CY62158EV30LL-45ZSXI

@@ -0,0 +1,138 @@+# CY62158EV30LL-45ZSXI++**Cypress Semicon** · Pre-ordered Products · TSOP-44++CY62158EV30LL-45ZSXI from Cypress Semicon, in a TSOP-44. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | A4 | input | Address input A4 selecting one of the 1024K word locations. |+| 2 | A3 | input | Address input A3 selecting one of the 1024K word locations. |+| 3 | A2 | input | Address input A2 selecting one of the 1024K word locations. |+| 4 | A1 | input | Address input A1 selecting one of the 1024K word locations. |+| 5 | A0 | input | Address input A0 selecting one of the 1024K word locations. |+| 6 | CE1 | input | Active-low chip enable 1; LOW with CE2 HIGH selects the device, HIGH deselects it and enters standby. |+| 7 | NC | unconnected | No connect; not connected on the die. |+| 8 | NC | unconnected | No connect; not connected on the die. |+| 9 | I/O0 | bidirectional | Data input/output bit 0, high impedance when deselected, outputs disabled or during a write. |+| 10 | I/O1 | bidirectional | Data input/output bit 1, high impedance when deselected, outputs disabled or during a write. |+| 11 | VCC | power_in | Power supply, 2.20 V to 3.60 V operating range. |+| 12 | VSS | power_in | Ground. |+| 13 | I/O2 | bidirectional | Data input/output bit 2, high impedance when deselected, outputs disabled or during a write. |+| 14 | I/O3 | bidirectional | Data input/output bit 3, high impedance when deselected, outputs disabled or during a write. |+| 15 | NC | unconnected | No connect; not connected on the die. |+| 16 | NC | unconnected | No connect; not connected on the die. |+| 17 | WE | input | Active-low write enable; LOW with CE1 LOW and CE2 HIGH writes I/O data to the addressed location. |+| 18 | A19 | input | Address input A19 selecting one of the 1024K word locations. |+| 19 | A18 | input | Address input A18 selecting one of the 1024K word locations. |+| 20 | A17 | input | Address input A17 selecting one of the 1024K word locations. |+| 21 | A16 | input | Address input A16 selecting one of the 1024K word locations. |+| 22 | A15 | input | Address input A15 selecting one of the 1024K word locations. |+| 23 | A14 | input | Address input A14 selecting one of the 1024K word locations. |+| 24 | A13 | input | Address input A13 selecting one of the 1024K word locations. |+| 25 | A12 | input | Address input A12 selecting one of the 1024K word locations. |+| 26 | A11 | input | Address input A11 selecting one of the 1024K word locations. |+| 27 | A10 | input | Address input A10 selecting one of the 1024K word locations. |+| 28 | A9 | input | Address input A9 selecting one of the 1024K word locations. |+| 29 | NC | unconnected | No connect; not connected on the die. |+| 30 | NC | unconnected | No connect; not connected on the die. |+| 31 | I/O4 | bidirectional | Data input/output bit 4, high impedance when deselected, outputs disabled or during a write. |+| 32 | I/O5 | bidirectional | Data input/output bit 5, high impedance when deselected, outputs disabled or during a write. |+| 33 | VCC | power_in | Power supply, 2.20 V to 3.60 V operating range. |+| 34 | VSS | power_in | Ground. |+| 35 | I/O6 | bidirectional | Data input/output bit 6, high impedance when deselected, outputs disabled or during a write. |+| 36 | I/O7 | bidirectional | Data input/output bit 7, high impedance when deselected, outputs disabled or during a write. |+| 37 | NC | unconnected | No connect; not connected on the die. |+| 38 | NC | unconnected | No connect; not connected on the die. |+| 39 | A8 | input | Address input A8 selecting one of the 1024K word locations. |+| 40 | CE2 | input | Active-high chip enable 2; HIGH with CE1 LOW selects the device, LOW deselects it and enters standby. |+| 41 | OE | input | Active-low output enable; LOW with the device selected and WE HIGH drives data onto the I/O pins, HIGH puts outputs in high impedance. |+| 42 | A7 | input | Address input A7 selecting one of the 1024K word locations. |+| 43 | A6 | input | Address input A6 selecting one of the 1024K word locations. |+| 44 | A5 | input | Address input A5 selecting one of the 1024K word locations. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Cypress Semicon |+| Package | TSOP-44 |+| Category | Electronic Tools/Instruments/Consumables |+| Pins | 44 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Output HIGH voltage | VOH | 2 |  |  | V | IOH = -0.1 mA | 5 |+| Output HIGH voltage | VOH | 2.4 |  |  | V | IOH = -1.0 mA, VCC > 2.70 V | 5 |+| Output LOW voltage | VOL |  |  | 0.4 | V | IOL = 0.1 mA | 5 |+| Input HIGH voltage | VIH | 1.8 |  |  | V | VCC = 2.2 V to 2.7 V (max VCC + 0.3 V) | 5 |+| Input HIGH voltage | VIH | 2.2 |  |  | V | VCC = 2.7 V to 3.6 V (max VCC + 0.3 V) | 5 |+| Input LOW voltage | VIL | -0.3 |  | 0.6 | V | VCC = 2.2 V to 2.7 V | 5 |+| Input LOW voltage | VIL | -0.3 |  | 0.8 | V | VCC = 2.7 V to 3.6 V | 5 |+| Input leakage current | IIX | -1 |  | 1 | µA | GND < VI < VCC | 5 |+| Output leakage current | IOZ | -1 |  | 1 | µA | GND < VO < VCC, Output Disabled | 5 |+| VCC operating supply current | ICC |  | 18 | 25 | mA | f = fmax = 1/tRC, VCC = VCCmax, IOUT = 0 mA, CMOS levels | 5 |+| VCC operating supply current | ICC |  | 6 | 7 | mA | f = 1 MHz | 5 |+| Automatic CE power down current, CMOS inputs | ISB1 |  | 2 | 8 | µA | CE1 > VCC, 0.2 V, CE2 < 0.2 V, VIN > VCC, 0.2 V, VIN < 0.2 V, f = fmax (Address and Data Only), f = 0 (OE and WE), VCC = 3.60 V | 5 |+| VCC for data retention | VDR | 1.5 |  |  | V |  | 7 |+| Data retention current | ICCDR |  | 3.2 | 8 | µA | VCC = 1.5 V, CE1 > VCC, 0.2 V or CE2 < 0.2 V, VIN > VCC, 0.2 V or VIN < 0.2 V | 7 |+| Chip deselect to data retention time | tCDR | 0 |  |  | ns |  | 7 |+| Operation recovery time | tR | 45 |  |  | ns |  | 7 |+| Read cycle time | tRC | 45 |  |  | ns |  | 8 |+| Address to data valid | tAA |  |  | 45 | ns |  | 8 |+| Data hold from address change | tOHA | 10 |  |  | ns |  | 8 |+| CE1 LOW and CE2 HIGH to data valid | tACE |  |  | 45 | ns |  | 8 |+| OE LOW to data valid | tDOE |  |  | 22 | ns |  | 8 |+| OE LOW to Low Z | tLZOE | 5 |  |  | ns |  | 8 |+| OE HIGH to High Z | tHZOE |  |  | 18 | ns |  | 8 |+| CE1 LOW and CE2 HIGH to Low Z | tLZCE | 10 |  |  | ns |  | 8 |+| CE1 HIGH or CE2 LOW to High Z | tHZCE |  |  | 18 | ns |  | 8 |+| CE1 LOW and CE2 HIGH to Power Up | tPU | 0 |  |  | ns |  | 8 |+| CE1 HIGH or CE2 LOW to Power Down | tPD |  |  | 45 | ns |  | 8 |+| Write cycle time | tWC | 45 |  |  | ns |  | 8 |+| CE1 LOW and CE2 HIGH to Write End | tSCE | 35 |  |  | ns |  | 8 |+| Address setup to Write End | tAW | 35 |  |  | ns |  | 8 |+| Address Hold from Write End | tHA | 0 |  |  | ns |  | 8 |+| Address setup to Write Start | tSA | 0 |  |  | ns |  | 8 |+| WE pulse width | tPWE | 35 |  |  | ns |  | 8 |+| Data setup to Write End | tSD | 25 |  |  | ns |  | 8 |+| Data Hold from Write End | tHD | 0 |  |  | ns |  | 8 |+| WE LOW to High Z | tHZWE |  |  | 18 | ns |  | 8 |+| WE HIGH to Low Z | tLZWE | 10 |  |  | ns |  | 8 |+| Storage Temperature |  | -65 |  | 150 | °C |  | 5 |+| Ambient Temperature with Power Applied |  | -55 |  | 125 | °C |  | 5 |+| Supply Voltage to Ground Potential |  | -0.3 |  |  | V | to VCC(max) + 0.3 V | 5 |+| DC Voltage Applied to Outputs in High Z State |  | -0.3 |  |  | V | to VCC(max) + 0.3 V | 5 |+| DC Input Voltage |  | -0.3 |  |  | V | to VCC(max) + 0.3 V | 5 |+| Output Current into Outputs (LOW) |  |  |  | 20 | mA |  | 5 |+| Static Discharge Voltage |  | 2001 |  |  | V | MIL-STD-883, Method 3015, > 2001 V | 5 |+| Latch up Current |  | 200 |  |  | mA | > 200 mA | 5 |+| Operating ambient temperature (Industrial) | TA | -40 |  | 85 | °C | Industrial | 5 |+| Supply voltage | VCC | 2.2 |  | 3.6 | V |  | 5 |+| Input capacitance | CIN |  |  | 10 | pF | TA = 25 °C, f = 1 MHz, VCC = VCC(typ) | 6 |+| Output capacitance | COUT |  |  | 10 | pF | TA = 25 °C, f = 1 MHz, VCC = VCC(typ) | 6 |+| Thermal resistance (junction to ambient), 44-pin TSOP II | ΘJA |  | 65.91 |  | °C/W | Still Air, soldered on a 3 × 4.5 inch, two-layer printed circuit board | 6 |+| Thermal resistance (junction to case), 44-pin TSOP II | ΘJC |  | 13.96 |  | °C/W | Still Air, soldered on a 3 × 4.5 inch, two-layer printed circuit board | 6 |++## CAD (KiCad official)++- Symbol: `CY62158EV30LL-45ZSXI`+- Footprint: `Package_SO:TSOP-II-44_10.16x18.41mm_P0.8mm`+- 3D model: TSOP-44 (KiCad packages3D, STEP)+- 3D model files: `cy62158ev30ll-45zsxi-etched.step` / `cy62158ev30ll-45zsxi-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cy62158ev30ll-45zsxi.step` / `cy62158ev30ll-45zsxi.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Cypress Semicon datasheet](docs/cy62158ev30ll-45zsxi-datasheet.pdf) (20 pp, sha256 `c41410c1365fd607`, retrieved 2026-10-31, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cy62158ev30ll-45zsxi-datasheet.pdf)

@@ -0,0 +1,1052 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "CY62158EV30LL-45ZSXI",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 44,+      "span_mm": 17.35,+      "dash_mm": 0.4338,+      "gap_mm": 0.2603,+      "pad_stroke_mm": 0.09+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 7,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 44,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 1.388,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -5.83,+      5.83,+      -8.525,+      8.525+    ],+    "pads_bbox_mm": [+      -6.35,+      6.35,+      -8.675,+      8.675+    ],+    "seating_z_mm": -0.0+  },+  "sources": {+    "glb": "cy62158ev30ll-45zsxi-etched.glb",+    "glb_sha256": "d84944dcd6acc6ee38bb0e8e4aac68530ae8fb79901ff61378e1254307fac4b9",+    "footprint": "cy62158ev30ll-45zsxi.kicad_mod",+    "footprint_sha256": "e6580fdb6547b03db7e3cfe6a75001d8d1f2b8eefd76977ad7620521033f4695",+    "pins": "page.json component.pins",+    "pins_sha256": "0b7c95ea19420db12dfafaace11c0f9b88ed029fc73a19c15758a0d700e1427d"+  },+  "generator": "adom-wiki 1.8.4 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "A4",+      "x": -6.45,+      "y": -8.4,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "2",+      "text": "A3",+      "x": -6.45,+      "y": -7.6,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "3",+      "text": "A2",+      "x": -6.45,+      "y": -6.8,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "4",+      "text": "A1",+      "x": -6.45,+      "y": -6.0,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "5",+      "text": "A0",+      "x": -6.45,+      "y": -5.2,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "6",+      "text": "CE1",+      "x": -6.45,+      "y": -4.4,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "7",+      "text": "NC",+      "x": -6.45,+      "y": -3.6,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "8",+      "text": "NC",+      "x": -6.45,+      "y": -2.8,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "9",+      "text": "I/O0",+      "x": -6.45,+      "y": -2.0,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "10",+      "text": "I/O1",+      "x": -6.45,+      "y": -1.2,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "11",+      "text": "VCC",+      "x": -6.45,+      "y": -0.4,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "12",+      "text": "VSS",+      "x": -6.45,+      "y": 0.4,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "13",+      "text": "I/O2",+      "x": -6.45,+      "y": 1.2,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "14",+      "text": "I/O3",+      "x": -6.45,+      "y": 2.0,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "15",+      "text": "NC",+      "x": -6.45,+      "y": 2.8,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "16",+      "text": "NC",+      "x": -6.45,+      "y": 3.6,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "17",+      "text": "WE",+      "x": -6.45,+      "y": 4.4,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "18",+      "text": "A19",+      "x": -6.45,+      "y": 5.2,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "19",+      "text": "A18",+      "x": -6.45,+      "y": 6.0,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "20",+      "text": "A17",+      "x": -6.45,+      "y": 6.8,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "21",+      "text": "A16",+      "x": -6.45,+      "y": 7.6,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "22",+      "text": "A15",+      "x": -6.45,+      "y": 8.4,+      "align": "right",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "23",+      "text": "A14",+      "x": 6.45,+      "y": 8.4,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "24",+      "text": "A13",+      "x": 6.45,+      "y": 7.6,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "25",+      "text": "A12",+      "x": 6.45,+      "y": 6.8,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "26",+      "text": "A11",+      "x": 6.45,+      "y": 6.0,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "27",+      "text": "A10",+      "x": 6.45,+      "y": 5.2,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "28",+      "text": "A9",+      "x": 6.45,+      "y": 4.4,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "29",+      "text": "NC",+      "x": 6.45,+      "y": 3.6,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "30",+      "text": "NC",+      "x": 6.45,+      "y": 2.8,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "31",+      "text": "I/O4",+      "x": 6.45,+      "y": 2.0,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "32",+      "text": "I/O5",+      "x": 6.45,+      "y": 1.2,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "33",+      "text": "VCC",+      "x": 6.45,+      "y": 0.4,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "34",+      "text": "VSS",+      "x": 6.45,+      "y": -0.4,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "35",+      "text": "I/O6",+      "x": 6.45,+      "y": -1.2,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "36",+      "text": "I/O7",+      "x": 6.45,+      "y": -2.0,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "37",+      "text": "NC",+      "x": 6.45,+      "y": -2.8,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "38",+      "text": "NC",+      "x": 6.45,+      "y": -3.6,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "39",+      "text": "A8",+      "x": 6.45,+      "y": -4.4,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "40",+      "text": "CE2",+      "x": 6.45,+      "y": -5.2,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "41",+      "text": "OE",+      "x": 6.45,+      "y": -6.0,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "42",+      "text": "A7",+      "x": 6.45,+      "y": -6.8,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "43",+      "text": "A6",+      "x": 6.45,+      "y": -7.6,+      "align": "left",+      "vertical": false,+      "h": 0.4+    },+    {+      "pad": "44",+      "text": "A5",+      "x": 6.45,+      "y": -8.4,+      "align": "left",+      "vertical": false,+      "h": 0.4+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        -8.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        -7.6+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        -6.8+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        -6.0+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        -5.2+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        -4.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        -3.6+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        -2.8+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        -2.0+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        -1.2+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        -0.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        0.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        1.2+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        2.0+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        2.8+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        3.6+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        4.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        5.2+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        6.0+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        6.8+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "21",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        7.6+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "22",+      "shape": "roundrect",+      "center_mm": [+        -5.5875,+        8.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "23",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        8.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "24",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        7.6+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "25",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        6.8+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "26",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        6.0+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "27",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        5.2+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "28",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        4.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "29",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        3.6+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "30",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        2.8+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "31",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        2.0+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "32",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        1.2+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "33",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        0.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "34",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        -0.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "35",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        -1.2+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "36",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        -2.0+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "37",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        -2.8+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "38",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        -3.6+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "39",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        -4.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "40",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        -5.2+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "41",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        -6.0+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "42",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        -6.8+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "43",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        -7.6+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    },+    {+      "number": "44",+      "shape": "roundrect",+      "center_mm": [+        5.5875,+        -8.4+      ],+      "size_mm": [+        1.525,+        0.55+      ],+      "rot": 0.0+    }+  ]+}

@@ -0,0 +1,516 @@+(footprint "TSOP-II-44_10.16x18.41mm_P0.8mm"+	(version 20260206)+	(generator "kicad-footprint-generator")+	(layer "F.Cu")+	(descr "TSOP-II, 44 Pin (http://www.issi.com/WW/pdf/61-64C5128AL.pdf)")+	(tags "TSOP-II SO")+	(property "Reference" "REF**"+		(at 0 -10.16 0)+		(layer "F.SilkS")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "Value" "TSOP-II-44_10.16x18.41mm_P0.8mm"+		(at 0 10.16 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(property "KiLib_Generator" "package/gullwing"+		(at 0 0 0)+		(layer "F.SilkS")+		(hide yes)+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(attr smd)+	(duplicate_pad_numbers_are_jumpers no)+	(fp_line+		(start -5.19 -9.315)+		(end 5.19 -9.315)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -5.19 -8.935)+		(end -5.19 -9.315)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start -5.19 9.315)+		(end -5.19 8.935)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 5.19 -9.315)+		(end 5.19 -8.935)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 5.19 8.935)+		(end 5.19 9.315)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_line+		(start 5.19 9.315)+		(end -5.19 9.315)+		(stroke+			(width 0.12)+			(type solid)+		)+		(layer "F.SilkS")+	)+	(fp_poly+		(pts+			(xy -5.83 -8.94)+			(xy -6.17 -9.41)+			(xy -5.49 -9.41)+		)+		(stroke+			(width 0.12)+			(type solid)+		)+		(fill yes)+		(layer "F.SilkS")+	)+	(fp_line+		(start -6.6 -8.93)+		(end -5.33 -8.93)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -6.6 8.93)+		(end -6.6 -8.93)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -5.33 -9.46)+		(end 5.33 -9.46)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -5.33 -8.93)+		(end -5.33 -9.46)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -5.33 8.93)+		(end -6.6 8.93)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start -5.33 9.46)+		(end -5.33 8.93)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 5.33 -9.46)+		(end 5.33 -8.93)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 5.33 -8.93)+		(end 6.6 -8.93)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 5.33 8.93)+		(end 5.33 9.46)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 5.33 9.46)+		(end -5.33 9.46)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 6.6 -8.93)+		(end 6.6 8.93)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_line+		(start 6.6 8.93)+		(end 5.33 8.93)+		(stroke+			(width 0.05)+			(type solid)+		)+		(layer "F.CrtYd")+	)+	(fp_poly+		(pts+			(xy -4.08 -9.205)+			(xy 5.08 -9.205)+			(xy 5.08 9.205)+			(xy -5.08 9.205)+			(xy -5.08 -8.205)+		)+		(stroke+			(width 0.1)+			(type solid)+		)+		(fill no)+		(layer "F.Fab")+	)+	(fp_text user "${REFERENCE}"+		(at 0 0 0)+		(layer "F.Fab")+		(effects+			(font+				(size 1 1)+				(thickness 0.15)+			)+		)+	)+	(pad "1" smd roundrect+		(at -5.5875 -8.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "2" smd roundrect+		(at -5.5875 -7.6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "3" smd roundrect+		(at -5.5875 -6.8)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "4" smd roundrect+		(at -5.5875 -6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "5" smd roundrect+		(at -5.5875 -5.2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "6" smd roundrect+		(at -5.5875 -4.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "7" smd roundrect+		(at -5.5875 -3.6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "8" smd roundrect+		(at -5.5875 -2.8)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "9" smd roundrect+		(at -5.5875 -2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "10" smd roundrect+		(at -5.5875 -1.2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "11" smd roundrect+		(at -5.5875 -0.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "12" smd roundrect+		(at -5.5875 0.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "13" smd roundrect+		(at -5.5875 1.2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "14" smd roundrect+		(at -5.5875 2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "15" smd roundrect+		(at -5.5875 2.8)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "16" smd roundrect+		(at -5.5875 3.6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "17" smd roundrect+		(at -5.5875 4.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "18" smd roundrect+		(at -5.5875 5.2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "19" smd roundrect+		(at -5.5875 6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "20" smd roundrect+		(at -5.5875 6.8)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "21" smd roundrect+		(at -5.5875 7.6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "22" smd roundrect+		(at -5.5875 8.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "23" smd roundrect+		(at 5.5875 8.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "24" smd roundrect+		(at 5.5875 7.6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "25" smd roundrect+		(at 5.5875 6.8)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "26" smd roundrect+		(at 5.5875 6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "27" smd roundrect+		(at 5.5875 5.2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "28" smd roundrect+		(at 5.5875 4.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "29" smd roundrect+		(at 5.5875 3.6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "30" smd roundrect+		(at 5.5875 2.8)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "31" smd roundrect+		(at 5.5875 2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "32" smd roundrect+		(at 5.5875 1.2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "33" smd roundrect+		(at 5.5875 0.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "34" smd roundrect+		(at 5.5875 -0.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "35" smd roundrect+		(at 5.5875 -1.2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "36" smd roundrect+		(at 5.5875 -2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "37" smd roundrect+		(at 5.5875 -2.8)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "38" smd roundrect+		(at 5.5875 -3.6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "39" smd roundrect+		(at 5.5875 -4.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "40" smd roundrect+		(at 5.5875 -5.2)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "41" smd roundrect+		(at 5.5875 -6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "42" smd roundrect+		(at 5.5875 -6.8)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "43" smd roundrect+		(at 5.5875 -7.6)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(pad "44" smd roundrect+		(at 5.5875 -8.4)+		(size 1.525 0.55)+		(layers "F.Cu" "F.Mask" "F.Paste")+		(roundrect_rratio 0.25)+	)+	(embedded_fonts no)+	(model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/TSOP-II-44_10.16x18.41mm_P0.8mm.step"+		(offset+			(xyz 0 0 0)+		)+		(scale+			(xyz 1 1 1)+		)+		(rotate+			(xyz 0 0 0)+		)+	)+)

