));+#5559=LINE('',#5553,#188);+#5560=ORIENTED_EDGE('',*,*,#5561,.T.);+#5561=EDGE_CURVE('',#5557,#5562,#5564,.T.);+#5562=VERTEX_POINT('',#5563);+#5563=CARTESIAN_POINT('',(4.079347141319,1.025,0.1));+#5564=LINE('',#5558,#136);+#5565=ORIENTED_EDGE('',*,*,#5566,.T.);+#5566=EDGE_CURVE('',#5562,#5567,#5569,.T.);+#5567=VERTEX_POINT('',#5568);+#5568=CARTESIAN_POINT('',(3.980866366018,1.025,0.182635182233));+#5569=CIRCLE('',#5570,1.E-01);+#5570=AXIS2_PLACEMENT_3D('',#5549,#151,#5228);+#5571=ORIENTED_EDGE('',*,*,#5572,.T.);+#5572=EDGE_CURVE('',#5567,#5573,#5575,.T.);+#5573=VERTEX_POINT('',#5574);+#5574=CARTESIAN_POINT('',(3.896961550602,1.025,0.684729635533));+#5575=LINE('',#5568,#5234);+#5576=ORIENTED_EDGE('',*,*,#5577,.T.);+#5577=EDGE_CURVE('',#5573,#5578,#5580,.T.);+#5578=VERTEX_POINT('',#5579);+#5579=CARTESIAN_POINT('',(3.7,1.025,0.85));+#5580=CIRCLE('',#5581,0.2);+#5581=AXIS2_PLACEMENT_3D('',#5529,#123,#5240);+#5582=ORIENTED_EDGE('',*,*,#5583,.T.);+#5583=EDGE_CURVE('',#5578,#2479,#5584,.T.);+#5584=LINE('',#5579,#136);+#5585=PLANE('',#5586);+#5586=AXIS2_PLACEMENT_3D('',#5587,#123,#13);+#5587=CARTESIAN_POINT('',(3.914276639233,1.025,0.410238158856));+#5588=ADVANCED_FACE('',(#5589),#846,.F.);+#5589=FACE_BOUND('',#5590,.F.);+#5590=EDGE_LOOP('',(#5591,#5593,#5594,#5598));+#5591=ORIENTED_EDGE('',*,*,#5592,.F.);+#5592=EDGE_CURVE('',#2479,#3955,#5584,.T.);+#5593=ORIENTED_EDGE('',*,*,#2491,.T.);+#5594=ORIENTED_EDGE('',*,*,#5595,.T.);+#5595=EDGE_CURVE('',#2486,#3959,#5596,.T.);+#5596=LINE('',#5597,#136);+#5597=CARTESIAN_POINT('',(3.7,0.575,0.85));+#5598=ORIENTED_EDGE('',*,*,#3958,.F.);+#5599=ADVANCED_FACE('',(#5600),#5656,.F.);+#5600=FACE_BOUND('',#5601,.F.);+#5601=EDGE_LOOP('',(#5602,#5603,#5604,#5611,#5616,#5623,#5628,#5633,#5638,#5644,#5649,#5654));+#5602=ORIENTED_EDGE('',*,*,#2485,.F.);+#5603=ORIENTED_EDGE('',*,*,#2496,.T.);+#5604=ORIENTED_EDGE('',*,*,#5605,.T.);+#5605=EDGE_CURVE('',#2497,#5606,#5608,.T.);+#5606=VERTEX_POINT('',#5607);+#5607=CARTESIAN_POINT('',(3.798480775301,0.575,0.667364817767));+#5608=CIRCLE('',#5609,0.1);+#5609=AXIS2_PLACEMENT_3D('',#5610,#151,#5191);+#5610=CARTESIAN_POINT('',(3.7,0.575,0.65));+#5611=ORIENTED_EDGE('',*,*,#5612,.T.);+#5612=EDGE_CURVE('',#5606,#5613,#5615,.T.);+#5613=VERTEX_POINT('',#5614);+#5614=CARTESIAN_POINT('',(3.882385590716,0.575,0.165270364467));+#5615=LINE('',#5607,#5197);+#5616=ORIENTED_EDGE('',*,*,#5617,.T.);+#5617=EDGE_CURVE('',#5613,#5618,#5620,.T.);+#5618=VERTEX_POINT('',#5619);+#5619=CARTESIAN_POINT('',(4.079347141319,0.575,1.387778780781E-16));+#5620=CIRCLE('',#5621,0.2);+#5621=AXIS2_PLACEMENT_3D('',#5622,#123,#5206);+#5622=CARTESIAN_POINT('',(4.079347141319,0.575,0.2));+#5623=ORIENTED_EDGE('',*,*,#5624,.T.);+#5624=EDGE_CURVE('',#5618,#5625,#5627,.T.);+#5625=VERTEX_POINT('',#5626);+#5626=CARTESIAN_POINT('',(4.5,0.575,1.387778780781E-16));+#5627=LINE('',#5619,#27);+#5628=ORIENTED_EDGE('',*,*,#5629,.T.);+#5629=EDGE_CURVE('',#5625,#5630,#5632,.T.);+#5630=VERTEX_POINT('',#5631);+#5631=CARTESIAN_POINT('',(4.5,0.575,0.1));+#5632=LINE('',#5626,#188);+#5633=ORIENTED_EDGE('',*,*,#5634,.T.);+#5634=EDGE_CURVE('',#5630,#5635,#5637,.T.);+#5635=VERTEX_POINT('',#5636);+#5636=CARTESIAN_POINT('',(4.079347141319,0.575,0.1));+#5637=LINE('',#5631,#136);+#5638=ORIENTED_EDGE('',*,*,#5639,.T.);+#5639=EDGE_CURVE('',#5635,#5640,#5642,.T.);+#5640=VERTEX_POINT('',#5641);+#5641=CARTESIAN_POINT('',(3.980866366018,0.575,0.182635182233));+#5642=CIRCLE('',#5643,1.E-01);+#5643=AXIS2_PLACEMENT_3D('',#5622,#151,#5228);+#5644=ORIENTED_EDGE('',*,*,#5645,.T.);+#5645=EDGE_CURVE('',#5640,#5646,#5648,.T.);+#5646=VERTEX_POINT('',#5647);+#5647=CARTESIAN_POINT('',(3.896961550602,0.575,0.684729635533));+#5648=LINE('',#5641,#5234);+#5649=ORIENTED_EDGE('',*,*,#5650,.T.);+#5650=EDGE_CURVE('',#5646,#5651,#5652,.T.);+#5651=VERTEX_POINT('',#5597);+#5652=CIRCLE('',#5653,0.2);+#5653=AXIS2_PLACEMENT_3D('',#5610,#123,#5240);+#5654=ORIENTED_EDGE('',*,*,#5655,.T.);+#5655=EDGE_CURVE('',#5651,#2486,#5596,.T.);+#5656=PLANE('',#5657);+#5657=AXIS2_PLACEMENT_3D('',#5658,#123,#13);+#5658=CARTESIAN_POINT('',(3.914276639233,0.575,0.410238158856));+#5659=ADVANCED_FACE('',(#5660),#5674,.F.);+#5660=FACE_BOUND('',#5661,.F.);+#5661=EDGE_LOOP('',(#5662,#5663,#5670,#5673));+#5662=ORIENTED_EDGE('',*,*,#2509,.T.);+#5663=ORIENTED_EDGE('',*,*,#5664,.T.);+#5664=EDGE_CURVE('',#2504,#5665,#5667,.T.);+#5665=VERTEX_POINT('',#5666);+#5666=CARTESIAN_POINT('',(3.798480775301,0.225,0.667364817767));+#5667=CIRCLE('',#5668,0.1);+#5668=AXIS2_PLACEMENT_3D('',#5669,#151,#5191);+#5669=CARTESIAN_POINT('',(3.7,0.225,0.65));+#5670=ORIENTED_EDGE('',*,*,#5671,.F.);+#5671=EDGE_CURVE('',#5606,#5665,#5672,.T.);+#5672=LINE('',#5607,#122);+#5673=ORIENTED_EDGE('',*,*,#5605,.F.);+#5674=CYLINDRICAL_SURFACE('',#5609,0.1);+#5675=ADVANCED_FACE('',(#5676),#5725,.T.);+#5676=FACE_BOUND('',#5677,.T.);+#5677=EDGE_LOOP('',(#2516,#2502,#5663,#5678,#5683,#5690,#5695,#5700,#5705,#5711,#5716,#5722));+#5678=ORIENTED_EDGE('',*,*,#5679,.T.);+#5679=EDGE_CURVE('',#5665,#5680,#5682,.T.);+#5680=VERTEX_POINT('',#5681);+#5681=CARTESIAN_POINT('',(3.882385590716,0.225,0.165270364467));+#5682=LINE('',#5666,#5197);+#5683=ORIENTED_EDGE('',*,*,#5684,.T.);+#5684=EDGE_CURVE('',#5680,#5685,#5687,.T.);+#5685=VERTEX_POINT('',#5686);+#5686=CARTESIAN_POINT('',(4.079347141319,0.225,1.387778780781E-16));+#5687=CIRCLE('',#5688,0.2);+#5688=AXIS2_PLACEMENT_3D('',#5689,#123,#5206);+#5689=CARTESIAN_POINT('',(4.079347141319,0.225,0.2));+#5690=ORIENTED_EDGE('',*,*,#5691,.T.);+#5691=EDGE_CURVE('',#5685,#5692,#5694,.T.);+#5692=VERTEX_POINT('',#5693);+#5693=CARTESIAN_POINT('',(4.5,0.225,1.387778780781E-16));+#5694=LINE('',#5686,#27);+#5695=ORIENTED_EDGE('',*,*,#5696,.T.);+#5696=EDGE_CURVE('',#5692,#5697,#5699,.T.);+#5697=VERTEX_POINT('',#5698);+#5698=CARTESIAN_POINT('',(4.5,0.225,0.1));+#5699=LINE('',#5693,#188);+#5700=ORIENTED_EDGE('',*,*,#5701,.T.);+#5701=EDGE_CURVE('',#5697,#5702,#5704,.T.);+#5702=VERTEX_POINT('',#5703);+#5703=CARTESIAN_POINT('',(4.079347141319,0.225,0.1));+#5704=LINE('',#5698,#136);+#5705=ORIENTED_EDGE('',*,*,#5706,.T.);+#5706=EDGE_CURVE('',#5702,#5707,#5709,.T.);+#5707=VERTEX_POINT('',#5708);+#5708=CARTESIAN_POINT('',(3.980866366018,0.225,0.182635182233));+#5709=CIRCLE('',#5710,1.E-01);+#5710=AXIS2_PLACEMENT_3D('',#5689,#151,#5228);+#5711=ORIENTED_EDGE('',*,*,#5712,.T.);+#5712=EDGE_CURVE('',#5707,#5713,#5715,.T.);+#5713=VERTEX_POINT('',#5714);+#5714=CARTESIAN_POINT('',(3.896961550602,0.225,0.684729635533));+#5715=LINE('',#5708,#5234);+#5716=ORIENTED_EDGE('',*,*,#5717,.T.);+#5717=EDGE_CURVE('',#5713,#5718,#5720,.T.);+#5718=VERTEX_POINT('',#5719);+#5719=CARTESIAN_POINT('',(3.7,0.225,0.85));+#5720=CIRCLE('',#5721,0.2);+#5721=AXIS2_PLACEMENT_3D('',#5669,#123,#5240);+#5722=ORIENTED_EDGE('',*,*,#5723,.T.);+#5723=EDGE_CURVE('',#5718,#2518,#5724,.T.);+#5724=LINE('',#5719,#136);+#5725=PLANE('',#5726);+#5726=AXIS2_PLACEMENT_3D('',#5727,#123,#13);+#5727=CARTESIAN_POINT('',(3.914276639233,0.225,0.410238158856));+#5728=ADVANCED_FACE('',(#5729),#846,.F.);+#5729=FACE_BOUND('',#5730,.F.);+#5730=EDGE_LOOP('',(#5731,#5733,#5734,#5738));+#5731=ORIENTED_EDGE('',*,*,#5732,.F.);+#5732=EDGE_CURVE('',#2518,#3963,#5724,.T.);+#5733=ORIENTED_EDGE('',*,*,#2530,.T.);+#5734=ORIENTED_EDGE('',*,*,#5735,.T.);+#5735=EDGE_CURVE('',#2525,#3967,#5736,.T.);+#5736=LINE('',#5737,#136);+#5737=CARTESIAN_POINT('',(3.7,-0.225,0.85));+#5738=ORIENTED_EDGE('',*,*,#3966,.F.);+#5739=ADVANCED_FACE('',(#5740),#5796,.F.);+#5740=FACE_BOUND('',#5741,.F.);+#5741=EDGE_LOOP('',(#5742,#5743,#5744,#5751,#5756,#5763,#5768,#5773,#5778,#5784,#5789,#5794));+#5742=ORIENTED_EDGE('',*,*,#2524,.F.);+#5743=ORIENTED_EDGE('',*,*,#2535,.T.);+#5744=ORIENTED_EDGE('',*,*,#5745,.T.);+#5745=EDGE_CURVE('',#2536,#5746,#5748,.T.);+#5746=VERTEX_POINT('',#5747);+#5747=CARTESIAN_POINT('',(3.798480775301,-0.225,0.667364817767));+#5748=CIRCLE('',#5749,0.1);+#5749=AXIS2_PLACEMENT_3D('',#5750,#151,#5191);+#5750=CARTESIAN_POINT('',(3.7,-0.225,0.65));+#5751=ORIENTED_EDGE('',*,*,#5752,.T.);+#5752=EDGE_CURVE('',#5746,#5753,#5755,.T.);+#5753=VERTEX_POINT('',#5754);+#5754=CARTESIAN_POINT('',(3.882385590716,-0.225,0.165270364467));+#5755=LINE('',#5747,#5197);+#5756=ORIENTED_EDGE('',*,*,#5757,.T.);+#5757=EDGE_CURVE('',#5753,#5758,#5760,.T.);+#5758=VERTEX_POINT('',#5759);+#5759=CARTESIAN_POINT('',(4.079347141319,-0.225,1.387778780781E-16));+#5760=CIRCLE('',#5761,0.2);+#5761=AXIS2_PLACEMENT_3D('',#5762,#123,#5206);+#5762=CARTESIAN_POINT('',(4.079347141319,-0.225,0.2));+#5763=ORIENTED_EDGE('',*,*,#5764,.T.);+#5764=EDGE_CURVE('',#5758,#5765,#5767,.T.);+#5765=VERTEX_POINT('',#5766);+#5766=CARTESIAN_POINT('',(4.5,-0.225,1.387778780781E-16));+#5767=LINE('',#5759,#27);+#5768=ORIENTED_EDGE('',*,*,#5769,.T.);+#5769=EDGE_CURVE('',#5765,#5770,#5772,.T.);+#5770=VERTEX_POINT('',#5771);+#5771=CARTESIAN_POINT('',(4.5,-0.225,0.1));+#5772=LINE('',#5766,#188);+#5773=ORIENTED_EDGE('',*,*,#5774,.T.);+#5774=EDGE_CURVE('',#5770,#5775,#5777,.T.);+#5775=VERTEX_POINT('',#5776);+#5776=CARTESIAN_POINT('',(4.079347141319,-0.225,0.1));+#5777=LINE('',#5771,#136);+#5778=ORIENTED_EDGE('',*,*,#5779,.T.);+#5779=EDGE_CURVE('',#5775,#5780,#5782,.T.);+#5780=VERTEX_POINT('',#5781);+#5781=CARTESIAN_POINT('',(3.980866366018,-0.225,0.182635182233));+#5782=CIRCLE('',#5783,1.E-01);+#5783=AXIS2_PLACEMENT_3D('',#5762,#151,#5228);+#5784=ORIENTED_EDGE('',*,*,#5785,.T.);+#5785=EDGE_CURVE('',#5780,#5786,#5788,.T.);+#5786=VERTEX_POINT('',#5787);+#5787=CARTESIAN_POINT('',(3.896961550602,-0.225,0.684729635533));+#5788=LINE('',#5781,#5234);+#5789=ORIENTED_EDGE('',*,*,#5790,.T.);+#5790=EDGE_CURVE('',#5786,#5791,#5792,.T.);+#5791=VERTEX_POINT('',#5737);+#5792=CIRCLE('',#5793,0.2);+#5793=AXIS2_PLACEMENT_3D('',#5750,#123,#5240);+#5794=ORIENTED_EDGE('',*,*,#5795,.T.);+#5795=EDGE_CURVE('',#5791,#2525,#5736,.T.);+#5796=PLANE('',#5797);+#5797=AXIS2_PLACEMENT_3D('',#5798,#123,#13);+#5798=CARTESIAN_POINT('',(3.914276639233,-0.225,0.410238158856));+#5799=ADVANCED_FACE('',(#5800),#5814,.F.);+#5800=FACE_BOUND('',#5801,.F.);+#5801=EDGE_LOOP('',(#5802,#5803,#5810,#5813));+#5802=ORIENTED_EDGE('',*,*,#2548,.T.);+#5803=ORIENTED_EDGE('',*,*,#5804,.T.);+#5804=EDGE_CURVE('',#2543,#5805,#5807,.T.);+#5805=VERTEX_POINT('',#5806);+#5806=CARTESIAN_POINT('',(3.798480775301,-0.575,0.667364817767));+#5807=CIRCLE('',#5808,0.1);+#5808=AXIS2_PLACEMENT_3D('',#5809,#151,#5191);+#5809=CARTESIAN_POINT('',(3.7,-0.575,0.65));+#5810=ORIENTED_EDGE('',*,*,#5811,.F.);+#5811=EDGE_CURVE('',#5746,#5805,#5812,.T.);+#5812=LINE('',#5747,#122);+#5813=ORIENTED_EDGE('',*,*,#5745,.F.);+#5814=CYLINDRICAL_SURFACE('',#5749,0.1);+#5815=ADVANCED_FACE('',(#5816),#5865,.T.);+#5816=FACE_BOUND('',#5817,.T.);+#5817=EDGE_LOOP('',(#2555,#2541,#5803,#5818,#5823,#5830,#5835,#5840,#5845,#5851,#5856,#5862));+#5818=ORIENTED_EDGE('',*,*,#5819,.T.);+#5819=EDGE_CURVE('',#5805,#5820,#5822,.T.);+#5820=VERTEX_POINT('',#5821);+#5821=CARTESIAN_POINT('',(3.882385590716,-0.575,0.165270364467));+#5822=LINE('',#5806,#5197);+#5823=ORIENTED_EDGE('',*,*,#5824,.T.);+#5824=EDGE_CURVE('',#5820,#5825,#5827,.T.);+#5825=VERTEX_POINT('',#5826);+#5826=CARTESIAN_POINT('',(4.079347141319,-0.575,1.387778780781E-16));+#5827=CIRCLE('',#5828,0.2);+#5828=AXIS2_PLACEMENT_3D('',#5829,#123,#5206);+#5829=CARTESIAN_POINT('',(4.079347141319,-0.575,0.2));+#5830=ORIENTED_EDGE('',*,*,#5831,.T.);+#5831=EDGE_CURVE('',#5825,#5832,#5834,.T.);+#5832=VERTEX_POINT('',#5833);+#5833=CARTESIAN_POINT('',(4.5,-0.575,1.387778780781E-16));+#5834=LINE('',#5826,#27);+#5835=ORIENTED_EDGE('',*,*,#5836,.T.);+#5836=EDGE_CURVE('',#5832,#5837,#5839,.T.);+#5837=VERTEX_POINT('',#5838);+#5838=CARTESIAN_POINT('',(4.5,-0.575,0.1));+#5839=LINE('',#5833,#188);+#5840=ORIENTED_EDGE('',*,*,#5841,.T.);+#5841=EDGE_CURVE('',#5837,#5842,#5844,.T.);+#5842=VERTEX_POINT('',#5843);+#5843=CARTESIAN_POINT('',(4.079347141319,-0.575,0.1));+#5844=LINE('',#5838,#136);+#5845=ORIENTED_EDGE('',*,*,#5846,.T.);+#5846=EDGE_CURVE('',#5842,#5847,#5849,.T.);+#5847=VERTEX_POINT('',#5848);+#5848=CARTESIAN_POINT('',(3.980866366018,-0.575,0.182635182233));+#5849=CIRCLE('',#5850,1.E-01);+#5850=AXIS2_PLACEMENT_3D('',#5829,#151,#5228);+#5851=ORIENTED_EDGE('',*,*,#5852,.T.);+#5852=EDGE_CURVE('',#5847,#5853,#5855,.T.);+#5853=VERTEX_POINT('',#5854);+#5854=CARTESIAN_POINT('',(3.896961550602,-0.575,0.684729635533));+#5855=LINE('',#5848,#5234);+#5856=ORIENTED_EDGE('',*,*,#5857,.T.);+#5857=EDGE_CURVE('',#5853,#5858,#5860,.T.);+#5858=VERTEX_POINT('',#5859);+#5859=CARTESIAN_POINT('',(3.7,-0.575,0.85));+#5860=CIRCLE('',#5861,0.2);+#5861=AXIS2_PLACEMENT_3D('',#5809,#123,#5240);+#5862=ORIENTED_EDGE('',*,*,#5863,.T.);+#5863=EDGE_CURVE('',#5858,#2557,#5864,.T.);+#5864=LINE('',#5859,#136);+#5865=PLANE('',#5866);+#5866=AXIS2_PLACEMENT_3D('',#5867,#123,#13);+#5867=CARTESIAN_POINT('',(3.914276639233,-0.575,0.410238158856));+#5868=ADVANCED_FACE('',(#5869),#846,.F.);+#5869=FACE_BOUND('',#5870,.F.);+#5870=EDGE_LOOP('',(#5871,#5873,#5874,#5878));+#5871=ORIENTED_EDGE('',*,*,#5872,.F.);+#5872=EDGE_CURVE('',#2557,#3971,#5864,.T.);+#5873=ORIENTED_EDGE('',*,*,#2569,.T.);+#5874=ORIENTED_EDGE('',*,*,#5875,.T.);+#5875=EDGE_CURVE('',#2564,#3975,#5876,.T.);+#5876=LINE('',#5877,#136);+#5877=CARTESIAN_POINT('',(3.7,-1.025,0.85));+#5878=ORIENTED_EDGE('',*,*,#3974,.F.);+#5879=ADVANCED_FACE('',(#5880),#5936,.F.);+#5880=FACE_BOUND('',#5881,.F.);+#5881=EDGE_LOOP('',(#5882,#5883,#5884,#5891,#5896,#5903,#5908,#5913,#5918,#5924,#5929,#5934));+#5882=ORIENTED_EDGE('',*,*,#2563,.F.);+#5883=ORIENTED_EDGE('',*,*,#2574,.T.);+#5884=ORIENTED_EDGE('',*,*,#5885,.T.);+#5885=EDGE_CURVE('',#2575,#5886,#5888,.T.);+#5886=VERTEX_POINT('',#5887);+#5887=CARTESIAN_POINT('',(3.798480775301,-1.025,0.667364817767));+#5888=CIRCLE('',#5889,0.1);+#5889=AXIS2_PLACEMENT_3D('',#5890,#151,#5191);+#5890=CARTESIAN_POINT('',(3.7,-1.025,0.65));+#5891=ORIENTED_EDGE('',*,*,#5892,.T.);+#5892=EDGE_CURVE('',#5886,#5893,#5895,.T.);+#5893=VERTEX_POINT('',#5894);+#5894=CARTESIAN_POINT('',(3.882385590716,-1.025,0.165270364467));+#5895=LINE('',#5887,#5197);+#5896=ORIENTED_EDGE('',*,*,#5897,.T.);+#5897=EDGE_CURVE('',#5893,#5898,#5900,.T.);+#5898=VERTEX_POINT('',#5899);+#5899=CARTESIAN_POINT('',(4.079347141319,-1.025,1.387778780781E-16));+#5900=CIRCLE('',#5901,0.2);+#5901=AXIS2_PLACEMENT_3D('',#5902,#123,#5206);+#5902=CARTESIAN_POINT('',(4.079347141319,-1.025,0.2));+#5903=ORIENTED_EDGE('',*,*,#5904,.T.);+#5904=EDGE_CURVE('',#5898,#5905,#5907,.T.);+#5905=VERTEX_POINT('',#5906);+#5906=CARTESIAN_POINT('',(4.5,-1.025,1.387778780781E-16));+#5907=LINE('',#5899,#27);+#5908=ORIENTED_EDGE('',*,*,#5909,.T.);+#5909=EDGE_CURVE('',#5905,#5910,#5912,.T.);+#5910=VERTEX_POINT('',#5911);+#5911=CARTESIAN_POINT('',(4.5,-1.025,0.1));+#5912=LINE('',#5906,#188);+#5913=ORIENTED_EDGE('',*,*,#5914,.T.);+#5914=EDGE_CURVE('',#5910,#5915,#5917,.T.);+#5915=VERTEX_POINT('',#5916);+#5916=CARTESIAN_POINT('',(4.079347141319,-1.025,0.1));+#5917=LINE('',#5911,#136);+#5918=ORIENTED_EDGE('',*,*,#5919,.T.);+#5919=EDGE_CURVE('',#5915,#5920,#5922,.T.);+#5920=VERTEX_POINT('',#5921);+#5921=CARTESIAN_POINT('',(3.980866366018,-1.025,0.182635182233));+#5922=CIRCLE('',#5923,1.E-01);+#5923=AXIS2_PLACEMENT_3D('',#5902,#151,#5228);+#5924=ORIENTED_EDGE('',*,*,#5925,.T.);+#5925=EDGE_CURVE('',#5920,#5926,#5928,.T.);+#5926=VERTEX_POINT('',#5927);+#5927=CARTESIAN_POINT('',(3.896961550602,-1.025,0.684729635533));+#5928=LINE('',#5921,#5234);+#5929=ORIENTED_EDGE('',*,*,#5930,.T.);+#5930=EDGE_CURVE('',#5926,#5931,#5932,.T.);+#5931=VERTEX_POINT('',#5877);+#5932=CIRCLE('',#5933,0.2);+#5933=AXIS2_PLACEMENT_3D('',#5890,#123,#5240);+#5934=ORIENTED_EDGE('',*,*,#5935,.T.);+#5935=EDGE_CURVE('',#5931,#2564,#5876,.T.);+#5936=PLANE('',#5937);+#5937=AXIS2_PLACEMENT_3D('',#5938,#123,#13);+#5938=CARTESIAN_POINT('',(3.914276639233,-1.025,0.410238158856));+#5939=ADVANCED_FACE('',(#5940),#5954,.F.);+#5940=FACE_BOUND('',#5941,.F.);+#5941=EDGE_LOOP('',(#5942,#5943,#5950,#5953));+#5942=ORIENTED_EDGE('',*,*,#2587,.T.);+#5943=ORIENTED_EDGE('',*,*,#5944,.T.);+#5944=EDGE_CURVE('',#2582,#5945,#5947,.T.);+#5945=VERTEX_POINT('',#5946);+#5946=CARTESIAN_POINT('',(3.798480775301,-1.375,0.667364817767));+#5947=CIRCLE('',#5948,0.1);+#5948=AXIS2_PLACEMENT_3D('',#5949,#151,#5191);+#5949=CARTESIAN_POINT('',(3.7,-1.375,0.65));+#5950=ORIENTED_EDGE('',*,*,#5951,.F.);+#5951=EDGE_CURVE('',#5886,#5945,#5952,.T.);+#5952=LINE('',#5887,#122);+#5953=ORIENTED_EDGE('',*,*,#5885,.F.);+#5954=CYLINDRICAL_SURFACE('',#5889,0.1);+#5955=ADVANCED_FACE('',(#5956),#6005,.T.);+#5956=FACE_BOUND('',#5957,.T.);+#5957=EDGE_LOOP('',(#2594,#2580,#5943,#5958,#5963,#5970,#5975,#5980,#5985,#5991,#5996,#6002));+#5958=ORIENTED_EDGE('',*,*,#5959,.T.);+#5959=EDGE_CURVE('',#5945,#5960,#5962,.T.);+#5960=VERTEX_POINT('',#5961);+#5961=CARTESIAN_POINT('',(3.882385590716,-1.375,0.165270364467));+#5962=LINE('',#5946,#5197);+#5963=ORIENTED_EDGE('',*,*,#5964,.T.);+#5964=EDGE_CURVE('',#5960,#5965,#5967,.T.);+#5965=VERTEX_POINT('',#5966);+#5966=CARTESIAN_POINT('',(4.079347141319,-1.375,1.387778780781E-16));+#5967=CIRCLE('',#5968,0.2);+#5968=AXIS2_PLACEMENT_3D('',#5969,#123,#5206);+#5969=CARTESIAN_POINT('',(4.079347141319,-1.375,0.2));+#5970=ORIENTED_EDGE('',*,*,#5971,.T.);+#5971=EDGE_CURVE('',#5965,#5972,#5974,.T.);+#5972=VERTEX_POINT('',#5973);+#5973=CARTESIAN_POINT('',(4.5,-1.375,1.387778780781E-16));+#5974=LINE('',#5966,#27);+#5975=ORIENTED_EDGE('',*,*,#5976,.T.);+#5976=EDGE_CURVE('',#5972,#5977,#5979,.T.);+#5977=VERTEX_POINT('',#5978);+#5978=CARTESIAN_POINT('',(4.5,-1.375,0.1));+#5979=LINE('',#5973,#188);+#5980=ORIENTED_EDGE('',*,*,#5981,.T.);+#5981=EDGE_CURVE('',#5977,#5982,#5984,.T.);+#5982=VERTEX_POINT('',#5983);+#5983=CARTESIAN_POINT('',(4.079347141319,-1.375,0.1));+#5984=LINE('',#5978,#136);+#5985=ORIENTED_EDGE('',*,*,#5986,.T.);+#5986=EDGE_CURVE('',#5982,#5987,#5989,.T.);+#5987=VERTEX_POINT('',#5988);+#5988=CARTESIAN_POINT('',(3.980866366018,-1.375,0.182635182233));+#5989=CIRCLE('',#5990,1.E-01);+#5990=AXIS2_PLACEMENT_3D('',#5969,#151,#5228);+#5991=ORIENTED_EDGE('',*,*,#5992,.T.);+#5992=EDGE_CURVE('',#5987,#5993,#5995,.T.);+#5993=VERTEX_POINT('',#5994);+#5994=CARTESIAN_POINT('',(3.896961550602,-1.375,0.684729635533));+#5995=LINE('',#5988,#5234);+#5996=ORIENTED_EDGE('',*,*,#5997,.T.);+#5997=EDGE_CURVE('',#5993,#5998,#6000,.T.);+#5998=VERTEX_POINT('',#5999);+#5999=CARTESIAN_POINT('',(3.7,-1.375,0.85));+#6000=CIRCLE('',#6001,0.2);+#6001=AXIS2_PLACEMENT_3D('',#5949,#123,#5240);+#6002=ORIENTED_EDGE('',*,*,#6003,.T.);+#6003=EDGE_CURVE('',#5998,#2596,#6004,.T.);+#6004=LINE('',#5999,#136);+#6005=PLANE('',#6006);+#6006=AXIS2_PLACEMENT_3D('',#6007,#123,#13);+#6007=CARTESIAN_POINT('',(3.914276639233,-1.375,0.410238158856));+#6008=ADVANCED_FACE('',(#6009),#846,.F.);+#6009=FACE_BOUND('',#6010,.F.);+#6010=EDGE_LOOP('',(#6011,#6013,#6014,#6018));+#6011=ORIENTED_EDGE('',*,*,#6012,.F.);+#6012=EDGE_CURVE('',#2596,#3979,#6004,.T.);+#6013=ORIENTED_EDGE('',*,*,#2608,.T.);+#6014=ORIENTED_EDGE('',*,*,#6015,.T.);+#6015=EDGE_CURVE('',#2603,#3983,#6016,.T.);+#6016=LINE('',#6017,#136);+#6017=CARTESIAN_POINT('',(3.7,-1.825,0.85));+#6018=ORIENTED_EDGE('',*,*,#3982,.F.);+#6019=ADVANCED_FACE('',(#6020),#6076,.F.);+#6020=FACE_BOUND('',#6021,.F.);+#6021=EDGE_LOOP('',(#6022,#6023,#6024,#6031,#6036,#6043,#6048,#6053,#6058,#6064,#6069,#6074));+#6022=ORIENTED_EDGE('',*,*,#2602,.F.);+#6023=ORIENTED_EDGE('',*,*,#2613,.T.);+#6024=ORIENTED_EDGE('',*,*,#6025,.T.);+#6025=EDGE_CURVE('',#2614,#6026,#6028,.T.);+#6026=VERTEX_POINT('',#6027);+#6027=CARTESIAN_POINT('',(3.798480775301,-1.825,0.667364817767));+#6028=CIRCLE('',#6029,0.1);+#6029=AXIS2_PLACEMENT_3D('',#6030,#151,#5191);+#6030=CARTESIAN_POINT('',(3.7,-1.825,0.65));+#6031=ORIENTED_EDGE('',*,*,#6032,.T.);+#6032=EDGE_CURVE('',#6026,#6033,#6035,.T.);+#6033=VERTEX_POINT('',#6034);+#6034=CARTESIAN_POINT('',(3.882385590716,-1.825,0.165270364467));+#6035=LINE('',#6027,#5197);+#6036=ORIENTED_EDGE('',*,*,#6037,.T.);+#6037=EDGE_CURVE('',#6033,#6038,#6040,.T.);+#6038=VERTEX_POINT('',#6039);+#6039=CARTESIAN_POINT('',(4.079347141319,-1.825,1.387778780781E-16));+#6040=CIRCLE('',#6041,0.2);+#6041=AXIS2_PLACEMENT_3D('',#6042,#123,#5206);+#6042=CARTESIAN_POINT('',(4.079347141319,-1.825,0.2));+#6043=ORIENTED_EDGE('',*,*,#6044,.T.);+#6044=EDGE_CURVE('',#6038,#6045,#6047,.T.);+#6045=VERTEX_POINT('',#6046);+#6046=CARTESIAN_POINT('',(4.5,-1.825,1.387778780781E-16));+#6047=LINE('',#6039,#27);+#6048=ORIENTED_EDGE('',*,*,#6049,.T.);+#6049=EDGE_CURVE('',#6045,#6050,#6052,.T.);+#6050=VERTEX_POINT('',#6051);+#6051=CARTESIAN_POINT('',(4.5,-1.825,0.1));+#6052=LINE('',#6046,#188);+#6053=ORIENTED_EDGE('',*,*,#6054,.T.);+#6054=EDGE_CURVE('',#6050,#6055,#6057,.T.);+#6055=VERTEX_POINT('',#6056);+#6056=CARTESIAN_POINT('',(4.079347141319,-1.825,0.1));+#6057=LINE('',#6051,#136);+#6058=ORIENTED_EDGE('',*,*,#6059,.T.);+#6059=EDGE_CURVE('',#6055,#6060,#6062,.T.);+#6060=VERTEX_POINT('',#6061);+#6061=CARTESIAN_POINT('',(3.980866366018,-1.825,0.182635182233));+#6062=CIRCLE('',#6063,1.E-01);+#6063=AXIS2_PLACEMENT_3D('',#6042,#151,#5228);+#6064=ORIENTED_EDGE('',*,*,#6065,.T.);+#6065=EDGE_CURVE('',#6060,#6066,#6068,.T.);+#6066=VERTEX_POINT('',#6067);+#6067=CARTESIAN_POINT('',(3.896961550602,-1.825,0.684729635533));+#6068=LINE('',#6061,#5234);+#6069=ORIENTED_EDGE('',*,*,#6070,.T.);+#6070=EDGE_CURVE('',#6066,#6071,#6072,.T.);+#6071=VERTEX_POINT('',#6017);+#6072=CIRCLE('',#6073,0.2);+#6073=AXIS2_PLACEMENT_3D('',#6030,#123,#5240);+#6074=ORIENTED_EDGE('',*,*,#6075,.T.);+#6075=EDGE_CURVE('',#6071,#2603,#6016,.T.);+#6076=PLANE('',#6077);+#6077=AXIS2_PLACEMENT_3D('',#6078,#123,#13);+#6078=CARTESIAN_POINT('',(3.914276639233,-1.825,0.410238158856));+#6079=ADVANCED_FACE('',(#6080),#6094,.F.);+#6080=FACE_BOUND('',#6081,.F.);+#6081=EDGE_LOOP('',(#6082,#6083,#6090,#6093));+#6082=ORIENTED_EDGE('',*,*,#2626,.T.);+#6083=ORIENTED_EDGE('',*,*,#6084,.T.);+#6084=EDGE_CURVE('',#2621,#6085,#6087,.T.);+#6085=VERTEX_POINT('',#6086);+#6086=CARTESIAN_POINT('',(3.798480775301,-2.175,0.667364817767));+#6087=CIRCLE('',#6088,0.1);+#6088=AXIS2_PLACEMENT_3D('',#6089,#151,#5191);+#6089=CARTESIAN_POINT('',(3.7,-2.175,0.65));+#6090=ORIENTED_EDGE('',*,*,#6091,.F.);+#6091=EDGE_CURVE('',#6026,#6085,#6092,.T.);+#6092=LINE('',#6027,#122);+#6093=ORIENTED_EDGE('',*,*,#6025,.F.);+#6094=CYLINDRICAL_SURFACE('',#6029,0.1);+#6095=ADVANCED_FACE('',(#6096),#6145,.T.);+#6096=FACE_BOUND('',#6097,.T.);+#6097=EDGE_LOOP('',(#2633,#2619,#6083,#6098,#6103,#6110,#6115,#6120,#6125,#6131,#6136,#6142));+#6098=ORIENTED_EDGE('',*,*,#6099,.T.);+#6099=EDGE_CURVE('',#6085,#6100,#6102,.T.);+#6100=VERTEX_POINT('',#6101);+#6101=CARTESIAN_POINT('',(3.882385590716,-2.175,0.165270364467));+#6102=LINE('',#6086,#5197);+#6103=ORIENTED_EDGE('',*,*,#6104,.T.);+#6104=EDGE_CURVE('',#6100,#6105,#6107,.T.);+#6105=VERTEX_POINT('',#6106);+#6106=CARTESIAN_POINT('',(4.079347141319,-2.175,1.387778780781E-16));+#6107=CIRCLE('',#6108,0.2);+#6108=AXIS2_PLACEMENT_3D('',#6109,#123,#5206);+#6109=CARTESIAN_POINT('',(4.079347141319,-2.175,0.2));+#6110=ORIENTED_EDGE('',*,*,#6111,.T.);+#6111=EDGE_CURVE('',#6105,#6112,#6114,.T.);+#6112=VERTEX_POINT('',#6113);+#6113=CARTESIAN_POINT('',(4.5,-2.175,1.387778780781E-16));+#6114=LINE('',#6106,#27);+#6115=ORIENTED_EDGE('',*,*,#6116,.T.);+#6116=EDGE_CURVE('',#6112,#6117,#6119,.T.);+#6117=VERTEX_POINT('',#6118);+#6118=CARTESIAN_POINT('',(4.5,-2.175,0.1));+#6119=LINE('',#6113,#188);+#6120=ORIENTED_EDGE('',*,*,#6121,.T.);+#6121=EDGE_CURVE('',#6117,#6122,#6124,.T.);+#6122=VERTEX_POINT('',#6123);+#6123=CARTESIAN_POINT('',(4.079347141319,-2.175,0.1));+#6124=LINE('',#6118,#136);+#6125=ORIENTED_EDGE('',*,*,#6126,.T.);+#6126=EDGE_CURVE('',#6122,#6127,#6129,.T.);+#6127=VERTEX_POINT('',#6128);+#6128=CARTESIAN_POINT('',(3.980866366018,-2.175,0.182635182233));+#6129=CIRCLE('',#6130,1.E-01);+#6130=AXIS2_PLACEMENT_3D('',#6109,#151,#5228);+#6131=ORIENTED_EDGE('',*,*,#6132,.T.);+#6132=EDGE_CURVE('',#6127,#6133,#6135,.T.);+#6133=VERTEX_POINT('',#6134);+#6134=CARTESIAN_POINT('',(3.896961550602,-2.175,0.684729635533));+#6135=LINE('',#6128,#5234);+#6136=ORIENTED_EDGE('',*,*,#6137,.T.);+#6137=EDGE_CURVE('',#6133,#6138,#6140,.T.);+#6138=VERTEX_POINT('',#6139);+#6139=CARTESIAN_POINT('',(3.7,-2.175,0.85));+#6