@@ -0,0 +1,189 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+  (symbol "CY62158EV30LL-45ZSXI" (in_bom yes) (on_board yes)+    (property "Reference" "U" (at 0 30.48 0) (effects (font (size 1.27 1.27))))+    (property "Value" "CY62158EV30LL-45ZSXI" (at 0 -33.02 0) (effects (font (size 1.27 1.27))))+    (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+    (symbol "CY62158EV30LL-45ZSXI_0_1"+    (rectangle (start -12.70 27.94) (end 12.70 -30.48)+      (stroke (width 0.254) (type default)) (fill (type background)))+    )+    (symbol "CY62158EV30LL-45ZSXI_1_1"+    (pin input line (at -17.78 25.40 0) (length 5.08)+      (name "A4" (effects (font (size 1.27 1.27))))+      (number "1" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 22.86 0) (length 5.08)+      (name "A3" (effects (font (size 1.27 1.27))))+      (number "2" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 20.32 0) (length 5.08)+      (name "A2" (effects (font (size 1.27 1.27))))+      (number "3" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 17.78 0) (length 5.08)+      (name "A1" (effects (font (size 1.27 1.27))))+      (number "4" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 15.24 0) (length 5.08)+      (name "A0" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 12.70 0) (length 5.08)+      (name "CE1" (effects (font (size 1.27 1.27))))+      (number "6" (effects (font (size 1.27 1.27))))+    )+    (pin no_connect line (at -17.78 10.16 0) (length 5.08)+      (name "NC" (effects (font (size 1.27 1.27))))+      (number "7" (effects (font (size 1.27 1.27))))+    )+    (pin no_connect line (at -17.78 7.62 0) (length 5.08)+      (name "NC" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 5.08 0) (length 5.08)+      (name "I/O0" (effects (font (size 1.27 1.27))))+      (number "9" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 2.54 0) (length 5.08)+      (name "I/O1" (effects (font (size 1.27 1.27))))+      (number "10" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 0.00 0) (length 5.08)+      (name "VCC" (effects (font (size 1.27 1.27))))+      (number "11" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at -17.78 -2.54 0) (length 5.08)+      (name "VSS" (effects (font (size 1.27 1.27))))+      (number "12" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -5.08 0) (length 5.08)+      (name "I/O2" (effects (font (size 1.27 1.27))))+      (number "13" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at -17.78 -7.62 0) (length 5.08)+      (name "I/O3" (effects (font (size 1.27 1.27))))+      (number "14" (effects (font (size 1.27 1.27))))+    )+    (pin no_connect line (at -17.78 -10.16 0) (length 5.08)+      (name "NC" (effects (font (size 1.27 1.27))))+      (number "15" (effects (font (size 1.27 1.27))))+    )+    (pin no_connect line (at -17.78 -12.70 0) (length 5.08)+      (name "NC" (effects (font (size 1.27 1.27))))+      (number "16" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -15.24 0) (length 5.08)+      (name "WE" (effects (font (size 1.27 1.27))))+      (number "17" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -17.78 0) (length 5.08)+      (name "A19" (effects (font (size 1.27 1.27))))+      (number "18" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -20.32 0) (length 5.08)+      (name "A18" (effects (font (size 1.27 1.27))))+      (number "19" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -22.86 0) (length 5.08)+      (name "A17" (effects (font (size 1.27 1.27))))+      (number "20" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -25.40 0) (length 5.08)+      (name "A16" (effects (font (size 1.27 1.27))))+      (number "21" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at -17.78 -27.94 0) (length 5.08)+      (name "A15" (effects (font (size 1.27 1.27))))+      (number "22" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 25.40 180) (length 5.08)+      (name "A5" (effects (font (size 1.27 1.27))))+      (number "44" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 22.86 180) (length 5.08)+      (name "A6" (effects (font (size 1.27 1.27))))+      (number "43" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 20.32 180) (length 5.08)+      (name "A7" (effects (font (size 1.27 1.27))))+      (number "42" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 17.78 180) (length 5.08)+      (name "OE" (effects (font (size 1.27 1.27))))+      (number "41" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 15.24 180) (length 5.08)+      (name "CE2" (effects (font (size 1.27 1.27))))+      (number "40" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 12.70 180) (length 5.08)+      (name "A8" (effects (font (size 1.27 1.27))))+      (number "39" (effects (font (size 1.27 1.27))))+    )+    (pin no_connect line (at 17.78 10.16 180) (length 5.08)+      (name "NC" (effects (font (size 1.27 1.27))))+      (number "38" (effects (font (size 1.27 1.27))))+    )+    (pin no_connect line (at 17.78 7.62 180) (length 5.08)+      (name "NC" (effects (font (size 1.27 1.27))))+      (number "37" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 5.08 180) (length 5.08)+      (name "I/O7" (effects (font (size 1.27 1.27))))+      (number "36" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 2.54 180) (length 5.08)+      (name "I/O6" (effects (font (size 1.27 1.27))))+      (number "35" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 0.00 180) (length 5.08)+      (name "VSS" (effects (font (size 1.27 1.27))))+      (number "34" (effects (font (size 1.27 1.27))))+    )+    (pin power_in line (at 17.78 -2.54 180) (length 5.08)+      (name "VCC" (effects (font (size 1.27 1.27))))+      (number "33" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -5.08 180) (length 5.08)+      (name "I/O5" (effects (font (size 1.27 1.27))))+      (number "32" (effects (font (size 1.27 1.27))))+    )+    (pin bidirectional line (at 17.78 -7.62 180) (length 5.08)+      (name "I/O4" (effects (font (size 1.27 1.27))))+      (number "31" (effects (font (size 1.27 1.27))))+    )+    (pin no_connect line (at 17.78 -10.16 180) (length 5.08)+      (name "NC" (effects (font (size 1.27 1.27))))+      (number "30" (effects (font (size 1.27 1.27))))+    )+    (pin no_connect line (at 17.78 -12.70 180) (length 5.08)+      (name "NC" (effects (font (size 1.27 1.27))))+      (number "29" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -15.24 180) (length 5.08)+      (name "A9" (effects (font (size 1.27 1.27))))+      (number "28" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -17.78 180) (length 5.08)+      (name "A10" (effects (font (size 1.27 1.27))))+      (number "27" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -20.32 180) (length 5.08)+      (name "A11" (effects (font (size 1.27 1.27))))+      (number "26" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -22.86 180) (length 5.08)+      (name "A12" (effects (font (size 1.27 1.27))))+      (number "25" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -25.40 180) (length 5.08)+      (name "A13" (effects (font (size 1.27 1.27))))+      (number "24" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 -27.94 180) (length 5.08)+      (name "A14" (effects (font (size 1.27 1.27))))+      (number "23" (effects (font (size 1.27 1.27))))+    )+    )+  )+)

@@ -0,0 +1,238 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="TSOP-II-44_10.16x18.41mm_P0.8mm">+  <description>TSOP-II-44, 10.16 x 18.41 mm, 0.8 mm pitch</description>+  <smd name="1" x="-5.5875" y="8.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="2" x="-5.5875" y="7.6000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="3" x="-5.5875" y="6.8000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="4" x="-5.5875" y="6.0000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="5" x="-5.5875" y="5.2000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="6" x="-5.5875" y="4.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="7" x="-5.5875" y="3.6000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="8" x="-5.5875" y="2.8000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="9" x="-5.5875" y="2.0000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="10" x="-5.5875" y="1.2000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="11" x="-5.5875" y="0.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="12" x="-5.5875" y="-0.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="13" x="-5.5875" y="-1.2000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="14" x="-5.5875" y="-2.0000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="15" x="-5.5875" y="-2.8000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="16" x="-5.5875" y="-3.6000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="17" x="-5.5875" y="-4.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="18" x="-5.5875" y="-5.2000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="19" x="-5.5875" y="-6.0000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="20" x="-5.5875" y="-6.8000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="21" x="-5.5875" y="-7.6000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="22" x="-5.5875" y="-8.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="23" x="5.5875" y="-8.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="24" x="5.5875" y="-7.6000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="25" x="5.5875" y="-6.8000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="26" x="5.5875" y="-6.0000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="27" x="5.5875" y="-5.2000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="28" x="5.5875" y="-4.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="29" x="5.5875" y="-3.6000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="30" x="5.5875" y="-2.8000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="31" x="5.5875" y="-2.0000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="32" x="5.5875" y="-1.2000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="33" x="5.5875" y="-0.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="34" x="5.5875" y="0.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="35" x="5.5875" y="1.2000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="36" x="5.5875" y="2.0000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="37" x="5.5875" y="2.8000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="38" x="5.5875" y="3.6000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="39" x="5.5875" y="4.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="40" x="5.5875" y="5.2000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="41" x="5.5875" y="6.0000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="42" x="5.5875" y="6.8000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="43" x="5.5875" y="7.6000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <smd name="44" x="5.5875" y="8.4000" dx="1.5250" dy="0.5500" layer="1" roundness="50"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-5.8300" y="8.9400"/>+    <vertex x="-6.1700" y="9.4100"/>+    <vertex x="-5.4900" y="9.4100"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-4.0800" y="9.2050"/>+    <vertex x="5.0800" y="9.2050"/>+    <vertex x="5.0800" y="-9.2050"/>+    <vertex x="-5.0800" y="-9.2050"/>+    <vertex x="-5.0800" y="8.2050"/>+  </polygon>+  <wire x1="-5.1900" y1="9.3150" x2="5.1900" y2="9.3150" width="0.1200" layer="21"/>+  <wire x1="-5.1900" y1="8.9350" x2="-5.1900" y2="9.3150" width="0.1200" layer="21"/>+  <wire x1="-5.1900" y1="-9.3150" x2="-5.1900" y2="-8.9350" width="0.1200" layer="21"/>+  <wire x1="5.1900" y1="9.3150" x2="5.1900" y2="8.9350" width="0.1200" layer="21"/>+  <wire x1="5.1900" y1="-8.9350" x2="5.1900" y2="-9.3150" width="0.1200" layer="21"/>+  <wire x1="5.1900" y1="-9.3150" x2="-5.1900" y2="-9.3150" width="0.1200" layer="21"/>+  <text x="0" y="9.915" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-9.915" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="CY62158EV30LL-45ZSXI">+  <wire x1="-12.7" y1="27.94" x2="12.7" y2="27.94" width="0.254" layer="94"/>+  <wire x1="12.7" y1="27.94" x2="12.7" y2="-30.48" width="0.254" layer="94"/>+  <wire x1="12.7" y1="-30.48" x2="-12.7" y2="-30.48" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="-30.48" x2="-12.7" y2="27.94" width="0.254" layer="94"/>+  <text x="0.0000" y="30.4800" size="1.27" layer="95" align="center">&gt;NAME</text>+  <text x="0.0000" y="-33.0200" size="1.27" layer="96" align="center">&gt;VALUE</text>+  <pin name="A4" x="-17.78" y="25.4" length="middle" direction="in"/>+  <pin name="A3" x="-17.78" y="22.86" length="middle" direction="in"/>+  <pin name="A2" x="-17.78" y="20.32" length="middle" direction="in"/>+  <pin name="A1" x="-17.78" y="17.78" length="middle" direction="in"/>+  <pin name="A0" x="-17.78" y="15.24" length="middle" direction="in"/>+  <pin name="CE1" x="-17.78" y="12.7" length="middle" direction="in"/>+  <pin name="NC" x="-17.78" y="10.16" length="middle" direction="nc"/>+  <pin name="NC@2" x="-17.78" y="7.62" length="middle" direction="nc"/>+  <pin name="I/O0" x="-17.78" y="5.08" length="middle" direction="io"/>+  <pin name="I/O1" x="-17.78" y="2.54" length="middle" direction="io"/>+  <pin name="VCC" x="-17.78" y="0" length="middle" direction="pwr"/>+  <pin name="VSS" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+  <pin name="I/O2" x="-17.78" y="-5.08" length="middle" direction="io"/>+  <pin name="I/O3" x="-17.78" y="-7.62" length="middle" direction="io"/>+  <pin name="NC@3" x="-17.78" y="-10.16" length="middle" direction="nc"/>+  <pin name="NC@4" x="-17.78" y="-12.7" length="middle" direction="nc"/>+  <pin name="WE" x="-17.78" y="-15.24" length="middle" direction="in"/>+  <pin name="A19" x="-17.78" y="-17.78" length="middle" direction="in"/>+  <pin name="A18" x="-17.78" y="-20.32" length="middle" direction="in"/>+  <pin name="A17" x="-17.78" y="-22.86" length="middle" direction="in"/>+  <pin name="A16" x="-17.78" y="-25.4" length="middle" direction="in"/>+  <pin name="A15" x="-17.78" y="-27.94" length="middle" direction="in"/>+  <pin name="A5" x="17.78" y="25.4" length="middle" direction="in" rot="R180"/>+  <pin name="A6" x="17.78" y="22.86" length="middle" direction="in" rot="R180"/>+  <pin name="A7" x="17.78" y="20.32" length="middle" direction="in" rot="R180"/>+  <pin name="OE" x="17.78" y="17.78" length="middle" direction="in" rot="R180"/>+  <pin name="CE2" x="17.78" y="15.24" length="middle" direction="in" rot="R180"/>+  <pin name="A8" x="17.78" y="12.7" length="middle" direction="in" rot="R180"/>+  <pin name="NC@5" x="17.78" y="10.16" length="middle" direction="nc" rot="R180"/>+  <pin name="NC@6" x="17.78" y="7.62" length="middle" direction="nc" rot="R180"/>+  <pin name="I/O7" x="17.78" y="5.08" length="middle" direction="io" rot="R180"/>+  <pin name="I/O6" x="17.78" y="2.54" length="middle" direction="io" rot="R180"/>+  <pin name="VSS@2" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>+  <pin name="VCC@2" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>+  <pin name="I/O5" x="17.78" y="-5.08" length="middle" direction="io" rot="R180"/>+  <pin name="I/O4" x="17.78" y="-7.62" length="middle" direction="io" rot="R180"/>+  <pin name="NC@7" x="17.78" y="-10.16" length="middle" direction="nc" rot="R180"/>+  <pin name="NC@8" x="17.78" y="-12.7" length="middle" direction="nc" rot="R180"/>+  <pin name="A9" x="17.78" y="-15.24" length="middle" direction="in" rot="R180"/>+  <pin name="A10" x="17.78" y="-17.78" length="middle" direction="in" rot="R180"/>+  <pin name="A11" x="17.78" y="-20.32" length="middle" direction="in" rot="R180"/>+  <pin name="A12" x="17.78" y="-22.86" length="middle" direction="in" rot="R180"/>+  <pin name="A13" x="17.78" y="-25.4" length="middle" direction="in" rot="R180"/>+  <pin name="A14" x="17.78" y="-27.94" length="middle" direction="in" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="CY62158EV30LL-45ZSXI" prefix="U">+  <description></description>+  <gates>+    <gate name="G$1" symbol="CY62158EV30LL-45ZSXI" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="TSOP-II-44_10.16x18.41mm_P0.8mm">+      <connects>+        <connect gate="G$1" pin="A4" pad="1"/>+        <connect gate="G$1" pin="A3" pad="2"/>+        <connect gate="G$1" pin="A2" pad="3"/>+        <connect gate="G$1" pin="A1" pad="4"/>+        <connect gate="G$1" pin="A0" pad="5"/>+        <connect gate="G$1" pin="CE1" pad="6"/>+        <connect gate="G$1" pin="NC" pad="7"/>+        <connect gate="G$1" pin="NC@2" pad="8"/>+        <connect gate="G$1" pin="I/O0" pad="9"/>+        <connect gate="G$1" pin="I/O1" pad="10"/>+        <connect gate="G$1" pin="VCC" pad="11"/>+        <connect gate="G$1" pin="VSS" pad="12"/>+        <connect gate="G$1" pin="I/O2" pad="13"/>+        <connect gate="G$1" pin="I/O3" pad="14"/>+        <connect gate="G$1" pin="NC@3" pad="15"/>+        <connect gate="G$1" pin="NC@4" pad="16"/>+        <connect gate="G$1" pin="WE" pad="17"/>+        <connect gate="G$1" pin="A19" pad="18"/>+        <connect gate="G$1" pin="A18" pad="19"/>+        <connect gate="G$1" pin="A17" pad="20"/>+        <connect gate="G$1" pin="A16" pad="21"/>+        <connect gate="G$1" pin="A15" pad="22"/>+        <connect gate="G$1" pin="A5" pad="44"/>+        <connect gate="G$1" pin="A6" pad="43"/>+        <connect gate="G$1" pin="A7" pad="42"/>+        <connect gate="G$1" pin="OE" pad="41"/>+        <connect gate="G$1" pin="CE2" pad="40"/>+        <connect gate="G$1" pin="A8" pad="39"/>+        <connect gate="G$1" pin="NC@5" pad="38"/>+        <connect gate="G$1" pin="NC@6" pad="37"/>+        <connect gate="G$1" pin="I/O7" pad="36"/>+        <connect gate="G$1" pin="I/O6" pad="35"/>+        <connect gate="G$1" pin="VSS@2" pad="34"/>+        <connect gate="G$1" pin="VCC@2" pad="33"/>+        <connect gate="G$1" pin="I/O5" pad="32"/>+        <connect gate="G$1" pin="I/O4" pad="31"/>+        <connect gate="G$1" pin="NC@7" pad="30"/>+        <connect gate="G$1" pin="NC@8" pad="29"/>+        <connect gate="G$1" pin="A9" pad="28"/>+        <connect gate="G$1" pin="A10" pad="27"/>+        <connect gate="G$1" pin="A11" pad="26"/>+        <connect gate="G$1" pin="A12" pad="25"/>+        <connect gate="G$1" pin="A13" pad="24"/>+        <connect gate="G$1" pin="A14" pad="23"/>+      </connects>+      <technologies><technology name=""/></technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file

@@ -0,0 +1,13804 @@+ISO-10303-21;+HEADER;+/* TSOP-II-44_10.16x18.41mm_P0.8mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of TSOP-II-44_10.16x18.41mm_P0.8mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'TSOP-II-44_10.16x18.41mm_P0.8mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('TSOP-II-44_10.16x18.41mm_P0.8mm','TSOP-II-44_10.16x18.41mm_P0.8mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#13040);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#43,#96,#109,#128,#141,#330,#519,#532,#545,#554,#569,#633,#644,#663,#688,#706,#727,#745,#766,#784,#805,#823,#844,#862,#883,#901,#922,#940,#961,#979,#1000,#1018,#1039,#1057,#1078,#1096,#1117,#1135,#1156,#1174,#1195,#1213,#1234,#1252,#1273,#1291,#1312,#1330,#1351,#1369,#1390,#1408,#1429,#1447,#1468,#1486,#1507,#1517,#1529,#1550,#1568,#1589,#1607,#1628,#1646,#1667,#1685,#1706,#1724,#1745,#1763,#1784,#1802,#1823,#1841,#1862,#1880,#1901,#1919,#1940,#1958,#1979,#1997,#2018,#2036,#2057,#2075,#2096,#2114,#2135,#2153,#2174,#2192,#2213,#2231,#2252,#2270,#2291,#2309,#2330,#2348,#2369,#2386,#2401,#2416,#2427,#2451,#2641,#2655,#2669,#2683,#2873,#2893,#2924,#2996,#3012,#3065,#3076,#3136,#3152,#3205,#3216,#3276,#3292,#3345,#3356,#3416,#3432,#3485,#3496,#3556,#3572,#3625,#3636,#3696,#3712,#3765,#3776,#3836,#3852,#3905,#3916,#3976,#3992,#4045,#4056,#4116,#4132,#4185,#4196,#4256,#4272,#4325,#4336,#4396,#4412,#4465,#4476,#4536,#4552,#4605,#4616,#4676,#4692,#4745,#4756,#4816,#4832,#4885,#4896,#4956,#4972,#5025,#5036,#5096,#5112,#5165,#5176,#5236,#5252,#5305,#5316,#5376,#5392,#5445,#5456,#5516,#5532,#5585,#5596,#5656,#5672,#5725,#5736,#5796,#5812,#5865,#5873,#5931,#5947,#5995,#6061,#6077,#6125,#6135,#6195,#6211,#6264,#6275,#6335,#6351,#6404,#6415,#6475,#6491,#6544,#6555,#6615,#6631,#6684,#6695,#6755,#6771,#6824,#6835,#6895,#6911,#6964,#6975,#7035,#7051,#7104,#7115,#7175,#7191,#7244,#7255,#7315,#7331,#7384,#7395,#7455,#7471,#7524,#7535,#7595,#7611,#7664,#7675,#7735,#7751,#7804,#7815,#7875,#7891,#7944,#7955,#8015,#8031,#8084,#8095,#8155,#8171,#8224,#8235,#8295,#8311,#8364,#8375,#8435,#8451,#8504,#8515,#8575,#8591,#8644,#8655,#8715,#8731,#8784,#8795,#8855,#8871,#8924,#8935,#8995,#9011,#9062,#9072,#9084,#9096,#9108,#9120,#9132,#9144,#9156,#9168,#9180,#9192,#9204,#9216,#9228,#9240,#9252,#9264,#9276,#9288,#9300,#9312,#9324,#9353,#9362,#9374,#9386,#9398,#9410,#9422,#9434,#9446,#9458,#9470,#9482,#9494,#9506,#9518,#9530,#9542,#9554,#9566,#9578,#9590,#9602,#9614,#9623,#9633,#9640,#9650,#9661,#9671,#9681,#9691,#9701,#9711,#9720,#9730,#9740,#9750,#9760,#9770,#9780,#9790,#9798,#9808,#9818,#9828,#9838,#9848,#9858,#9868,#9876,#9886,#9896,#9906,#9916,#9926,#9936,#9946,#9954,#9964,#9974,#9984,#9994,#10004,#10014,#10024,#10032,#10042,#10052,#10062,#10072,#10082,#10092,#10102,#10110,#10120,#10130,#10140,#10150,#10160,#10170,#10180,#10188,#10198,#10208,#10218,#10228,#10238,#10248,#10258,#10266,#10276,#10286,#10296,#10306,#10316,#10326,#10336,#10344,#10354,#10364,#10374,#10384,#10394,#10404,#10414,#10422,#10432,#10442,#10452,#10462,#10472,#10482,#10492,#10500,#10510,#10520,#10530,#10540,#10550,#10560,#10570,#10578,#10588,#10598,#10608,#10618,#10628,#10638,#10648,#10656,#10666,#10676,#10686,#10696,#10706,#10716,#10726,#10734,#10744,#10754,#10764,#10774,#10784,#10794,#10804,#10812,#10822,#10832,#10842,#10852,#10862,#10872,#10882,#10890,#10900,#10910,#10920,#10930,#10940,#10950,#10960,#10968,#10978,#10988,#10998,#11008,#11018,#11028,#11038,#11046,#11056,#11066,#11076,#11086,#11096,#11106,#11116,#11124,#11134,#11144,#11154,#11164,#11174,#11184,#11194,#11202,#11212,#11222,#11232,#11242,#11252,#11262,#11272,#11280,#11290,#11300,#11310,#11320,#11330,#11340,#11348,#11359,#11368,#11378,#11388,#11398,#11408,#11417,#11427,#11437,#11446,#11456,#11466,#11476,#11486,#11494,#11504,#11514,#11523,#11533,#11543,#11553,#11563,#11571,#11581,#11591,#11600,#11610,#11620,#11630,#11640,#11648,#11658,#11668,#11677,#11687,#11697,#11707,#11717,#11725,#11735,#11745,#11754,#11764,#11774,#11784,#11794,#11802,#11812,#11822,#11831,#11841,#11851,#11861,#11871,#11879,#11889,#11899,#11908,#11918,#11928,#11938,#11948,#11956,#11966,#11976,#11985,#11995,#12005,#12015,#12025,#12033,#12043,#12053,#12062,#12072,#12082,#12092,#12102,#12110,#12120,#12130,#12139,#12149,#12159,#12169,#12179,#12187,#12197,#12207,#12216,#12226,#12236,#12246,#12256,#12264,#12274,#12284,#12293,#12303,#12313,#12323,#12333,#12341,#12351,#12361,#12370,#12380,#12390,#12400,#12410,#12418,#12428,#12438,#12447,#12457,#12467,#12477,#12487,#12495,#12505,#12515,#12524,#12534,#12544,#12554,#12564,#12572,#12582,#12592,#12601,#12611,#12621,#12631,#12641,#12649,#12659,#12669,#12678,#12688,#12698,#12708,#12718,#12726,#12736,#12746,#12755,#12765,#12775,#12785,#12795,#12803,#12813,#12823,#12832,#12842,#12852,#12862,#12872,#12880,#12890,#12900,#12909,#12919,#12929,#12939,#12949,#12957,#12967,#12977,#12986,#12996,#13006,#13016,#13026,#13034));+#17=ADVANCED_FACE('',(#18),#42,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#29,#34,#39));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(-4.849565445886,9.094130891773,0.1));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(4.849565445886,9.094130891773,0.1));+#26=LINE('',#23,#27);+#27=VECTOR('',#28,1.);+#28=DIRECTION('',(1.,1.110223024625E-16,0.));+#29=ORIENTED_EDGE('',*,*,#30,.T.);+#30=EDGE_CURVE('',#24,#31,#33,.T.);+#31=VERTEX_POINT('',#32);+#32=CARTESIAN_POINT('',(4.905,9.205,0.8));+#33=B_SPLINE_CURVE_WITH_KNOTS('',1,(#25,#32),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#34=ORIENTED_EDGE('',*,*,#35,.F.);+#35=EDGE_CURVE('',#36,#31,#38,.T.);+#36=VERTEX_POINT('',#37);+#37=CARTESIAN_POINT('',(-4.905,9.205,0.8));+#38=LINE('',#37,#27);+#39=ORIENTED_EDGE('',*,*,#40,.F.);+#40=EDGE_CURVE('',#22,#36,#41,.T.);+#41=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#37),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#42=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#37),(#25,#32)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.81),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#43=ADVANCED_FACE('',(#44),#93,.F.);+#44=FACE_BOUND('',#45,.T.);+#45=EDGE_LOOP('',(#20,#46,#53,#60,#67,#74,#81,#88));+#46=ORIENTED_EDGE('',*,*,#47,.T.);+#47=EDGE_CURVE('',#24,#48,#50,.T.);+#48=VERTEX_POINT('',#49);+#49=CARTESIAN_POINT('',(4.969130891773,8.974565445886,0.1));+#50=LINE('',#25,#51);+#51=VECTOR('',#52,1.);+#52=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#53=ORIENTED_EDGE('',*,*,#54,.T.);+#54=EDGE_CURVE('',#48,#55,#57,.T.);+#55=VERTEX_POINT('',#56);+#56=CARTESIAN_POINT('',(4.969130891773,-8.974565445886,0.1));+#57=LINE('',#49,#58);+#58=VECTOR('',#59,1.);+#59=DIRECTION('',(1.110223024625E-16,-1.,0.));+#60=ORIENTED_EDGE('',*,*,#61,.T.);+#61=EDGE_CURVE('',#55,#62,#64,.T.);+#62=VERTEX_POINT('',#63);+#63=CARTESIAN_POINT('',(4.849565445886,-9.094130891773,0.1));+#64=LINE('',#56,#65);+#65=VECTOR('',#66,1.);+#66=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#67=ORIENTED_EDGE('',*,*,#68,.T.);+#68=EDGE_CURVE('',#62,#69,#71,.T.);+#69=VERTEX_POINT('',#70);+#70=CARTESIAN_POINT('',(-4.849565445886,-9.094130891773,0.1));+#71=LINE('',#63,#72);+#72=VECTOR('',#73,1.);+#73=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#74=ORIENTED_EDGE('',*,*,#75,.T.);+#75=EDGE_CURVE('',#69,#76,#78,.T.);+#76=VERTEX_POINT('',#77);+#77=CARTESIAN_POINT('',(-4.969130891773,-8.974565445886,0.1));+#78=LINE('',#70,#79);+#79=VECTOR('',#80,1.);+#80=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#81=ORIENTED_EDGE('',*,*,#82,.T.);+#82=EDGE_CURVE('',#76,#83,#85,.T.);+#83=VERTEX_POINT('',#84);+#84=CARTESIAN_POINT('',(-4.969130891773,8.974565445886,0.1));+#85=LINE('',#77,#86);+#86=VECTOR('',#87,1.);+#87=DIRECTION('',(-1.110223024625E-16,1.,0.));+#88=ORIENTED_EDGE('',*,*,#89,.T.);+#89=EDGE_CURVE('',#83,#22,#90,.T.);+#90=LINE('',#84,#91);+#91=VECTOR('',#92,1.);+#92=DIRECTION('',(0.707106781187,0.707106781187,0.));+#93=PLANE('',#94);+#94=AXIS2_PLACEMENT_3D('',#23,#13,#95);+#95=DIRECTION('',(0.470540062844,-0.882378631461,0.));+#96=ADVANCED_FACE('',(#97),#108,.F.);+#97=FACE_BOUND('',#98,.F.);+#98=EDGE_LOOP('',(#46,#99,#104,#107));+#99=ORIENTED_EDGE('',*,*,#100,.T.);+#100=EDGE_CURVE('',#48,#101,#103,.T.);+#101=VERTEX_POINT('',#102);+#102=CARTESIAN_POINT('',(5.08,9.03,0.8));+#103=B_SPLINE_CURVE_WITH_KNOTS('',1,(#49,#102),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#104=ORIENTED_EDGE('',*,*,#105,.F.);+#105=EDGE_CURVE('',#31,#101,#106,.T.);+#106=LINE('',#32,#51);+#107=ORIENTED_EDGE('',*,*,#30,.F.);+#108=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#25,#32),(#49,#102)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#109=ADVANCED_FACE('',(#110),#126,.F.);+#110=FACE_BOUND('',#111,.F.);+#111=EDGE_LOOP('',(#112,#113,#118,#123));+#112=ORIENTED_EDGE('',*,*,#35,.T.);+#113=ORIENTED_EDGE('',*,*,#114,.T.);+#114=EDGE_CURVE('',#31,#115,#117,.T.);+#115=VERTEX_POINT('',#116);+#116=CARTESIAN_POINT('',(4.905,9.205,0.9));+#117=B_SPLINE_CURVE_WITH_KNOTS('',1,(#32,#116),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#118=ORIENTED_EDGE('',*,*,#119,.F.);+#119=EDGE_CURVE('',#120,#115,#122,.T.);+#120=VERTEX_POINT('',#121);+#121=CARTESIAN_POINT('',(-4.905,9.205,0.9));+#122=LINE('',#121,#27);+#123=ORIENTED_EDGE('',*,*,#124,.F.);+#124=EDGE_CURVE('',#36,#120,#125,.T.);+#125=B_SPLINE_CURVE_WITH_KNOTS('',1,(#37,#121),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#126=PLANE('',#127);+#127=AXIS2_PLACEMENT_3D('',#121,#59,#28);+#128=ADVANCED_FACE('',(#129),#140,.F.);+#129=FACE_BOUND('',#130,.F.);+#130=EDGE_LOOP('',(#88,#131,#132,#137));+#131=ORIENTED_EDGE('',*,*,#40,.T.);+#132=ORIENTED_EDGE('',*,*,#133,.F.);+#133=EDGE_CURVE('',#134,#36,#136,.T.);+#134=VERTEX_POINT('',#135);+#135=CARTESIAN_POINT('',(-5.08,9.03,0.8));+#136=LINE('',#135,#91);+#137=ORIENTED_EDGE('',*,*,#138,.F.);+#138=EDGE_CURVE('',#83,#134,#139,.T.);+#139=B_SPLINE_CURVE_WITH_KNOTS('',1,(#84,#135),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#140=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#84,#135),(#23,#37)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#141=ADVANCED_FACE('',(#142),#329,.F.);+#142=FACE_BOUND('',#143,.F.);+#143=EDGE_LOOP('',(#81,#144,#145,#151,#155,#159,#163,#167,#171,#175,#179,#183,#187,#191,#195,#199,#203,#207,#211,#215,#219,#223,#227,#231,#235,#239,#243,#247,#251,#255,#259,#263,#267,#271,#275,#279,#283,#287,#291,#295,#299,#303,#307,#311,#315,#319,#323,#326));+#144=ORIENTED_EDGE('',*,*,#138,.T.);+#145=ORIENTED_EDGE('',*,*,#146,.F.);+#146=EDGE_CURVE('',#147,#134,#149,.T.);+#147=VERTEX_POINT('',#148);+#148=CARTESIAN_POINT('',(-5.08,8.525,0.8));+#149=LINE('',#150,#86);+#150=CARTESIAN_POINT('',(-5.08,-9.03,0.8));+#151=ORIENTED_EDGE('',*,*,#152,.F.);+#152=EDGE_CURVE('',#153,#147,#149,.T.);+#153=VERTEX_POINT('',#154);+#154=CARTESIAN_POINT('',(-5.08,8.275,0.8));+#155=ORIENTED_EDGE('',*,*,#156,.F.);+#156=EDGE_CURVE('',#157,#153,#149,.T.);+#157=VERTEX_POINT('',#158);+#158=CARTESIAN_POINT('',(-5.08,7.725,0.8));+#159=ORIENTED_EDGE('',*,*,#160,.F.);+#160=EDGE_CURVE('',#161,#157,#149,.T.);+#161=VERTEX_POINT('',#162);+#162=CARTESIAN_POINT('',(-5.08,7.475,0.8));+#163=ORIENTED_EDGE('',*,*,#164,.F.);+#164=EDGE_CURVE('',#165,#161,#149,.T.);+#165=VERTEX_POINT('',#166);+#166=CARTESIAN_POINT('',(-5.08,6.925,0.8));+#167=ORIENTED_EDGE('',*,*,#168,.F.);+#168=EDGE_CURVE('',#169,#165,#149,.T.);+#169=VERTEX_POINT('',#170);+#170=CARTESIAN_POINT('',(-5.08,6.675,0.8));+#171=ORIENTED_EDGE('',*,*,#172,.F.);+#172=EDGE_CURVE('',#173,#169,#149,.T.);+#173=VERTEX_POINT('',#174);+#174=CARTESIAN_POINT('',(-5.08,6.125,0.8));+#175=ORIENTED_EDGE('',*,*,#176,.F.);+#176=EDGE_CURVE('',#177,#173,#149,.T.);+#177=VERTEX_POINT('',#178);+#178=CARTESIAN_POINT('',(-5.08,5.875,0.8));+#179=ORIENTED_EDGE('',*,*,#180,.F.);+#180=EDGE_CURVE('',#181,#177,#149,.T.);+#181=VERTEX_POINT('',#182);+#182=CARTESIAN_POINT('',(-5.08,5.325,0.8));+#183=ORIENTED_EDGE('',*,*,#184,.F.);+#184=EDGE_CURVE('',#185,#181,#149,.T.);+#185=VERTEX_POINT('',#186);+#186=CARTESIAN_POINT('',(-5.08,5.075,0.8));+#187=ORIENTED_EDGE('',*,*,#188,.F.);+#188=EDGE_CURVE('',#189,#185,#149,.T.);+#189=VERTEX_POINT('',#190);+#190=CARTESIAN_POINT('',(-5.08,4.525,0.8));+#191=ORIENTED_EDGE('',*,*,#192,.F.);+#192=EDGE_CURVE('',#193,#189,#149,.T.);+#193=VERTEX_POINT('',#194);+#194=CARTESIAN_POINT('',(-5.08,4.275,0.8));+#195=ORIENTED_EDGE('',*,*,#196,.F.);+#196=EDGE_CURVE('',#197,#193,#149,.T.);+#197=VERTEX_POINT('',#198);+#198=CARTESIAN_POINT('',(-5.08,3.725,0.8));+#199=ORIENTED_EDGE('',*,*,#200,.F.);+#200=EDGE_CURVE('',#201,#197,#149,.T.);+#201=VERTEX_POINT('',#202);+#202=CARTESIAN_POINT('',(-5.08,3.475,0.8));+#203=ORIENTED_EDGE('',*,*,#204,.F.);+#204=EDGE_CURVE('',#205,#201,#149,.T.);+#205=VERTEX_POINT('',#206);+#206=CARTESIAN_POINT('',(-5.08,2.925,0.8));+#207=ORIENTED_EDGE('',*,*,#208,.F.);+#208=EDGE_CURVE('',#209,#205,#149,.T.);+#209=VERTEX_POINT('',#210);+#210=CARTESIAN_POINT('',(-5.08,2.675,0.8));+#211=ORIENTED_EDGE('',*,*,#212,.F.);+#212=EDGE_CURVE('',#213,#209,#149,.T.);+#213=VERTEX_POINT('',#214);+#214=CARTESIAN_POINT('',(-5.08,2.125,0.8));+#215=ORIENTED_EDGE('',*,*,#216,.F.);+#216=EDGE_CURVE('',#217,#213,#149,.T.);+#217=VERTEX_POINT('',#218);+#218=CARTESIAN_POINT('',(-5.08,1.875,0.8));+#219=ORIENTED_EDGE('',*,*,#220,.F.);+#220=EDGE_CURVE('',#221,#217,#149,.T.);+#221=VERTEX_POINT('',#222);+#222=CARTESIAN_POINT('',(-5.08,1.325,0.8));+#223=ORIENTED_EDGE('',*,*,#224,.F.);+#224=EDGE_CURVE('',#225,#221,#149,.T.);+#225=VERTEX_POINT('',#226);+#226=CARTESIAN_POINT('',(-5.08,1.075,0.8));+#227=ORIENTED_EDGE('',*,*,#228,.F.);+#228=EDGE_CURVE('',#229,#225,#149,.T.);+#229=VERTEX_POINT('',#230);+#230=CARTESIAN_POINT('',(-5.08,0.525,0.8));+#231=ORIENTED_EDGE('',*,*,#232,.F.);+#232=EDGE_CURVE('',#233,#229,#149,.T.);+#233=VERTEX_POINT('',#234);+#234=CARTESIAN_POINT('',(-5.08,0.275,0.8));+#235=ORIENTED_EDGE('',*,*,#236,.F.);+#236=EDGE_CURVE('',#237,#233,#149,.T.);+#237=VERTEX_POINT('',#238);+#238=CARTESIAN_POINT('',(-5.08,-0.275,0.8));+#239=ORIENTED_EDGE('',*,*,#240,.F.);+#240=EDGE_CURVE('',#241,#237,#149,.T.);+#241=VERTEX_POINT('',#242);+#242=CARTESIAN_POINT('',(-5.08,-0.525,0.8));+#243=ORIENTED_EDGE('',*,*,#244,.F.);+#244=EDGE_CURVE('',#245,#241,#149,.T.);+#245=VERTEX_POINT('',#246);+#246=CARTESIAN_POINT('',(-5.08,-1.075,0.8));+#247=ORIENTED_EDGE('',*,*,#248,.F.);+#248=EDGE_CURVE('',#249,#245,#149,.T.);+#249=VERTEX_POINT('',#250);+#250=CARTESIAN_POINT('',(-5.08,-1.325,0.8));+#251=ORIENTED_EDGE('',*,*,#252,.F.);+#252=EDGE_CURVE('',#253,#249,#149,.T.);+#253=VERTEX_POINT('',#254);+#254=CARTESIAN_POINT('',(-5.08,-1.875,0.8));+#255=ORIENTED_EDGE('',*,*,#256,.F.);+#256=EDGE_CURVE('',#257,#253,#149,.T.);+#257=VERTEX_POINT('',#258);+#258=CARTESIAN_POINT('',(-5.08,-2.125,0.8));+#259=ORIENTED_EDGE('',*,*,#260,.F.);+#260=EDGE_CURVE('',#261,#257,#149,.T.);+#261=VERTEX_POINT('',#262);+#262=CARTESIAN_POINT('',(-5.08,-2.675,0.8));+#263=ORIENTED_EDGE('',*,*,#264,.F.);+#264=EDGE_CURVE('',#265,#261,#149,.T.);+#265=VERTEX_POINT('',#266);+#266=CARTESIAN_POINT('',(-5.08,-2.925,0.8));+#267=ORIENTED_EDGE('',*,*,#268,.F.);+#268=EDGE_CURVE('',#269,#265,#149,.T.);+#269=VERTEX_POINT('',#270);+#270=CARTESIAN_POINT('',(-5.08,-3.475,0.8));+#271=ORIENTED_EDGE('',*,*,#272,.F.);+#272=EDGE_CURVE('',#273,#269,#149,.T.);+#273=VERTEX_POINT('',#274);+#274=CARTESIAN_POINT('',(-5.08,-3.725,0.8));+#275=ORIENTED_EDGE('',*,*,#276,.F.);+#276=EDGE_CURVE('',#277,#273,#149,.T.);+#277=VERTEX_POINT('',#278);+#278=CARTESIAN_POINT('',(-5.08,-4.275,0.8));+#279=ORIENTED_EDGE('',*,*,#280,.F.);+#280=EDGE_CURVE('',#281,#277,#149,.T.);+#281=VERTEX_POINT('',#282);+#282=CARTESIAN_POINT('',(-5.08,-4.525,0.8));+#283=ORIENTED_EDGE('',*,*,#284,.F.);+#284=EDGE_CURVE('',#285,#281,#149,.T.);+#285=VERTEX_POINT('',#286);+#286=CARTESIAN_POINT('',(-5.08,-5.075,0.8));+#287=ORIENTED_EDGE('',*,*,#288,.F.);+#288=EDGE_CURVE('',#289,#285,#149,.T.);+#289=VERTEX_POINT('',#290);+#290=CARTESIAN_POINT('',(-5.08,-5.325,0.8));+#291=ORIENTED_EDGE('',*,*,#292,.F.);+#292=EDGE_CURVE('',#293,#289,#149,.T.);+#293=VERTEX_POINT('',#294);+#294=CARTESIAN_POINT('',(-5.08,-5.875,0.8));+#295=ORIENTED_EDGE('',*,*,#296,.F.);+#296=EDGE_CURVE('',#297,#293,#149,.T.);+#297=VERTEX_POINT('',#298);+#298=CARTESIAN_POINT('',(-5.08,-6.125,0.8));+#299=ORIENTED_EDGE('',*,*,#300,.F.);+#300=EDGE_CURVE('',#301,#297,#149,.T.);+#301=VERTEX_POINT('',#302);+#302=CARTESIAN_POINT('',(-5.08,-6.675,0.8));+#303=ORIENTED_EDGE('',*,*,#304,.F.);+#304=EDGE_CURVE('',#305,#301,#149,.T.);+#305=VERTEX_POINT('',#306);+#306=CARTESIAN_POINT('',(-5.08,-6.925,0.8));+#307=ORIENTED_EDGE('',*,*,#308,.F.);+#308=EDGE_CURVE('',#309,#305,#149,.T.);+#309=VERTEX_POINT('',#310);+#310=CARTESIAN_POINT('',(-5.08,-7.475,0.8));+#311=ORIENTED_EDGE('',*,*,#312,.F.);+#312=EDGE_CURVE('',#313,#309,#149,.T.);+#313=VERTEX_POINT('',#314);+#314=CARTESIAN_POINT('',(-5.08,-7.725,0.8));+#315=ORIENTED_EDGE('',*,*,#316,.F.);+#316=EDGE_CURVE('',#317,#313,#149,.T.);+#317=VERTEX_POINT('',#318);+#318=CARTESIAN_POINT('',(-5.08,-8.275,0.8));+#319=ORIENTED_EDGE('',*,*,#320,.F.);+#320=EDGE_CURVE('',#321,#317,#149,.T.);+#321=VERTEX_POINT('',#322);+#322=CARTESIAN_POINT('',(-5.08,-8.525,0.8));+#323=ORIENTED_EDGE('',*,*,#324,.F.);+#324=EDGE_CURVE('',#325,#321,#149,.T.);+#325=VERTEX_POINT('',#150);+#326=ORIENTED_EDGE('',*,*,#327,.F.);+#327=EDGE_CURVE('',#76,#325,#328,.T.);+#328=B_SPLINE_CURVE_WITH_KNOTS('',1,(#77,#150),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#329=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#77,#150),(#84,#135)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,18.06),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#330=ADVANCED_FACE('',(#331),#518,.F.);+#331=FACE_BOUND('',#332,.F.);+#332=EDGE_LOOP('',(#53,#333,#338,#343,#347,#351,#355,#359,#363,#367,#371,#375,#379,#383,#387,#391,#395,#399,#403,#407,#411,#415,#419,#423,#427,#431,#435,#439,#443,#447,#451,#455,#459,#463,#467,#471,#475,#479,#483,#487,#491,#495,#499,#503,#507,#511,#515,#517));+#333=ORIENTED_EDGE('',*,*,#334,.T.);+#334=EDGE_CURVE('',#55,#335,#337,.T.);+#335=VERTEX_POINT('',#336);+#336=CARTESIAN_POINT('',(5.08,-9.03,0.8));+#337=B_SPLINE_CURVE_WITH_KNOTS('',1,(#56,#336),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#338=ORIENTED_EDGE('',*,*,#339,.F.);+#339=EDGE_CURVE('',#340,#335,#342,.T.);+#340=VERTEX_POINT('',#341);+#341=CARTESIAN_POINT('',(5.08,-8.525,0.8));+#342=LINE('',#102,#58);+#343=ORIENTED_EDGE('',*,*,#344,.F.);+#344=EDGE_CURVE('',#345,#340,#342,.T.);+#345=VERTEX_POINT('',#346);+#346=CARTESIAN_POINT('',(5.08,-8.275,0.8));+#347=ORIENTED_EDGE('',*,*,#348,.F.);+#348=EDGE_CURVE('',#349,#345,#342,.T.);+#349=VERTEX_POINT('',#350);+#350=CARTESIAN_POINT('',(5.08,-7.725,0.8));+#351=ORIENTED_EDGE('',*,*,#352,.F.);+#352=EDGE_CURVE('',#353,#349,#342,.T.);+#353=VERTEX_POINT('',#354);+#354=CARTESIAN_POINT('',(5.08,-7.475,0.8));+#355=ORIENTED_EDGE('',*,*,#356,.F.);+#356=EDGE_CURVE('',#357,#353,#342,.T.);+#357=VERTEX_POINT('',#358);+#358=CARTESIAN_POINT('',(5.08,-6.925,0.8));+#359=ORIENTED_EDGE('',*,*,#360,.F.);+#360=EDGE_CURVE('',#361,#357,#342,.T.);+#361=VERTEX_POINT('',#362);+#362=CARTESIAN_POINT('',(5.08,-6.675,0.8));+#363=ORIENTED_EDGE('',*,*,#364,.F.);+#364=EDGE_CURVE('',#365,#361,#342,.T.);+#365=VERTEX_POINT('',#366);+#366=CARTESIAN_POINT('',(5.08,-6.125,0.8));+#367=ORIENTED_EDGE('',*,*,#368,.F.);+#368=EDGE_CURVE('',#369,#365,#342,.T.);+#369=VERTEX_POINT('',#370);+#370=CARTESIAN_POINT('',(5.08,-5.875,0.8));+#371=ORIENTED_EDGE('',*,*,#372,.F.);+#372=EDGE_CURVE('',#373,#369,#342,.T.);+#373=VERTEX_POINT('',#374);+#374=CARTESIAN_POINT('',(5.08,-5.325,0.8));+#375=ORIENTED_EDGE('',*,*,#376,.F.);+#376=EDGE_CURVE('',#377,#373,#342,.T.);+#377=VERTEX_POINT('',#378);+#378=CARTESIAN_POINT('',(5.08,-5.075,0.8));+#379=ORIENTED_EDGE('',*,*,#380,.F.);+#380=EDGE_CURVE('',#381,#377,#342,.T.);+#381=VERTEX_POINT('',#382);+#382=CARTESIAN_POINT('',(5.08,-4.525,0.8));+#383=ORIENTED_EDGE('',*,*,#384,.F.);+#384=EDGE_CURVE('',#385,#381,#342,.T.);+#385=VERTEX_POINT('',#386);+#386=CARTESIAN_POINT('',(5.08,-4.275,0.8));+#387=ORIENTED_EDGE('',*,*,#388,.F.);+#388=EDGE_CURVE('',#389,#385,#342,.T.);+#389=VERTEX_POINT('',#390);+#390=CARTESIAN_POINT('',(5.08,-3.725,0.8));+#391=ORIENTED_EDGE('',*,*,#392,.F.);+#392=EDGE_CURVE('',#393,#389,#342,.T.);+#393=VERTEX_POINT('',#394);+#394=CARTESIAN_POINT('',(5.08,-3.475,0.8));+#395=ORIENTED_EDGE('',*,*,#396,.F.);+#396=EDGE_CURVE('',#397,#393,#342,.T.);+#397=VERTEX_POINT('',#398);+#398=CARTESIAN_POINT('',(5.08,-2.925,0.8));+#399=ORIENTED_EDGE('',*,*,#400,.F.);+#400=EDGE_CURVE('',#401,#397,#342,.T.);+#401=VERTEX_POINT('',#402);+#402=CARTESIAN_POINT('',(5.08,-2.675,0.8));+#403=ORIENTED_EDGE('',*,*,#404,.F.);+#404=EDGE_CURVE('',#405,#401,#342,.T.);+#405=VERTEX_POINT('',#406);+#406=CARTESIAN_POINT('',(5.08,-2.125,0.8));+#407=ORIENTED_EDGE('',*,*,#408,.F.);+#408=EDGE_CURVE('',#409,#405,#342,.T.);+#409=VERTEX_POINT('',#410);+#410=CARTESIAN_POINT('',(5.08,-1.875,0.8));+#411=ORIENTED_EDGE('',*,*,#412,.F.);+#412=EDGE_CURVE('',#413,#409,#342,.T.);+#413=VERTEX_POINT('',#414);+#414=CARTESIAN_POINT('',(5.08,-1.325,0.8));+#415=ORIENTED_EDGE('',*,*,#416,.F.);+#416=EDGE_CURVE('',#417,#413,#342,.T.);+#417=VERTEX_POINT('',#418);+#418=CARTESIAN_POINT('',(5.08,-1.075,0.8));+#419=ORIENTED_EDGE('',*,*,#420,.F.);+#420=EDGE_CURVE('',#421,#417,#342,.T.);+#421=VERTEX_POINT('',#422);+#422=CARTESIAN_POINT('',(5.08,-0.525,0.8));+#423=ORIENTED_EDGE('',*,*,#424,.F.);+#424=EDGE_CURVE('',#425,#421,#342,.T.);+#425=VERTEX_POINT('',#426);+#426=CARTESIAN_POINT('',(5.08,-0.275,0.8));+#427=ORIENTED_EDGE('',*,*,#428,.F.);+#428=EDGE_CURVE('',#429,#425,#342,.T.);+#429=VERTEX_POINT('',#430);+#430=CARTESIAN_POINT('',(5.08,0.275,0.8));+#431=ORIENTED_EDGE('',*,*,#432,.F.);+#432=EDGE_CURVE('',#433,#429,#342,.T.);+#433=VERTEX_POINT('',#434);+#434=CARTESIAN_POINT('',(5.08,0.525,0.8));+#435=ORIENTED_EDGE('',*,*,#436,.F.);+#436=EDGE_CURVE('',#437,#433,#342,.T.);+#437=VERTEX_POINT('',#438);+#438=CARTESIAN_POINT('',(5.08,1.075,0.8));+#439=ORIENTED_EDGE('',*,*,#440,.F.);+#440=EDGE_CURVE('',#441,#437,#342,.T.);+#441=VERTEX_POINT('',#442);+#442=CARTESIAN_POINT('',(5.08,1.325,0.8));+#443=ORIENTED_EDGE('',*,*,#444,.F.);+#444=EDGE_CURVE('',#445,#441,#342,.T.);+#445=VERTEX_POINT('',#446);+#446=CARTESIAN_POINT('',(5.08,1.875,0.8));+#447=ORIENTED_EDGE('',*,*,#448,.F.);+#448=EDGE_CURVE('',#449,#445,#342,.T.);+#449=VERTEX_POINT('',#450);+#450=CARTESIAN_POINT('',(5.08,2.125,0.8));+#451=ORIENTED_EDGE('',*,*,#452,.F.);+#452=EDGE_CURVE('',#453,#449,#342,.T.);+#453=VERTEX_POINT('',#454);+#454=CARTESIAN_POINT('',(5.08,2.675,0.8));+#455=ORIENTED_EDGE('',*,*,#456,.F.);+#456=EDGE_CURVE('',#457,#453,#342,.T.);+#457=VERTEX_POINT('',#458);+#458=CARTESIAN_POINT('',(5.08,2.925,0.8));+#459=ORIENTED_EDGE('',*,*,#460,.F.);+#460=EDGE_CURVE('',#461,#457,#342,.T.);+#461=VERTEX_POINT('',#462);+#462=CARTESIAN_POINT('',(5.08,3.475,0.8));+#463=ORIENTED_EDGE('',*,*,#464,.F.);+#464=EDGE_CURVE('',#465,#461,#342,.T.);+#465=VERTEX_POINT('',#466);+#466=CARTESIAN_POINT('',(5.08,3.725,0.8));+#467=ORIENTED_EDGE('',*,*,#468,.F.);+#468=EDGE_CURVE('',#469,#465,#342,.T.);+#469=VERTEX_POINT('',#470);+#470=CARTESIAN_POINT('',(5.08,4.275,0.8));+#471=ORIENTED_EDGE('',*,*,#472,.F.);+#472=EDGE_CURVE('',#473,#469,#342,.T.);+#473=VERTEX_POINT('',#474);+#474=CARTESIAN_POINT('',(5.08,4.525,0.8));+#475=ORIENTED_EDGE('',*,*,#476,.F.);+#476=EDGE_CURVE('',#477,#473,#342,.T.);+#477=VERTEX_POINT('',#478);+#478=CARTESIAN_POINT('',(5.08,5.075,0.8));+#479=ORIENTED_EDGE('',*,*,#480,.F.);+#480=EDGE_CURVE('',#481,#477,#342,.T.);+#481=VERTEX_POINT('',#482);+#482=CARTESIAN_POINT('',(5.08,5.325,0.8));+#483=ORIENTED_EDGE('',*,*,#484,.F.);+#484=EDGE_CURVE('',#485,#481,#342,.T.);+#485=VERTEX_POINT('',#486);+#486=CARTESIAN_POINT('',(5.08,5.875,0.8));+#487=ORIENTED_EDGE('',*,*,#488,.F.);+#488=EDGE_CURVE('',#489,#485,#342,.T.);+#489=VERTEX_POINT('',#490);+#490=CARTESIAN_POINT('',(5.08,6.125,0.8));+#491=ORIENTED_EDGE('',*,*,#492,.F.);+#492=EDGE_CURVE('',#493,#489,#342,.T.);+#493=VERTEX_POINT('',#494);+#494=CARTESIAN_POINT('',(5.08,6.675,0.8));+#495=ORIENTED_EDGE('',*,*,#496,.F.);+#496=EDGE_CURVE('',#497,#493,#342,.T.);+#497=VERTEX_POINT('',#498);+#498=CARTESIAN_POINT('',(5.08,6.925,0.8));+#499=ORIENTED_EDGE('',*,*,#500,.F.);+#500=EDGE_CURVE('',#501,#497,#342,.T.);+#501=VERTEX_POINT('',#502);+#502=CARTESIAN_POINT('',(5.08,7.475,0.8));+#503=ORIENTED_EDGE('',*,*,#504,.F.);+#504=EDGE_CURVE('',#505,#501,#342,.T.);+#505=VERTEX_POINT('',#506);+#506=CARTESIAN_POINT('',(5.08,7.725,0.8));+#507=ORIENTED_EDGE('',*,*,#508,.F.);+#508=EDGE_CURVE('',#509,#505,#342,.T.);+#509=VERTEX_POINT('',#510);+#510=CARTESIAN_POINT('',(5.08,8.275,0.8));+#511=ORIENTED_EDGE('',*,*,#512,.F.);+#512=EDGE_CURVE('',#513,#509,#342,.T.);+#513=VERTEX_POINT('',#514);+#514=CARTESIAN_POINT('',(5.08,8.525,0.8));+#515=ORIENTED_EDGE('',*,*,#516,.F.);+#516=EDGE_CURVE('',#101,#513,#342,.T.);+#517=ORIENTED_EDGE('',*,*,#100,.F.);+#518=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#49,#102),(#56,#336)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,18.06),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#519=ADVANCED_FACE('',(#520),#531,.F.);+#520=FACE_BOUND('',#521,.F.);+#521=EDGE_LOOP('',(#74,#522,#523,#528));+#522=ORIENTED_EDGE('',*,*,#327,.T.);+#523=ORIENTED_EDGE('',*,*,#524,.F.);+#524=EDGE_CURVE('',#525,#325,#527,.T.);+#525=VERTEX_POINT('',#526);+#526=CARTESIAN_POINT('',(-4.905,-9.205,0.8));+#527=LINE('',#526,#79);+#528=ORIENTED_EDGE('',*,*,#529,.F.);+#529=EDGE_CURVE('',#69,#525,#530,.T.);+#530=B_SPLINE_CURVE_WITH_KNOTS('',1,(#70,#526),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#531=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#70,#526),(#77,#150)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#532=ADVANCED_FACE('',(#533),#544,.F.);+#533=FACE_BOUND('',#534,.F.);+#534=EDGE_LOOP('',(#60,#535,#540,#543));+#535=ORIENTED_EDGE('',*,*,#536,.T.);+#536=EDGE_CURVE('',#62,#537,#539,.T.);+#537=VERTEX_POINT('',#538);+#538=CARTESIAN_POINT('',(4.905,-9.205,0.8));+#539=B_SPLINE_CURVE_WITH_KNOTS('',1,(#63,#538),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#540=ORIENTED_EDGE('',*,*,#541,.F.);+#541=EDGE_CURVE('',#335,#537,#542,.T.);+#542=LINE('',#336,#65);+#543=ORIENTED_EDGE('',*,*,#334,.F.);+#544=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#56,#336),(#63,#538)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#545=ADVANCED_FACE('',(#546),#553,.F.);+#546=FACE_BOUND('',#547,.F.);+#547=EDGE_LOOP('',(#67,#548,#549,#552));+#548=ORIENTED_EDGE('',*,*,#529,.T.);+#549=ORIENTED_EDGE('',*,*,#550,.F.);+#550=EDGE_CURVE('',#537,#525,#551,.T.);+#551=LINE('',#538,#72);+#552=ORIENTED_EDGE('',*,*,#536,.F.);+#553=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#63,#538),(#70,#526)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.81),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#554=ADVANCED_FACE('',(#555),#567,.F.);+#555=FACE_BOUND('',#556,.F.);+#556=EDGE_LOOP('',(#557,#558,#563,#566));+#557=ORIENTED_EDGE('',*,*,#105,.T.);+#558=ORIENTED_EDGE('',*,*,#559,.T.);+#559=EDGE_CURVE('',#101,#560,#562,.T.);+#560=VERTEX_POINT('',#561);+#561=CARTESIAN_POINT('',(5.08,9.03,0.9));+#562=B_SPLINE_CURVE_WITH_KNOTS('',1,(#102,#561),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#563=ORIENTED_EDGE('',*,*,#564,.F.);+#564=EDGE_CURVE('',#115,#560,#565,.T.);+#565=LINE('',#116,#51);+#566=ORIENTED_EDGE('',*,*,#114,.F.);+#567=PLANE('',#568);+#568=AXIS2_PLACEMENT_3D('',#116,#66,#52);+#569=ADVANCED_FACE('',(#570),#628,.F.);+#570=FACE_BOUND('',#571,.F.);+#571=EDGE_LOOP('',(#572,#577,#578,#579,#584,#590,#595,#600,#605,#610,#616,#624));+#572=ORIENTED_EDGE('',*,*,#573,.T.);+#573=EDGE_CURVE('',#574,#120,#576,.T.);+#574=VERTEX_POINT('',#575);+#575=CARTESIAN_POINT('',(-5.08,9.03,0.9));+#576=LINE('',#575,#91);+#577=ORIENTED_EDGE('',*,*,#119,.T.);+#578=ORIENTED_EDGE('',*,*,#564,.T.);+#579=ORIENTED_EDGE('',*,*,#580,.T.);+#580=EDGE_CURVE('',#560,#581,#583,.T.);+#581=VERTEX_POINT('',#582);+#582=CARTESIAN_POINT('',(5.08,8.525,0.9));+#583=LINE('',#561,#58);+#584=ORIENTED_EDGE('',*,*,#585,.T.);+#585=EDGE_CURVE('',#581,#586,#588,.T.);+#586=VERTEX_POINT('',#587);+#587=CARTESIAN_POINT('',(5.005,8.525,0.9));+#588=LINE('',#589,#72);+#589=CARTESIAN_POINT('',(5.18,8.525,0.9));+#590=ORIENTED_EDGE('',*,*,#591,.F.);+#591=EDGE_CURVE('',#592,#586,#594,.T.);+#592=VERTEX_POINT('',#593);+#593=CARTESIAN_POINT('',(5.005,8.9925,0.9));+#594=LINE('',#593,#58);+#595=ORIENTED_EDGE('',*,*,#596,.F.);+#596=EDGE_CURVE('',#597,#592,#599,.T.);+#597=VERTEX_POINT('',#598);+#598=CARTESIAN_POINT('',(4.8675,9.13,0.9));+#599=LINE('',#598,#51);+#600=ORIENTED_EDGE('',*,*,#601,.F.);+#601=EDGE_CURVE('',#602,#597,#604,.T.);+#602=VERTEX_POINT('',#603);+#603=CARTESIAN_POINT('',(-4.8675,9.13,0.9));+#604=LINE('',#603,#27);+#605=ORIENTED_EDGE('',*,*,#606,.F.);+#606=EDGE_CURVE('',#607,#602,#609,.T.);+#607=VERTEX_POINT('',#608);+#608=CARTESIAN_POINT('',(-5.005,8.9925,0.9));+#609=LINE('',#608,#91);+#610=ORIENTED_EDGE('',*,*,#611,.F.);+#611=EDGE_CURVE('',#612,#607,#614,.T.);+#612=VERTEX_POINT('',#613);+#613=CARTESIAN_POINT('',(-5.005,8.525,0.9));+#614=LINE('',#615,#86);+#615=CARTESIAN_POINT('',(-5.005,-8.9925,0.9));+#616=ORIENTED_EDGE('',*,*,#617,.F.);+#617=EDGE_CURVE('',#618,#612,#620,.T.);+#618=VERTEX_POINT('',#619);+#619=CARTESIAN_POINT('',(-5.08,8.525,0.9));+#620=LINE('',#621,#622);+#621=CARTESIAN_POINT('',(-5.18,8.525,0.9));+#622=VECTOR('',#623,1.);+#623=DIRECTION('',(1.,-1.144237745222E-17,0.));+#624=ORIENTED_EDGE('',*,*,#625,.T.);+#625=EDGE_CURVE('',#618,#574,#626,.T.);+#626=LINE('',#627,#86);+#627=CARTESIAN_POINT('',(-5.08,-9.03,0.9));+#628=PLANE('',#629);+#629=AXIS2_PLACEMENT_3D('',#630,#631,#632);+#630=CARTESIAN_POINT('',(-1.105880768043E-15,9.1675,0.9));+#631=DIRECTION('',(1.638371515562E-32,1.070938441027E-26,-1.));+#632=DIRECTION('',(1.,1.110463226577E-16,1.638371515681E-32));+#633=ADVANCED_FACE('',(#634),#642,.F.);+#634=FACE_BOUND('',#635,.F.);+#635=EDGE_LOOP('',(#636,#637,#638,#639));+#636=ORIENTED_EDGE('',*,*,#133,.T.);+#637=ORIENTED_EDGE('',*,*,#124,.T.);+#638=ORIENTED_EDGE('',*,*,#573,.F.);+#639=ORIENTED_EDGE('',*,*,#640,.F.);+#640=EDGE_CURVE('',#134,#574,#641,.T.);+#641=B_SPLINE_CURVE_WITH_KNOTS('',1,(#135,#575),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#642=PLANE('',#643);+#643=AXIS2_PLACEMENT_3D('',#575,#52,#92);+#644=ADVANCED_FACE('',(#645),#661,.F.);+#645=FACE_BOUND('',#646,.F.);+#646=EDGE_LOOP('',(#647,#651,#652,#659));+#647=ORIENTED_EDGE('',*,*,#648,.F.);+#648=EDGE_CURVE('',#325,#649,#650,.T.);+#649=VERTEX_POINT('',#627);+#650=B_SPLINE_CURVE_WITH_KNOTS('',1,(#150,#627),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#651=ORIENTED_EDGE('',*,*,#324,.T.);+#652=ORIENTED_EDGE('',*,*,#653,.T.);+#653=EDGE_CURVE('',#321,#654,#656,.T.);+#654=VERTEX_POINT('',#655);+#655=CARTESIAN_POINT('',(-5.08,-8.525,0.9));+#656=LINE('',#657,#658);+#657=CARTESIAN_POINT('',(-5.08,-8.525,0.673508101453));+#658=VECTOR('',#13,1.);+#659=ORIENTED_EDGE('',*,*,#660,.F.);+#660=EDGE_CURVE('',#649,#654,#626,.T.);+#661=PLANE('',#662);+#662=AXIS2_PLACEMENT_3D('',#627,#28,#87);+#663=ADVANCED_FACE('',(#664),#686,.F.);+#664=FACE_BOUND('',#665,.F.);+#665=EDGE_LOOP('',(#666,#674,#675,#681));+#666=ORIENTED_EDGE('',*,*,#667,.F.);+#667=EDGE_CURVE('',#321,#668,#670,.T.);+#668=VERTEX_POINT('',#669);+#669=CARTESIAN_POINT('',(-5.18,-8.525,0.8));+#670=LINE('',#671,#672);+#671=CARTESIAN_POINT('',(-4.93,-8.525,0.8));+#672=VECTOR('',#673,1.);+#673=DIRECTION('',(-1.,1.144237745222E-17,0.));+#674=ORIENTED_EDGE('',*,*,#320,.T.);+#675=ORIENTED_EDGE('',*,*,#676,.T.);+#676=EDGE_CURVE('',#317,#677,#679,.T.);+#677=VERTEX_POINT('',#678);+#678=CARTESIAN_POINT('',(-5.18,-8.275,0.8));+#679=LINE('',#680,#672);+#680=CARTESIAN_POINT('',(-4.93,-8.275,0.8));+#681=ORIENTED_EDGE('',*,*,#682,.F.);+#682=EDGE_CURVE('',#668,#677,#683,.T.);+#683=LINE('',#669,#684);+#684=VECTOR('',#685,1.);+#685=DIRECTION('',(1.144237745222E-17,1.,0.));+#686=PLANE('',#687);+#687=AXIS2_PLACEMENT_3D('',#671,#13,#673);+#688=ADVANCED_FACE('',(#689),#661,.F.);+#689=FACE_BOUND('',#690,.F.);+#690=EDGE_LOOP('',(#691,#697,#698,#704));+#691=ORIENTED_EDGE('',*,*,#692,.F.);+#692=EDGE_CURVE('',#317,#693,#695,.T.);+#693=VERTEX_POINT('',#694);+#694=CARTESIAN_POINT('',(-5.08,-8.275,0.9));+#695=LINE('',#696,#658);+#696=CARTESIAN_POINT('',(-5.08,-8.275,0.673508101453));+#697=ORIENTED_EDGE('',*,*,#316,.T.);+#698=ORIENTED_EDGE('',*,*,#699,.T.);+#699=EDGE_CURVE('',#313,#700,#702,.T.);+#700=VERTEX_POINT('',#701);+#701=CARTESIAN_POINT('',(-5.08,-7.725,0.9));+#702=LINE('',#703,#658);+#703=CARTESIAN_POINT('',(-5.08,-7.725,0.673508101453));+#704=ORIENTED_EDGE('',*,*,#705,.F.);+#705=EDGE_CURVE('',#693,#700,#626,.T.);+#706=ADVANCED_FACE('',(#707),#725,.F.);+#707=FACE_BOUND('',#708,.F.);+#708=EDGE_LOOP('',(#709,#715,#716,#722));+#709=ORIENTED_EDGE('',*,*,#710,.F.);+#710=EDGE_CURVE('',#313,#711,#713,.T.);+#711=VERTEX_POINT('',#712);+#712=CARTESIAN_POINT('',(-5.18,-7.725,0.8));+#713=LINE('',#714,#672);+#714=CARTESIAN_POINT('',(-4.93,-7.725,0.8));+#715=ORIENTED_EDGE('',*,*,#312,.T.);+#716=ORIENTED_EDGE('',*,*,#717,.T.);+#717=EDGE_CURVE('',#309,#718,#720,.T.);+#718=VERTEX_POINT('',#719);+#719=CARTESIAN_POINT('',(-5.18,-7.475,0.8));+#720=LINE('',#721,#672);+#721=CARTESIAN_POINT('',(-4.93,-7.475,0.8));+#722=ORIENTED_EDGE('',*,*,#723,.F.);+#723=EDGE_CURVE('',#711,#718,#724,.T.);+#724=LINE('',#712,#684);+#725=PLANE('',#726);+#726=AXIS2_PLACEMENT_3D('',#714,#13,#673);+#727=ADVANCED_FACE('',(#728),#661,.F.);+#728=FACE_BOUND('',#729,.F.);+#729=EDGE_LOOP('',(#730,#736,#737,#743));+#730=ORIENTED_EDGE('',*,*,#731,.F.);+#731=EDGE_CURVE('',#309,#732,#734,.T.);+#732=VERTEX_POINT('',#733);+#733=CARTESIAN_POINT('',(-5.08,-7.475,0.9));+#734=LINE('',#735,#658);+#735=CARTESIAN_POINT('',(-5.08,-7.475,0.673508101453));+#736=ORIENTED_EDGE('',*,*,#308,.T.);+#737=ORIENTED_EDGE('',*,*,#738,.T.);+#738=EDGE_CURVE('',#305,#739,#741,.T.);+#739=VERTEX_POINT('',#740);+#740=CARTESIAN_POINT('',(-5.08,-6.925,0.9));+#741=LINE('',#742,#658);+#742=CARTESIAN_POINT('',(-5.08,-6.925,0.673508101453));+#743=ORIENTED_EDGE('',*,*,#744,.F.);+#744=EDGE_CURVE('',#732,#739,#626,.T.);+#745=ADVANCED_FACE('',(#746),#764,.F.);+#746=FACE_BOUND('',#747,.F.);+#747=EDGE_LOOP('',(#748,#754,#755,#761));+#748=ORIENTED_EDGE('',*,*,#749,.F.);+#749=EDGE_CURVE('',#305,#750,#752,.T.);+#750=VERTEX_POINT('',#751);+#751=CARTESIAN_POINT('',(-5.18,-6.925,0.8));+#752=LINE('',#753,#672);+#753=CARTESIAN_POINT('',(-4.93,-6.925,0.8));+#754=ORIENTED_EDGE('',*,*,#304,.T.);+#755=ORIENTED_EDGE('',*,*,#756,.T.);+#756=EDGE_CURVE('',#301,#757,#759,.T.);+#757=VERTEX_POINT('',#758);+#758=CARTESIAN_POINT('',(-5.18,-6.675,0.8));+#759=LINE('',#760,#672);+#760=CARTESIAN_POINT('',(-4.93,-6.675,0.8));+#761=ORIENTED_EDGE('',*,*,#762,.F.);+#762=EDGE_CURVE('',#750,#757,#763,.T.);+#763=LINE('',#751,#684);+#764=PLANE('',#765);+#765=AXIS2_PLACEMENT_3D('',#753,#13,#673);+#766=ADVANCED_FACE('',(#767),#661,.F.);+#767=FACE_BOUND('',#768,.F.);+#768=EDGE_LOOP('',(#769,#775,#776,#782));+#769=ORIENTED_EDGE('',*,*,#770,.F.);+#770=EDGE_CURVE('',#301,#771,#773,.T.);+#771=VERTEX_POINT('',#772);+#772=CARTESIAN_POINT('',(-5.08,-6.675,0.9));+#773=LINE('',#774,#658);+#774=CARTESIAN_POINT('',(-5.08,-6.675,0.673508101453));+#775=ORIENTED_EDGE('',*,*,#300,.T.);+#776=ORIENTED_EDGE('',*,*,#777,.T.);+#777=EDGE_CURVE('',#297,#778,#780,.T.);+#778=VERTEX_POINT('',#779);+#779=CARTESIAN_POINT('',(-5.08,-6.125,0.9));+#780=LINE('',#781,#658);+#781=CARTESIAN_POINT('',(-5.08,-6.125,0.673508101453));+#782=ORIENTED_EDGE('',*,*,#783,.F.);+#783=EDGE_CURVE('',#771,#778,#626,.T.);+#784=ADVANCED_FACE('',(#785),#803,.F.);+#785=FACE_BOUND('',#786,.F.);+#786=EDGE_LOOP('',(#787,#793,#794,#800));+#787=ORIENTED_EDGE('',*,*,#788,.F.);+#788=EDGE_CURVE('',#297,#789,#791,.T.);+#789=VERTEX_POINT('',#790);+#790=CARTESIAN_POINT('',(-5.18,-6.125,0.8));+#791=LINE('',#792,#672);+#792=CARTESIAN_POINT('',(-4.93,-6.125,0.8));+#793=ORIENTED_EDGE('',*,*,#296,.T.);+#794=ORIENTED_EDGE('',*,*,#795,.T.);+#795=EDGE_CURVE('',#293,#796,#798,.T.);+#796=VERTEX_POINT('',#797);+#797=CARTESIAN_POINT('',(-5.18,-5.875,0.8));+#798=LINE('',#799,#672);+#799=CARTESIAN_POINT('',(-4.93,-5.875,0.8));+#800=ORIENTED_EDGE('',*,*,#801,.F.);+#801=EDGE_CURVE('',#789,#796,#802,.T.);+#802=LINE('',#790,#684);+#803=PLANE('',#804);+#804=AXIS2_PLACEMENT_3D('',#792,#13,#673);+#805=ADVANCED_FACE('',(#806),#661,.F.);+#806=FACE_BOUND('',#807,.F.);+#807=EDGE_LOOP('',(#808,#814,#815,#821));+#808=ORIENTED_EDGE('',*,*,#809,.F.);+#809=EDGE_CURVE('',#293,#810,#812,.T.);+#810=VERTEX_POINT('',#811);+#811=CARTESIAN_POINT('',(-5.08,-5.875,0.9));+#812=LINE('',#813,#658);+#813=CARTESIAN_POINT('',(-5.08,-5.875,0.673508101453));+#814=ORIENTED_EDGE('',*,*,#292,.T.);+#815=ORIENTED_EDGE('',*,*,#816,.T.);+#816=EDGE_CURVE('',#289,#817,#819,.T.);+#817=VERTEX_POINT('',#818);+#818=CARTESIAN_POINT('',(-5.08,-5.325,0.9));+#819=LINE('',#820,#658);+#820=CARTESIAN_POINT('',(-5.08,-5.325,0.673508101453));+#821=ORIENTED_EDGE('',*,*,#822,.F.);+#822=EDGE_CURVE('',#810,#817,#626,.T.);+#823=ADVANCED_FACE('',(#824),#842,.F.);+#824=FACE_BOUND('',#825,.F.);+#825=EDGE_LOOP('',(#826,#832,#833,#839));+#826=ORIENTED_EDGE('',*,*,#827,.F.);+#827=EDGE_CURVE('',#289,#828,#830,.T.);+#828=VERTEX_POINT('',#829);+#829=CARTESIAN_POINT('',(-5.18,-5.325,0.8));+#830=LINE('',#831,#672);+#831=CARTESIAN_POINT('',(-4.93,-5.325,0.8));+#832=ORIENTED_EDGE('',*,*,#288,.T.);+#833=ORIENTED_EDGE('',*,*,#834,.T.);+#834=EDGE_CURVE('',#285,#835,#837,.T.);+#835=VERTEX_POINT('',#836);+#836=CARTESIAN_POINT('',(-5.18,-5.075,0.8));+#837=LINE('',#838,#672);+#838=CARTESIAN_POINT('',(-4.93,-5.075,0.8));+#839=ORIENTED_EDGE('',*,*,#840,.F.);+#840=EDGE_CURVE('',#828,#835,#841,.T.);+#841=LINE('',#829,#684);+#842=PLANE('',#843);+#843=AXIS2_PLACEMENT_3D('',#831,#13,#673);+#844=ADVANCED_FACE('',(#845),#661,.F.);+#845=FACE_BOUND('',#846,.F.);+#846=EDGE_LOOP('',(#847,#853,#854,#860));+#847=ORIENTED_EDGE('',*,*,#848,.F.);+#848=EDGE_CURVE('',#285,#849,#851,.T.);+#849=VERTEX_POINT('',#850);+#850=CARTESIAN_POINT('',(-5.08,-5.075,0.9));+#851=LINE('',#852,#658);+#852=CARTESIAN_POINT('',(-5.08,-5.075,0.673508101453));+#853=ORIENTED_EDGE('',*,*,#284,.T.);+#854=ORIENTED_EDGE('',*,*,#855,.T.);+#855=EDGE_CURVE('',#281,#856,#858,.T.);+#856=VERTEX_POINT('',#857);+#857=CARTESIAN_POINT('',(-5.08,-4.525,0.9));+#858=LINE('',#859,#658);+#859=CARTESIAN_POINT('',(-5.08,-4.525,0.673508101453));+#860=ORIENTED_EDGE('',*,*,#861,.F.);+#861=EDGE_CURVE('',#849,#856,#626,.T.);+#862=ADVANCED_FACE('',(#863),#881,.F.);+#863=FACE_BOUND('',#864,.F.);+#864=EDGE_LOOP('',(#865,#871,#872,#878));+#865=ORIENTED_EDGE('',*,*,#866,.F.);+#866=EDGE_CURVE('',#281,#867,#869,.T.);+#867=VERTEX_POINT('',#868);+#868=CARTESIAN_POINT('',(-5.18,-4.525,0.8));+#869=LINE('',#870,#672);+#870=CARTESIAN_POINT('',(-4.93,-4.525,0.8));+#871=ORIENTED_EDGE('',*,*,#280,.T.);+#872=ORIENTED_EDGE('',*,*,#873,.T.);+#873=EDGE_CURVE('',#277,#874,#876,.T.);+#874=VERTEX_POINT('',#875);+#875=CARTESIAN_POINT('',(-5.18,-4.275,0.8));+#876=LINE('',#877,#672);+#877=CARTESIAN_POINT('',(-4.93,-4.275,0.8));+#878=ORIENTED_EDGE('',*,*,#879,.F.);+#879=EDGE_CURVE('',#867,#874,#880,.T.);+#880=LINE('',#868,#684);+#881=PLANE('',#882);+#882=AXIS2_PLACEMENT_3D('',#870,#13,#673);+#883=ADVANCED_FACE('',(#884),#661,.F.);+#884=FACE_BOUND('',#885,.F.);+#885=EDGE_LOOP('',(#886,#892,#893,#899));+#886=ORIENTED_EDGE('',*,*,#887,.F.);+#887=EDGE_CURVE('',#277,#888,#890,.T.);+#888=VERTEX_POINT('',#889);+#889=CARTESIAN_POINT('',(-5.08,-4.275,0.9));+#890=LINE('',#891,#658);+#891=CARTESIAN_POINT('',(-5.08,-4.275,0.673508101453));+#892=ORIENTED_EDGE('',*,*,#276,.T.);+#893=ORIENTED_EDGE('',*,*,#894,.T.);+#894=EDGE_CURVE('',#273,#895,#897,.T.);+#895=VERTEX_POINT('',#896);+#896=CARTESIAN_POINT('',(-5.08,-3.725,0.9));+#897=LINE('',#898,#658);+#898=CARTESIAN_POINT('',(-5.08,-3.725,0.673508101453));+#899=ORIENTED_EDGE('',*,*,#900,.F.);+#900=EDGE_CURVE('',#888,#895,#626,.T.);+#901=ADVANCED_FACE('',(#902),#920,.F.);+#902=FACE_BOUND('',#903,.F.);+#903=EDGE_LOOP('',(#904,#910,#911,#917));+#904=ORIENTED_EDGE('',*,*,#905,.F.);+#905=EDGE_CURVE('',#273,#906,#908,.T.);+#906=VERTEX_POINT('',#907);+#907=CARTESIAN_POINT('',(-5.18,-3.725,0.8));+#908=LINE('',#909,#672);+#909=CARTESIAN_POINT('',(-4.93,-3.725,0.8));+#910=ORIENTED_EDGE('',*,*,#272,.T.);+#911=ORIENTED_EDGE('',*,*,#912,.T.);+#912=EDGE_CURVE('',#269,#913,#915,.T.);+#913=VERTEX_POINT('',#914);+#914=CARTESIAN_POINT('',(-5.18,-3.475,0.8));+#915=LINE('',#916,#672);+#916=CARTESIAN_POINT('',(-4.93,-3.475,0.8));+#917=ORIENTED_EDGE('',*,*,#918,.F.);+#918=EDGE_CURVE('',#906,#913,#919,.T.);+#919=LINE('',#907,#684);+#920=PLANE('',#921);+#921=AXIS2_PLACEMENT_3D('',#909,#13,#673);+#922=ADVANCED_FACE('',(#923),#661,.F.);+#923=FACE_BOUND('',#924,.F.);+#924=EDGE_LOOP('',(#925,#931,#932,#938));+#925=ORIENTED_EDGE('',*,*,#926,.F.);+#926=EDGE_CURVE('',#269,#927,#929,.T.);+#927=VERTEX_POINT('',#928);+#928=CARTESIAN_POINT('',(-5.08,-3.475,0.9));+#929=LINE('',#930,#658);+#930=CARTESIAN_POINT('',(-5.08,-3.475,0.673508101453));+#931=ORIENTED_EDGE('',*,*,#268,.T.);+#932=ORIENTED_EDGE('',*,*,#933,.T.);+#933=EDGE_CURVE('',#265,#934,#936,.T.);+#934=VERTEX_POINT('',#935);+#935=CARTESIAN_POINT('',(-5.08,-2.925,0.9));+#936=LINE('',#937,#658);+#937=CARTESIAN_POINT('',(-5.08,-2.925,0.673508101453));+#938=ORIENTED_EDGE('',*,*,#939,.F.);+#939=EDGE_CURVE('',#927,#934,#626,.T.);+#940=ADVANCED_FACE('',(#941),#959,.F.);+#941=FACE_BOUND('',#942,.F.);+#942=EDGE_LOOP('',(#943,#949,#950,#956));+#943=ORIENTED_EDGE('',*,*,#944,.F.);+#944=EDGE_CURVE('',#265,#945,#947,.T.);+#945=VERTEX_POINT('',#946);+#946=CARTESIAN_POINT('',(-5.18,-2.925,0.8));+#947=LINE('',#948,#672);+#948=CARTESIAN_POINT('',(-4.93,-2.925,0.8));+#949=ORIENTED_EDGE('',*,*,#264,.T.);+#950=ORIENTED_EDGE('',*,*,#951,.T.);+#951=EDGE_CURVE('',#261,#952,#954,.T.);+#952=VERTEX_POINT('',#953);+#953=CARTESIAN_POINT('',(-5.18,-2.675,0.8));+#954=LINE('',#955,#672);+#955=CARTESIAN_POINT('',(-4.93,-2.675,0.8));+#956=ORIENTED_EDGE('',*,*,#957,.F.);+#957=EDGE_CURVE('',#945,#952,#958,.T.);+#958=LINE('',#946,#684);+#959=PLANE('',#960);+#960=AXIS2_PLACEMENT_3D('',#948,#13,#673);+#961=ADVANCED_FACE('',(#962),#661,.F.);+#962=FACE_BOUND('',#963,.F.);+#963=EDGE_LOOP('',(#964,#970,#971,#977));+#964=ORIENTED_EDGE('',*,*,#965,.F.);+#965=EDGE_CURVE('',#261,#966,#968,.T.);+#966=VERTEX_POINT('',#967);+#967=CARTESIAN_POINT('',(-5.08,-2.675,0.9));+#968=LINE('',#969,#658);+#969=CARTESIAN_POINT('',(-5.08,-2.675,0.673508101453));+#970=ORIENTED_EDGE('',*,*,#260,.T.);+#971=ORIENTED_EDGE('',*,*,#972,.T.);+#972=EDGE_CURVE('',#257,#973,#975,.T.);+#973=VERTEX_POINT('',#974);+#974=CARTESIAN_POINT('',(-5.08,-2.125,0.9));+#975=LINE('',#976,#658);+#976=CARTESIAN_POINT('',(-5.08,-2.125,0.673508101453));+#977=ORIENTED_EDGE('',*,*,#978,.F.);+#978=EDGE_CURVE('',#966,#973,#626,.T.);+#979=ADVANCED_FACE('',(#980),#998,.F.);+#980=FACE_BOUND('',#981,.F.);+#981=EDGE_LOOP('',(#982,#988,#989,#995));+#982=ORIENTED_EDGE('',*,*,#983,.F.);+#983=EDGE_CURVE('',#257,#984,#986,.T.);+#984=VERTEX_POINT('',#985);+#985=CARTESIAN_POINT('',(-5.18,-2.125,0.8));+#986=LINE('',#987,#672);+#987=CARTESIAN_POINT('',(-4.93,-2.125,0.8));+#988=ORIENTED_EDGE('',*,*,#256,.T.);+#989=ORIENTED_EDGE('',*,*,#990,.T.);+#990=EDGE_CURVE('',#253,#991,#993,.T.);+#991=VERTEX_POINT('',#992);+#992=CARTESIAN_POINT('',(-5.18,-1.875,0.8));+#993=LINE('',#994,#672);+#994=CARTESIAN_POINT('',(-4.93,-1.875,0.8));+#995=ORIENTED_EDGE('',*,*,#996,.F.);+#996=EDGE_CURVE('',#984,#991,#997,.T.);+#997=LINE('',#985,#684);+#998=PLANE('',#999);+#999=AXIS2_PLACEMENT_3D('',#987,#13,#673);+#1000=ADVANCED_FACE('',(#1001),#661,.F.);+#1001=FACE_BOUND('',#1002,.F.);+#1002=EDGE_LOOP('',(#1003,#1009,#1010,#1016));+#1003=ORIENTED_EDGE('',*,*,#1004,.F.);+#1004=EDGE_CURVE('',#253,#1005,#1007,.T.);+#1005=VERTEX_POINT('',#1006);+#1006=CARTESIAN_POINT('',(-5.08,-1.875,0.9));+#1007=LINE('',#1008,#658);+#1008=CARTESIAN_POINT('',(-5.08,-1.875,0.673508101453));+#1009=ORIENTED_EDGE('',*,*,#252,.T.);+#1010=ORIENTED_EDGE('',*,*,#1011,.T.);+#1011=EDGE_CURVE('',#249,#1012,#1014,.T.);+#1012=VERTEX_POINT('',#1013);+#1013=CARTESIAN_POINT('',(-5.08,-1.325,0.9));+#1014=LINE('',#1015,#658);+#1015=CARTESIAN_POINT('',(-5.08,-1.325,0.673508101453));+#1016=ORIENTED_EDGE('',*,*,#1017,.F.);+#1017=EDGE_CURVE('',#1005,#1012,#626,.T.);+#1018=ADVANCED_FACE('',(#1019),#1037,.F.);+#1019=FACE_BOUND('',#1020,.F.);+#1020=EDGE_LOOP('',(#1021,#1027,#1028,#1034));+#1021=ORIENTED_EDGE('',*,*,#1022,.F.);+#1022=EDGE_CURVE('',#249,#1023,#1025,.T.);+#1023=VERTEX_POINT('',#1024);+#1024=CARTESIAN_POINT('',(-5.18,-1.325,0.8));+#1025=LINE('',#1026,#672);+#1026=CARTESIAN_POINT('',(-4.93,-1.325,0.8));+#1027=ORIENTED_EDGE('',*,*,#248,.T.);+#1028=ORIENTED_EDGE('',*,*,#1029,.T.);+#1029=EDGE_CURVE('',#245,#1030,#1032,.T.);+#1030=VERTEX_POINT('',#1031);+#1031=CARTESIAN_POINT('',(-5.18,-1.075,0.8));+#1032=LINE('',#1033,#672);+#1033=CARTESIAN_POINT('',(-4.93,-1.075,0.8));+#1034=ORIENTED_EDGE('',*,*,#1035,.F.);+#1035=EDGE_CURVE('',#1023,#1030,#1036,.T.);+#1036=LINE('',#1024,#684);+#1037=PLANE('',#1038);+#1038=AXIS2_PLACEMENT_3D('',#1026,#13,#673);+#1039=ADVANCED_FACE('',(#1040),#661,.F.);+#1040=FACE_BOUND('',#1041,.F.);+#1041=EDGE_LOOP('',(#1042,#1048,#1049,#1055));+#1042=ORIENTED_EDGE('',*,*,#1043,.F.);+#1043=EDGE_CURVE('',#245,#1044,#1046,.T.);+#1044=VERTEX_POINT('',#1045);+#1045=CARTESIAN_POINT('',(-5.08,-1.075,0.9));+#1046=LINE('',#1047,#658);+#1047=CARTESIAN_POINT('',(-5.08,-1.075,0.673508101453));+#1048=ORIENTED_EDGE('',*,*,#244,.T.);+#1049=ORIENTED_EDGE('',*,*,#1050,.T.);+#1050=EDGE_CURVE('',#241,#1051,#1053,.T.);+#1051=VERTEX_POINT('',#1052);+#1052=CARTESIAN_POINT('',(-5.08,-0.525,0.9));+#1053=LINE('',#1054,#658);+#1054=CARTESIAN_POINT('',(-5.08,-0.525,0.673508101453));+#1055=ORIENTED_EDGE('',*,*,#1056,.F.);+#1056=EDGE_CURVE('',#1044,#1051,#626,.T.);+#1057=ADVANCED_FACE('',(#1058),#1076,.F.);+#1058=FACE_BOUND('',#1059,.F.);+#1059=EDGE_LOOP('',(#1060,#1066,#1067,#1073));+#1060=ORIENTED_EDGE('',*,*,#1061,.F.);+#1061=EDGE_CURVE('',#241,#1062,#1064,.T.);+#1062=VERTEX_POINT('',#1063);+#1063=CARTESIAN_POINT('',(-5.18,-0.525,0.8));+#1064=LINE('',#1065,#672);+#1065=CARTESIAN_POINT('',(-4.93,-0.525,0.8));+#1066=ORIENTED_EDGE('',*,*,#240,.T.);+#1067=ORIENTED_EDGE('',*,*,#1068,.T.);+#1068=EDGE_CURVE('',#237,#1069,#1071,.T.);+#1069=VERTEX_POINT('',#1070);+#1070=CARTESIAN_POINT('',(-5.18,-0.275,0.8));+#1071=LINE('',#1072,#672);+#1072=CARTESIAN_POINT('',(-4.93,-0.275,0.8));+#1073=ORIENTED_EDGE('',*,*,#1074,.F.);+#1074=EDGE_CURVE('',#1062,#1069,#1075,.T.);+#1075=LINE('',#1063,#684);+#1076=PLANE('',#1077);+#1077=AXIS2_PLACEMENT_3D('',#1065,#13,#673);+#1078=ADVANCED_FACE('',(#1079),#661,.F.);+#1079=FACE_BOUND('',#1080,.F.);+#1080=EDGE_LOOP('',(#1081,#1087,#1088,#1094));+#1081=ORIENTED_EDGE('',*,*,#1082,.F.);+#1082=EDGE_CURVE('',#237,#1083,#1085,.T.);+#1083=VERTEX_POINT('',#1084);+#1084=CARTESIAN_POINT('',(-5.08,-0.275,0.9));+#1085=LINE('',#1086,#658);+#1086=CARTESIAN_POINT('',(-5.08,-0.275,0.673508101453));+#1087=ORIENTED_EDGE('',*,*,#236,.T.);+#1088=ORIENTED_EDGE('',*,*,#1089,.T.);+#1089=EDGE_CURVE('',#233,#1090,#1092,.T.);+#1090=VERTEX_POINT('',#1091);+#1091=CARTESIAN_POINT('',(-5.08,0.275,0.9));+#1092=LINE('',#1093,#658);+#1093=CARTESIAN_POINT('',(-5.08,0.275,0.673508101453));+#1094=ORIENTED_EDGE('',*,*,#1095,.F.);+#1095=EDGE_CURVE('',#1083,#1090,#626,.T.);+#1096=ADVANCED_FACE('',(#1097),#1115,.F.);+#1097=FACE_BOUND('',#1098,.F.);+#1098=EDGE_LOOP('',(#1099,#1105,#1106,#1112));+#1099=ORIENTED_EDGE('',*,*,#1100,.F.);+#1100=EDGE_CURVE('',#233,#1101,#1103,.T.);+#1101=VERTEX_POINT('',#1102);+#1102=CARTESIAN_POINT('',(-5.18,0.275,0.8));+#1103=LINE('',#1104,#672);+#1104=CARTESIAN_POINT('',(-4.93,0.275,0.8));+#1105=ORIENTED_EDGE('',*,*,#232,.T.);+#1106=ORIENTED_EDGE('',*,*,#1107,.T.);+#1107=EDGE_CURVE('',#229,#1108,#1110,.T.);+#1108=VERTEX_POINT('',#1109);+#1109=CARTESIAN_POINT('',(-5.18,0.525,0.8));+#1110=LINE('',#1111,#672);+#1111=CARTESIAN_POINT('',(-4.93,0.525,0.8));+#1112=ORIENTED_EDGE('',*,*,#1113,.F.);+#1113=EDGE_CURVE('',#1101,#1108,#1114,.T.);+#1114=LINE('',#1102,#684);+#1115=PLANE('',#1116);+#1116=AXIS2_PLACEMENT_3D('',#1104,#13,#673);+#1117=ADVANCED_FACE('',(#1118),#661,.F.);+#1118=FACE_BOUND('',#1119,.F.);+#1119=EDGE_LOOP('',(#1120,#1126,#1127,#1133));+#1120=ORIENTED_EDGE('',*,*,#1121,.F.);+#1121=EDGE_CURVE('',#229,#1122,#1124,.T.);+#1122=VERTEX_POINT('',#1123);+#1123=CARTESIAN_POINT('',(-5.08,0.525,0.9));+#1124=LINE('',#1125,#658);+#1125=CARTESIAN_POINT('',(-5.08,0.525,0.673508101453));+#1126=ORIENTED_EDGE('',*,*,#228,.T.);+#1127=ORIENTED_EDGE('',*,*,#1128,.T.);+#1128=EDGE_CURVE('',#225,#1129,#1131,.T.);+#1129=VERTEX_POINT('',#1130);+#1130=CARTESIAN_POINT('',(-5.08,1.075,0.9));+#1131=LINE('',#1132,#658);+#1132=CARTESIAN_POINT('',(-5.08,1.075,0.673508101453));+#1133=ORIENTED_EDGE('',*,*,#1134,.F.);+#1134=EDGE_CURVE('',#1122,#1129,#626,.T.);+#1135=ADVANCED_FACE('',(#1136),#1154,.F.);+#1136=FACE_BOUND('',#1137,.F.);+#1137=EDGE_LOOP('',(#1138,#1144,#1145,#1151));+#1138=ORIENTED_EDGE('',*,*,#1139,.F.);+#1139=EDGE_CURVE('',#225,#1140,#1142,.T.);+#1140=VERTEX_POINT('',#1141);+#1141=CARTESIAN_POINT('',(-5.18,1.075,0.8));+#1142=LINE('',#1143,#672);+#1143=CARTESIAN_POINT('',(-4.93,1.075,0.8));+#1144=ORIENTED_EDGE('',*,*,#224,.T.);+#1145=ORIENTED_EDGE('',*,*,#1146,.T.);+#1146=EDGE_CURVE('',#221,#1147,#1149,.T.);+#1147=VERTEX_POINT('',#1148);+#1148=CARTESIAN_POINT('',(-5.18,1.325,0.8));+#1149=LINE('',#1150,#672);+#1150=CARTESIAN_POINT('',(-4.93,1.325,0.8));+#1151=ORIENTED_EDGE('',*,*,#1152,.F.);+#1152=EDGE_CURVE('',#1140,#1147,#1153,.T.);+#1153=LINE('',#1141,#684);+#1154=PLANE('',#1155);+#1155=AXIS2_PLACEMENT_3D('',#1143,#13,#673);+#1156=ADVANCED_FACE('',(#1157),#661,.F.);+#1157=FACE_BOUND('',#1158,.F.);+#1158=EDGE_LOOP('',(#1159,#1165,#1166,#1172));+#1159=ORIENTED_EDGE('',*,*,#1160,.F.);+#1160=EDGE_CURVE('',#221,#1161,#1163,.T.);+#1161=VERTEX_POINT('',#1162);+#1162=CARTESIAN_POINT('',(-5.08,1.325,0.9));+#1163=LINE('',#1164,#658);+#1164=CARTESIAN_POINT('',(-5.08,1.325,0.673508101453));+#1165=ORIENTED_EDGE('',*,*,#220,.T.);+#1166=ORIENTED_EDGE('',*,*,#1167,.T.);+#1167=EDGE_CURVE('',#217,#1168,#1170,.T.);+#1168=VERTEX_POINT('',#1169);+#1169=CARTESIAN_POINT('',(-5.08,1.875,0.9));+#1170=LINE('',#1171,#658);+#1171=CARTESIAN_POINT('',(-5.08,1.875,0.673508101453));+#1172=ORIENTED_EDGE('',*,*,#1173,.F.);+#1173=EDGE_CURVE('',#1161,#1168,#626,.T.);+#1174=ADVANCED_FACE('',(#1175),#1193,.F.);+#1175=FACE_BOUND('',#1176,.F.);+#1176=EDGE_LOOP('',(#1177,#1183,#1184,#1190));+#1177=ORIENTED_EDGE('',*,*,#1178,.F.);+#1178=EDGE_CURVE('',#217,#1179,#1181,.T.);+#1179=VERTEX_POINT('',#1180);+#1180=CARTESIAN_POINT('',(-5.18,1.875,0.8));+#1181=LINE('',#1182,#672);+#1182=CARTESIAN_POINT('',(-4.93,1.875,0.8));+#1183=ORIENTED_EDGE('',*,*,#216,.T.);+#1184=ORIENTED_EDGE('',*,*,#1185,.T.);+#1185=EDGE_CURVE('',#213,#1186,#1188,.T.);+#1186=VERTEX_POINT('',#1187);+#1187=CARTESIAN_POINT('',(-5.18,2.125,0.8));+#1188=LINE('',#1189,#672);+#1189=CARTESIAN_POINT('',(-4.93,2.125,0.8));+#1190=ORIENTED_EDGE('',*,*,#1191,.F.);+#1191=EDGE_CURVE('',#1179,#1186,#1192,.T.);+#1192=LINE('',#1180,#684);+#1193=PLANE('',#1194);+#1194=AXIS2_PLACEMENT_3D('',#1182,#13,#673);+#1195=ADVANCED_FACE('',(#1196),#661,.F.);+#1196=FACE_BOUND('',#1197,.F.);+#1197=EDGE_LOOP('',(#1198,#1204,#1205,#1211));+#1198=ORIENTED_EDGE('',*,*,#1199,.F.);+#1199=EDGE_CURVE('',#213,#1200,#1202,.T.);+#1200=VERTEX_POINT('',#1201);+#1201=CARTESIAN_POINT('',(-5.08,2.125,0.9));+#1202=LINE('',#1203,#658);+#1203=CARTESIAN_POINT('',(-5.08,2.125,0.673508101453));+#1204=ORIENTED_EDGE('',*,*,#212,.T.);+#1205=ORIENTED_EDGE('',*,*,#1206,.T.);+#1206=EDGE_CURVE('',#209,#1207,#1209,.T.);+#1207=VERTEX_POINT('',#1208);+#1208=CARTESIAN_POINT('',(-5.08,2.675,0.9));+#1209=LINE('',#1210,#658);+#1210=CARTESIAN_POINT('',(-5.08,2.675,0.673508101453));+#1211=ORIENTED_EDGE('',*,*,#1212,.F.);+#1212=EDGE_CURVE('',#1200,#1207,#626,.T.);+#1213=ADVANCED_FACE('',(#1214),#1232,.F.);+#1214=FACE_BOUND('',#1215,.F.);+#1215=EDGE_LOOP('',(#1216,#1222,#1223,#1229));+#1216=ORIENTED_EDGE('',*,*,#1217,.F.);+#1217=EDGE_CURVE('',#209,#1218,#1220,.T.);+#1218=VERTEX_POINT('',#1219);+#1219=CARTESIAN_POINT('',(-5.18,2.675,0.8));+#1220=LINE('',#1221,#672);+#1221=CARTESIAN_POINT('',(-4.93,2.675,0.8));+#1222=ORIENTED_EDGE('',*,*,#208,.T.);+#1223=ORIENTED_EDGE('',*,*,#1224,.T.);+#1224=EDGE_CURVE('',#205,#1225,#1227,.T.);+#1225=VERTEX_POINT('',#1226);+#1226=CARTESIAN_POINT('',(-5.18,2.925,0.8));+#1227=LINE('',#1228,#672);+#1228=CARTESIAN_POINT('',(-4.93,2.925,0.8));+#1229=ORIENTED_EDGE('',*,*,#1230,.F.);+#1230=EDGE_CURVE('',#1218,#1225,#1231,.T.);+#1231=LINE('',#1219,#684);+#1232=PLANE('',#1233);+#1233=AXIS2_PLACEMENT_3D('',#1221,#13,#673);+#1234=ADVANCED_FACE('',(#1235),#661,.F.);+#1235=FACE_BOUND('',#1236,.F.);+#1236=EDGE_LOOP('',(#1237,#1243,#1244,#1250));+#1237=ORIENTED_EDGE('',*,*,#1238,.F.);+#1238=EDGE_CURVE('',#205,#1239,#1241,.T.);+#1239=VERTEX_POINT('',#1240);+#1240=CARTESIAN_POINT('',(-5.08,2.925,0.9));+#1241=LINE('',#1242,#658);+#1242=CARTESIAN_POINT('',(-5.08,2.925,0.673508101453));+#1243=ORIENTED_EDGE('',*,*,#204,.T.);+#1244=ORIENTED_EDGE('',*,*,#1245,.T.);+#1245=EDGE_CURVE('',#201,#1246,#1248,.T.);+#1246=VERTEX_POINT('',#1247);+#1247=CARTESIAN_POINT('',(-5.08,3.475,0.9));+#1248=LINE('',#1249,#658);+#1249=CARTESIAN_POINT('',(-5.08,3.475,0.673508101453));+#1250=ORIENTED_EDGE('',*,*,#1251,.F.);+#1251=EDGE_CURVE('',#1239,#1246,#626,.T.);+#1252=ADVANCED_FACE('',(#1253),#1271,.F.);+#1253=FACE_BOUND('',#1254,.F.);+#1254=EDGE_LOOP('',(#1255,#1261,#1262,#1268));+#1255=ORIENTED_EDGE('',*,*,#1256,.F.);+#1256=EDGE_CURVE('',#201,#1257,#1259,.T.);+#1257=VERTEX_POINT('',#1258);+#1258=CARTESIAN_POINT('',(-5.18,3.475,0.8));+#1259=LINE('',#1260,#672);+#1260=CARTESIAN_POINT('',(-4.93,3.475,0.8));+#1261=ORIENTED_EDGE('',*,*,#200,.T.);+#1262=ORIENTED_EDGE('',*,*,#1263,.T.);+#1263=EDGE_CURVE('',#197,#1264,#1266,.T.);+#1264=VERTEX_POINT('',#1265);+#1265=CARTESIAN_POINT('',(-5.18,3.725,0.8));+#1266=LINE('',#1267,#672);+#1267=CARTESIAN_POINT('',(-4.93,3.725,0.8));+#1268=ORIENTED_EDGE('',*,*,#1269,.F.);+#1269=EDGE_CURVE('',#1257,#1264,#1270,.T.);+#1270=LINE('',#1258,#684);+#1271=PLANE('',#1272);+#1272=AXIS2_PLACEMENT_3D('',#1260,#13,#673);+#1273=ADVANCED_FACE('',(#1274),#661,.F.);+#1274=FACE_BOUND('',#1275,.F.);+#1275=EDGE_LOOP('',(#1276,#1282,#1283,#1289));+#1276=ORIENTED_EDGE('',*,*,#1277,.F.);+#1277=EDGE_CURVE('',#197,#1278,#1280,.T.);+#1278=VERTEX_POINT('',#1279);+#1279=CARTESIAN_POINT('',(-5.08,3.725,0.9));+#1280=LINE('',#1281,#658);+#1281=CARTESIAN_POINT('',(-5.08,3.725,0.673508101453));+#1282=ORIENTED_EDGE('',*,*,#196,.T.);+#1283=ORIENTED_EDGE('',*,*,#1284,.T.);+#1284=EDGE_CURVE('',#193,#1285,#1287,.T.);+#1285=VERTEX_POINT('',#1286);+#1286=CARTESIAN_POINT('',(-5.08,4.275,0.9));+#1287=LINE('',#1288,#658);+#1288=CARTESIAN_POINT('',(-5.08,4.275,0.673508101453));+#1289=ORIENTED_EDGE('',*,*,#1290,.F.);+#1290=EDGE_CURVE('',#1278,#1285,#626,.T.);+#1291=ADVANCED_FACE('',(#1292),#1310,.F.);+#1292=FACE_BOUND('',#1293,.F.);+#1293=EDGE_LOOP('',(#1294,#1300,#1301,#1307));+#1294=ORIENTED_EDGE('',*,*,#1295,.F.);+#1295=EDGE_CURVE('',#193,#1296,#1298,.T.);+#1296=VERTEX_POINT('',#1297);+#1297=CARTESIAN_POINT('',(-5.18,4.275,0.8));+#1298=LINE('',#1299,#672);+#1299=CARTESIAN_POINT('',(-4.93,4.275,0.8));+#1300=ORIENTED_EDGE('',*,*,#192,.T.);+#1301=ORIENTED_EDGE('',*,*,#1302,.T.);+#1302=EDGE_CURVE('',#189,#1303,#1305,.T.);+#1303=VERTEX_POINT('',#1304);+#1304=CARTESIAN_POINT('',(-5.18,4.525,0.8));+#1305=LINE('',#1306,#672);+#1306=CARTESIAN_POINT('',(-4.93,4.525,0.8));+#1307=ORIENTED_EDGE('',*,*,#1308,.F.);+#1308=EDGE_CURVE('',#1296,#1303,#1309,.T.);+#1309=LINE('',#1297,#684);+#1310=PLANE('',#1311);+#1311=AXIS2_PLACEMENT_3D('',#1299,#13,#673);+#1312=ADVANCED_FACE('',(#1313),#661,.F.);+#1313=FACE_BOUND('',#1314,.F.);+#1314=EDGE_LOOP('',(#1315,#1321,#1322,#1328));+#1315=ORIENTED_EDGE('',*,*,#1316,.F.);+#1316=EDGE_CURVE('',#189,#1317,#1319,.T.);+#1317=VERTEX_POINT('',#1318);+#1318=CARTESIAN_POINT('',(-5.08,4.525,0.9));+#1319=LINE('',#1320,#658);+#1320=CARTESIAN_POINT('',(-5.08,4.525,0.673508101453));+#1321=ORIENTED_EDGE('',*,*,#188,.T.);+#1322=ORIENTED_EDGE('',*,*,#1323,.T.);+#1323=EDGE_CURVE('',#185,#1324,#1326,.T.);+#1324=VERTEX_POINT('',#1325);+#1325=CARTESIAN_POINT('',(-5.08,5.075,0.9));+#1326=LINE('',#1327,#658);+#1327=CARTESIAN_POINT('',(-5.08,5.075,0.673508101453));+#1328=ORIENTED_EDGE('',*,*,#1329,.F.);+#1329=EDGE_CURVE('',#1317,#1324,#626,.T.);+#1330=ADVANCED_FACE('',(#1331),#1349,.F.);+#1331=FACE_BOUND('',#1332,.F.);+#1332=EDGE_LOOP('',(#1333,#1339,#1340,#1346));+#1333=ORIENTED_EDGE('',*,*,#1334,.F.);+#1334=EDGE_CURVE('',#185,#1335,#1337,.T.);+#1335=VERTEX_POINT('',#1336);+#1336=CARTESIAN_POINT('',(-5.18,5.075,0.8));+#1337=LINE('',#1338,#672);+#1338=CARTESIAN_POINT('',(-4.93,5.075,0.8));+#1339=ORIENTED_EDGE('',*,*,#184,.T.);+#1340=ORIENTED_EDGE('',*,*,#1341,.T.);+#1341=EDGE_CURVE('',#181,#1342,#1344,.T.);+#1342=VERTEX_POINT('',#1343);+#1343=CARTESIAN_POINT('',(-5.18,5.325,0.8));+#1344=LINE('',#1345,#672);+#1345=CARTESIAN_POINT('',(-4.93,5.325,0.8));+#1346=ORIENTED_EDGE('',*,*,#1347,.F.);+#1347=EDGE_CURVE('',#1335,#1342,#1348,.T.);+#1348=LINE('',#1336,#684);+#1349=PLANE('',#1350);+#1350=AXIS2_PLACEMENT_3D('',#1338,#13,#673);+#1351=ADVANCED_FACE('',(#1352),#661,.F.);+#1352=FACE_BOUND('',#1353,.F.);+#1353=EDGE_LOOP('',(#1354,#1360,#1361,#1367));+#1354=ORIENTED_EDGE('',*,*,#1355,.F.);+#1355=EDGE_CURVE('',#181,#1356,#1358,.T.);+#1356=VERTEX_POINT('',#1357);+#1357=CARTESIAN_POINT('',(-5.08,5.325,0.9));+#1358=LINE('',#1359,#658);+#1359=CARTESIAN_POINT('',(-5.08,5.325,0.673508101453));+#1360=ORIENTED_EDGE('',*,*,#180,.T.);+#1361=ORIENTED_EDGE('',*,*,#1362,.T.);+#1362=EDGE_CURVE('',#177,#1363,#1365,.T.);+#1363=VERTEX_POINT('',#1364);+#1364=CARTESIAN_POINT('',(-5.08,5.875,0.9));+#1365=LINE('',#1366,#658);+#1366=CARTESIAN_POINT('',(-5.08,5.875,0.673508101453));+#1367=ORIENTED_EDGE('',*,*,#1368,.F.);+#1368=EDGE_CURVE('',#1356,#1363,#626,.T.);+#1369=ADVANCED_FACE('',(#1370),#1388,.F.);+#1370=FACE_BOUND('',#1371,.F.);+#1371=EDGE_LOOP('',(#1372,#1378,#1379,#1385));+#1372=ORIENTED_EDGE('',*,*,#1373,.F.);+#1373=EDGE_CURVE('',#177,#1374,#1376,.T.);+#1374=VERTEX_POINT('',#1375);+#1375=CARTESIAN_POINT('',(-5.18,5.875,0.8));+#1376=LINE('',#1377,#672);+#1377=CARTESIAN_POINT('',(-4.93,5.875,0.8));+#1378=ORIENTED_EDGE('',*,*,#176,.T.);+#1379=ORIENTED_EDGE('',*,*,#1380,.T.);+#1380=EDGE_CURVE('',#173,#1381,#1383,.T.);+#1381=VERTEX_POINT('',#1382);+#1382=CARTESIAN_POINT('',(-5.18,6.125,0.8));+#1383=LINE('',#1384,#672);+#1384=CARTESIAN_POINT('',(-4.93,6.125,0.8));+#1385=ORIENTED_EDGE('',*,*,#1386,.F.);+#1386=EDGE_CURVE('',#1374,#1381,#1387,.T.);+#1387=LINE('',#1375,#684);+#1388=PLANE('',#1389);+#1389=AXIS2_PLACEMENT_3D('',#1377,#13,#673);+#1390=ADVANCED_FACE('',(#1391),#661,.F.);+#1391=FACE_BOUND('',#1392,.F.);+#1392=EDGE_LOOP('',(#1393,#1399,#1400,#1406));+#1393=ORIENTED_EDGE('',*,*,#1394,.F.);+#1394=EDGE_CURVE('',#173,#1395,#1397,.T.);+#1395=VERTEX_POINT('',#1396);+#1396=CARTESIAN_POINT('',(-5.08,6.125,0.9));+#1397=LINE('',#1398,#658);+#1398=CARTESIAN_POINT('',(-5.08,6.125,0.673508101453));+#1399=ORIENTED_EDGE('',*,*,#172,.T.);+#1400=ORIENTED_EDGE('',*,*,#1401,.T.);+#1401=EDGE_CURVE('',#169,#1402,#1404,.T.);+#1402=VERTEX_POINT('',#1403);+#1403=CARTESIAN_POINT('',(-5.08,6.675,0.9));+#1404=LINE('',#1405,#658);+#1405=CARTESIAN_POINT('',(-5.08,6.675,0.673508101453));+#1406=ORIENTED_EDGE('',*,*,#1407,.F.);+#1407=EDGE_CURVE('',#1395,#1402,#626,.T.);+#1408=ADVANCED_FACE('',(#1409),#1427,.F.);+#1409=FACE_BOUND('',#1410,.F.);+#1410=EDGE_LOOP('',(#1411,#1417,#1418,#1424));+#1411=ORIENTED_EDGE('',*,*,#1412,.F.);+#1412=EDGE_CURVE('',#169,#1413,#1415,.T.);+#1413=VERTEX_POINT('',#1414);+#1414=CARTESIAN_POINT('',(-5.18,6.675,0.8));+#1415=LINE('',#1416,#672);+#1416=CARTESIAN_POINT('',(-4.93,6.675,0.8));+#1417=ORIENTED_EDGE('',*,*,#168,.T.);+#1418=ORIENTED_EDGE('',*,*,#1419,.T.);+#1419=EDGE_CURVE('',#165,#1420,#1422,.T.);+#1420=VERTEX_POINT('',#1421);+#1421=CARTESIAN_POINT('',(-5.18,6.925,0.8));+#1422=LINE('',#1423,#672);+#1423=CARTESIAN_POINT('',(-4.93,6.925,0.8));+#1424=ORIENTED_EDGE('',*,*,#1425,.F.);+#1425=EDGE_CURVE('',#1413,#1420,#1426,.T.);+#1426=LINE('',#1414,#684);+#1427=PLANE('',#1428);+#1428=AXIS2_PLACEMENT_3D('',#1416,#13,#673);+#1429=ADVANCED_FACE('',(#1430),#661,.F.);+#1430=FACE_BOUND('',#1431,.F.);+#1431=EDGE_LOOP('',(#1432,#1438,#1439,#1445));+#1432=ORIENTED_EDGE('',*,*,#1433,.F.);+#1433=EDGE_CURVE('',#165,#1434,#1436,.T.);+#1434=VERTEX_POINT('',#1435);+#1435=CARTESIAN_POINT('',(-5.08,6.925,0.9));+#1436=LINE('',#1437,#658);+#1437=CARTESIAN_POINT('',(-5.08,6.925,0.673508101453));+#1438=ORIENTED_EDGE('',*,*,#164,.T.);+#1439=ORIENTED_EDGE('',*,*,#1440,.T.);+#1440=EDGE_CURVE('',#161,#1441,#1443,.T.);+#1441=VERTEX_POINT('',#1442);+#1442=CARTESIAN_POINT('',(-5.08,7.475,0.9));+#1443=LINE('',#1444,#658);+#1444=CARTESIAN_POINT('',(-5.08,7.475,0.673508101453));+#1445=ORIENTED_EDGE('',*,*,#1446,.F.);+#1446=EDGE_CURVE('',#1434,#1441,#626,.T.);+#1447=ADVANCED_FACE('',(#1448),#1466,.F.);+#1448=FACE_BOUND('',#1449,.F.);+#1449=EDGE_LOOP('',(#1450,#1456,#1457,#1463));+#1450=ORIENTED_EDGE('',*,*,#1451,.F.);+#1451=EDGE_CURVE('',#161,#1452,#1454,.T.);+#1452=VERTEX_POINT('',#1453);+#1453=CARTESIAN_POINT('',(-5.18,7.475,0.8));+#1454=LINE('',#1455,#672);+#1455=CARTESIAN_POINT('',(-4.93,7.475,0.8));+#1456=ORIENTED_EDGE('',*,*,#160,.T.);+#1457=ORIENTED_EDGE('',*,*,#1458,.T.);+#1458=EDGE_CURVE('',#157,#1459,#1461,.T.);+#1459=VERTEX_POINT('',#1460);+#1460=CARTESIAN_POINT('',(-5.18,7.725,0.8));+#1461=LINE('',#1462,#672);+#1462=CARTESIAN_POINT('',(-4.93,7.725,0.8));+#1463=ORIENTED_EDGE('',*,*,#1464,.F.);+#1464=EDGE_CURVE('',#1452,#1459,#1465,.T.);+#1465=LINE('',#1453,#684);+#1466=PLANE('',#1467);+#1467=AXIS2_PLACEMENT_3D('',#1455,#13,#673);+#1468=ADVANCED_FACE('',(#1469),#661,.F.);+#1469=FACE_BOUND('',#1470,.F.);+#1470=EDGE_LOOP('',(#1471,#1477,#1478,#1484));+#1471=ORIENTED_EDGE('',*,*,#1472,.F.);+#1472=EDGE_CURVE('',#157,#1473,#1475,.T.);+#1473=VERTEX_POINT('',#1474);+#1474=CARTESIAN_POINT('',(-5.08,7.725,0.9));+#1475=LINE('',#1476,#658);+#1476=CARTESIAN_POINT('',(-5.08,7.725,0.673508101453));+#1477=ORIENTED_EDGE('',*,*,#156,.T.);+#1478=ORIENTED_EDGE('',*,*,#1479,.T.);+#1479=EDGE_CURVE('',#153,#1480,#1482,.T.);+#1480=VERTEX_POINT('',#1481);+#1481=CARTESIAN_POINT('',(-5.08,8.275,0.9));+#1482=LINE('',#1483,#658);+#1483=CARTESIAN_POINT('',(-5.08,8.275,0.673508101453));+#1484=ORIENTED_EDGE('',*,*,#1485,.F.);+#1485=EDGE_CURVE('',#1473,#1480,#626,.T.);+#1486=ADVANCED_FACE('',(#1487),#1505,.F.);+#1487=FACE_BOUND('',#1488,.F.);+#1488=EDGE_LOOP('',(#1489,#1495,#1496,#1502));+#1489=ORIENTED_EDGE('',*,*,#1490,.F.);+#1490=EDGE_CURVE('',#153,#1491,#1493,.T.);+#1491=VERTEX_POINT('',#1492);+#1492=CARTESIAN_POINT('',(-5.18,8.275,0.8));+#1493=LINE('',#1494,#672);+#1494=CARTESIAN_POINT('',(-4.93,8.275,0.8));+#1495=ORIENTED_EDGE('',*,*,#152,.T.);+#1496=ORIENTED_EDGE('',*,*,#1497,.T.);+#1497=EDGE_CURVE('',#147,#1498,#1500,.T.);+#1498=VERTEX_POINT('',#1499);+#1499=CARTESIAN_POINT('',(-5.18,8.525,0.8));+#1500=LINE('',#1501,#672);+#1501=CARTESIAN_POINT('',(-4.93,8.525,0.8));+#1502=ORIENTED_EDGE('',*,*,#1503,.F.);+#1503=EDGE_CURVE('',#1491,#1498,#1504,.T.);+#1504=LINE('',#1492,#684);+#1505=PLANE('',#1506);+#1506=AXIS2_PLACEMENT_3D('',#1494,#13,#673);+#1507=ADVANCED_FACE('',(#1508),#661,.F.);+#1508=FACE_BOUND('',#1509,.F.);+#1509=EDGE_LOOP('',(#1510,#1514,#1515,#1516));+#1510=ORIENTED_EDGE('',*,*,#1511,.F.);+#1511=EDGE_CURVE('',#147,#618,#1512,.T.);+#1512=LINE('',#1513,#658);+#1513=CARTESIAN_POINT('',(-5.08,8.525,0.673508101453));+#1514=ORIENTED_EDGE('',*,*,#146,.T.);+#1515=ORIENTED_EDGE('',*,*,#640,.T.);+#1516=ORIENTED_EDGE('',*,*,#625,.F.);+#1517=ADVANCED_FACE('',(#1518),#1527,.F.);+#1518=FACE_BOUND('',#1519,.F.);+#1519=EDGE_LOOP('',(#1520,#1521,#1522,#1526));+#1520=ORIENTED_EDGE('',*,*,#559,.F.);+#1521=ORIENTED_EDGE('',*,*,#516,.T.);+#1522=ORIENTED_EDGE('',*,*,#1523,.T.);+#1523=EDGE_CURVE('',#513,#581,#1524,.T.);+#1524=LINE('',#1525,#658);+#1525=CARTESIAN_POINT('',(5.08,8.525,0.673508101453));+#1526=ORIENTED_EDGE('',*,*,#580,.F.);+#1527=PLANE('',#1528);+#1528=AXIS2_PLACEMENT_3D('',#561,#73,#59);+#1529=ADVANCED_FACE('',(#1530),#1548,.F.);+#1530=FACE_BOUND('',#1531,.F.);+#1531=EDGE_LOOP('',(#1532,#1538,#1539,#1545));+#1532=ORIENTED_EDGE('',*,*,#1533,.F.);+#1533=EDGE_CURVE('',#513,#1534,#1536,.T.);+#1534=VERTEX_POINT('',#1535);+#1535=CARTESIAN_POINT('',(5.18,8.525,0.8));+#1536=LINE('',#1537,#27);+#1537=CARTESIAN_POINT('',(4.93,8.525,0.8));+#1538=ORIENTED_EDGE('',*,*,#512,.T.);+#1539=ORIENTED_EDGE('',*,*,#1540,.T.);+#1540=EDGE_CURVE('',#509,#1541,#1543,.T.);+#1541=VERTEX_POINT('',#1542);+#1542=CARTESIAN_POINT('',(5.18,8.275,0.8));+#1543=LINE('',#1544,#27);+#1544=CARTESIAN_POINT('',(4.93,8.275,0.8));+#1545=ORIENTED_EDGE('',*,*,#1546,.F.);+#1546=EDGE_CURVE('',#1534,#1541,#1547,.T.);+#1547=LINE('',#1535,#58);+#1548=PLANE('',#1549);+#1549=AXIS2_PLACEMENT_3D('',#1537,#13,#28);+#1550=ADVANCED_FACE('',(#1551),#1527,.F.);+#1551=FACE_BOUND('',#1552,.F.);+#1552=EDGE_LOOP('',(#1553,#1559,#1560,#1566));+#1553=ORIENTED_EDGE('',*,*,#1554,.F.);+#1554=EDGE_CURVE('',#509,#1555,#1557,.T.);+#1555=VERTEX_POINT('',#1556);+#1556=CARTESIAN_POINT('',(5.08,8.275,0.9));+#1557=LINE('',#1558,#658);+#1558=CARTESIAN_POINT('',(5.08,8.275,0.673508101453));+#1559=ORIENTED_EDGE('',*,*,#508,.T.);+#1560=ORIENTED_EDGE('',*,*,#1561,.T.);+#1561=EDGE_CURVE('',#505,#1562,#1564,.T.);+#1562=VERTEX_POINT('',#1563);+#1563=CARTESIAN_POINT('',(5.08,7.725,0.9));+#1564=LINE('',#1565,#658);+#1565=CARTESIAN_POINT('',(5.08,7.725,0.673508101453));+#1566=ORIENTED_EDGE('',*,*,#1567,.F.);+#1567=EDGE_CURVE('',#1555,#1562,#583,.T.);+#1568=ADVANCED_FACE('',(#1569),#1587,.F.);+#1569=FACE_BOUND('',#1570,.F.);+#1570=EDGE_LOOP('',(#1571,#1577,#1578,#1584));+#1571=ORIENTED_EDGE('',*,*,#1572,.F.);+#1572=EDGE_CURVE('',#505,#1573,#1575,.T.);+#1573=VERTEX_POINT('',#1574);+#1574=CARTESIAN_POINT('',(5.18,7.725,0.8));+#1575=LINE('',#1576,#27);+#1576=CARTESIAN_POINT('',(4.93,7.725,0.8));+#1577=ORIENTED_EDGE('',*,*,#504,.T.);+#1578=ORIENTED_EDGE('',*,*,#1579,.T.);+#1579=EDGE_CURVE('',#501,#1580,#1582,.T.);+#1580=VERTEX_POINT('',#1581);+#1581=CARTESIAN_POINT('',(5.18,7.475,0.8));+#1582=LINE('',#1583,#27);+#1583=CARTESIAN_POINT('',(4.93,7.475,0.8));+#1584=ORIENTED_EDGE('',*,*,#1585,.F.);+#1585=EDGE_CURVE('',#1573,#1580,#1586,.T.);+#1586=LINE('',#1574,#58);+#1587=PLANE('',#1588);+#1588=AXIS2_PLACEMENT_3D('',#1576,#13,#28);+#1589=ADVANCED_FACE('',(#1590),#1527,.F.);+#1590=FACE_BOUND('',#1591,.F.);+#1591=EDGE_LOOP('',(#1592,#1598,#1599,#1605));+#1592=ORIENTED_EDGE('',*,*,#1593,.F.);+#1593=EDGE_CURVE('',#501,#1594,#1596,.T.);+#1594=VERTEX_POINT('',#1595);+#1595=CARTESIAN_POINT('',(5.08,7.475,0.9));+#1596=LINE('',#1597,#658);+#1597=CARTESIAN_POINT('',(5.08,7.475,0.673508101453));+#1598=ORIENTED_EDGE('',*,*,#500,.T.);+#1599=ORIENTED_EDGE('',*,*,#1600,.T.);+#1600=EDGE_CURVE('',#497,#1601,#1603,.T.);+#1601=VERTEX_POINT('',#1602);+#1602=CARTESIAN_POINT('',(5.08,6.925,0.9));+#1603=LINE('',#1604,#658);+#1604=CARTESIAN_POINT('',(5.08,6.925,0.673508101453));+#1605=ORIENTED_EDGE('',*,*,#1606,.F.);+#1606=EDGE_CURVE('',#1594,#1601,#583,.T.);+#1607=ADVANCED_FACE('',(#1608),#1626,.F.);+#1608=FACE_BOUND('',#1609,.F.);+#1609=EDGE_LOOP('',(#1610,#1616,#1617,#1623));+#1610=ORIENTED_EDGE('',*,*,#1611,.F.);+#1611=EDGE_CURVE('',#497,#1612,#1614,.T.);+#1612=VERTEX_POINT('',#1613);+#1613=CARTESIAN_POINT('',(5.18,6.925,0.8));+#1614=LINE('',#1615,#27);+#1615=CARTESIAN_POINT('',(4.93,6.925,0.8));+#1616=ORIENTED_EDGE('',*,*,#496,.T.);+#1617=ORIENTED_EDGE('',*,*,#1618,.T.);+#1618=EDGE_CURVE('',#493,#1619,#1621,.T.);+#1619=VERTEX_POINT('',#1620);+#1620=CARTESIAN_POINT('',(5.18,6.675,0.8));+#1621=LINE('',#1622,#27);+#1622=CARTESIAN_POINT('',(4.93,6.675,0.8));+#1623=ORIENTED_EDGE('',*,*,#1624,.F.);+#1624=EDGE_CURVE('',#1612,#1619,#1625,.T.);+#1625=LINE('',#1613,#58);+#1626=PLANE('',#1627);+#1627=AXIS2_PLACEMENT_3D('',#1615,#13,#28);+#1628=ADVANCED_FACE('',(#1629),#1527,.F.);+#1629=FACE_BOUND('',#1630,.F.);+#1630=EDGE_LOOP('',(#1631,#1637,#1638,#1644));+#1631=ORIENTED_EDGE('',*,*,#1632,.F.);+#1632=EDGE_CURVE('',#493,#1633,#1635,.T.);+#1633=VERTEX_POINT('',#1634);+#1634=CARTESIAN_POINT('',(5.08,6.675,0.9));+#1635=LINE('',#1636,#658);+#1636=CARTESIAN_POINT('',(5.08,6.675,0.673508101453));+#1637=ORIENTED_EDGE('',*,*,#492,.T.);+#1638=ORIENTED_EDGE('',*,*,#1639,.T.);+#1639=EDGE_CURVE('',#489,#1640,#1642,.T.);+#1640=VERTEX_POINT('',#1641);+#1641=CARTESIAN_POINT('',(5.08,6.125,0.9));+#1642=LINE('',#1643,#658);+#1643=CARTESIAN_POINT('',(5.08,6.125,0.673508101453));+#1644=ORIENTED_EDGE('',*,*,#1645,.F.);+#1645=EDGE_CURVE('',#1633,#1640,#583,.T.);+#1646=ADVANCED_FACE('',(#1647),#1665,.F.);+#1647=FACE_BOUND('',#1648,.F.);+#1648=EDGE_LOOP('',(#1649,#1655,#1656,#1662));+#1649=ORIENTED_EDGE('',*,*,#1650,.F.);+#1650=EDGE_CURVE('',#489,#1651,#1653,.T.);+#1651=VERTEX_POINT('',#1652);+#1652=CARTESIAN_POINT('',(5.18,6.125,0.8));+#1653=LINE('',#1654,#27);+#1654=CARTESIAN_POINT('',(4.93,6.125,0.8));+#1655=ORIENTED_EDGE('',*,*,#488,.T.);+#1656=ORIENTED_EDGE('',*,*,#1657,.T.);+#1657=EDGE_CURVE('',#485,#1658,#1660,.T.);+#1658=VERTEX_POINT('',#1659);+#1659=CARTESIAN_POINT('',(5.18,5.875,0.8));+#1660=LINE('',#1661,#27);+#1661=CARTESIAN_POINT('',(4.93,5.875,0.8));+#1662=ORIENTED_EDGE('',*,*,#1663,.F.);+#1663=EDGE_CURVE('',#1651,#1658,#1664,.T.);+#1664=LINE('',#1652,#58);+#1665=PLANE('',#1666);+#1666=AXIS2_PLACEMENT_3D('',#1654,#13,#28);+#1667=ADVANCED_FACE('',(#1668),#1527,.F.);+#1668=FACE_BOUND('',#1669,.F.);+#1669=EDGE_LOOP('',(#1670,#1676,#1677,#1683));+#1670=ORIENTED_EDGE('',*,*,#1671,.F.);+#1671=EDGE_CURVE('',#485,#1672,#1674,.T.);+#1672=VERTEX_POINT('',#1673);+#1673=CARTESIAN_POINT('',(5.08,5.875,0.9));+#1674=LINE('',#1675,#658);+#1675=CARTESIAN_POINT('',(5.08,5.875,0.673508101453));+#1676=ORIENTED_EDGE('',*,*,#484,.T.);+#1677=ORIENTED_EDGE('',*,*,#1678,.T.);+#1678=EDGE_CURVE('',#481,#1679,#1681,.T.);+#1679=VERTEX_POINT('',#1680);+#1680=CARTESIAN_POINT('',(5.08,5.325,0.9));+#1681=LINE('',#1682,#658);+#1682=CARTESIAN_POINT('',(5.08,5.325,0.673508101453));+#1683=ORIENTED_EDGE('',*,*,#1684,.F.);+#1684=EDGE_CURVE('',#1672,#1679,#583,.T.);+#1685=ADVANCED_FACE('',(#1686),#1704,.F.);+#1686=FACE_BOUND('',#1687,.F.);+#1687=EDGE_LOOP('',(#1688,#1694,#1695,#1701));+#1688=ORIENTED_EDGE('',*,*,#1689,.F.);+#1689=EDGE_CURVE('',#481,#1690,#1692,.T.);+#1690=VERTEX_POINT('',#1691);+#1691=CARTESIAN_POINT('',(5.18,5.325,0.8));+#1692=LINE('',#1693,#27);+#1693=CARTESIAN_POINT('',(4.93,5.325,0.8));+#1694=ORIENTED_EDGE('',*,*,#480,.T.);+#1695=ORIENTED_EDGE('',*,*,#1696,.T.);+#1696=EDGE_CURVE('',#477,#1697,#1699,.T.);+#1697=VERTEX_POINT('',#1698);+#1698=CARTESIAN_POINT('',(5.18,5.075,0.8));+#1699=LINE('',#1700,#27);+#1700=CARTESIAN_POINT('',(4.93,5.075,0.8));+#1701=ORIENTED_EDGE('',*,*,#1702,.F.);+#1702=EDGE_CURVE('',#1690,#1697,#1703,.T.);+#1703=LINE('',#1691,#58);+#1704=PLANE('',#1705);+#1705=AXIS2_PLACEMENT_3D('',#1693,#13,#28);+#1706=ADVANCED_FACE('',(#1707),#1527,.F.);+#1707=FACE_BOUND('',#1708,.F.);+#1708=EDGE_LOOP('',(#1709,#1715,#1716,#1722));+#1709=ORIENTED_EDGE('',*,*,#1710,.F.);+#1710=EDGE_CURVE('',#477,#1711,#1713,.T.);+#1711=VERTEX_POINT('',#1712);+#1712=CARTESIAN_POINT('',(5.08,5.075,0.9));+#1713=LINE('',#1714,#658);+#1714=CARTESIAN_POINT('',(5.08,5.075,0.673508101453));+#1715=ORIENTED_EDGE('',*,*,#476,.T.);+#1716=ORIENTED_EDGE('',*,*,#1717,.T.);+#1717=EDGE_CURVE('',#473,#1718,#1720,.T.);+#1718=VERTEX_POINT('',#1719);+#1719=CARTESIAN_POINT('',(5.08,4.525,0.9));+#1720=LINE('',#1721,#658);+#1721=CARTESIAN_POINT('',(5.08,4.525,0.673508101453));+#1722=ORIENTED_EDGE('',*,*,#1723,.F.);+#1723=EDGE_CURVE('',#1711,#1718,#583,.T.);+#1724=ADVANCED_FACE('',(#1725),#1743,.F.);+#1725=FACE_BOUND('',#1726,.F.);+#1726=EDGE_LOOP('',(#1727,#1733,#1734,#1740));+#1727=ORIENTED_EDGE('',*,*,#1728,.F.);+#1728=EDGE_CURVE('',#473,#1729,#1731,.T.);+#1729=VERTEX_POINT('',#1730);+#1730=CARTESIAN_POINT('',(5.18,4.525,0.8));+#1731=LINE('',#1732,#27);+#1732=CARTESIAN_POINT('',(4.93,4.525,0.8));+#1733=ORIENTED_EDGE('',*,*,#472,.T.);+#1734=ORIENTED_EDGE('',*,*,#1735,.T.);+#1735=EDGE_CURVE('',#469,#1736,#1738,.T.);+#1736=VERTEX_POINT('',#1737);+#1737=CARTESIAN_POINT('',(5.18,4.275,0.8));+#1738=LINE('',#1739,#27);+#1739=CARTESIAN_POINT('',(4.93,4.275,0.8));+#1740=ORIENTED_EDGE('',*,*,#1741,.F.);+#1741=EDGE_CURVE('',#1729,#1736,#1742,.T.);+#1742=LINE('',#1730,#58);+#1743=PLANE('',#1744);+#1744=AXIS2_PLACEMENT_3D('',#1732,#13,#28);+#1745=ADVANCED_FACE('',(#1746),#1527,.F.);+#1746=FACE_BOUND('',#1747,.F.);+#1747=EDGE_LOOP('',(#1748,#1754,#1755,#1761));+#1748=ORIENTED_EDGE('',*,*,#1749,.F.);+#1749=EDGE_CURVE('',#469,#1750,#1752,.T.);+#1750=VERTEX_POINT('',#1751);+#1751=CARTESIAN_POINT('',(5.08,4.275,0.9));+#1752=LINE('',#1753,#658);+#1753=CARTESIAN_POINT('',(5.08,4.275,0.673508101453));+#1754=ORIENTED_EDGE('',*,*,#468,.T.);+#1755=ORIENTED_EDGE('',*,*,#1756,.T.);+#1756=EDGE_CURVE('',#465,#1757,#1759,.T.);+#1757=VERTEX_POINT('',#1758);+#1758=CARTESIAN_POINT('',(5.08,3.725,0.9));+#1759=LINE('',#1760,#658);+#1760=CARTESIAN_POINT('',(5.08,3.725,0.673508101453));+#1761=ORIENTED_EDGE('',*,*,#1762,.F.);+#1762=EDGE_CURVE('',#1750,#1757,#583,.T.);+#1763=ADVANCED_FACE('',(#1764),#1782,.F.);+#1764=FACE_BOUND('',#1765,.F.);+#1765=EDGE_LOOP('',(#1766,#1772,#1773,#1779));+#1766=ORIENTED_EDGE('',*,*,#1767,.F.);+#1767=EDGE_CURVE('',#465,#1768,#1770,.T.);+#1768=VERTEX_POINT('',#1769);+#1769=CARTESIAN_POINT('',(5.18,3.725,0.8));+#1770=LINE('',#1771,#27);+#1771=CARTESIAN_POINT('',(4.93,3.725,0.8));+#1772=ORIENTED_EDGE('',*,*,#464,.T.);+#1773=ORIENTED_EDGE('',*,*,#1774,.T.);+#1774=EDGE_CURVE('',#461,#1775,#1777,.T.);+#1775=VERTEX_POINT('',#1776);+#1776=CARTESIAN_POINT('',(5.18,3.475,0.8));+#1777=LINE('',#1778,#27);+#1778=CARTESIAN_POINT('',(4.93,3.475,0.8));+#1779=ORIENTED_EDGE('',*,*,#1780,.F.);+#1780=EDGE_CURVE('',#1768,#1775,#1781,.T.);+#1781=LINE('',#1769,#58);+#1782=PLANE('',#1783);+#1783=AXIS2_PLACEMENT_3D('',#1771,#13,#28);+#1784=ADVANCED_FACE('',(#1785),#1527,.F.);+#1785=FACE_BOUND('',#1786,.F.);+#1786=EDGE_LOOP('',(#1787,#1793,#1794,#1800));+#1787=ORIENTED_EDGE('',*,*,#1788,.F.);+#1788=EDGE_CURVE('',#461,#1789,#1791,.T.);+#1789=VERTEX_POINT('',#1790);+#1790=CARTESIAN_POINT('',(5.08,3.475,0.9));+#1791=LINE('',#1792,#658);+#1792=CARTESIAN_POINT('',(5.08,3.475,0.673508101453));+#1793=ORIENTED_EDGE('',*,*,#460,.T.);+#1794=ORIENTED_EDGE('',*,*,#1795,.T.);+#1795=EDGE_CURVE('',#457,#1796,#1798,.T.);+#1796=VERTEX_POINT('',#1797);+#1797=CARTESIAN_POINT('',(5.08,2.925,0.9));+#1798=LINE('',#1799,#658);+#1799=CARTESIAN_POINT('',(5.08,2.925,0.673508101453));+#1800=ORIENTED_EDGE('',*,*,#1801,.F.);+#1801=EDGE_CURVE('',#1789,#1796,#583,.T.);+#1802=ADVANCED_FACE('',(#1803),#1821,.F.);+#1803=FACE_BOUND('',#1804,.F.);+#1804=EDGE_LOOP('',(#1805,#1811,#1812,#1818));+#1805=ORIENTED_EDGE('',*,*,#1806,.F.);+#1806=EDGE_CURVE('',#457,#1807,#1809,.T.);+#1807=VERTEX_POINT('',#1808);+#1808=CARTESIAN_POINT('',(5.18,2.925,0.8));+#1809=LINE('',#1810,#27);+#1810=CARTESIAN_POINT('',(4.93,2.925,0.8));+#1811=ORIENTED_EDGE('',*,*,#456,.T.);+#1812=ORIENTED_EDGE('',*,*,#1813,.T.);+#1813=EDGE_CURVE('',#453,#1814,#1816,.T.);+#1814=VERTEX_POINT('',#1815);+#1815=CARTESIAN_POINT('',(5.18,2.675,0.8));+#1816=LINE('',#1817,#27);+#1817=CARTESIAN_POINT('',(4.93,2.675,0.8));+#1818=ORIENTED_EDGE('',*,*,#1819,.F.);+#1819=EDGE_CURVE('',#1807,#1814,#1820,.T.);+#1820=LINE('',#1808,#58);+#1821=PLANE('',#1822);+#1822=AXIS2_PLACEMENT_3D('',#1810,#13,#28);+#1823=ADVANCED_FACE('',(#1824),#1527,.F.);+#1824=FACE_BOUND('',#1825,.F.);+#1825=EDGE_LOOP('',(#1826,#1832,#1833,#1839));+#1826=ORIENTED_EDGE('',*,*,#1827,.F.);+#1827=EDGE_CURVE('',#453,#1828,#1830,.T.);+#1828=VERTEX_POINT('',#1829);+#1829=CARTESIAN_POINT('',(5.08,2.675,0.9));+#1830=LINE('',#1831,#658);+#1831=CARTESIAN_POINT('',(5.08,2.675,0.673508101453));+#1832=ORIENTED_EDGE('',*,*,#452,.T.);+#1833=ORIENTED_EDGE('',*,*,#1834,.T.);+#1834=EDGE_CURVE('',#449,#1835,#1837,.T.);+#1835=VERTEX_POINT('',#1836);+#1836=CARTESIAN_POINT('',(5.08,2.125,0.9));+#1837=LINE('',#1838,#658);+#1838=CARTESIAN_POINT('',(5.08,2.125,0.673508101453));+#1839=ORIENTED_EDGE('',*,*,#1840,.F.);+#1840=EDGE_CURVE('',#1828,#1835,#583,.T.);+#1841=ADVANCED_FACE('',(#1842),#1860,.F.);+#1842=FACE_BOUND('',#1843,.F.);+#1843=EDGE_LOOP('',(#1844,#1850,#1851,#1857));+#1844=ORIENTED_EDGE('',*,*,#1845,.F.);+#1845=EDGE_CURVE('',#449,#1846,#1848,.T.);+#1846=VERTEX_POINT('',#1847);+#1847=CARTESIAN_POINT('',(5.18,2.125,0.8));+#1848=LINE('',#1849,#27);+#1849=CARTESIAN_POINT('',(4.93,2.125,0.8));+#1850=ORIENTED_EDGE('',*,*,#448,.T.);+#1851=ORIENTED_EDGE('',*,*,#1852,.T.);+#1852=EDGE_CURVE('',#445,#1853,#1855,.T.);+#1853=VERTEX_POINT('',#1854);+#1854=CARTESIAN_POINT('',(5.18,1.875,0.8));+#1855=LINE('',#1856,#27);+#1856=CARTESIAN_POINT('',(4.93,1.875,0.8));+#1857=ORIENTED_EDGE('',*,*,#1858,.F.);+#1858=EDGE_CURVE('',#1846,#1853,#1859,.T.);+#1859=LINE('',#1847,#58);+#1860=PLANE('',#1861);+#1861=AXIS2_PLACEMENT_3D('',#1849,#13,#28);+#1862=ADVANCED_FACE('',(#1863),#1527,.F.);+#1863=FACE_BOUND('',#1864,.F.);+#1864=EDGE_LOOP('',(#1865,#1871,#1872,#1878));+#1865=ORIENTED_EDGE('',*,*,#1866,.F.);+#1866=EDGE_CURVE('',#445,#1867,#1869,.T.);+#1867=VERTEX_POINT('',#1868);+#1868=CARTESIAN_POINT('',(5.08,1.875,0.9));+#1869=LINE('',#1870,#658);+#1870=CARTESIAN_POINT('',(5.08,1.875,0.673508101453));+#1871=ORIENTED_EDGE('',*,*,#444,.T.);+#1872=ORIENTED_EDGE('',*,*,#1873,.T.);+#1873=EDGE_CURVE('',#441,#1874,#1876,.T.);+#1874=VERTEX_POINT('',#1875);+#1875=CARTESIAN_POINT('',(5.08,1.325,0.9));+#1876=LINE('',#1877,#658);+#1877=CARTESIAN_POINT('',(5.08,1.325,0.673508101453));+#1878=ORIENTED_EDGE('',*,*,#1879,.F.);+#1879=EDGE_CURVE('',#1867,#1874,#583,.T.);+#1880=ADVANCED_FACE('',(#1881),#1899,.F.);+#1881=FACE_BOUND('',#1882,.F.);+#1882=EDGE_LOOP('',(#1883,#1889,#1890,#1896));+#1883=ORIENTED_EDGE('',*,*,#1884,.F.);+#1884=EDGE_CURVE('',#441,#1885,#1887,.T.);+#1885=VERTEX_POINT('',#1886);+#1886=CARTESIAN_POINT('',(5.18,1.325,0.8));+#1887=LINE('',#1888,#27);+#1888=CARTESIAN_POINT('',(4.93,1.325,0.8));+#1889=ORIENTED_EDGE('',*,*,#440,.T.);+#1890=ORIENTED_EDGE('',*,*,#1891,.T.);+#1891=EDGE_CURVE('',#437,#1892,#1894,.T.);+#1892=VERTEX_POINT('',#1893);+#1893=CARTESIAN_POINT('',(5.18,1.075,0.8));+#1894=LINE('',#1895,#27);+#1895=CARTESIAN_POINT('',(4.93,1.075,0.8));+#1896=ORIENTED_EDGE('',*,*,#1897,.F.);+#1897=EDGE_CURVE('',#1885,#1892,#1898,.T.);+#1898=LINE('',#1886,#58);+#1899=PLANE('',#1900);+#1900=AXIS2_PLACEMENT_3D('',#1888,#13,#28);+#1901=ADVANCED_FACE('',(#1902),#1527,.F.);+#1902=FACE_BOUND('',#1903,.F.);+#1903=EDGE_LOOP('',(#1904,#1910,#1911,#1917));+#1904=ORIENTED_EDGE('',*,*,#1905,.F.);+#1905=EDGE_CURVE('',#437,#1906,#1908,.T.);+#1906=VERTEX_POINT('',#1907);+#1907=CARTESIAN_POINT('',(5.08,1.075,0.9));+#1908=LINE('',#1909,#658);+#1909=CARTESIAN_POINT('',(5.08,1.075,0.673508101453));+#1910=ORIENTED_EDGE('',*,*,#436,.T.);+#1911=ORIENTED_EDGE('',*,*,#1912,.T.);+#1912=EDGE_CURVE('',#433,#1913,#1915,.T.);+#1913=VERTEX_POINT('',#1914);+#1914=CARTESIAN_POINT('',(5.08,0.525,0.9));+#1915=LINE('',#1916,#658);+#1916=CARTESIAN_POINT('',(5.08,0.525,0.673508101453));+#1917=ORIENTED_EDGE('',*,*,#1918,.F.);+#1918=EDGE_CURVE('',#1906,#1913,#583,.T.);+#1919=ADVANCED_FACE('',(#1920),#1938,.F.);+#1920=FACE_BOUND('',#1921,.F.);+#1921=EDGE_LOOP('',(#1922,#1928,#1929,#1935));+#1922=ORIENTED_EDGE('',*,*,#1923,.F.);+#1923=EDGE_CURVE('',#433,#1924,#1926,.T.);+#1924=VERTEX_POINT('',#1925);+#1925=CARTESIAN_POINT('',(5.18,0.525,0.8));+#1926=LINE('',#1927,#27);+#1927=CARTESIAN_POINT('',(4.93,0.525,0.8));+#1928=ORIENTED_EDGE('',*,*,#432,.T.);+#1929=ORIENTED_EDGE('',*,*,#1930,.T.);+#1930=EDGE_CURVE('',#429,#1931,#1933,.T.);+#1931=VERTEX_POINT('',#1932);+#1932=CARTESIAN_POINT('',(5.18,0.275,0.8));+#1933=LINE('',#1934,#27);+#1934=CARTESIAN_POINT('',(4.93,0.275,0.8));+#1935=ORIENTED_EDGE('',*,*,#1936,.F.);+#1936=EDGE_CURVE('',#1924,#1931,#1937,.T.);+#1937=LINE('',#1925,#58);+#1938=PLANE('',#1939);+#1939=AXIS2_PLACEMENT_3D('',#1927,#13,#28);+#1940=ADVANCED_FACE('',(#1941),#1527,.F.);+#1941=FACE_BOUND('',#1942,.F.);+#1942=EDGE_LOOP('',(#1943,#1949,#1950,#1956));+#1943=ORIENTED_EDGE('',*,*,#1944,.F.);+#1944=EDGE_CURVE('',#429,#1945,#1947,.T.);+#1945=VERTEX_POINT('',#1946);+#1946=CARTESIAN_POINT('',(5.08,0.275,0.9));+#1947=LINE('',#1948,#658);+#1948=CARTESIAN_POINT('',(5.08,0.275,0.673508101453));+#1949=ORIENTED_EDGE('',*,*,#428,.T.);+#1950=ORIENTED_EDGE('',*,*,#1951,.T.);+#1951=EDGE_CURVE('',#425,#1952,#1954,.T.);+#1952=VERTEX_POINT('',#1953);+#1953=CARTESIAN_POINT('',(5.08,-0.275,0.9));+#1954=LINE('',#1955,#658);+#1955=CARTESIAN_POINT('',(5.08,-0.275,0.673508101453));+#1956=ORIENTED_EDGE('',*,*,#1957,.F.);+#1957=EDGE_CURVE('',#1945,#1952,#583,.T.);+#1958=ADVANCED_FACE('',(#1959),#1977,.F.);+#1959=FACE_BOUND('',#1960,.F.);+#1960=EDGE_LOOP('',(#1961,#1967,#1968,#1974));+#1961=ORIENTED_EDGE('',*,*,#1962,.F.);+#1962=EDGE_CURVE('',#425,#1963,#1965,.T.);+#1963=VERTEX_POINT('',#1964);+#1964=CARTESIAN_POINT('',(5.18,-0.275,0.8));+#1965=LINE('',#1966,#27);+#1966=CARTESIAN_POINT('',(4.93,-0.275,0.8));+#1967=ORIENTED_EDGE('',*,*,#424,.T.);+#1968=ORIENTED_EDGE('',*,*,#1969,.T.);+#1969=EDGE_CURVE('',#421,#1970,#1972,.T.);+#1970=VERTEX_POINT('',#1971);+#1971=CARTESIAN_POINT('',(5.18,-0.525,0.8));+#1972=LINE('',#1973,#27);+#1973=CARTESIAN_POINT('',(4.93,-0.525,0.8));+#1974=ORIENTED_EDGE('',*,*,#1975,.F.);+#1975=EDGE_CURVE('',#1963,#1970,#1976,.T.);+#1976=LINE('',#1964,#58);+#1977=PLANE('',#1978);+#1978=AXIS2_PLACEMENT_3D('',#1966,#13,#28);+#1979=ADVANCED_FACE('',(#1980),#1527,.F.);+#1980=FACE_BOUND('',#1981,.F.);+#1981=EDGE_LOOP('',(#1982,#1988,#1989,#1995));+#1982=ORIENTED_EDGE('',*,*,#1983,.F.);+#1983=EDGE_CURVE('',#421,#1984,#1986,.T.);+#1984=VERTEX_POINT('',#1985);+#1985=CARTESIAN_POINT('',(5.08,-0.525,0.9));+#1986=LINE('',#1987,#658);+#1987=CARTESIAN_POINT('',(5.08,-0.525,0.673508101453));+#1988=ORIENTED_EDGE('',*,*,#420,.T.);+#1989=ORIENTED_EDGE('',*,*,#1990,.T.);+#1990=EDGE_CURVE('',#417,#1991,#1993,.T.);+#1991=VERTEX_POINT('',#1992);+#1992=CARTESIAN_POINT('',(5.08,-1.075,0.9));+#1993=LINE('',#1994,#658);+#1994=CARTESIAN_POINT('',(5.08,-1.075,0.673508101453));+#1995=ORIENTED_EDGE('',*,*,#1996,.F.);+#1996=EDGE_CURVE('',#1984,#1991,#583,.T.);+#1997=ADVANCED_FACE('',(#1998),#2016,.F.);+#1998=FACE_BOUND('',#1999,.F.);+#1999=EDGE_LOOP('',(#2000,#2006,#2007,#2013));+#2000=ORIENTED_EDGE('',*,*,#2001,.F.);+#2001=EDGE_CURVE('',#417,#2002,#2004,.T.);+#2002=VERTEX_POINT('',#2003);+#2003=CARTESIAN_POINT('',(5.18,-1.075,0.8));+#2004=LINE('',#2005,#27);+#2005=CARTESIAN_POINT('',(4.93,-1.075,0.8));+#2006=ORIENTED_EDGE('',*,*,#416,.T.);+#2007=ORIENTED_EDGE('',*,*,#2008,.T.);+#2008=EDGE_CURVE('',#413,#2009,#2011,.T.);+#2009=VERTEX_POINT('',#2010);+#2010=CARTESIAN_POINT('',(5.18,-1.325,0.8));+#2011=LINE('',#2012,#27);+#2012=CARTESIAN_POINT('',(4.93,-1.325,0.8));+#2013=ORIENTED_EDGE('',*,*,#2014,.F.);+#2014=EDGE_CURVE('',#2002,#2009,#2015,.T.);+#2015=LINE('',#2003,#58);+#2016=PLANE('',#2017);+#2017=AXIS2_PLACEMENT_3D('',#2005,#13,#28);+#2018=ADVANCED_FACE('',(#2019),#1527,.F.);+#2019=FACE_BOUND('',#2020,.F.);+#2020=EDGE_LOOP('',(#2021,#2027,#2028,#2034));+#2021=ORIENTED_EDGE('',*,*,#2022,.F.);+#2022=EDGE_CURVE('',#413,#2023,#2025,.T.);+#2023=VERTEX_POINT('',#2024);+#2024=CARTESIAN_POINT('',(5.08,-1.325,0.9));+#2025=LINE('',#2026,#658);+#2026=CARTESIAN_POINT('',(5.08,-1.325,0.673508101453));+#2027=ORIENTED_EDGE('',*,*,#412,.T.);+#2028=ORIENTED_EDGE('',*,*,#2029,.T.);+#2029=EDGE_CURVE('',#409,#2030,#2032,.T.);+#2030=VERTEX_POINT('',#2031);+#2031=CARTESIAN_POINT('',(5.08,-1.875,0.9));+#2032=LINE('',#2033,#658);+#2033=CARTESIAN_POINT('',(5.08,-1.875,0.673508101453));+#2034=ORIENTED_EDGE('',*,*,#2035,.F.);+#2035=EDGE_CURVE('',#2023,#2030,#583,.T.);+#2036=ADVANCED_FACE('',(#2037),#2055,.F.);+#2037=FACE_BOUND('',#2038,.F.);+#2038=EDGE_LOOP('',(#2039,#2045,#2046,#2052));+#2039=ORIENTED_EDGE('',*,*,#2040,.F.);+#2040=EDGE_CURVE('',#409,#2041,#2043,.T.);+#2041=VERTEX_POINT('',#2042);+#2042=CARTESIAN_POINT('',(5.18,-1.875,0.8));+#2043=LINE('',#2044,#27);+#2044=CARTESIAN_POINT('',(4.93,-1.875,0.8));+#2045=ORIENTED_EDGE('',*,*,#408,.T.);+#2046=ORIENTED_EDGE('',*,*,#2047,.T.);+#2047=EDGE_CURVE('',#405,#2048,#2050,.T.);+#2048=VERTEX_POINT('',#2049);+#2049=CARTESIAN_POINT('',(5.18,-2.125,0.8));+#2050=LINE('',#2051,#27);+#2051=CARTESIAN_POINT('',(4.93,-2.125,0.8));+#2052=ORIENTED_EDGE('',*,*,#2053,.F.);+#2053=EDGE_CURVE('',#2041,#2048,#2054,.T.);+#2054=LINE('',#2042,#58);+#2055=PLANE('',#2056);+#2056=AXIS2_PLACEMENT_3D('',#2044,#13,#28);+#2057=ADVANCED_FACE('',(#2058),#1527,.F.);+#2058=FACE_BOUND('',#2059,.F.);+#2059=EDGE_LOOP('',(#2060,#2066,#2067,#2073));+#2060=ORIENTED_EDGE('',*,*,#2061,.F.);+#2061=EDGE_CURVE('',#405,#2062,#2064,.T.);+#2062=VERTEX_POINT('',#2063);+#2063=CARTESIAN_POINT('',(5.08,-2.125,0.9));+#2064=LINE('',#2065,#658);+#2065=CARTESIAN_POINT('',(5.08,-2.125,0.673508101453));+#2066=ORIENTED_EDGE('',*,*,#404,.T.);+#2067=ORIENTED_EDGE('',*,*,#2068,.T.);+#2068=EDGE_CURVE('',#401,#2069,#2071,.T.);+#2069=VERTEX_POINT('',#2070);+#2070=CARTESIAN_POINT('',(5.08,-2.675,0.9));+#2071=LINE('',#2072,#658);+#2072=CARTESIAN_POINT('',(5.08,-2.675,0.673508101453));+#2073=ORIENTED_EDGE('',*,*,#2074,.F.);+#2074=EDGE_CURVE('',#2062,#2069,#583,.T.);+#2075=ADVANCED_FACE('',(#2076),#2094,.F.);+#2076=FACE_BOUND('',#2077,.F.);+#2077=EDGE_LOOP('',(#2078,#2084,#2085,#2091));+#2078=ORIENTED_EDGE('',*,*,#2079,.F.);+#2079=EDGE_CURVE('',#401,#2080,#2082,.T.);+#2080=VERTEX_POINT('',#2081);+#2081=CARTESIAN_POINT('',(5.18,-2.675,0.8));+#2082=LINE('',#2083,#27);+#2083=CARTESIAN_POINT('',(4.93,-2.675,0.8));+#2084=ORIENTED_EDGE('',*,*,#400,.T.);+#2085=ORIENTED_EDGE('',*,*,#2086,.T.);+#2086=EDGE_CURVE('',#397,#2087,#2089,.T.);+#2087=VERTEX_POINT('',#2088);+#2088=CARTESIAN_POINT('',(5.18,-2.925,0.8));+#2089=LINE('',#2090,#27);+#2090=CARTESIAN_POINT('',(4.93,-2.925,0.8));+#2091=ORIENTED_EDGE('',*,*,#2092,.F.);+#2092=EDGE_CURVE('',#2080,#2087,#2093,.T.);+#2093=LINE('',#2081,#58);+#2094=PLANE('',#2095);+#2095=AXIS2_PLACEMENT_3D('',#2083,#13,#28);+#2096=ADVANCED_FACE('',(#2097),#1527,.F.);+#2097=FACE_BOUND('',#2098,.F.);+#2098=EDGE_LOOP('',(#2099,#2105,#2106,#2112));+#2099=ORIENTED_EDGE('',*,*,#2100,.F.);+#2100=EDGE_CURVE('',#397,#2101,#2103,.T.);+#2101=VERTEX_POINT('',#2102);+#2102=CARTESIAN_POINT('',(5.08,-2.925,0.9));+#2103=LINE('',#2104,#658);+#2104=CARTESIAN_POINT('',(5.08,-2.925,0.673508101453));+#2105=ORIENTED_EDGE('',*,*,#396,.T.);+#2106=ORIENTED_EDGE('',*,*,#2107,.T.);+#2107=EDGE_CURVE('',#393,#2108,#2110,.T.);+#2108=VERTEX_POINT('',#2109);+#2109=CARTESIAN_POINT('',(5.08,-3.475,0.9));+#2110=LINE('',#2111,#658);+#2111=CARTESIAN_POINT('',(5.08,-3.475,0.673508101453));+#2112=ORIENTED_EDGE('',*,*,#2113,.F.);+#2113=EDGE_CURVE('',#2101,#2108,#583,.T.);+#2114=ADVANCED_FACE('',(#2115),#2133,.F.);+#2115=FACE_BOUND('',#2116,.F.);+#2116=EDGE_LOOP('',(#2117,#2123,#2124,#2130));+#2117=ORIENTED_EDGE('',*,*,#2118,.F.);+#2118=EDGE_CURVE('',#393,#2119,#2121,.T.);+#2119=VERTEX_POINT('',#2120);+#2120=CARTESIAN_POINT('',(5.18,-3.475,0.8));+#2121=LINE('',#2122,#27);+#2122=CARTESIAN_POINT('',(4.93,-3.475,0.8));+#2123=ORIENTED_EDGE('',*,*,#392,.T.);+#2124=ORIENTED_EDGE('',*,*,#2125,.T.);+#2125=EDGE_CURVE('',#389,#2126,#2128,.T.);+#2126=VERTEX_POINT('',#2127);+#2127=CARTESIAN_POINT('',(5.18,-3.725,0.8));+#2128=LINE('',#2129,#27);+#2129=CARTESIAN_POINT('',(4.93,-3.725,0.8));+#2130=ORIENTED_EDGE('',*,*,#2131,.F.);+#2131=EDGE_CURVE('',#2119,#2126,#2132,.T.);+#2132=LINE('',#2120,#58);+#2133=PLANE('',#2134);+#2134=AXIS2_PLACEMENT_3D('',#2122,#13,#28);+#2135=ADVANCED_FACE('',(#2136),#1527,.F.);+#2136=FACE_BOUND('',#2137,.F.);+#2137=EDGE_LOOP('',(#2138,#2144,#2145,#2151));+#2138=ORIENTED_EDGE('',*,*,#2139,.F.);+#2139=EDGE_CURVE('',#389,#2140,#2142,.T.);+#2140=VERTEX_POINT('',#2141);+#2141=CARTESIAN_POINT('',(5.08,-3.725,0.9));+#2142=LINE('',#2143,#658);+#2143=CARTESIAN_POINT('',(5.08,-3.725,0.673508101453));+#2144=ORIENTED_EDGE('',*,*,#388,.T.);+#2145=ORIENTED_EDGE('',*,*,#2146,.T.);+#2146=EDGE_CURVE('',#385,#2147,#2149,.T.);+#2147=VERTEX_POINT('',#2148);+#2148=CARTESIAN_POINT('',(5.08,-4.275,0.9));+#2149=LINE('',#2150,#658);+#2150=CARTESIAN_POINT('',(5.08,-4.275,0.673508101453));+#2151=ORIENTED_EDGE('',*,*,#2152,.F.);+#2152=EDGE_CURVE('',#2140,#2147,#583,.T.);+#2153=ADVANCED_FACE('',(#2154),#2172,.F.);+#2154=FACE_BOUND('',#2155,.F.);+#2155=EDGE_LOOP('',(#2156,#2162,#2163,#2169));+#2156=ORIENTED_EDGE('',*,*,#2157,.F.);+#2157=EDGE_CURVE('',#385,#2158,#2160,.T.);+#2158=VERTEX_POINT('',#2159);+#2159=CARTESIAN_POINT('',(5.18,-4.275,0.8));+#2160=LINE('',#2161,#27);+#2161=CARTESIAN_POINT('',(4.93,-4.275,0.8));+#2162=ORIENTED_EDGE('',*,*,#384,.T.);+#2163=ORIENTED_EDGE('',*,*,#2164,.T.);+#2164=EDGE_CURVE('',#381,#2165,#2167,.T.);+#2165=VERTEX_POINT('',#2166);+#2166=CARTESIAN_POINT('',(5.18,-4.525,0.8));+#2167=LINE('',#2168,#27);+#2168=CARTESIAN_POINT('',(4.93,-4.525,0.8));+#2169=ORIENTED_EDGE('',*,*,#2170,.F.);+#2170=EDGE_CURVE('',#2158,#2165,#2171,.T.);+#2171=LINE('',#2159,#58);+#2172=PLANE('',#2173);+#2173=AXIS2_PLACEMENT_3D('',#2161,#13,#28);+#2174=ADVANCED_FACE('',(#2175),#1527,.F.);+#2175=FACE_BOUND('',#2176,.F.);+#2176=EDGE_LOOP('',(#2177,#2183,#2184,#2190));+#2177=ORIENTED_EDGE('',*,*,#2178,.F.);+#2178=EDGE_CURVE('',#381,#2179,#2181,.T.);+#2179=VERTEX_POINT('',#2180);+#2180=CARTESIAN_POINT('',(5.08,-4.525,0.9));+#2181=LINE('',#2182,#658);+#2182=CARTESIAN_POINT('',(5.08,-4.525,0.673508101453));+#2183=ORIENTED_EDGE('',*,*,#380,.T.);+#2184=ORIENTED_EDGE('',*,*,#2185,.T.);+#2185=EDGE_CURVE('',#377,#2186,#2188,.T.);+#2186=VERTEX_POINT('',#2187);+#2187=CARTESIAN_POINT('',(5.08,-5.075,0.9));+#2188=LINE('',#2189,#658);+#2189=CARTESIAN_POINT('',(5.08,-5.075,0.673508101453));+#2190=ORIENTED_EDGE('',*,*,#2191,.F.);+#2191=EDGE_CURVE('',#2179,#2186,#583,.T.);+#2192=ADVANCED_FACE('',(#2193),#2211,.F.);+#2193=FACE_BOUND('',#2194,.F.);+#2194=EDGE_LOOP('',(#2195,#2201,#2202,#2208));+#2195=ORIENTED_EDGE('',*,*,#2196,.F.);+#2196=EDGE_CURVE('',#377,#2197,#2199,.T.);+#2197=VERTEX_POINT('',#2198);+#2198=CARTESIAN_POINT('',(5.18,-5.075,0.8));+#2199=LINE('',#2200,#27);+#2200=CARTESIAN_POINT('',(4.93,-5.075,0.8));+#2201=ORIENTED_EDGE('',*,*,#376,.T.);+#2202=ORIENTED_EDGE('',*,*,#2203,.T.);+#2203=EDGE_CURVE('',#373,#2204,#2206,.T.);+#2204=VERTEX_POINT('',#2205);+#2205=CARTESIAN_POINT('',(5.18,-5.325,0.8));+#2206=LINE('',#2207,#27);+#2207=CARTESIAN_POINT('',(4.93,-5.325,0.8));+#2208=ORIENTED_EDGE('',*,*,#2209,.F.);+#2209=EDGE_CURVE('',#2197,#2204,#2210,.T.);+#2210=LINE('',#2198,#58);+#2211=PLANE('',#2212);+#2212=AXIS2_PLACEMENT_3D('',#2200,#13,#28);+#2213=ADVANCED_FACE('',(#2214),#1527,.F.);+#2214=FACE_BOUND('',#2215,.F.);+#2215=EDGE_LOOP('',(#2216,#2222,#2223,#2229));+#2216=ORIENTED_EDGE('',*,*,#2217,.F.);+#2217=EDGE_CURVE('',#373,#2218,#2220,.T.);+#2218=VERTEX_POINT('',#2219);+#2219=CARTESIAN_POINT('',(5.08,-5.325,0.9));+#2220=LINE('',#2221,#658);+#2221=CARTESIAN_POINT('',(5.08,-5.325,0.673508101453));+#2222=ORIENTED_EDGE('',*,*,#372,.T.);+#2223=ORIENTED_EDGE('',*,*,#2224,.T.);+#2224=EDGE_CURVE('',#369,#2225,#2227,.T.);+#2225=VERTEX_POINT('',#2226);+#2226=CARTESIAN_POINT('',(5.08,-5.875,0.9));+#2227=LINE('',#2228,#658);+#2228=CARTESIAN_POINT('',(5.08,-5.875,0.673508101453));+#2229=ORIENTED_EDGE('',*,*,#2230,.F.);+#2230=EDGE_CURVE('',#2218,#2225,#583,.T.);+#2231=ADVANCED_FACE('',(#2232),#2250,.F.);+#2232=FACE_BOUND('',#2233,.F.);+#2233=EDGE_LOOP('',(#2234,#2240,#2241,#2247));+#2234=ORIENTED_EDGE('',*,*,#2235,.F.);+#2235=EDGE_CURVE('',#369,#2236,#2238,.T.);+#2236=VERTEX_POINT('',#2237);+#2237=CARTESIAN_POINT('',(5.18,-5.875,0.8));+#2238=LINE('',#2239,#27);+#2239=CARTESIAN_POINT('',(4.93,-5.875,0.8));+#2240=ORIENTED_EDGE('',*,*,#368,.T.);+#2241=ORIENTED_EDGE('',*,*,#2242,.T.);+#2242=EDGE_CURVE('',#365,#2243,#2245,.T.);+#2243=VERTEX_POINT('',#2244);+#2244=CARTESIAN_POINT('',(5.18,-6.125,0.8));+#2245=LINE('',#2246,#27);+#2246=CARTESIAN_POINT('',(4.93,-6.125,0.8));+#2247=ORIENTED_EDGE('',*,*,#2248,.F.);+#2248=EDGE_CURVE('',#2236,#2243,#2249,.T.);+#2249=LINE('',#2237,#58);+#2250=PLANE('',#2251);+#2251=AXIS2_PLACEMENT_3D('',#2239,#13,#28);+#2252=ADVANCED_FACE('',(#2253),#1527,.F.);+#2253=FACE_BOUND('',#2254,.F.);+#2254=EDGE_LOOP('',(#2255,#2261,#2262,#2268));+#2255=ORIENTED_EDGE('',*,*,#2256,.F.);+#2256=EDGE_CURVE('',#365,#2257,#2259,.T.);+#2257=VERTEX_POINT('',#2258);+#2258=CARTESIAN_POINT('',(5.08,-6.125,0.9));+#2259=LINE('',#2260,#658);+#2260=CARTESIAN_POINT('',(5.08,-6.125,0.673508101453));+#2261=ORIENTED_EDGE('',*,*,#364,.T.);+#2262=ORIENTED_EDGE('',*,*,#2263,.T.);+#2263=EDGE_CURVE('',#361,#2264,#2266,.T.);+#2264=VERTEX_POINT('',#2265);+#2265=CARTESIAN_POINT('',(5.08,-6.675,0.9));+#2266=LINE('',#2267,#658);+#2267=CARTESIAN_POINT('',(5.08,-6.675,0.673508101453));+#2268=ORIENTED_EDGE('',*,*,#2269,.F.);+#2269=EDGE_CURVE('',#2257,#2264,#583,.T.);+#2270=ADVANCED_FACE('',(#2271),#2289,.F.);+#2271=FACE_BOUND('',#2272,.F.);+#2272=EDGE_LOOP('',(#2273,#2279,#2280,#2286));+#2273=ORIENTED_EDGE('',*,*,#2274,.F.);+#2274=EDGE_CURVE('',#361,#2275,#2277,.T.);+#2275=VERTEX_POINT('',#2276);+#2276=CARTESIAN_POINT('',(5.18,-6.675,0.8));+#2277=LINE('',#2278,#27);+#2278=CARTESIAN_POINT('',(4.93,-6.675,0.8));+#2279=ORIENTED_EDGE('',*,*,#360,.T.);+#2280=ORIENTED_EDGE('',*,*,#2281,.T.);+#2281=EDGE_CURVE('',#357,#2282,#2284,.T.);+#2282=VERTEX_POINT('',#2283);+#2283=CARTESIAN_POINT('',(5.18,-6.925,0.8));+#2284=LINE('',#2285,#27);+#2285=CARTESIAN_POINT('',(4.93,-6.925,0.8));+#2286=ORIENTED_EDGE('',*,*,#2287,.F.);+#2287=EDGE_CURVE('',#2275,#2282,#2288,.T.);+#2288=LINE('',#2276,#58);+#2289=PLANE('',#2290);+#2290=AXIS2_PLACEMENT_3D('',#2278,#13,#28);+#2291=ADVANCED_FACE('',(#2292),#1527,.F.);+#2292=FACE_BOUND('',#2293,.F.);+#2293=EDGE_LOOP('',(#2294,#2300,#2301,#2307));+#2294=ORIENTED_EDGE('',*,*,#2295,.F.);+#2295=EDGE_CURVE('',#357,#2296,#2298,.T.);+#2296=VERTEX_POINT('',#2297);+#2297=CARTESIAN_POINT('',(5.08,-6.925,0.9));+#2298=LINE('',#2299,#658);+#2299=CARTESIAN_POINT('',(5.08,-6.925,0.673508101453));+#2300=ORIENTED_EDGE('',*,*,#356,.T.);+#2301=ORIENTED_EDGE('',*,*,#2302,.T.);+#2302=EDGE_CURVE('',#353,#2303,#2305,.T.);+#2303=VERTEX_POINT('',#2304);+#2304=CARTESIAN_POINT('',(5.08,-7.475,0.9));+#2305=LINE('',#2306,#658);+#2306=CARTESIAN_POINT('',(5.08,-7.475,0.673508101453));+#2307=ORIENTED_EDGE('',*,*,#2308,.F.);+#2308=EDGE_CURVE('',#2296,#2303,#583,.T.);+#2309=ADVANCED_FACE('',(#2310),#2328,.F.);+#2310=FACE_BOUND('',#2311,.F.);+#2311=EDGE_LOOP('',(#2312,#2318,#2319,#2325));+#2312=ORIENTED_EDGE('',*,*,#2313,.F.);+#2313=EDGE_CURVE('',#353,#2314,#2316,.T.);+#2314=VERTEX_POINT('',#2315);+#2315=CARTESIAN_POINT('',(5.18,-7.475,0.8));+#2316=LINE('',#2317,#27);+#2317=CARTESIAN_POINT('',(4.93,-7.475,0.8));+#2318=ORIENTED_EDGE('',*,*,#352,.T.);+#2319=ORIENTED_EDGE('',*,*,#2320,.T.);+#2320=EDGE_CURVE('',#349,#2321,#2323,.T.);+#2321=VERTEX_POINT('',#2322);+#2322=CARTESIAN_POINT('',(5.18,-7.725,0.8));+#2323=LINE('',#2324,#27);+#2324=CARTESIAN_POINT('',(4.93,-7.725,0.8));+#2325=ORIENTED_EDGE('',*,*,#2326,.F.);+#2326=EDGE_CURVE('',#2314,#2321,#2327,.T.);+#2327=LINE('',#2315,#58);+#2328=PLANE('',#2329);+#2329=AXIS2_PLACEMENT_3D('',#2317,#13,#28);+#2330=ADVANCED_FACE('',(#2331),#1527,.F.);+#2331=FACE_BOUND('',#2332,.F.);+#2332=EDGE_LOOP('',(#2333,#2339,#2340,#2346));+#2333=ORIENTED_EDGE('',*,*,#2334,.F.);+#2334=EDGE_CURVE('',#349,#2335,#2337,.T.);+#2335=VERTEX_POINT('',#2336);+#2336=CARTESIAN_POINT('',(5.08,-7.725,0.9));+#2337=LINE('',#2338,#658);+#2338=CARTESIAN_POINT('',(5.08,-7.725,0.673508101453));+#2339=ORIENTED_EDGE('',*,*,#348,.T.);+#2340=ORIENTED_EDGE('',*,*,#2341,.T.);+#2341=EDGE_CURVE('',#345,#2342,#2344,.T.);+#2342=VERTEX_POINT('',#2343);+#2343=CARTESIAN_POINT('',(5.08,-8.275,0.9));+#2344=LINE('',#2345,#658);+#2345=CARTESIAN_POINT('',(5.08,-8.275,0.673508101453));+#2346=ORIENTED_EDGE('',*,*,#2347,.F.);+#2347=EDGE_CURVE('',#2335,#2342,#583,.T.);+#2348=ADVANCED_FACE('',(#2349),#2367,.F.);+#2349=FACE_BOUND('',#2350,.F.);+#2350=EDGE_LOOP('',(#2351,#2357,#2358,#2364));+#2351=ORIENTED_EDGE('',*,*,#2352,.F.);+#2352=EDGE_CURVE('',#345,#2353,#2355,.T.);+#2353=VERTEX_POINT('',#2354);+#2354=CARTESIAN_POINT('',(5.18,-8.275,0.8));+#2355=LINE('',#2356,#27);+#2356=CARTESIAN_POINT('',(4.93,-8.275,0.8));+#2357=ORIENTED_EDGE('',*,*,#344,.T.);+#2358=ORIENTED_EDGE('',*,*,#2359,.T.);+#2359=EDGE_CURVE('',#340,#2360,#2362,.T.);+#2360=VERTEX_POINT('',#2361);+#2361=CARTESIAN_POINT('',(5.18,-8.525,0.8));+#2362=LINE('',#2363,#27);+#2363=CARTESIAN_POINT('',(4.93,-8.525,0.8));+#2364=ORIENTED_EDGE('',*,*,#2365,.F.);+#2365=EDGE_CURVE('',#2353,#2360,#2366,.T.);+#2366=LINE('',#2354,#58);+#2367=PLANE('',#2368);+#2368=AXIS2_PLACEMENT_3D('',#2356,#13,#28);+#2369=ADVANCED_FACE('',(#2370),#1527,.F.);+#2370=FACE_BOUND('',#2371,.F.);+#2371=EDGE_LOOP('',(#2372,#2378,#2379,#2384));+#2372=ORIENTED_EDGE('',*,*,#2373,.F.);+#2373=EDGE_CURVE('',#340,#2374,#2376,.T.);+#2374=VERTEX_POINT('',#2375);+#2375=CARTESIAN_POINT('',(5.08,-8.525,0.9));+#2376=LINE('',#2377,#658);+#2377=CARTESIAN_POINT('',(5.08,-8.525,0.673508101453));+#2378=ORIENTED_EDGE('',*,*,#339,.T.);+#2379=ORIENTED_EDGE('',*,*,#2380,.T.);+#2380=EDGE_CURVE('',#335,#2381,#2383,.T.);+#2381=VERTEX_POINT('',#2382);+#2382=CARTESIAN_POINT('',(5.08,-9.03,0.9));+#2383=B_SPLINE_CURVE_WITH_KNOTS('',1,(#336,#2382),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2384=ORIENTED_EDGE('',*,*,#2385,.F.);+#2385=EDGE_CURVE('',#2374,#2381,#583,.T.);+#2386=ADVANCED_FACE('',(#2387),#2399,.F.);+#2387=FACE_BOUND('',#2388,.F.);+#2388=EDGE_LOOP('',(#2389,#2390,#2391,#2396));+#2389=ORIENTED_EDGE('',*,*,#524,.T.);+#2390=ORIENTED_EDGE('',*,*,#648,.T.);+#2391=ORIENTED_EDGE('',*,*,#2392,.F.);+#2392=EDGE_CURVE('',#2393,#649,#2395,.T.);+#2393=VERTEX_POINT('',#2394);+#2394=CARTESIAN_POINT('',(-4.905,-9.205,0.9));+#2395=LINE('',#2394,#79);+#2396=ORIENTED_EDGE('',*,*,#2397,.F.);+#2397=EDGE_CURVE('',#525,#2393,#2398,.T.);+#2398=B_SPLINE_CURVE_WITH_KNOTS('',1,(#526,#2394),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2399=PLANE('',#2400);+#2400=AXIS2_PLACEMENT_3D('',#2394,#92,#80);+#2401=ADVANCED_FACE('',(#2402),#2414,.F.);+#2402=FACE_BOUND('',#2403,.F.);+#2403=EDGE_LOOP('',(#2404,#2405,#2410,#2413));+#2404=ORIENTED_EDGE('',*,*,#541,.T.);+#2405=ORIENTED_EDGE('',*,*,#2406,.T.);+#2406=EDGE_CURVE('',#537,#2407,#2409,.T.);+#2407=VERTEX_POINT('',#2408);+#2408=CARTESIAN_POINT('',(4.905,-9.205,0.9));+#2409=B_SPLINE_CURVE_WITH_KNOTS('',1,(#538,#2408),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2410=ORIENTED_EDGE('',*,*,#2411,.F.);+#2411=EDGE_CURVE('',#2381,#2407,#2412,.T.);+#2412=LINE('',#2382,#65);+#2413=ORIENTED_EDGE('',*,*,#2380,.F.);+#2414=PLANE('',#2415);+#2415=AXIS2_PLACEMENT_3D('',#2382,#80,#66);+#2416=ADVANCED_FACE('',(#2417),#2425,.F.);+#2417=FACE_BOUND('',#2418,.F.);+#2418=EDGE_LOOP('',(#2419,#2420,#2421,#2424));+#2419=ORIENTED_EDGE('',*,*,#550,.T.);+#2420=ORIENTED_EDGE('',*,*,#2397,.T.);+#2421=ORIENTED_EDGE('',*,*,#2422,.F.);+#2422=EDGE_CURVE('',#2407,#2393,#2423,.T.);+#2423=LINE('',#2408,#72);+#2424=ORIENTED_EDGE('',*,*,#2406,.F.);+#2425=PLANE('',#2426);+#2426=AXIS2_PLACEMENT_3D('',#2408,#87,#73);+#2427=ADVANCED_FACE('',(#2428),#2448,.F.);+#2428=FACE_BOUND('',#2429,.F.);+#2429=EDGE_LOOP('',(#2430,#2435,#2439,#2441,#2442,#2446));+#2430=ORIENTED_EDGE('',*,*,#2431,.F.);+#2431=EDGE_CURVE('',#2432,#1480,#2434,.T.);+#2432=VERTEX_POINT('',#2433);+#2433=CARTESIAN_POINT('',(-5.18,8.275,0.9));+#2434=LINE('',#2433,#622);+#2435=ORIENTED_EDGE('',*,*,#2436,.T.);+#2436=EDGE_CURVE('',#2432,#2437,#2438,.T.);+#2437=VERTEX_POINT('',#621);+#2438=LINE('',#2433,#684);+#2439=ORIENTED_EDGE('',*,*,#2440,.T.);+#2440=EDGE_CURVE('',#2437,#618,#620,.T.);+#2441=ORIENTED_EDGE('',*,*,#617,.T.);+#2442=ORIENTED_EDGE('',*,*,#2443,.F.);+#2443=EDGE_CURVE('',#2444,#612,#614,.T.);+#2444=VERTEX_POINT('',#2445);+#2445=CARTESIAN_POINT('',(-5.005,8.275,0.9));+#2446=ORIENTED_EDGE('',*,*,#2447,.F.);+#2447=EDGE_CURVE('',#1480,#2444,#2434,.T.);+#2448=PLANE('',#2449);+#2449=AXIS2_PLACEMENT_3D('',#2433,#2450,#623);+#2450=DIRECTION('',(0.,0.,-1.));+#2451=ADVANCED_FACE('',(#2452),#2640,.F.);+#2452=FACE_BOUND('',#2453,.F.);+#2453=EDGE_LOOP('',(#2454,#2459,#2463,#2467,#2471,#2475,#2479,#2483,#2487,#2491,#2495,#2499,#2503,#2507,#2511,#2515,#2519,#2523,#2527,#2531,#2535,#2539,#2543,#2547,#2551,#2555,#2559,#2563,#2567,#2571,#2575,#2579,#2583,#2587,#2591,#2595,#2599,#2603,#2607,#2611,#2615,#2619,#2623,#2625,#2626,#2627,#2632,#2637));+#2454=ORIENTED_EDGE('',*,*,#2455,.T.);+#2455=EDGE_CURVE('',#2456,#2457,#614,.T.);+#2456=VERTEX_POINT('',#615);+#2457=VERTEX_POINT('',#2458);+#2458=CARTESIAN_POINT('',(-5.005,-8.525,0.9));+#2459=ORIENTED_EDGE('',*,*,#2460,.T.);+#2460=EDGE_CURVE('',#2457,#2461,#614,.T.);+#2461=VERTEX_POINT('',#2462);+#2462=CARTESIAN_POINT('',(-5.005,-8.275,0.9));+#2463=ORIENTED_EDGE('',*,*,#2464,.T.);+#2464=EDGE_CURVE('',#2461,#2465,#614,.T.);+#2465=VERTEX_POINT('',#2466);+#2466=CARTESIAN_POINT('',(-5.005,-7.725,0.9));+#2467=ORIENTED_EDGE('',*,*,#2468,.T.);+#2468=EDGE_CURVE('',#2465,#2469,#614,.T.);+#2469=VERTEX_POINT('',#2470);+#2470=CARTESIAN_POINT('',(-5.005,-7.475,0.9));+#2471=ORIENTED_EDGE('',*,*,#2472,.T.);+#2472=EDGE_CURVE('',#2469,#2473,#614,.T.);+#2473=VERTEX_POINT('',#2474);+#2474=CARTESIAN_POINT('',(-5.005,-6.925,0.9));+#2475=ORIENTED_EDGE('',*,*,#2476,.T.);+#2476=EDGE_CURVE('',#2473,#2477,#614,.T.);+#2477=VERTEX_POINT('',#2478);+#2478=CARTESIAN_POINT('',(-5.005,-6.675,0.9));+#2479=ORIENTED_EDGE('',*,*,#2480,.T.);+#2480=EDGE_CURVE('',#2477,#2481,#614,.T.);+#2481=VERTEX_POINT('',#2482);+#2482