140=CIRCLE('',#6141,0.2);+#6141=AXIS2_PLACEMENT_3D('',#6089,#123,#5240);+#6142=ORIENTED_EDGE('',*,*,#6143,.T.);+#6143=EDGE_CURVE('',#6138,#2635,#6144,.T.);+#6144=LINE('',#6139,#136);+#6145=PLANE('',#6146);+#6146=AXIS2_PLACEMENT_3D('',#6147,#123,#13);+#6147=CARTESIAN_POINT('',(3.914276639233,-2.175,0.410238158856));+#6148=ADVANCED_FACE('',(#6149),#846,.F.);+#6149=FACE_BOUND('',#6150,.F.);+#6150=EDGE_LOOP('',(#6151,#6153,#6154,#6158));+#6151=ORIENTED_EDGE('',*,*,#6152,.F.);+#6152=EDGE_CURVE('',#2635,#3987,#6144,.T.);+#6153=ORIENTED_EDGE('',*,*,#2647,.T.);+#6154=ORIENTED_EDGE('',*,*,#6155,.T.);+#6155=EDGE_CURVE('',#2642,#3991,#6156,.T.);+#6156=LINE('',#6157,#136);+#6157=CARTESIAN_POINT('',(3.7,-2.625,0.85));+#6158=ORIENTED_EDGE('',*,*,#3990,.F.);+#6159=ADVANCED_FACE('',(#6160),#6216,.F.);+#6160=FACE_BOUND('',#6161,.F.);+#6161=EDGE_LOOP('',(#6162,#6163,#6164,#6171,#6176,#6183,#6188,#6193,#6198,#6204,#6209,#6214));+#6162=ORIENTED_EDGE('',*,*,#2641,.F.);+#6163=ORIENTED_EDGE('',*,*,#2652,.T.);+#6164=ORIENTED_EDGE('',*,*,#6165,.T.);+#6165=EDGE_CURVE('',#2653,#6166,#6168,.T.);+#6166=VERTEX_POINT('',#6167);+#6167=CARTESIAN_POINT('',(3.798480775301,-2.625,0.667364817767));+#6168=CIRCLE('',#6169,0.1);+#6169=AXIS2_PLACEMENT_3D('',#6170,#151,#5191);+#6170=CARTESIAN_POINT('',(3.7,-2.625,0.65));+#6171=ORIENTED_EDGE('',*,*,#6172,.T.);+#6172=EDGE_CURVE('',#6166,#6173,#6175,.T.);+#6173=VERTEX_POINT('',#6174);+#6174=CARTESIAN_POINT('',(3.882385590716,-2.625,0.165270364467));+#6175=LINE('',#6167,#5197);+#6176=ORIENTED_EDGE('',*,*,#6177,.T.);+#6177=EDGE_CURVE('',#6173,#6178,#6180,.T.);+#6178=VERTEX_POINT('',#6179);+#6179=CARTESIAN_POINT('',(4.079347141319,-2.625,1.387778780781E-16));+#6180=CIRCLE('',#6181,0.2);+#6181=AXIS2_PLACEMENT_3D('',#6182,#123,#5206);+#6182=CARTESIAN_POINT('',(4.079347141319,-2.625,0.2));+#6183=ORIENTED_EDGE('',*,*,#6184,.T.);+#6184=EDGE_CURVE('',#6178,#6185,#6187,.T.);+#6185=VERTEX_POINT('',#6186);+#6186=CARTESIAN_POINT('',(4.5,-2.625,1.387778780781E-16));+#6187=LINE('',#6179,#27);+#6188=ORIENTED_EDGE('',*,*,#6189,.T.);+#6189=EDGE_CURVE('',#6185,#6190,#6192,.T.);+#6190=VERTEX_POINT('',#6191);+#6191=CARTESIAN_POINT('',(4.5,-2.625,0.1));+#6192=LINE('',#6186,#188);+#6193=ORIENTED_EDGE('',*,*,#6194,.T.);+#6194=EDGE_CURVE('',#6190,#6195,#6197,.T.);+#6195=VERTEX_POINT('',#6196);+#6196=CARTESIAN_POINT('',(4.079347141319,-2.625,0.1));+#6197=LINE('',#6191,#136);+#6198=ORIENTED_EDGE('',*,*,#6199,.T.);+#6199=EDGE_CURVE('',#6195,#6200,#6202,.T.);+#6200=VERTEX_POINT('',#6201);+#6201=CARTESIAN_POINT('',(3.980866366018,-2.625,0.182635182233));+#6202=CIRCLE('',#6203,1.E-01);+#6203=AXIS2_PLACEMENT_3D('',#6182,#151,#5228);+#6204=ORIENTED_EDGE('',*,*,#6205,.T.);+#6205=EDGE_CURVE('',#6200,#6206,#6208,.T.);+#6206=VERTEX_POINT('',#6207);+#6207=CARTESIAN_POINT('',(3.896961550602,-2.625,0.684729635533));+#6208=LINE('',#6201,#5234);+#6209=ORIENTED_EDGE('',*,*,#6210,.T.);+#6210=EDGE_CURVE('',#6206,#6211,#6212,.T.);+#6211=VERTEX_POINT('',#6157);+#6212=CIRCLE('',#6213,0.2);+#6213=AXIS2_PLACEMENT_3D('',#6170,#123,#5240);+#6214=ORIENTED_EDGE('',*,*,#6215,.T.);+#6215=EDGE_CURVE('',#6211,#2642,#6156,.T.);+#6216=PLANE('',#6217);+#6217=AXIS2_PLACEMENT_3D('',#6218,#123,#13);+#6218=CARTESIAN_POINT('',(3.914276639233,-2.625,0.410238158856));+#6219=ADVANCED_FACE('',(#6220),#6234,.F.);+#6220=FACE_BOUND('',#6221,.F.);+#6221=EDGE_LOOP('',(#6222,#6223,#6230,#6233));+#6222=ORIENTED_EDGE('',*,*,#2665,.T.);+#6223=ORIENTED_EDGE('',*,*,#6224,.T.);+#6224=EDGE_CURVE('',#2660,#6225,#6227,.T.);+#6225=VERTEX_POINT('',#6226);+#6226=CARTESIAN_POINT('',(3.798480775301,-2.975,0.667364817767));+#6227=CIRCLE('',#6228,0.1);+#6228=AXIS2_PLACEMENT_3D('',#6229,#151,#5191);+#6229=CARTESIAN_POINT('',(3.7,-2.975,0.65));+#6230=ORIENTED_EDGE('',*,*,#6231,.F.);+#6231=EDGE_CURVE('',#6166,#6225,#6232,.T.);+#6232=LINE('',#6167,#122);+#6233=ORIENTED_EDGE('',*,*,#6165,.F.);+#6234=CYLINDRICAL_SURFACE('',#6169,0.1);+#6235=ADVANCED_FACE('',(#6236),#6285,.T.);+#6236=FACE_BOUND('',#6237,.T.);+#6237=EDGE_LOOP('',(#2672,#2658,#6223,#6238,#6243,#6250,#6255,#6260,#6265,#6271,#6276,#6282));+#6238=ORIENTED_EDGE('',*,*,#6239,.T.);+#6239=EDGE_CURVE('',#6225,#6240,#6242,.T.);+#6240=VERTEX_POINT('',#6241);+#6241=CARTESIAN_POINT('',(3.882385590716,-2.975,0.165270364467));+#6242=LINE('',#6226,#5197);+#6243=ORIENTED_EDGE('',*,*,#6244,.T.);+#6244=EDGE_CURVE('',#6240,#6245,#6247,.T.);+#6245=VERTEX_POINT('',#6246);+#6246=CARTESIAN_POINT('',(4.079347141319,-2.975,1.387778780781E-16));+#6247=CIRCLE('',#6248,0.2);+#6248=AXIS2_PLACEMENT_3D('',#6249,#123,#5206);+#6249=CARTESIAN_POINT('',(4.079347141319,-2.975,0.2));+#6250=ORIENTED_EDGE('',*,*,#6251,.T.);+#6251=EDGE_CURVE('',#6245,#6252,#6254,.T.);+#6252=VERTEX_POINT('',#6253);+#6253=CARTESIAN_POINT('',(4.5,-2.975,1.387778780781E-16));+#6254=LINE('',#6246,#27);+#6255=ORIENTED_EDGE('',*,*,#6256,.T.);+#6256=EDGE_CURVE('',#6252,#6257,#6259,.T.);+#6257=VERTEX_POINT('',#6258);+#6258=CARTESIAN_POINT('',(4.5,-2.975,0.1));+#6259=LINE('',#6253,#188);+#6260=ORIENTED_EDGE('',*,*,#6261,.T.);+#6261=EDGE_CURVE('',#6257,#6262,#6264,.T.);+#6262=VERTEX_POINT('',#6263);+#6263=CARTESIAN_POINT('',(4.079347141319,-2.975,0.1));+#6264=LINE('',#6258,#136);+#6265=ORIENTED_EDGE('',*,*,#6266,.T.);+#6266=EDGE_CURVE('',#6262,#6267,#6269,.T.);+#6267=VERTEX_POINT('',#6268);+#6268=CARTESIAN_POINT('',(3.980866366018,-2.975,0.182635182233));+#6269=CIRCLE('',#6270,1.E-01);+#6270=AXIS2_PLACEMENT_3D('',#6249,#151,#5228);+#6271=ORIENTED_EDGE('',*,*,#6272,.T.);+#6272=EDGE_CURVE('',#6267,#6273,#6275,.T.);+#6273=VERTEX_POINT('',#6274);+#6274=CARTESIAN_POINT('',(3.896961550602,-2.975,0.684729635533));+#6275=LINE('',#6268,#5234);+#6276=ORIENTED_EDGE('',*,*,#6277,.T.);+#6277=EDGE_CURVE('',#6273,#6278,#6280,.T.);+#6278=VERTEX_POINT('',#6279);+#6279=CARTESIAN_POINT('',(3.7,-2.975,0.85));+#6280=CIRCLE('',#6281,0.2);+#6281=AXIS2_PLACEMENT_3D('',#6229,#123,#5240);+#6282=ORIENTED_EDGE('',*,*,#6283,.T.);+#6283=EDGE_CURVE('',#6278,#2674,#6284,.T.);+#6284=LINE('',#6279,#136);+#6285=PLANE('',#6286);+#6286=AXIS2_PLACEMENT_3D('',#6287,#123,#13);+#6287=CARTESIAN_POINT('',(3.914276639233,-2.975,0.410238158856));+#6288=ADVANCED_FACE('',(#6289),#846,.F.);+#6289=FACE_BOUND('',#6290,.F.);+#6290=EDGE_LOOP('',(#6291,#6293,#6294,#6295,#6296,#6302,#6305,#6308));+#6291=ORIENTED_EDGE('',*,*,#6292,.F.);+#6292=EDGE_CURVE('',#2674,#3995,#6284,.T.);+#6293=ORIENTED_EDGE('',*,*,#2685,.T.);+#6294=ORIENTED_EDGE('',*,*,#2711,.T.);+#6295=ORIENTED_EDGE('',*,*,#2728,.T.);+#6296=ORIENTED_EDGE('',*,*,#6297,.T.);+#6297=EDGE_CURVE('',#2723,#6298,#6300,.T.);+#6298=VERTEX_POINT('',#6299);+#6299=CARTESIAN_POINT('',(2.975,-3.425,0.85));+#6300=LINE('',#6301,#4055);+#6301=CARTESIAN_POINT('',(2.975,-3.7,0.85));+#6302=ORIENTED_EDGE('',*,*,#6303,.F.);+#6303=EDGE_CURVE('',#6304,#6298,#4049,.T.);+#6304=VERTEX_POINT('',#4050);+#6305=ORIENTED_EDGE('',*,*,#6306,.F.);+#6306=EDGE_CURVE('',#3999,#6304,#6307,.T.);+#6307=LINE('',#4000,#129);+#6308=ORIENTED_EDGE('',*,*,#3998,.F.);+#6309=ADVANCED_FACE('',(#6310),#6375,.F.);+#6310=FACE_BOUND('',#6311,.F.);+#6311=EDGE_LOOP('',(#6312,#6313,#6314,#6323,#6330,#6338,#6343,#6348,#6353,#6360,#6367,#6373));+#6312=ORIENTED_EDGE('',*,*,#2722,.F.);+#6313=ORIENTED_EDGE('',*,*,#2736,.T.);+#6314=ORIENTED_EDGE('',*,*,#6315,.T.);+#6315=EDGE_CURVE('',#2737,#6316,#6318,.T.);+#6316=VERTEX_POINT('',#6317);+#6317=CARTESIAN_POINT('',(2.975,-3.798480775301,0.667364817767));+#6318=CIRCLE('',#6319,0.1);+#6319=AXIS2_PLACEMENT_3D('',#6320,#6321,#6322);+#6320=CARTESIAN_POINT('',(2.975,-3.7,0.65));+#6321=DIRECTION('',(1.,-1.110223024625E-16,0.));+#6322=DIRECTION('',(-4.930380657631E-31,-4.440892098501E-15,1.));+#6323=ORIENTED_EDGE('',*,*,#6324,.T.);+#6324=EDGE_CURVE('',#6316,#6325,#6327,.T.);+#6325=VERTEX_POINT('',#6326);+#6326=CARTESIAN_POINT('',(2.975,-3.882385590716,0.165270364467));+#6327=LINE('',#6317,#6328);+#6328=VECTOR('',#6329,1.);+#6329=DIRECTION('',(-1.829914699438E-17,-0.16482406317,-0.986322983713));+#6330=ORIENTED_EDGE('',*,*,#6331,.T.);+#6331=EDGE_CURVE('',#6325,#6332,#6334,.T.);+#6332=VERTEX_POINT('',#6333);+#6333=CARTESIAN_POINT('',(2.975,-4.079347141319,1.387778780781E-16));+#6334=CIRCLE('',#6335,0.2);+#6335=AXIS2_PLACEMENT_3D('',#6336,#2754,#6337);+#6336=CARTESIAN_POINT('',(2.975,-4.079347141319,0.2));+#6337=DIRECTION('',(1.093356242224E-16,0.984807753012,-0.173648177667));+#6338=ORIENTED_EDGE('',*,*,#6339,.T.);+#6339=EDGE_CURVE('',#6332,#6340,#6342,.T.);+#6340=VERTEX_POINT('',#6341);+#6341=CARTESIAN_POINT('',(2.975,-4.5,1.387778780781E-16));+#6342=LINE('',#6333,#2741);+#6343=ORIENTED_EDGE('',*,*,#6344,.T.);+#6344=EDGE_CURVE('',#6340,#6345,#6347,.T.);+#6345=VERTEX_POINT('',#6346);+#6346=CARTESIAN_POINT('',(2.975,-4.5,0.1));+#6347=LINE('',#6341,#188);+#6348=ORIENTED_EDGE('',*,*,#6349,.T.);+#6349=EDGE_CURVE('',#6345,#6350,#6352,.T.);+#6350=VERTEX_POINT('',#6351);+#6351=CARTESIAN_POINT('',(2.975,-4.079347141319,0.1));+#6352=LINE('',#6346,#4055);+#6353=ORIENTED_EDGE('',*,*,#6354,.T.);+#6354=EDGE_CURVE('',#6350,#6355,#6357,.T.);+#6355=VERTEX_POINT('',#6356);+#6356=CARTESIAN_POINT('',(2.975,-3.980866366018,0.182635182233));+#6357=CIRCLE('',#6358,1.E-01);+#6358=AXIS2_PLACEMENT_3D('',#6336,#6321,#6359);+#6359=DIRECTION('',(-9.860761315263E-31,-8.881784197001E-15,-1.));+#6360=ORIENTED_EDGE('',*,*,#6361,.T.);+#6361=EDGE_CURVE('',#6355,#6362,#6364,.T.);+#6362=VERTEX_POINT('',#6363);+#6363=CARTESIAN_POINT('',(2.975,-3.896961550602,0.684729635533));+#6364=LINE('',#6356,#6365);+#6365=VECTOR('',#6366,1.);+#6366=DIRECTION('',(1.829914699438E-17,0.16482406317,0.986322983713));+#6367=ORIENTED_EDGE('',*,*,#6368,.T.);+#6368=EDGE_CURVE('',#6362,#6369,#6370,.T.);+#6369=VERTEX_POINT('',#6301);+#6370=CIRCLE('',#6371,0.2);+#6371=AXIS2_PLACEMENT_3D('',#6320,#2754,#6372);+#6372=DIRECTION('',(-1.093356242224E-16,-0.984807753012,0.173648177667));+#6373=ORIENTED_EDGE('',*,*,#6374,.T.);+#6374=EDGE_CURVE('',#6369,#2723,#6300,.T.);+#6375=PLANE('',#6376);+#6376=AXIS2_PLACEMENT_3D('',#6377,#2754,#13);+#6377=CARTESIAN_POINT('',(2.975,-3.914276639233,0.410238158856));+#6378=ADVANCED_FACE('',(#6379),#6393,.F.);+#6379=FACE_BOUND('',#6380,.F.);+#6380=EDGE_LOOP('',(#6381,#6382,#6389,#6392));+#6381=ORIENTED_EDGE('',*,*,#2751,.T.);+#6382=ORIENTED_EDGE('',*,*,#6383,.T.);+#6383=EDGE_CURVE('',#2746,#6384,#6386,.T.);+#6384=VERTEX_POINT('',#6385);+#6385=CARTESIAN_POINT('',(2.625,-3.798480775301,0.667364817767));+#6386=CIRCLE('',#6387,0.1);+#6387=AXIS2_PLACEMENT_3D('',#6388,#6321,#6322);+#6388=CARTESIAN_POINT('',(2.625,-3.7,0.65));+#6389=ORIENTED_EDGE('',*,*,#6390,.F.);+#6390=EDGE_CURVE('',#6316,#6384,#6391,.T.);+#6391=LINE('',#6317,#2753);+#6392=ORIENTED_EDGE('',*,*,#6315,.F.);+#6393=CYLINDRICAL_SURFACE('',#6319,0.1);+#6394=ADVANCED_FACE('',(#6395),#6444,.T.);+#6395=FACE_BOUND('',#6396,.T.);+#6396=EDGE_LOOP('',(#2760,#2744,#6382,#6397,#6402,#6409,#6414,#6419,#6424,#6430,#6435,#6441));+#6397=ORIENTED_EDGE('',*,*,#6398,.T.);+#6398=EDGE_CURVE('',#6384,#6399,#6401,.T.);+#6399=VERTEX_POINT('',#6400);+#6400=CARTESIAN_POINT('',(2.625,-3.882385590716,0.165270364467));+#6401=LINE('',#6385,#6328);+#6402=ORIENTED_EDGE('',*,*,#6403,.T.);+#6403=EDGE_CURVE('',#6399,#6404,#6406,.T.);+#6404=VERTEX_POINT('',#6405);+#6405=CARTESIAN_POINT('',(2.625,-4.079347141319,1.387778780781E-16));+#6406=CIRCLE('',#6407,0.2);+#6407=AXIS2_PLACEMENT_3D('',#6408,#2754,#6337);+#6408=CARTESIAN_POINT('',(2.625,-4.079347141319,0.2));+#6409=ORIENTED_EDGE('',*,*,#6410,.T.);+#6410=EDGE_CURVE('',#6404,#6411,#6413,.T.);+#6411=VERTEX_POINT('',#6412);+#6412=CARTESIAN_POINT('',(2.625,-4.5,1.387778780781E-16));+#6413=LINE('',#6405,#2741);+#6414=ORIENTED_EDGE('',*,*,#6415,.T.);+#6415=EDGE_CURVE('',#6411,#6416,#6418,.T.);+#6416=VERTEX_POINT('',#6417);+#6417=CARTESIAN_POINT('',(2.625,-4.5,0.1));+#6418=LINE('',#6412,#188);+#6419=ORIENTED_EDGE('',*,*,#6420,.T.);+#6420=EDGE_CURVE('',#6416,#6421,#6423,.T.);+#6421=VERTEX_POINT('',#6422);+#6422=CARTESIAN_POINT('',(2.625,-4.079347141319,0.1));+#6423=LINE('',#6417,#4055);+#6424=ORIENTED_EDGE('',*,*,#6425,.T.);+#6425=EDGE_CURVE('',#6421,#6426,#6428,.T.);+#6426=VERTEX_POINT('',#6427);+#6427=CARTESIAN_POINT('',(2.625,-3.980866366018,0.182635182233));+#6428=CIRCLE('',#6429,1.E-01);+#6429=AXIS2_PLACEMENT_3D('',#6408,#6321,#6359);+#6430=ORIENTED_EDGE('',*,*,#6431,.T.);+#6431=EDGE_CURVE('',#6426,#6432,#6434,.T.);+#6432=VERTEX_POINT('',#6433);+#6433=CARTESIAN_POINT('',(2.625,-3.896961550602,0.684729635533));+#6434=LINE('',#6427,#6365);+#6435=ORIENTED_EDGE('',*,*,#6436,.T.);+#6436=EDGE_CURVE('',#6432,#6437,#6439,.T.);+#6437=VERTEX_POINT('',#6438);+#6438=CARTESIAN_POINT('',(2.625,-3.7,0.85));+#6439=CIRCLE('',#6440,0.2);+#6440=AXIS2_PLACEMENT_3D('',#6388,#2754,#6372);+#6441=ORIENTED_EDGE('',*,*,#6442,.T.);+#6442=EDGE_CURVE('',#6437,#2762,#6443,.T.);+#6443=LINE('',#6438,#4055);+#6444=PLANE('',#6445);+#6445=AXIS2_PLACEMENT_3D('',#6446,#2754,#13);+#6446=CARTESIAN_POINT('',(2.625,-3.914276639233,0.410238158856));+#6447=ADVANCED_FACE('',(#6448),#846,.F.);+#6448=FACE_BOUND('',#6449,.F.);+#6449=EDGE_LOOP('',(#6450,#6451,#6457,#6461));+#6450=ORIENTED_EDGE('',*,*,#2774,.T.);+#6451=ORIENTED_EDGE('',*,*,#6452,.T.);+#6452=EDGE_CURVE('',#2769,#6453,#6455,.T.);+#6453=VERTEX_POINT('',#6454);+#6454=CARTESIAN_POINT('',(2.175,-3.425,0.85));+#6455=LINE('',#6456,#4055);+#6456=CARTESIAN_POINT('',(2.175,-3.7,0.85));+#6457=ORIENTED_EDGE('',*,*,#6458,.F.);+#6458=EDGE_CURVE('',#6459,#6453,#4049,.T.);+#6459=VERTEX_POINT('',#6460);+#6460=CARTESIAN_POINT('',(2.625,-3.425,0.85));+#6461=ORIENTED_EDGE('',*,*,#6462,.F.);+#6462=EDGE_CURVE('',#2762,#6459,#6443,.T.);+#6463=ADVANCED_FACE('',(#6464),#6520,.F.);+#6464=FACE_BOUND('',#6465,.F.);+#6465=EDGE_LOOP('',(#6466,#6467,#6468,#6475,#6480,#6487,#6492,#6497,#6502,#6508,#6513,#6518));+#6466=ORIENTED_EDGE('',*,*,#2768,.F.);+#6467=ORIENTED_EDGE('',*,*,#2779,.T.);+#6468=ORIENTED_EDGE('',*,*,#6469,.T.);+#6469=EDGE_CURVE('',#2780,#6470,#6472,.T.);+#6470=VERTEX_POINT('',#6471);+#6471=CARTESIAN_POINT('',(2.175,-3.798480775301,0.667364817767));+#6472=CIRCLE('',#6473,0.1);+#6473=AXIS2_PLACEMENT_3D('',#6474,#6321,#6322);+#6474=CARTESIAN_POINT('',(2.175,-3.7,0.65));+#6475=ORIENTED_EDGE('',*,*,#6476,.T.);+#6476=EDGE_CURVE('',#6470,#6477,#6479,.T.);+#6477=VERTEX_POINT('',#6478);+#6478=CARTESIAN_POINT('',(2.175,-3.882385590716,0.165270364467));+#6479=LINE('',#6471,#6328);+#6480=ORIENTED_EDGE('',*,*,#6481,.T.);+#6481=EDGE_CURVE('',#6477,#6482,#6484,.T.);+#6482=VERTEX_POINT('',#6483);+#6483=CARTESIAN_POINT('',(2.175,-4.079347141319,1.387778780781E-16));+#6484=CIRCLE('',#6485,0.2);+#6485=AXIS2_PLACEMENT_3D('',#6486,#2754,#6337);+#6486=CARTESIAN_POINT('',(2.175,-4.079347141319,0.2));+#6487=ORIENTED_EDGE('',*,*,#6488,.T.);+#6488=EDGE_CURVE('',#6482,#6489,#6491,.T.);+#6489=VERTEX_POINT('',#6490);+#6490=CARTESIAN_POINT('',(2.175,-4.5,1.387778780781E-16));+#6491=LINE('',#6483,#2741);+#6492=ORIENTED_EDGE('',*,*,#6493,.T.);+#6493=EDGE_CURVE('',#6489,#6494,#6496,.T.);+#6494=VERTEX_POINT('',#6495);+#6495=CARTESIAN_POINT('',(2.175,-4.5,0.1));+#6496=LINE('',#6490,#188);+#6497=ORIENTED_EDGE('',*,*,#6498,.T.);+#6498=EDGE_CURVE('',#6494,#6499,#6501,.T.);+#6499=VERTEX_POINT('',#6500);+#6500=CARTESIAN_POINT('',(2.175,-4.079347141319,0.1));+#6501=LINE('',#6495,#4055);+#6502=ORIENTED_EDGE('',*,*,#6503,.T.);+#6503=EDGE_CURVE('',#6499,#6504,#6506,.T.);+#6504=VERTEX_POINT('',#6505);+#6505=CARTESIAN_POINT('',(2.175,-3.980866366018,0.182635182233));+#6506=CIRCLE('',#6507,1.E-01);+#6507=AXIS2_PLACEMENT_3D('',#6486,#6321,#6359);+#6508=ORIENTED_EDGE('',*,*,#6509,.T.);+#6509=EDGE_CURVE('',#6504,#6510,#6512,.T.);+#6510=VERTEX_POINT('',#6511);+#6511=CARTESIAN_POINT('',(2.175,-3.896961550602,0.684729635533));+#6512=LINE('',#6505,#6365);+#6513=ORIENTED_EDGE('',*,*,#6514,.T.);+#6514=EDGE_CURVE('',#6510,#6515,#6516,.T.);+#6515=VERTEX_POINT('',#6456);+#6516=CIRCLE('',#6517,0.2);+#6517=AXIS2_PLACEMENT_3D('',#6474,#2754,#6372);+#6518=ORIENTED_EDGE('',*,*,#6519,.T.);+#6519=EDGE_CURVE('',#6515,#2769,#6455,.T.);+#6520=PLANE('',#6521);+#6521=AXIS2_PLACEMENT_3D('',#6522,#2754,#13);+#6522=CARTESIAN_POINT('',(2.175,-3.914276639233,0.410238158856));+#6523=ADVANCED_FACE('',(#6524),#6538,.F.);+#6524=FACE_BOUND('',#6525,.F.);+#6525=EDGE_LOOP('',(#6526,#6527,#6534,#6537));+#6526=ORIENTED_EDGE('',*,*,#2792,.T.);+#6527=ORIENTED_EDGE('',*,*,#6528,.T.);+#6528=EDGE_CURVE('',#2787,#6529,#6531,.T.);+#6529=VERTEX_POINT('',#6530);+#6530=CARTESIAN_POINT('',(1.825,-3.798480775301,0.667364817767));+#6531=CIRCLE('',#6532,0.1);+#6532=AXIS2_PLACEMENT_3D('',#6533,#6321,#6322);+#6533=CARTESIAN_POINT('',(1.825,-3.7,0.65));+#6534=ORIENTED_EDGE('',*,*,#6535,.F.);+#6535=EDGE_CURVE('',#6470,#6529,#6536,.T.);+#6536=LINE('',#6471,#2753);+#6537=ORIENTED_EDGE('',*,*,#6469,.F.);+#6538=CYLINDRICAL_SURFACE('',#6473,0.1);+#6539=ADVANCED_FACE('',(#6540),#6589,.T.);+#6540=FACE_BOUND('',#6541,.T.);+#6541=EDGE_LOOP('',(#2799,#2785,#6527,#6542,#6547,#6554,#6559,#6564,#6569,#6575,#6580,#6586));+#6542=ORIENTED_EDGE('',*,*,#6543,.T.);+#6543=EDGE_CURVE('',#6529,#6544,#6546,.T.);+#6544=VERTEX_POINT('',#6545);+#6545=CARTESIAN_POINT('',(1.825,-3.882385590716,0.165270364467));+#6546=LINE('',#6530,#6328);+#6547=ORIENTED_EDGE('',*,*,#6548,.T.);+#6548=EDGE_CURVE('',#6544,#6549,#6551,.T.);+#6549=VERTEX_POINT('',#6550);+#6550=CARTESIAN_POINT('',(1.825,-4.079347141319,1.387778780781E-16));+#6551=CIRCLE('',#6552,0.2);+#6552=AXIS2_PLACEMENT_3D('',#6553,#2754,#6337);+#6553=CARTESIAN_POINT('',(1.825,-4.079347141319,0.2));+#6554=ORIENTED_EDGE('',*,*,#6555,.T.);+#6555=EDGE_CURVE('',#6549,#6556,#6558,.T.);+#6556=VERTEX_POINT('',#6557);+#6557=CARTESIAN_POINT('',(1.825,-4.5,1.387778780781E-16));+#6558=LINE('',#6550,#2741);+#6559=ORIENTED_EDGE('',*,*,#6560,.T.);+#6560=EDGE_CURVE('',#6556,#6561,#6563,.T.);+#6561=VERTEX_POINT('',#6562);+#6562=CARTESIAN_POINT('',(1.825,-4.5,0.1));+#6563=LINE('',#6557,#188);+#6564=ORIENTED_EDGE('',*,*,#6565,.T.);+#6565=EDGE_CURVE('',#6561,#6566,#6568,.T.);+#6566=VERTEX_POINT('',#6567);+#6567=CARTESIAN_POINT('',(1.825,-4.079347141319,0.1));+#6568=LINE('',#6562,#4055);+#6569=ORIENTED_EDGE('',*,*,#6570,.T.);+#6570=EDGE_CURVE('',#6566,#6571,#6573,.T.);+#6571=VERTEX_POINT('',#6572);+#6572=CARTESIAN_POINT('',(1.825,-3.980866366018,0.182635182233));+#6573=CIRCLE('',#6574,1.E-01);+#6574=AXIS2_PLACEMENT_3D('',#6553,#6321,#6359);+#6575=ORIENTED_EDGE('',*,*,#6576,.T.);+#6576=EDGE_CURVE('',#6571,#6577,#6579,.T.);+#6577=VERTEX_POINT('',#6578);+#6578=CARTESIAN_POINT('',(1.825,-3.896961550602,0.684729635533));+#6579=LINE('',#6572,#6365);+#6580=ORIENTED_EDGE('',*,*,#6581,.T.);+#6581=EDGE_CURVE('',#6577,#6582,#6584,.T.);+#6582=VERTEX_POINT('',#6583);+#6583=CARTESIAN_POINT('',(1.825,-3.7,0.85));+#6584=CIRCLE('',#6585,0.2);+#6585=AXIS2_PLACEMENT_3D('',#6533,#2754,#6372);+#6586=ORIENTED_EDGE('',*,*,#6587,.T.);+#6587=EDGE_CURVE('',#6582,#2801,#6588,.T.);+#6588=LINE('',#6583,#4055);+#6589=PLANE('',#6590);+#6590=AXIS2_PLACEMENT_3D('',#6591,#2754,#13);+#6591=CARTESIAN_POINT('',(1.825,-3.914276639233,0.410238158856));+#6592=ADVANCED_FACE('',(#6593),#846,.F.);+#6593=FACE_BOUND('',#6594,.F.);+#6594=EDGE_LOOP('',(#6595,#6596,#6602,#6606));+#6595=ORIENTED_EDGE('',*,*,#2813,.T.);+#6596=ORIENTED_EDGE('',*,*,#6597,.T.);+#6597=EDGE_CURVE('',#2808,#6598,#6600,.T.);+#6598=VERTEX_POINT('',#6599);+#6599=CARTESIAN_POINT('',(1.375,-3.425,0.85));+#6600=LINE('',#6601,#4055);+#6601=CARTESIAN_POINT('',(1.375,-3.7,0.85));+#6602=ORIENTED_EDGE('',*,*,#6603,.F.);+#6603=EDGE_CURVE('',#6604,#6598,#4049,.T.);+#6604=VERTEX_POINT('',#6605);+#6605=CARTESIAN_POINT('',(1.825,-3.425,0.85));+#6606=ORIENTED_EDGE('',*,*,#6607,.F.);+#6607=EDGE_CURVE('',#2801,#6604,#6588,.T.);+#6608=ADVANCED_FACE('',(#6609),#6665,.F.);+#6609=FACE_BOUND('',#6610,.F.);+#6610=EDGE_LOOP('',(#6611,#6612,#6613,#6620,#6625,#6632,#6637,#6642,#6647,#6653,#6658,#6663));+#6611=ORIENTED_EDGE('',*,*,#2807,.F.);+#6612=ORIENTED_EDGE('',*,*,#2818,.T.);+#6613=ORIENTED_EDGE('',*,*,#6614,.T.);+#6614=EDGE_CURVE('',#2819,#6615,#6617,.T.);+#6615=VERTEX_POINT('',#6616);+#6616=CARTESIAN_POINT('',(1.375,-3.798480775301,0.667364817767));+#6617=CIRCLE('',#6618,0.1);+#6618=AXIS2_PLACEMENT_3D('',#6619,#6321,#6322);+#6619=CARTESIAN_POINT('',(1.375,-3.7,0.65));+#6620=ORIENTED_EDGE('',*,*,#6621,.T.);+#6621=EDGE_CURVE('',#6615,#6622,#6624,.T.);+#6622=VERTEX_POINT('',#6623);+#6623=CARTESIAN_POINT('',(1.375,-3.882385590716,0.165270364467));+#6624=LINE('',#6616,#6328);+#6625=ORIENTED_EDGE('',*,*,#6626,.T.);+#6626=EDGE_CURVE('',#6622,#6627,#6629,.T.);+#6627=VERTEX_POINT('',#6628);+#6628=CARTESIAN_POINT('',(1.375,-4.079347141319,1.387778780781E-16));+#6629=CIRCLE('',#6630,0.2);+#6630=AXIS2_PLACEMENT_3D('',#6631,#2754,#6337);+#6631=CARTESIAN_POINT('',(1.375,-4.079347141319,0.2));+#6632=ORIENTED_EDGE('',*,*,#6633,.T.);+#6633=EDGE_CURVE('',#6627,#6634,#6636,.T.);+#6634=VERTEX_POINT('',#6635);+#6635=CARTESIAN_POINT('',(1.375,-4.5,1.387778780781E-16));+#6636=LINE('',#6628,#2741);+#6637=ORIENTED_EDGE('',*,*,#6638,.T.);+#6638=EDGE_CURVE('',#6634,#6639,#6641,.T.);+#6639=VERTEX_POINT('',#6640);+#6640=CARTESIAN_POINT('',(1.375,-4.5,0.1));+#6641=LINE('',#6635,#188);+#6642=ORIENTED_EDGE('',*,*,#6643,.T.);+#6643=EDGE_CURVE('',#6639,#6644,#6646,.T.);+#6644=VERTEX_POINT('',#6645);+#6645=CARTESIAN_POINT('',(1.375,-4.079347141319,0.1));+#6646=LINE('',#6640,#4055);+#6647=ORIENTED_EDGE('',*,*,#6648,.T.);+#6648=EDGE_CURVE('',#6644,#6649,#6651,.T.);+#6649=VERTEX_POINT('',#6650);+#6650=CARTESIAN_POINT('',(1.375,-3.980866366018,0.182635182233));+#6651=CIRCLE('',#6652,1.E-01);+#6652=AXIS2_PLACEMENT_3D('',#6631,#6321,#6359);+#6653=ORIENTED_EDGE('',*,*,#6654,.T.);+#6654=EDGE_CURVE('',#6649,#6655,#6657,.T.);+#6655=VERTEX_POINT('',#6656);+#6656=CARTESIAN_POINT('',(1.375,-3.896961550602,0.684729635533));+#6657=LINE('',#6650,#6365);+#6658=ORIENTED_EDGE('',*,*,#6659,.T.);+#6659=EDGE_CURVE('',#6655,#6660,#6661,.T.);+#6660=VERTEX_POINT('',#6601);+#6661=CIRCLE('',#6662,0.2);+#6662=AXIS2_PLACEMENT_3D('',#6619,#2754,#6372);+#6663=ORIENTED_EDGE('',*,*,#6664,.T.);+#6664=EDGE_CURVE('',#6660,#2808,#6600,.T.);+#6665=PLANE('',#6666);+#6666=AXIS2_PLACEMENT_3D('',#6667,#2754,#13);+#6667=CARTESIAN_POINT('',(1.375,-3.914276639233,0.410238158856));+#6668=ADVANCED_FACE('',(#6669),#6683,.F.);+#6669=FACE_BOUND('',#6670,.F.);+#6670=EDGE_LOOP('',(#6671,#6672,#6679,#6682));+#6671=ORIENTED_EDGE('',*,*,#2831,.T.);+#6672=ORIENTED_EDGE('',*,*,#6673,.T.);+#6673=EDGE_CURVE('',#2826,#6674,#6676,.T.);+#6674=VERTEX_POINT('',#6675);+#6675=CARTESIAN_POINT('',(1.025,-3.798480775301,0.667364817767));+#6676=CIRCLE('',#6677,0.1);+#6677=AXIS2_PLACEMENT_3D('',#6678,#6321,#6322);+#6678=CARTESIAN_POINT('',(1.025,-3.7,0.65));+#6679=ORIENTED_EDGE('',*,*,#6680,.F.);+#6680=EDGE_CURVE('',#6615,#6674,#6681,.T.);+#6681=LINE('',#6616,#2753);+#6682=ORIENTED_EDGE('',*,*,#6614,.F.);+#6683=CYLINDRICAL_SURFACE('',#6618,0.1);+#6684=ADVANCED_FACE('',(#6685),#6734,.T.);+#6685=FACE_BOUND('',#6686,.T.);+#6686=EDGE_LOOP('',(#2838,#2824,#6672,#6687,#6692,#6699,#6704,#6709,#6714,#6720,#6725,#6731));+#6687=ORIENTED_EDGE('',*,*,#6688,.T.);+#6688=EDGE_CURVE('',#6674,#6689,#6691,.T.);+#6689=VERTEX_POINT('',#6690);+#6690=CARTESIAN_POINT('',(1.025,-3.882385590716,0.165270364467));+#6691=LINE('',#6675,#6328);+#6692=ORIENTED_EDGE('',*,*,#6693,.T.);+#6693=EDGE_CURVE('',#6689,#6694,#6696,.T.);+#6694=VERTEX_POINT('',#6695);+#6695=CARTESIAN_POINT('',(1.025,-4.079347141319,1.387778780781E-16));+#6696=CIRCLE('',#6697,0.2);+#6697=AXIS2_PLACEMENT_3D('',#6698,#2754,#6337);+#6698=CARTESIAN_POINT('',(1.025,-4.079347141319,0.2));+#6699=ORIENTED_EDGE('',*,*,#6700,.T.);+#6700=EDGE_CURVE('',#6694,#6701,#6703,.T.);+#6701=VERTEX_POINT('',#6702);+#6702=CARTESIAN_POINT('',(1.025,-4.5,1.387778780781E-16));+#6703=LINE('',#6695,#2741);+#6704=ORIENTED_EDGE('',*,*,#6705,.T.);+#6705=EDGE_CURVE('',#6701,#6706,#6708,.T.);+#6706=VERTEX_POINT('',#6707);+#6707=CARTESIAN_POINT('',(1.025,-4.5,0.1));+#6708=LINE('',#6702,#188);+#6709=ORIENTED_EDGE('',*,*,#6710,.T.);+#6710=EDGE_CURVE('',#6706,#6711,#6713,.T.);+#6711=VERTEX_POINT('',#6712);+#6712=CARTESIAN_POINT('',(1.025,-4.079347141319,0.1));+#6713=LINE('',#6707,#4055);+#6714=ORIENTED_EDGE('',*,*,#6715,.T.);+#6715=EDGE_CURVE('',#6711,#6716,#6718,.T.);+#6716=VERTEX_POINT('',#6717);+#6717=CARTESIAN_POINT('',(1.025,-3.980866366018,0.182635182233));+#6718=CIRCLE('',#6719,1.E-01);+#6719=AXIS2_PLACEMENT_3D('',#6698,#6321,#6359);+#6720=ORIENTED_EDGE('',*,*,#6721,.T.);+#6721=EDGE_CURVE('',#6716,#6722,#6724,.T.);+#6722=VERTEX_POINT('',#6723);+#6723=CARTESIAN_POINT('',(1.025,-3.896961550602,0.684729635533));+#6724=LINE('',#6717,#6365);+#6725=ORIENTED_EDGE('',*,*,#6726,.T.);+#6726=EDGE_CURVE('',#6722,#6727,#6729,.T.);+#6727=VERTEX_POINT('',#6728);+#6728=CARTESIAN_POINT('',(1.025,-3.7,0.85));+#6729=CIRCLE('',#6730,0.2);+#6730=AXIS2_PLACEMENT_3D('',#6678,#2754,#6372);+#6731=ORIENTED_EDGE('',*,*,#6732,.T.);+#6732=EDGE_CURVE('',#6727,#2840,#6733,.T.);+#6733=LINE('',#6728,#4055);+#6734=PLANE('',#6735);+#6735=AXIS2_PLACEMENT_3D('',#6736,#2754,#13);+#6736=CARTESIAN_POINT('',(1.025,-3.914276639233,0.410238158856));+#6737=ADVANCED_FACE('',(#6738),#846,.F.);+#6738=FACE_BOUND('',#6739,.F.);+#6739=EDGE_LOOP('',(#6740,#6741,#6747,#6751));+#6740=ORIENTED_EDGE('',*,*,#2852,.T.);+#6741=ORIENTED_EDGE('',*,*,#6742,.T.);+#6742=EDGE_CURVE('',#2847,#6743,#6745,.T.);+#6743=VERTEX_POINT('',#6744);+#6744=CARTESIAN_POINT('',(0.575,-3.425,0.85));+#6745=LINE('',#6746,#4055);+#6746=CARTESIAN_POINT('',(0.575,-3.7,0.85));+#6747=ORIENTED_EDGE('',*,*,#6748,.F.);+#6748=EDGE_CURVE('',#6749,#6743,#4049,.T.);+#6749=VERTEX_POINT('',#6750);+#6750=CARTESIAN_POINT('',(1.025,-3.425,0.85));+#6751=ORIENTED_EDGE('',*,*,#6752,.F.);+#6752=EDGE_CURVE('',#2840,#6749,#6733,.T.);+#6753=ADVANCED_FACE('',(#6754),#6810,.F.);+#6754=FACE_BOUND('',#6755,.F.);+#6755=EDGE_LOOP('',(#6756,#6757,#6758,#6765,#6770,#6777,#6782,#6787,#6792,#6798,#6803,#6808));+#6756=ORIENTED_EDGE('',*,*,#2846,.F.);+#6757=ORIENTED_EDGE('',*,*,#2857,.T.);+#6758=ORIENTED_EDGE('',*,*,#6759,.T.);+#6759=EDGE_CURVE('',#2858,#6760,#6762,.T.);+#6760=VERTEX_POINT('',#6761);+#6761=CARTESIAN_POINT('',(0.575,-3.798480775301,0.667364817767));+#6762=CIRCLE('',#6763,0.1);+#6763=AXIS2_PLACEMENT_3D('',#6764,#6321,#6322);+#6764=CARTESIAN_POINT('',(0.575,-3.7,0.65));+#6765=ORIENTED_EDGE('',*,*,#6766,.T.);+#6766=EDGE_CURVE('',#6760,#6767,#6769,.T.);+#6767=VERTEX_POINT('',#6768);+#6768=CARTESIAN_POINT('',(0.575,-3.882385590716,0.165270364467));+#6769=LINE('',#6761,#6328);+#6770=ORIENTED_EDGE('',*,*,#6771,.T.);+#6771=EDGE_CURVE('',#6767,#6772,#6774,.T.);+#6772=VERTEX_POINT('',#6773);+#6773=CARTESIAN_POINT('',(0.575,-4.079347141319,1.387778780781E-16));+#6774=CIRCLE('',#6775,0.2);+#6775=AXIS2_PLACEMENT_3D('',#6776,#2754,#6337);+#6776=CARTESIAN_POINT('',(0.575,-4.079347141319,0.2));+#6777=ORIENTED_EDGE('',*,*,#6778,.T.);+#6778=EDGE_CURVE('',#6772,#6779,#6781,.T.);+#6779=VERTEX_POINT('',#6780);+#6780=CARTESIAN_POINT('',(0.575,-4.5,1.387778780781E-16));+#6781=LINE('',#6773,#2741);+#6782=ORIENTED_EDGE('',*,*,#6783,.T.);+#6783=EDGE_CURVE('',#6779,#6784,#6786,.T.);+#6784=VERTEX_POINT('',#6785);+#6785=CARTESIAN_POINT('',(0.575,-4.5,0.1));+#6786=LINE('',#6780,#188);+#6787=ORIENTED_EDGE('',*,*,#6788,.T.);+#6788=EDGE_CURVE('',#6784,#6789,#6791,.T.);+#6789=VERTEX_POINT('',#6790);+#6790=CARTESIAN_POINT('',(0.575,-4.079347141319,0.1));+#6791=LINE('',#6785,#4055);+#6792=ORIENTED_EDGE('',*,*,#6793,.T.);+#6793=EDGE_CURVE('',#6789,#6794,#6796,.T.);+#6794=VERTEX_POINT('',#6795);+#6795=CARTESIAN_POINT('',(0.575,-3.980866366018,0.182635182233));+#6796=CIRCLE('',#6797,1.E-01);+#6797=AXIS2_PLACEMENT_3D('',#6776,#6321,#6359);+#6798=ORIENTED_EDGE('',*,*,#6799,.T.);+#6799=EDGE_CURVE('',#6794,#6800,#6802,.T.);+#6800=VERTEX_POINT('',#6801);+#6801=CARTESIAN_POINT('',(0.575,-3.896961550602,0.684729635533));+#6802=LINE('',#6795,#6365);+#6803=ORIENTED_EDGE('',*,*,#6804,.T.);+#6804=EDGE_CURVE('',#6800,#6805,#6806,.T.);+#6805=VERTEX_POINT('',#6746);+#6806=CIRCLE('',#6807,0.2);+#6807=AXIS2_PLACEMENT_3D('',#6764,#2754,#6372);+#6808=ORIENTED_EDGE('',*,*,#6809,.T.);+#6809=EDGE_CURVE('',#6805,#2847,#6745,.T.);+#6810=PLANE('',#6811);+#6811=AXIS2_PLACEMENT_3D('',#6812,#2754,#13);+#6812=CARTESIAN_POINT('',(0.575,-3.914276639233,0.410238158856));+#6813=ADVANCED_FACE('',(#6814),#6828,.F.);+#6814=FACE_BOUND('',#6815,.F.);+#6815=EDGE_LOOP('',(#6816,#6817,#6824,#6827));+#6816=ORIENTED_EDGE('',*,*,#2870,.T.);+#6817=ORIENTED_EDGE('',*,*,#6818,.T.);+#6818=EDGE_CURVE('',#2865,#6819,#6821,.T.);+#6819=VERTEX_POINT('',#6820);+#6820=CARTESIAN_POINT('',(0.225,-3.798480775301,0.667364817767));+#6821=CIRCLE('',#6822,0.1);+#6822=AXIS2_PLACEMENT_3D('',#6823,#6321,#6322);+#6823=CARTESIAN_POINT('',(0.225,-3.7,0.65));+#6824=ORIENTED_EDGE('',*,*,#6825,.F.);+#6825=EDGE_CURVE('',#6760,#6819,#6826,.T.);+#6826=LINE('',#6761,#2753);+#6827=ORIENTED_EDGE('',*,*,#6759,.F.);+#6828=CYLINDRICAL_SURFACE('',#6763,0.1);+#6829=ADVANCED_FACE('',(#6830),#6879,.T.);+#6830=FACE_BOUND('',#6831,.T.);+#6831=EDGE_LOOP('',(#2877,#2863,#6817,#6832,#6837,#6844,#6849,#6854,#6859,#6865,#6870,#6876));+#6832=ORIENTED_EDGE('',*,*,#6833,.T.);+#6833=EDGE_CURVE('',#6819,#6834,#6836,.T.);+#6834=VERTEX_POINT('',#6835);+#6835=CARTESIAN_POINT('',(0.225,-3.882385590716,0.165270364467));+#6836=LINE('',#6820,#6328);+#6837=ORIENTED_EDGE('',*,*,#6838,.T.);+#6838=EDGE_CURVE('',#6834,#6839,#6841,.T.);+#6839=VERTEX_POINT('',#6840);+#6840=CARTESIAN_POINT('',(0.225,-4.079347141319,1.387778780781E-16));+#6841=CIRCLE('',#6842,0.2);+#6842=AXIS2_PLACEMENT_3D('',#6843,#2754,#6337);+#6843=CARTESIAN_POINT('',(0.225,-4.079347141319,0.2));+#6844=ORIENTED_EDGE('',*,*,#6845,.T.);+#6845=EDGE_CURVE('',#6839,#6846,#6848,.T.);+#6846=VERTEX_POINT('',#6847);+#6847=CARTESIAN_POINT('',(0.225,-4.5,1.387778780781E-16));+#6848=LINE('',#6840,#2741);+#6849=ORIENTED_EDGE('',*,*,#6850,.T.);+#6850=EDGE_CURVE('',#6846,#6851,#6853,.T.);+#6851=VERTEX_POINT('',#6852);+#6852=CARTESIAN_POINT('',(0.225,-4.5,0.1));+#6853=LINE('',#6847,#188);+#6854=ORIENTED_EDGE('',*,*,#6855,.T.);+#6855=EDGE_CURVE('',#6851,#6856,#6858,.T.);+#6856=VERTEX_POINT('',#6857);+#6857=CARTESIAN_POINT('',(0.225,-4.079347141319,0.1));+#6858=LINE('',#6852,#4055);+#6859=ORIENTED_EDGE('',*,*,#6860,.T.);+#6860=EDGE_CURVE('',#6856,#6861,#6863,.T.);+#6861=VERTEX_POINT('',#6862);+#6862=CARTESIAN_POINT('',(0.225,-3.980866366018,0.182635182233));+#6863=CIRCLE('',#6864,1.E-01);+#6864=AXIS2_PLACEMENT_3D('',#6843,#6321,#6359);+#6865=ORIENTED_EDGE('',*,*,#6866,.T.);+#6866=EDGE_CURVE('',#6861,#6867,#6869,.T.);+#6867=VERTEX_POINT('',#6868);+#6868=CARTESIAN_POINT('',(0.225,-3.896961550602,0.684729635533));+#6869=LINE('',#6862,#6365);+#6870=ORIENTED_EDGE('',*,*,#6871,.T.);+#6871=EDGE_CURVE('',#6867,#6872,#6874,.T.);+#6872=VERTEX_POINT('',#6873);+#6873=CARTESIAN_POINT('',(0.225,-3.7,0.85));+#6874=CIRCLE('',#6875,0.2);+#6875=AXIS2_PLACEMENT_3D('',#6823,#2754,#6372);+#6876=ORIENTED_EDGE('',*,*,#6877,.T.);+#6877=EDGE_CURVE('',#6872,#2879,#6878,.T.);+#6878=LINE('',#6873,#4055);+#6879=PLANE('',#6880);+#6880=AXIS2_PLACEMENT_3D('',#6881,#2754,#13);+#6881=CARTESIAN_POINT('',(0.225,-3.914276639233,0.410238158856));+#6882=ADVANCED_FACE('',(#6883),#846,.F.);+#6883=FACE_BOUND('',#6884,.F.);+#6884=EDGE_LOOP('',(#6885,#6886,#6892,#6896));+#6885=ORIENTED_EDGE('',*,*,#2891,.T.);+#6886=ORIENTED_EDGE('',*,*,#6887,.T.);+#6887=EDGE_CURVE('',#2886,#6888,#6890,.T.);+#6888=VERTEX_POINT('',#6889);+#6889=CARTESIAN_POINT('',(-0.225,-3.425,0.85));+#6890=LINE('',#6891,#4055);+#6891=CARTESIAN_POINT('',(-0.225,-3.7,0.85));+#6892=ORIENTED_EDGE('',*,*,#6893,.F.);+#6893=EDGE_CURVE('',#6894,#6888,#4049,.T.);+#6894=VERTEX_POINT('',#6895);+#6895=CARTESIAN_POINT('',(0.225,-3.425,0.85));+#6896=ORIENTED_EDGE('',*,*,#6897,.F.);+#6897=EDGE_CURVE('',#2879,#6894,#6878,.T.);+#6898=ADVANCED_FACE('',(#6899),#6955,.F.);+#6899=FACE_BOUND('',#6900,.F.);+#6900=EDGE_LOOP('',(#6901,#6902,#6903,#6910,#6915,#6922,#6927,#6932,#6937,#6943,#6948,#6953));+#6901=ORIENTED_EDGE('',*,*,#2885,.F.);+#6902=ORIENTED_EDGE('',*,*,#2896,.T.);+#6903=ORIENTED_EDGE('',*,*,#6904,.T.);+#6904=EDGE_CURVE('',#2897,#6905,#6907,.T.);+#6905=VERTEX_POINT('',#6906);+#6906=CARTESIAN_POINT('',(-0.225,-3.798480775301,0.667364817767));+#6907=CIRCLE('',#6908,0.1);+#6908=AXIS2_PLACEMENT_3D('',#6909,#6321,#6322);+#6909=CARTESIAN_POINT('',(-0.225,-3.7,0.65));+#6910=ORIENTED_EDGE('',*,*,#6911,.T.);+#6911=EDGE_CURVE('',#6905,#6912,#6914,.T.);+#6912=VERTEX_POINT('',#6913);+#6913=CARTESIAN_POINT('',(-0.225,-3.882385590716,0.165270364467));+#6914=LINE('',#6906,#6328);+#6915=ORIENTED_EDGE('',*,*,#6916,.T.);+#6916=EDGE_CURVE('',#6912,#6917,#6919,.T.);+#6917=VERTEX_POINT('',#6918);+#6918=CARTESIAN_POINT('',(-0.225,-4.079347141319,1.387778780781E-16));+#6919=CIRCLE('',#6920,0.2);+#6920=AXIS2_PLACEMENT_3D('',#6921,#2754,#6337);+#6921=CARTESIAN_POINT('',(-0.225,-4.079347141319,0.2));+#6922=ORIENTED_EDGE('',*,*,#6923,.T.);+#6923=EDGE_CURVE('',#6917,#6924,#6926,.T.);+#6924=VERTEX_POINT('',#6925);+#6925=CARTESIAN_POINT('',(-0.225,-4.5,1.387778780781E-16));+#6926=LINE('',#6918,#2741);+#6927=ORIENTED_EDGE('',*,*,#6928,.T.);+#6928=EDGE_CURVE('',#6924,#6929,#6931,.T.);+#6929=VERTEX_POINT('',#6930);+#6930=CARTESIAN_POINT('',(-0.225,-4.5,0.1));+#6931=LINE('',#6925,#188);+#6932=ORIENTED_EDGE('',*,*,#6933,.T.);+#6933=EDGE_CURVE('',#6929,#6934,#6936,.T.);+#6934=VERTEX_POINT('',#6935);+#6935=CARTESIAN_POINT('',(-0.225,-4.079347141319,0.1));+#6936=LINE('',#6930,#4055);+#6937=ORIENTED_EDGE('',*,*,#6938,.T.);+#6938=EDGE_CURVE('',#6934,#6939,#6941,.T.);+#6939=VERTEX_POINT('',#6940);+#6940=CARTESIAN_POINT('',(-0.225,-3.980866366018,0.182635182233));+#6941=CIRCLE('',#6942,1.E-01);+#6942=AXIS2_PLACEMENT_3D('',#6921,#6321,#6359);+#6943=ORIENTED_EDGE('',*,*,#6944,.T.);+#6944=EDGE_CURVE('',#6939,#6945,#6947,.T.);+#6945=VERTEX_POINT('',#6946);+#6946=CARTESIAN_POINT('',(-0.225,-3.896961550602,0.684729635533));+#6947=LINE('',#6940,#6365);+#6948=ORIENTED_EDGE('',*,*,#6949,.T.);+#6949=EDGE_CURVE('',#6945,#6950,#6951,.T.);+#6950=VERTEX_POINT('',#6891);+#6951=CIRCLE('',#6952,0.2);+#6952=AXIS2_PLACEMENT_3D('',#6909,#2754,#6372);+#6953=ORIENTED_EDGE('',*,*,#6954,.T.);+#6954=EDGE_CURVE('',#6950,#2886,#6890,.T.);+#6955=PLANE('',#6956);+#6956=AXIS2_PLACEMENT_3D('',#6957,#2754,#13);+#6957=CARTESIAN_POINT('',(-0.225,-3.914276639233,0.410238158856));+#6958=ADVANCED_FACE('',(#6959),#6973,.F.);+#6959=FACE_BOUND('',#6960,.F.);+#6960=EDGE_LOOP('',(#6961,#6962,#6969,#6972));+#6961=ORIENTED_EDGE('',*,*,#2909,.T.);+#6962=ORIENTED_EDGE('',*,*,#6963,.T.);+#6963=EDGE_CURVE('',#2904,#6964,#6966,.T.);+#6964=VERTEX_POINT('',#6965);+#6965=CARTESIAN_POINT('',(-0.575,-3.798480775301,0.667364817767));+#6966=CIRCLE('',#6967,0.1);+#6967=AXIS2_PLACEMENT_3D('',#6968,#6321,#6322);+#6968=CARTESIAN_POINT('',(-0.575,-3.7,0.65));+#6969=ORIENTED_EDGE('',*,*,#6970,.F.);+#6970=EDGE_CURVE('',#6905,#6964,#6971,.T.);+#6971=LINE('',#6906,#2753);+#6972=ORIENTED_EDGE('',*,*,#6904,.F.);+#6973=CYLINDRICAL_SURFACE('',#6908,0.1);+#6974=ADVANCED_FACE('',(#6975),#7024,.T.);+#6975=FACE_BOUND('',#6976,.T.);+#6976=EDGE_LOOP('',(#2916,#2902,#6962,#6977,#6982,#6989,#6994,#6999,#7004,#7010,#7015,#7021));+#6977=ORIENTED_EDGE('',*,*,#6978,.T.);+#6978=EDGE_CURVE('',#6964,#6979,#6981,.T.);+#6979=VERTEX_POINT('',#6980);+#6980=CARTESIAN_POINT('',(-0.575,-3.882385590716,0.165270364467));+#6981=LINE('',#6965,#6328);+#6982=ORIENTED_EDGE('',*,*,#6983,.T.);+#6983=EDGE_CURVE('',#6979,#6984,#6986,.T.);+#6984=VERTEX_POINT('',#6985);+#6985=CARTESIAN_POINT('',(-0.575,-4.079347141319,1.387778780781E-16));+#6986=CIRCLE('',#6987,0.2);+#6987=AXIS2_PLACEMENT_3D('',#6988,#2754,#6337);+#6988=CARTESIAN_POINT('',(-0.575,-4.079347141319,0.2));+#6989=ORIENTED_EDGE('',*,*,#6990,.T.);+#6990=EDGE_CURVE('',#6984,#6991,#6993,.T.);+#6991=VERTEX_POINT('',#6992);+#6992=CARTESIAN_POINT('',(-0.575,-4.5,1.387778780781E-16));+#6993=LINE('',#6985,#2741);+#6994=ORIENTED_EDGE('',*,*,#6995,.T.);+#6995=EDGE_CURVE('',#6991,#6996,#6998,.T.);+#6996=VERTEX_POINT('',#6997);+#6997=CARTESIAN_POINT('',(-0.575,-4.5,0.1));+#6998=LINE('',#6992,#188);+#6999=ORIENTED_EDGE('',*,*,#7000,.T.);+#7000=EDGE_CURVE('',#6996,#7001,#7003,.T.);+#7001=VERTEX_POINT('',#7002);+#7002=CARTESIAN_POINT('',(-0.575,-4.079347141319,0.1));+#7003=LINE('',#6997,#4055);+#7004=ORIENTED_EDGE('',*,*,#7005,.T.);+#7005=EDGE_CURVE('',#7001,#7006,#7008,.T.);+#7006=VERTEX_POINT('',#7007);+#7007=CARTESIAN_POINT('',(-0.575,-3.980866366018,0.182635182233));+#7008=CIRCLE('',#7009,1.E-01);+#7009=AXIS2_PLACEMENT_3D('',#6988,#6321,#6359);+#7010=ORIENTED_EDGE('',*,*,#7011,.T.);+#7011=EDGE_CURVE('',#7006,#7012,#7014,.T.);+#7012=VERTEX_POINT('',#7013);+#7013=CARTESIAN_POINT('',(-0.575,-3.896961550602,0.684729635533));+#7014=LINE('',#7007,#6365);+#7015=ORIENTED_EDGE('',*,*,#7016,.T.);+#7016=EDGE_CURVE('',#7012,#7017,#7019,.T.);+#7017=VERTEX_POINT('',#7018);+#7018=CARTESIAN_POINT('',(-0.575,-3.7,0.85));+#7019=CIRCLE('',#7020,0.2);+#7020=AXIS2_PLACEMENT_3D('',#6968,#2754,#6372);+#7021=ORIENTED_EDGE('',*,*,#7022,.T.);+#7022=EDGE_CURVE('',#7017,#2918,#7023,.T.);+#7023=LINE('',#7018,#4055);+#7024=PLANE('',#7025);+#7025=AXIS2_PLACEMENT_3D('',#7026,#2754,#13);+#7026=CARTESIAN_POINT('',(-0.575,-3.914276639233,0.410238158856));+#7027=ADVANCED_FACE('',(#7028),#846,.F.);+#7028=FACE_BOUND('',#7029,.F.);+#7029=EDGE_LOOP('',(#7030,#7031,#7037,#7041));+#7030=ORIENTED_EDGE('',*,*,#2930,.T.);+#7031=ORIENTED_EDGE('',*,*,#7032,.T.);+#7032=EDGE_CURVE('',#2925,#7033,#7035,.T.);+#7033=VERTEX_POINT('',#7034);+#7034=CARTESIAN_POINT('',(-1.025,-3.425,0.85));+#7035=LINE('',#7036,#4055);+#7036=CARTESIAN_POINT('',(-1.025,-3.7,0.85));+#7037=ORIENTED_EDGE('',*,*,#7038,.F.);+#7038=EDGE_CURVE('',#7039,#7033,#4049,.T.);+#7039=VERTEX_POINT('',#7040);+#7040=CARTESIAN_POINT('',(-0.575,-3.425,0.85));+#7041=ORIENTED_EDGE('',*,*,#7042,.F.);+#7042=EDGE_CURVE('',#2918,#7039,#7023,.T.);+#7043=ADVANCED_FACE('',(#7044),#7100,.F.);+#7044=FACE_BOUND('',#7045,.F.);+#7045=EDGE_LOOP('',(#7046,#7047,#7048,#7055,#7060,#7067,#7072,#7077,#7082,#7088,#7093,#7098));+#7046=ORIENTED_EDGE('',*,*,#2924,.F.);+#7047=ORIENTED_EDGE('',*,*,#2935,.T.);+#7048=ORIENTED_EDGE('',*,*,#7049,.T.);+#7049=EDGE_CURVE('',#2936,#7050,#7052,.T.);+#7050=VERTEX_POINT('',#7051);+#7051=CARTESIAN_POINT('',(-1.025,-3.798480775301,0.667364817767));+#7052=CIRCLE('',#7053,0.1);+#7053=AXIS2_PLACEMENT_3D('',#7054,#6321,#6322);+#7054=CARTESIAN_POINT('',(-1.025,-3.7,0.65));+#7055=ORIENTED_EDGE('',*,*,#7056,.T.);+#7056=EDGE_CURVE('',#7050,#7057,#7059,.T.);+#7057=VERTEX_POINT('',#7058);+#7058=CARTESIAN_POINT('',(-1.025,-3.882385590716,0.165270364467));+#7059=LINE('',#7051,#6328);+#7060=ORIENTED_EDGE('',*,*,#7061,.T.);+#7061=EDGE_CURVE('',#7057,#7062,#7064,.T.);+#7062=VERTEX_POINT('',#7063);+#7063=CARTESIAN_POINT('',(-1.025,-4.079347141319,1.387778780781E-16));+#7064=CIRCLE('',#7065,0.2);+#7065=AXIS2_PLACEMENT_3D('',#7066,#2754,#6337);+#7066=CARTESIAN_POINT('',(-1.025,-4.079347141319,0.2));+#7067=ORIENTED_EDGE('',*,*,#7068,.T.);+#7068=EDGE_CURVE('',#7062,#7069,#7071,.T.);+#7069=VERTEX_POINT('',#7070);+#7070=CARTESIAN_POINT('',(-1.025,-4.5,1.387778780781E-16));+#7071=LINE('',#7063,#2741);+#7072=ORIENTED_EDGE('',*,*,#7073,.T.);+#7073=EDGE_CURVE('',#7069,#7074,#7076,.T.);+#7074=VERTEX_POINT('',#7075);+#7075=CARTESIAN_POINT('',(-1.025,-4.5,0.1));+#7076=LINE('',#7070,#188);+#7077=ORIENTED_EDGE('',*,*,#7078,.T.);+#7078=EDGE_CURVE('',#7074,#7079,#7081,.T.);+#7079=VERTEX_POINT('',#7080);+#7080=CARTESIAN_POINT('',(-1.025,-4.079347141319,0.1));+#7081=LINE('',#7075,#4055);+#7082=ORIENTED_EDGE('',*,*,#7083,.T.);+#7083=EDGE_CURVE('',#7079,#7084,#7086,.T.);+#7084=VERTEX_POINT('',#7085);+#7085=CARTESIAN_POINT('',(-1.025,-3.980866366018,0.182635182233));+#7086=CIRCLE('',#7087,1.E-01);+#7087=AXIS2_PLACEMENT_3D('',#7066,#6321,#6359);+#7088=ORIENTED_EDGE('',*,*,#7089,.T.);+#7089=EDGE_CURVE('',#7084,#7090,#7092,.T.);+#7090=VERTEX_POINT('',#7091);+#7091=CARTESIAN_POINT('',(-1.025,-3.896961550602,0.684729635533));+#7092=LINE('',#7085,#6365);+#7093=ORIENTED_EDGE('',*,*,#7094,.T.);+#7094=EDGE_CURVE('',#7090,#7095,#7096,.T.);+#7095=VERTEX_POINT('',#7036);+#7096=CIRCLE('',#7097,0.2);+#7097=AXIS2_PLACEMENT_3D('',#7054,#2754,#6372);+#7098=ORIENTED_EDGE('',*,*,#7099,.T.);+#7099=EDGE_CURVE('',#7095,#2925,#7035,.T.);+#7100=PLANE('',#7101);+#7101=AXIS2_PLACEMENT_3D('',#7102,#2754,#13);+#7102=CARTESIAN_POINT('',(-1.025,-3.914276639233,0.410238158856));+#7103=ADVANCED_FACE('',(#7104),#7118,.F.);+#7104=FACE_BOUND('',#7105,.F.);+#7105=EDGE_LOOP('',(#7106,#7107,#7114,#7117));+#7106=ORIENTED_EDGE('',*,*,#2948,.T.);+#7107=ORIENTED_EDGE('',*,*,#7108,.T.);+#7108=EDGE_CURVE('',#2943,#7109,#7111,.T.);+#7109=VERTEX_POINT('',#7110);+#7110=CARTESIAN_POINT('',(-1.375,-3.798480775301,0.667364817767));+#7111=CIRCLE('',#7112,0.1);+#7112=AXIS2_PLACEMENT_3D('',#7113,#6321,#6322);+#7113=CARTESIAN_POINT('',(-1.375,-3.7,0.65));+#7114=ORIENTED_EDGE('',*,*,#7115,.F.);+#7115=EDGE_CURVE('',#7050,#7109,#7116,.T.);+#7116=LINE('',#7051,#2753);+#7117=ORIENTED_EDGE('',*,*,#7049,.F.);+#7118=CYLINDRICAL_SURFACE('',#7053,0.1);+#7119=ADVANCED_FACE('',(#7120),#7169,.T.);+#7120=FACE_BOUND('',#7121,.T.);+#7121=EDGE_LOOP('',(#2955,#2941,#7107,#7122,#7127,#7134,#7139,#7144,#7149,#7155,#7160,#7166));+#7122=ORIENTED_EDGE('',*,*,#7123,.T.);+#7123=EDGE_CURVE('',#7109,#7124,#7126,.T.);+#7124=VERTEX_POINT('',#7125);+#7125=CARTESIAN_POINT('',(-1.375,-3.882385590716,0.165270364467));+#7126=LINE('',#7110,#6328);+#7127=ORIENTED_EDGE('',*,*,#7128,.T.);+#7128=EDGE_CURVE('',#7124,#7129,#7131,.T.);+#7129=VERTEX_POINT('',#7130);+#7130=CARTESIAN_POINT('',(-1.375,-4.079347141319,1.387778780781E-16));+#7131=CIRCLE('',#7132,0.2);+#7132=AXIS2_PLACEMENT_3D('',#7133,#2754,#6337);+#7133=CARTESIAN_POINT('',(-1.375,-4.079347141319,0.2));+#7134=ORIENTED_EDGE('',*,*,#7135,.T.);+#7135=EDGE_CURVE('',#7129,#7136,#7138,.T.);+#7136=VERTEX_POINT('',#7137);+#7137=CARTESIAN_POINT('',(-1.375,-4.5,1.387778780781E-16));+#7138=LINE('',#7130,#2741);+#7139=ORIENTED_EDGE('',*,*,#7140,.T.);+#7140=EDGE_CURVE('',#7136,#7141,#7143,.T.);+#7141=VERTEX_POINT('',#7142);+#7142=CARTESIAN_POINT('',(-1.375,-4.5,0.1));+#7143=LINE('',#7137,#188);+#7144=ORIENTED_EDGE('',*,*,#7145,.T.);+#7145=EDGE_CURVE('',#7141,#7146,#7148,.T.);+#7146=VERTEX_POINT('',#7147);+#7147=CARTESIAN_POINT('',(-1.375,-4.079347141319,0.1));+#7148=LINE('',#7142,#4055);+#7149=ORIENTED_EDGE('',*,*,#7150,.T.);+#7150=EDGE_CURVE('',#7146,#7151,#7153,.T.);+#7151=VERTEX_POINT('',#7152);+#7152=CARTESIAN_POINT('',(-1.375,-3.980866366018,0.182635182233));+#7153=CIRCLE('',#7154,1.E-01);+#7154=AXIS2_PLACEMENT_3D('',#7133,#6321,#6359);+#7155=ORIENTED_EDGE('',*,*,#7156,.T.);+#7156=EDGE_CURVE('',#7151,#7157,#7159,.T.);+#7157=VERTEX_POINT('',#7158);+#7158=CARTESIAN_POINT('',(-1.375,-3.896961550602,0.684729635533));+#7159=LINE('',#7152,#6365);+#7160=ORIENTED_EDGE('',*,*,#7161,.T.);+#7161=EDGE_CURVE('',#7157,#7162,#7164,.T.);+#7162=VERTEX_POINT('',#7163);+#7163=CARTESIAN_POINT('',(-1.375,-3.7,0.85));+#7164=CIRCLE('',#7165,0.2);+#7165=AXIS2_PLACEMENT_3D('',#7113,#2754,#6372);+#7166=ORIENTED_EDGE('',*,*,#7167,.T.);+#7167=EDGE_CURVE('',#7162,#2957,#7168,.T.);+#7168=LINE('',#7163,#4055);+#7169=PLANE('',#7170);+#7170=AXIS2_PLACEMENT_3D('',#7171,#2754,#13);+#7171=CARTESIAN_POINT('',(-1.375,-3.914276639233,0.410238158856));+#7172=ADVANCED_FACE('',(#7173),#846,.F.);+#7173=FACE_BOUND('',#7174,.F.);+#7174=EDGE_LOOP('',(#7175,#7176,#7182,#7186));+#7175=ORIENTED_EDGE('',*,*,#2969,.T.);+#7176=ORIENTED_EDGE('',*,*,#7177,.T.);+#7177=EDGE_CURVE('',#2964,#7178,#7180,.T.);+#7178=VERTEX_POINT('',#7179);+#7179=CARTESIAN_POINT('',(-1.825,-3.425,0.85));+#7180=LINE('',#7181,#4055);+#7181=CARTESIAN_POINT('',(-1.825,-3.7,0.85));+#7182=ORIENTED_EDGE('',*,*,#7183,.F.);+#7183=EDGE_CURVE('',#7184,#7178,#4049,.T.);+#7184=VERTEX_POINT('',#7185);+#7185=CARTESIAN_POINT('',(-1.375,-3.425,0.85));+#7186=ORIENTED_EDGE('',*,*,#7187,.F.);+#7187=EDGE_CURVE('',#2957,#7184,#7168,.T.);+#7188=ADVANCED_FACE('',(#7189),#7245,.F.);+#7189=FACE_BOUND('',#7190,.F.);+#7190=EDGE_LOOP('',(#7191,#7192,#7193,#7200,#7205,#7212,#7217,#7222,#7227,#7233,#7238,#7243));+#7191=ORIENTED_EDGE('',*,*,#2963,.F.);+#7192=ORIENTED_EDGE('',*,*,#2974,.T.);+#7193=ORIENTED_EDGE('',*,*,#7194,.T.);+#7194=EDGE_CURVE('',#2975,#7195,#7197,.T.);+#7195=VERTEX_POINT('',#7196);+#7196=CARTESIAN_POINT('',(-1.825,-3.798480775301,0.667364817767));+#7197=CIRCLE('',#7198,0.1);+#7198=AXIS2_PLACEMENT_3D('',#7199,#6321,#6322);+#7199=CARTESIAN_POINT('',(-1.825,-3.7,0.65));+#7200=ORIENTED_EDGE('',*,*,#7201,.T.);+#7201=EDGE_CURVE('',#7195,#7202,#7204,.T.);+#7202=VERTEX_POINT('',#7203);+#7203=CARTESIAN_POINT('',(-1.825,-3.882385590716,0.165270364467));+#7204=LINE('',#7196,#6328);+#7205=ORIENTED_EDGE('',*,*,#7206,.T.);+#7206=EDGE_CURVE('',#7202,#7207,#7209,.T.);+#7207=VERTEX_POINT('',#7208);+#7208=CARTESIAN_POINT('',(-1.825,-4.079347141319,1.387778780781E-16));+#7209=CIRCLE('',#7210,0.2);+#7210=AXIS2_PLACEMENT_3D('',#7211,#2754,#6337);+#7211=CARTESIAN_POINT('',(-1.825,-4.079347141319,0.2));+#7212=ORIENTED_EDGE('',*,*,#7213,.T.);+#7213=EDGE_CURVE('',#7207,#7214,#7216,.T.);+#7214=VERTEX_POINT('',#7215);+#7215=CARTESIAN_POINT('',(-1.825,-4.5,1.387778780781E-16));+#7216=LINE('',#7208,#2741);+#7217=ORIENTED_EDGE('',*,*,#7218,.T.);+#7218=EDGE_CURVE('',#7214,#7219,#7221,.T.);+#7219=VERTEX_POINT('',#7220);+#7220=CARTESIAN_POINT('',(-1.825,-4.5,0.1));+#7221=LINE('',#7215,#188);+#7222=ORIENTED_EDGE('',*,*,#7223,.T.);+#7223=EDGE_CURVE('',#7219,#7224,#7226,.T.);+#7224=VERTEX_POINT('',#7225);+#7225=CARTESIAN_POINT('',(-1.825,-4.079347141319,0.1));+#7226=LINE('',#7220,#4055);+#7227=ORIENTED_EDGE('',*,*,#7228,.T.);+#7228=EDGE_CURVE('',#7224,#7229,#7231,.T.);+#7229=VERTEX_POINT('',#7230);+#7230=CARTESIAN_POINT('',(-1.825,-3.980866366018,0.182635182233));+#7231=CIRCLE('',#7232,1.E-01);+#7232=AXIS2_PLACEMENT_3D('',#7211,#6321,#6359);+#7233=ORIENTED_EDGE('',*,*,#7234,.T.);+#7234=EDGE_CURVE('',#7229,#7235,#7237,.T.);+#7235=VERTEX_POINT('',#7236);+#7236=CARTESIAN_POINT('',(-1.825,-3.896961550602,0.684729635533));+#7237=LINE('',#7230,#6365);+#7238=ORIENTED_EDGE('',*,*,#7239,.T.);+#7239=EDGE_CURVE('',#7235,#7240,#7241,.T.);+#7240=VERTEX_POINT('',#7181);+#7241=CIRCLE('',#7242,0.2);+#7242=AXIS2_PLACEMENT_3D('',#7199,#2754,#6372);+#7243=ORIENTED_EDGE('',*,*,#7244,.T.);+#7244=EDGE_CURVE('',#7240,#2964,#7180,.T.);+#7245=PLANE('',#7246);+#7246=AXIS2_PLACEMENT_3D('',#7247,#2754,#13);+#7247=CARTESIAN_POINT('',(-1.825,-3.914276639233,0.410238158856));+#7248=ADVANCED_FACE('',(#7249),#7263,.F.);+#7249=FACE_BOUND('',#7250,.F.);+#7250=EDGE_LOOP('',(#7251,#7252,#7259,#7262));+#7251=ORIENTED_EDGE('',*,*,#2987,.T.);+#7252=ORIENTED_EDGE('',*,*,#7253,.T.);+#7253=EDGE_CURVE('',#2982,#7254,#7256,.T.);+#7254=VERTEX_POINT('',#7255);+#7255=CARTESIAN_POINT('',(-2.175,-3.798480775301,0.667364817767));+#7256=CIRCLE('',#7257,0.1);+#7257=AXIS2_PLACEMENT_3D('',#7258,#6321,#6322);+#7258=CARTESIAN_POINT('',(-2.175,-3.7,0.65));+#7259=ORIENTED_EDGE('',*,*,#7260,.F.);+#7260=EDGE_CURVE('',#7195,#7254,#7261,.T.);+#7261=LINE('',#7196,#2753);+#7262=ORIENTED_EDGE('',*,*,#7194,.F.);+#7263=CYLINDRICAL_SURFACE('',#7198,0.1);+#7264=ADVANCED_FACE('',(#7265),#7314,.T.);+#7265=FACE_BOUND('',#7266,.T.);+#7266=EDGE_LOOP('',(#2994,#2980,#7252,#7267,#7272,#7279,#7284,#7289,#7294,#7300,#7305,#7311));+#7267=ORIENTED_EDGE('',*,*,#7268,.T.);+#7268=EDGE_CURVE('',#7254,#7269,#7271,.T.);+#7269=VERTEX_POINT('',#7270);+#7270=CARTESIAN_POINT('',(-2.175,-3.882385590716,0.165270364467));+#7271=LINE('',#7255,#6328);+#7272=ORIENTED_EDGE('',*,*,#7273,.T.);+#7273=EDGE_CURVE('',#7269,#7274,#7276,.T.);+#7274=VERTEX_POINT('',#7275);+#7275=CARTESIAN_POINT('',(-2.175,-4.079347141319,1.387778780781E-16));+#7276=CIRCLE('',#7277,0.2);+#7277=AXIS2_PLACEMENT_3D('',#7278,#2754,#6337);+#7278=CARTESIAN_POINT('',(-2.175,-4.079347141319,0.2));+#7279=ORIENTED_EDGE('',*,*,#7280,.T.);+#7280=EDGE_CURVE('',#7274,#7281,#7283,.T.);+#7281=VERTEX_POINT('',#7282);+#7282=CARTESIAN_POINT('',(-2.175,-4.5,1.387778780781E-16));+#7283=LINE('',#7275,#2741);+#7284=ORIENTED_EDGE('',*,*,#7285,.T.);+#7285=EDGE_CURVE('',#7281,#7286,#7288,.T.);+#7286=VERTEX_POINT('',#7287);+#7287=CARTESIAN_POINT('',(-2.175,-4.5,0.1));+#7288=LINE('',#7282,#188);+#7289=ORIENTED_EDGE('',*,*,#7290,.T.);+#7290=EDGE_CURVE('',#7286,#7291,#7293,.T.);+#7291=VERTEX_POINT('',#7292);+#7292=CARTESIAN_POINT('',(-2.175