=CARTESIAN_POINT('',(-5.005,-6.125,0.9));+#2483=ORIENTED_EDGE('',*,*,#2484,.T.);+#2484=EDGE_CURVE('',#2481,#2485,#614,.T.);+#2485=VERTEX_POINT('',#2486);+#2486=CARTESIAN_POINT('',(-5.005,-5.875,0.9));+#2487=ORIENTED_EDGE('',*,*,#2488,.T.);+#2488=EDGE_CURVE('',#2485,#2489,#614,.T.);+#2489=VERTEX_POINT('',#2490);+#2490=CARTESIAN_POINT('',(-5.005,-5.325,0.9));+#2491=ORIENTED_EDGE('',*,*,#2492,.T.);+#2492=EDGE_CURVE('',#2489,#2493,#614,.T.);+#2493=VERTEX_POINT('',#2494);+#2494=CARTESIAN_POINT('',(-5.005,-5.075,0.9));+#2495=ORIENTED_EDGE('',*,*,#2496,.T.);+#2496=EDGE_CURVE('',#2493,#2497,#614,.T.);+#2497=VERTEX_POINT('',#2498);+#2498=CARTESIAN_POINT('',(-5.005,-4.525,0.9));+#2499=ORIENTED_EDGE('',*,*,#2500,.T.);+#2500=EDGE_CURVE('',#2497,#2501,#614,.T.);+#2501=VERTEX_POINT('',#2502);+#2502=CARTESIAN_POINT('',(-5.005,-4.275,0.9));+#2503=ORIENTED_EDGE('',*,*,#2504,.T.);+#2504=EDGE_CURVE('',#2501,#2505,#614,.T.);+#2505=VERTEX_POINT('',#2506);+#2506=CARTESIAN_POINT('',(-5.005,-3.725,0.9));+#2507=ORIENTED_EDGE('',*,*,#2508,.T.);+#2508=EDGE_CURVE('',#2505,#2509,#614,.T.);+#2509=VERTEX_POINT('',#2510);+#2510=CARTESIAN_POINT('',(-5.005,-3.475,0.9));+#2511=ORIENTED_EDGE('',*,*,#2512,.T.);+#2512=EDGE_CURVE('',#2509,#2513,#614,.T.);+#2513=VERTEX_POINT('',#2514);+#2514=CARTESIAN_POINT('',(-5.005,-2.925,0.9));+#2515=ORIENTED_EDGE('',*,*,#2516,.T.);+#2516=EDGE_CURVE('',#2513,#2517,#614,.T.);+#2517=VERTEX_POINT('',#2518);+#2518=CARTESIAN_POINT('',(-5.005,-2.675,0.9));+#2519=ORIENTED_EDGE('',*,*,#2520,.T.);+#2520=EDGE_CURVE('',#2517,#2521,#614,.T.);+#2521=VERTEX_POINT('',#2522);+#2522=CARTESIAN_POINT('',(-5.005,-2.125,0.9));+#2523=ORIENTED_EDGE('',*,*,#2524,.T.);+#2524=EDGE_CURVE('',#2521,#2525,#614,.T.);+#2525=VERTEX_POINT('',#2526);+#2526=CARTESIAN_POINT('',(-5.005,-1.875,0.9));+#2527=ORIENTED_EDGE('',*,*,#2528,.T.);+#2528=EDGE_CURVE('',#2525,#2529,#614,.T.);+#2529=VERTEX_POINT('',#2530);+#2530=CARTESIAN_POINT('',(-5.005,-1.325,0.9));+#2531=ORIENTED_EDGE('',*,*,#2532,.T.);+#2532=EDGE_CURVE('',#2529,#2533,#614,.T.);+#2533=VERTEX_POINT('',#2534);+#2534=CARTESIAN_POINT('',(-5.005,-1.075,0.9));+#2535=ORIENTED_EDGE('',*,*,#2536,.T.);+#2536=EDGE_CURVE('',#2533,#2537,#614,.T.);+#2537=VERTEX_POINT('',#2538);+#2538=CARTESIAN_POINT('',(-5.005,-0.525,0.9));+#2539=ORIENTED_EDGE('',*,*,#2540,.T.);+#2540=EDGE_CURVE('',#2537,#2541,#614,.T.);+#2541=VERTEX_POINT('',#2542);+#2542=CARTESIAN_POINT('',(-5.005,-0.275,0.9));+#2543=ORIENTED_EDGE('',*,*,#2544,.T.);+#2544=EDGE_CURVE('',#2541,#2545,#614,.T.);+#2545=VERTEX_POINT('',#2546);+#2546=CARTESIAN_POINT('',(-5.005,0.275,0.9));+#2547=ORIENTED_EDGE('',*,*,#2548,.T.);+#2548=EDGE_CURVE('',#2545,#2549,#614,.T.);+#2549=VERTEX_POINT('',#2550);+#2550=CARTESIAN_POINT('',(-5.005,0.525,0.9));+#2551=ORIENTED_EDGE('',*,*,#2552,.T.);+#2552=EDGE_CURVE('',#2549,#2553,#614,.T.);+#2553=VERTEX_POINT('',#2554);+#2554=CARTESIAN_POINT('',(-5.005,1.075,0.9));+#2555=ORIENTED_EDGE('',*,*,#2556,.T.);+#2556=EDGE_CURVE('',#2553,#2557,#614,.T.);+#2557=VERTEX_POINT('',#2558);+#2558=CARTESIAN_POINT('',(-5.005,1.325,0.9));+#2559=ORIENTED_EDGE('',*,*,#2560,.T.);+#2560=EDGE_CURVE('',#2557,#2561,#614,.T.);+#2561=VERTEX_POINT('',#2562);+#2562=CARTESIAN_POINT('',(-5.005,1.875,0.9));+#2563=ORIENTED_EDGE('',*,*,#2564,.T.);+#2564=EDGE_CURVE('',#2561,#2565,#614,.T.);+#2565=VERTEX_POINT('',#2566);+#2566=CARTESIAN_POINT('',(-5.005,2.125,0.9));+#2567=ORIENTED_EDGE('',*,*,#2568,.T.);+#2568=EDGE_CURVE('',#2565,#2569,#614,.T.);+#2569=VERTEX_POINT('',#2570);+#2570=CARTESIAN_POINT('',(-5.005,2.675,0.9));+#2571=ORIENTED_EDGE('',*,*,#2572,.T.);+#2572=EDGE_CURVE('',#2569,#2573,#614,.T.);+#2573=VERTEX_POINT('',#2574);+#2574=CARTESIAN_POINT('',(-5.005,2.925,0.9));+#2575=ORIENTED_EDGE('',*,*,#2576,.T.);+#2576=EDGE_CURVE('',#2573,#2577,#614,.T.);+#2577=VERTEX_POINT('',#2578);+#2578=CARTESIAN_POINT('',(-5.005,3.475,0.9));+#2579=ORIENTED_EDGE('',*,*,#2580,.T.);+#2580=EDGE_CURVE('',#2577,#2581,#614,.T.);+#2581=VERTEX_POINT('',#2582);+#2582=CARTESIAN_POINT('',(-5.005,3.725,0.9));+#2583=ORIENTED_EDGE('',*,*,#2584,.T.);+#2584=EDGE_CURVE('',#2581,#2585,#614,.T.);+#2585=VERTEX_POINT('',#2586);+#2586=CARTESIAN_POINT('',(-5.005,4.275,0.9));+#2587=ORIENTED_EDGE('',*,*,#2588,.T.);+#2588=EDGE_CURVE('',#2585,#2589,#614,.T.);+#2589=VERTEX_POINT('',#2590);+#2590=CARTESIAN_POINT('',(-5.005,4.525,0.9));+#2591=ORIENTED_EDGE('',*,*,#2592,.T.);+#2592=EDGE_CURVE('',#2589,#2593,#614,.T.);+#2593=VERTEX_POINT('',#2594);+#2594=CARTESIAN_POINT('',(-5.005,5.075,0.9));+#2595=ORIENTED_EDGE('',*,*,#2596,.T.);+#2596=EDGE_CURVE('',#2593,#2597,#614,.T.);+#2597=VERTEX_POINT('',#2598);+#2598=CARTESIAN_POINT('',(-5.005,5.325,0.9));+#2599=ORIENTED_EDGE('',*,*,#2600,.T.);+#2600=EDGE_CURVE('',#2597,#2601,#614,.T.);+#2601=VERTEX_POINT('',#2602);+#2602=CARTESIAN_POINT('',(-5.005,5.875,0.9));+#2603=ORIENTED_EDGE('',*,*,#2604,.T.);+#2604=EDGE_CURVE('',#2601,#2605,#614,.T.);+#2605=VERTEX_POINT('',#2606);+#2606=CARTESIAN_POINT('',(-5.005,6.125,0.9));+#2607=ORIENTED_EDGE('',*,*,#2608,.T.);+#2608=EDGE_CURVE('',#2605,#2609,#614,.T.);+#2609=VERTEX_POINT('',#2610);+#2610=CARTESIAN_POINT('',(-5.005,6.675,0.9));+#2611=ORIENTED_EDGE('',*,*,#2612,.T.);+#2612=EDGE_CURVE('',#2609,#2613,#614,.T.);+#2613=VERTEX_POINT('',#2614);+#2614=CARTESIAN_POINT('',(-5.005,6.925,0.9));+#2615=ORIENTED_EDGE('',*,*,#2616,.T.);+#2616=EDGE_CURVE('',#2613,#2617,#614,.T.);+#2617=VERTEX_POINT('',#2618);+#2618=CARTESIAN_POINT('',(-5.005,7.475,0.9));+#2619=ORIENTED_EDGE('',*,*,#2620,.T.);+#2620=EDGE_CURVE('',#2617,#2621,#614,.T.);+#2621=VERTEX_POINT('',#2622);+#2622=CARTESIAN_POINT('',(-5.005,7.725,0.9));+#2623=ORIENTED_EDGE('',*,*,#2624,.T.);+#2624=EDGE_CURVE('',#2621,#2444,#614,.T.);+#2625=ORIENTED_EDGE('',*,*,#2443,.T.);+#2626=ORIENTED_EDGE('',*,*,#611,.T.);+#2627=ORIENTED_EDGE('',*,*,#2628,.T.);+#2628=EDGE_CURVE('',#607,#2629,#2631,.T.);+#2629=VERTEX_POINT('',#2630);+#2630=CARTESIAN_POINT('',(-4.894130891773,8.937065445886,1.6));+#2631=B_SPLINE_CURVE_WITH_KNOTS('',1,(#608,#2630),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2632=ORIENTED_EDGE('',*,*,#2633,.F.);+#2633=EDGE_CURVE('',#2634,#2629,#2636,.T.);+#2634=VERTEX_POINT('',#2635);+#2635=CARTESIAN_POINT('',(-4.894130891773,-8.937065445886,1.6));+#2636=LINE('',#2635,#86);+#2637=ORIENTED_EDGE('',*,*,#2638,.F.);+#2638=EDGE_CURVE('',#2456,#2634,#2639,.T.);+#2639=B_SPLINE_CURVE_WITH_KNOTS('',1,(#615,#2635),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2640=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#615,#2635),(#608,#2630)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,17.985),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2641=ADVANCED_FACE('',(#2642),#2654,.F.);+#2642=FACE_BOUND('',#2643,.F.);+#2643=EDGE_LOOP('',(#2644,#2645,#2650,#2653));+#2644=ORIENTED_EDGE('',*,*,#606,.T.);+#2645=ORIENTED_EDGE('',*,*,#2646,.T.);+#2646=EDGE_CURVE('',#602,#2647,#2649,.T.);+#2647=VERTEX_POINT('',#2648);+#2648=CARTESIAN_POINT('',(-4.812065445886,9.019130891773,1.6));+#2649=B_SPLINE_CURVE_WITH_KNOTS('',1,(#603,#2648),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2650=ORIENTED_EDGE('',*,*,#2651,.F.);+#2651=EDGE_CURVE('',#2629,#2647,#2652,.T.);+#2652=LINE('',#2630,#91);+#2653=ORIENTED_EDGE('',*,*,#2628,.F.);+#2654=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#608,#2630),(#603,#2648)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2655=ADVANCED_FACE('',(#2656),#2668,.F.);+#2656=FACE_BOUND('',#2657,.F.);+#2657=EDGE_LOOP('',(#2658,#2659,#2664,#2667));+#2658=ORIENTED_EDGE('',*,*,#601,.T.);+#2659=ORIENTED_EDGE('',*,*,#2660,.T.);+#2660=EDGE_CURVE('',#597,#2661,#2663,.T.);+#2661=VERTEX_POINT('',#2662);+#2662=CARTESIAN_POINT('',(4.812065445886,9.019130891773,1.6));+#2663=B_SPLINE_CURVE_WITH_KNOTS('',1,(#598,#2662),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2664=ORIENTED_EDGE('',*,*,#2665,.F.);+#2665=EDGE_CURVE('',#2647,#2661,#2666,.T.);+#2666=LINE('',#2648,#27);+#2667=ORIENTED_EDGE('',*,*,#2646,.F.);+#2668=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#603,#2648),(#598,#2662)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.735),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2669=ADVANCED_FACE('',(#2670),#2682,.F.);+#2670=FACE_BOUND('',#2671,.F.);+#2671=EDGE_LOOP('',(#2672,#2673,#2678,#2681));+#2672=ORIENTED_EDGE('',*,*,#596,.T.);+#2673=ORIENTED_EDGE('',*,*,#2674,.T.);+#2674=EDGE_CURVE('',#592,#2675,#2677,.T.);+#2675=VERTEX_POINT('',#2676);+#2676=CARTESIAN_POINT('',(4.894130891773,8.937065445886,1.6));+#2677=B_SPLINE_CURVE_WITH_KNOTS('',1,(#593,#2676),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2678=ORIENTED_EDGE('',*,*,#2679,.F.);+#2679=EDGE_CURVE('',#2661,#2675,#2680,.T.);+#2680=LINE('',#2662,#51);+#2681=ORIENTED_EDGE('',*,*,#2660,.F.);+#2682=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#598,#2662),(#593,#2676)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2683=ADVANCED_FACE('',(#2684),#2872,.F.);+#2684=FACE_BOUND('',#2685,.F.);+#2685=EDGE_LOOP('',(#2686,#2687,#2691,#2695,#2699,#2703,#2707,#2711,#2715,#2719,#2723,#2727,#2731,#2735,#2739,#2743,#2747,#2751,#2755,#2759,#2763,#2767,#2771,#2775,#2779,#2783,#2787,#2791,#2795,#2799,#2803,#2807,#2811,#2815,#2819,#2823,#2827,#2831,#2835,#2839,#2843,#2847,#2851,#2855,#2859,#2863,#2868,#2871));+#2686=ORIENTED_EDGE('',*,*,#591,.T.);+#2687=ORIENTED_EDGE('',*,*,#2688,.T.);+#2688=EDGE_CURVE('',#586,#2689,#594,.T.);+#2689=VERTEX_POINT('',#2690);+#2690=CARTESIAN_POINT('',(5.005,8.275,0.9));+#2691=ORIENTED_EDGE('',*,*,#2692,.T.);+#2692=EDGE_CURVE('',#2689,#2693,#594,.T.);+#2693=VERTEX_POINT('',#2694);+#2694=CARTESIAN_POINT('',(5.005,7.725,0.9));+#2695=ORIENTED_EDGE('',*,*,#2696,.T.);+#2696=EDGE_CURVE('',#2693,#2697,#594,.T.);+#2697=VERTEX_POINT('',#2698);+#2698=CARTESIAN_POINT('',(5.005,7.475,0.9));+#2699=ORIENTED_EDGE('',*,*,#2700,.T.);+#2700=EDGE_CURVE('',#2697,#2701,#594,.T.);+#2701=VERTEX_POINT('',#2702);+#2702=CARTESIAN_POINT('',(5.005,6.925,0.9));+#2703=ORIENTED_EDGE('',*,*,#2704,.T.);+#2704=EDGE_CURVE('',#2701,#2705,#594,.T.);+#2705=VERTEX_POINT('',#2706);+#2706=CARTESIAN_POINT('',(5.005,6.675,0.9));+#2707=ORIENTED_EDGE('',*,*,#2708,.T.);+#2708=EDGE_CURVE('',#2705,#2709,#594,.T.);+#2709=VERTEX_POINT('',#2710);+#2710=CARTESIAN_POINT('',(5.005,6.125,0.9));+#2711=ORIENTED_EDGE('',*,*,#2712,.T.);+#2712=EDGE_CURVE('',#2709,#2713,#594,.T.);+#2713=VERTEX_POINT('',#2714);+#2714=CARTESIAN_POINT('',(5.005,5.875,0.9));+#2715=ORIENTED_EDGE('',*,*,#2716,.T.);+#2716=EDGE_CURVE('',#2713,#2717,#594,.T.);+#2717=VERTEX_POINT('',#2718);+#2718=CARTESIAN_POINT('',(5.005,5.325,0.9));+#2719=ORIENTED_EDGE('',*,*,#2720,.T.);+#2720=EDGE_CURVE('',#2717,#2721,#594,.T.);+#2721=VERTEX_POINT('',#2722);+#2722=CARTESIAN_POINT('',(5.005,5.075,0.9));+#2723=ORIENTED_EDGE('',*,*,#2724,.T.);+#2724=EDGE_CURVE('',#2721,#2725,#594,.T.);+#2725=VERTEX_POINT('',#2726);+#2726=CARTESIAN_POINT('',(5.005,4.525,0.9));+#2727=ORIENTED_EDGE('',*,*,#2728,.T.);+#2728=EDGE_CURVE('',#2725,#2729,#594,.T.);+#2729=VERTEX_POINT('',#2730);+#2730=CARTESIAN_POINT('',(5.005,4.275,0.9));+#2731=ORIENTED_EDGE('',*,*,#2732,.T.);+#2732=EDGE_CURVE('',#2729,#2733,#594,.T.);+#2733=VERTEX_POINT('',#2734);+#2734=CARTESIAN_POINT('',(5.005,3.725,0.9));+#2735=ORIENTED_EDGE('',*,*,#2736,.T.);+#2736=EDGE_CURVE('',#2733,#2737,#594,.T.);+#2737=VERTEX_POINT('',#2738);+#2738=CARTESIAN_POINT('',(5.005,3.475,0.9));+#2739=ORIENTED_EDGE('',*,*,#2740,.T.);+#2740=EDGE_CURVE('',#2737,#2741,#594,.T.);+#2741=VERTEX_POINT('',#2742);+#2742=CARTESIAN_POINT('',(5.005,2.925,0.9));+#2743=ORIENTED_EDGE('',*,*,#2744,.T.);+#2744=EDGE_CURVE('',#2741,#2745,#594,.T.);+#2745=VERTEX_POINT('',#2746);+#2746=CARTESIAN_POINT('',(5.005,2.675,0.9));+#2747=ORIENTED_EDGE('',*,*,#2748,.T.);+#2748=EDGE_CURVE('',#2745,#2749,#594,.T.);+#2749=VERTEX_POINT('',#2750);+#2750=CARTESIAN_POINT('',(5.005,2.125,0.9));+#2751=ORIENTED_EDGE('',*,*,#2752,.T.);+#2752=EDGE_CURVE('',#2749,#2753,#594,.T.);+#2753=VERTEX_POINT('',#2754);+#2754=CARTESIAN_POINT('',(5.005,1.875,0.9));+#2755=ORIENTED_EDGE('',*,*,#2756,.T.);+#2756=EDGE_CURVE('',#2753,#2757,#594,.T.);+#2757=VERTEX_POINT('',#2758);+#2758=CARTESIAN_POINT('',(5.005,1.325,0.9));+#2759=ORIENTED_EDGE('',*,*,#2760,.T.);+#2760=EDGE_CURVE('',#2757,#2761,#594,.T.);+#2761=VERTEX_POINT('',#2762);+#2762=CARTESIAN_POINT('',(5.005,1.075,0.9));+#2763=ORIENTED_EDGE('',*,*,#2764,.T.);+#2764=EDGE_CURVE('',#2761,#2765,#594,.T.);+#2765=VERTEX_POINT('',#2766);+#2766=CARTESIAN_POINT('',(5.005,0.525,0.9));+#2767=ORIENTED_EDGE('',*,*,#2768,.T.);+#2768=EDGE_CURVE('',#2765,#2769,#594,.T.);+#2769=VERTEX_POINT('',#2770);+#2770=CARTESIAN_POINT('',(5.005,0.275,0.9));+#2771=ORIENTED_EDGE('',*,*,#2772,.T.);+#2772=EDGE_CURVE('',#2769,#2773,#594,.T.);+#2773=VERTEX_POINT('',#2774);+#2774=CARTESIAN_POINT('',(5.005,-0.275,0.9));+#2775=ORIENTED_EDGE('',*,*,#2776,.T.);+#2776=EDGE_CURVE('',#2773,#2777,#594,.T.);+#2777=VERTEX_POINT('',#2778);+#2778=CARTESIAN_POINT('',(5.005,-0.525,0.9));+#2779=ORIENTED_EDGE('',*,*,#2780,.T.);+#2780=EDGE_CURVE('',#2777,#2781,#594,.T.);+#2781=VERTEX_POINT('',#2782);+#2782=CARTESIAN_POINT('',(5.005,-1.075,0.9));+#2783=ORIENTED_EDGE('',*,*,#2784,.T.);+#2784=EDGE_CURVE('',#2781,#2785,#594,.T.);+#2785=VERTEX_POINT('',#2786);+#2786=CARTESIAN_POINT('',(5.005,-1.325,0.9));+#2787=ORIENTED_EDGE('',*,*,#2788,.T.);+#2788=EDGE_CURVE('',#2785,#2789,#594,.T.);+#2789=VERTEX_POINT('',#2790);+#2790=CARTESIAN_POINT('',(5.005,-1.875,0.9));+#2791=ORIENTED_EDGE('',*,*,#2792,.T.);+#2792=EDGE_CURVE('',#2789,#2793,#594,.T.);+#2793=VERTEX_POINT('',#2794);+#2794=CARTESIAN_POINT('',(5.005,-2.125,0.9));+#2795=ORIENTED_EDGE('',*,*,#2796,.T.);+#2796=EDGE_CURVE('',#2793,#2797,#594,.T.);+#2797=VERTEX_POINT('',#2798);+#2798=CARTESIAN_POINT('',(5.005,-2.675,0.9));+#2799=ORIENTED_EDGE('',*,*,#2800,.T.);+#2800=EDGE_CURVE('',#2797,#2801,#594,.T.);+#2801=VERTEX_POINT('',#2802);+#2802=CARTESIAN_POINT('',(5.005,-2.925,0.9));+#2803=ORIENTED_EDGE('',*,*,#2804,.T.);+#2804=EDGE_CURVE('',#2801,#2805,#594,.T.);+#2805=VERTEX_POINT('',#2806);+#2806=CARTESIAN_POINT('',(5.005,-3.475,0.9));+#2807=ORIENTED_EDGE('',*,*,#2808,.T.);+#2808=EDGE_CURVE('',#2805,#2809,#594,.T.);+#2809=VERTEX_POINT('',#2810);+#2810=CARTESIAN_POINT('',(5.005,-3.725,0.9));+#2811=ORIENTED_EDGE('',*,*,#2812,.T.);+#2812=EDGE_CURVE('',#2809,#2813,#594,.T.);+#2813=VERTEX_POINT('',#2814);+#2814=CARTESIAN_POINT('',(5.005,-4.275,0.9));+#2815=ORIENTED_EDGE('',*,*,#2816,.T.);+#2816=EDGE_CURVE('',#2813,#2817,#594,.T.);+#2817=VERTEX_POINT('',#2818);+#2818=CARTESIAN_POINT('',(5.005,-4.525,0.9));+#2819=ORIENTED_EDGE('',*,*,#2820,.T.);+#2820=EDGE_CURVE('',#2817,#2821,#594,.T.);+#2821=VERTEX_POINT('',#2822);+#2822=CARTESIAN_POINT('',(5.005,-5.075,0.9));+#2823=ORIENTED_EDGE('',*,*,#2824,.T.);+#2824=EDGE_CURVE('',#2821,#2825,#594,.T.);+#2825=VERTEX_POINT('',#2826);+#2826=CARTESIAN_POINT('',(5.005,-5.325,0.9));+#2827=ORIENTED_EDGE('',*,*,#2828,.T.);+#2828=EDGE_CURVE('',#2825,#2829,#594,.T.);+#2829=VERTEX_POINT('',#2830);+#2830=CARTESIAN_POINT('',(5.005,-5.875,0.9));+#2831=ORIENTED_EDGE('',*,*,#2832,.T.);+#2832=EDGE_CURVE('',#2829,#2833,#594,.T.);+#2833=VERTEX_POINT('',#2834);+#2834=CARTESIAN_POINT('',(5.005,-6.125,0.9));+#2835=ORIENTED_EDGE('',*,*,#2836,.T.);+#2836=EDGE_CURVE('',#2833,#2837,#594,.T.);+#2837=VERTEX_POINT('',#2838);+#2838=CARTESIAN_POINT('',(5.005,-6.675,0.9));+#2839=ORIENTED_EDGE('',*,*,#2840,.T.);+#2840=EDGE_CURVE('',#2837,#2841,#594,.T.);+#2841=VERTEX_POINT('',#2842);+#2842=CARTESIAN_POINT('',(5.005,-6.925,0.9));+#2843=ORIENTED_EDGE('',*,*,#2844,.T.);+#2844=EDGE_CURVE('',#2841,#2845,#594,.T.);+#2845=VERTEX_POINT('',#2846);+#2846=CARTESIAN_POINT('',(5.005,-7.475,0.9));+#2847=ORIENTED_EDGE('',*,*,#2848,.T.);+#2848=EDGE_CURVE('',#2845,#2849,#594,.T.);+#2849=VERTEX_POINT('',#2850);+#2850=CARTESIAN_POINT('',(5.005,-7.725,0.9));+#2851=ORIENTED_EDGE('',*,*,#2852,.T.);+#2852=EDGE_CURVE('',#2849,#2853,#594,.T.);+#2853=VERTEX_POINT('',#2854);+#2854=CARTESIAN_POINT('',(5.005,-8.275,0.9));+#2855=ORIENTED_EDGE('',*,*,#2856,.T.);+#2856=EDGE_CURVE('',#2853,#2857,#594,.T.);+#2857=VERTEX_POINT('',#2858);+#2858=CARTESIAN_POINT('',(5.005,-8.525,0.9));+#2859=ORIENTED_EDGE('',*,*,#2860,.T.);+#2860=EDGE_CURVE('',#2857,#2861,#594,.T.);+#2861=VERTEX_POINT('',#2862);+#2862=CARTESIAN_POINT('',(5.005,-8.9925,0.9));+#2863=ORIENTED_EDGE('',*,*,#2864,.T.);+#2864=EDGE_CURVE('',#2861,#2865,#2867,.T.);+#2865=VERTEX_POINT('',#2866);+#2866=CARTESIAN_POINT('',(4.894130891773,-8.937065445886,1.6));+#2867=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2862,#2866),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2868=ORIENTED_EDGE('',*,*,#2869,.F.);+#2869=EDGE_CURVE('',#2675,#2865,#2870,.T.);+#2870=LINE('',#2676,#58);+#2871=ORIENTED_EDGE('',*,*,#2674,.F.);+#2872=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#593,#2676),(#2862,#2866)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,17.985),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#2873=ADVANCED_FACE('',(#2874),#2891,.F.);+#2874=FACE_BOUND('',#2875,.F.);+#2875=EDGE_LOOP('',(#2876,#2879,#2884,#2887,#2889,#2890));+#2876=ORIENTED_EDGE('',*,*,#2877,.F.);+#2877=EDGE_CURVE('',#2878,#581,#588,.T.);+#2878=VERTEX_POINT('',#589);+#2879=ORIENTED_EDGE('',*,*,#2880,.T.);+#2880=EDGE_CURVE('',#2878,#2881,#2883,.T.);+#2881=VERTEX_POINT('',#2882);+#2882=CARTESIAN_POINT('',(5.18,8.275,0.9));+#2883=LINE('',#589,#58);+#2884=ORIENTED_EDGE('',*,*,#2885,.T.);+#2885=EDGE_CURVE('',#2881,#1555,#2886,.T.);+#2886=LINE('',#2882,#72);+#2887=ORIENTED_EDGE('',*,*,#2888,.T.);+#2888=EDGE_CURVE('',#1555,#2689,#2886,.T.);+#2889=ORIENTED_EDGE('',*,*,#2688,.F.);+#2890=ORIENTED_EDGE('',*,*,#585,.F.);+#2891=PLANE('',#2892);+#2892=AXIS2_PLACEMENT_3D('',#589,#2450,#73);+#2893=ADVANCED_FACE('',(#2894),#628,.F.);+#2894=FACE_BOUND('',#2895,.F.);+#2895=EDGE_LOOP('',(#2896,#2897,#2901,#2902,#2907,#2912,#2915,#2916,#2920,#2921,#2922,#2923));+#2896=ORIENTED_EDGE('',*,*,#660,.T.);+#2897=ORIENTED_EDGE('',*,*,#2898,.T.);+#2898=EDGE_CURVE('',#654,#2457,#2899,.T.);+#2899=LINE('',#2900,#622);+#2900=CARTESIAN_POINT('',(-5.18,-8.525,0.9));+#2901=ORIENTED_EDGE('',*,*,#2455,.F.);+#2902=ORIENTED_EDGE('',*,*,#2903,.F.);+#2903=EDGE_CURVE('',#2904,#2456,#2906,.T.);+#2904=VERTEX_POINT('',#2905);+#2905=CARTESIAN_POINT('',(-4.8675,-9.13,0.9));+#2906=LINE('',#2905,#79);+#2907=ORIENTED_EDGE('',*,*,#2908,.F.);+#2908=EDGE_CURVE('',#2909,#2904,#2911,.T.);+#2909=VERTEX_POINT('',#2910);+#2910=CARTESIAN_POINT('',(4.8675,-9.13,0.9));+#2911=LINE('',#2910,#72);+#2912=ORIENTED_EDGE('',*,*,#2913,.F.);+#2913=EDGE_CURVE('',#2861,#2909,#2914,.T.);+#2914=LINE('',#2862,#65);+#2915=ORIENTED_EDGE('',*,*,#2860,.F.);+#2916=ORIENTED_EDGE('',*,*,#2917,.F.);+#2917=EDGE_CURVE('',#2374,#2857,#2918,.T.);+#2918=LINE('',#2919,#72);+#2919=CARTESIAN_POINT('',(5.18,-8.525,0.9));+#2920=ORIENTED_EDGE('',*,*,#2385,.T.);+#2921=ORIENTED_EDGE('',*,*,#2411,.T.);+#2922=ORIENTED_EDGE('',*,*,#2422,.T.);+#2923=ORIENTED_EDGE('',*,*,#2392,.T.);+#2924=ADVANCED_FACE('',(#2925),#2993,.F.);+#2925=FACE_BOUND('',#2926,.F.);+#2926=EDGE_LOOP('',(#2927,#2928,#2929,#2938,#2945,#2954,#2959,#2964,#2969,#2977,#2984,#2991));+#2927=ORIENTED_EDGE('',*,*,#653,.F.);+#2928=ORIENTED_EDGE('',*,*,#667,.T.);+#2929=ORIENTED_EDGE('',*,*,#2930,.T.);+#2930=EDGE_CURVE('',#668,#2931,#2933,.T.);+#2931=VERTEX_POINT('',#2932);+#2932=CARTESIAN_POINT('',(-5.278480775301,-8.525,0.717364817767));+#2933=CIRCLE('',#2934,1.E-01);+#2934=AXIS2_PLACEMENT_3D('',#2935,#2936,#2937);+#2935=CARTESIAN_POINT('',(-5.18,-8.525,0.7));+#2936=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#2937=DIRECTION('',(8.881784197001E-15,-1.016287272312E-31,1.));+#2938=ORIENTED_EDGE('',*,*,#2939,.T.);+#2939=EDGE_CURVE('',#2931,#2940,#2942,.T.);+#2940=VERTEX_POINT('',#2941);+#2941=CARTESIAN_POINT('',(-5.371201939752,-8.525,0.165270364467));+#2942=LINE('',#2932,#2943);+#2943=VECTOR('',#2944,1.);+#2944=DIRECTION('',(-0.165624877661,1.895142365679E-18,-0.986188825682));+#2945=ORIENTED_EDGE('',*,*,#2946,.T.);+#2946=EDGE_CURVE('',#2940,#2947,#2949,.T.);+#2947=VERTEX_POINT('',#2948);+#2948=CARTESIAN_POINT('',(-5.568163490354,-8.525,-1.387778780781E-16));+#2949=CIRCLE('',#2950,0.2);+#2950=AXIS2_PLACEMENT_3D('',#2951,#2952,#2953);+#2951=CARTESIAN_POINT('',(-5.568163490354,-8.525,0.2));+#2952=DIRECTION('',(1.144237745222E-17,1.,1.54074395551E-33));+#2953=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#2954=ORIENTED_EDGE('',*,*,#2955,.T.);+#2955=EDGE_CURVE('',#2947,#2956,#2958,.T.);+#2956=VERTEX_POINT('',#2957);+#2957=CARTESIAN_POINT('',(-5.83,-8.525,-1.387778780781E-16));+#2958=LINE('',#2948,#672);+#2959=ORIENTED_EDGE('',*,*,#2960,.T.);+#2960=EDGE_CURVE('',#2956,#2961,#2963,.T.);+#2961=VERTEX_POINT('',#2962);+#2962=CARTESIAN_POINT('',(-5.83,-8.525,1.E-01));+#2963=LINE('',#2957,#658);+#2964=ORIENTED_EDGE('',*,*,#2965,.T.);+#2965=EDGE_CURVE('',#2961,#2966,#2968,.T.);+#2966=VERTEX_POINT('',#2967);+#2967=CARTESIAN_POINT('',(-5.568163490354,-8.525,0.1));+#2968=LINE('',#2962,#622);+#2969=ORIENTED_EDGE('',*,*,#2970,.T.);+#2970=EDGE_CURVE('',#2966,#2971,#2973,.T.);+#2971=VERTEX_POINT('',#2972);+#2972=CARTESIAN_POINT('',(-5.469682715053,-8.525,0.182635182233));+#2973=CIRCLE('',#2974,0.1);+#2974=AXIS2_PLACEMENT_3D('',#2951,#2975,#2976);+#2975=DIRECTION('',(-1.144237745222E-17,-1.,-6.568586551523E-47));+#2976=DIRECTION('',(8.881784197001E-15,-1.016287272312E-31,-1.));+#2977=ORIENTED_EDGE('',*,*,#2978,.T.);+#2978=EDGE_CURVE('',#2971,#2979,#2981,.T.);+#2979=VERTEX_POINT('',#2980);+#2980=CARTESIAN_POINT('',(-5.376961550602,-8.525,0.734729635533));+#2981=LINE('',#2972,#2982);+#2982=VECTOR('',#2983,1.);+#2983=DIRECTION('',(0.165624877661,-1.895142365679E-18,0.986188825682));+#2984=ORIENTED_EDGE('',*,*,#2985,.T.);+#2985=EDGE_CURVE('',#2979,#2986,#2987,.T.);+#2986=VERTEX_POINT('',#2900);+#2987=CIRCLE('',#2988,0.2);+#2988=AXIS2_PLACEMENT_3D('',#2935,#2989,#2990);+#2989=DIRECTION('',(1.144237745222E-17,1.,1.155557966632E-33));+#2990=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#2991=ORIENTED_EDGE('',*,*,#2992,.T.);+#2992=EDGE_CURVE('',#2986,#654,#2899,.T.);+#2993=PLANE('',#2994);+#2994=AXIS2_PLACEMENT_3D('',#2995,#685,#13);+#2995=CARTESIAN_POINT('',(-5.377811491544,-8.525,0.447016202907));+#2996=ADVANCED_FACE('',(#2997),#3011,.F.);+#2997=FACE_BOUND('',#2998,.F.);+#2998=EDGE_LOOP('',(#2999,#3000,#3007,#3010));+#2999=ORIENTED_EDGE('',*,*,#682,.T.);+#3000=ORIENTED_EDGE('',*,*,#3001,.T.);+#3001=EDGE_CURVE('',#677,#3002,#3004,.T.);+#3002=VERTEX_POINT('',#3003);+#3003=CARTESIAN_POINT('',(-5.278480775301,-8.275,0.717364817767));+#3004=CIRCLE('',#3005,1.E-01);+#3005=AXIS2_PLACEMENT_3D('',#3006,#2936,#2937);+#3006=CARTESIAN_POINT('',(-5.18,-8.275,0.7));+#3007=ORIENTED_EDGE('',*,*,#3008,.F.);+#3008=EDGE_CURVE('',#2931,#3002,#3009,.T.);+#3009=LINE('',#2932,#684);+#3010=ORIENTED_EDGE('',*,*,#2930,.F.);+#3011=CYLINDRICAL_SURFACE('',#2934,1.E-01);+#3012=ADVANCED_FACE('',(#3013),#3062,.T.);+#3013=FACE_BOUND('',#3014,.T.);+#3014=EDGE_LOOP('',(#691,#675,#3000,#3015,#3020,#3027,#3032,#3037,#3042,#3048,#3053,#3059));+#3015=ORIENTED_EDGE('',*,*,#3016,.T.);+#3016=EDGE_CURVE('',#3002,#3017,#3019,.T.);+#3017=VERTEX_POINT('',#3018);+#3018=CARTESIAN_POINT('',(-5.371201939752,-8.275,0.165270364467));+#3019=LINE('',#3003,#2943);+#3020=ORIENTED_EDGE('',*,*,#3021,.T.);+#3021=EDGE_CURVE('',#3017,#3022,#3024,.T.);+#3022=VERTEX_POINT('',#3023);+#3023=CARTESIAN_POINT('',(-5.568163490354,-8.275,-1.387778780781E-16));+#3024=CIRCLE('',#3025,0.2);+#3025=AXIS2_PLACEMENT_3D('',#3026,#2952,#2953);+#3026=CARTESIAN_POINT('',(-5.568163490354,-8.275,0.2));+#3027=ORIENTED_EDGE('',*,*,#3028,.T.);+#3028=EDGE_CURVE('',#3022,#3029,#3031,.T.);+#3029=VERTEX_POINT('',#3030);+#3030=CARTESIAN_POINT('',(-5.83,-8.275,-1.387778780781E-16));+#3031=LINE('',#3023,#672);+#3032=ORIENTED_EDGE('',*,*,#3033,.T.);+#3033=EDGE_CURVE('',#3029,#3034,#3036,.T.);+#3034=VERTEX_POINT('',#3035);+#3035=CARTESIAN_POINT('',(-5.83,-8.275,1.E-01));+#3036=LINE('',#3030,#658);+#3037=ORIENTED_EDGE('',*,*,#3038,.T.);+#3038=EDGE_CURVE('',#3034,#3039,#3041,.T.);+#3039=VERTEX_POINT('',#3040);+#3040=CARTESIAN_POINT('',(-5.568163490354,-8.275,0.1));+#3041=LINE('',#3035,#622);+#3042=ORIENTED_EDGE('',*,*,#3043,.T.);+#3043=EDGE_CURVE('',#3039,#3044,#3046,.T.);+#3044=VERTEX_POINT('',#3045);+#3045=CARTESIAN_POINT('',(-5.469682715053,-8.275,0.182635182233));+#3046=CIRCLE('',#3047,0.1);+#3047=AXIS2_PLACEMENT_3D('',#3026,#2975,#2976);+#3048=ORIENTED_EDGE('',*,*,#3049,.T.);+#3049=EDGE_CURVE('',#3044,#3050,#3052,.T.);+#3050=VERTEX_POINT('',#3051);+#3051=CARTESIAN_POINT('',(-5.376961550602,-8.275,0.734729635533));+#3052=LINE('',#3045,#2982);+#3053=ORIENTED_EDGE('',*,*,#3054,.T.);+#3054=EDGE_CURVE('',#3050,#3055,#3057,.T.);+#3055=VERTEX_POINT('',#3056);+#3056=CARTESIAN_POINT('',(-5.18,-8.275,0.9));+#3057=CIRCLE('',#3058,0.2);+#3058=AXIS2_PLACEMENT_3D('',#3006,#2989,#2990);+#3059=ORIENTED_EDGE('',*,*,#3060,.T.);+#3060=EDGE_CURVE('',#3055,#693,#3061,.T.);+#3061=LINE('',#3056,#622);+#3062=PLANE('',#3063);+#3063=AXIS2_PLACEMENT_3D('',#3064,#685,#13);+#3064=CARTESIAN_POINT('',(-5.377811491544,-8.275,0.447016202907));+#3065=ADVANCED_FACE('',(#3066),#628,.F.);+#3066=FACE_BOUND('',#3067,.F.);+#3067=EDGE_LOOP('',(#3068,#3069,#3073,#3074));+#3068=ORIENTED_EDGE('',*,*,#705,.T.);+#3069=ORIENTED_EDGE('',*,*,#3070,.T.);+#3070=EDGE_CURVE('',#700,#2465,#3071,.T.);+#3071=LINE('',#3072,#622);+#3072=CARTESIAN_POINT('',(-5.18,-7.725,0.9));+#3073=ORIENTED_EDGE('',*,*,#2464,.F.);+#3074=ORIENTED_EDGE('',*,*,#3075,.F.);+#3075=EDGE_CURVE('',#693,#2461,#3061,.T.);+#3076=ADVANCED_FACE('',(#3077),#3133,.F.);+#3077=FACE_BOUND('',#3078,.F.);+#3078=EDGE_LOOP('',(#3079,#3080,#3081,#3088,#3093,#3100,#3105,#3110,#3115,#3121,#3126,#3131));+#3079=ORIENTED_EDGE('',*,*,#699,.F.);+#3080=ORIENTED_EDGE('',*,*,#710,.T.);+#3081=ORIENTED_EDGE('',*,*,#3082,.T.);+#3082=EDGE_CURVE('',#711,#3083,#3085,.T.);+#3083=VERTEX_POINT('',#3084);+#3084=CARTESIAN_POINT('',(-5.278480775301,-7.725,0.717364817767));+#3085=CIRCLE('',#3086,1.E-01);+#3086=AXIS2_PLACEMENT_3D('',#3087,#2936,#2937);+#3087=CARTESIAN_POINT('',(-5.18,-7.725,0.7));+#3088=ORIENTED_EDGE('',*,*,#3089,.T.);+#3089=EDGE_CURVE('',#3083,#3090,#3092,.T.);+#3090=VERTEX_POINT('',#3091);+#3091=CARTESIAN_POINT('',(-5.371201939752,-7.725,0.165270364467));+#3092=LINE('',#3084,#2943);+#3093=ORIENTED_EDGE('',*,*,#3094,.T.);+#3094=EDGE_CURVE('',#3090,#3095,#3097,.T.);+#3095=VERTEX_POINT('',#3096);+#3096=CARTESIAN_POINT('',(-5.568163490354,-7.725,-1.387778780781E-16));+#3097=CIRCLE('',#3098,0.2);+#3098=AXIS2_PLACEMENT_3D('',#3099,#2952,#2953);+#3099=CARTESIAN_POINT('',(-5.568163490354,-7.725,0.2));+#3100=ORIENTED_EDGE('',*,*,#3101,.T.);+#3101=EDGE_CURVE('',#3095,#3102,#3104,.T.);+#3102=VERTEX_POINT('',#3103);+#3103=CARTESIAN_POINT('',(-5.83,-7.725,-1.387778780781E-16));+#3104=LINE('',#3096,#672);+#3105=ORIENTED_EDGE('',*,*,#3106,.T.);+#3106=EDGE_CURVE('',#3102,#3107,#3109,.T.);+#3107=VERTEX_POINT('',#3108);+#3108=CARTESIAN_POINT('',(-5.83,-7.725,1.E-01));+#3109=LINE('',#3103,#658);+#3110=ORIENTED_EDGE('',*,*,#3111,.T.);+#3111=EDGE_CURVE('',#3107,#3112,#3114,.T.);+#3112=VERTEX_POINT('',#3113);+#3113=CARTESIAN_POINT('',(-5.568163490354,-7.725,0.1));+#3114=LINE('',#3108,#622);+#3115=ORIENTED_EDGE('',*,*,#3116,.T.);+#3116=EDGE_CURVE('',#3112,#3117,#3119,.T.);+#3117=VERTEX_POINT('',#3118);+#3118=CARTESIAN_POINT('',(-5.469682715053,-7.725,0.182635182233));+#3119=CIRCLE('',#3120,0.1);+#3120=AXIS2_PLACEMENT_3D('',#3099,#2975,#2976);+#3121=ORIENTED_EDGE('',*,*,#3122,.T.);+#3122=EDGE_CURVE('',#3117,#3123,#3125,.T.);+#3123=VERTEX_POINT('',#3124);+#3124=CARTESIAN_POINT('',(-5.376961550602,-7.725,0.734729635533));+#3125=LINE('',#3118,#2982);+#3126=ORIENTED_EDGE('',*,*,#3127,.T.);+#3127=EDGE_CURVE('',#3123,#3128,#3129,.T.);+#3128=VERTEX_POINT('',#3072);+#3129=CIRCLE('',#3130,0.2);+#3130=AXIS2_PLACEMENT_3D('',#3087,#2989,#2990);+#3131=ORIENTED_EDGE('',*,*,#3132,.T.);+#3132=EDGE_CURVE('',#3128,#700,#3071,.T.);+#3133=PLANE('',#3134);+#3134=AXIS2_PLACEMENT_3D('',#3135,#685,#13);+#3135=CARTESIAN_POINT('',(-5.377811491544,-7.725,0.447016202907));+#3136=ADVANCED_FACE('',(#3137),#3151,.F.);+#3137=FACE_BOUND('',#3138,.F.);+#3138=EDGE_LOOP('',(#3139,#3140,#3147,#3150));+#3139=ORIENTED_EDGE('',*,*,#723,.T.);+#3140=ORIENTED_EDGE('',*,*,#3141,.T.);+#3141=EDGE_CURVE('',#718,#3142,#3144,.T.);+#3142=VERTEX_POINT('',#3143);+#3143=CARTESIAN_POINT('',(-5.278480775301,-7.475,0.717364817767));+#3144=CIRCLE('',#3145,1.E-01);+#3145=AXIS2_PLACEMENT_3D('',#3146,#2936,#2937);+#3146=CARTESIAN_POINT('',(-5.18,-7.475,0.7));+#3147=ORIENTED_EDGE('',*,*,#3148,.F.);+#3148=EDGE_CURVE('',#3083,#3142,#3149,.T.);+#3149=LINE('',#3084,#684);+#3150=ORIENTED_EDGE('',*,*,#3082,.F.);+#3151=CYLINDRICAL_SURFACE('',#3086,1.E-01);+#3152=ADVANCED_FACE('',(#3153),#3202,.T.);+#3153=FACE_BOUND('',#3154,.T.);+#3154=EDGE_LOOP('',(#730,#716,#3140,#3155,#3160,#3167,#3172,#3177,#3182,#3188,#3193,#3199));+#3155=ORIENTED_EDGE('',*,*,#3156,.T.);+#3156=EDGE_CURVE('',#3142,#3157,#3159,.T.);+#3157=VERTEX_POINT('',#3158);+#3158=CARTESIAN_POINT('',(-5.371201939752,-7.475,0.165270364467));+#3159=LINE('',#3143,#2943);+#3160=ORIENTED_EDGE('',*,*,#3161,.T.);+#3161=EDGE_CURVE('',#3157,#3162,#3164,.T.);+#3162=VERTEX_POINT('',#3163);+#3163=CARTESIAN_POINT('',(-5.568163490354,-7.475,-1.387778780781E-16));+#3164=CIRCLE('',#3165,0.2);+#3165=AXIS2_PLACEMENT_3D('',#3166,#2952,#2953