,-4.079347141319,0.1));+#7293=LINE('',#7287,#4055);+#7294=ORIENTED_EDGE('',*,*,#7295,.T.);+#7295=EDGE_CURVE('',#7291,#7296,#7298,.T.);+#7296=VERTEX_POINT('',#7297);+#7297=CARTESIAN_POINT('',(-2.175,-3.980866366018,0.182635182233));+#7298=CIRCLE('',#7299,1.E-01);+#7299=AXIS2_PLACEMENT_3D('',#7278,#6321,#6359);+#7300=ORIENTED_EDGE('',*,*,#7301,.T.);+#7301=EDGE_CURVE('',#7296,#7302,#7304,.T.);+#7302=VERTEX_POINT('',#7303);+#7303=CARTESIAN_POINT('',(-2.175,-3.896961550602,0.684729635533));+#7304=LINE('',#7297,#6365);+#7305=ORIENTED_EDGE('',*,*,#7306,.T.);+#7306=EDGE_CURVE('',#7302,#7307,#7309,.T.);+#7307=VERTEX_POINT('',#7308);+#7308=CARTESIAN_POINT('',(-2.175,-3.7,0.85));+#7309=CIRCLE('',#7310,0.2);+#7310=AXIS2_PLACEMENT_3D('',#7258,#2754,#6372);+#7311=ORIENTED_EDGE('',*,*,#7312,.T.);+#7312=EDGE_CURVE('',#7307,#2996,#7313,.T.);+#7313=LINE('',#7308,#4055);+#7314=PLANE('',#7315);+#7315=AXIS2_PLACEMENT_3D('',#7316,#2754,#13);+#7316=CARTESIAN_POINT('',(-2.175,-3.914276639233,0.410238158856));+#7317=ADVANCED_FACE('',(#7318),#846,.F.);+#7318=FACE_BOUND('',#7319,.F.);+#7319=EDGE_LOOP('',(#7320,#7321,#7327,#7331));+#7320=ORIENTED_EDGE('',*,*,#3008,.T.);+#7321=ORIENTED_EDGE('',*,*,#7322,.T.);+#7322=EDGE_CURVE('',#3003,#7323,#7325,.T.);+#7323=VERTEX_POINT('',#7324);+#7324=CARTESIAN_POINT('',(-2.625,-3.425,0.85));+#7325=LINE('',#7326,#4055);+#7326=CARTESIAN_POINT('',(-2.625,-3.7,0.85));+#7327=ORIENTED_EDGE('',*,*,#7328,.F.);+#7328=EDGE_CURVE('',#7329,#7323,#4049,.T.);+#7329=VERTEX_POINT('',#7330);+#7330=CARTESIAN_POINT('',(-2.175,-3.425,0.85));+#7331=ORIENTED_EDGE('',*,*,#7332,.F.);+#7332=EDGE_CURVE('',#2996,#7329,#7313,.T.);+#7333=ADVANCED_FACE('',(#7334),#7390,.F.);+#7334=FACE_BOUND('',#7335,.F.);+#7335=EDGE_LOOP('',(#7336,#7337,#7338,#7345,#7350,#7357,#7362,#7367,#7372,#7378,#7383,#7388));+#7336=ORIENTED_EDGE('',*,*,#3002,.F.);+#7337=ORIENTED_EDGE('',*,*,#3013,.T.);+#7338=ORIENTED_EDGE('',*,*,#7339,.T.);+#7339=EDGE_CURVE('',#3014,#7340,#7342,.T.);+#7340=VERTEX_POINT('',#7341);+#7341=CARTESIAN_POINT('',(-2.625,-3.798480775301,0.667364817767));+#7342=CIRCLE('',#7343,0.1);+#7343=AXIS2_PLACEMENT_3D('',#7344,#6321,#6322);+#7344=CARTESIAN_POINT('',(-2.625,-3.7,0.65));+#7345=ORIENTED_EDGE('',*,*,#7346,.T.);+#7346=EDGE_CURVE('',#7340,#7347,#7349,.T.);+#7347=VERTEX_POINT('',#7348);+#7348=CARTESIAN_POINT('',(-2.625,-3.882385590716,0.165270364467));+#7349=LINE('',#7341,#6328);+#7350=ORIENTED_EDGE('',*,*,#7351,.T.);+#7351=EDGE_CURVE('',#7347,#7352,#7354,.T.);+#7352=VERTEX_POINT('',#7353);+#7353=CARTESIAN_POINT('',(-2.625,-4.079347141319,1.387778780781E-16));+#7354=CIRCLE('',#7355,0.2);+#7355=AXIS2_PLACEMENT_3D('',#7356,#2754,#6337);+#7356=CARTESIAN_POINT('',(-2.625,-4.079347141319,0.2));+#7357=ORIENTED_EDGE('',*,*,#7358,.T.);+#7358=EDGE_CURVE('',#7352,#7359,#7361,.T.);+#7359=VERTEX_POINT('',#7360);+#7360=CARTESIAN_POINT('',(-2.625,-4.5,1.387778780781E-16));+#7361=LINE('',#7353,#2741);+#7362=ORIENTED_EDGE('',*,*,#7363,.T.);+#7363=EDGE_CURVE('',#7359,#7364,#7366,.T.);+#7364=VERTEX_POINT('',#7365);+#7365=CARTESIAN_POINT('',(-2.625,-4.5,0.1));+#7366=LINE('',#7360,#188);+#7367=ORIENTED_EDGE('',*,*,#7368,.T.);+#7368=EDGE_CURVE('',#7364,#7369,#7371,.T.);+#7369=VERTEX_POINT('',#7370);+#7370=CARTESIAN_POINT('',(-2.625,-4.079347141319,0.1));+#7371=LINE('',#7365,#4055);+#7372=ORIENTED_EDGE('',*,*,#7373,.T.);+#7373=EDGE_CURVE('',#7369,#7374,#7376,.T.);+#7374=VERTEX_POINT('',#7375);+#7375=CARTESIAN_POINT('',(-2.625,-3.980866366018,0.182635182233));+#7376=CIRCLE('',#7377,1.E-01);+#7377=AXIS2_PLACEMENT_3D('',#7356,#6321,#6359);+#7378=ORIENTED_EDGE('',*,*,#7379,.T.);+#7379=EDGE_CURVE('',#7374,#7380,#7382,.T.);+#7380=VERTEX_POINT('',#7381);+#7381=CARTESIAN_POINT('',(-2.625,-3.896961550602,0.684729635533));+#7382=LINE('',#7375,#6365);+#7383=ORIENTED_EDGE('',*,*,#7384,.T.);+#7384=EDGE_CURVE('',#7380,#7385,#7386,.T.);+#7385=VERTEX_POINT('',#7326);+#7386=CIRCLE('',#7387,0.2);+#7387=AXIS2_PLACEMENT_3D('',#7344,#2754,#6372);+#7388=ORIENTED_EDGE('',*,*,#7389,.T.);+#7389=EDGE_CURVE('',#7385,#3003,#7325,.T.);+#7390=PLANE('',#7391);+#7391=AXIS2_PLACEMENT_3D('',#7392,#2754,#13);+#7392=CARTESIAN_POINT('',(-2.625,-3.914276639233,0.410238158856));+#7393=ADVANCED_FACE('',(#7394),#7408,.F.);+#7394=FACE_BOUND('',#7395,.F.);+#7395=EDGE_LOOP('',(#7396,#7397,#7404,#7407));+#7396=ORIENTED_EDGE('',*,*,#3026,.T.);+#7397=ORIENTED_EDGE('',*,*,#7398,.T.);+#7398=EDGE_CURVE('',#3021,#7399,#7401,.T.);+#7399=VERTEX_POINT('',#7400);+#7400=CARTESIAN_POINT('',(-2.975,-3.798480775301,0.667364817767));+#7401=CIRCLE('',#7402,0.1);+#7402=AXIS2_PLACEMENT_3D('',#7403,#6321,#6322);+#7403=CARTESIAN_POINT('',(-2.975,-3.7,0.65));+#7404=ORIENTED_EDGE('',*,*,#7405,.F.);+#7405=EDGE_CURVE('',#7340,#7399,#7406,.T.);+#7406=LINE('',#7341,#2753);+#7407=ORIENTED_EDGE('',*,*,#7339,.F.);+#7408=CYLINDRICAL_SURFACE('',#7343,0.1);+#7409=ADVANCED_FACE('',(#7410),#7457,.T.);+#7410=FACE_BOUND('',#7411,.T.);+#7411=EDGE_LOOP('',(#3033,#3019,#7397,#7412,#7417,#7424,#7429,#7434,#7439,#7445,#7450,#7455));+#7412=ORIENTED_EDGE('',*,*,#7413,.T.);+#7413=EDGE_CURVE('',#7399,#7414,#7416,.T.);+#7414=VERTEX_POINT('',#7415);+#7415=CARTESIAN_POINT('',(-2.975,-3.882385590716,0.165270364467));+#7416=LINE('',#7400,#6328);+#7417=ORIENTED_EDGE('',*,*,#7418,.T.);+#7418=EDGE_CURVE('',#7414,#7419,#7421,.T.);+#7419=VERTEX_POINT('',#7420);+#7420=CARTESIAN_POINT('',(-2.975,-4.079347141319,1.387778780781E-16));+#7421=CIRCLE('',#7422,0.2);+#7422=AXIS2_PLACEMENT_3D('',#7423,#2754,#6337);+#7423=CARTESIAN_POINT('',(-2.975,-4.079347141319,0.2));+#7424=ORIENTED_EDGE('',*,*,#7425,.T.);+#7425=EDGE_CURVE('',#7419,#7426,#7428,.T.);+#7426=VERTEX_POINT('',#7427);+#7427=CARTESIAN_POINT('',(-2.975,-4.5,1.387778780781E-16));+#7428=LINE('',#7420,#2741);+#7429=ORIENTED_EDGE('',*,*,#7430,.T.);+#7430=EDGE_CURVE('',#7426,#7431,#7433,.T.);+#7431=VERTEX_POINT('',#7432);+#7432=CARTESIAN_POINT('',(-2.975,-4.5,0.1));+#7433=LINE('',#7427,#188);+#7434=ORIENTED_EDGE('',*,*,#7435,.T.);+#7435=EDGE_CURVE('',#7431,#7436,#7438,.T.);+#7436=VERTEX_POINT('',#7437);+#7437=CARTESIAN_POINT('',(-2.975,-4.079347141319,0.1));+#7438=LINE('',#7432,#4055);+#7439=ORIENTED_EDGE('',*,*,#7440,.T.);+#7440=EDGE_CURVE('',#7436,#7441,#7443,.T.);+#7441=VERTEX_POINT('',#7442);+#7442=CARTESIAN_POINT('',(-2.975,-3.980866366018,0.182635182233));+#7443=CIRCLE('',#7444,1.E-01);+#7444=AXIS2_PLACEMENT_3D('',#7423,#6321,#6359);+#7445=ORIENTED_EDGE('',*,*,#7446,.T.);+#7446=EDGE_CURVE('',#7441,#7447,#7449,.T.);+#7447=VERTEX_POINT('',#7448);+#7448=CARTESIAN_POINT('',(-2.975,-3.896961550602,0.684729635533));+#7449=LINE('',#7442,#6365);+#7450=ORIENTED_EDGE('',*,*,#7451,.T.);+#7451=EDGE_CURVE('',#7447,#7452,#7453,.T.);+#7452=VERTEX_POINT('',#4054);+#7453=CIRCLE('',#7454,0.2);+#7454=AXIS2_PLACEMENT_3D('',#7403,#2754,#6372);+#7455=ORIENTED_EDGE('',*,*,#7456,.T.);+#7456=EDGE_CURVE('',#7452,#3035,#4053,.T.);+#7457=PLANE('',#7458);+#7458=AXIS2_PLACEMENT_3D('',#7459,#2754,#13);+#7459=CARTESIAN_POINT('',(-2.975,-3.914276639233,0.410238158856));+#7460=ADVANCED_FACE('',(#7461),#7468,.T.);+#7461=FACE_BOUND('',#7462,.F.);+#7462=EDGE_LOOP('',(#7463,#5172,#7466,#7467));+#7463=ORIENTED_EDGE('',*,*,#7464,.T.);+#7464=EDGE_CURVE('',#5103,#5169,#7465,.T.);+#7465=LINE('',#5104,#2076);+#7466=ORIENTED_EDGE('',*,*,#3052,.F.);+#7467=ORIENTED_EDGE('',*,*,#5107,.F.);+#7468=CYLINDRICAL_SURFACE('',#7469,0.2);+#7469=AXIS2_PLACEMENT_3D('',#5067,#4148,#4125);+#7470=ADVANCED_FACE('',(#7471),#7480,.F.);+#7471=FACE_BOUND('',#7472,.F.);+#7472=EDGE_LOOP('',(#7473,#7474,#4196,#7477,#7478,#7479));+#7473=ORIENTED_EDGE('',*,*,#4127,.F.);+#7474=ORIENTED_EDGE('',*,*,#7475,.T.);+#7475=EDGE_CURVE('',#4121,#4192,#7476,.T.);+#7476=LINE('',#4038,#2076);+#7477=ORIENTED_EDGE('',*,*,#4212,.T.);+#7478=ORIENTED_EDGE('',*,*,#3076,.F.);+#7479=ORIENTED_EDGE('',*,*,#4036,.F.);+#7480=PLANE('',#7481);+#7481=AXIS2_PLACEMENT_3D('',#4038,#3066,#841);+#7482=ADVANCED_FACE('',(#7483),#7492,.F.);+#7483=FACE_BOUND('',#7484,.F.);+#7484=EDGE_LOOP('',(#7485,#7486,#4337,#7489,#7490,#7491));+#7485=ORIENTED_EDGE('',*,*,#4269,.F.);+#7486=ORIENTED_EDGE('',*,*,#7487,.T.);+#7487=EDGE_CURVE('',#4265,#4333,#7488,.T.);+#7488=LINE('',#4209,#2076);+#7489=ORIENTED_EDGE('',*,*,#4353,.T.);+#7490=ORIENTED_EDGE('',*,*,#3084,.F.);+#7491=ORIENTED_EDGE('',*,*,#4207,.F.);+#7492=PLANE('',#7493);+#7493=AXIS2_PLACEMENT_3D('',#4209,#3066,#841);+#7494=ADVANCED_FACE('',(#7495),#7504,.F.);+#7495=FACE_BOUND('',#7496,.F.);+#7496=EDGE_LOOP('',(#7497,#7498,#4478,#7501,#7502,#7503));+#7497=ORIENTED_EDGE('',*,*,#4410,.F.);+#7498=ORIENTED_EDGE('',*,*,#7499,.T.);+#7499=EDGE_CURVE('',#4406,#4474,#7500,.T.);+#7500=LINE('',#4350,#2076);+#7501=ORIENTED_EDGE('',*,*,#4494,.T.);+#7502=ORIENTED_EDGE('',*,*,#3092,.F.);+#7503=ORIENTED_EDGE('',*,*,#4348,.F.);+#7504=PLANE('',#7505);+#7505=AXIS2_PLACEMENT_3D('',#4350,#3066,#841);+#7506=ADVANCED_FACE('',(#7507),#7516,.F.);+#7507=FACE_BOUND('',#7508,.F.);+#7508=EDGE_LOOP('',(#7509,#7510,#4619,#7513,#7514,#7515));+#7509=ORIENTED_EDGE('',*,*,#4551,.F.);+#7510=ORIENTED_EDGE('',*,*,#7511,.T.);+#7511=EDGE_CURVE('',#4547,#4615,#7512,.T.);+#7512=LINE('',#4491,#2076);+#7513=ORIENTED_EDGE('',*,*,#4635,.T.);+#7514=ORIENTED_EDGE('',*,*,#3100,.F.);+#7515=ORIENTED_EDGE('',*,*,#4489,.F.);+#7516=PLANE('',#7517);+#7517=AXIS2_PLACEMENT_3D('',#4491,#3066,#841);+#7518=ADVANCED_FACE('',(#7519),#7528,.F.);+#7519=FACE_BOUND('',#7520,.F.);+#7520=EDGE_LOOP('',(#7521,#7522,#4760,#7525,#7526,#7527));+#7521=ORIENTED_EDGE('',*,*,#4692,.F.);+#7522=ORIENTED_EDGE('',*,*,#7523,.T.);+#7523=EDGE_CURVE('',#4688,#4756,#7524,.T.);+#7524=LINE('',#4632,#2076);+#7525=ORIENTED_EDGE('',*,*,#4776,.T.);+#7526=ORIENTED_EDGE('',*,*,#3108,.F.);+#7527=ORIENTED_EDGE('',*,*,#4630,.F.);+#7528=PLANE('',#7529);+#7529=AXIS2_PLACEMENT_3D('',#4632,#3066,#841);+#7530=ADVANCED_FACE('',(#7531),#7540,.F.);+#7531=FACE_BOUND('',#7532,.F.);+#7532=EDGE_LOOP('',(#7533,#7534,#4901,#7537,#7538,#7539));+#7533=ORIENTED_EDGE('',*,*,#4833,.F.);+#7534=ORIENTED_EDGE('',*,*,#7535,.T.);+#7535=EDGE_CURVE('',#4829,#4897,#7536,.T.);+#7536=LINE('',#4773,#2076);+#7537=ORIENTED_EDGE('',*,*,#4917,.T.);+#7538=ORIENTED_EDGE('',*,*,#3116,.F.);+#7539=ORIENTED_EDGE('',*,*,#4771,.F.);+#7540=PLANE('',#7541);+#7541=AXIS2_PLACEMENT_3D('',#4773,#3066,#841);+#7542=ADVANCED_FACE('',(#7543),#7552,.F.);+#7543=FACE_BOUND('',#7544,.F.);+#7544=EDGE_LOOP('',(#7545,#7546,#5042,#7549,#7550,#7551));+#7545=ORIENTED_EDGE('',*,*,#4974,.F.);+#7546=ORIENTED_EDGE('',*,*,#7547,.T.);+#7547=EDGE_CURVE('',#4970,#5038,#7548,.T.);+#7548=LINE('',#4914,#2076);+#7549=ORIENTED_EDGE('',*,*,#5055,.T.);+#7550=ORIENTED_EDGE('',*,*,#3124,.F.);+#7551=ORIENTED_EDGE('',*,*,#4912,.F.);+#7552=PLANE('',#7553);+#7553=AXIS2_PLACEMENT_3D('',#4914,#3066,#841);+#7554=ADVANCED_FACE('',(#7555,#7570),#7580,.T.);+#7555=FACE_BOUND('',#7556,.T.);+#7556=EDGE_LOOP('',(#3192,#3154,#3136,#7557,#7562,#7567,#4006,#3928));+#7557=ORIENTED_EDGE('',*,*,#7558,.F.);+#7558=EDGE_CURVE('',#7559,#3138,#7561,.T.);+#7559=VERTEX_POINT('',#7560);+#7560=CARTESIAN_POINT('',(-3.218419117457,-3.286838234914,1.5));+#7561=LINE('',#7560,#143);+#7562=ORIENTED_EDGE('',*,*,#7563,.F.);+#7563=EDGE_CURVE('',#7564,#7559,#7566,.T.);+#7564=VERTEX_POINT('',#7565);+#7565=CARTESIAN_POINT('',(3.218419117457,-3.286838234914,1.5));+#7566=LINE('',#7565,#136);+#7567=ORIENTED_EDGE('',*,*,#7568,.F.);+#7568=EDGE_CURVE('',#4003,#7564,#7569,.T.);+#7569=LINE('',#4004,#129);+#7570=FACE_BOUND('',#7571,.T.);+#7571=EDGE_LOOP('',(#7572));+#7572=ORIENTED_EDGE('',*,*,#7573,.T.);+#7573=EDGE_CURVE('',#7574,#7574,#7576,.T.);+#7574=VERTEX_POINT('',#7575);+#7575=CARTESIAN_POINT('',(-2.586838234914,2.336838234914,1.5));+#7576=CIRCLE('',#7577,0.25);+#7577=AXIS2_PLACEMENT_3D('',#7578,#7579,#123);+#7578=CARTESIAN_POINT('',(-2.586838234914,2.586838234914,1.5));+#7579=DIRECTION('',(0.,-0.,-1.));+#7580=PLANE('',#7581);+#7581=AXIS2_PLACEMENT_3D('',#3152,#13,#7582);+#7582=DIRECTION('',(0.699631082812,-0.714504267281,0.));+#7583=ADVANCED_FACE('',(#7584),#7591,.F.);+#7584=FACE_BOUND('',#7585,.F.);+#7585=EDGE_LOOP('',(#7586,#7587,#7557,#7588));+#7586=ORIENTED_EDGE('',*,*,#4041,.T.);+#7587=ORIENTED_EDGE('',*,*,#3142,.T.);+#7588=ORIENTED_EDGE('',*,*,#7589,.F.);+#7589=EDGE_CURVE('',#4042,#7559,#7590,.T.);+#7590=B_SPLINE_CURVE_WITH_KNOTS('',1,(#4043,#7560),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7591=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#4043,#7560),(#833,#3139)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7592=ADVANCED_FACE('',(#7593),#7602,.F.);+#7593=FACE_BOUND('',#7594,.F.);+#7594=EDGE_LOOP('',(#7595,#7596,#5442,#7599,#7600,#7601));+#7595=ORIENTED_EDGE('',*,*,#5375,.F.);+#7596=ORIENTED_EDGE('',*,*,#7597,.T.);+#7597=EDGE_CURVE('',#5371,#5438,#7598,.T.);+#7598=LINE('',#5317,#122);+#7599=ORIENTED_EDGE('',*,*,#5452,.T.);+#7600=ORIENTED_EDGE('',*,*,#3946,.F.);+#7601=ORIENTED_EDGE('',*,*,#5315,.F.);+#7602=PLANE('',#7603);+#7603=AXIS2_PLACEMENT_3D('',#5317,#3066,#137);+#7604=ADVANCED_FACE('',(#7605),#7614,.F.);+#7605=FACE_BOUND('',#7606,.F.);+#7606=EDGE_LOOP('',(#7607,#7608,#5582,#7611,#7612,#7613));+#7607=ORIENTED_EDGE('',*,*,#5515,.F.);+#7608=ORIENTED_EDGE('',*,*,#7609,.T.);+#7609=EDGE_CURVE('',#5511,#5578,#7610,.T.);+#7610=LINE('',#5457,#122);+#7611=ORIENTED_EDGE('',*,*,#5592,.T.);+#7612=ORIENTED_EDGE('',*,*,#3954,.F.);+#7613=ORIENTED_EDGE('',*,*,#5455,.F.);+#7614=PLANE('',#7615);+#7615=AXIS2_PLACEMENT_3D('',#5457,#3066,#137);+#7616=ADVANCED_FACE('',(#7617),#7626,.F.);+#7617=FACE_BOUND('',#7618,.F.);+#7618=EDGE_LOOP('',(#7619,#7620,#5722,#7623,#7624,#7625));+#7619=ORIENTED_EDGE('',*,*,#5655,.F.);+#7620=ORIENTED_EDGE('',*,*,#7621,.T.);+#7621=EDGE_CURVE('',#5651,#5718,#7622,.T.);+#7622=LINE('',#5597,#122);+#7623=ORIENTED_EDGE('',*,*,#5732,.T.);+#7624=ORIENTED_EDGE('',*,*,#3962,.F.);+#7625=ORIENTED_EDGE('',*,*,#5595,.F.);+#7626=PLANE('',#7627);+#7627=AXIS2_PLACEMENT_3D('',#5597,#3066,#137);+#7628=ADVANCED_FACE('',(#7629),#7638,.F.);+#7629=FACE_BOUND('',#7630,.F.);+#7630=EDGE_LOOP('',(#7631,#7632,#5862,#7635,#7636,#7637));+#7631=ORIENTED_EDGE('',*,*,#5795,.F.);+#7632=ORIENTED_EDGE('',*,*,#7633,.T.);+#7633=EDGE_CURVE('',#5791,#5858,#7634,.T.);+#7634=LINE('',#5737,#122);+#7635=ORIENTED_EDGE('',*,*,#5872,.T.);+#7636=ORIENTED_EDGE('',*,*,#3970,.F.);+#7637=ORIENTED_EDGE('',*,*,#5735,.F.);+#7638=PLANE('',#7639);+#7639=AXIS2_PLACEMENT_3D('',#5737,#3066,#137);+#7640=ADVANCED_FACE('',(#7641),#7650,.F.);+#7641=FACE_BOUND('',#7642,.F.);+#7642=EDGE_LOOP('',(#7643,#7644,#6002,#7647,#7648,#7649));+#7643=ORIENTED_EDGE('',*,*,#5935,.F.);+#7644=ORIENTED_EDGE('',*,*,#7645,.T.);+#7645=EDGE_CURVE('',#5931,#5998,#7646,.T.);+#7646=LINE('',#5877,#122);+#7647=ORIENTED_EDGE('',*,*,#6012,.T.);+#7648=ORIENTED_EDGE('',*,*,#3978,.F.);+#7649=ORIENTED_EDGE('',*,*,#5875,.F.);+#7650=PLANE('',#7651);+#7651=AXIS2_PLACEMENT_3D('',#5877,#3066,#137);+#7652=ADVANCED_FACE('',(#7653),#7662,.F.);+#7653=FACE_BOUND('',#7654,.F.);+#7654=EDGE_LOOP('',(#7655,#7656,#6142,#7659,#7660,#7661));+#7655=ORIENTED_EDGE('',*,*,#6075,.F.);+#7656=ORIENTED_EDGE('',*,*,#7657,.T.);+#7657=EDGE_CURVE('',#6071,#6138,#7658,.T.);+#7658=LINE('',#6017,#122);+#7659=ORIENTED_EDGE('',*,*,#6152,.T.);+#7660=ORIENTED_EDGE('',*,*,#3986,.F.);+#7661=ORIENTED_EDGE('',*,*,#6015,.F.);+#7662=PLANE('',#7663);+#7663=AXIS2_PLACEMENT_3D('',#6017,#3066,#137);+#7664=ADVANCED_FACE('',(#7665),#7674,.F.);+#7665=FACE_BOUND('',#7666,.F.);+#7666=EDGE_LOOP('',(#7667,#7668,#6282,#7671,#7672,#7673));+#7667=ORIENTED_EDGE('',*,*,#6215,.F.);+#7668=ORIENTED_EDGE('',*,*,#7669,.T.);+#7669=EDGE_CURVE('',#6211,#6278,#7670,.T.);+#7670=LINE('',#6157,#122);+#7671=ORIENTED_EDGE('',*,*,#6292,.T.);+#7672=ORIENTED_EDGE('',*,*,#3994,.F.);+#7673=ORIENTED_EDGE('',*,*,#6155,.F.);+#7674=PLANE('',#7675);+#7675=AXIS2_PLACEMENT_3D('',#6157,#3066,#137);+#7676=ADVANCED_FACE('',(#7677),#7684,.F.);+#7677=FACE_BOUND('',#7678,.F.);+#7678=EDGE_LOOP('',(#7679,#7680,#7567,#7683));+#7679=ORIENTED_EDGE('',*,*,#6306,.T.);+#7680=ORIENTED_EDGE('',*,*,#7681,.T.);+#7681=EDGE_CURVE('',#6304,#7564,#7682,.T.);+#7682=B_SPLINE_CURVE_WITH_KNOTS('',1,(#4050,#7565),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7683=ORIENTED_EDGE('',*,*,#4002,.F.);+#7684=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#4000,#4004),(#4050,#7565)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7685=ADVANCED_FACE('',(#7686),#7693,.T.);+#7686=FACE_BOUND('',#7687,.F.);+#7687=EDGE_LOOP('',(#7688,#5302,#7691,#7692));+#7688=ORIENTED_EDGE('',*,*,#7689,.T.);+#7689=EDGE_CURVE('',#5231,#5299,#7690,.T.);+#7690=LINE('',#5232,#122);+#7691=ORIENTED_EDGE('',*,*,#4018,.F.);+#7692=ORIENTED_EDGE('',*,*,#5237,.F.);+#7693=CYLINDRICAL_SURFACE('',#7694,0.2);+#7694=AXIS2_PLACEMENT_3D('',#5190,#151,#5240);+#7695=ADVANCED_FACE('',(#7696),#7706,.F.);+#7696=FACE_BOUND('',#7697,.F.);+#7697=EDGE_LOOP('',(#7698,#7699,#7455,#7702,#7703,#7705));+#7698=ORIENTED_EDGE('',*,*,#7389,.F.);+#7699=ORIENTED_EDGE('',*,*,#7700,.T.);+#7700=EDGE_CURVE('',#7385,#7452,#7701,.T.);+#7701=LINE('',#7326,#2753);+#7702=ORIENTED_EDGE('',*,*,#4052,.T.);+#7703=ORIENTED_EDGE('',*,*,#7704,.F.);+#7704=EDGE_CURVE('',#7323,#4047,#4049,.T.);+#7705=ORIENTED_EDGE('',*,*,#7322,.F.);+#7706=PLANE('',#7707);+#7707=AXIS2_PLACEMENT_3D('',#7326,#3066,#4056);+#7708=ADVANCED_FACE('',(#7709),#7737,.F.);+#7709=FACE_BOUND('',#7710,.F.);+#7710=EDGE_LOOP('',(#7711,#7712,#7714,#7715,#7717,#7718,#7720,#7721,#7723,#7724,#7726,#7727,#7729,#7730,#7732,#7733,#7734,#7735,#7562,#7736));+#7711=ORIENTED_EDGE('',*,*,#6303,.T.);+#7712=ORIENTED_EDGE('',*,*,#7713,.T.);+#7713=EDGE_CURVE('',#6298,#6459,#4049,.T.);+#7714=ORIENTED_EDGE('',*,*,#6458,.T.);+#7715=ORIENTED_EDGE('',*,*,#7716,.T.);+#7716=EDGE_CURVE('',#6453,#6604,#4049,.T.);+#7717=ORIENTED_EDGE('',*,*,#6603,.T.);+#7718=ORIENTED_EDGE('',*,*,#7719,.T.);+#7719=EDGE_CURVE('',#6598,#6749,#4049,.T.);+#7720=ORIENTED_EDGE('',*,*,#6748,.T.);+#7721=ORIENTED_EDGE('',*,*,#7722,.T.);+#7722=EDGE_CURVE('',#6743,#6894,#4049,.T.);+#7723=ORIENTED_EDGE('',*,*,#6893,.T.);+#7724=ORIENTED_EDGE('',*,*,#7725,.T.);+#7725=EDGE_CURVE('',#6888,#7039,#4049,.T.);+#7726=ORIENTED_EDGE('',*,*,#7038,.T.);+#7727=ORIENTED_EDGE('',*,*,#7728,.T.);+#7728=EDGE_CURVE('',#7033,#7184,#4049,.T.);+#7729=ORIENTED_EDGE('',*,*,#7183,.T.);+#7730=ORIENTED_EDGE('',*,*,#7731,.T.);+#7731=EDGE_CURVE('',#7178,#7329,#4049,.T.);+#7732=ORIENTED_EDGE('',*,*,#7328,.T.);+#7733=ORIENTED_EDGE('',*,*,#7704,.T.);+#7734=ORIENTED_EDGE('',*,*,#4046,.T.);+#7735=ORIENTED_EDGE('',*,*,#7589,.T.);+#7736=ORIENTED_EDGE('',*,*,#7681,.F.);+#7737=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#4050,#7565),(#4043,#7560)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,6.575),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#7738=ADVANCED_FACE('',(#7739),#7746,.T.);+#7739=FACE_BOUND('',#7740,.F.);+#7740=EDGE_LOOP('',(#7741,#4190,#7744,#7745));+#7741=ORIENTED_EDGE('',*,*,#7742,.T.);+#7742=EDGE_CURVE('',#4114,#4187,#7743,.T.);+#7743=LINE('',#4115,#2076);+#7744=ORIENTED_EDGE('',*,*,#7475,.F.);+#7745=ORIENTED_EDGE('',*,*,#4120,.F.);+#7746=CYLINDRICAL_SURFACE('',#7747,0.2);+#7747=AXIS2_PLACEMENT_3D('',#4070,#4148,#4125);+#7748=ADVANCED_FACE('',(#7749),#7756,.F.);+#7749=FACE_BOUND('',#7750,.F.);+#7750=EDGE_LOOP('',(#7751,#4185,#7754,#7755));+#7751=ORIENTED_EDGE('',*,*,#7752,.T.);+#7752=EDGE_CURVE('',#4106,#4181,#7753,.T.);+#7753=LINE('',#4107,#2076);+#7754=ORIENTED_EDGE('',*,*,#7742,.F.);+#7755=ORIENTED_EDGE('',*,*,#4113,.F.);+#7756=PLANE('',#7757);+#7757=AXIS2_PLACEMENT_3D('',#4107,#7758,#4118);+#7758=DIRECTION('',(0.986322983713,-1.128587986944E-17,-0.16482406317));+#7759=ADVANCED_FACE('',(#7760),#7767,.F.);+#7760=FACE_BOUND('',#7761,.F.);+#7761=EDGE_LOOP('',(#7762,#4179,#7765,#7766));+#7762=ORIENTED_EDGE('',*,*,#7763,.T.);+#7763=EDGE_CURVE('',#4101,#4176,#7764,.T.);+#7764=LINE('',#4102,#2076);+#7765=ORIENTED_EDGE('',*,*,#7752,.F.);+#7766=ORIENTED_EDGE('',*,*,#4105,.F.);+#7767=CYLINDRICAL_SURFACE('',#7768,1.E-01);+#7768=AXIS2_PLACEMENT_3D('',#4086,#4148,#4111);+#7769=ADVANCED_FACE('',(#7770),#7777,.F.);+#7770=FACE_BOUND('',#7771,.F.);+#7771=EDGE_LOOP('',(#7772,#4174,#7775,#7776));+#7772=ORIENTED_EDGE('',*,*,#7773,.T.);+#7773=EDGE_CURVE('',#4096,#4171,#7774,.T.);+#7774=LINE('',#4097,#2076);+#7775=ORIENTED_EDGE('',*,*,#7763,.F.);+#7776=ORIENTED_EDGE('',*,*,#4100,.F.);+#7777=PLANE('',#7778);+#7778=AXIS2_PLACEMENT_3D('',#4097,#3066,#841);+#7779=ADVANCED_FACE('',(#7780),#7787,.F.);+#7780=FACE_BOUND('',#7781,.F.);+#7781=EDGE_LOOP('',(#7782,#4169,#7785,#7786));+#7782=ORIENTED_EDGE('',*,*,#7783,.T.);+#7783=EDGE_CURVE('',#4091,#4166,#7784,.T.);+#7784=LINE('',#4092,#2076);+#7785=ORIENTED_EDGE('',*,*,#7773,.F.);+#7786=ORIENTED_EDGE('',*,*,#4095,.F.);+#7787=PLANE('',#7788);+#7788=AXIS2_PLACEMENT_3D('',#4092,#841,#13);+#7789=ADVANCED_FACE('',(#7790),#7797,.F.);+#7790=FACE_BOUND('',#7791,.F.);+#7791=EDGE_LOOP('',(#7792,#4164,#7795,#7796));+#7792=ORIENTED_EDGE('',*,*,#7793,.T.);+#7793=EDGE_CURVE('',#4082,#4159,#7794,.T.);+#7794=LINE('',#4083,#2076);+#7795=ORIENTED_EDGE('',*,*,#7783,.F.);+#7796=ORIENTED_EDGE('',*,*,#4090,.F.);+#7797=PLANE('',#7798);+#7798=AXIS2_PLACEMENT_3D('',#4083,#13,#2065);+#7799=ADVANCED_FACE('',(#7800),#7807,.T.);+#7800=FACE_BOUND('',#7801,.F.);+#7801=EDGE_LOOP('',(#7802,#4157,#7805,#7806));+#7802=ORIENTED_EDGE('',*,*,#7803,.T.);+#7803=EDGE_CURVE('',#4075,#4154,#7804,.T.);+#7804=LINE('',#4076,#2076);+#7805=ORIENTED_EDGE('',*,*,#7793,.F.);+#7806=ORIENTED_EDGE('',*,*,#4081,.F.);+#7807=CYLINDRICAL_SURFACE('',#7808,0.2);+#7808=AXIS2_PLACEMENT_3D('',#4086,#4148,#4088);+#7809=ADVANCED_FACE('',(#7810),#7815,.F.);+#7810=FACE_BOUND('',#7811,.F.);+#7811=EDGE_LOOP('',(#7812,#4152,#7813,#7814));+#7812=ORIENTED_EDGE('',*,*,#4143,.T.);+#7813=ORIENTED_EDGE('',*,*,#7803,.F.);+#7814=ORIENTED_EDGE('',*,*,#4074,.F.);+#7815=PLANE('',#7816);+#7816=AXIS2_PLACEMENT_3D('',#4067,#7817,#4079);+#7817=DIRECTION('',(-0.986322983713,1.128587986944E-17,0.16482406317));+#7818=ADVANCED_FACE('',(#7819),#7826,.T.);+#7819=FACE_BOUND('',#7820,.F.);+#7820=EDGE_LOOP('',(#7821,#4331,#7824,#7825));+#7821=ORIENTED_EDGE('',*,*,#7822,.T.);+#7822=EDGE_CURVE('',#4260,#4328,#7823,.T.);+#7823=LINE('',#4261,#2076);+#7824=ORIENTED_EDGE('',*,*,#7487,.F.);+#7825=ORIENTED_EDGE('',*,*,#4264,.F.);+#7826=CYLINDRICAL_SURFACE('',#7827,0.2);+#7827=AXIS2_PLACEMENT_3D('',#4224,#4148,#4125);+#7828=ADVANCED_FACE('',(#7829),#7836,.F.);+#7829=FACE_BOUND('',#7830,.F.);+#7830=EDGE_LOOP('',(#7831,#4326,#7834,#7835));+#7831=ORIENTED_EDGE('',*,*,#7832,.T.);+#7832=EDGE_CURVE('',#4254,#4322,#7833,.T.);+#7833=LINE('',#4255,#2076);+#7834=ORIENTED_EDGE('',*,*,#7822,.F.);+#7835=ORIENTED_EDGE('',*,*,#4259,.F.);+#7836=PLANE('',#7837);+#7837=AXIS2_PLACEMENT_3D('',#4255,#7758,#4118);+#7838=ADVANCED_FACE('',(#7839),#7846,.F.);+#7839=FACE_BOUND('',#7840,.F.);+#7840=EDGE_LOOP('',(#7841,#4320,#7844,#7845));+#7841=ORIENTED_EDGE('',*,*,#7842,.T.);+#7842=EDGE_CURVE('',#4249,#4317,#7843,.T.);+#7843=LINE('',#4250,#2076);+#7844=ORIENTED_EDGE('',*,*,#7832,.F.);+#7845=ORIENTED_EDGE('',*,*,#4253,.F.);+#7846=CYLINDRICAL_SURFACE('',#7847,1.E-01);+#7847=AXIS2_PLACEMENT_3D('',#4236,#4148,#4111);+#7848=ADVANCED_FACE('',(#7849),#7856,.F.);+#7849=FACE_BOUND('',#7850,.F.);+#7850=EDGE_LOOP('',(#7851,#4315,#7854,#7855));+#7851=ORIENTED_EDGE('',*,*,#7852,.T.);+#7852=EDGE_CURVE('',#4244,#4312,#7853,.T.);+#7853=LINE('',#4245,#2076);+#7854=ORIENTED_EDGE('',*,*,#7842,.F.);+#7855=ORIENTED_EDGE('',*,*,#4248,.F.);+#7856=PLANE('',#7857);+#7857=AXIS2_PLACEMENT_3D('',#4245,#3066,#841);+#7858=ADVANCED_FACE('',(#7859),#7866,.F.);+#7859=FACE_BOUND('',#7860,.F.);+#7860=EDGE_LOOP('',(#7861,#4310,#7864,#7865));+#7861=ORIENTED_EDGE('',*,*,#7862,.T.);+#7862=EDGE_CURVE('',#4239,#4307,#7863,.T.);+#7863=LINE('',#4240,#2076);+#7864=ORIENTED_EDGE('',*,*,#7852,.F.);+#7865=ORIENTED_EDGE('',*,*,#4243,.F.);+#7866=PLANE('',#7867);+#7867=AXIS2_PLACEMENT_3D('',#4240,#841,#13);+#7868=ADVANCED_FACE('',(#7869),#7876,.F.);+#7869=FACE_BOUND('',#7870,.F.);+#7870=EDGE_LOOP('',(#7871,#4305,#7874,#7875));+#7871=ORIENTED_EDGE('',*,*,#7872,.T.);+#7872=EDGE_CURVE('',#4232,#4300,#7873,.T.);+#7873=LINE('',#4233,#2076);+#7874=ORIENTED_EDGE('',*,*,#7862,.F.);+#7875=ORIENTED_EDGE('',*,*,#4238,.F.);+#7876=PLANE('',#7877);+#7877=AXIS2_PLACEMENT_3D('',#4233,#13,#2065);+#7878=ADVANCED_FACE('',(#7879),#7886,.T.);+#7879=FACE_BOUND('',#7880,.F.);+#7880=EDGE_LOOP('',(#7881,#4298,#7884,#7885));+#7881=ORIENTED_EDGE('',*,*,#7882,.T.);+#7882=EDGE_CURVE('',#4227,#4295,#7883,.T.);+#7883=LINE('',#4228,#2076);+#7884=ORIENTED_EDGE('',*,*,#7872,.F.);+#7885=ORIENTED_EDGE('',*,*,#4231,.F.);+#7886=CYLINDRICAL_SURFACE('',#7887,0.2);+#7887=AXIS2_PLACEMENT_3D('',#4236,#4148,#4088);+#7888=ADVANCED_FACE('',(#7889),#7894,.F.);+#7889=FACE_BOUND('',#7890,.F.);+#7890=EDGE_LOOP('',(#7891,#4293,#7892,#7893));+#7891=ORIENTED_EDGE('',*,*,#4285,.T.);+#7892=ORIENTED_EDGE('',*,*,#7882,.F.);+#7893=ORIENTED_EDGE('',*,*,#4226,.F.);+#7894=PLANE('',#7895);+#7895=AXIS2_PLACEMENT_3D('',#4221,#7817,#4079);+#7896=ADVANCED_FACE('',(#7897),#7904,.T.);+#7897=FACE_BOUND('',#7898,.F.);+#7898=EDGE_LOOP('',(#7899,#4472,#7902,#7903));+#7899=ORIENTED_EDGE('',*,*,#7900,.T.);+#7900=EDGE_CURVE('',#4401,#4469,#7901,.T.);+#7901=LINE('',#4402,#2076);+#7902=ORIENTED_EDGE('',*,*,#7499,.F.);+#7903=ORIENTED_EDGE('',*,*,#4405,.F.);+#7904=CYLINDRICAL_SURFACE('',#7905,0.2);+#7905=AXIS2_PLACEMENT_3D('',#4365,#4148,#4125);+#7906=ADVANCED_FACE('',(#7907),#7914,.F.);+#7907=FACE_BOUND('',#7908,.F.);+#7908=EDGE_LOOP('',(#7909,#4467,#7912,#7913));+#7909=ORIENTED_EDGE('',*,*,#7910,.T.);+#7910=EDGE_CURVE('',#4395,#4463,#7911,.T.);+#7911=LINE('',#4396,#2076);+#7912=ORIENTED_EDGE('',*,*,#7900,.F.);+#7913=ORIENTED_EDGE('',*,*,#4400,.F.);+#7914=PLANE('',#7915);+#7915=AXIS2_PLACEMENT_3D('',#4396,#7758,#4118);+#7916=ADVANCED_FACE('',(#7917),#7924,.F.);+#7917=FACE_BOUND('',#7918,.F.);+#7918=EDGE_LOOP('',(#7919,#4461,#7922,#7923));+#7919=ORIENTED_EDGE('',*,*,#7920,.T.);+#7920=EDGE_CURVE('',#4390,#4458,#7921,.T.);+#7921=LINE('',#4391,#2076);+#7922=ORIENTED_EDGE('',*,*,#7910,.F.);+#7923=ORIENTED_EDGE('',*,*,#4394,.F.);+#7924=CYLINDRICAL_SURFACE('',#7925,1.E-01);+#7925=AXIS2_PLACEMENT_3D('',#4377,#4148,#4111);+#7926=ADVANCED_FACE('',(#7927),#7934,.F.);+#7927=FACE_BOUND('',#7928,.F.);+#7928=EDGE_LOOP('',(#7929,#4456,#7932,#7933));+#7929=ORIENTED_EDGE('',*,*,#7930,.T.);+#7930=EDGE_CURVE('',#4385,#4453,#7931,.T.);+#7931=LINE('',#4386,#2076);+#7932=ORIENTED_EDGE('',*,*,#7920,.F.);+#7933=ORIENTED_EDGE('',*,*,#4389,.F.);+#7934=PLANE('',#7935);+#7935=AXIS2_PLACEMENT_3D('',#4386,#3066,#841);+#7936=ADVANCED_FACE('',(#7937),#7944,.F.);+#7937=FACE_BOUND('',#7938,.F.);+#7938=EDGE_LOOP('',(#7939,#4451,#7942,#7943));+#7939=ORIENTED_EDGE('',*,*,#7940,.T.);+#7940=EDGE_CURVE('',#4380,#4448,#7941,.T.);+#7941=LINE('',#4381,#2076);+#7942=ORIENTED_EDGE('',*,*,#7930,.F.);+#7943=ORIENTED_EDGE('',*,*,#4384,.F.);+#7944=PLANE('',#7945);+#7945=AXIS2_PLACEMENT_3D('',#4381,#841,#13);+#7946=ADVANCED_FACE('',(#7947),#7954,.F.);+#7947=FACE_BOUND('',#7948,.F.);+#7948=EDGE_LOOP('',(#7949,#4446,#7952,#7953));+#7949=ORIENTED_EDGE('',*,*,#7950,.T.);+#7950=EDGE_CURVE('',#4373,#4441,#7951,.T.);+#7951=LINE('',#4374,#2076);+#7952=ORIENTED_EDGE('',*,*,#7940,.F.);+#7953=ORIENTED_EDGE('',*,*,#4379,.F.);+#7954=PLANE('',#7955);+#7955=AXIS2_PLACEMENT_3D('',#4374,#13,#2065);+#7956=ADVANCED_FACE('',(#7957),#7964,.T.);+#7957=FACE_BOUND('',#7958,.F.);+#7958=EDGE_LOOP('',(#7959,#4439,#7962,#7963));+#7959=ORIENTED_EDGE('',*,*,#7960,.T.);+#7960=EDGE_CURVE('',#4368,#4436,#7961,.T.);+#7961=LINE('',#4369,#2076);+#7962=ORIENTED_EDGE('',*,*,#7950,.F.);+#7963=ORIENTED_EDGE('',*,*,#4372,.F.);+#7964=CYLINDRICAL_SURFACE('',#7965,0.2);+#7965=AXIS2_PLACEMENT_3D('',#4377,#4148,#4088);+#7966=ADVANCED_FACE('',(#7967),#7972,.F.);+#7967=FACE_BOUND('',#7968,.F.);+#7968=EDGE_LOOP('',(#7969,#4434,#7970,#7971));+#7969=ORIENTED_EDGE('',*,*,#4426,.T.);+#7970=ORIENTED_EDGE('',*,*,#7960,.F.);+#7971=ORIENTED_EDGE('',*,*,#4367,.F.);+#7972=PLANE('',#7973);+#7973=AXIS2_PLACEMENT_3D('',#4362,#7817,#4079);+#7974=ADVANCED_FACE('',(#7975),#7982,.T.);+#7975=FACE_BOUND('',#7976,.F.);+#7976=EDGE_LOOP('',(#7977,#4613,#7980,#7981));+#7977=ORIENTED_EDGE('',*,*,#7978,.T.);+#7978=EDGE_CURVE('',#4542,#4610,#7979,.T.);+#7979=LINE('',#4543,#2076);+#7980=ORIENTED_EDGE('',*,*,#7511,.F.);+#7981=ORIENTED_EDGE('',*,*,#4546,.F.);+#7982=CYLINDRICAL_SURFACE('',#7983,0.2);+#7983=AXIS2_PLACEMENT_3D('',#4506,#4148,#4125);+#7984=ADVANCED_FACE('',(#7985),#7992,.F.);+#7985=FACE_BOUND('',#7986,.F.);+#7986=EDGE_LOOP('',(#7987,#4608,#7990,#7991));+#7987=ORIENTED_EDGE('',*,*,#7988,.T.);+#7988=EDGE_CURVE('',#4536,#4604,#7989,.T.);+#7989=LINE('',#4537,#2076);+#7990=ORIENTED_EDGE('',*,*,#7978,.F.);+#7991=ORIENTED_EDGE('',*,*,#4541,.F.);+#7992=PLANE('',#7993);+#7993=AXIS2_PLACEMENT_3D('',#4537,#7758,#4118);+#7994=ADVANCED_FACE('',(#7995),#8002,.F.);+#7995=FACE_BOUND('',#7996,.F.);+#7996=EDGE_LOOP('',(#7997,#4602,#8000,#8001));+#7997=ORIENTED_EDGE('',*,*,#7998,.T.);+#7998=EDGE_CURVE('',#4531,#4599,#7999,.T.);+#7999=LINE('',#4532,#2076);+#8000=ORIENTED_EDGE('',*,*,#7988,.F.);+#8001=ORIENTED_EDGE('',*,*,#4535,.F.);+#8002=CYLINDRICAL_SURFACE('',#8003,1.E-01);+#8003=AXIS2_PLACEMENT_3D('',#4518,#4148,#4111);+#8004=ADVANCED_FACE('',(#8005),#8012,.F.);+#8005=FACE_BOUND('',#8006,.F.);+#8006=EDGE_LOOP('',(#8007,#4597,#8010,#8011));+#8007=ORIENTED_EDGE('',*,*,#8008,.T.);+#8008=EDGE_CURVE('',#4526,#4594,#8009,.T.);+#8009=LINE('',#4527,#2076);+#8010=ORIENTED_EDGE('',*,*,#7998,.F.);+#8011=ORIENTED_EDGE('',*,*,#4530,.F.);+#8012=PLANE('',#8013);+#8013=AXIS2_PLACEMENT_3D('',#4527,#3066,#841);+#8014=ADVANCED_FACE('',(#8015),#8022,.F.);+#8015=FACE_BOUND('',#8016,.F.);+#8016=EDGE_LOOP('',(#8017,#4592,#8020,#8021));+#8017=ORIENTED_EDGE('',*,*,#8018,.T.);+#8018=EDGE_CURVE('',#4521,#4589,#8019,.T.);+#8019=LINE('',#4522,#2076);+#8020=ORIENTED_EDGE('',*,*,#8008,.F.);+#8021=ORIENTED_EDGE('',*,*,#4525,.F.);+#8022=PLANE('',#8023);+#8023=AXIS2_PLACEMENT_3D('',#4522,#841,#13);+#8024=ADVANCED_FACE('',(#8025),#8032,.F.);+#8025=FACE_BOUND('',#8026,.F.);+#8026=EDGE_LOOP('',(#8027,#4587,#8030,#8031));+#8027=ORIENTED_EDGE('',*,*,#8028,.T.);+#8028=EDGE_CURVE('',#4514,#4582,#8029,.T.);+#8029=LINE('',#4515,#2076);+#8030=ORIENTED_EDGE('',*,*,#8018,.F.);+#8031=ORIENTED_EDGE('',*,*,#4520,.F.);+#8032=PLANE('',#8033);+#8033=AXIS2_PLACEMENT_3D('',#4515,#13,#2065);+#8034=ADVANCED_FACE('',(#8035),#8042,.T.);+#8035=FACE_BOUND('',#8036,.F.);+#8036=EDGE_LOOP('',(#8037,#4580,#8040,#8041));+#8037=ORIENTED_EDGE('',*,*,#8038,.T.);+#8038=EDGE_CURVE('',#4509,#4577,#8039,.T.);+#8039=LINE('',#4510,#2076);+#8040=ORIENTED_EDGE('',*,*,#8028,.F.);+#8041=ORIENTED_EDGE('',*,*,#4513,.F.);+#8042=CYLINDRICAL_SURFACE('',#8043,0.2);+#8043=AXIS2_PLACEMENT_3D('',#4518,#4148,#4088);+#8044=ADVANCED_FACE('',(#8045),#8050,.F.);+#8045=FACE_BOUND('',#8046,.F.);+#8046=EDGE_LOOP('',(#8047,#4575,#8048,#8049));+#8047=ORIENTED_EDGE('',*,*,#4567,.T.);+#8048=ORIENTED_EDGE('',*,*,#8038,.F.);+#8049=ORIENTED_EDGE('',*,*,#4508,.F.);+#8050=PLANE('',#8051);+#8051=AXIS2_PLACEMENT_3D('',#4503,#7817,#4079);+#8052=ADVANCED_FACE('',(#8053),#8060,.T.);+#8053=FACE_BOUND('',#8054,.F.);+#8054=EDGE_LOOP('',(#8055,#4754,#8058,#8059));+#8055=ORIENTED_EDGE('',*,*,#8056,.T.);+#8056=EDGE_CURVE('',#4683,#4751,#8057,.T.);+#8057=LINE('',#4684,#2076);+#8058=ORIENTED_EDGE('',*,*,#7523,.F.);+#8059=ORIENTED_EDGE('',*,*,#4687,.F.);+#8060=CYLINDRICAL_SURFACE('',#8061,0.2);+#8061=AXIS2_PLACEMENT_3D('',#4647,#4148,#4125);+#8062=ADVANCED_FACE('',(#8063),#8070,.F.);+#8063=FACE_BOUND('',#8064,.F.);+#8064=EDGE_LOOP('',(#8065,#4749,#8068,#8069));+#8065=ORIENTED_EDGE('',*,*,#8066,.T.);+#8066=EDGE_CURVE('',#4677,#4745,#8067,.T.);+#8067=LINE('',#4678,#2076);+#8068=ORIENTED_EDGE('',*,*,#8056,.F.);+#8069=ORIENTED_EDGE('',*,*,#4682,.F.);+#8070=PLANE('',#8071);+#8071=AXIS2_PLACEMENT_3D('',#4678,#7758,#4118);+#8072=ADVANCED_FACE('',(#8073),#8080,.F.);+#8073=FACE_BOUND('',#8074,.F.);+#8074=EDGE_LOOP('',(#8075,#4743,#8078,#8079));+#8075=ORIENTED_EDGE('',*,*,#8076,.T.);+#8076=EDGE_CURVE('',#4672,#4740,#8077,.T.);+#8077=LINE('',#4673,#2076);+#8078=ORIENTED_EDGE('',*,*,#8066,.F.);+#8079=ORIENTED_EDGE('',*,*,#4676,.F.);+#8080=CYLINDRICAL_SURFACE('',#8081,1.E-01);+#8081=AXIS2_PLACEMENT_3D('',#4659,#4148,#4111);+#8082=ADVANCED_FACE('',(#8083),#8090,.F.);+#8083=FACE_BOUND('',#8084,.F.);+#8084=EDGE_LOOP('',(#8085,#4738,#8088,#8089));+#8085=ORIENTED_EDGE('',*,*,#8086,.T.);+#8086=EDGE_CURVE('',#4667,#4735,#8087,.T.);+#8087=LINE('',#4668,#2076);+#8088=ORIENTED_EDGE('',*,*,#8076,.F.);+#8089=ORIENTED_EDGE('',*,*,#4671,.F.);+#8090=PLANE('',#8091);+#8091=AXIS2_PLACEMENT_3D('',#4668,#3066,#841);+#8092=ADVANCED_FACE('',(#8093),#8100,.F.);+#8093=FACE_BOUND('',#8094,.F.);+#8094=EDGE_LOOP('',(#8095,#4733,#8098,#8099));+#8095=ORIENTED_EDGE('',*,*,#8096,.T.);+#8096=EDGE_CURVE('',#4662,#4730,#8097,.T.);+#8097=LINE('',#4663,#2076);+#8098=ORIENTED_EDGE('',*,*,#8086,.F.);+#8099=ORIENTED_EDGE('',*,*,#4666,.F.);+#8100=PLANE('',#8101);+#8101=AXIS2_PLACEMENT_3D('',#4663,#841,#13);+#8102=ADVANCED_FACE('',(#8103),#8110,.F.);+#8103=FACE_BOUND('',#8104,.F.);+#8104=EDGE_LOOP('',(#8105,#4728,#8108,#8109));+#8105=ORIENTED_EDGE('',*,*,#8106,.T.);+#8106=EDGE_CURVE('',#4655,#4723,#8107,.T.);+#8107=LINE('',#4656,#2076);+#8108=ORIENTED_EDGE('',*,*,#8096,.F.);+#8109=ORIENTED_EDGE('',*,*,#4661,.F.);+#8110=PLANE('',#8111);+#8111=AXIS2_PLACEMENT_3D('',#4656,#13,#2065);+#8112=ADVANCED_FACE('',(#8113),#8120,.T.);+#8113=FACE_BOUND('',#8114,.F.);+#8114=EDGE_LOOP('',(#8115,#4721,#8118,#8119));+#8115=ORIENTED_EDGE('',*,*,#8116,.T.);+#8116=EDGE_CURVE('',#4650,#4718,#8117,.T.);+#8117=LINE('',#4651,#2076);+#8118=ORIENTED_EDGE('',*,*,#8106,.F.);+#8119=ORIENTED_EDGE('',*,*,#4654,.F.);+#8120=CYLINDRICAL_SURFACE('',#8121,0.2);+#8121=AXIS2_PLACEMENT_3D('',#4659,#4148,#4088);+#8122=ADVANCED_FACE('',(#8123),#8128,.F.);+#8123=FACE_BOUND('',#8124,.F.);+#8124=EDGE_LOOP('',(#8125,#4716,#8126,#8127));+#8125=ORIENTED_EDGE('',*,*,#4708,.T.);+#8126=ORIENTED_EDGE('',*,*,#8116,.F.);+#8127=ORIENTED_EDGE('',*,*,#4649,.F.);+#8128=PLANE('',#8129);+#8129=AXIS2_PLACEMENT_3D('',#4644,#7817,#4079);+#8130=ADVANCED_FACE('',(#8131),#8138,.T.);+#8131=FACE_BOUND('',#8132,.F.);+#8132=EDGE_LOOP('',(#8133,#4895,#8136,#8137));+#8133=ORIENTED_EDGE('',*,*,#8134,.T.);+#8134=EDGE_CURVE('',#4824,#4892,#8135,.T.);+#8135=LINE('',#4825,#2076);+#8136=ORIENTED_EDGE('',*,*,#7535,.F.);+#8137=ORIENTED_EDGE('',*,*,#4828,.F.);+#8138=CYLINDRICAL_SURFACE('',#8139,0.2);+#8139=AXIS2_PLACEMENT_3D('',#4788,#4148,#4125);+#8140=ADVANCED_FACE('',(#8141),#8148,.F.);+#8141=FACE_BOUND('',#8142,.F.);+#8142=EDGE_LOOP('',(#8143,#4890,#8146,#8147));+#8143=ORIENTED_EDGE('',*,*,#8144,.T.);+#8144=EDGE_CURVE('',#4818,#4886,#8145,.T.);+#8145=LINE('',#4819,#2076);+#8146=ORIENTED_EDGE('',*,*,#8134,.F.);+#8147=ORIENTED_EDGE('',*,*,#4823,.F.);+#8148=PLANE('',#8149);+#8149=AXIS2_PLACEMENT_3D('',#4819,#7758,#4118);+#8150=ADVANCED_FACE('',(#8151),#8158,.F.);+#8151=FACE_BOUND('',#8152,.F.);+#8152=EDGE_LOOP('',(#8153,#4884,#8156,#8157));+#8153=ORIENTED_EDGE('',*,*,#8154,.T.);+#8154=EDGE_CURVE('',#4813,#4881,#8155,.T.);+#8155=LINE('',#4814,#2076);+#8156=ORIENTED_EDGE('',*,*,#8144,.F.);+#8157=ORIENTED_EDGE('',*,*,#4817,.F.);+#8158=CYLINDRICAL_SURFACE('',#8159,1.E-01);+#8159=AXIS2_PLACEMENT_3D('',#4800,#4148,#4111);+#8160=ADVANCED_FACE('',(#8161),#8168,.F.);+#8161=FACE_BOUND('',#8162,.F.);+#8162=EDGE_LOOP('',(#8163,#4879,#8166,#8167));+#8163=ORIENTED_EDGE('',*,*,#8164,.T.);+#8164=EDGE_CURVE('',#4808,#4876,#8165,.T.);+#8165=LINE('',#4809,#2076);+#8166=ORIENTED_EDGE('',*,*,#8154,.F.);+#8167=ORIENTED_EDGE('',*,*,#4812,.F.);+#8168=PLANE('',#8169);+#8169=AXIS2_PLACEMENT_3D('',#4809,#3066,#841);+#8170=ADVANCED_FACE('',(#8171),#8178,.F.);+#8171=FACE_BOUND('',#8172,.F.);+#8172=EDGE_LOOP('',(#8173,#4874,#8176,#8177));+#8173=ORIENTED_EDGE('',*,*,#8174,.T.);+#8174=EDGE_CURVE('',#4803,#4871,#8175,.T.);+#8175=LINE('',#4804,#2076);+#8176=ORIENTED_EDGE('',*,*,#8164,.F.);+#8177=ORIENTED_EDGE('',*,*,#4807,.F.);+#8178=PLANE('',#8179);+#8179=AXIS2_PLACEMENT_3D('',#4804,#841,#13);+#8180=ADVANCED_FACE('',(#8181),#8188,.F.);+#8181=FACE_BOUND('',#8182,.F.);+#8182=EDGE_LOOP('',(#8183,#4869,#8186,#8187));+#8183=ORIENTED_EDGE('',*,*,#8184,.T.);+#8184=EDGE_CURVE('',#4796,#4864,#8185,.T.);+#8185=LINE('',#4797,#2076);+#8186=ORIENTED_EDGE('',*,*,#8174,.F.);+#8187=ORIENTED_EDGE('',*,*,#4802,.F.);+#8188=PLANE('',#8189);+#8189=AXIS2_PLACEMENT_3D('',#4797,#13,#2065);+#8190=ADVANCED_FACE('',(#8191),#8198,.T.);+#8191=FACE_BOUND('',#8192,.F.);+#8192=EDGE_LOOP('',(#8193,#4862,#8196,#8197));+#8193=ORIENTED_EDGE('',*,*,#8194,.T.);+#8194=EDGE_CURVE('',#4791,#4859,#8195,.T.);+#8195=LINE('',#4792,#2076);+#8196=ORIENTED_EDGE('',*,*,#8184,.F.);+#8197=ORIENTED_EDGE('',*,*,#4795,.F.);+#8198=CYLINDRICAL_SURFACE('',#8199,0.2);+#8199=AXIS2_PLACEMENT_3D('',#4800,#4148,#4088);+#8200=ADVANCED_FACE('',(#8201),#8206,.F.);+#8201=FACE_BOUND('',#8202,.F.);+#8202=EDGE_LOOP('',(#8203,#4857,#8204,#8205));+#8203=ORIENTED_EDGE('',*,*,#4849,.T.);+#8204=ORIENTED_EDGE('',*,*,#8194,.F.);+#8205=ORIENTED_EDGE('',*,*,#4790,.F.);+#8206=PLANE('',#8207);+#8207=AXIS2_PLACEMENT_3D('',#4785,#7817,#4079);+#8208=ADVANCED_FACE('',(#8209),#8216,.T.);+#8209=FACE_BOUND('',#8210,.F.);+#8210=EDGE_LOOP('',(#8211,#5036,#8214,#8215));+#8211=ORIENTED_EDGE('',*,*,#8212,.T.);+#8212=EDGE_CURVE('',#4965,#5033,#8213,.T.);+#8213=LINE('',#4966,#2076);+#8214=ORIENTED_EDGE('',*,*,#7547,.F.);+#8215=ORIENTED_EDGE('',*,*,#4969,.F.);+#8216=CYLINDRICAL_SURFACE('',#8217,0.2);+#8217=AXIS2_PLACEMENT_3D('',#4929,#4148,#4125);+#8218=ADVANCED_FACE('',(#8219),#8226,.F.);+#8219=FACE_BOUND('',#8220,.F.);+#8220=EDGE_LOOP('',(#8221,#5031,#8224,#8225));+#8221=ORIENTED_EDGE('',*,*,#8222,.T.);+#8222=EDGE_CURVE('',#4959,#5027,#8223,.T.);+#8223=LINE('',#4960,#2076);+#8224=ORIENTED_EDGE('',*,*,#8212,.F.);+#8225=ORIENTED_EDGE('',*,*,#4964,.F.);+#8226=PLANE('',#8227);+#8227=AXIS2_PLACEMENT_3D('',#4960,#7758,#4118);+#8228=ADVANCED_FACE('',(#8229),#8236,.F.);+#8229=FACE_BOUND('',#8230,.F.);+#8230=EDGE_LOOP('',(#8231,#5025,#8234,#8235));+#8231=ORIENTED_EDGE('',*,*,#8232,.T.);+#8232=EDGE_CURVE('',#4954,#5022,#8233,.T.);+#8233=LINE('',#4955,#2076);+#8234=ORIENTED_EDGE('',*,*,#8222,.F.);+#8235=ORIENTED_EDGE('',*,*,#4958,.F.);+#8236=CYLINDRICAL_SURFACE('',#8237,1.E-01);+#8237=AXIS2_PLACEMENT_3D('',#4941,#4148,#4111);+#8238=ADVANCED_FACE('',(#8239),#8246,.F.);+#8239=FACE_BOUND('',#8240,.F.);+#8240=EDGE_LOOP('',(#8241,#5020,#8244,#8245));+#8241=ORIENTED_EDGE('',*,*,#8242,.T.);+#8242=EDGE_CURVE('',#4949,#5017,#8243,.T.);+#8243=LINE('',#4950,#2076);+#8244=ORIENTED_EDGE('',*,*,#8232,.F.);+#8245=ORIENTED_EDGE('',*,*,#4953,.F.);+#8246=PLANE('',#8247);+#8247=AXIS2_PLACEMENT_3D('',#4950,#3066,#841);+#8248=ADVANCED_FACE('',(#8249),#8256,.F.);+#8249=FACE_BOUND('',#8250,.F.);+#8250=EDGE_LOOP('',(#8251,#5015,#8254,#8255));+#8251=ORIENTED_EDGE('',*,*,#8252,.T.);+#8252=EDGE_CURVE('',#4944,#5012,#8253,.T.);+#8253=LINE('',#4945,#2076);+#8254=ORIENTED_EDGE('',*,*,#8242,.F.);+#8255=ORIENTED_EDGE('',*,*,#4948,.F.);+#8256=PLANE('',#8257);+#8257=AXIS2_PLACEMENT_3D('',#4945,#841,#13);+#8258=ADVANCED_FACE('',(#8259),#8266,.F.);+#8259=FACE_BOUND('',#8260,.F.);+#8260=EDGE_LOOP('',(#8261,#5010,#8264,#8265));+#8261=ORIENTED_EDGE('',*,*,#8262,.T.);+#8262=EDGE_CURVE('',#4937,#5005,#8263,.T.);+#8263=LINE('',#4938,#2076);+#8264=ORIENTED_EDGE('',*,*,#8252,.F.);+#8265=ORIENTED_EDGE('',*,*,#4943,.F.);+#8266=PLANE('',#8267);+#8267=AXIS2_PLACEMENT_3D('',#4938,#13,#2065);+#8268=ADVANCED_FACE('',(#8269),#8276,.T.);+#8269=FACE_BOUND('',#8270,.F.);+#8270=EDGE_LOOP('',(#8271,#5003,#8274,#8275));+#8271=ORIENTED_EDGE('',*,*,#8272,.T.);+#8272=EDGE_CURVE('',#4932,#5000,#8273,.T.);+#8273=LINE('',#4933,#2076);+#8274=ORIENTED_EDGE('',*,*,#8262,.F.);+#8275=ORIENTED_EDGE('',*,*,#4936,.F.);+#8276=CYLINDRICAL_SURFACE('',#8277,0.2);+#8277=AXIS2_PLACEMENT_3D('',#4941,#4148,#4088);+#8278=ADVANCED_FACE('',(#8279),#8284,.F.);+#8279=FACE_BOUND('',#8280,.F.);+#8280=EDGE_LOOP('',(#8281,#4998,#8282,#8283));+#8281=ORIENTED_EDGE('',*,*,#4990,.T.);+#8282=ORIENTED_EDGE('',*,*,#8272,.F.);+#8283=ORIENTED_EDGE('',*,*,#4931,.F.);+#8284=PLANE('',#8285);+#8285=AXIS2_PLACEMENT_3D('',#4926,#7817,#4079);+#8286=ADVANCED_FACE('',(#8287),#8294,.F.);+#8287=FACE_BOUND('',#8288,.F.);+#8288=EDGE_LOOP('',(#8289,#5167,#8292,#8293));+#8289=ORIENTED_EDGE('',*,*,#8290,.T.);+#8290=EDGE_CURVE('',#5097,#5163,#8291,.T.);+#8291=LINE('',#5098,#2076);+#8292=ORIENTED_EDGE('',*,*,#7464,.F.);+#8293=ORIENTED_EDGE('',*,*,#5102,.F.);+#8294=PLANE('',#8295);+#8295=AXIS2_PLACEMENT_3D('',#5098,#7758,#4118);+#8296=ADVANCED_FACE('',(#8297),#8304,.F.);+#8297=FACE_BOUND('',#8298,.F.);+#8298=EDGE_LOOP('',(#8299,#5161,#8302,#8303));+#8299=ORIENTED_EDGE('',*,*,#8300,.T.);+#8300=EDGE_CURVE('',#5092,#5158,#8301,.T.);+#8301=LINE('',#5093,#2076);+#8302=ORIENTED_EDGE('',*,*,#8290,.F.);+#8303=ORIENTED_EDGE('',*,*,#5096,.F.);+#8304=CYLINDRICAL_SURFACE('',#8305,1.E-01);+#8305=AXIS2_PLACEMENT_3D('',#5079,#4148,#4111);+#8306=ADVANCED_FACE('',(#8307),#8314,.F.);+#8307=FACE_BOUND('',#8308,.F.);+#8308=EDGE_LOOP('',(#8309,#5156,#8312,#8313));+#8309=ORIENTED_EDGE('',*,*,#8310,.T.);+#8310=EDGE_CURVE('',#5087,#5153,#8311,.T.);+#8311=LINE('',#5088,#2076);+#8312=ORIENTED_EDGE('',*,*,#8300,.F.);+#8313=ORIENTED_EDGE('',*,*,#5091,.F.);+#8314=PLANE('',#8315);+#8315=AXIS2_PLACEMENT_3D('',#5088,#3066,#841);+#8316=ADVANCED_FACE('',(#8317),#8324,.F.);+#8317=FACE_BOUND('',#8318,.F.);+#8318=EDGE_LOOP('',(#8319,#5151,#8322,#8323));+#8319=ORIENTED_EDGE('',*,*,#8320,.T.);+#8320=EDGE_CURVE('',#5082,#5148,#8321,.T.);+#8321=LINE('',#5083,#2076);+#8322=ORIENTED_EDGE('',*,*,#8310,.F.);+#8323=ORIENTED_EDGE('',*,*,#5086,.F.);+#8324=PLANE('',#8325);+#8325=AXIS2_PLACEMENT_3D('',#5083,#841,#13);+#8326=ADVANCED_FACE('',(#8327),#8334,.F.);+#8327=FACE_BOUND('',#8328,.F.);+#8328=EDGE_LOOP('',(#8329,#5146,#8332,#8333));+#8329=ORIENTED_EDGE('',*,*,#8330,.T.);+#8330=EDGE_CURVE('',#5075,#5141,#8331,.T.);+#8331=LINE('',#5076,#2076);+#8332=ORIENTED_EDGE('',*,*,#8320,.F.);+#8333=ORIENTED_EDGE('',*,*,#5081,.F.);+#8334=PLANE('',#8335);+#8335=AXIS2_PLACEMENT_3D('',#5076,#13,#2065);+#8336=ADVANCED_FACE('',(#8337),#8344,.T.);+#8337=FACE_BOUND('',#8338,.F.);+#8338=EDGE_LOOP('',(#8339,#5139,#8342,#8343));+#8339=ORIENTED_EDGE('',*,*,#8340,.T.);+#8340=EDGE_CURVE('',#5070,#5136,#8341,.T.);+#8341=LINE('',#5071,#2076);+#8342=ORIENTED_EDGE('',*,*,#8330,.F.);+#8343=ORIENTED_EDGE('',*,*,#5074,.F.);+#8344=CYLINDRICAL_SURFACE('',#8345,0.2);+#8345=AXIS2_PLACEMENT_3D('',#5079,#4148,#4088);+#8346=ADVANCED_FACE('',(#8347),#8352,.F.);+#8347=FACE_BOUND('',#8348,.F.);+#8348=EDGE_LOOP('',(#8349,#5134,#8350,#8351));+#8349=ORIENTED_EDGE('',*,*,#5126,.T.);+#8350=ORIENTED_EDGE('',*,*,#8340,.F.);+#8351=ORIENTED_EDGE('',*,*,#5069,.F.);+#8352=PLANE('',#8353);+#8353=AXIS2_PLACEMENT_3D('',#5064,#7817,#4079);+#8354=ADVANCED_FACE('',(#8355),#8362,.F.);+#8355=FACE_BOUND('',#8356,.F.);+#8356=EDGE_LOOP('',(#8357,#5297,#8360,#8361));+#8357=ORIENTED_EDGE('',*,*,#8358,.T.);+#8358=EDGE_CURVE('',#5224,#5293,#8359,.T.);+#8359=LINE('',#5225,#122);+#8360=ORIENTED_EDGE('',*,*,#7689,.F.);+#8361=ORIENTED_EDGE('',*,*,#5230,.F.);+#8362=PLANE('',#8363);+#8363=AXIS2_PLACEMENT_3D('',#5225,#8364,#5235);+#8364=DIRECTION('',(-0.986322983713,-1.095038486235E-16,-0.16482406317));+#8365=ADVANCED_FACE('',(#8366),#8373,.F.);+#8366=FACE_BOUND('',#8367,.F.);+#8367=EDGE_LOOP('',(#8368,#5291,#8371,#8372));+#8368=ORIENTED_EDGE('',*,*,#8369,.T.);+#8369=EDGE_CURVE('',#5219,#5288,#8370,.T.);+#8370=LINE('',#5220,#122);+#8371=ORIENTED_EDGE('',*,*,#8358,.F.);+#8372=ORIENTED_EDGE('',*,*,#5223,.F.);+#8373=CYLINDRICAL_SURFACE('',#5227,1.E-01);+#8374=ADVANCED_FACE('',(#8375),#8382,.F.);+#8375=FACE_BOUND('',#8376,.F.);+#8376=EDGE_LOOP('',(#8377,#5286,#8380,#8381));+#8377=ORIENTED_EDGE('',*,*,#8378,.T.);+#8378=EDGE_CURVE('',#5214,#5283,#8379,.T.);+#8379=LINE('',#5215,#122);+#8380=ORIENTED_EDGE('',*,*,#8369,.F.);+#8381=ORIENTED_EDGE('',*,*,#5218,.F.);+#8382=PLANE('',#8383);+#8383=AXIS2_PLACEMENT_3D('',#5215,#3066,#137);+#8384=ADVANCED_FACE('',(#8385),#8392,.F.);+#8385=FACE_BOUND('',#8386,.F.);+#8386=EDGE_LOOP('',(#8387,#5281,#8390,#8391));+#8387=ORIENTED_EDGE('',*,*,#8388,.T.);+#8388=EDGE_CURVE('',#5209,#5278,#8389,.T.);+#8389=LINE('',#5210,#122);+#8390=ORIENTED_EDGE('',*,*,#8378,.F.);+#8391=ORIENTED_EDGE('',*,*,#5213,.F.);+#8392=PLANE('',#8393);+#8393=AXIS2_PLACEMENT_3D('',#5210,#137,#13);+#8394=ADVANCED_FACE('',(#8395),#8402,.F.);+#8395=FACE_BOUND('',#8396,.F.);+#8396=EDGE_LOOP('',(#8397,#5276,#8400,#8401));+#8397=ORIENTED_EDGE('',*,*,#8398,.T.);+#8398=EDGE_CURVE('',#5201,#5271,#8399,.T.);+#8399=LINE('',#5202,#122);+#8400=ORIENTED_EDGE('',*,*,#8388,.F.);+#8401=ORIENTED_EDGE('',*,*,#5208,.F.);+#8402=PLANE('',#8403);+#8403=AXIS2_PLACEMENT_3D('',#5202,#13,#28);+#8404=ADVANCED_FACE('',(#8405),#8412,.T.);+#8405=FACE_BOUND('',#8406,.F.);+#8406=EDGE_LOOP('',(#8407,#5269,#8410,#8411));+#8407=ORIENTED_EDGE('',*,*,#8408,.T.);+#8408=EDGE_CURVE('',#5194,#5266,#8409,.T.);+#8409=LINE('',#5195,#122);+#8410=ORIENTED_EDGE('',*,*,#8398,.F.);+#8411=ORIENTED_EDGE('',*,*,#5200,.F.);+#8412=CYLINDRICAL_SURFACE('',#8413,0.2);+#8413=AXIS2_PLACEMENT_3D('',#5205,#151,#5206);+#8414=ADVANCED_FACE('',(#8415),#8420,.F.);+#8415=FACE_BOUND('',#8416,.F.);+#8416=EDGE_LOOP('',(#8417,#5264,#8418,#8419));+#8417=ORIENTED_EDGE('',*,*,#5257,.T.);+#8418=ORIENTED_EDGE('',*,*,#8408,.F.);+#8419=ORIENTED_EDGE('',*,*,#5193,.F.);+#8420=PLANE('',#8421);+#8421=AXIS2_PLACEMENT_3D('',#5187,#8422,#5198);+#8422=DIRECTION('',(0.986322983713,1.095038486235E-16,0.16482406317));+#8423=ADVANCED_FACE('',(#8424),#8431,.T.);+#8424=FACE_BOUND('',#8425,.F.);+#8425=EDGE_LOOP('',(#8426,#5436,#8429,#8430));+#8426=ORIENTED_EDGE('',*,*,#8427,.T.);+#8427=EDGE_CURVE('',#5366,#5433,#8428,.T.);+#8428=LINE('',#5367,#122);+#8429=ORIENTED_EDGE('',*,*,#7597,.F.);+#8430=ORIENTED_EDGE('',*,*,#5370,.F.);+#8431=CYLINDRICAL_SURFACE('',#8432,0.2);+#8432=AXIS2_PLACEMENT_3D('',#5330,#151,#5240);+#8433=ADVANCED_FACE('',(#8434),#8441,.F.);+#8434=FACE_BOUND('',#8435,.F.);+#8435=EDGE_LOOP('',(#8436,#5431,#8439,#8440));+#8436=ORIENTED_EDGE('',*,*,#8437,.T.);+#8437=EDGE_CURVE('',#5360,#5427,#8438,.T.);+#8438=LINE('',#5361,#122);+#8439=ORIENTED_EDGE('',*,*,#8427,.F.);+#8440=ORIENTED_EDGE('',*,*,#5365,.F.);+#8441=PLANE('',#8442);+#8442=AXIS2_PLACEMENT_3D('',#5361,#8364,#5235);+#8443=ADVANCED_FACE('',(#8444),#8451,.F.);+#8444=FACE_BOUND('',#8445,.F.);+#8445=EDGE_LOOP('',(#8446,#5425,#8449,#8450));+#8446=ORIENTED_EDGE('',*,*,#8447,.T.);+#8447=EDGE_CURVE('',#5355,#5422,#8448,.T.);+#8448=LINE('',#5356,#122);+#8449=ORIENTED_EDGE('',*,*,#8437,.F.);+#8450=ORIENTED_EDGE('',*,*,#5359,.F.);+#8451=CYLINDRICAL_SURFACE('',#5363,1.E-01);+#8452=ADVANCED_FACE('',(#8453),#8460,.F.);+#8453=FACE_BOUND('',#8454,.F.);+#8454=EDGE_LOOP('',(#8455,#5420,#8458,#8459));+#8455=ORIENTED_EDGE('',*,*,#8456,.T.);+#8456=EDGE_CURVE('',#5350,#5417,#8457,.T.);+#8457=LINE('',#5351,#122);+#8458=ORIENTED_EDGE('',*,*,#8447,.F.);+#8459=ORIENTED_EDGE('',*,*,#5354,.F.);+#8460=PLANE('',#8461);+#8461=AXIS2_PLACEMENT_3D('',#5351,#3066,#137);+#8462=ADVANCED_FACE('',(#8463),#8470,.F.);+#8463=FACE_BOUND('',#8464,.F.);+#8464=EDGE_LOOP('',(#8465,#5415,#8468,#8469));+#8465=ORIENTED_EDGE('',*,*,#8466,.T.);+#8466=EDGE_CURVE('',#5345,#5412,#8467,.T.);+#8467=LINE('',#5346,#122);+#8468=ORIENTED_EDGE('',*,*,#8456,.F.);+#8469=ORIENTED_EDGE('',*,*,#5349,.F.);+#8470=PLANE('',#8471);+#8471=AXIS2_PLACEMENT_3D('',#5346,#137,#13);+#8472=ADVANCED_FACE('',(#8473),#8480,.F.);+#8473=FACE_BOUND('',#8474,.F.);+#8474=EDGE_LOOP('',(#8475,#5410,#8478,#8479));+#8475=ORIENTED_EDGE('',*,*,#8476,.T.);+#8476=EDGE_CURVE('',#5338,#5405,#8477,.T.);+#8477=LINE('',#5339,#122);+#8478=ORIENTED_EDGE('',*,*,#8466,.F.);+#8479=ORIENTED_EDGE('',*,*,#5344,.F.);+#8480=PLANE('',#8481);+#8481=AXIS2_PLACEMENT_3D('',#5339,#13,#28);+#8482=ADVANCED_FACE('',(#8483),#8490,.T.);+#8483=FACE_BOUND('',#8484,.F.);+#8484=EDGE_LOOP('',(#8485,#5403,#8488,#8489));+#8485=ORIENTED_EDGE('',*,*,#8486,.T.);+#8486=EDGE_CURVE('',#5333,#5400,#8487,.T.);+#8487=LINE('',#5334,#122);+#8488=ORIENTED_EDGE('',*,*,#8476,.F.);+#8489=ORIENTED_EDGE('',*,*,#5337,.F.);+#8490=CYLINDRICAL_SURFACE('',#8491,0.2);+#8491=AXIS2_PLACEMENT_3D('',#5342,#151,#5206);+#8492=ADVANCED_FACE('',(#8493),#8498,.F.);+#8493=FACE_BOUND('',#8494,.F.);+#8494=EDGE_LOOP('',