);+#3166=CARTESIAN_POINT('',(-5.568163490354,-7.475,0.2));+#3167=ORIENTED_EDGE('',*,*,#3168,.T.);+#3168=EDGE_CURVE('',#3162,#3169,#3171,.T.);+#3169=VERTEX_POINT('',#3170);+#3170=CARTESIAN_POINT('',(-5.83,-7.475,-1.387778780781E-16));+#3171=LINE('',#3163,#672);+#3172=ORIENTED_EDGE('',*,*,#3173,.T.);+#3173=EDGE_CURVE('',#3169,#3174,#3176,.T.);+#3174=VERTEX_POINT('',#3175);+#3175=CARTESIAN_POINT('',(-5.83,-7.475,1.E-01));+#3176=LINE('',#3170,#658);+#3177=ORIENTED_EDGE('',*,*,#3178,.T.);+#3178=EDGE_CURVE('',#3174,#3179,#3181,.T.);+#3179=VERTEX_POINT('',#3180);+#3180=CARTESIAN_POINT('',(-5.568163490354,-7.475,0.1));+#3181=LINE('',#3175,#622);+#3182=ORIENTED_EDGE('',*,*,#3183,.T.);+#3183=EDGE_CURVE('',#3179,#3184,#3186,.T.);+#3184=VERTEX_POINT('',#3185);+#3185=CARTESIAN_POINT('',(-5.469682715053,-7.475,0.182635182233));+#3186=CIRCLE('',#3187,0.1);+#3187=AXIS2_PLACEMENT_3D('',#3166,#2975,#2976);+#3188=ORIENTED_EDGE('',*,*,#3189,.T.);+#3189=EDGE_CURVE('',#3184,#3190,#3192,.T.);+#3190=VERTEX_POINT('',#3191);+#3191=CARTESIAN_POINT('',(-5.376961550602,-7.475,0.734729635533));+#3192=LINE('',#3185,#2982);+#3193=ORIENTED_EDGE('',*,*,#3194,.T.);+#3194=EDGE_CURVE('',#3190,#3195,#3197,.T.);+#3195=VERTEX_POINT('',#3196);+#3196=CARTESIAN_POINT('',(-5.18,-7.475,0.9));+#3197=CIRCLE('',#3198,0.2);+#3198=AXIS2_PLACEMENT_3D('',#3146,#2989,#2990);+#3199=ORIENTED_EDGE('',*,*,#3200,.T.);+#3200=EDGE_CURVE('',#3195,#732,#3201,.T.);+#3201=LINE('',#3196,#622);+#3202=PLANE('',#3203);+#3203=AXIS2_PLACEMENT_3D('',#3204,#685,#13);+#3204=CARTESIAN_POINT('',(-5.377811491544,-7.475,0.447016202907));+#3205=ADVANCED_FACE('',(#3206),#628,.F.);+#3206=FACE_BOUND('',#3207,.F.);+#3207=EDGE_LOOP('',(#3208,#3209,#3213,#3214));+#3208=ORIENTED_EDGE('',*,*,#744,.T.);+#3209=ORIENTED_EDGE('',*,*,#3210,.T.);+#3210=EDGE_CURVE('',#739,#2473,#3211,.T.);+#3211=LINE('',#3212,#622);+#3212=CARTESIAN_POINT('',(-5.18,-6.925,0.9));+#3213=ORIENTED_EDGE('',*,*,#2472,.F.);+#3214=ORIENTED_EDGE('',*,*,#3215,.F.);+#3215=EDGE_CURVE('',#732,#2469,#3201,.T.);+#3216=ADVANCED_FACE('',(#3217),#3273,.F.);+#3217=FACE_BOUND('',#3218,.F.);+#3218=EDGE_LOOP('',(#3219,#3220,#3221,#3228,#3233,#3240,#3245,#3250,#3255,#3261,#3266,#3271));+#3219=ORIENTED_EDGE('',*,*,#738,.F.);+#3220=ORIENTED_EDGE('',*,*,#749,.T.);+#3221=ORIENTED_EDGE('',*,*,#3222,.T.);+#3222=EDGE_CURVE('',#750,#3223,#3225,.T.);+#3223=VERTEX_POINT('',#3224);+#3224=CARTESIAN_POINT('',(-5.278480775301,-6.925,0.717364817767));+#3225=CIRCLE('',#3226,1.E-01);+#3226=AXIS2_PLACEMENT_3D('',#3227,#2936,#2937);+#3227=CARTESIAN_POINT('',(-5.18,-6.925,0.7));+#3228=ORIENTED_EDGE('',*,*,#3229,.T.);+#3229=EDGE_CURVE('',#3223,#3230,#3232,.T.);+#3230=VERTEX_POINT('',#3231);+#3231=CARTESIAN_POINT('',(-5.371201939752,-6.925,0.165270364467));+#3232=LINE('',#3224,#2943);+#3233=ORIENTED_EDGE('',*,*,#3234,.T.);+#3234=EDGE_CURVE('',#3230,#3235,#3237,.T.);+#3235=VERTEX_POINT('',#3236);+#3236=CARTESIAN_POINT('',(-5.568163490354,-6.925,-1.387778780781E-16));+#3237=CIRCLE('',#3238,0.2);+#3238=AXIS2_PLACEMENT_3D('',#3239,#2952,#2953);+#3239=CARTESIAN_POINT('',(-5.568163490354,-6.925,0.2));+#3240=ORIENTED_EDGE('',*,*,#3241,.T.);+#3241=EDGE_CURVE('',#3235,#3242,#3244,.T.);+#3242=VERTEX_POINT('',#3243);+#3243=CARTESIAN_POINT('',(-5.83,-6.925,-1.387778780781E-16));+#3244=LINE('',#3236,#672);+#3245=ORIENTED_EDGE('',*,*,#3246,.T.);+#3246=EDGE_CURVE('',#3242,#3247,#3249,.T.);+#3247=VERTEX_POINT('',#3248);+#3248=CARTESIAN_POINT('',(-5.83,-6.925,1.E-01));+#3249=LINE('',#3243,#658);+#3250=ORIENTED_EDGE('',*,*,#3251,.T.);+#3251=EDGE_CURVE('',#3247,#3252,#3254,.T.);+#3252=VERTEX_POINT('',#3253);+#3253=CARTESIAN_POINT('',(-5.568163490354,-6.925,0.1));+#3254=LINE('',#3248,#622);+#3255=ORIENTED_EDGE('',*,*,#3256,.T.);+#3256=EDGE_CURVE('',#3252,#3257,#3259,.T.);+#3257=VERTEX_POINT('',#3258);+#3258=CARTESIAN_POINT('',(-5.469682715053,-6.925,0.182635182233));+#3259=CIRCLE('',#3260,0.1);+#3260=AXIS2_PLACEMENT_3D('',#3239,#2975,#2976);+#3261=ORIENTED_EDGE('',*,*,#3262,.T.);+#3262=EDGE_CURVE('',#3257,#3263,#3265,.T.);+#3263=VERTEX_POINT('',#3264);+#3264=CARTESIAN_POINT('',(-5.376961550602,-6.925,0.734729635533));+#3265=LINE('',#3258,#2982);+#3266=ORIENTED_EDGE('',*,*,#3267,.T.);+#3267=EDGE_CURVE('',#3263,#3268,#3269,.T.);+#3268=VERTEX_POINT('',#3212);+#3269=CIRCLE('',#3270,0.2);+#3270=AXIS2_PLACEMENT_3D('',#3227,#2989,#2990);+#3271=ORIENTED_EDGE('',*,*,#3272,.T.);+#3272=EDGE_CURVE('',#3268,#739,#3211,.T.);+#3273=PLANE('',#3274);+#3274=AXIS2_PLACEMENT_3D('',#3275,#685,#13);+#3275=CARTESIAN_POINT('',(-5.377811491544,-6.925,0.447016202907));+#3276=ADVANCED_FACE('',(#3277),#3291,.F.);+#3277=FACE_BOUND('',#3278,.F.);+#3278=EDGE_LOOP('',(#3279,#3280,#3287,#3290));+#3279=ORIENTED_EDGE('',*,*,#762,.T.);+#3280=ORIENTED_EDGE('',*,*,#3281,.T.);+#3281=EDGE_CURVE('',#757,#3282,#3284,.T.);+#3282=VERTEX_POINT('',#3283);+#3283=CARTESIAN_POINT('',(-5.278480775301,-6.675,0.717364817767));+#3284=CIRCLE('',#3285,1.E-01);+#3285=AXIS2_PLACEMENT_3D('',#3286,#2936,#2937);+#3286=CARTESIAN_POINT('',(-5.18,-6.675,0.7));+#3287=ORIENTED_EDGE('',*,*,#3288,.F.);+#3288=EDGE_CURVE('',#3223,#3282,#3289,.T.);+#3289=LINE('',#3224,#684);+#3290=ORIENTED_EDGE('',*,*,#3222,.F.);+#3291=CYLINDRICAL_SURFACE('',#3226,1.E-01);+#3292=ADVANCED_FACE('',(#3293),#3342,.T.);+#3293=FACE_BOUND('',#3294,.T.);+#3294=EDGE_LOOP('',(#769,#755,#3280,#3295,#3300,#3307,#3312,#3317,#3322,#3328,#3333,#3339));+#3295=ORIENTED_EDGE('',*,*,#3296,.T.);+#3296=EDGE_CURVE('',#3282,#3297,#3299,.T.);+#3297=VERTEX_POINT('',#3298);+#3298=CARTESIAN_POINT('',(-5.371201939752,-6.675,0.165270364467));+#3299=LINE('',#3283,#2943);+#3300=ORIENTED_EDGE('',*,*,#3301,.T.);+#3301=EDGE_CURVE('',#3297,#3302,#3304,.T.);+#3302=VERTEX_POINT('',#3303);+#3303=CARTESIAN_POINT('',(-5.568163490354,-6.675,-1.387778780781E-16));+#3304=CIRCLE('',#3305,0.2);+#3305=AXIS2_PLACEMENT_3D('',#3306,#2952,#2953);+#3306=CARTESIAN_POINT('',(-5.568163490354,-6.675,0.2));+#3307=ORIENTED_EDGE('',*,*,#3308,.T.);+#3308=EDGE_CURVE('',#3302,#3309,#3311,.T.);+#3309=VERTEX_POINT('',#3310);+#3310=CARTESIAN_POINT('',(-5.83,-6.675,-1.387778780781E-16));+#3311=LINE('',#3303,#672);+#3312=ORIENTED_EDGE('',*,*,#3313,.T.);+#3313=EDGE_CURVE('',#3309,#3314,#3316,.T.);+#3314=VERTEX_POINT('',#3315);+#3315=CARTESIAN_POINT('',(-5.83,-6.675,1.E-01));+#3316=LINE('',#3310,#658);+#3317=ORIENTED_EDGE('',*,*,#3318,.T.);+#3318=EDGE_CURVE('',#3314,#3319,#3321,.T.);+#3319=VERTEX_POINT('',#3320);+#3320=CARTESIAN_POINT('',(-5.568163490354,-6.675,0.1));+#3321=LINE('',#3315,#622);+#3322=ORIENTED_EDGE('',*,*,#3323,.T.);+#3323=EDGE_CURVE('',#3319,#3324,#3326,.T.);+#3324=VERTEX_POINT('',#3325);+#3325=CARTESIAN_POINT('',(-5.469682715053,-6.675,0.182635182233));+#3326=CIRCLE('',#3327,0.1);+#3327=AXIS2_PLACEMENT_3D('',#3306,#2975,#2976);+#3328=ORIENTED_EDGE('',*,*,#3329,.T.);+#3329=EDGE_CURVE('',#3324,#3330,#3332,.T.);+#3330=VERTEX_POINT('',#3331);+#3331=CARTESIAN_POINT('',(-5.376961550602,-6.675,0.734729635533));+#3332=LINE('',#3325,#2982);+#3333=ORIENTED_EDGE('',*,*,#3334,.T.);+#3334=EDGE_CURVE('',#3330,#3335,#3337,.T.);+#3335=VERTEX_POINT('',#3336);+#3336=CARTESIAN_POINT('',(-5.18,-6.675,0.9));+#3337=CIRCLE('',#3338,0.2);+#3338=AXIS2_PLACEMENT_3D('',#3286,#2989,#2990);+#3339=ORIENTED_EDGE('',*,*,#3340,.T.);+#3340=EDGE_CURVE('',#3335,#771,#3341,.T.);+#3341=LINE('',#3336,#622);+#3342=PLANE('',#3343);+#3343=AXIS2_PLACEMENT_3D('',#3344,#685,#13);+#3344=CARTESIAN_POINT('',(-5.377811491544,-6.675,0.447016202907));+#3345=ADVANCED_FACE('',(#3346),#628,.F.);+#3346=FACE_BOUND('',#3347,.F.);+#3347=EDGE_LOOP('',(#3348,#3349,#3353,#3354));+#3348=ORIENTED_EDGE('',*,*,#783,.T.);+#3349=ORIENTED_EDGE('',*,*,#3350,.T.);+#3350=EDGE_CURVE('',#778,#2481,#3351,.T.);+#3351=LINE('',#3352,#622);+#3352=CARTESIAN_POINT('',(-5.18,-6.125,0.9));+#3353=ORIENTED_EDGE('',*,*,#2480,.F.);+#3354=ORIENTED_EDGE('',*,*,#3355,.F.);+#3355=EDGE_CURVE('',#771,#2477,#3341,.T.);+#3356=ADVANCED_FACE('',(#3357),#3413,.F.);+#3357=FACE_BOUND('',#3358,.F.);+#3358=EDGE_LOOP('',(#3359,#3360,#3361,#3368,#3373,#3380,#3385,#3390,#3395,#3401,#3406,#3411));+#3359=ORIENTED_EDGE('',*,*,#777,.F.);+#3360=ORIENTED_EDGE('',*,*,#788,.T.);+#3361=ORIENTED_EDGE('',*,*,#3362,.T.);+#3362=EDGE_CURVE('',#789,#3363,#3365,.T.);+#3363=VERTEX_POINT('',#3364);+#3364=CARTESIAN_POINT('',(-5.278480775301,-6.125,0.717364817767));+#3365=CIRCLE('',#3366,1.E-01);+#3366=AXIS2_PLACEMENT_3D('',#3367,#2936,#2937);+#3367=CARTESIAN_POINT('',(-5.18,-6.125,0.7));+#3368=ORIENTED_EDGE('',*,*,#3369,.T.);+#3369=EDGE_CURVE('',#3363,#3370,#3372,.T.);+#3370=VERTEX_POINT('',#3371);+#3371=CARTESIAN_POINT('',(-5.371201939752,-6.125,0.165270364467));+#3372=LINE('',#3364,#2943);+#3373=ORIENTED_EDGE('',*,*,#3374,.T.);+#3374=EDGE_CURVE('',#3370,#3375,#3377,.T.);+#3375=VERTEX_POINT('',#3376);+#3376=CARTESIAN_POINT('',(-5.568163490354,-6.125,-1.387778780781E-16));+#3377=CIRCLE('',#3378,0.2);+#3378=AXIS2_PLACEMENT_3D('',#3379,#2952,#2953);+#3379=CARTESIAN_POINT('',(-5.568163490354,-6.125,0.2));+#3380=ORIENTED_EDGE('',*,*,#3381,.T.);+#3381=EDGE_CURVE('',#3375,#3382,#3384,.T.);+#3382=VERTEX_POINT('',#3383);+#3383=CARTESIAN_POINT('',(-5.83,-6.125,-1.387778780781E-16));+#3384=LINE('',#3376,#672);+#3385=ORIENTED_EDGE('',*,*,#3386,.T.);+#3386=EDGE_CURVE('',#3382,#3387,#3389,.T.);+#3387=VERTEX_POINT('',#3388);+#3388=CARTESIAN_POINT('',(-5.83,-6.125,1.E-01));+#3389=LINE('',#3383,#658);+#3390=ORIENTED_EDGE('',*,*,#3391,.T.);+#3391=EDGE_CURVE('',#3387,#3392,#3394,.T.);+#3392=VERTEX_POINT('',#3393);+#3393=CARTESIAN_POINT('',(-5.568163490354,-6.125,0.1));+#3394=LINE('',#3388,#622);+#3395=ORIENTED_EDGE('',*,*,#3396,.T.);+#3396=EDGE_CURVE('',#3392,#3397,#3399,.T.);+#3397=VERTEX_POINT('',#3398);+#3398=CARTESIAN_POINT('',(-5.469682715053,-6.125,0.182635182233));+#3399=CIRCLE('',#3400,0.1);+#3400=AXIS2_PLACEMENT_3D('',#3379,#2975,#2976);+#3401=ORIENTED_EDGE('',*,*,#3402,.T.);+#3402=EDGE_CURVE('',#3397,#3403,#3405,.T.);+#3403=VERTEX_POINT('',#3404);+#3404=CARTESIAN_POINT('',(-5.376961550602,-6.125,0.734729635533));+#3405=LINE('',#3398,#2982);+#3406=ORIENTED_EDGE('',*,*,#3407,.T.);+#3407=EDGE_CURVE('',#3403,#3408,#3409,.T.);+#3408=VERTEX_POINT('',#3352);+#3409=CIRCLE('',#3410,0.2);+#3410=AXIS2_PLACEMENT_3D('',#3367,#2989,#2990);+#3411=ORIENTED_EDGE('',*,*,#3412,.T.);+#3412=EDGE_CURVE('',#3408,#778,#3351,.T.);+#3413=PLANE('',#3414);+#3414=AXIS2_PLACEMENT_3D('',#3415,#685,#13);+#3415=CARTESIAN_POINT('',(-5.377811491544,-6.125,0.447016202907));+#3416=ADVANCED_FACE('',(#3417),#3431,.F.);+#3417=FACE_BOUND('',#3418,.F.);+#3418=EDGE_LOOP('',(#3419,#3420,#3427,#3430));+#3419=ORIENTED_EDGE('',*,*,#801,.T.);+#3420=ORIENTED_EDGE('',*,*,#3421,.T.);+#3421=EDGE_CURVE('',#796,#3422,#3424,.T.);+#3422=VERTEX_POINT('',#3423);+#3423=CARTESIAN_POINT('',(-5.278480775301,-5.875,0.717364817767));+#3424=CIRCLE('',#3425,1.E-01);+#3425=AXIS2_PLACEMENT_3D('',#3426,#2936,#2937);+#3426=CARTESIAN_POINT('',(-5.18,-5.875,0.7));+#3427=ORIENTED_EDGE('',*,*,#3428,.F.);+#3428=EDGE_CURVE('',#3363,#3422,#3429,.T.);+#3429=LINE('',#3364,#684);+#3430=ORIENTED_EDGE('',*,*,#3362,.F.);+#3431=CYLINDRICAL_SURFACE('',#3366,1.E-01);+#3432=ADVANCED_FACE('',(#3433),#3482,.T.);+#3433=FACE_BOUND('',#3434,.T.);+#3434=EDGE_LOOP('',(#808,#794,#3420,#3435,#3440,#3447,#3452,#3457,#3462,#3468,#3473,#3479));+#3435=ORIENTED_EDGE('',*,*,#3436,.T.);+#3436=EDGE_CURVE('',#3422,#3437,#3439,.T.);+#3437=VERTEX_POINT('',#3438);+#3438=CARTESIAN_POINT('',(-5.371201939752,-5.875,0.165270364467));+#3439=LINE('',#3423,#2943);+#3440=ORIENTED_EDGE('',*,*,#3441,.T.);+#3441=EDGE_CURVE('',#3437,#3442,#3444,.T.);+#3442=VERTEX_POINT('',#3443);+#3443=CARTESIAN_POINT('',(-5.568163490354,-5.875,-1.387778780781E-16));+#3444=CIRCLE('',#3445,0.2);+#3445=AXIS2_PLACEMENT_3D('',#3446,#2952,#2953);+#3446=CARTESIAN_POINT('',(-5.568163490354,-5.875,0.2));+#3447=ORIENTED_EDGE('',*,*,#3448,.T.);+#3448=EDGE_CURVE('',#3442,#3449,#3451,.T.);+#3449=VERTEX_POINT('',#3450);+#3450=CARTESIAN_POINT('',(-5.83,-5.875,-1.387778780781E-16));+#3451=LINE('',#3443,#672);+#3452=ORIENTED_EDGE('',*,*,#3453,.T.);+#3453=EDGE_CURVE('',#3449,#3454,#3456,.T.);+#3454=VERTEX_POINT('',#3455);+#3455=CARTESIAN_POINT('',(-5.83,-5.875,1.E-01));+#3456=LINE('',#3450,#658);+#3457=ORIENTED_EDGE('',*,*,#3458,.T.);+#3458=EDGE_CURVE('',#3454,#3459,#3461,.T.);+#3459=VERTEX_POINT('',#3460);+#3460=CARTESIAN_POINT('',(-5.568163490354,-5.875,0.1));+#3461=LINE('',#3455,#622);+#3462=ORIENTED_EDGE('',*,*,#3463,.T.);+#3463=EDGE_CURVE('',#3459,#3464,#3466,.T.);+#3464=VERTEX_POINT('',#3465);+#3465=CARTESIAN_POINT('',(-5.469682715053,-5.875,0.182635182233));+#3466=CIRCLE('',#3467,0.1);+#3467=AXIS2_PLACEMENT_3D('',#3446,#2975,#2976);+#3468=ORIENTED_EDGE('',*,*,#3469,.T.);+#3469=EDGE_CURVE('',#3464,#3470,#3472,.T.);+#3470=VERTEX_POINT('',#3471);+#3471=CARTESIAN_POINT('',(-5.376961550602,-5.875,0.734729635533));+#3472=LINE('',#3465,#2982);+#3473=ORIENTED_EDGE('',*,*,#3474,.T.);+#3474=EDGE_CURVE('',#3470,#3475,#3477,.T.);+#3475=VERTEX_POINT('',#3476);+#3476=CARTESIAN_POINT('',(-5.18,-5.875,0.9));+#3477=CIRCLE('',#3478,0.2);+#3478=AXIS2_PLACEMENT_3D('',#3426,#2989,#2990);+#3479=ORIENTED_EDGE('',*,*,#3480,.T.);+#3480=EDGE_CURVE('',#3475,#810,#3481,.T.);+#3481=LINE('',#3476,#622);+#3482=PLANE('',#3483);+#3483=AXIS2_PLACEMENT_3D('',#3484,#685,#13);+#3484=CARTESIAN_POINT('',(-5.377811491544,-5.875,0.447016202907));+#3485=ADVANCED_FACE('',(#3486),#628,.F.);+#3486=FACE_BOUND('',#3487,.F.);+#3487=EDGE_LOOP('',(#3488,#3489,#3493,#3494));+#3488=ORIENTED_EDGE('',*,*,#822,.T.);+#3489=ORIENTED_EDGE('',*,*,#3490,.T.);+#3490=EDGE_CURVE('',#817,#2489,#3491,.T.);+#3491=LINE('',#3492,#622);+#3492=CARTESIAN_POINT('',(-5.18,-5.325,0.9));+#3493=ORIENTED_EDGE('',*,*,#2488,.F.);+#3494=ORIENTED_EDGE('',*,*,#3495,.F.);+#3495=EDGE_CURVE('',#810,#2485,#3481,.T.);+#3496=ADVANCED_FACE('',(#3497),#3553,.F.);+#3497=FACE_BOUND('',#3498,.F.);+#3498=EDGE_LOOP('',(#3499,#3500,#3501,#3508,#3513,#3520,#3525,#3530,#3535,#3541,#3546,#3551));+#3499=ORIENTED_EDGE('',*,*,#816,.F.);+#3500=ORIENTED_EDGE('',*,*,#827,.T.);+#3501=ORIENTED_EDGE('',*,*,#3502,.T.);+#3502=EDGE_CURVE('',#828,#3503,#3505,.T.);+#3503=VERTEX_POINT('',#3504);+#3504=CARTESIAN_POINT('',(-5.278480775301,-5.325,0.717364817767));+#3505=CIRCLE('',#3506,1.E-01);+#3506=AXIS2_PLACEMENT_3D('',#3507,#2936,#2937);+#3507=CARTESIAN_POINT('',(-5.18,-5.325,0.7));+#3508=ORIENTED_EDGE('',*,*,#3509,.T.);+#3509=EDGE_CURVE('',#3503,#3510,#3512,.T.);+#3510=VERTEX_POINT('',#3511);+#3511=CARTESIAN_POINT('',(-5.371201939752,-5.325,0.165270364467));+#3512=LINE('',#3504,#2943);+#3513=ORIENTED_EDGE('',*,*,#3514,.T.);+#3514=EDGE_CURVE('',#3510,#3515,#3517,.T.);+#3515=VERTEX_POINT('',#3516);+#3516=CARTESIAN_POINT('',(-5.568163490354,-5.325,-1.387778780781E-16));+#3517=CIRCLE('',#3518,0.2);+#3518=AXIS2_PLACEMENT_3D('',#3519,#2952,#2953);+#3519=CARTESIAN_POINT('',(-5.568163490354,-5.325,0.2));+#3520=ORIENTED_EDGE('',*,*,#3521,.T.);+#3521=EDGE_CURVE('',#3515,#3522,#3524,.T.);+#3522=VERTEX_POINT('',#3523);+#3523=CARTESIAN_POINT('',(-5.83,-5.325,-1.387778780781E-16));+#3524=LINE('',#3516,#672);+#3525=ORIENTED_EDGE('',*,*,#3526,.T.);+#3526=EDGE_CURVE('',#3522,#3527,#3529,.T.);+#3527=VERTEX_POINT('',#3528);+#3528=CARTESIAN_POINT('',(-5.83,-5.325,1.E-01));+#3529=LINE('',#3523,#658);+#3530=ORIENTED_EDGE('',*,*,#3531,.T.);+#3531=EDGE_CURVE('',#3527,#3532,#3534,.T.);+#3532=VERTEX_POINT('',#3533);+#3533=CARTESIAN_POINT('',(-5.568163490354,-5.325,0.1));+#3534=LINE('',#3528,#622);+#3535=ORIENTED_EDGE('',*,*,#3536,.T.);+#3536=EDGE_CURVE('',#3532,#3537,#3539,.T.);+#3537=VERTEX_POINT('',#3538);+#3538=CARTESIAN_POINT('',(-5.469682715053,-5.325,0.182635182233));+#3539=CIRCLE('',#3540,0.1);+#3540=AXIS2_PLACEMENT_3D('',#3519,#2975,#2976);+#3541=ORIENTED_EDGE('',*,*,#3542,.T.);+#3542=EDGE_CURVE('',#3537,#3543,#3545,.T.);+#3543=VERTEX_POINT('',#3544);+#3544=CARTESIAN_POINT('',(-5.376961550602,-5.325,0.734729635533));+#3545=LINE('',#3538,#2982);+#3546=ORIENTED_EDGE('',*,*,#3547,.T.);+#3547=EDGE_CURVE('',#3543,#3548,#3549,.T.);+#3548=VERTEX_POINT('',#3492);+#3549=CIRCLE('',#3550,0.2);+#3550=AXIS2_PLACEMENT_3D('',#3507,#2989,#2990);+#3551=ORIENTED_EDGE('',*,*,#3552,.T.);+#3552=EDGE_CURVE('',#3548,#817,#3491,.T.);+#3553=PLANE('',#3554);+#3554=AXIS2_PLACEMENT_3D('',#3555,#685,#13);+#3555=CARTESIAN_POINT('',(-5.377811491544,-5.325,0.447016202907));+#3556=ADVANCED_FACE('',(#3557),#3571,.F.);+#3557=FACE_BOUND('',#3558,.F.);+#3558=EDGE_LOOP('',(#3559,#3560,#3567,#3570));+#3559=ORIENTED_EDGE('',*,*,#840,.T.);+#3560=ORIENTED_EDGE('',*,*,#3561,.T.);+#3561=EDGE_CURVE('',#835,#3562,#3564,.T.);+#3562=VERTEX_POINT('',#3563);+#3563=CARTESIAN_POINT('',(-5.278480775301,-5.075,0.717364817767));+#3564=CIRCLE('',#3565,1.E-01);+#3565=AXIS2_PLACEMENT_3D('',#3566,#2936,#2937);+#3566=CARTESIAN_POINT('',(-5.18,-5.075,0.7));+#3567=ORIENTED_EDGE('',*,*,#3568,.F.);+#3568=EDGE_CURVE('',#3503,#3562,#3569,.T.);+#3569=LINE('',#3504,#684);+#3570=ORIENTED_EDGE('',*,*,#3502,.F.);+#3571=CYLINDRICAL_SURFACE('',#3506,1.E-01);+#3572=ADVANCED_FACE('',(#3573),#3622,.T.);+#3573=FACE_BOUND('',#3574,.T.);+#3574=EDGE_LOOP('',(#847,#833,#3560,#3575,#3580,#3587,#3592,#3597,#3602,#3608,#3613,#3619));+#3575=ORIENTED_EDGE('',*,*,#3576,.T.);+#3576=EDGE_CURVE('',#3562,#3577,#3579,.T.);+#3577=VERTEX_POINT('',#3578);+#3578=CARTESIAN_POINT('',(-5.371201939752,-5.075,0.165270364467));+#3579=LINE('',#3563,#2943);+#3580=ORIENTED_EDGE('',*,*,#3581,.T.);+#3581=EDGE_CURVE('',#3577,#3582,#3584,.T.);+#3582=VERTEX_POINT('',#3583);+#3583=CARTESIAN_POINT('',(-5.568163490354,-5.075,-1.387778780781E-16));+#3584=CIRCLE('',#3585,0.2);+#3585=AXIS2_PLACEMENT_3D('',#3586,#2952,#2953);+#3586=CARTESIAN_POINT('',(-5.568163490354,-5.075,0.2));+#3587=ORIENTED_EDGE('',*,*,#3588,.T.);+#3588=EDGE_CURVE('',#3582,#3589,#3591,.T.);+#3589=VERTEX_POINT('',#3590);+#3590=CARTESIAN_POINT('',(-5.83,-5.075,-1.387778780781E-16));+#3591=LINE('',#3583,#672);+#3592=ORIENTED_EDGE('',*,*,#3593,.T.);+#3593=EDGE_CURVE('',#3589,#3594,#3596,.T.);+#3594=VERTEX_POINT('',#3595);+#3595=CARTESIAN_POINT('',(-5.83,-5.075,1.E-01));+#3596=LINE('',#3590,#658);+#3597=ORIENTED_EDGE('',*,*,#3598,.T.);+#3598=EDGE_CURVE('',#3594,#3599,#3601,.T.);+#3599=VERTEX_POINT('',#3600);+#3600=CARTESIAN_POINT('',(-5.568163490354,-5.075,0.1));+#3601=LINE('',#3595,#622);+#3602=ORIENTED_EDGE('',*,*,#3603,.T.);+#3603=EDGE_CURVE('',#3599,#3604,#3606,.T.);+#3604=VERTEX_POINT('',#3605);+#3605=CARTESIAN_POINT('',(-5.469682715053,-5.075,0.182635182233));+#3606=CIRCLE('',#3607,0.1);+#3607=AXIS2_PLACEMENT_3D('',#3586,#2975,#2976);+#3608=ORIENTED_EDGE('',*,*,#3609,.T.);+#3609=EDGE_CURVE('',#3604,#3610,#3612,.T.);+#3610=VERTEX_POINT('',#3611);+#3611=CARTESIAN_POINT('',(-5.376961550602,-5.075,0.734729635533));+#3612=LINE('',#3605,#2982);+#3613=ORIENTED_EDGE('',*,*,#3614,.T.);+#3614=EDGE_CURVE('',#3610,#3615,#3617,.T.);+#3615=VERTEX_POINT('',#3616);+#3616=CARTESIAN_POINT('',(-5.18,-5.075,0.9));+#3617=CIRCLE('',#3618,0.2);+#3618=AXIS2_PLACEMENT_3D('',#3566,#2989,#2990);+#3619=ORIENTED_EDGE('',*,*,#3620,.T.);+#3620=EDGE_CURVE('',#3615,#849,#3621,.T.);+#3621=LINE('',#3616,#622);+#3622=PLANE('',#3623);+#3623=AXIS2_PLACEMENT_3D('',#3624,#685,#13);+#3624=CARTESIAN_POINT('',(-5.377811491544,-5.075,0.447016202907));+#3625=ADVANCED_FACE('',(#3626),#628,.F.);+#3626=FACE_BOUND('',#3627,.F.);+#3627=EDGE_LOOP('',(#3628,#3629,#3633,#3634));+#3628=ORIENTED_EDGE('',*,*,#861,.T.);+#3629=ORIENTED_EDGE('',*,*,#3630,.T.);+#3630=EDGE_CURVE('',#856,#2497,#3631,.T.);+#3631=LINE('',#3632,#622);+#3632=CARTESIAN_POINT('',(-5.18,-4.525,0.9));+#3633=ORIENTED_EDGE('',*,*,#2496,.F.);+#3634=ORIENTED_EDGE('',*,*,#3635,.F.);+#3635=EDGE_CURVE('',#849,#2493,#3621,.T.);+#3636=ADVANCED_FACE('',(#3637),#3693,.F.);+#3637=FACE_BOUND('',#3638,.F.);+#3638=EDGE_LOOP('',(#3639,#3640,#3641,#3648,#3653,#3660,#3665,#3670,#3675,#3681,#3686,#3691));+#3639=ORIENTED_EDGE('',*,*,#855,.F.);+#3640=ORIENTED_EDGE('',*,*,#866,.T.);+#3641=ORIENTED_EDGE('',*,*,#3642,.T.);+#3642=EDGE_CURVE('',#867,#3643,#3645,.T.);+#3643=VERTEX_POINT('',#3644);+#3644=CARTESIAN_POINT('',(-5.278480775301,-4.525,0.717364817767));+#3645=CIRCLE('',#3646,1.E-01);+#3646=AXIS2_PLACEMENT_3D('',#3647,#2936,#2937);+#3647=CARTESIAN_POINT('',(-5.18,-4.525,0.7));+#3648=ORIENTED_EDGE('',*,*,#3649,.T.);+#3649=EDGE_CURVE('',#3643,#3650,#3652,.T.);+#3650=VERTEX_POINT('',#3651);+#3651=CARTESIAN_POINT('',(-5.371201939752,-4.525,0.165270364467));+#3652=LINE('',#3644,#2943);+#3653=ORIENTED_EDGE('',*,*,#3654,.T.);+#3654=EDGE_CURVE('',#3650,#3655,#3657,.T.);+#3655=VERTEX_POINT('',#3656);+#3656=CARTESIAN_POINT('',(-5.568163490354,-4.525,-1.387778780781E-16));+#3657=CIRCLE('',#3658,0.2);+#3658=AXIS2_PLACEMENT_3D('',#3659,#2952,#2953);+#3659=CARTESIAN_POINT('',(-5.568163490354,-4.525,0.2));+#3660=ORIENTED_EDGE('',*,*,#3661,.T.);+#3661=EDGE_CURVE('',#3655,#3662,#3664,.T.);+#3662=VERTEX_POINT('',#3663);+#3663=CARTESIAN_POINT('',(-5.83,-4.525,-1.387778780781E-16));+#3664=LINE('',#3656,#672);+#3665=ORIENTED_EDGE('',*,*,#3666,.T.);+#3666=EDGE_CURVE('',#3662,#3667,#3669,.T.);+#3667=VERTEX_POINT('',#3668);+#3668=CARTESIAN_POINT('',(-5.83,-4.525,1.E-01));+#3669=LINE('',#3663,#658);+#3670=ORIENTED_EDGE('',*,*,#3671,.T.);+#3671=EDGE_CURVE('',#3667,#3672,#3674,.T.);+#3672=VERTEX_POINT('',#3673);+#3673=CARTESIAN_POINT('',(-5.568163490354,-4.525,0.1));+#3674=LINE('',#3668,#622);+#3675=ORIENTED_EDGE('',*,*,#3676,.T.);+#3676=EDGE_CURVE('',#3672,#3677,#3679,.T.);+#3677=VERTEX_POINT('',#3678);+#3678=CARTESIAN_POINT('',(-5.469682715053,-4.525,0.182635182233));+#3679=CIRCLE('',#3680,0.1);+#3680=AXIS2_PLACEMENT_3D('',#3659,#2975,#2976);+#3681=ORIENTED_EDGE('',*,*,#3682,.T.);+#3682=EDGE_CURVE('',#3677,#3683,#3685,.T.);+#3683=VERTEX_POINT('',#3684);+#3684=CARTESIAN_POINT('',(-5.376961550602,-4.525,0.734729635533));+#3685=LINE('',#3678,#2982);+#3686=ORIENTED_EDGE('',*,*,#3687,.T.);+#3687=EDGE_CURVE('',#3683,#3688,#3689,.T.);+#3688=VERTEX_POINT('',#3632);+#3689=CIRCLE('',#3690,0.2);+#3690=AXIS2_PLACEMENT_3D('',#3647,#2989,#2990);+#3691=ORIENTED_EDGE('',*,*,#3692,.T.);+#3692=EDGE_CURVE('',#3688,#856,#3631,.T.);+#3693=PLANE('',#3694);+#3694=AXIS2_PLACEMENT_3D('',#3695,#685,#13);+#3695=CARTESIAN_POINT('',(-5.377811491544,-4.525,0.447016202907));+#3696=ADVANCED_FACE('',(#3697),#3711,.F.);+#3697=FACE_BOUND('',#3698,.F.);+#3698=EDGE_LOOP('',(#3699,#3700,#3707,#3710));+#3699=ORIENTED_EDGE('',*,*,#879,.T.);+#3700=ORIENTED_EDGE('',*,*,#3701,.T.);+#3701=EDGE_CURVE('',#874,#3702,#3704,.T.);+#3702=VERTEX_POINT('',#3703);+#3703=CARTESIAN_POINT('',(-5.278480775301,-4.275,0.717364817767));+#3704=CIRCLE('',#3705,1.E-01);+#3705=AXIS2_PLACEMENT_3D('',#3706,#2936,#2937);+#3706=CARTESIAN_POINT('',(-5.18,-4.275,0.7));+#3707=ORIENTED_EDGE('',*,*,#3708,.F.);+#3708=EDGE_CURVE('',#3643,#3702,#3709,.T.);+#3709=LINE('',#3644,#684);+#3710=ORIENTED_EDGE('',*,*,#3642,.F.);+#3711=CYLINDRICAL_SURFACE('',#3646,1.E-01);+#3712=ADVANCED_FACE('',(#3713),#3762,.T.);+#3713=FACE_BOUND('',#3714,.T.);+#3714=EDGE_LOOP('',(#886,#872,#3700,#3715,#3720,#3727,#3732,#3737,#3742,#3748,#3753,#3759));+#3715=ORIENTED_EDGE('',*,*,#3716,.T.);+#3716=EDGE_CURVE('',#3702,#3717,#3719,.T.);+#3717=VERTEX_POINT('',#3718);+#3718=CARTESIAN_POINT('',(-5.371201939752,-4.275,0.165270364467));+#3719=LINE('',#3703,#2943);+#3720=ORIENTED_EDGE('',*,*,#3721,.T.);+#3721=EDGE_CURVE('',#3717,#3722,#3724,.T.);+#3722=VERTEX_POINT('',#3723);+#3723=CARTESIAN_POINT('',(-5.568163490354,-4.275,-1.387778780781E-16));+#3724=CIRCLE('',#3725,0.2);+#3725=AXIS2_PLACEMENT_3D('',#3726,#2952,#2953);+#3726=CARTESIAN_POINT('',(-5.568163490354,-4.275,0.2));+#3727=ORIENTED_EDGE('',*,*,#3728,.T.);+#3728=EDGE_CURVE('',#3722,#3729,#3731,.T.);+#3729=VERTEX_POINT('',#3730);+#3730=CARTESIAN_POINT('',(-5.83,-4.275,-1.387778780781E-16));+#3731=LINE('',#3723,#672);+#3732=ORIENTED_EDGE('',*,*,#3733,.T.);+#3733=EDGE_CURVE('',#3729,#3734,#3736,.T.);+#3734=VERTEX_POINT('',#3735);+#3735=CARTESIAN_POINT('',(-5.83,-4.275,1.E-01));+#3736=LINE('',#3730,#658);+#3737=ORIENTED_EDGE('',*,*,#3738,.T.);+#3738=EDGE_CURVE('',#3734,#3739,#3741,.T.);+#3739=VERTEX_POINT('',#3740);+#3740=CARTESIAN_POINT('',(-5.568163490354,-4.275,0.1));+#3741=LINE('',#3735,#622);+#3742=ORIENTED_EDGE('',*,*,#3743,.T.);+#3743=EDGE_CURVE('',#3739,#3744,#3746,.T.);+#3744=VERTEX_POINT('',#3745);+#3745=CARTESIAN_POINT('',(-5.469682715053,-4.275,0.182635182233));+#3746=CIRCLE('',#3747,0.1);+#3747=AXIS2_PLACEMENT_3D('',#3726,#2975,#2976);+#3748=ORIENTED_EDGE('',*,*,#3749,.T.);+#3749=EDGE_CURVE('',#3744,#3750,#3752,.T.);+#3750=VERTEX_POINT('',#3751);+#3751=CARTESIAN_POINT('',(-5.376961550602,-4.275,0.734729635533));+#3752=LINE('',#3745,#2982);+#3753=ORIENTED_EDGE('',*,*,#3754,.T.);+#3754=EDGE_CURVE('',#3750,#3755,#3757,.T.);+#3755=VERTEX_POINT('',#3756);+#3756=CARTESIAN_POINT('',(-5.18,-4.275,0.9));+#3757=CIRCLE('',#3758,0.2);+#3758=AXIS2_PLACEMENT_3D('',#3706,#2989,#2990);+#3759=ORIENTED_EDGE('',*,*,#3760,.T.);+#3760=EDGE_CURVE('',#3755,#888,#3761,.T.);+#3761=LINE('',#3756,#622);+#3762=PLANE('',#3763);+#3763=AXIS2_PLACEMENT_3D('',#3764,#685,#13);+#3764=CARTESIAN_POINT('',(-5.377811491544,-4.275,0.447016202907));+#3765=ADVANCED_FACE('',(#3766),#628,.F.);+#3766=FACE_BOUND('',#3767,.F.);+#3767=EDGE_LOOP('',(#3768,#3769,#3773,#3774));+#3768=ORIENTED_EDGE('',*,*,#900,.T.);+#3769=ORIENTED_EDGE('',*,*,#3770,.T.);+#3770=EDGE_CURVE('',#895,#2505,#3771,.T.);+#3771=LINE('',#3772,#622);+#3772=CARTESIAN_POINT('',(-5.18,-3.725,0.9));+#3773=ORIENTED_EDGE('',*,*,#2504,.F.);+#3774=ORIENTED_EDGE('',*,*,#3775,.F.);+#3775=EDGE_CURVE('',#888,#2501,#3761,.T.);+#3776=ADVANCED_FACE('',(#3777),#3833,.F.);+#3777=FACE_BOUND('',#3778,.F.);+#3778=EDGE_LOOP('',(#3779,#3780,#3781,#3788,#3793,#3800,#3805,#3810,#3815,#3821,#3826,#3831));+#3779=ORIENTED_EDGE('',*,*,#894,.F.);+#3780=ORIENTED_EDGE('',*,*,#905,.T.);+#3781=ORIENTED_EDGE('',*,*,#3782,.T.);+#3782=EDGE_CURVE('',#906,#3783,#3785,.T.);+#3783=VERTEX_POINT('',#3784);+#3784=CARTESIAN_POINT('',(-5.278480775301,-3.725,0.717364817767));+#3785=CIRCLE('',#3786,1.E-01);+#3786=AXIS2_PLACEMENT_3D('',#3787,#2936,#2937);+#3787=CARTESIAN_POINT('',(-5.18,-3.725,0.7));+#3788=ORIENTED_EDGE('',*,*,#3789,.T.);+#3789=EDGE_CURVE('',#3783,#3790,#3792,.T.);+#3790=VERTEX_POINT('',#3791);+#3791=CARTESIAN_POINT('',(-5.371201939752,-3.725,0.165270364467));+#3792=LINE('',#3784,#2943);+#3793=ORIENTED_EDGE('',*,*,#3794,.T.);+#3794=EDGE_CURVE('',#3790,#3795,#3797,.T.);+#3795=VERTEX_POINT('',#3796);+#3796=CARTESIAN_POINT('',(-5.568163490354,-3.725,-1.387778780781E-16));+#3797=CIRCLE('',#3798,0.2);+#3798=AXIS2_PLACEMENT_3D('',#3799,#2952,#2953);+#3799=CARTESIAN_POINT('',(-5.568163490354,-3.725,0.2));+#3800=ORIENTED_EDGE('',*,*,#3801,.T.);+#3801=EDGE_CURVE('',#3795,#3802,#3804,.T.);+#3802=VERTEX_POINT('',#3803);+#3803=CARTESIAN_POINT('',(-5.83,-3.725,-1.387778780781E-16));+#3804=LINE('',#3796,#672);+#3805=ORIENTED_EDGE('',*,*,#3806,.T.);+#3806=EDGE_CURVE('',#3802,#3807,#3809,.T.);+#3807=VERTEX_POINT('',#3808);+#3808=CARTESIAN_POINT('',(-5.83,-3.725,1.E-01));+#3809=LINE('',#3803,#658);+#3810=ORIENTED_EDGE('',*,*,#3811,.T.);+#3811=EDGE_CURVE('',#3807,#3812,#3814,.T.);+#3812=VERTEX_POINT('',#3813);+#3813=CARTESIAN_POINT('',(-5.568163490354,-3.725,0.1));+#3814=LINE('',#3808,#622);+#3815=ORIENTED_EDGE('',*,*,#3816,.T.);+#3816=EDGE_CURVE('',#3812,#3817,#3819,.T.);+#3817=VERTEX_POINT('',#3818);+#3818=CARTESIAN_POINT('',(-5.469682715053,-3.725,0.182635182233));+#3819=CIRCLE('',#3820,0.1);+#3820=AXIS2_PLACEMENT_3D('',#3799,#2975,#2976);+#3821=ORIENTED_EDGE('',*,*,#3822,.T.);+#3822=EDGE_CURVE('',#3817,#3823,#3825,.T.);+#3823=VERTEX_POINT('',#3824);+#3824=CARTESIAN_POINT('',(-5.376961550602,-3.725,0.734729635533));+#3825=LINE('',#3818,#2982);+#3826=ORIENTED_EDGE('',*,*,#3827,.T.);+#3827=EDGE_CURVE('',#3823,#3828,#3829,.T.);+#3828=VERTEX_POINT('',#3772);+#3829=CIRCLE('',#3830,0.2);+#3830=AXIS2_PLACEMENT_3D('',#3787,#2989,#2990);+#3831=ORIENTED_EDGE('',*,*,#3832,.T.);+#3832=EDGE_CURVE('',#3828,#895,#3771,.T.);+#3833=PLANE('',#3834);+#3834=AXIS2_PLACEMENT_3D('',#3835,#685,#13);+#3835=CARTESIAN_POINT('',(-5.377811491544,-3.725,0.447016202907));+#3836=ADVANCED_FACE('',(#3837),#3851,.F.);+#3837=FACE_BOUND('',#3838,.F.);+#3838=EDGE_LOOP('',(#3839,#3840,#3847,#3850));+#3839=ORIENTED_EDGE('',*,*,#918,.T.);+#3840=ORIENTED_EDGE('',*,*,#3841,.T.);+#3841=EDGE_CURVE('',#913,#3842,#3844,.T.);+#3842=VERTEX_POINT('',#3843);+#3843=CARTESIAN_POINT('',(-5.278480775301,-3.475,0.717364817767));+#3844=CIRCLE('',#3845,1.E-01);+#3845=AXIS2_PLACEMENT_3D('',#3846,#2936,#2937);+#3846=CARTESIAN_POINT('',(-5.18,-3.475,0.7));+#3847=ORIENTED_EDGE('',*,*,#3848,.F.);+#3848=EDGE_CURVE('',#3783,#3842,#3849,.T.);+#3849=LINE('',#3784,#684);+#3850=ORIENTED_EDGE('',*,*,#3782,.F.);+#3851=CYLINDRICAL_SURFACE('',#3786,1.E-01);+#3852=ADVANCED_FACE('',(#3853),#3902,.T.);+#3853=FACE_BOUND('',#3854,.T.);+#3854=EDGE_LOOP('',(#925,#911,#3840,#3855,#3860,#3867,#3872,#3877,#3882,#3888,#3893,#3899));+#3855=ORIENTED_EDGE('',*,*,#3856,.T.);+#3856=EDGE_CURVE('',#3842,#3857,#3859,.T.);+#3857=VERTEX_POINT('',#3858);+#3858=CARTESIAN_POINT('',(-5.371201939752,-3.475,0.165270364467));+#3859=LINE('',#3843,#2943);+#3860=ORIENTED_EDGE('',*,*,#3861,.T.);+#3861=EDGE_CURVE('',#3857,#3862,#3864,.T.);+#3862=VERTEX_POINT('',#3863);+#3863=CARTESIAN_POINT('',(-5.568163490354,-3.475,-1.387778780781E-16));+#3864=CIRCLE('',#3865,0.2);+#3865