(#8495,#5398,#8496,#8497));+#8495=ORIENTED_EDGE('',*,*,#5391,.T.);+#8496=ORIENTED_EDGE('',*,*,#8486,.F.);+#8497=ORIENTED_EDGE('',*,*,#5332,.F.);+#8498=PLANE('',#8499);+#8499=AXIS2_PLACEMENT_3D('',#5327,#8422,#5198);+#8500=ADVANCED_FACE('',(#8501),#8508,.T.);+#8501=FACE_BOUND('',#8502,.F.);+#8502=EDGE_LOOP('',(#8503,#5576,#8506,#8507));+#8503=ORIENTED_EDGE('',*,*,#8504,.T.);+#8504=EDGE_CURVE('',#5506,#5573,#8505,.T.);+#8505=LINE('',#5507,#122);+#8506=ORIENTED_EDGE('',*,*,#7609,.F.);+#8507=ORIENTED_EDGE('',*,*,#5510,.F.);+#8508=CYLINDRICAL_SURFACE('',#8509,0.2);+#8509=AXIS2_PLACEMENT_3D('',#5470,#151,#5240);+#8510=ADVANCED_FACE('',(#8511),#8518,.F.);+#8511=FACE_BOUND('',#8512,.F.);+#8512=EDGE_LOOP('',(#8513,#5571,#8516,#8517));+#8513=ORIENTED_EDGE('',*,*,#8514,.T.);+#8514=EDGE_CURVE('',#5500,#5567,#8515,.T.);+#8515=LINE('',#5501,#122);+#8516=ORIENTED_EDGE('',*,*,#8504,.F.);+#8517=ORIENTED_EDGE('',*,*,#5505,.F.);+#8518=PLANE('',#8519);+#8519=AXIS2_PLACEMENT_3D('',#5501,#8364,#5235);+#8520=ADVANCED_FACE('',(#8521),#8528,.F.);+#8521=FACE_BOUND('',#8522,.F.);+#8522=EDGE_LOOP('',(#8523,#5565,#8526,#8527));+#8523=ORIENTED_EDGE('',*,*,#8524,.T.);+#8524=EDGE_CURVE('',#5495,#5562,#8525,.T.);+#8525=LINE('',#5496,#122);+#8526=ORIENTED_EDGE('',*,*,#8514,.F.);+#8527=ORIENTED_EDGE('',*,*,#5499,.F.);+#8528=CYLINDRICAL_SURFACE('',#5503,1.E-01);+#8529=ADVANCED_FACE('',(#8530),#8537,.F.);+#8530=FACE_BOUND('',#8531,.F.);+#8531=EDGE_LOOP('',(#8532,#5560,#8535,#8536));+#8532=ORIENTED_EDGE('',*,*,#8533,.T.);+#8533=EDGE_CURVE('',#5490,#5557,#8534,.T.);+#8534=LINE('',#5491,#122);+#8535=ORIENTED_EDGE('',*,*,#8524,.F.);+#8536=ORIENTED_EDGE('',*,*,#5494,.F.);+#8537=PLANE('',#8538);+#8538=AXIS2_PLACEMENT_3D('',#5491,#3066,#137);+#8539=ADVANCED_FACE('',(#8540),#8547,.F.);+#8540=FACE_BOUND('',#8541,.F.);+#8541=EDGE_LOOP('',(#8542,#5555,#8545,#8546));+#8542=ORIENTED_EDGE('',*,*,#8543,.T.);+#8543=EDGE_CURVE('',#5485,#5552,#8544,.T.);+#8544=LINE('',#5486,#122);+#8545=ORIENTED_EDGE('',*,*,#8533,.F.);+#8546=ORIENTED_EDGE('',*,*,#5489,.F.);+#8547=PLANE('',#8548);+#8548=AXIS2_PLACEMENT_3D('',#5486,#137,#13);+#8549=ADVANCED_FACE('',(#8550),#8557,.F.);+#8550=FACE_BOUND('',#8551,.F.);+#8551=EDGE_LOOP('',(#8552,#5550,#8555,#8556));+#8552=ORIENTED_EDGE('',*,*,#8553,.T.);+#8553=EDGE_CURVE('',#5478,#5545,#8554,.T.);+#8554=LINE('',#5479,#122);+#8555=ORIENTED_EDGE('',*,*,#8543,.F.);+#8556=ORIENTED_EDGE('',*,*,#5484,.F.);+#8557=PLANE('',#8558);+#8558=AXIS2_PLACEMENT_3D('',#5479,#13,#28);+#8559=ADVANCED_FACE('',(#8560),#8567,.T.);+#8560=FACE_BOUND('',#8561,.F.);+#8561=EDGE_LOOP('',(#8562,#5543,#8565,#8566));+#8562=ORIENTED_EDGE('',*,*,#8563,.T.);+#8563=EDGE_CURVE('',#5473,#5540,#8564,.T.);+#8564=LINE('',#5474,#122);+#8565=ORIENTED_EDGE('',*,*,#8553,.F.);+#8566=ORIENTED_EDGE('',*,*,#5477,.F.);+#8567=CYLINDRICAL_SURFACE('',#8568,0.2);+#8568=AXIS2_PLACEMENT_3D('',#5482,#151,#5206);+#8569=ADVANCED_FACE('',(#8570),#8575,.F.);+#8570=FACE_BOUND('',#8571,.F.);+#8571=EDGE_LOOP('',(#8572,#5538,#8573,#8574));+#8572=ORIENTED_EDGE('',*,*,#5531,.T.);+#8573=ORIENTED_EDGE('',*,*,#8563,.F.);+#8574=ORIENTED_EDGE('',*,*,#5472,.F.);+#8575=PLANE('',#8576);+#8576=AXIS2_PLACEMENT_3D('',#5467,#8422,#5198);+#8577=ADVANCED_FACE('',(#8578),#8585,.T.);+#8578=FACE_BOUND('',#8579,.F.);+#8579=EDGE_LOOP('',(#8580,#5716,#8583,#8584));+#8580=ORIENTED_EDGE('',*,*,#8581,.T.);+#8581=EDGE_CURVE('',#5646,#5713,#8582,.T.);+#8582=LINE('',#5647,#122);+#8583=ORIENTED_EDGE('',*,*,#7621,.F.);+#8584=ORIENTED_EDGE('',*,*,#5650,.F.);+#8585=CYLINDRICAL_SURFACE('',#8586,0.2);+#8586=AXIS2_PLACEMENT_3D('',#5610,#151,#5240);+#8587=ADVANCED_FACE('',(#8588),#8595,.F.);+#8588=FACE_BOUND('',#8589,.F.);+#8589=EDGE_LOOP('',(#8590,#5711,#8593,#8594));+#8590=ORIENTED_EDGE('',*,*,#8591,.T.);+#8591=EDGE_CURVE('',#5640,#5707,#8592,.T.);+#8592=LINE('',#5641,#122);+#8593=ORIENTED_EDGE('',*,*,#8581,.F.);+#8594=ORIENTED_EDGE('',*,*,#5645,.F.);+#8595=PLANE('',#8596);+#8596=AXIS2_PLACEMENT_3D('',#5641,#8364,#5235);+#8597=ADVANCED_FACE('',(#8598),#8605,.F.);+#8598=FACE_BOUND('',#8599,.F.);+#8599=EDGE_LOOP('',(#8600,#5705,#8603,#8604));+#8600=ORIENTED_EDGE('',*,*,#8601,.T.);+#8601=EDGE_CURVE('',#5635,#5702,#8602,.T.);+#8602=LINE('',#5636,#122);+#8603=ORIENTED_EDGE('',*,*,#8591,.F.);+#8604=ORIENTED_EDGE('',*,*,#5639,.F.);+#8605=CYLINDRICAL_SURFACE('',#5643,1.E-01);+#8606=ADVANCED_FACE('',(#8607),#8614,.F.);+#8607=FACE_BOUND('',#8608,.F.);+#8608=EDGE_LOOP('',(#8609,#5700,#8612,#8613));+#8609=ORIENTED_EDGE('',*,*,#8610,.T.);+#8610=EDGE_CURVE('',#5630,#5697,#8611,.T.);+#8611=LINE('',#5631,#122);+#8612=ORIENTED_EDGE('',*,*,#8601,.F.);+#8613=ORIENTED_EDGE('',*,*,#5634,.F.);+#8614=PLANE('',#8615);+#8615=AXIS2_PLACEMENT_3D('',#5631,#3066,#137);+#8616=ADVANCED_FACE('',(#8617),#8624,.F.);+#8617=FACE_BOUND('',#8618,.F.);+#8618=EDGE_LOOP('',(#8619,#5695,#8622,#8623));+#8619=ORIENTED_EDGE('',*,*,#8620,.T.);+#8620=EDGE_CURVE('',#5625,#5692,#8621,.T.);+#8621=LINE('',#5626,#122);+#8622=ORIENTED_EDGE('',*,*,#8610,.F.);+#8623=ORIENTED_EDGE('',*,*,#5629,.F.);+#8624=PLANE('',#8625);+#8625=AXIS2_PLACEMENT_3D('',#5626,#137,#13);+#8626=ADVANCED_FACE('',(#8627),#8634,.F.);+#8627=FACE_BOUND('',#8628,.F.);+#8628=EDGE_LOOP('',(#8629,#5690,#8632,#8633));+#8629=ORIENTED_EDGE('',*,*,#8630,.T.);+#8630=EDGE_CURVE('',#5618,#5685,#8631,.T.);+#8631=LINE('',#5619,#122);+#8632=ORIENTED_EDGE('',*,*,#8620,.F.);+#8633=ORIENTED_EDGE('',*,*,#5624,.F.);+#8634=PLANE('',#8635);+#8635=AXIS2_PLACEMENT_3D('',#5619,#13,#28);+#8636=ADVANCED_FACE('',(#8637),#8644,.T.);+#8637=FACE_BOUND('',#8638,.F.);+#8638=EDGE_LOOP('',(#8639,#5683,#8642,#8643));+#8639=ORIENTED_EDGE('',*,*,#8640,.T.);+#8640=EDGE_CURVE('',#5613,#5680,#8641,.T.);+#8641=LINE('',#5614,#122);+#8642=ORIENTED_EDGE('',*,*,#8630,.F.);+#8643=ORIENTED_EDGE('',*,*,#5617,.F.);+#8644=CYLINDRICAL_SURFACE('',#8645,0.2);+#8645=AXIS2_PLACEMENT_3D('',#5622,#151,#5206);+#8646=ADVANCED_FACE('',(#8647),#8652,.F.);+#8647=FACE_BOUND('',#8648,.F.);+#8648=EDGE_LOOP('',(#8649,#5678,#8650,#8651));+#8649=ORIENTED_EDGE('',*,*,#5671,.T.);+#8650=ORIENTED_EDGE('',*,*,#8640,.F.);+#8651=ORIENTED_EDGE('',*,*,#5612,.F.);+#8652=PLANE('',#8653);+#8653=AXIS2_PLACEMENT_3D('',#5607,#8422,#5198);+#8654=ADVANCED_FACE('',(#8655),#8662,.T.);+#8655=FACE_BOUND('',#8656,.F.);+#8656=EDGE_LOOP('',(#8657,#5856,#8660,#8661));+#8657=ORIENTED_EDGE('',*,*,#8658,.T.);+#8658=EDGE_CURVE('',#5786,#5853,#8659,.T.);+#8659=LINE('',#5787,#122);+#8660=ORIENTED_EDGE('',*,*,#7633,.F.);+#8661=ORIENTED_EDGE('',*,*,#5790,.F.);+#8662=CYLINDRICAL_SURFACE('',#8663,0.2);+#8663=AXIS2_PLACEMENT_3D('',#5750,#151,#5240);+#8664=ADVANCED_FACE('',(#8665),#8672,.F.);+#8665=FACE_BOUND('',#8666,.F.);+#8666=EDGE_LOOP('',(#8667,#5851,#8670,#8671));+#8667=ORIENTED_EDGE('',*,*,#8668,.T.);+#8668=EDGE_CURVE('',#5780,#5847,#8669,.T.);+#8669=LINE('',#5781,#122);+#8670=ORIENTED_EDGE('',*,*,#8658,.F.);+#8671=ORIENTED_EDGE('',*,*,#5785,.F.);+#8672=PLANE('',#8673);+#8673=AXIS2_PLACEMENT_3D('',#5781,#8364,#5235);+#8674=ADVANCED_FACE('',(#8675),#8682,.F.);+#8675=FACE_BOUND('',#8676,.F.);+#8676=EDGE_LOOP('',(#8677,#5845,#8680,#8681));+#8677=ORIENTED_EDGE('',*,*,#8678,.T.);+#8678=EDGE_CURVE('',#5775,#5842,#8679,.T.);+#8679=LINE('',#5776,#122);+#8680=ORIENTED_EDGE('',*,*,#8668,.F.);+#8681=ORIENTED_EDGE('',*,*,#5779,.F.);+#8682=CYLINDRICAL_SURFACE('',#5783,1.E-01);+#8683=ADVANCED_FACE('',(#8684),#8691,.F.);+#8684=FACE_BOUND('',#8685,.F.);+#8685=EDGE_LOOP('',(#8686,#5840,#8689,#8690));+#8686=ORIENTED_EDGE('',*,*,#8687,.T.);+#8687=EDGE_CURVE('',#5770,#5837,#8688,.T.);+#8688=LINE('',#5771,#122);+#8689=ORIENTED_EDGE('',*,*,#8678,.F.);+#8690=ORIENTED_EDGE('',*,*,#5774,.F.);+#8691=PLANE('',#8692);+#8692=AXIS2_PLACEMENT_3D('',#5771,#3066,#137);+#8693=ADVANCED_FACE('',(#8694),#8701,.F.);+#8694=FACE_BOUND('',#8695,.F.);+#8695=EDGE_LOOP('',(#8696,#5835,#8699,#8700));+#8696=ORIENTED_EDGE('',*,*,#8697,.T.);+#8697=EDGE_CURVE('',#5765,#5832,#8698,.T.);+#8698=LINE('',#5766,#122);+#8699=ORIENTED_EDGE('',*,*,#8687,.F.);+#8700=ORIENTED_EDGE('',*,*,#5769,.F.);+#8701=PLANE('',#8702);+#8702=AXIS2_PLACEMENT_3D('',#5766,#137,#13);+#8703=ADVANCED_FACE('',(#8704),#8711,.F.);+#8704=FACE_BOUND('',#8705,.F.);+#8705=EDGE_LOOP('',(#8706,#5830,#8709,#8710));+#8706=ORIENTED_EDGE('',*,*,#8707,.T.);+#8707=EDGE_CURVE('',#5758,#5825,#8708,.T.);+#8708=LINE('',#5759,#122);+#8709=ORIENTED_EDGE('',*,*,#8697,.F.);+#8710=ORIENTED_EDGE('',*,*,#5764,.F.);+#8711=PLANE('',#8712);+#8712=AXIS2_PLACEMENT_3D('',#5759,#13,#28);+#8713=ADVANCED_FACE('',(#8714),#8721,.T.);+#8714=FACE_BOUND('',#8715,.F.);+#8715=EDGE_LOOP('',(#8716,#5823,#8719,#8720));+#8716=ORIENTED_EDGE('',*,*,#8717,.T.);+#8717=EDGE_CURVE('',#5753,#5820,#8718,.T.);+#8718=LINE('',#5754,#122);+#8719=ORIENTED_EDGE('',*,*,#8707,.F.);+#8720=ORIENTED_EDGE('',*,*,#5757,.F.);+#8721=CYLINDRICAL_SURFACE('',#8722,0.2);+#8722=AXIS2_PLACEMENT_3D('',#5762,#151,#5206);+#8723=ADVANCED_FACE('',(#8724),#8729,.F.);+#8724=FACE_BOUND('',#8725,.F.);+#8725=EDGE_LOOP('',(#8726,#5818,#8727,#8728));+#8726=ORIENTED_EDGE('',*,*,#5811,.T.);+#8727=ORIENTED_EDGE('',*,*,#8717,.F.);+#8728=ORIENTED_EDGE('',*,*,#5752,.F.);+#8729=PLANE('',#8730);+#8730=AXIS2_PLACEMENT_3D('',#5747,#8422,#5198);+#8731=ADVANCED_FACE('',(#8732),#8739,.T.);+#8732=FACE_BOUND('',#8733,.F.);+#8733=EDGE_LOOP('',(#8734,#5996,#8737,#8738));+#8734=ORIENTED_EDGE('',*,*,#8735,.T.);+#8735=EDGE_CURVE('',#5926,#5993,#8736,.T.);+#8736=LINE('',#5927,#122);+#8737=ORIENTED_EDGE('',*,*,#7645,.F.);+#8738=ORIENTED_EDGE('',*,*,#5930,.F.);+#8739=CYLINDRICAL_SURFACE('',#8740,0.2);+#8740=AXIS2_PLACEMENT_3D('',#5890,#151,#5240);+#8741=ADVANCED_FACE('',(#8742),#8749,.F.);+#8742=FACE_BOUND('',#8743,.F.);+#8743=EDGE_LOOP('',(#8744,#5991,#8747,#8748));+#8744=ORIENTED_EDGE('',*,*,#8745,.T.);+#8745=EDGE_CURVE('',#5920,#5987,#8746,.T.);+#8746=LINE('',#5921,#122);+#8747=ORIENTED_EDGE('',*,*,#8735,.F.);+#8748=ORIENTED_EDGE('',*,*,#5925,.F.);+#8749=PLANE('',#8750);+#8750=AXIS2_PLACEMENT_3D('',#5921,#8364,#5235);+#8751=ADVANCED_FACE('',(#8752),#8759,.F.);+#8752=FACE_BOUND('',#8753,.F.);+#8753=EDGE_LOOP('',(#8754,#5985,#8757,#8758));+#8754=ORIENTED_EDGE('',*,*,#8755,.T.);+#8755=EDGE_CURVE('',#5915,#5982,#8756,.T.);+#8756=LINE('',#5916,#122);+#8757=ORIENTED_EDGE('',*,*,#8745,.F.);+#8758=ORIENTED_EDGE('',*,*,#5919,.F.);+#8759=CYLINDRICAL_SURFACE('',#5923,1.E-01);+#8760=ADVANCED_FACE('',(#8761),#8768,.F.);+#8761=FACE_BOUND('',#8762,.F.);+#8762=EDGE_LOOP('',(#8763,#5980,#8766,#8767));+#8763=ORIENTED_EDGE('',*,*,#8764,.T.);+#8764=EDGE_CURVE('',#5910,#5977,#8765,.T.);+#8765=LINE('',#5911,#122);+#8766=ORIENTED_EDGE('',*,*,#8755,.F.);+#8767=ORIENTED_EDGE('',*,*,#5914,.F.);+#8768=PLANE('',#8769);+#8769=AXIS2_PLACEMENT_3D('',#5911,#3066,#137);+#8770=ADVANCED_FACE('',(#8771),#8778,.F.);+#8771=FACE_BOUND('',#8772,.F.);+#8772=EDGE_LOOP('',(#8773,#5975,#8776,#8777));+#8773=ORIENTED_EDGE('',*,*,#8774,.T.);+#8774=EDGE_CURVE('',#5905,#5972,#8775,.T.);+#8775=LINE('',#5906,#122);+#8776=ORIENTED_EDGE('',*,*,#8764,.F.);+#8777=ORIENTED_EDGE('',*,*,#5909,.F.);+#8778=PLANE('',#8779);+#8779=AXIS2_PLACEMENT_3D('',#5906,#137,#13);+#8780=ADVANCED_FACE('',(#8781),#8788,.F.);+#8781=FACE_BOUND('',#8782,.F.);+#8782=EDGE_LOOP('',(#8783,#5970,#8786,#8787));+#8783=ORIENTED_EDGE('',*,*,#8784,.T.);+#8784=EDGE_CURVE('',#5898,#5965,#8785,.T.);+#8785=LINE('',#5899,#122);+#8786=ORIENTED_EDGE('',*,*,#8774,.F.);+#8787=ORIENTED_EDGE('',*,*,#5904,.F.);+#8788=PLANE('',#8789);+#8789=AXIS2_PLACEMENT_3D('',#5899,#13,#28);+#8790=ADVANCED_FACE('',(#8791),#8798,.T.);+#8791=FACE_BOUND('',#8792,.F.);+#8792=EDGE_LOOP('',(#8793,#5963,#8796,#8797));+#8793=ORIENTED_EDGE('',*,*,#8794,.T.);+#8794=EDGE_CURVE('',#5893,#5960,#8795,.T.);+#8795=LINE('',#5894,#122);+#8796=ORIENTED_EDGE('',*,*,#8784,.F.);+#8797=ORIENTED_EDGE('',*,*,#5897,.F.);+#8798=CYLINDRICAL_SURFACE('',#8799,0.2);+#8799=AXIS2_PLACEMENT_3D('',#5902,#151,#5206);+#8800=ADVANCED_FACE('',(#8801),#8806,.F.);+#8801=FACE_BOUND('',#8802,.F.);+#8802=EDGE_LOOP('',(#8803,#5958,#8804,#8805));+#8803=ORIENTED_EDGE('',*,*,#5951,.T.);+#8804=ORIENTED_EDGE('',*,*,#8794,.F.);+#8805=ORIENTED_EDGE('',*,*,#5892,.F.);+#8806=PLANE('',#8807);+#8807=AXIS2_PLACEMENT_3D('',#5887,#8422,#5198);+#8808=ADVANCED_FACE('',(#8809),#8816,.T.);+#8809=FACE_BOUND('',#8810,.F.);+#8810=EDGE_LOOP('',(#8811,#6136,#8814,#8815));+#8811=ORIENTED_EDGE('',*,*,#8812,.T.);+#8812=EDGE_CURVE('',#6066,#6133,#8813,.T.);+#8813=LINE('',#6067,#122);+#8814=ORIENTED_EDGE('',*,*,#7657,.F.);+#8815=ORIENTED_EDGE('',*,*,#6070,.F.);+#8816=CYLINDRICAL_SURFACE('',#8817,0.2);+#8817=AXIS2_PLACEMENT_3D('',#6030,#151,#5240);+#8818=ADVANCED_FACE('',(#8819),#8826,.F.);+#8819=FACE_BOUND('',#8820,.F.);+#8820=EDGE_LOOP('',(#8821,#6131,#8824,#8825));+#8821=ORIENTED_EDGE('',*,*,#8822,.T.);+#8822=EDGE_CURVE('',#6060,#6127,#8823,.T.);+#8823=LINE('',#6061,#122);+#8824=ORIENTED_EDGE('',*,*,#8812,.F.);+#8825=ORIENTED_EDGE('',*,*,#6065,.F.);+#8826=PLANE('',#8827);+#8827=AXIS2_PLACEMENT_3D('',#6061,#8364,#5235);+#8828=ADVANCED_FACE('',(#8829),#8836,.F.);+#8829=FACE_BOUND('',#8830,.F.);+#8830=EDGE_LOOP('',(#8831,#6125,#8834,#8835));+#8831=ORIENTED_EDGE('',*,*,#8832,.T.);+#8832=EDGE_CURVE('',#6055,#6122,#8833,.T.);+#8833=LINE('',#6056,#122);+#8834=ORIENTED_EDGE('',*,*,#8822,.F.);+#8835=ORIENTED_EDGE('',*,*,#6059,.F.);+#8836=CYLINDRICAL_SURFACE('',#6063,1.E-01);+#8837=ADVANCED_FACE('',(#8838),#8845,.F.);+#8838=FACE_BOUND('',#8839,.F.);+#8839=EDGE_LOOP('',(#8840,#6120,#8843,#8844));+#8840=ORIENTED_EDGE('',*,*,#8841,.T.);+#8841=EDGE_CURVE('',#6050,#6117,#8842,.T.);+#8842=LINE('',#6051,#122);+#8843=ORIENTED_EDGE('',*,*,#8832,.F.);+#8844=ORIENTED_EDGE('',*,*,#6054,.F.);+#8845=PLANE('',#8846);+#8846=AXIS2_PLACEMENT_3D('',#6051,#3066,#137);+#8847=ADVANCED_FACE('',(#8848),#8855,.F.);+#8848=FACE_BOUND('',#8849,.F.);+#8849=EDGE_LOOP('',(#8850,#6115,#8853,#8854));+#8850=ORIENTED_EDGE('',*,*,#8851,.T.);+#8851=EDGE_CURVE('',#6045,#6112,#8852,.T.);+#8852=LINE('',#6046,#122);+#8853=ORIENTED_EDGE('',*,*,#8841,.F.);+#8854=ORIENTED_EDGE('',*,*,#6049,.F.);+#8855=PLANE('',#8856);+#8856=AXIS2_PLACEMENT_3D('',#6046,#137,#13);+#8857=ADVANCED_FACE('',(#8858),#8865,.F.);+#8858=FACE_BOUND('',#8859,.F.);+#8859=EDGE_LOOP('',(#8860,#6110,#8863,#8864));+#8860=ORIENTED_EDGE('',*,*,#8861,.T.);+#8861=EDGE_CURVE('',#6038,#6105,#8862,.T.);+#8862=LINE('',#6039,#122);+#8863=ORIENTED_EDGE('',*,*,#8851,.F.);+#8864=ORIENTED_EDGE('',*,*,#6044,.F.);+#8865=PLANE('',#8866);+#8866=AXIS2_PLACEMENT_3D('',#6039,#13,#28);+#8867=ADVANCED_FACE('',(#8868),#8875,.T.);+#8868=FACE_BOUND('',#8869,.F.);+#8869=EDGE_LOOP('',(#8870,#6103,#8873,#8874));+#8870=ORIENTED_EDGE('',*,*,#8871,.T.);+#8871=EDGE_CURVE('',#6033,#6100,#8872,.T.);+#8872=LINE('',#6034,#122);+#8873=ORIENTED_EDGE('',*,*,#8861,.F.);+#8874=ORIENTED_EDGE('',*,*,#6037,.F.);+#8875=CYLINDRICAL_SURFACE('',#8876,0.2);+#8876=AXIS2_PLACEMENT_3D('',#6042,#151,#5206);+#8877=ADVANCED_FACE('',(#8878),#8883,.F.);+#8878=FACE_BOUND('',#8879,.F.);+#8879=EDGE_LOOP('',(#8880,#6098,#8881,#8882));+#8880=ORIENTED_EDGE('',*,*,#6091,.T.);+#8881=ORIENTED_EDGE('',*,*,#8871,.F.);+#8882=ORIENTED_EDGE('',*,*,#6032,.F.);+#8883=PLANE('',#8884);+#8884=AXIS2_PLACEMENT_3D('',#6027,#8422,#5198);+#8885=ADVANCED_FACE('',(#8886),#8893,.T.);+#8886=FACE_BOUND('',#8887,.F.);+#8887=EDGE_LOOP('',(#8888,#6276,#8891,#8892));+#8888=ORIENTED_EDGE('',*,*,#8889,.T.);+#8889=EDGE_CURVE('',#6206,#6273,#8890,.T.);+#8890=LINE('',#6207,#122);+#8891=ORIENTED_EDGE('',*,*,#7669,.F.);+#8892=ORIENTED_EDGE('',*,*,#6210,.F.);+#8893=CYLINDRICAL_SURFACE('',#8894,0.2);+#8894=AXIS2_PLACEMENT_3D('',#6170,#151,#5240);+#8895=ADVANCED_FACE('',(#8896),#8903,.F.);+#8896=FACE_BOUND('',#8897,.F.);+#8897=EDGE_LOOP('',(#8898,#6271,#8901,#8902));+#8898=ORIENTED_EDGE('',*,*,#8899,.T.);+#8899=EDGE_CURVE('',#6200,#6267,#8900,.T.);+#8900=LINE('',#6201,#122);+#8901=ORIENTED_EDGE('',*,*,#8889,.F.);+#8902=ORIENTED_EDGE('',*,*,#6205,.F.);+#8903=PLANE('',#8904);+#8904=AXIS2_PLACEMENT_3D('',#6201,#8364,#5235);+#8905=ADVANCED_FACE('',(#8906),#8913,.F.);+#8906=FACE_BOUND('',#8907,.F.);+#8907=EDGE_LOOP('',(#8908,#6265,#8911,#8912));+#8908=ORIENTED_EDGE('',*,*,#8909,.T.);+#8909=EDGE_CURVE('',#6195,#6262,#8910,.T.);+#8910=LINE('',#6196,#122);+#8911=ORIENTED_EDGE('',*,*,#8899,.F.);+#8912=ORIENTED_EDGE('',*,*,#6199,.F.);+#8913=CYLINDRICAL_SURFACE('',#6203,1.E-01);+#8914=ADVANCED_FACE('',(#8915),#8922,.F.);+#8915=FACE_BOUND('',#8916,.F.);+#8916=EDGE_LOOP('',(#8917,#6260,#8920,#8921));+#8917=ORIENTED_EDGE('',*,*,#8918,.T.);+#8918=EDGE_CURVE('',#6190,#6257,#8919,.T.);+#8919=LINE('',#6191,#122);+#8920=ORIENTED_EDGE('',*,*,#8909,.F.);+#8921=ORIENTED_EDGE('',*,*,#6194,.F.);+#8922=PLANE('',#8923);+#8923=AXIS2_PLACEMENT_3D('',#6191,#3066,#137);+#8924=ADVANCED_FACE('',(#8925),#8932,.F.);+#8925=FACE_BOUND('',#8926,.F.);+#8926=EDGE_LOOP('',(#8927,#6255,#8930,#8931));+#8927=ORIENTED_EDGE('',*,*,#8928,.T.);+#8928=EDGE_CURVE('',#6185,#6252,#8929,.T.);+#8929=LINE('',#6186,#122);+#8930=ORIENTED_EDGE('',*,*,#8918,.F.);+#8931=ORIENTED_EDGE('',*,*,#6189,.F.);+#8932=PLANE('',#8933);+#8933=AXIS2_PLACEMENT_3D('',#6186,#137,#13);+#8934=ADVANCED_FACE('',(#8935),#8942,.F.);+#8935=FACE_BOUND('',#8936,.F.);+#8936=EDGE_LOOP('',(#8937,#6250,#8940,#8941));+#8937=ORIENTED_EDGE('',*,*,#8938,.T.);+#8938=EDGE_CURVE('',#6178,#6245,#8939,.T.);+#8939=LINE('',#6179,#122);+#8940=ORIENTED_EDGE('',*,*,#8928,.F.);+#8941=ORIENTED_EDGE('',*,*,#6184,.F.);+#8942=PLANE('',#8943);+#8943=AXIS2_PLACEMENT_3D('',#6179,#13,#28);+#8944=ADVANCED_FACE('',(#8945),#8952,.T.);+#8945=FACE_BOUND('',#8946,.F.);+#8946=EDGE_LOOP('',(#8947,#6243,#8950,#8951));+#8947=ORIENTED_EDGE('',*,*,#8948,.T.);+#8948=EDGE_CURVE('',#6173,#6240,#8949,.T.);+#8949=LINE('',#6174,#122);+#8950=ORIENTED_EDGE('',*,*,#8938,.F.);+#8951=ORIENTED_EDGE('',*,*,#6177,.F.);+#8952=CYLINDRICAL_SURFACE('',#8953,0.2);+#8953=AXIS2_PLACEMENT_3D('',#6182,#151,#5206);+#8954=ADVANCED_FACE('',(#8955),#8960,.F.);+#8955=FACE_BOUND('',#8956,.F.);+#8956=EDGE_LOOP('',(#8957,#6238,#8958,#8959));+#8957=ORIENTED_EDGE('',*,*,#6231,.T.);+#8958=ORIENTED_EDGE('',*,*,#8948,.F.);+#8959=ORIENTED_EDGE('',*,*,#6172,.F.);+#8960=PLANE('',#8961);+#8961=AXIS2_PLACEMENT_3D('',#6167,#8422,#5198);+#8962=ADVANCED_FACE('',(#8963),#8972,.F.);+#8963=FACE_BOUND('',#8964,.F.);+#8964=EDGE_LOOP('',(#8965,#8966,#6441,#8969,#8970,#8971));+#8965=ORIENTED_EDGE('',*,*,#6374,.F.);+#8966=ORIENTED_EDGE('',*,*,#8967,.T.);+#8967=EDGE_CURVE('',#6369,#6437,#8968,.T.);+#8968=LINE('',#6301,#2753);+#8969=ORIENTED_EDGE('',*,*,#6462,.T.);+#8970=ORIENTED_EDGE('',*,*,#7713,.F.);+#8971=ORIENTED_EDGE('',*,*,#6297,.F.);+#8972=PLANE('',#8973);+#8973=AXIS2_PLACEMENT_3D('',#6301,#3066,#4056);+#8974=ADVANCED_FACE('',(#8975),#8982,.T.);+#8975=FACE_BOUND('',#8976,.F.);+#8976=EDGE_LOOP('',(#8977,#6435,#8980,#8981));+#8977=ORIENTED_EDGE('',*,*,#8978,.T.);+#8978=EDGE_CURVE('',#6362,#6432,#8979,.T.);+#8979=LINE('',#6363,#2753);+#8980=ORIENTED_EDGE('',*,*,#8967,.F.);+#8981=ORIENTED_EDGE('',*,*,#6368,.F.);+#8982=CYLINDRICAL_SURFACE('',#8983,0.2);+#8983=AXIS2_PLACEMENT_3D('',#6320,#6321,#6372);+#8984=ADVANCED_FACE('',(#8985),#8992,.F.);+#8985=FACE_BOUND('',#8986,.F.);+#8986=EDGE_LOOP('',(#8987,#6430,#8990,#8991));+#8987=ORIENTED_EDGE('',*,*,#8988,.T.);+#8988=EDGE_CURVE('',#6355,#6426,#8989,.T.);+#8989=LINE('',#6356,#2753);+#8990=ORIENTED_EDGE('',*,*,#8978,.F.);+#8991=ORIENTED_EDGE('',*,*,#6361,.F.);+#8992=PLANE('',#8993);+#8993=AXIS2_PLACEMENT_3D('',#6356,#8994,#6366);+#8994=DIRECTION('',(1.095038486235E-16,0.986322983713,-0.16482406317));+#8995=ADVANCED_FACE('',(#8996),#9003,.F.);+#8996=FACE_BOUND('',#8997,.F.);+#8997=EDGE_LOOP('',(#8998,#6424,#9001,#9002));+#8998=ORIENTED_EDGE('',*,*,#8999,.T.);+#8999=EDGE_CURVE('',#6350,#6421,#9000,.T.);+#9000=LINE('',#6351,#2753);+#9001=ORIENTED_EDGE('',*,*,#8988,.F.);+#9002=ORIENTED_EDGE('',*,*,#6354,.F.);+#9003=CYLINDRICAL_SURFACE('',#6358,1.E-01);+#9004=ADVANCED_FACE('',(#9005),#9012,.F.);+#9005=FACE_BOUND('',#9006,.F.);+#9006=EDGE_LOOP('',(#9007,#6419,#9010,#9011));+#9007=ORIENTED_EDGE('',*,*,#9008,.T.);+#9008=EDGE_CURVE('',#6345,#6416,#9009,.T.);+#9009=LINE('',#6346,#2753);+#9010=ORIENTED_EDGE('',*,*,#8999,.F.);+#9011=ORIENTED_EDGE('',*,*,#6349,.F.);+#9012=PLANE('',#9013);+#9013=AXIS2_PLACEMENT_3D('',#6346,#3066,#4056);+#9014=ADVANCED_FACE('',(#9015),#9022,.F.);+#9015=FACE_BOUND('',#9016,.F.);+#9016=EDGE_LOOP('',(#9017,#6414,#9020,#9021));+#9017=ORIENTED_EDGE('',*,*,#9018,.T.);+#9018=EDGE_CURVE('',#6340,#6411,#9019,.T.);+#9019=LINE('',#6341,#2753);+#9020=ORIENTED_EDGE('',*,*,#9008,.F.);+#9021=ORIENTED_EDGE('',*,*,#6344,.F.);+#9022=PLANE('',#9023);+#9023=AXIS2_PLACEMENT_3D('',#6341,#4056,#13);+#9024=ADVANCED_FACE('',(#9025),#9032,.F.);+#9025=FACE_BOUND('',#9026,.F.);+#9026=EDGE_LOOP('',(#9027,#6409,#9030,#9031));+#9027=ORIENTED_EDGE('',*,*,#9028,.T.);+#9028=EDGE_CURVE('',#6332,#6404,#9029,.T.);+#9029=LINE('',#6333,#2753);+#9030=ORIENTED_EDGE('',*,*,#9018,.F.);+#9031=ORIENTED_EDGE('',*,*,#6339,.F.);+#9032=PLANE('',#9033);+#9033=AXIS2_PLACEMENT_3D('',#6333,#13,#2742);+#9034=ADVANCED_FACE('',(#9035),#9042,.T.);+#9035=FACE_BOUND('',#9036,.F.);+#9036=EDGE_LOOP('',(#9037,#6402,#9040,#9041));+#9037=ORIENTED_EDGE('',*,*,#9038,.T.);+#9038=EDGE_CURVE('',#6325,#6399,#9039,.T.);+#9039=LINE('',#6326,#2753);+#9040=ORIENTED_EDGE('',*,*,#9028,.F.);+#9041=ORIENTED_EDGE('',*,*,#6331,.F.);+#9042=CYLINDRICAL_SURFACE('',#9043,0.2);+#9043=AXIS2_PLACEMENT_3D('',#6336,#6321,#6337);+#9044=ADVANCED_FACE('',(#9045),#9050,.F.);+#9045=FACE_BOUND('',#9046,.F.);+#9046=EDGE_LOOP('',(#9047,#6397,#9048,#9049));+#9047=ORIENTED_EDGE('',*,*,#6390,.T.);+#9048=ORIENTED_EDGE('',*,*,#9038,.F.);+#9049=ORIENTED_EDGE('',*,*,#6324,.F.);+#9050=PLANE('',#9051);+#9051=AXIS2_PLACEMENT_3D('',#6317,#9052,#6329);+#9052=DIRECTION('',(-1.095038486235E-16,-0.986322983713,0.16482406317));+#9053=ADVANCED_FACE('',(#9054),#9063,.F.);+#9054=FACE_BOUND('',#9055,.F.);+#9055=EDGE_LOOP('',(#9056,#9057,#6586,#9060,#9061,#9062));+#9056=ORIENTED_EDGE('',*,*,#6519,.F.);+#9057=ORIENTED_EDGE('',*,*,#9058,.T.);+#9058=EDGE_CURVE('',#6515,#6582,#9059,.T.);+#9059=LINE('',#6456,#2753);+#9060=ORIENTED_EDGE('',*,*,#6607,.T.);+#9061=ORIENTED_EDGE('',*,*,#7716,.F.);+#9062=ORIENTED_EDGE('',*,*,#6452,.F.);+#9063=PLANE('',#9064);+#9064=AXIS2_PLACEMENT_3D('',#6456,#3066,#4056);+#9065=ADVANCED_FACE('',(#9066),#9073,.T.);+#9066=FACE_BOUND('',#9067,.F.);+#9067=EDGE_LOOP('',(#9068,#6580,#9071,#9072));+#9068=ORIENTED_EDGE('',*,*,#9069,.T.);+#9069=EDGE_CURVE('',#6510,#6577,#9070,.T.);+#9070=LINE('',#6511,#2753);+#9071=ORIENTED_EDGE('',*,*,#9058,.F.);+#9072=ORIENTED_EDGE('',*,*,#6514,.F.);+#9073=CYLINDRICAL_SURFACE('',#9074,0.2);+#9074=AXIS2_PLACEMENT_3D('',#6474,#6321,#6372);+#9075=ADVANCED_FACE('',(#9076),#9083,.F.);+#9076=FACE_BOUND('',#9077,.F.);+#9077=EDGE_LOOP('',(#9078,#6575,#9081,#9082));+#9078=ORIENTED_EDGE('',*,*,#9079,.T.);+#9079=EDGE_CURVE('',#6504,#6571,#9080,.T.);+#9080=LINE('',#6505,#2753);+#9081=ORIENTED_EDGE('',*,*,#9069,.F.);+#9082=ORIENTED_EDGE('',*,*,#6509,.F.);+#9083=PLANE('',#9084);+#9084=AXIS2_PLACEMENT_3D('',#6505,#8994,#6366);+#9085=ADVANCED_FACE('',(#9086),#9093,.F.);+#9086=FACE_BOUND('',#9087,.F.);+#9087=EDGE_LOOP('',(#9088,#6569,#9091,#9092));+#9088=ORIENTED_EDGE('',*,*,#9089,.T.);+#9089=EDGE_CURVE('',#6499,#6566,#9090,.T.);+#9090=LINE('',#6500,#2753);+#9091=ORIENTED_EDGE('',*,*,#9079,.F.);+#9092=ORIENTED_EDGE('',*,*,#6503,.F.);+#9093=CYLINDRICAL_SURFACE('',#6507,1.E-01);+#9094=ADVANCED_FACE('',(#9095),#9102,.F.);+#9095=FACE_BOUND('',#9096,.F.);+#9096=EDGE_LOOP('',(#9097,#6564,#9100,#9101));+#9097=ORIENTED_EDGE('',*,*,#9098,.T.);+#9098=EDGE_CURVE('',#6494,#6561,#9099,.T.);+#9099=LINE('',#6495,#2753);+#9100=ORIENTED_EDGE('',*,*,#9089,.F.);+#9101=ORIENTED_EDGE('',*,*,#6498,.F.);+#9102=PLANE('',#9103);+#9103=AXIS2_PLACEMENT_3D('',#6495,#3066,#4056);+#9104=ADVANCED_FACE('',(#9105),#9112,.F.);+#9105=FACE_BOUND('',#9106,.F.);+#9106=EDGE_LOOP('',(#9107,#6559,#9110,#9111));+#9107=ORIENTED_EDGE('',*,*,#9108,.T.);+#9108=EDGE_CURVE('',#6489,#6556,#9109,.T.);+#9109=LINE('',#6490,#2753);+#9110=ORIENTED_EDGE('',*,*,#9098,.F.);+#9111=ORIENTED_EDGE('',*,*,#6493,.F.);+#9112=PLANE('',#9113);+#9113=AXIS2_PLACEMENT_3D('',#6490,#4056,#13);+#9114=ADVANCED_FACE('',(#9115),#9122,.F.);+#9115=FACE_BOUND('',#9116,.F.);+#9116=EDGE_LOOP('',(#9117,#6554,#9120,#9121));+#9117=ORIENTED_EDGE('',*,*,#9118,.T.);+#9118=EDGE_CURVE('',#6482,#6549,#9119,.T.);+#9119=LINE('',#6483,#2753);+#9120=ORIENTED_EDGE('',*,*,#9108,.F.);+#9121=ORIENTED_EDGE('',*,*,#6488,.F.);+#9122=PLANE('',#9123);+#9123=AXIS2_PLACEMENT_3D('',#6483,#13,#2742);+#9124=ADVANCED_FACE('',(#9125),#9132,.T.);+#9125=FACE_BOUND('',#9126,.F.);+#9126=EDGE_LOOP('',(#9127,#6547,#9130,#9131));+#9127=ORIENTED_EDGE('',*,*,#9128,.T.);+#9128=EDGE_CURVE('',#6477,#6544,#9129,.T.);+#9129=LINE('',#6478,#2753);+#9130=ORIENTED_EDGE('',*,*,#9118,.F.);+#9131=ORIENTED_EDGE('',*,*,#6481,.F.);+#9132=CYLINDRICAL_SURFACE('',#9133,0.2);+#9133=AXIS2_PLACEMENT_3D('',#6486,#6321,#6337);+#9134=ADVANCED_FACE('',(#9135),#9140,.F.);+#9135=FACE_BOUND('',#9136,.F.);+#9136=EDGE_LOOP('',(#9137,#6542,#9138,#9139));+#9137=ORIENTED_EDGE('',*,*,#6535,.T.);+#9138=ORIENTED_EDGE('',*,*,#9128,.F.);+#9139=ORIENTED_EDGE('',*,*,#6476,.F.);+#9140=PLANE('',#9141);+#9141=AXIS2_PLACEMENT_3D('',#6471,#9052,#6329);+#9142=ADVANCED_FACE('',(#9143),#9152,.F.);+#9143=FACE_BOUND('',#9144,.F.);+#9144=EDGE_LOOP('',(#9145,#9146,#6731,#9149,#9150,#9151));+#9145=ORIENTED_EDGE('',*,*,#6664,.F.);+#9146=ORIENTED_EDGE('',*,*,#9147,.T.);+#9147=EDGE_CURVE('',#6660,#6727,#9148,.T.);+#9148=LINE('',#6601,#2753);+#9149=ORIENTED_EDGE('',*,*,#6752,.T.);+#9150=ORIENTED_EDGE('',*,*,#7719,.F.);+#9151=ORIENTED_EDGE('',*,*,#6597,.F.);+#9152=PLANE('',#9153);+#9153=AXIS2_PLACEMENT_3D('',#6601,#3066,#4056);+#9154=ADVANCED_FACE('',(#9155),#9162,.T.);+#9155=FACE_BOUND('',#9156,.F.);+#9156=EDGE_LOOP('',(#9157,#6725,#9160,#9161));+#9157=ORIENTED_EDGE('',*,*,#9158,.T.);+#9158=EDGE_CURVE('',#6655,#6722,#9159,.T.);+#9159=LINE('',#6656,#2753);+#9160=ORIENTED_EDGE('',*,*,#9147,.F.);+#9161=ORIENTED_EDGE('',*,*,#6659,.F.);+#9162=CYLINDRICAL_SURFACE('',#9163,0.2);+#9163=AXIS2_PLACEMENT_3D('',#6619,#6321,#6372);+#9164=ADVANCED_FACE('',(#9165),#9172,.F.);+#9165=FACE_BOUND('',#9166,.F.);+#9166=EDGE_LOOP('',(#9167,#6720,#9170,#9171));+#9167=ORIENTED_EDGE('',*,*,#9168,.T.);+#9168=EDGE_CURVE('',#6649,#6716,#9169,.T.);+#9169=LINE('',#6650,#2753);+#9170=ORIENTED_EDGE('',*,*,#9158,.F.);+#9171=ORIENTED_EDGE('',*,*,#6654,.F.);+#9172=PLANE('',#9173);+#9173=AXIS2_PLACEMENT_3D('',#6650,#8994,#6366);+#9174=ADVANCED_FACE('',(#9175),#9182,.F.);+#9175=FACE_BOUND('',#9176,.F.);+#9176=EDGE_LOOP('',(#9177,#6714,#9180,#9181));+#9177=ORIENTED_EDGE('',*,*,#9178,.T.);+#9178=EDGE_CURVE('',#6644,#6711,#9179,.T.);+#9179=LINE('',#6645,#2753);+#9180=ORIENTED_EDGE('',*,*,#9168,.F.);+#9181=ORIENTED_EDGE('',*,*,#6648,.F.);+#9182=CYLINDRICAL_SURFACE('',#6652,1.E-01);+#9183=ADVANCED_FACE('',(#9184),#9191,.F.);+#9184=FACE_BOUND('',#9185,.F.);+#9185=EDGE_LOOP('',(#9186,#6709,#9189,#9190));+#9186=ORIENTED_EDGE('',*,*,#9187,.T.);+#9187=EDGE_CURVE('',#6639,#6706,#9188,.T.);+#9188=LINE('',#6640,#2753);+#9189=ORIENTED_EDGE('',*,*,#9178,.F.);+#9190=ORIENTED_EDGE('',*,*,#6643,.F.);+#9191=PLANE('',#9192);+#9192=AXIS2_PLACEMENT_3D('',#6640,#3066,#4056);+#9193=ADVANCED_FACE('',(#9194),#9201,.F.);+#9194=FACE_BOUND('',#9195,.F.);+#9195=EDGE_LOOP('',(#9196,#6704,#9199,#9200));+#9196=ORIENTED_EDGE('',*,*,#9197,.T.);+#9197=EDGE_CURVE('',#6634,#6701,#9198,.T.);+#9198=LINE('',#6635,#2753);+#9199=ORIENTED_EDGE('',*,*,#9187,.F.);+#9200=ORIENTED_EDGE('',*,*,#6638,.F.);+#9201=PLANE('',#9202);+#9202=AXIS2_PLACEMENT_3D('',#6635,#4056,#13);+#9203=ADVANCED_FACE('',(#9204),#9211,.F.);+#9204=FACE_BOUND('',#9205,.F.);+#9205=EDGE_LOOP('',(#9206,#6699,#9209,#9210));+#9206=ORIENTED_EDGE('',*,*,#9207,.T.);+#9207=EDGE_CURVE('',#6627,#6694,#9208,.T.);+#9208=LINE('',#6628,#2753);+#9209=ORIENTED_EDGE('',*,*,#9197,.F.);+#9210=ORIENTED_EDGE('',*,*,#6633,.F.);+#9211=PLANE('',#9212);+#9212=AXIS2_PLACEMENT_3D('',#6628,#13,#2742);+#9213=ADVANCED_FACE('',(#9214),#9221,.T.);+#9214=FACE_BOUND('',#9215,.F.);+#9215=EDGE_LOOP('',(#9216,#6692,#9219,#9220));+#9216=ORIENTED_EDGE('',*,*,#9217,.T.);+#9217=EDGE_CURVE('',#6622,#6689,#9218,.T.);+#9218=LINE('',#6623,#2753);+#9219=ORIENTED_EDGE('',*,*,#9207,.F.);+#9220=ORIENTED_EDGE('',*,*,#6626,.F.);+#9221=CYLINDRICAL_SURFACE('',#9222,0.2);+#9222=AXIS2_PLACEMENT_3D('',#6631,#6321,#6337);+#9223=ADVANCED_FACE('',(#9224),#9229,.F.);+#9224=FACE_BOUND('',#9225,.F.);+#9225=EDGE_LOOP('',(#9226,#6687,#9227,#9228));+#9226=ORIENTED_EDGE('',*,*,#6680,.T.);+#9227=ORIENTED_EDGE('',*,*,#9217,.F.);+#9228=ORIENTED_EDGE('',*,*,#6621,.F.);+#9229=PLANE('',#9230);+#9230=AXIS2_PLACEMENT_3D('',#6616,#9052,#6329);+#9231=ADVANCED_FACE('',(#9232),#9241,.F.);+#9232=FACE_BOUND('',#9233,.F.);+#9233=EDGE_LOOP('',(#9234,#9235,#6876,#9238,#9239,#9240));+#9234=ORIENTED_EDGE('',*,*,#6809,.F.);+#9235=ORIENTED_EDGE('',*,*,#9236,.T.);+#9236=EDGE_CURVE('',#6805,#6872,#9237,.T.);+#9237=LINE('',#6746,#2753);+#9238=ORIENTED_EDGE('',*,*,#6897,.T.);+#9239=ORIENTED_EDGE('',*,*,#7722,.F.);+#9240=ORIENTED_EDGE('',*,*,#6742,.F.);+#9241=PLANE('',#9242);+#9242=AXIS2_PLACEMENT_3D('',#6746,#3066,#4056);+#9243=ADVANCED_FACE('',(#9244),#9251,.T.);+#9244=FACE_BOUND('',#9245,.F.);+#9245=EDGE_LOOP('',(#9246,#6870,#9249,#9250));+#9246=ORIENTED_EDGE('',*,*,#9247,.T.);+#9247=EDGE_CURVE('',#6800,#6867,#9248,.T.);+#9248=LINE('',#6801,#2753);+#9249=ORIENTED_EDGE('',*,*,#9236,.F.);+#9250=ORIENTED_EDGE('',*,*,#6804,.F.);+#9251=CYLINDRICAL_SURFACE('',#9252,0.2);+#9252=AXIS2_PLACEMENT_3D('',#6764,#6321,#6372);+#9253=ADVANCED_FACE('',(#9254),#9261,.F.);+#9254=FACE_BOUND('',#9255,.F.);+#9255=EDGE_LOOP('',(#9256,#6865,#9259,#9260));+#9256=ORIENTED_EDGE('',*,*,#9257,.T.);+#9257=EDGE_CURVE('',#6794,#6861,#9258,.T.);+#9258=LINE('',#6795,#2753);+#9259=ORIENTED_EDGE('',*,*,#9247,.F.);+#9260=ORIENTED_EDGE('',*,*,#6799,.F.);+#9261=PLANE('',#9262);+#9262=AXIS2_PLACEMENT_3D('',#6795,#8994,#6366);+#9263=ADVANCED_FACE('',(#9264),#9271,.F.);+#9264=FACE_BOUND('',#9265,.F.);+#9265=EDGE_LOOP('',(#9266,#6859,#9269,#9270));+#9266=ORIENTED_EDGE('',*,*,#9267,.T.);+#9267=EDGE_CURVE('',#6789,#6856,#9268,.T.);+#9268=LINE('',#6790,#2753);+#9269=ORIENTED_EDGE('',*,*,#9257,.F.);+#9270=ORIENTED_EDGE('',*,*,#6793,.F.);+#9271=CYLINDRICAL_SURFACE('',#6797,1.E-01);+#9272=ADVANCED_FACE('',(#9273),#9280,.F.);+#9273=FACE_BOUND('',#9274,.F.);+#9274=EDGE_LOOP('',(#9275,#6854,#9278,#9279));+#9275=ORIENTED_EDGE('',*,*,#9276,.T.);+#9276=EDGE_CURVE('',#6784,#6851,#9277,.T.);+#9277=LINE('',#6785,#2753);+#9278=ORIENTED_EDGE('',*,*,#9267,.F.);+#9279=ORIENTED_EDGE('',*,*,#6788,.F.);+#9280=PLANE('',#9281);+#9281=AXIS2_PLACEMENT_3D('',#6785,#3066,#4056);+#9282=ADVANCED_FACE('',(#9283),#9290,.F.);+#9283=FACE_BOUND('',#9284,.F.);+#9284=EDGE_LOOP('',(#9285,#6849,#9288,#9289));+#9285=ORIENTED_EDGE('',*,*,#9286,.T.);+#9286=EDGE_CURVE('',#6779,#6846,#9287,.T.);+#9287=LINE('',#6780,#2753);+#9288=ORIENTED_EDGE('',*,*,#9276,.F.);+#9289=ORIENTED_EDGE('',*,*,#6783,.F.);+#9290=PLANE('',#9291);+#9291=AXIS2_PLACEMENT_3D('',#6780,#4056,#13);+#9292=ADVANCED_FACE('',(#9293),#9300,.F.);+#9293=FACE_BOUND('',#9294,.F.);+#9294=EDGE_LOOP('',(#9295,#6844,#9298,#9299));+#9295=ORIENTED_EDGE('',*,*,#9296,.T.);+#9296=EDGE_CURVE('',#6772,#6839,#9297,.T.);+#9297=LINE('',#6773,#2753);+#9298=ORIENTED_EDGE('',*,*,#9286,.F.);+#9299=ORIENTED_EDGE('',*,*,#6778,.F.);+#9300=PLANE('',#9301);+#9301=AXIS2_PLACEMENT_3D('',#6773,#13,#2742);+#9302=ADVANCED_FACE('',(#9303),#9310,.T.);+#9303=FACE_BOUND('',#9304,.F.);+#9304=EDGE_LOOP('',(#9305,#6837,#9308,#9309));+#9305=ORIENTED_EDGE('',*,*,#9306,.T.);+#9306=EDGE_CURVE('',#6767,#6834,#9307,.T.);+#9307=LINE('',#6768,#2753);+#9308=ORIENTED_EDGE('',*,*,#9296,.F.);+#9309=ORIENTED_EDGE('',*,*,#6771,.F.);+#9310=CYLINDRICAL_SURFACE('',#9311,0.2);+#9311=AXIS2_PLACEMENT_3D('',#6776,#6321,#6337);+#9312=ADVANCED_FACE('',(#9313),#9318,.F.);+#9313=FACE_BOUND('',#9314,.F.);+#9314=EDGE_LOOP('',(#9315,#6832,#9316,#9317));+#9315=ORIENTED_EDGE('',*,*,#6825,.T.);+#9316=ORIENTED_EDGE('',*,*,#9306,.F.);+#9317=ORIENTED_EDGE('',*,*,#6766,.F.);+#9318=PLANE('',#9319);+#9319=AXIS2_PLACEMENT_3D('',#6761,#9052,#6329);+#9320=ADVANCED_FACE('',(#9321),#9330,.F.);+#9321=FACE_BOUND('',#9322,.F.);+#9322=EDGE_LOOP('',(#9323,#9324,#7021,#9327,#9328,#9329));+#9323=ORIENTED_EDGE('',*,*,#6954,.F.);+#9324=ORIENTED_EDGE('',*,*,#9325,.T.);+#9325=EDGE_CURVE('',#6950,#7017,#9326,.T.);+#9326=LINE('',#6891,#2753);+#9327=ORIENTED_EDGE('',*,*,#7042,.T.);+#9328=ORIENTED_EDGE('',*,*,#7725,.F.);+#9329=ORIENTED_EDGE('',*,*,#6887,.F.);+#9330=PLANE('',#9331);+#9331=AXIS2_PLACEMENT_3D('',#6891,#3066,#4056);+#9332=ADVANCED_FACE('',(#9333),#9340,.T.);+#9333=FACE_BOUND('',#9334,.F.);+#9334=EDGE_LOOP('',(#9335,#7015,#9338,#9339));+#9335=ORIENTED_EDGE('',*,*,#9336,.T.);+#9336=EDGE_CURVE('',#6945,#7012,#9337,.T.);+#9337=LINE('',#6946,#2753);+#9338=ORIENTED_EDGE('',*,*,#9325,.F.);+#9339=ORIENTED_EDGE('',*,*,#6949,.F.);+#9340=CYLINDRICAL_SURFACE('',#9341,0.2);+#9341=AXIS2_PLACEMENT_3D('',#6909,#6321,#6372);+#9342=ADVANCED_FACE('',(#9343),#9350,.F.);+#9343=FACE_BOUND('',#9344,.F.);+#9344=EDGE_LOOP('',(#9345,#7010,#9348,#9349));+#9345=ORIENTED_EDGE('',*,*,#9346,.T.);+#9346=EDGE_CURVE('',#6939,#7006,#9347,.T.);+#9347=LINE('',#6940,#2753);+#9348=ORIENTED_EDGE('',*,*,#9336,.F.);+#9349=ORIENTED_EDGE('',*,*,#6944,.F.);+#9350=PLANE('',#9351);+#9351=AXIS2_PLACEMENT_3D('',#6940,#8994,#6366);+#9352=ADVANCED_FACE('',(#9353),#9360,.F.);+#9353=FACE_BOUND('',#9354,.F.);+#9354=EDGE_LOOP('',(#9355,#7004,#9358,#9359));+#9355=ORIENTED_EDGE('',*,*,#9356,.T.);+#9356=EDGE_CURVE('',#6934,#7001,#9357,.T.);+#9357=LINE('',#6935,#2753);+#9358=ORIENTED_EDGE('',*,*,#9346,.F.);+#9359=ORIENTED_EDGE('',*,*,#6938,.F.);+#9360=CYLINDRICAL_SURFACE('',#6942,1.E-01);+#9361=ADVANCED_FACE('',(#9362),#9369,.F.);+#9362=FACE_BOUND('',#9363,.F.);+#9363=EDGE_LOOP('',(#9364,#6999,#9367,#9368));+#9364=ORIENTED_EDGE('',*,*,#9365,.T.);+#9365=EDGE_CURVE('',#6929,#6996,#9366,.T.);+#9366=LINE('',#6930,#2753);+#9367=ORIENTED_EDGE('',*,*,#9356,.F.);+#9368=ORIENTED_EDGE('',*,*,#6933,.F.);+#9369=PLANE('',#9370);+#9370=AXIS2_PLACEMENT_3D('',#6930,#3066,#4056);+#9371=ADVANCED_FACE('',(#9372),#9379,.F.);+#9372=FACE_BOUND('',#9373,.F.);+#9373=EDGE_LOOP('',(#9374,#6994,#9377,#9378));+#9374=ORIENTED_EDGE('',*,*,#9375,.T.);+#9375=EDGE_CURVE('',#6924,#6991,#9376,.T.);+#9376=LINE('',#6925,#2753);+#9377=ORIENTED_EDGE('',*,*,#9365,.F.);+#9378=ORIENTED_EDGE('',*,*,#6928,.F.);+#9379=PLANE('',#9380);+#9380=AXIS2_PLACEMENT_3D('',#6925,#4056,#13);+#9381=ADVANCED_FACE('',(#9382),#9389,.F.);+#9382=FACE_BOUND('',#9383,.F.);+#9383=EDGE_LOOP('',(#9384,#6989,#9387,#9388));+#9384=ORIENTED_EDGE('',*,*,#9385,.T.);+#9385=EDGE_CURVE('',#6917,#6984,#9386,.T.);+#9386=LINE('',#6918,#2753);+#9387=ORIENTED_EDGE('',*,*,#9375,.F.);+#9388=ORIENTED_EDGE('',*,*,#6923,.F.);+#9389=PLANE('',#9390);+#9390=AXIS2_PLACEMENT_3D('',#6918,#13,#2742);+#9391=ADVANCED_FACE('',(#9392),#9399,.T.);+#9392=FACE_BOUND('',#9393,.F.);+#9393=EDGE_LOOP('',(#9394,#6982,#9397,#9398));+#9394=ORIENTED_EDGE('',*,*,#9395,.T.);+#9395=EDGE_CURVE('',#6912,#6979,#9396,.T.);+#9396=LINE('',#6913,#2753);+#9397=ORIENTED_EDGE('',*,*,#9385,.F.);+#9398=ORIENTED_EDGE('',*,*,#6916,.F.);+#9399=CYLINDRICAL_SURFACE('',#9400,0.2);+#9400=AXIS2_PLACEMENT_3D('',#6921,#6321,#6337);+#9401=ADVANCED_FACE('',(#9402),#9407,.F.);+#9402=FACE_BOUND('',#9403,.F.);+#9403=EDGE_LOOP('',(#9404,#6977,#9405,#9406));+#9404=ORIENTED_EDGE('',*,*,#6970,.T.);+#9405=ORIENTED_EDGE('',*,*,#9395,.F.);+#9406=ORIENTED_EDGE('',*,*,#6911,.F.);+#9407=PLANE('',#9408);+#9408=AXIS2_PLACEMENT_3D('',#6906,#9052,#6329);+#9409=ADVANCED_FACE('',(#9410),#9419,.F.);+#9410=FACE_BOUND('',#9411,.F.);+#9411=EDGE_LOOP('',(#9412,#9413,#7166,#9416,#9417,#9418));+#9412=ORIENTED_EDGE('',*,*,#7099,.F.);+#9413=ORIENTED_EDGE('',*,*,#9414,.T.);+#9414=EDGE_CURVE('',#7095,#7162,#9415,.T.);+#9415=LINE('',#7036,#2753);+#9416=ORIENTED_EDGE('',*,*,#7187,.T.);+#9417=ORIENTED_EDGE('',*,*,#7728,.F.);+#9418=ORIENTED_EDGE('',*,*,#7032,.F.);+#9419=PLANE('',#9420);+#9420=AXIS2_PLACEMENT_3D('',#7036,#3066,#4056);+#9421=ADVANCED_FACE('',(#9422),#9429,.T.);+#9422=FACE_BOUND('',#9423,.F.);+#9423=EDGE_LOOP('',(#9424,#7160,#9427,#9428));+#9424=ORIENTED_EDGE('',*,*,#9425,.T.);+#9425=EDGE_CURVE('',#7090,#7157,#9426,.T.);+#9426=LINE('',#7091,#2753);+#9427=ORIENTED_EDGE('',*,*,#9414,.F.);+#9428=ORIENTED_EDGE('',*,*,#7094,.F.);+#9429=CYLINDRICAL_SURFACE('',#9430,0.2);+#9430=AXIS2_PLACEMENT_3D('',#7054,#6321,#6372);+#9431=ADVANCED_FACE('',(#9432),#9439,.F.);+#9432=FACE_BOUND('',#9433,.F.);+#9433=EDGE_LOOP('',(#9434,#7155,#9437,#9438));+#9434=ORIENTED_EDGE('',*,*,#9435,.T.);+#9435=EDGE_CURVE('',#7084,#7151,#9436,.T.);+#9436=LINE('',#7085,#2753);+#9437=ORIENTED_EDGE('',*,*,#9425,.F.);+#9438=ORIENTED_EDGE('',*,*,#7089,.F.);+#9439=PLANE('',#9440);+#9440=AXIS2_PLACEMENT_3D('',#7085,#8994,#6366);+#9441=ADVANCED_FACE('',(#9442),#9449,.F.);+#9442=FACE_BOUND('',#9443,.F.);+#9443=EDGE_LOOP('',(#9444,#7149,#9447,#9448));+#9444=ORIENTED_EDGE('',*,*,#9445,.T.);+#9445=EDGE_CURVE('',#7079,#7146,#9446,.T.);+#9446=LINE('',#7080,#2753);+#9447=ORIENTED_EDGE('',*,*,#9435,.F.);+#9448=ORIENTED_EDGE('',*,*,#7083,.F.);+#9449=CYLINDRICAL_SURFACE('',#7087,1.E-01);+#9450=ADVANCED_FACE('',(#9451),#9458,.F.);+#9451=FACE_BOUND('',#9452,.F.);+#9452=EDGE_LOOP('',(#9453,#7144,#9456,#9457));+#9453=ORIENTED_EDGE('',*,*,#9454,.T.);+#9454=EDGE_CURVE('',#7074,#7141,#9455,.T.);+#9455=LINE('',#7075,#2753);+#9456=ORIENTED_EDGE('',*,*,#9445,.F.);+#9457=ORIENTED_EDGE('',*,*,#7078,.F.);+#9458=PLANE('',#9459);+#9459=AXIS2_PLACEMENT_3D('',#7075,#3066,#4056);+#9460=ADVANCED_FACE('',(#9461),#9468,.F.);+#9461=FACE_BOUND('',#9462,.F.);+#9462=EDGE_LOOP('',(#9463,#7139,#9466,#9467));+#9463=ORIENTED_EDGE('',*,*,#9464,.T.);+#9464=EDGE_CURVE('',#7069,#7136,#9465,.T.);+#9465=LINE('',#7070,#2753);+#9466=ORIENTED_EDGE('',*,*,#9454,.F.);+#9467=ORIENTED_EDGE('',*,*,#7073,.F.);+#9468=PLANE('',#9469);+#9469=AXIS2_PLACEMENT_3D('',#7070,#4056,#13);+#9470=ADVANCED_FACE('',(#9471),#9478,.F.);+#9471=FACE_BOUND('',#9472,.F.);+#9472=EDGE_LOOP('',(#9473,#7134,#9476,#9477));+#9473=ORIENTED_EDGE('',*,*,#9474,.T.);+#9474=EDGE_CURVE('',#7062,#7129,#9475,.T.);+#9475=LINE('',#7063,#2753);+#9476=ORIENTED_EDGE('',*,*,#9464,.F.);+#9477=ORIENTED_EDGE('',*,*,#7068,.F.);+#9478=PLANE('',#9479);+#9479=AXIS2_PLACEMENT_3D('',#7063,#13,#2742);+#9480=ADVANCED_FACE('',(#9481),#9488,.T.);+#9481=FACE_BOUND('',#9482,.F.);+#9482=EDGE_LOOP('',(#9483,#7127,#9486,#9487));+#9483=ORIENTED_EDGE('',*,*,#9484,.T.);+#9484=EDGE_CURVE('',#7057,#7124,#9485,.T.);+#9485=LINE('',#7058,#2753);+#9486=ORIENTED_EDGE('',*,*,#9474,.F.);+#9487=ORIENTED_EDGE('',*,*,#7061,.F.);+#9488=CYLINDRICAL_SURFACE('',#9489,0.2);+#9489=AXIS2_PLACEMENT_3D('',#7066,#6321,#6337);+#9490=ADVANCED_FACE('',(#9491),#9496,.F.);+#9491=FACE_BOUND('',#9492,.F.);+#9492=EDGE_LOOP('',(#9493,#7122,#9494,#9495));+#9493=ORIENTED_EDGE('',*,*,#7115,.T.);+#9494=ORIENTED_EDGE('',*,*,#9484,.F.);+#9495=ORIENTED_EDGE('',*,*,#7056,.F.);+#9496=PLANE('',#9497);+#9497=AXIS2_PLACEMENT_3D('',#7051,#9052,#6329);+#9498=ADVANCED_FACE('',(#9499),#9508,.F.);+#9499=FACE_BOUND('',#9500,.F.);+#9500=EDGE_LOOP('',(#9501,#9502,#7311,#9505,#9506,#9507));+#9501=ORIENTED_EDGE('',*,*,#7244,.F.);+#9502=ORIENTED_EDGE('',*,*,#9503,.T.);+#9503=EDGE_CURVE('',#7240,#7307,#9504,.T.);+#9504=LINE('',#7181,#2753);+#9505=ORIENTED_EDGE('',*,*,#7332,.T.);+#9506=ORIENTED_EDGE('',*,*,#7731,.F.);+#9507=ORIENTED_EDGE('',*,*,#7177,.F.);+#9508=PLANE('',#9509);+#9509=AXIS2_PLACEMENT_3D('',#7181,#3066,#4056);+#9510=ADVANCED_FACE('',(#9511),#9518,.T.);+#9511=FACE_BOUND('',#9512,.F.);+#9512=EDGE_LOOP('',(#9513,#7305,#9516,#9517));+#9513=ORIENTED_EDGE('',*,*,#9514,.T.);+#9514=EDGE_CURVE('',#7235,#7302,#9515,.T.);+#9515=LINE('',#7236,#2753);+#9516=ORIENTED_EDGE('',*,*,#9503,.F.);+#9517=ORIENTED_EDGE('',*,*,#7239,.F.);+#9518=CYLINDRICAL_SURFACE('',#9519,0.2);+#9519=AXIS2_PLACEMENT_3D('',#7199,#6321,#6372);+#9520=ADVANCED_FACE('',(#9521),#9528,.F.);+#9521=FACE_BOUND('',#9522,.F.);+#9522=EDGE_LOOP('',(#9523,#7300,#9526,#9527));+#9523=ORIENTED_EDGE('',*,*,#9524,.T.);+#9524=EDGE_CURVE('',#7229,#7296,#9525,.T.);+#9525=LINE('',#7230,#2753);+#9526=ORIENTED_EDGE('',*,*,#9514,.F.);+#9527=ORIENTED_EDGE('',*,*,#7234,.F.);+#9528=PLANE('',#9529);+#9529=AXIS2_PLACEMENT_3D('',#7230,#8994,#6366);+#9530=ADVANCED_FACE('',(#9531),#9538,.F.);+#9531=FACE_BOUND('',#9532,.F.);+#9532=EDGE_LOOP('',(#9533,#7294,#9536,#9537));+#9533=ORIENTED_EDGE('',*,*,#9534,.T.);+#9534=EDGE_CURVE('',#7224,#7291,#9535,.T.);+#9535=LINE('',#7225,#2753);+#9536=ORIENTED_EDGE('',*,*,#9524,.F.);+#9537=ORIENTED_EDGE('',*,*,#7228,.F.);+#9538=CYLINDRICAL_SURFACE('',#7232,1.E-01);+#9539=ADVANCED_FACE('',(#9540),#9547,.F.);+#9540=FACE_BOUND('',#9541,.F.);+#9541=EDGE_LOOP('',(#9542,#7289,#9545,#9546));+#9542=ORIENTED_EDGE('',*,*,#9543,.T.);+#9543=EDGE_CURVE('',#7219,#7286,#9544,.T.);+#9544=LINE('',#7220,#2753);+#9545=ORIENTED_EDGE('',*,*,#9534,.F.);+#9546=ORIENTED_EDGE('',*,*,#7223,.F.);+#9547=PLANE('',#9548);+#9548=AXIS2_PLACEMENT_3D('',#7220,#3066,#4056);+#9549=ADVANCED_FACE('',(#9550),#9557,.F.);+#9550=FACE_BOUND('',#9551,.F.);+#9551=EDGE_LOOP('',(#9552,#7284,#9555,#9556));+#9552=ORIENTED_EDGE('',*,*,#9553,.T.);+#9553=EDGE_CURVE('',#7214,#7281,#9554,.T.);+#9554=LINE('',#7215,#2753);+#9555=ORIENTED_EDGE('',*,*,#9543,.F.);+#9556=ORIENTED_EDGE('',*,*,#7218,.F.);+#9557=PLANE('',#9558);+#9558=AXIS2_PLACEMENT_3D('',#7215,#4056,#13);+#9559=ADVANCED_FACE('',(#9560),#9567,.F.);+#9560=FACE_BOUND('',#9561,.F.);+#9561=EDGE_LOOP('',(#9562,#7279,#9565,#9566));+#9562=ORIENTED_EDGE('',*,*,#9563,.T.);+#9563=EDGE_CURVE('',#7207,#7274,#9564,.T.);+#9564=LINE('',#7208,#2753);+#9565=ORIENTED_EDGE('',*,*,#9553,.F.);+#9566=ORIENTED_EDGE('',*,*,#7213,.F.);+#9567=PLANE('',#9568);+#9568=AXIS2_PLACEMENT_3D('',#7208,#13,#2742);+#9569=ADVANCED_FACE('',(#9570),#9577,.T.);+#9570=FACE_BOUND('',#9571,.F.);+#9571=EDGE_LOOP('',(#9572,#7272,#9575,#9576));+#9572=ORIENTED_EDGE('',*,*,#9573,.T.);+#9573=EDGE_CURVE('',#7202,#7269,#9574,.T.);+#9574=LINE('',#7203,#2753);+#9575=ORIENTED_EDGE('',*,*,#9563,.F.);+#9576=ORIENTED_EDGE('',*,*,#7206,.F.);+#9577=CYLINDRICAL_SURFACE('',#9578,0.2);+#9578=AXIS2_PLACEMENT_3D('',#7211,#6321,#6337);+#9579=ADVANCED_FACE('',(#9580),#9585,.F.);+#9580=FACE_BOUND('',#9581,.F.);+#9581=EDGE_LOOP('',(#9582,#7267,#9583,#9584));+#9582=ORIENTED_EDGE('',*,*,#7260,.T.);+#9583=ORIENTED_EDGE('',*,*,#9573,.F.);+#9584=ORIENTED_EDGE('',*,*,#7201,.F.);+#9585=PLANE('',#9586);+#9586=AXIS2_PLACEMENT_3D('',#7196,#9052,#6329);+#9587=ADVANCED_FACE('',(#9588),#9595,.T.);+#9588=FACE_BOUND('',#9589,.F.);+#9589=EDGE_LOOP('',(#9590,#7450,#9593,#9594));+#9590=ORIENTED_EDGE('',*,*,#9591,.T.);+#9591=EDGE_CURVE('',#7380,#7447,#9592,.T.);+#9592=LINE('',#7381,#2753);+#9593=ORIENTED_EDGE('',*,*,#7700,.F.);+#9594=ORIENTED_EDGE('',*,*,#7384,.F.);+#9595=CYLINDRICAL_SURFACE('',#9596,0.2);+#9596=AXIS2_PLACEMENT_3D('',#7344,#6321,#6372);+#9597=ADVANCED_FACE('',(#9598),#9605,.F.);+#9598=FACE_BOUND('',#9599,.F.);+#9599=EDGE_LOOP('',(#9600,#7445,#9603,#9604));+#9600=ORIENTED_EDGE('',*,*,#9601,.T.);+#9601=EDGE_CURVE('',#7374,#7441,#9602,.T.);+#9602=LINE('',#7375,#2753);+#9603=ORIENTED_EDGE('',*,*,#9591,.F.);+#9604=ORIENTED_EDGE('',*,*,#7379,.F.);+#9605=PLANE('',#9606);+#9606=AXIS2_PLACEMENT_3D('',#7375,#8994,#6366);+#9607=ADVANCED_FACE('',(#9608),#9615,.F.);+#9608=FACE_BOUND('',#9609,.F.);+#9609=EDGE_LOOP('',(#9610,#7439,#9613,#9614));+#9610=ORIENTED_EDGE('',*,*,#9611,.T.);+#9611=EDGE_CURVE('',#7369,#7436,#9612,.T.);+#9612=LINE('',#7370,#2753);+#9613=ORIENTED_EDGE('',*,*,#9601,.F.);+#9614=ORIENTED_EDGE('',*,*,#7373,.F.);+#9615=CYLINDRICAL_SURFACE('',#7377,1.E-01);+#9616=ADVANCED_FACE('',(#9617),#9624,.F.);+#9617=FACE_BOUND('',#9618,.F.);+#9618=EDGE_LOOP('',(#9619,#7434,#9622,#9623));+#9619=ORIENTED_EDGE('',*,*,#9620,.T.);+#9620=EDGE_CURVE('',#7364,#7431,#9621,.T.);+#9621=LINE('',#7365,#2753);+#9622=ORIENTED_EDGE('',*,*,#9611,.F.);+#9623=ORIENTED_EDGE('',*,*,#7368,.F.);+#9624=PLANE('',#9625);+#9625=AXIS2_PLACEMENT_3D('',#7365,#3066,#4056);+#9626=ADVANCED_FACE('',(#9627),#9634,.F.);+#9627=FACE_BOUND('',#9628,.F.);+#9628=EDGE_LOOP('',(#9629,#7429,#9632,#9633));+#9629=ORIENTED_EDGE('',*,*,#9630,.T.);+#9630=EDGE_CURVE('',#7359,#7426,#9631,.T.);+#9631=LINE('',#7360,#2753);+#9632=ORIENTED_EDGE('',*,*,#9620,.F.);+#9633=ORIENTED_EDGE('',*,*,#7363,.F.);+#9634=PLANE('',#9635);+#9635=AXIS2_PLACEMENT_3D('',#7360,#4056,#13);+#9636=ADVANCED_FACE('',(#9637),#9644,.F.);+#9637=FACE_BOUND('',#9638,.F.);+#9638=EDGE_LOOP('',(#9639,#7424,#9642,#9643));+#9639=ORIENTED_EDGE('',*,*,#9640,.T.);+#9640=EDGE_CURVE('',#7352,#7419,#9641,.T.);+#9641=LINE('',#7353,#2753);+#9642=ORIENTED_EDGE('',*,*,#9630,.F.);+#9643=ORIENTED_EDGE('',*,*,#7358,.F.);+#9644=PLANE('',#9645);+#9645=AXIS2_PLACEMENT_3D('',#7353,#13,#2742);+#9646=ADVANCED_FACE('',(#9647),#9654,.T.);+#9647=FACE_BOUND('',#9648,.F.);+#9648=EDGE_LOOP('',(#9649,#7417,#9652,#9653));+#9649=ORIENTED_EDGE('',*,*,#9650,.T.);+#9650=EDGE_CURVE('',#7347,#7414,#9651,.T.);+#9651=LINE('',#7348,#2753);+#9652=ORIENTED_EDGE('',*,*,#9640,.F.);+#9653=ORIENTED_EDGE('',*,*,#7351,.F.);+#9654=CYLINDRICAL_SURFACE('',#9655,0.2);+#9655=AXIS2_PLACEMENT_3D('',#7356,#6321,#6337);+#9656=ADVANCED_FACE('',(#9657),#9662,.F.);+#9657=FACE_BOUND('',#9658,.F.);+#9658=EDGE_LOOP('',(#9659,#7412,#9660,#9661));+#9659=ORIENTED_EDGE('',*,*,#7405,.T.);+#9660=ORIENTED_EDGE('',*,*,#9650,.F.);+#9661=ORIENTED_EDGE('',*,*,#7346,.F.);+#9662=PLANE('',#9663);+#9663=AXIS2_PLACEMENT_3D('',#7341,#9052,#6329);+#9664=ADVANCED_FACE('',(#9665),#9668,.F.);+#9665=FACE_BOUND('',#9666,.T.);+#9666=EDGE_LOOP('',(#9667));+#9667=ORIENTED_EDGE('',*,*,#7573,.F.);+#9668=PLANE('',#9669);+#9669=AXIS2_PLACEMENT_3D('',#7578,#3066,#123);+#9670=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#9674)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#9671,#9672,#9673)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#9671=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#9672=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#9673=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#9674=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#9671,'distance_accuracy_value','confusion accuracy');+#9675=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#9676=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#9677,#9687,#9688,#9689,#9690,#9699,#9700,#9701,#9702,#9703,#9704,#9705,#9706,#9707,#9708,#9709,#9710,#9711,#9712,#9713,#9714,#9715,#9716,#9717,#9718,#9719,#9720,#9721,#9722,#9723,#9724,#9725,#9726,#9727,#9728,#9729,#9730,#9731,#9732,#9733,#9734,#9735,#9736,#9737,#9738,#9739,#9740,#9741,#9742,#9743,#9744,#9745,#9746,#9747,#9748,#9749,#9750,#9751,#9752,#9753,#9754,#9755,#9756,#9757,#9758,#9759,#9760,#9761,#9762,#9763,#9764,#9765,#9766,#9767,#9768,#9769,#9770,#9771,#9772,#9773,#9774,#9775,#9776,#9777,#9778,#9779,#9780,#9781,#9782,#9783,#9784,#9785,#9786,#9787,#9788,#9789,#9790,#9791,#9792,#9793,#9794,#9795,#9796,#9797,#9798,#9799,#9800,#9801,#9802,#9803,#9804,#9805,#9806,#9807,#9808,#9809,#9810,#9811,#9812,#9813,#9814,#9815,#9816,#9817,#9818,#9819,#9820,#9821,#9822,#9823,#9824,#9825,#9826,#9827,#9828,#9829,#9830,#9831,#9832,#9833,#9834,#9835,#9836,#9837,#9838,#9839,#9840,#9841,#9842,#9843,#9844,#9845,#9846,#9847,#9848,#9849,#9850,#9851,#9852,#9853,#9854,#9855,#9856,#9857,#9858,#9859,#9860,#9861,#9862,#9863,#9864,#9865,#9866,#9867,#9868,#9869,#9870,#9871,#9872,#9873,#9874,#9875,#9876,#9877,#9878,#9879,#9880,#9881,#9882,#9883,#9884,#9885,#9886,#9887,#9888,#9889,#9890,#9891,#9892,#9893,#9894,#9895,#9896,#9897,#9898,#9899,#9900,#9901,#9902,#9903,#9904,#9905,#9906,#9907,#9908,#9909,#9910,#9911,#9912,#9913,#9914,#9915,#9916,#9917,#9918,#9919,#9920,#9921,#9922,#9923,#9924,#9925,#9926,#9927,#9928,#9929,#9930,#9931,#9932,#9933,#9934,#9935,#9936,#9937,#9938,#9939,#9940,#9941,#9942,#9943,#9944,#9945,#9946,#9947,#9948,#9949,#9950,#9951,#9952,#9953,#9954,#9955,#9956,#9957,#9958,#9959,#9960,#9961,#9962,#9963,#9964,#9965,#9966,#9967,#9968,#9969,#9970,#9971,#9972,#9973,#9974,#9975,#9976,#9977,#9978,#9979,#9980,#9981,#9982,#9983,#9984,#9985,#9986,#9987,#9988,#9989,#9990,#9991,#9992,#9993,#9994,#9995,#9996,#9997,#9998,#9999,#10000,#10001,#10002,#10003,#10004,#10005,#10006,#10007,#10008,#10009,#10010,#10011,#10012,#10013,#10014,#10015,#10016,#10017,#10018,#10019,#10020,#10021,#10022,#10023,#10024,#10025,#10026,#10027,#10028,#10029,#10030,#10031,#10032,#10033,#10034,#10035,#10036,#10037,#10038,#10039,#10040,#10041,#10042,#10043,#10044,#10045,#10046,#10047,#10048,#10049,#10050,#10051,#10052,#10053,#10054,#10055,#10056,#10057,#10058,#10059,#10060,#10061,#10062,#10063,#10064,#10065,#10066,#10067,#10068,#10069,#10070,#10071,#10072,#10073,#10074,#10075,#10076,#10077,#10078,#10079,#10080,#10081,#10082,#10083,#10084,#10085,#10086,#10087,#10088,#10089,#10090,#10091,#10092,#10093,#10094,#10095,#10096,#10097,#10098,#10099,#10100,#10101,#10102,#10103,#10104,#10105,#10106,#10107,#10108,#10109,#10110,#10111,#10112,#10113,#10114,#10115,#10116,#10117,#10118,#10119,#10120,#10121,#10122,#10123,#10124,#10125,#10126,#10127,#10128,#10129,#10130,#10131,#10132,#10133,#10134,#10135,#10136,#10137,#10138,#10139,#10140,#10141,#10142,#10143,#10144,#10145,#10146,#10147,#10148,#10149,#10150,#10151,#10152,#10153,#10154,#10155,#10156,#10157,#10158,#10159,#10160,#10161,#10162,#10163,#10164,#10165,#10166,#10167,#10168,#10169,#10170,#10171,#10172,#10173,#10174,#10175,#10176,#10177,#10178,#10179,#10180,#10181,#10182,#10183,#10184,#10185,#10186,#10187,#10188,#10189,#10190,#10191,#10192,#10193,#10194,#10195,#10196,#10197,#10198,#10199,#10200),#9670);+#9677=STYLED_ITEM('color',(#9678),#17);+#9678=PRESENTATION_STYLE_ASSIGNMENT((#9679,#9685));+#9679=SURFACE_STYLE_USAGE(.BOTH.,#9680);+#9680=SURFACE_SIDE_STYLE('',(#9681));+#9681=SURFACE_STYLE_FILL_AREA(#9682);+#9682=FILL_AREA_STYLE('',(#9683));+#9683=FILL_AREA_STYLE_COLOUR('',#9684);+#9684=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#9685=CURVE_STYLE('',#9686,POSITIVE_LENGTH_MEASURE(0.1),#9684);+#9686=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#9687=STYLED_ITEM('color',(#9678),#107);+#9688=STYLED_ITEM('color',(#9678),#160);+#9689=STYLED_ITEM('color',(#9678),#173);+#9690=STYLED_ITEM('color',(#9691),#194);+#9691=PRESENTATION_STYLE_ASSIGNMENT((#9692,#9698));+#9692=SURFACE_STYLE_USAGE(.BOTH.,#9693);+#9693=SURFACE_SIDE_STYLE('',(#9694));+#9694=SURFACE_STYLE_FILL_AREA(#9695);+#9695=FILL_AREA_STYLE('',(#9696));+#9696=FILL_AREA_STYLE_COLOUR('',#9697);+#9697=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#9698=CURVE_STYLE('',#9686,POSITIVE_LENGTH_MEASURE(0.1),#9697);+#9699=STYLED_ITEM('color',(#9678),#219);+#9700=STYLED_ITEM('color',(#9691),#237);+#9701=STYLED_ITEM('color',(#9678),#258);+#9702=STYLED_ITEM('color',(#9691),#276);+#9703=STYLED_ITEM('color',(#9678),#297);+#9704=STYLED_ITEM('color',(#9691),#315);+#9705=STYLED_ITEM('color',(#9678),#336);+#9706=STYLED_ITEM('color',(#9691),#354);+#9707=STYLED_ITEM('color',(#9678),#375);+#9708=STYLED_ITEM('color',(#9691),#393);+#9709=STYLED_ITEM('color',(#9678),#414);+#9710=STYLED_ITEM('color',(#9691),#432);+#9711=STYLED_ITEM('color',(#9678),#453);+#9712=STYLED_ITEM('color',(#9691),#471);+#9713=STYLED_ITEM('color',(#9678),#492);+#9714=STYLED_ITEM('color',(#9678),#509);+#9715=STYLED_ITEM('color',(#9678),#522);+#9716=STYLED_ITEM('color',(#9678),#599);+#9717=STYLED_ITEM('color',(#9678),#676);+#9718=STYLED_ITEM('color',(#9678),#689);+#9719=STYLED_ITEM('color',(#9678),#702);+#9720=STYLED_ITEM('color',(#9678),#775);+#9721=STYLED_ITEM('color',(#9678),#790);+#9722=STYLED_ITEM('color',(#9678),#805);+#9723=STYLED_ITEM('color',(#9691),#851);+#9724=STYLED_ITEM('color',(#9691),#921);+#9725=STYLED_ITEM('color',(#9691),#937);+#9726=STYLED_ITEM('color',(#9678),#990);+#9727=STYLED_ITEM('color',(#9691),#1006);+#9728=STYLED_ITEM('color',(#9691),#1066);+#9729=STYLED_ITEM('color',(#9691),#1082);+#9730=STYLED_ITEM('color',(#9678),#1135);+#9731=STYLED_ITEM('color',(#9691),#1151);+#9732=STYLED_ITEM('color',(#9691),#1211);+#9733=STYLED_ITEM('color',(#9691),#1227);+#9734=STYLED_ITEM('color',(#9678),#1280);+#9735=STYLED_ITEM('color',(#9691),#1296);+#9736=STYLED_ITEM('color',(#9691),#1356);+#9737=STYLED_ITEM('color',(#9691),#1372);+#9738=STYLED_ITEM('color',(#9678),#1425);+#9739=STYLED_ITEM('color',(#9691),#1441);+#9740=STYLED_ITEM('color',(#9691),#1501);+#9741=STYLED_ITEM('color',(#9691),#1517);+#9742=STYLED_ITEM('color',(#9678),#1570);+#9743=STYLED_ITEM('color',(#9691),#1586);+#9744=STYLED_ITEM('color',(#9691),#1646);+#9745=STYLED_ITEM('color',(#9691),#1662);+#9746=STYLED_ITEM('color',(#9678),#1715);+#9747=STYLED_ITEM('color',(#9691),#1731);+#9748=STYLED_ITEM('color',(#9691),#1791);+#9749=STYLED_ITEM('color',(#9691),#1807);+#9750=STYLED_ITEM('color',(#9678),#1860);+#9751=STYLED_ITEM('color',(#9691),#1876);+#9752=STYLED_ITEM('color',(#9691),#1936);+#9753=STYLED_ITEM('color',(#9691),#1952);+#9754=STYLED_ITEM('color',(#9678),#2005);+#9755=STYLED_ITEM('color',(#9678),#2037);+#9756=STYLED_ITEM('color',(#9691),#2055);+#9757=STYLED_ITEM('color',(#9678),#2080);+#9758=STYLED_ITEM('color',(#9691),#2098);+#9759=STYLED_ITEM('color',(#9678),#2119);+#9760=STYLED_ITEM('color',(#9691),#2137);+#9761=STYLED_ITEM('color',(#9678),#2158);+#9762=STYLED_ITEM('color',(#9691),#2176);+#9763=STYLED_ITEM('color',(#9678),#2197);+#9764=STYLED_ITEM('color',(#9691),#2215);+#9765=STYLED_ITEM('color',(#9678),#2236);+#9766=STYLED_ITEM('color',(#9691),#2254);+#9767=STYLED_ITEM('color',(#9678),#2275);+#9768=STYLED_ITEM('color',(#9691),#2293);+#9769=STYLED_ITEM('color',(#9678),#2314);+#9770=STYLED_ITEM('color',(#9691),#2332);+#9771=STYLED_ITEM('color',(#9678),#2353);+#9772=STYLED_ITEM('color',(#9678),#2363);+#9773=STYLED_ITEM('color',(#9691),#2375);+#9774=STYLED_ITEM('color',(#9678),#2396);+#9775=STYLED_ITEM('color',(#9691),#2414);+#9776=STYLED_ITEM('color',(#9678),#2435);+#9777=STYLED_ITEM('color',(#9691),#2453);+#9778=STYLED_ITEM('color',(#9678),#2474);+#9779=STYLED_ITEM('color',(#9691),#2492);+#9780=STYLED_ITEM('color',(#9678),#2513);+#9781=STYLED_ITEM('color',(#9691),#2531);+#9782=STYLED_ITEM('color',(#9678),#2552);+#9783=STYLED_ITEM('color',(#9691),#2570);+#9784=STYLED_ITEM('color',(#9678),#2591);+#9785=STYLED_ITEM('color',(#9691),#2609);+#9786=STYLED_ITEM('color',(#9678),#2630);+#9787=STYLED_ITEM('color',(#9691),#2648);+#9788=STYLED_ITEM('color',(#9678),#2669);+#9789=STYLED_ITEM('color',(#9678),#2686);+#9790=STYLED_ITEM('color',(#9678),#2701);+#9791=STYLED_ITEM('color',(#9678),#2716);+#9792=STYLED_ITEM('color',(#9691),#2732);+#9793=STYLED_ITEM('color',(#9678),#2757);+#9794=STYLED_ITEM('color',(#9691),#2775);+#9795=STYLED_ITEM('color',(#9678),#2796);+#9796=STYLED_ITEM('color',(#9691),#2814);+#9797=STYLED_ITEM('color',(#9678),#2835);+#9798=STYLED_ITEM('color',(#9691),#2853);+#9799=STYLED_ITEM('color',(#9678),#2874);+#9800=STYLED_ITEM('color',(#9691),#2892);+#9801=STYLED_ITEM('color',(#9678),#2913);+#9802=STYLED_ITEM('color',(#9691),#2931);+#9803=STYLED_ITEM('color',(#9678),#2952);+#9804=STYLED_ITEM('color',(#9691),#2970);+#9805=STYLED_ITEM('color',(#9678),#2991);+#9806=STYLED_ITEM('color',(#9691),#3009);+#9807=STYLED_ITEM('color',(#9678),#3030);+#9808=STYLED_ITEM('color',(#9691),#3043);+#9809=STYLED_ITEM('color',(#9678),#3067);+#9810=STYLED_ITEM('color',(#9678),#3145);+#9811=STYLED_ITEM('color',(#9678),#3159);+#9812=STYLED_ITEM('color',(#9691),#3197);+#9813=STYLED_ITEM('color',(#9691),#3209);+#9814=STYLED_ITEM('color',(#9691),#3219);+#9815=STYLED_ITEM('color',(#9691),#3230);+#9816=STYLED_ITEM('color',(#9691),#3240);+#9817=STYLED_ITEM('color',(#9691),#3250);+#9818=STYLED_ITEM('color',(#9691),#3260);+#9819=STYLED_ITEM('color',(#9691),#3270);+#9820=STYLED_ITEM('color',(#9691),#3280);+#9821=STYLED_ITEM('color',(#9691),#3289);+#9822=STYLED_ITEM('color',(#9691),#3301);+#9823=STYLED_ITEM('color',(#9691),#3311);+#9824=STYLED_ITEM('color',(#9691),#3321);+#9825=STYLED_ITEM('color',(#9691),#3331);+#9826=STYLED_ITEM('color',(#9691),#3341);+#9827=STYLED_ITEM('color',(#9691),#3351);+#9828=STYLED_ITEM('color',(#9691),#3361);+#9829=STYLED_ITEM('color',(#9691),#3371);+#9830=STYLED_ITEM('color',(#9691),#3379);+#9831=STYLED_ITEM('color',(#9691),#3391);+#9832=STYLED_ITEM('color',(#9691),#3401);+#9833=STYLED_ITEM('color',(#9691),#3411);+#9834=STYLED_ITEM('color',(#9691),#3421);+#9835=STYLED_ITEM('color',(#9691),#3431);+#9836=STYLED_ITEM('color',(#9691),#3441);+#9837=STYLED_ITEM('color',(#9691),#3451);+#9838=STYLED_ITEM('color',(#9691),#3461);+#9839=STYLED_ITEM('color',(#9691),#3469);+#9840=STYLED_ITEM('color',(#9691),#3481);+#9841=STYLED_ITEM('color',(#9691),#3491);+#9842=STYLED_ITEM('color',(#9691),#3501);+#9843=STYLED_ITEM('color',(#9691),#3511);+#9844=STYLED_ITEM('color',(#9691),#3521);+#9845=STYLED_ITEM('color',(#9691),#3531);+#9846=STYLED_ITEM('color',(#9691),#3541);+#9847=STYLED_ITEM('color',(#9691),#3551);+#9848=STYLED_ITEM('color',(#9691),#3559);+#9849=STYLED_ITEM('color',(#9691),#3571);+#9850=STYLED_ITEM('color',(#9691),#3581);+#9851=STYLED_ITEM('color',(#9691),#3591);+#9852=STYLED_ITEM('color',(#9691),#3601);+#9853=STYLED_ITEM('color',(#9691),#3611);+#9854=STYLED_ITEM('color',(#9691),#3621);+#9855=STYLED_ITEM('color',(#9691),#3631);+#9856=STYLED_ITEM('color',(#9691),#3641);+#9857=STYLED_ITEM('color',(#9691),#3649);+#9858=STYLED_ITEM('color',(#9691),#3661);+#9859=STYLED_ITEM('color',(#9691),#3671);+#9860=STYLED_ITEM('color',(#9691),#3681);+#9861=STYLED_ITEM('color',(#9691),#3691);+#9862=STYLED_ITEM('color',(#9691),#3701);+#9863=STYLED_ITEM('color',(#9691),#3711);+#9864=STYLED_ITEM('color',(#9691),#3721);+#9865=STYLED_ITEM('color',(#9691),#3731);+#9866=STYLED_ITEM('color',(#9691),#3739);+#9867=STYLED_ITEM('color',(#9691),#3751);+#9868=STYLED_ITEM('color',(#9691),#3761);+#9869=STYLED_ITEM('color',(#9691),#3771);+#9870=STYLED_ITEM('color',(#9691),#3781);+#9871=STYLED_ITEM('color',(#9691),#3791);+#9872=STYLED_ITEM('color',(#9691),#3801);+#9873=STYLED_ITEM('color',(#9691),#3811);+#9874=STYLED_ITEM('color',(#9691),#3821);+#9875=STYLED_ITEM('color',(#9691),#3829);+#9876=STYLED_ITEM('color',(#9691),#3841);+#9877=STYLED_ITEM('color',(#9691),#3851);+#9878=STYLED_ITEM('color',(#9691),#3861);+#9879=STYLED_ITEM('color',(#9691),#3871);+#9880=STYLED_ITEM('color',(#9691),#3881);+#9881=STYLED_ITEM('color',(#9691),#3891);+#9882=STYLED_ITEM('color',(#9691),#3901);+#9883=STYLED_ITEM('color',(#9691),#3911);+#9884=STYLED_ITEM('color',(#9678),#3919);+#9885=STYLED_ITEM('color',(#9678),#3933);+#9886=STYLED_ITEM('color',(#9691),#4011);+#9887=STYLED_ITEM('color',(#9678),#4031);+#9888=STYLED_ITEM('color',(#9691),#4059);+#9889=STYLED_ITEM('color',(#9691),#4131);+#9890=STYLED_ITEM('color',(#9691),#4149);+#9891=STYLED_ITEM('color',(#9678),#4202);+#9892=STYLED_ITEM('color',(#9691),#4213);+#9893=STYLED_ITEM('color',(#9691),#4273);+#9894=STYLED_ITEM('color',(#9691),#4290);+#9895=STYLED_ITEM('color',(#9678),#4343);+#9896=STYLED_ITEM('color',(#9691),#4354);+#9897=STYLED_ITEM('color',(#9691),#4414);+#9898=STYLED_ITEM('color',(#9691),#4431);+#9899=STYLED_ITEM('color',(#9678),#4484);+#9900=STYLED_ITEM('color',(#9691),#4495);+#9901=STYLED_ITEM('color',(#9691),#4555);+#9902=STYLED_ITEM('color',(#9691),#4572);+#9903=STYLED_ITEM('color',(#9678),#4625);+#9904=STYLED_ITEM('color',(#9691),#4636);+#9905=STYLED_ITEM('color',(#9691),#4696);+#9906=STYLED_ITEM('color',(#9691),#4713);+#9907=STYLED_ITEM('color',(#9678),#4766);+#9908=STYLED_ITEM('color',(#9691),#4777);+#9909=STYLED_ITEM('color',(#9691),#4837);+#9910=STYLED_ITEM('color',(#9691),#4854);+#9911=STYLED_ITEM('color',(#9678),#4907);+#9912=STYLED_ITEM('color',(#9691),#4918);+#9913=STYLED_ITEM('color',(#9691),#4978);+#9914=STYLED_ITEM('color',(#9691),#4995);+#9915=STYLED_ITEM('color',(#9678),#5048);+#9916=STYLED_ITEM('color',(#9691),#5056);+#9917=STYLED_ITEM('color',(#9691),#5114);+#9918=STYLED_ITEM('color',(#9691),#5131);+#9919=STYLED_ITEM('color',(#9691),#5179);+#9920=STYLED_ITEM('color',(#9691),#5245);+#9921=STYLED_ITEM('color',(#9691),#5261);+#9922=STYLED_ITEM('color',(#9678),#5309);+#9923=STYLED_ITEM('color',(#9691),#5319);+#9924=STYLED_ITEM('color',(#9691),#5379);+#9925=STYLED_ITEM('color',(#9691),#5395);+#9926=STYLED_ITEM('color',(#9678),#5448);+#9927=STYLED_ITEM('color',(#9691),#5459);+#9928=STYLED_ITEM('color',(#9691),#5519);+#9929=STYLED_ITEM('color',(#9691),#5535);+#9930=STYLED_ITEM('color',(#9678),#5588);+#9931=STYLED_ITEM('color',(#9691),#5599);+#9932=STYLED_ITEM('color',(#9691),#5659);+#9933=STYLED_ITEM('color',(#9691),#5675);+#9934=STYLED_ITEM('color',(#9678),#5728);+#9935=STYLED_ITEM('color',(#9691),#5739);+#9936=STYLED_ITEM('color',(#9691),#5799);+#9937=STYLED_ITEM('color',(#9691),#5815);+#9938=STYLED_ITEM('color',(#9678),#5868);+#9939=STYLED_ITEM('color',(#9691),#5879);+#9940=STYLED_ITEM('color',(#9691),#5939);+#9941=STYLED_ITEM('color',(#9691),#5955);+#9942=STYLED_ITEM('color',(#9678),#6008);+#9943=STYLED_ITEM('color',(#9691),#6019);+#9944=STYLED_ITEM('color',(#9691),#6079);+#9945=STYLED_ITEM('color',(#9691),#6095);+#9946=STYLED_ITEM('color',(#9678),#6148);+#9947=STYLED_ITEM('color',(#9691),#6159);+#9948=STYLED_ITEM('color',(#9691),#6219);+#9949=STYLED_ITEM('color',(#9691),#6235);+#9950=STYLED_ITEM('color',(#9678),#6288);+#9951=STYLED_ITEM('color',(#9691),#6309);+#9952=STYLED_ITEM('color',(#9691),#6378);+#9953=STYLED_ITEM('color',(#9691),#6394);+#9954=STYLED_ITEM('color',(#9678),#6447);+#9955=STYLED_ITEM('color',(#9691),#6463);+#9956=STYLED_ITEM('color',(#9691),#6523);+#9957=STYLED_ITEM('color',(#9691),#6539);+#9958=STYLED_ITEM('color',(#9678),#6592);+#9959=STYLED_ITEM('color',(#9691),#6608);+#9960=STYLED_ITEM('color',(#9691),#6668);+#9961=STYLED_ITEM('color',(#9691),#6684);+#9962=STYLED_ITEM('color',(#9678),#6737);+#9963=STYLED_ITEM('color',(#9691),#6753);+#9964=STYLED_ITEM('color',(#9691),#6813);+#9965=STYLED_ITEM('color',(#9691),#6829);+#9966=STYLED_ITEM('color',(#9678),#6882);+#9967=STYLED_ITEM('color',(#9691),#6898);+#9968=STYLED_ITEM('color',(#9691),#6958);+#9969=STYLED_ITEM('color',(#9691),#6974);+#9970=STYLED_ITEM('color',(#9678),#7027);+#9971=STYLED_ITEM('color',(#9691),#7043);+#9972=STYLED_ITEM('color',(#9691),#7103);+#9973=STYLED_ITEM('color',(#9691),#7119);+#9974=STYLED_ITEM('color',(#9678),#7172);+#9975=STYLED_ITEM('color',(#9691),#7188);+#9976=STYLED_ITEM('color',(#9691),#7248);+#9977=STYLED_ITEM('color',(#9691),#7264);+#9978=STYLED_ITEM('color',(#9678),#7317);+#9979=STYLED_ITEM('color',(#9691),#7333);+#9980=STYLED_ITEM('color',(#9691),#7393);+#9981=STYLED_ITEM('color',(#9691),#7409);+#9982=STYLED_ITEM('color',(#9691),#7460);+#9983=STYLED_ITEM('color',(#9691),#7470);+#9984=STYLED_ITEM('color',(#9691),#7482);+#9985=STYLED_ITEM('color',(#9691),#7494);+#9986=STYLED_ITEM('color',(#9691),#7506);+#9987=STYLED_ITEM('color',(#9691),#7518);+#9988=STYLED_ITEM('color',(#9691),#7530);+#9989=STYLED_ITEM('color',(#9691),#7542);+#9990=STYLED_ITEM('color',(#9678),#7554);+#9991=STYLED_ITEM('color',(#9678),#7583);+#9992=STYLED_ITEM('color',(#9691),#7592);+#9993=STYLED_ITEM('color',(#9691),#7604);+#9994=STYLED_ITEM('color',(#9691),#7616);+#9995=STYLED_ITEM('color',(#9691),#7628);+#9996=STYLED_ITEM('color',(#9691),#7640);+#9997=STYLED_ITEM('color',(#9691),#7652);+#9998=STYLED_ITEM('color',(#9691),#7664);+#9999=STYLED_ITEM('color',(#9678),#7676);+#10000=STYLED_ITEM('color',(#9691),#7685);+#10001=STYLED_ITEM('color',(#9691),#7695);+#10002=STYLED_ITEM('color',(#9678),#7708);+#10003=STYLED_ITEM('color',(#9691),#7738);+#10004=STYLED_ITEM('color',(#9691),#7748);+#10005=STYLED_ITEM('color',(#9691),#7759);+#10006=STYLED_ITEM('color',(#9691),#7769);+#10007=STYLED_ITEM('color',(#9691),#7779);+#10008=STYLED_ITEM('color',(#9691),#7789);+#10009=STYLED_ITEM('color',(#9691),#7799);+#10010=STYLED_ITEM('color',(#9691),#7809);+#10011=STYLED_ITEM('color',(#9691),#7818);+#10012=STYLED_ITEM('color',(#9691),#7828);+#10013=STYLED_ITEM('color',(#9691),#7838);+#10014=STYLED_ITEM('color',(#9691),#7848);+#10015=STYLED_ITEM('color',(#9691),#7858);+#10016=STYLED_ITEM('color',(#9691),#7868);+#10017=STYLED_ITEM('color',(#9691),#7878);+#10018=STYLED_ITEM('color',(#9691),#7888);+#10019=STYLED_ITEM('color',(#9691),#7896);+#10020=STYLED_ITEM('color',(#9691),#7906);+#10021=STYLED_ITEM('color',(#9691),#7916);+#10022=STYLED_ITEM('color',(#9691),#7926);+#10023=STYLED_ITEM('color',(#9691),#7936);+#10024=STYLED_ITEM('color',(#9691),#7946);+#10025=STYLED_ITEM('color',(#9691),#7956);+#10026=STYLED_ITEM('color',(#9691),#7966);+#10027=STYLED_ITEM('color',(#9691),#7974);+#10028=STYLED_ITEM('color',(#9691),#7984);+#10029=STYLED_ITEM('color',(#9691),#7994);+#10030=STYLED_ITEM('color',(#9691),#8004);+#10031=STYLED_ITEM('color',(#9691),#8014);+#10032=STYLED_ITEM('color',(#9691),#8024);+#10033=STYLED_ITEM('color',(#9691),#8034);+#10034=STYLED_ITEM('color',(#9691),#8044);+#10035=STYLED_ITEM('color',(#9691),#8052);+#10036=STYLED_ITEM('color',(#9691),#8062);+#10037=STYLED_ITEM('color',(#9691),#8072);+#10038=STYLED_ITEM('color',(#9691),#8082);+#10039=STYLED_ITEM('color',(#9691),#8092);+#10040=STYLED_ITEM('color',(#9691),#8102);+#10041=STYLED_ITEM('color',(#9691),#8112);+#10042=STYLED_ITEM('color',(#9691),#8122);+#10043=STYLED_ITEM('color',(#9691),#8130);+#10044=STYLED_ITEM('color',(#9691),#8140);+#10045=STYLED_ITEM('color',(#9691),#8150);+#10046=STYLED_ITEM('color',(#9691),#8160);+#10047=STYLED_ITEM('color',(#9691),#8170);+#10048=STYLED_ITEM('color',(#9691),#8180);+#10049=STYLED_ITEM('color',(#9691),#8190);+#10050=STYLED_ITEM('color',(#9691),#8200);+#10051=STYLED_ITEM('color',(#9691),#8208);+#10052=STYLED_ITEM('color',(#9691),#8218);+#10053=STYLED_ITEM('color',(#9691),#8228);+#10054=STYLED_ITEM('color',(#9691),#8238);+#10055=STYLED_ITEM('color',(#9691),#8248);+#10056=STYLED_ITEM('color',(#9691),#8258);+#10057=STYLED_ITEM('color',(#9691),#8268);+#10058=STYLED_ITEM('color',(#9691),#8278);+#10059=STYLED_ITEM('color',(#9691),#8286);+#10060=STYLED_ITEM('color',(#9691),#8296);+#10061=STYLED_ITEM('color',(#9691),#8306);+#10062=STYLED_ITEM('color',(#9691),#8316);+#10063=STYLED_ITEM('color',(#9691),#8326);+#10064=STYLED_ITEM('color',(#9691),#8336);+#10065=STYLED_ITEM('color',(#9691),#8346);+#10066=STYLED_ITEM('color',(#9691),#8354);+#10067=STYLED_ITEM('color',(#9691),#8365);+#10068=STYLED_ITEM('color',(#9691),#8374);+#10069=STYLED_ITEM('color',(#9691),#8384);+#10070=STYLED_ITEM('color',(#9691),#8394);+#10071=STYLED_ITEM('color',(#9691),#8404);+#10072=STYLED_ITEM('color',(#9691),#8414);+#10073=STYLED_ITEM('color',(#9691),#8423);+#10074=STYLED_ITEM('color',(#9691),#8433);+#10075=STYLED_ITEM('color',(#9691),#8443);+#10076=STYLED_ITEM('color',(#9691),#8452);+#10077=STYLED_ITEM('color',(#9691),#8462);+#10078=STYLED_ITEM('color',(#9691),#8472);+#10079=STYLED_ITEM('color',(#9691),#8482);+#10080=STYLED_ITEM('color',(#9691),#8492);+#10081=STYLED_ITEM('color',(#9691),#8500);+#10082=STYLED_ITEM('color',(#9691),#8510);+#10083=STYLED_ITEM('color',(#9691),#8520);+#10084=STYLED_ITEM('color',(#9691),#8529);+#10085=STYLED_ITEM('color',(#9691),#8539);+#10086=STYLED_ITEM('color',(#9691),#8549);+#10087=STYLED_ITEM('color',(#9691),#8559);+#10088=STYLED_ITEM('color',(#9691),#8569);+#10089=STYLED_ITEM('color',(#9691),#8577);+#10090=STYLED_ITEM('color',(#9691),#8587);+#10091=STYLED_ITEM('color',(#9691),#8597);+#10092=STYLED_ITEM('color',(#9691),#8606);+#10093=STYLED_ITEM('color',(#9691),#8616);+#10094=STYLED_ITEM('color',(#9691),#8626);+#10095=STYLED_ITEM('color',(#9691),#8636);+#10096=STYLED_ITEM('color',(#9691),#8646);+#10097=STYLED_ITEM('color',(#9691),#8654);+#10098=STYLED_ITEM('color',(#9691),#8664);+#10099=STYLED_ITEM('color',(#9691),#8674);+#10100=STYLED_ITEM('color',(#9691),#8683);+#10101=STYLED_ITEM('color',(#9691),#8693);+#10102=STYLED_ITEM('color',(#9691),#8703);+#10103=STYLED_ITEM('color',(#9691),#8713);+#10104=STYLED_ITEM('color',(#9691),#8723);+#10105=STYLED_ITEM('color',(#9691),#8731);+#10106=STYLED_ITEM('color',(#9691),#8741);+#10107=STYLED_ITEM('color',(#9691),#8751);+#10108=STYLED_ITEM('color',(#9691),#8760);+#10109=STYLED_ITEM('color',(#9691),#8770);+#10110=STYLED_ITEM('color',(#9691),#8780);+#10111=STYLED_ITEM('color',(#9691),#8790);+#10112=STYLED_ITEM('color',(#9691),#8800);+#10113=STYLED_ITEM('color',(#9691),#8808);+#10114=STYLED_ITEM('color',(#9691),#8818);+#10115=STYLED_ITEM('color',(#9691),#8828);+#10116=STYLED_ITEM('color',(#9691),#8837);+#10117=STYLED_ITEM('color',(#9691),#8847);+#10118=STYLED_ITEM('color',(#9691),#8857);+#10119=STYLED_ITEM('color',(#9691),#8867);+#10120=STYLED_ITEM('color',(#9691),#8877);+#10121=STYLED_ITEM('color',(#9691),#8885);+#10122=STYLED_ITEM('color',(#9691),#8895);+#10123=STYLED_ITEM('color',(#9691),#8905);+#10124=STYLED_ITEM('color',(#9691),#8914);+#10125=STYLED_ITEM('color',(#9691),#8924);+#10126=STYLED_ITEM('color',(#9691),#8934);+#10127=STYLED_ITEM('color',(#9691),#8944);+#10128=STYLED_ITEM('color',(#9691),#8954);+#10129=STYLED_ITEM('color',(#9691),#8962);+#10130=STYLED_ITEM('color',(#9691),#8974);+#10131=STYLED_ITEM('color',(#9691),#8984);+#10132=STYLED_ITEM('color',(#9691),#8995);+#10133=STYLED_ITEM('color',(#9691),#9004);+#10134=STYLED_ITEM('color',(#9691),#9014);+#10135=STYLED_ITEM('color',(#9691),#9024);+#10136=STYLED_ITEM('color',(#9691),#9034);+#10137=STYLED_ITEM('color',(#9691),#9044);+#10138=STYLED_ITEM('color',(#9691),#9053);+#10139=STYLED_ITEM('color',(#9691),#9065);+#10140=STYLED_ITEM('color',(#9691),#9075);+#10141=STYLED_ITEM('color',(#9691),#9085);+#10142=STYLED_ITEM('color',(#9691),#9094);+#10143=STYLED_ITEM('color',(#9691),#9104);+#10144=STYLED_ITEM('color',(#9691),#9114);+#10145=STYLED_ITEM('color',(#9691),#9124);+#10146=STYLED_ITEM('color',(#9691),#9134);+#10147=STYLED_ITEM('color',(#9691),#9142);+#10148=STYLED_ITEM('color',(#9691),#9154);+#10149=STYLED_ITEM('color',(#9691),#9164);+#10150=STYLED_ITEM('color',(#9691),#9174);+#10151=STYLED_ITEM('color',(#9691),#9183);+#10152=STYLED_ITEM('color',(#9691),#9193);+#10153=STYLED_ITEM('color',(#9691),#9203);+#10154=STYLED_ITEM('color',(#9691),#9213);+#10155=STYLED_ITEM('color',(#9691),#9223);+#10156=STYLED_ITEM('color',(#9691),#9231);+#10157=STYLED_ITEM('color',(#9691),#9243);+#10158=STYLED_ITEM('color',(#9691),#9253);+#10159=STYLED_ITEM('color',(#9691),#9263);+#10160=STYLED_ITEM('color',(#9691),#9272);+#10161=STYLED_ITEM('color',(#9691),#9282);+#10162=STYLED_ITEM('color',(#9691),#9292);+#10163=STYLED_ITEM('color',(#9691),#9302);+#10164=STYLED_ITEM('color',(#9691),#9312);+#10165=STYLED_ITEM('color',(#9691),#9320);+#10166=STYLED_ITEM('color',(#9691),#9332);+#10167=STYLED_ITEM('color',(#9691),#9342);+#10168=STYLED_ITEM('color',(#9691),#9352);+#10169=STYLED_ITEM('color',(#9691),#9361);+#10170=STYLED_ITEM('color',(#9691),#9371);+#10171=STYLED_ITEM('color',(#9691),#9381);+#10172=STYLED_ITEM('color',(#9691),#9391);+#10173=STYLED_ITEM('color',(#9691),#9401);+#10174=STYLED_ITEM('color',(#9691),#9409);+#10175=STYLED_ITEM('color',(#9691),#9421);+#10176=STYLED_ITEM('color',(#9691),#9431);+#10177=STYLED_ITEM('color',(#9691),#9441);+#10178=STYLED_ITEM('color',(#9691),#9450);+#10179=STYLED_ITEM('color',(#9691),#9460);+#10180=STYLED_ITEM('color',(#9691),#9470);+#10181=STYLED_ITEM('color',(#9691),#9480);+#10182=STYLED_ITEM('color',(#9691),#9490);+#10183=STYLED_ITEM('color',(#9691),#9498);+#10184=STYLED_ITEM('color',(#9691),#9510);+#10185=STYLED_ITEM('color',(#9691),#9520);+#10186=STYLED_ITEM('color',(#9691),#9530);+#10187=STYLED_ITEM('color',(#9691),#9539);+#10188=STYLED_ITEM('color',(#9691),#9549);+#10189=STYLED_ITEM('color',(#9691),#9559);+#10190=STYLED_ITEM('color',(#9691),#9569);+#10191=STYLED_ITEM('color',(#9691),#9579);+#10192=STYLED_ITEM('color',(#9691),#9587);+#10193=STYLED_ITEM('color',(#9691),#9597);+#10194=STYLED_ITEM('color',(#9691),#9607);+#10195=STYLED_ITEM('color',(#9691),#9616);+#10196=STYLED_ITEM('color',(#9691),#9626);+#10197=STYLED_ITEM('color',(#9691),#9636);+#10198=STYLED_ITEM('color',(#9691),#9646);+#10199=STYLED_ITEM('color',(#9691),#9656);+#10200=STYLED_ITEM('color',(#10201),#9664);+#10201=PRESENTATION_STYLE_ASSIGNMENT((#10202,#10208));+#10202=SURFACE_STYLE_USAGE(.BOTH.,#10203);+#10203=SURFACE_SIDE_STYLE('',(#10204));+#10204=SURFACE_STYLE_FILL_AREA(#10205);+#10205=FILL_AREA_STYLE('',(#10206));+#10206=FILL_AREA_STYLE_COLOUR('',#10207);+#10207=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#10208=CURVE_STYLE('',#9686,POSITIVE_LENGTH_MEASURE(0.1),#10207);+ENDSEC;+END-ISO-10303-21;