=AXIS2_PLACEMENT_3D('',#3866,#2952,#2953);+#3866=CARTESIAN_POINT('',(-5.568163490354,-3.475,0.2));+#3867=ORIENTED_EDGE('',*,*,#3868,.T.);+#3868=EDGE_CURVE('',#3862,#3869,#3871,.T.);+#3869=VERTEX_POINT('',#3870);+#3870=CARTESIAN_POINT('',(-5.83,-3.475,-1.387778780781E-16));+#3871=LINE('',#3863,#672);+#3872=ORIENTED_EDGE('',*,*,#3873,.T.);+#3873=EDGE_CURVE('',#3869,#3874,#3876,.T.);+#3874=VERTEX_POINT('',#3875);+#3875=CARTESIAN_POINT('',(-5.83,-3.475,1.E-01));+#3876=LINE('',#3870,#658);+#3877=ORIENTED_EDGE('',*,*,#3878,.T.);+#3878=EDGE_CURVE('',#3874,#3879,#3881,.T.);+#3879=VERTEX_POINT('',#3880);+#3880=CARTESIAN_POINT('',(-5.568163490354,-3.475,0.1));+#3881=LINE('',#3875,#622);+#3882=ORIENTED_EDGE('',*,*,#3883,.T.);+#3883=EDGE_CURVE('',#3879,#3884,#3886,.T.);+#3884=VERTEX_POINT('',#3885);+#3885=CARTESIAN_POINT('',(-5.469682715053,-3.475,0.182635182233));+#3886=CIRCLE('',#3887,0.1);+#3887=AXIS2_PLACEMENT_3D('',#3866,#2975,#2976);+#3888=ORIENTED_EDGE('',*,*,#3889,.T.);+#3889=EDGE_CURVE('',#3884,#3890,#3892,.T.);+#3890=VERTEX_POINT('',#3891);+#3891=CARTESIAN_POINT('',(-5.376961550602,-3.475,0.734729635533));+#3892=LINE('',#3885,#2982);+#3893=ORIENTED_EDGE('',*,*,#3894,.T.);+#3894=EDGE_CURVE('',#3890,#3895,#3897,.T.);+#3895=VERTEX_POINT('',#3896);+#3896=CARTESIAN_POINT('',(-5.18,-3.475,0.9));+#3897=CIRCLE('',#3898,0.2);+#3898=AXIS2_PLACEMENT_3D('',#3846,#2989,#2990);+#3899=ORIENTED_EDGE('',*,*,#3900,.T.);+#3900=EDGE_CURVE('',#3895,#927,#3901,.T.);+#3901=LINE('',#3896,#622);+#3902=PLANE('',#3903);+#3903=AXIS2_PLACEMENT_3D('',#3904,#685,#13);+#3904=CARTESIAN_POINT('',(-5.377811491544,-3.475,0.447016202907));+#3905=ADVANCED_FACE('',(#3906),#628,.F.);+#3906=FACE_BOUND('',#3907,.F.);+#3907=EDGE_LOOP('',(#3908,#3909,#3913,#3914));+#3908=ORIENTED_EDGE('',*,*,#939,.T.);+#3909=ORIENTED_EDGE('',*,*,#3910,.T.);+#3910=EDGE_CURVE('',#934,#2513,#3911,.T.);+#3911=LINE('',#3912,#622);+#3912=CARTESIAN_POINT('',(-5.18,-2.925,0.9));+#3913=ORIENTED_EDGE('',*,*,#2512,.F.);+#3914=ORIENTED_EDGE('',*,*,#3915,.F.);+#3915=EDGE_CURVE('',#927,#2509,#3901,.T.);+#3916=ADVANCED_FACE('',(#3917),#3973,.F.);+#3917=FACE_BOUND('',#3918,.F.);+#3918=EDGE_LOOP('',(#3919,#3920,#3921,#3928,#3933,#3940,#3945,#3950,#3955,#3961,#3966,#3971));+#3919=ORIENTED_EDGE('',*,*,#933,.F.);+#3920=ORIENTED_EDGE('',*,*,#944,.T.);+#3921=ORIENTED_EDGE('',*,*,#3922,.T.);+#3922=EDGE_CURVE('',#945,#3923,#3925,.T.);+#3923=VERTEX_POINT('',#3924);+#3924=CARTESIAN_POINT('',(-5.278480775301,-2.925,0.717364817767));+#3925=CIRCLE('',#3926,1.E-01);+#3926=AXIS2_PLACEMENT_3D('',#3927,#2936,#2937);+#3927=CARTESIAN_POINT('',(-5.18,-2.925,0.7));+#3928=ORIENTED_EDGE('',*,*,#3929,.T.);+#3929=EDGE_CURVE('',#3923,#3930,#3932,.T.);+#3930=VERTEX_POINT('',#3931);+#3931=CARTESIAN_POINT('',(-5.371201939752,-2.925,0.165270364467));+#3932=LINE('',#3924,#2943);+#3933=ORIENTED_EDGE('',*,*,#3934,.T.);+#3934=EDGE_CURVE('',#3930,#3935,#3937,.T.);+#3935=VERTEX_POINT('',#3936);+#3936=CARTESIAN_POINT('',(-5.568163490354,-2.925,-1.387778780781E-16));+#3937=CIRCLE('',#3938,0.2);+#3938=AXIS2_PLACEMENT_3D('',#3939,#2952,#2953);+#3939=CARTESIAN_POINT('',(-5.568163490354,-2.925,0.2));+#3940=ORIENTED_EDGE('',*,*,#3941,.T.);+#3941=EDGE_CURVE('',#3935,#3942,#3944,.T.);+#3942=VERTEX_POINT('',#3943);+#3943=CARTESIAN_POINT('',(-5.83,-2.925,-1.387778780781E-16));+#3944=LINE('',#3936,#672);+#3945=ORIENTED_EDGE('',*,*,#3946,.T.);+#3946=EDGE_CURVE('',#3942,#3947,#3949,.T.);+#3947=VERTEX_POINT('',#3948);+#3948=CARTESIAN_POINT('',(-5.83,-2.925,1.E-01));+#3949=LINE('',#3943,#658);+#3950=ORIENTED_EDGE('',*,*,#3951,.T.);+#3951=EDGE_CURVE('',#3947,#3952,#3954,.T.);+#3952=VERTEX_POINT('',#3953);+#3953=CARTESIAN_POINT('',(-5.568163490354,-2.925,0.1));+#3954=LINE('',#3948,#622);+#3955=ORIENTED_EDGE('',*,*,#3956,.T.);+#3956=EDGE_CURVE('',#3952,#3957,#3959,.T.);+#3957=VERTEX_POINT('',#3958);+#3958=CARTESIAN_POINT('',(-5.469682715053,-2.925,0.182635182233));+#3959=CIRCLE('',#3960,0.1);+#3960=AXIS2_PLACEMENT_3D('',#3939,#2975,#2976);+#3961=ORIENTED_EDGE('',*,*,#3962,.T.);+#3962=EDGE_CURVE('',#3957,#3963,#3965,.T.);+#3963=VERTEX_POINT('',#3964);+#3964=CARTESIAN_POINT('',(-5.376961550602,-2.925,0.734729635533));+#3965=LINE('',#3958,#2982);+#3966=ORIENTED_EDGE('',*,*,#3967,.T.);+#3967=EDGE_CURVE('',#3963,#3968,#3969,.T.);+#3968=VERTEX_POINT('',#3912);+#3969=CIRCLE('',#3970,0.2);+#3970=AXIS2_PLACEMENT_3D('',#3927,#2989,#2990);+#3971=ORIENTED_EDGE('',*,*,#3972,.T.);+#3972=EDGE_CURVE('',#3968,#934,#3911,.T.);+#3973=PLANE('',#3974);+#3974=AXIS2_PLACEMENT_3D('',#3975,#685,#13);+#3975=CARTESIAN_POINT('',(-5.377811491544,-2.925,0.447016202907));+#3976=ADVANCED_FACE('',(#3977),#3991,.F.);+#3977=FACE_BOUND('',#3978,.F.);+#3978=EDGE_LOOP('',(#3979,#3980,#3987,#3990));+#3979=ORIENTED_EDGE('',*,*,#957,.T.);+#3980=ORIENTED_EDGE('',*,*,#3981,.T.);+#3981=EDGE_CURVE('',#952,#3982,#3984,.T.);+#3982=VERTEX_POINT('',#3983);+#3983=CARTESIAN_POINT('',(-5.278480775301,-2.675,0.717364817767));+#3984=CIRCLE('',#3985,1.E-01);+#3985=AXIS2_PLACEMENT_3D('',#3986,#2936,#2937);+#3986=CARTESIAN_POINT('',(-5.18,-2.675,0.7));+#3987=ORIENTED_EDGE('',*,*,#3988,.F.);+#3988=EDGE_CURVE('',#3923,#3982,#3989,.T.);+#3989=LINE('',#3924,#684);+#3990=ORIENTED_EDGE('',*,*,#3922,.F.);+#3991=CYLINDRICAL_SURFACE('',#3926,1.E-01);+#3992=ADVANCED_FACE('',(#3993),#4042,.T.);+#3993=FACE_BOUND('',#3994,.T.);+#3994=EDGE_LOOP('',(#964,#950,#3980,#3995,#4000,#4007,#4012,#4017,#4022,#4028,#4033,#4039));+#3995=ORIENTED_EDGE('',*,*,#3996,.T.);+#3996=EDGE_CURVE('',#3982,#3997,#3999,.T.);+#3997=VERTEX_POINT('',#3998);+#3998=CARTESIAN_POINT('',(-5.371201939752,-2.675,0.165270364467));+#3999=LINE('',#3983,#2943);+#4000=ORIENTED_EDGE('',*,*,#4001,.T.);+#4001=EDGE_CURVE('',#3997,#4002,#4004,.T.);+#4002=VERTEX_POINT('',#4003);+#4003=CARTESIAN_POINT('',(-5.568163490354,-2.675,-1.387778780781E-16));+#4004=CIRCLE('',#4005,0.2);+#4005=AXIS2_PLACEMENT_3D('',#4006,#2952,#2953);+#4006=CARTESIAN_POINT('',(-5.568163490354,-2.675,0.2));+#4007=ORIENTED_EDGE('',*,*,#4008,.T.);+#4008=EDGE_CURVE('',#4002,#4009,#4011,.T.);+#4009=VERTEX_POINT('',#4010);+#4010=CARTESIAN_POINT('',(-5.83,-2.675,-1.387778780781E-16));+#4011=LINE('',#4003,#672);+#4012=ORIENTED_EDGE('',*,*,#4013,.T.);+#4013=EDGE_CURVE('',#4009,#4014,#4016,.T.);+#4014=VERTEX_POINT('',#4015);+#4015=CARTESIAN_POINT('',(-5.83,-2.675,1.E-01));+#4016=LINE('',#4010,#658);+#4017=ORIENTED_EDGE('',*,*,#4018,.T.);+#4018=EDGE_CURVE('',#4014,#4019,#4021,.T.);+#4019=VERTEX_POINT('',#4020);+#4020=CARTESIAN_POINT('',(-5.568163490354,-2.675,0.1));+#4021=LINE('',#4015,#622);+#4022=ORIENTED_EDGE('',*,*,#4023,.T.);+#4023=EDGE_CURVE('',#4019,#4024,#4026,.T.);+#4024=VERTEX_POINT('',#4025);+#4025=CARTESIAN_POINT('',(-5.469682715053,-2.675,0.182635182233));+#4026=CIRCLE('',#4027,0.1);+#4027=AXIS2_PLACEMENT_3D('',#4006,#2975,#2976);+#4028=ORIENTED_EDGE('',*,*,#4029,.T.);+#4029=EDGE_CURVE('',#4024,#4030,#4032,.T.);+#4030=VERTEX_POINT('',#4031);+#4031=CARTESIAN_POINT('',(-5.376961550602,-2.675,0.734729635533));+#4032=LINE('',#4025,#2982);+#4033=ORIENTED_EDGE('',*,*,#4034,.T.);+#4034=EDGE_CURVE('',#4030,#4035,#4037,.T.);+#4035=VERTEX_POINT('',#4036);+#4036=CARTESIAN_POINT('',(-5.18,-2.675,0.9));+#4037=CIRCLE('',#4038,0.2);+#4038=AXIS2_PLACEMENT_3D('',#3986,#2989,#2990);+#4039=ORIENTED_EDGE('',*,*,#4040,.T.);+#4040=EDGE_CURVE('',#4035,#966,#4041,.T.);+#4041=LINE('',#4036,#622);+#4042=PLANE('',#4043);+#4043=AXIS2_PLACEMENT_3D('',#4044,#685,#13);+#4044=CARTESIAN_POINT('',(-5.377811491544,-2.675,0.447016202907));+#4045=ADVANCED_FACE('',(#4046),#628,.F.);+#4046=FACE_BOUND('',#4047,.F.);+#4047=EDGE_LOOP('',(#4048,#4049,#4053,#4054));+#4048=ORIENTED_EDGE('',*,*,#978,.T.);+#4049=ORIENTED_EDGE('',*,*,#4050,.T.);+#4050=EDGE_CURVE('',#973,#2521,#4051,.T.);+#4051=LINE('',#4052,#622);+#4052=CARTESIAN_POINT('',(-5.18,-2.125,0.9));+#4053=ORIENTED_EDGE('',*,*,#2520,.F.);+#4054=ORIENTED_EDGE('',*,*,#4055,.F.);+#4055=EDGE_CURVE('',#966,#2517,#4041,.T.);+#4056=ADVANCED_FACE('',(#4057),#4113,.F.);+#4057=FACE_BOUND('',#4058,.F.);+#4058=EDGE_LOOP('',(#4059,#4060,#4061,#4068,#4073,#4080,#4085,#4090,#4095,#4101,#4106,#4111));+#4059=ORIENTED_EDGE('',*,*,#972,.F.);+#4060=ORIENTED_EDGE('',*,*,#983,.T.);+#4061=ORIENTED_EDGE('',*,*,#4062,.T.);+#4062=EDGE_CURVE('',#984,#4063,#4065,.T.);+#4063=VERTEX_POINT('',#4064);+#4064=CARTESIAN_POINT('',(-5.278480775301,-2.125,0.717364817767));+#4065=CIRCLE('',#4066,1.E-01);+#4066=AXIS2_PLACEMENT_3D('',#4067,#2936,#2937);+#4067=CARTESIAN_POINT('',(-5.18,-2.125,0.7));+#4068=ORIENTED_EDGE('',*,*,#4069,.T.);+#4069=EDGE_CURVE('',#4063,#4070,#4072,.T.);+#4070=VERTEX_POINT('',#4071);+#4071=CARTESIAN_POINT('',(-5.371201939752,-2.125,0.165270364467));+#4072=LINE('',#4064,#2943);+#4073=ORIENTED_EDGE('',*,*,#4074,.T.);+#4074=EDGE_CURVE('',#4070,#4075,#4077,.T.);+#4075=VERTEX_POINT('',#4076);+#4076=CARTESIAN_POINT('',(-5.568163490354,-2.125,-1.387778780781E-16));+#4077=CIRCLE('',#4078,0.2);+#4078=AXIS2_PLACEMENT_3D('',#4079,#2952,#2953);+#4079=CARTESIAN_POINT('',(-5.568163490354,-2.125,0.2));+#4080=ORIENTED_EDGE('',*,*,#4081,.T.);+#4081=EDGE_CURVE('',#4075,#4082,#4084,.T.);+#4082=VERTEX_POINT('',#4083);+#4083=CARTESIAN_POINT('',(-5.83,-2.125,-1.387778780781E-16));+#4084=LINE('',#4076,#672);+#4085=ORIENTED_EDGE('',*,*,#4086,.T.);+#4086=EDGE_CURVE('',#4082,#4087,#4089,.T.);+#4087=VERTEX_POINT('',#4088);+#4088=CARTESIAN_POINT('',(-5.83,-2.125,1.E-01));+#4089=LINE('',#4083,#658);+#4090=ORIENTED_EDGE('',*,*,#4091,.T.);+#4091=EDGE_CURVE('',#4087,#4092,#4094,.T.);+#4092=VERTEX_POINT('',#4093);+#4093=CARTESIAN_POINT('',(-5.568163490354,-2.125,0.1));+#4094=LINE('',#4088,#622);+#4095=ORIENTED_EDGE('',*,*,#4096,.T.);+#4096=EDGE_CURVE('',#4092,#4097,#4099,.T.);+#4097=VERTEX_POINT('',#4098);+#4098=CARTESIAN_POINT('',(-5.469682715053,-2.125,0.182635182233));+#4099=CIRCLE('',#4100,0.1);+#4100=AXIS2_PLACEMENT_3D('',#4079,#2975,#2976);+#4101=ORIENTED_EDGE('',*,*,#4102,.T.);+#4102=EDGE_CURVE('',#4097,#4103,#4105,.T.);+#4103=VERTEX_POINT('',#4104);+#4104=CARTESIAN_POINT('',(-5.376961550602,-2.125,0.734729635533));+#4105=LINE('',#4098,#2982);+#4106=ORIENTED_EDGE('',*,*,#4107,.T.);+#4107=EDGE_CURVE('',#4103,#4108,#4109,.T.);+#4108=VERTEX_POINT('',#4052);+#4109=CIRCLE('',#4110,0.2);+#4110=AXIS2_PLACEMENT_3D('',#4067,#2989,#2990);+#4111=ORIENTED_EDGE('',*,*,#4112,.T.);+#4112=EDGE_CURVE('',#4108,#973,#4051,.T.);+#4113=PLANE('',#4114);+#4114=AXIS2_PLACEMENT_3D('',#4115,#685,#13);+#4115=CARTESIAN_POINT('',(-5.377811491544,-2.125,0.447016202907));+#4116=ADVANCED_FACE('',(#4117),#4131,.F.);+#4117=FACE_BOUND('',#4118,.F.);+#4118=EDGE_LOOP('',(#4119,#4120,#4127,#4130));+#4119=ORIENTED_EDGE('',*,*,#996,.T.);+#4120=ORIENTED_EDGE('',*,*,#4121,.T.);+#4121=EDGE_CURVE('',#991,#4122,#4124,.T.);+#4122=VERTEX_POINT('',#4123);+#4123=CARTESIAN_POINT('',(-5.278480775301,-1.875,0.717364817767));+#4124=CIRCLE('',#4125,1.E-01);+#4125=AXIS2_PLACEMENT_3D('',#4126,#2936,#2937);+#4126=CARTESIAN_POINT('',(-5.18,-1.875,0.7));+#4127=ORIENTED_EDGE('',*,*,#4128,.F.);+#4128=EDGE_CURVE('',#4063,#4122,#4129,.T.);+#4129=LINE('',#4064,#684);+#4130=ORIENTED_EDGE('',*,*,#4062,.F.);+#4131=CYLINDRICAL_SURFACE('',#4066,1.E-01);+#4132=ADVANCED_FACE('',(#4133),#4182,.T.);+#4133=FACE_BOUND('',#4134,.T.);+#4134=EDGE_LOOP('',(#1003,#989,#4120,#4135,#4140,#4147,#4152,#4157,#4162,#4168,#4173,#4179));+#4135=ORIENTED_EDGE('',*,*,#4136,.T.);+#4136=EDGE_CURVE('',#4122,#4137,#4139,.T.);+#4137=VERTEX_POINT('',#4138);+#4138=CARTESIAN_POINT('',(-5.371201939752,-1.875,0.165270364467));+#4139=LINE('',#4123,#2943);+#4140=ORIENTED_EDGE('',*,*,#4141,.T.);+#4141=EDGE_CURVE('',#4137,#4142,#4144,.T.);+#4142=VERTEX_POINT('',#4143);+#4143=CARTESIAN_POINT('',(-5.568163490354,-1.875,-1.387778780781E-16));+#4144=CIRCLE('',#4145,0.2);+#4145=AXIS2_PLACEMENT_3D('',#4146,#2952,#2953);+#4146=CARTESIAN_POINT('',(-5.568163490354,-1.875,0.2));+#4147=ORIENTED_EDGE('',*,*,#4148,.T.);+#4148=EDGE_CURVE('',#4142,#4149,#4151,.T.);+#4149=VERTEX_POINT('',#4150);+#4150=CARTESIAN_POINT('',(-5.83,-1.875,-1.387778780781E-16));+#4151=LINE('',#4143,#672);+#4152=ORIENTED_EDGE('',*,*,#4153,.T.);+#4153=EDGE_CURVE('',#4149,#4154,#4156,.T.);+#4154=VERTEX_POINT('',#4155);+#4155=CARTESIAN_POINT('',(-5.83,-1.875,1.E-01));+#4156=LINE('',#4150,#658);+#4157=ORIENTED_EDGE('',*,*,#4158,.T.);+#4158=EDGE_CURVE('',#4154,#4159,#4161,.T.);+#4159=VERTEX_POINT('',#4160);+#4160=CARTESIAN_POINT('',(-5.568163490354,-1.875,0.1));+#4161=LINE('',#4155,#622);+#4162=ORIENTED_EDGE('',*,*,#4163,.T.);+#4163=EDGE_CURVE('',#4159,#4164,#4166,.T.);+#4164=VERTEX_POINT('',#4165);+#4165=CARTESIAN_POINT('',(-5.469682715053,-1.875,0.182635182233));+#4166=CIRCLE('',#4167,0.1);+#4167=AXIS2_PLACEMENT_3D('',#4146,#2975,#2976);+#4168=ORIENTED_EDGE('',*,*,#4169,.T.);+#4169=EDGE_CURVE('',#4164,#4170,#4172,.T.);+#4170=VERTEX_POINT('',#4171);+#4171=CARTESIAN_POINT('',(-5.376961550602,-1.875,0.734729635533));+#4172=LINE('',#4165,#2982);+#4173=ORIENTED_EDGE('',*,*,#4174,.T.);+#4174=EDGE_CURVE('',#4170,#4175,#4177,.T.);+#4175=VERTEX_POINT('',#4176);+#4176=CARTESIAN_POINT('',(-5.18,-1.875,0.9));+#4177=CIRCLE('',#4178,0.2);+#4178=AXIS2_PLACEMENT_3D('',#4126,#2989,#2990);+#4179=ORIENTED_EDGE('',*,*,#4180,.T.);+#4180=EDGE_CURVE('',#4175,#1005,#4181,.T.);+#4181=LINE('',#4176,#622);+#4182=PLANE('',#4183);+#4183=AXIS2_PLACEMENT_3D('',#4184,#685,#13);+#4184=CARTESIAN_POINT('',(-5.377811491544,-1.875,0.447016202907));+#4185=ADVANCED_FACE('',(#4186),#628,.F.);+#4186=FACE_BOUND('',#4187,.F.);+#4187=EDGE_LOOP('',(#4188,#4189,#4193,#4194));+#4188=ORIENTED_EDGE('',*,*,#1017,.T.);+#4189=ORIENTED_EDGE('',*,*,#4190,.T.);+#4190=EDGE_CURVE('',#1012,#2529,#4191,.T.);+#4191=LINE('',#4192,#622);+#4192=CARTESIAN_POINT('',(-5.18,-1.325,0.9));+#4193=ORIENTED_EDGE('',*,*,#2528,.F.);+#4194=ORIENTED_EDGE('',*,*,#4195,.F.);+#4195=EDGE_CURVE('',#1005,#2525,#4181,.T.);+#4196=ADVANCED_FACE('',(#4197),#4253,.F.);+#4197=FACE_BOUND('',#4198,.F.);+#4198=EDGE_LOOP('',(#4199,#4200,#4201,#4208,#4213,#4220,#4225,#4230,#4235,#4241,#4246,#4251));+#4199=ORIENTED_EDGE('',*,*,#1011,.F.);+#4200=ORIENTED_EDGE('',*,*,#1022,.T.);+#4201=ORIENTED_EDGE('',*,*,#4202,.T.);+#4202=EDGE_CURVE('',#1023,#4203,#4205,.T.);+#4203=VERTEX_POINT('',#4204);+#4204=CARTESIAN_POINT('',(-5.278480775301,-1.325,0.717364817767));+#4205=CIRCLE('',#4206,1.E-01);+#4206=AXIS2_PLACEMENT_3D('',#4207,#2936,#2937);+#4207=CARTESIAN_POINT('',(-5.18,-1.325,0.7));+#4208=ORIENTED_EDGE('',*,*,#4209,.T.);+#4209=EDGE_CURVE('',#4203,#4210,#4212,.T.);+#4210=VERTEX_POINT('',#4211);+#4211=CARTESIAN_POINT('',(-5.371201939752,-1.325,0.165270364467));+#4212=LINE('',#4204,#2943);+#4213=ORIENTED_EDGE('',*,*,#4214,.T.);+#4214=EDGE_CURVE('',#4210,#4215,#4217,.T.);+#4215=VERTEX_POINT('',#4216);+#4216=CARTESIAN_POINT('',(-5.568163490354,-1.325,-1.387778780781E-16));+#4217=CIRCLE('',#4218,0.2);+#4218=AXIS2_PLACEMENT_3D('',#4219,#2952,#2953);+#4219=CARTESIAN_POINT('',(-5.568163490354,-1.325,0.2));+#4220=ORIENTED_EDGE('',*,*,#4221,.T.);+#4221=EDGE_CURVE('',#4215,#4222,#4224,.T.);+#4222=VERTEX_POINT('',#4223);+#4223=CARTESIAN_POINT('',(-5.83,-1.325,-1.387778780781E-16));+#4224=LINE('',#4216,#672);+#4225=ORIENTED_EDGE('',*,*,#4226,.T.);+#4226=EDGE_CURVE('',#4222,#4227,#4229,.T.);+#4227=VERTEX_POINT('',#4228);+#4228=CARTESIAN_POINT('',(-5.83,-1.325,1.E-01));+#4229=LINE('',#4223,#658);+#4230=ORIENTED_EDGE('',*,*,#4231,.T.);+#4231=EDGE_CURVE('',#4227,#4232,#4234,.T.);+#4232=VERTEX_POINT('',#4233);+#4233=CARTESIAN_POINT('',(-5.568163490354,-1.325,0.1));+#4234=LINE('',#4228,#622);+#4235=ORIENTED_EDGE('',*,*,#4236,.T.);+#4236=EDGE_CURVE('',#4232,#4237,#4239,.T.);+#4237=VERTEX_POINT('',#4238);+#4238=CARTESIAN_POINT('',(-5.469682715053,-1.325,0.182635182233));+#4239=CIRCLE('',#4240,0.1);+#4240=AXIS2_PLACEMENT_3D('',#4219,#2975,#2976);+#4241=ORIENTED_EDGE('',*,*,#4242,.T.);+#4242=EDGE_CURVE('',#4237,#4243,#4245,.T.);+#4243=VERTEX_POINT('',#4244);+#4244=CARTESIAN_POINT('',(-5.376961550602,-1.325,0.734729635533));+#4245=LINE('',#4238,#2982);+#4246=ORIENTED_EDGE('',*,*,#4247,.T.);+#4247=EDGE_CURVE('',#4243,#4248,#4249,.T.);+#4248=VERTEX_POINT('',#4192);+#4249=CIRCLE('',#4250,0.2);+#4250=AXIS2_PLACEMENT_3D('',#4207,#2989,#2990);+#4251=ORIENTED_EDGE('',*,*,#4252,.T.);+#4252=EDGE_CURVE('',#4248,#1012,#4191,.T.);+#4253=PLANE('',#4254);+#4254=AXIS2_PLACEMENT_3D('',#4255,#685,#13);+#4255=CARTESIAN_POINT('',(-5.377811491544,-1.325,0.447016202907));+#4256=ADVANCED_FACE('',(#4257),#4271,.F.);+#4257=FACE_BOUND('',#4258,.F.);+#4258=EDGE_LOOP('',(#4259,#4260,#4267,#4270));+#4259=ORIENTED_EDGE('',*,*,#1035,.T.);+#4260=ORIENTED_EDGE('',*,*,#4261,.T.);+#4261=EDGE_CURVE('',#1030,#4262,#4264,.T.);+#4262=VERTEX_POINT('',#4263);+#4263=CARTESIAN_POINT('',(-5.278480775301,-1.075,0.717364817767));+#4264=CIRCLE('',#4265,1.E-01);+#4265=AXIS2_PLACEMENT_3D('',#4266,#2936,#2937);+#4266=CARTESIAN_POINT('',(-5.18,-1.075,0.7));+#4267=ORIENTED_EDGE('',*,*,#4268,.F.);+#4268=EDGE_CURVE('',#4203,#4262,#4269,.T.);+#4269=LINE('',#4204,#684);+#4270=ORIENTED_EDGE('',*,*,#4202,.F.);+#4271=CYLINDRICAL_SURFACE('',#4206,1.E-01);+#4272=ADVANCED_FACE('',(#4273),#4322,.T.);+#4273=FACE_BOUND('',#4274,.T.);+#4274=EDGE_LOOP('',(#1042,#1028,#4260,#4275,#4280,#4287,#4292,#4297,#4302,#4308,#4313,#4319));+#4275=ORIENTED_EDGE('',*,*,#4276,.T.);+#4276=EDGE_CURVE('',#4262,#4277,#4279,.T.);+#4277=VERTEX_POINT('',#4278);+#4278=CARTESIAN_POINT('',(-5.371201939752,-1.075,0.165270364467));+#4279=LINE('',#4263,#2943);+#4280=ORIENTED_EDGE('',*,*,#4281,.T.);+#4281=EDGE_CURVE('',#4277,#4282,#4284,.T.);+#4282=VERTEX_POINT('',#4283);+#4283=CARTESIAN_POINT('',(-5.568163490354,-1.075,-1.387778780781E-16));+#4284=CIRCLE('',#4285,0.2);+#4285=AXIS2_PLACEMENT_3D('',#4286,#2952,#2953);+#4286=CARTESIAN_POINT('',(-5.568163490354,-1.075,0.2));+#4287=ORIENTED_EDGE('',*,*,#4288,.T.);+#4288=EDGE_CURVE('',#4282,#4289,#4291,.T.);+#4289=VERTEX_POINT('',#4290);+#4290=CARTESIAN_POINT('',(-5.83,-1.075,-1.387778780781E-16));+#4291=LINE('',#4283,#672);+#4292=ORIENTED_EDGE('',*,*,#4293,.T.);+#4293=EDGE_CURVE('',#4289,#4294,#4296,.T.);+#4294=VERTEX_POINT('',#4295);+#4295=CARTESIAN_POINT('',(-5.83,-1.075,1.E-01));+#4296=LINE('',#4290,#658);+#4297=ORIENTED_EDGE('',*,*,#4298,.T.);+#4298=EDGE_CURVE('',#4294,#4299,#4301,.T.);+#4299=VERTEX_POINT('',#4300);+#4300=CARTESIAN_POINT('',(-5.568163490354,-1.075,0.1));+#4301=LINE('',#4295,#622);+#4302=ORIENTED_EDGE('',*,*,#4303,.T.);+#4303=EDGE_CURVE('',#4299,#4304,#4306,.T.);+#4304=VERTEX_POINT('',#4305);+#4305=CARTESIAN_POINT('',(-5.469682715053,-1.075,0.182635182233));+#4306=CIRCLE('',#4307,0.1);+#4307=AXIS2_PLACEMENT_3D('',#4286,#2975,#2976);+#4308=ORIENTED_EDGE('',*,*,#4309,.T.);+#4309=EDGE_CURVE('',#4304,#4310,#4312,.T.);+#4310=VERTEX_POINT('',#4311);+#4311=CARTESIAN_POINT('',(-5.376961550602,-1.075,0.734729635533));+#4312=LINE('',#4305,#2982);+#4313=ORIENTED_EDGE('',*,*,#4314,.T.);+#4314=EDGE_CURVE('',#4310,#4315,#4317,.T.);+#4315=VERTEX_POINT('',#4316);+#4316=CARTESIAN_POINT('',(-5.18,-1.075,0.9));+#4317=CIRCLE('',#4318,0.2);+#4318=AXIS2_PLACEMENT_3D('',#4266,#2989,#2990);+#4319=ORIENTED_EDGE('',*,*,#4320,.T.);+#4320=EDGE_CURVE('',#4315,#1044,#4321,.T.);+#4321=LINE('',#4316,#622);+#4322=PLANE('',#4323);+#4323=AXIS2_PLACEMENT_3D('',#4324,#685,#13);+#4324=CARTESIAN_POINT('',(-5.377811491544,-1.075,0.447016202907));+#4325=ADVANCED_FACE('',(#4326),#628,.F.);+#4326=FACE_BOUND('',#4327,.F.);+#4327=EDGE_LOOP('',(#4328,#4329,#4333,#4334));+#4328=ORIENTED_EDGE('',*,*,#1056,.T.);+#4329=ORIENTED_EDGE('',*,*,#4330,.T.);+#4330=EDGE_CURVE('',#1051,#2537,#4331,.T.);+#4331=LINE('',#4332,#622);+#4332=CARTESIAN_POINT('',(-5.18,-0.525,0.9));+#4333=ORIENTED_EDGE('',*,*,#2536,.F.);+#4334=ORIENTED_EDGE('',*,*,#4335,.F.);+#4335=EDGE_CURVE('',#1044,#2533,#4321,.T.);+#4336=ADVANCED_FACE('',(#4337),#4393,.F.);+#4337=FACE_BOUND('',#4338,.F.);+#4338=EDGE_LOOP('',(#4339,#4340,#4341,#4348,#4353,#4360,#4365,#4370,#4375,#4381,#4386,#4391));+#4339=ORIENTED_EDGE('',*,*,#1050,.F.);+#4340=ORIENTED_EDGE('',*,*,#1061,.T.);+#4341=ORIENTED_EDGE('',*,*,#4342,.T.);+#4342=EDGE_CURVE('',#1062,#4343,#4345,.T.);+#4343=VERTEX_POINT('',#4344);+#4344=CARTESIAN_POINT('',(-5.278480775301,-0.525,0.717364817767));+#4345=CIRCLE('',#4346,1.E-01);+#4346=AXIS2_PLACEMENT_3D('',#4347,#2936,#2937);+#4347=CARTESIAN_POINT('',(-5.18,-0.525,0.7));+#4348=ORIENTED_EDGE('',*,*,#4349,.T.);+#4349=EDGE_CURVE('',#4343,#4350,#4352,.T.);+#4350=VERTEX_POINT('',#4351);+#4351=CARTESIAN_POINT('',(-5.371201939752,-0.525,0.165270364467));+#4352=LINE('',#4344,#2943);+#4353=ORIENTED_EDGE('',*,*,#4354,.T.);+#4354=EDGE_CURVE('',#4350,#4355,#4357,.T.);+#4355=VERTEX_POINT('',#4356);+#4356=CARTESIAN_POINT('',(-5.568163490354,-0.525,-1.387778780781E-16));+#4357=CIRCLE('',#4358,0.2);+#4358=AXIS2_PLACEMENT_3D('',#4359,#2952,#2953);+#4359=CARTESIAN_POINT('',(-5.568163490354,-0.525,0.2));+#4360=ORIENTED_EDGE('',*,*,#4361,.T.);+#4361=EDGE_CURVE('',#4355,#4362,#4364,.T.);+#4362=VERTEX_POINT('',#4363);+#4363=CARTESIAN_POINT('',(-5.83,-0.525,-1.387778780781E-16));+#4364=LINE('',#4356,#672);+#4365=ORIENTED_EDGE('',*,*,#4366,.T.);+#4366=EDGE_CURVE('',#4362,#4367,#4369,.T.);+#4367=VERTEX_POINT('',#4368);+#4368=CARTESIAN_POINT('',(-5.83,-0.525,1.E-01));+#4369=LINE('',#4363,#658);+#4370=ORIENTED_EDGE('',*,*,#4371,.T.);+#4371=EDGE_CURVE('',#4367,#4372,#4374,.T.);+#4372=VERTEX_POINT('',#4373);+#4373=CARTESIAN_POINT('',(-5.568163490354,-0.525,0.1));+#4374=LINE('',#4368,#622);+#4375=ORIENTED_EDGE('',*,*,#4376,.T.);+#4376=EDGE_CURVE('',#4372,#4377,#4379,.T.);+#4377=VERTEX_POINT('',#4378);+#4378=CARTESIAN_POINT('',(-5.469682715053,-0.525,0.182635182233));+#4379=CIRCLE('',#4380,0.1);+#4380=AXIS2_PLACEMENT_3D('',#4359,#2975,#2976);+#4381=ORIENTED_EDGE('',*,*,#4382,.T.);+#4382=EDGE_CURVE('',#4377,#4383,#4385,.T.);+#4383=VERTEX_POINT('',#4384);+#4384=CARTESIAN_POINT('',(-5.376961550602,-0.525,0.734729635533));+#4385=LINE('',#4378,#2982);+#4386=ORIENTED_EDGE('',*,*,#4387,.T.);+#4387=EDGE_CURVE('',#4383,#4388,#4389,.T.);+#4388=VERTEX_POINT('',#4332);+#4389=CIRCLE('',#4390,0.2);+#4390=AXIS2_PLACEMENT_3D('',#4347,#2989,#2990);+#4391=ORIENTED_EDGE('',*,*,#4392,.T.);+#4392=EDGE_CURVE('',#4388,#1051,#4331,.T.);+#4393=PLANE('',#4394);+#4394=AXIS2_PLACEMENT_3D('',#4395,#685,#13);+#4395=CARTESIAN_POINT('',(-5.377811491544,-0.525,0.447016202907));+#4396=ADVANCED_FACE('',(#4397),#4411,.F.);+#4397=FACE_BOUND('',#4398,.F.);+#4398=EDGE_LOOP('',(#4399,#4400,#4407,#4410));+#4399=ORIENTED_EDGE('',*,*,#1074,.T.);+#4400=ORIENTED_EDGE('',*,*,#4401,.T.);+#4401=EDGE_CURVE('',#1069,#4402,#4404,.T.);+#4402=VERTEX_POINT('',#4403);+#4403=CARTESIAN_POINT('',(-5.278480775301,-0.275,0.717364817767));+#4404=CIRCLE('',#4405,1.E-01);+#4405=AXIS2_PLACEMENT_3D('',#4406,#2936,#2937);+#4406=CARTESIAN_POINT('',(-5.18,-0.275,0.7));+#4407=ORIENTED_EDGE('',*,*,#4408,.F.);+#4408=EDGE_CURVE('',#4343,#4402,#4409,.T.);+#4409=LINE('',#4344,#684);+#4410=ORIENTED_EDGE('',*,*,#4342,.F.);+#4411=CYLINDRICAL_SURFACE('',#4346,1.E-01);+#4412=ADVANCED_FACE('',(#4413),#4462,.T.);+#4413=FACE_BOUND('',#4414,.T.);+#4414=EDGE_LOOP('',(#1081,#1067,#4400,#4415,#4420,#4427,#4432,#4437,#4442,#4448,#4453,#4459));+#4415=ORIENTED_EDGE('',*,*,#4416,.T.);+#4416=EDGE_CURVE('',#4402,#4417,#4419,.T.);+#4417=VERTEX_POINT('',#4418);+#4418=CARTESIAN_POINT('',(-5.371201939752,-0.275,0.165270364467));+#4419=LINE('',#4403,#2943);+#4420=ORIENTED_EDGE('',*,*,#4421,.T.);+#4421=EDGE_CURVE('',#4417,#4422,#4424,.T.);+#4422=VERTEX_POINT('',#4423);+#4423=CARTESIAN_POINT('',(-5.568163490354,-0.275,-1.387778780781E-16));+#4424=CIRCLE('',#4425,0.2);+#4425=AXIS2_PLACEMENT_3D('',#4426,#2952,#2953);+#4426=CARTESIAN_POINT('',(-5.568163490354,-0.275,0.2));+#4427=ORIENTED_EDGE('',*,*,#4428,.T.);+#4428=EDGE_CURVE('',#4422,#4429,#4431,.T.);+#4429=VERTEX_POINT('',#4430);+#4430=CARTESIAN_POINT('',(-5.83,-0.275,-1.387778780781E-16));+#4431=LINE('',#4423,#672);+#4432=ORIENTED_EDGE('',*,*,#4433,.T.);+#4433=EDGE_CURVE('',#4429,#4434,#4436,.T.);+#4434=VERTEX_POINT('',#4435);+#4435=CARTESIAN_POINT('',(-5.83,-0.275,1.E-01));+#4436=LINE('',#4430,#658);+#4437=ORIENTED_EDGE('',*,*,#4438,.T.);+#4438=EDGE_CURVE('',#4434,#4439,#4441,.T.);+#4439=VERTEX_POINT('',#4440);+#4440=CARTESIAN_POINT('',(-5.568163490354,-0.275,0.1));+#4441=LINE('',#4435,#622);+#4442=ORIENTED_EDGE('',*,*,#4443,.T.);+#4443=EDGE_CURVE('',#4439,#4444,#4446,.T.);+#4444=VERTEX_POINT('',#4445);+#4445=CARTESIAN_POINT('',(-5.469682715053,-0.275,0.182635182233));+#4446=CIRCLE('',#4447,0.1);+#4447=AXIS2_PLACEMENT_3D('',#4426,#2975,#2976);+#4448=ORIENTED_EDGE('',*,*,#4449,.T.);+#4449=EDGE_CURVE('',#4444,#4450,#4452,.T.);+#4450=VERTEX_POINT('',#4451);+#4451=CARTESIAN_POINT('',(-5.376961550602,-0.275,0.734729635533));+#4452=LINE('',#4445,#2982);+#4453=ORIENTED_EDGE('',*,*,#4454,.T.);+#4454=EDGE_CURVE('',#4450,#4455,#4457,.T.);+#4455=VERTEX_POINT('',#4456);+#4456=CARTESIAN_POINT('',(-5.18,-0.275,0.9));+#4457=CIRCLE('',#4458,0.2);+#4458=AXIS2_PLACEMENT_3D('',#4406,#2989,#2990);+#4459=ORIENTED_EDGE('',*,*,#4460,.T.);+#4460=EDGE_CURVE('',#4455,#1083,#4461,.T.);+#4461=LINE('',#4456,#622);+#4462=PLANE('',#4463);+#4463=AXIS2_PLACEMENT_3D('',#4464,#685,#13);+#4464=CARTESIAN_POINT('',(-5.377811491544,-0.275,0.447016202907));+#4465=ADVANCED_FACE('',(#4466),#628,.F.);+#4466=FACE_BOUND('',#4467,.F.);+#4467=EDGE_LOOP('',(#4468,#4469,#4473,#4474));+#4468=ORIENTED_EDGE('',*,*,#1095,.T.);+#4469=ORIENTED_EDGE('',*,*,#4470,.T.);+#4470=EDGE_CURVE('',#1090,#2545,#4471,.T.);+#4471=LINE('',#4472,#622);+#4472=CARTESIAN_POINT('',(-5.18,0.275,0.9));+#4473=ORIENTED_EDGE('',*,*,#2544,.F.);+#4474=ORIENTED_EDGE('',*,*,#4475,.F.);+#4475=EDGE_CURVE('',#1083,#2541,#4461,.T.);+#4476=ADVANCED_FACE('',(#4477),#4533,.F.);+#4477=FACE_BOUND('',#4478,.F.);+#4478=EDGE_LOOP('',(#4479,#4480,#4481,#4488,#4493,#4500,#4505,#4510,#4515,#4521,#4526,#4531));+#4479=ORIENTED_EDGE('',*,*,#1089,.F.);+#4480=ORIENTED_EDGE('',*,*,#1100,.T.);+#4481=ORIENTED_EDGE('',*,*,#4482,.T.);+#4482=EDGE_CURVE('',#1101,#4483,#4485,.T.);+#4483=VERTEX_POINT('',#4484);+#4484=CARTESIAN_POINT('',(-5.278480775301,0.275,0.717364817767));+#4485=CIRCLE('',#4486,1.E-01);+#4486=AXIS2_PLACEMENT_3D('',#4487,#2936,#2937);+#4487=CARTESIAN_POINT('',(-5.18,0.275,0.7));+#4488=ORIENTED_EDGE('',*,*,#4489,.T.);+#4489=EDGE_CURVE('',#4483,#4490,#4492,.T.);+#4490=VERTEX_POINT('',#4491);+#4491=CARTESIAN_POINT('',(-5.371201939752,0.275,0.165270364467));+#4492=LINE('',#4484,#2943);+#4493=ORIENTED_EDGE('',*,*,#4494,.T.);+#4494=EDGE_CURVE('',#4490,#4495,#4497,.T.);+#4495=VERTEX_POINT('',#4496);+#4496=CARTESIAN_POINT('',(-5.568163490354,0.275,-1.387778780781E-16));+#4497=CIRCLE('',#4498,0.2);+#4498=AXIS2_PLACEMENT_3D('',#4499,#2952,#2953);+#4499=CARTESIAN_POINT('',(-5.568163490354,0.275,0.2));+#4500=ORIENTED_EDGE('',*,*,#4501,.T.);+#4501=EDGE_CURVE('',#4495,#4502,#4504,.T.);+#4502=VERTEX_POINT('',#4503);+#4503=CARTESIAN_POINT('',(-5.83,0.275,-1.387778780781E-16));+#4504=LINE('',#4496,#672);+#4505=ORIENTED_EDGE('',*,*,#4506,.T.);+#4506=EDGE_CURVE('',#4502,#4507,#4509,.T.);+#4507=VERTEX_POINT('',#4508);+#4508=CARTESIAN_POINT('',(-5.83,0.275,1.E-01));+#4509=LINE('',#4503,#658);+#4510=ORIENTED_EDGE('',*,*,#4511,.T.);+#4511=EDGE_CURVE('',#4507,#4512,#4514,.T.);+#4512=VERTEX_POINT('',#4513);+#4513=CARTESIAN_POINT('',(-5.568163490354,0.275,0.1));+#4514=LINE('',#4508,#622);+#4515=ORIENTED_EDGE('',*,*,#4516,.T.);+#4516=EDGE_CURVE('',#4512,#4517,#4519,.T.);+#4517=VERTEX_POINT('',#4518);+#4518=CARTESIAN_POINT('',(-5.469682715053,0.275,0.182635182233));+#4519=CIRCLE('',#4520,0.1);+#4520=AXIS2_PLACEMENT_3D('',#4499,#2975,#2976);+#4521=ORIENTED_EDGE('',*,*,#4522,.T.);+#4522=EDGE_CURVE('',#4517,#4523,#4525,.T.);+#4523=VERTEX_POINT('',#4524);+#4524=CARTESIAN_POINT('',(-5.376961550602,0.275,0.734729635533));+#4525=LINE('',#4518,#2982);+#4526=ORIENTED_EDGE('',*,*,#4527,.T.);+#4527=EDGE_CURVE('',#4523,#4528,#4529,.T.);+#4528=VERTEX_POINT('',#4472);+#4529=CIRCLE('',#4530,0.2);+#4530=AXIS2_PLACEMENT_3D('',#4487,#2989,#2990);+#4531=ORIENTED_EDGE('',*,*,#4532,.T.);+#4532=EDGE_CURVE('',#4528,#1090,#4471,.T.);+#4533=PLANE('',#4534);+#4534=AXIS2_PLACEMENT_3D('',#4535,#685,#13);+#4535=CARTESIAN_POINT('',(-5.377811491544,0.275,0.447016202907));+#4536=ADVANCED_FACE('',(#4537),#4551,.F.);+#4537=FACE_BOUND('',#4538,.F.);+#4538=EDGE_LOOP('',(#4539,#4540,#4547,#4550));+#4539=ORIENTED_EDGE('',*,*,#1113,.T.);+#4540=ORIENTED_EDGE('',*,*,#4541,.T.);+#4541=EDGE_CURVE('',#1108,#4542,#4544,.T.);+#4542=VERTEX_POINT('',#4543);+#4543=CARTESIAN_POINT('',(-5.278480775301,0.525,0.717364817767));+#4544=CIRCLE('',#4545,1.E-01);+#4545=AXIS2_PLACEMENT_3D('',#4546,#2936,#2937);+#4546=CARTESIAN_POINT('',(-5.18,0.525,0.7));+#4547=ORIENTED_EDGE('',*,*,#4548,.F.);+#4548=EDGE_CURVE('',#4483,#4542,#4549,.T.);+#4549=LINE('',#4484,#684);+#4550=ORIENTED_EDGE('',*,*,#4482,.F.);+#4551=CYLINDRICAL_SURFACE('',#4486,1.E-01);+#4552=ADVANCED_FACE('',(#4553),#4602,.T.);+#4553=FACE_BOUND('',#4554,.T.);+#4554=EDGE_LOOP('',(#1120,#1106,#4540,#4555,#4560,#4567,#4572,#4577,#4582,#4588,#4593,#4599));+#4555=ORIENTED_EDGE('',*,*,#4556,.T.);+#4556=EDGE_CURVE('',#4542,#4557,#4559,.T.);+#4557=VERTEX_POINT('',#4558);+#4558=CARTESIAN_POINT('',(-5.371201939752,0.525,0.165270364467));+#4559=LINE('',#4543,#2943);+#4560=ORIENTED_EDGE('',*,*,#4561,.T.);+#4561=EDGE_CURVE('',#4557,#4562,#4564,.T.);+#4562=VERTEX_POINT('',#4563);+#4563=CARTESIAN_POINT('',(-5.568163490354,0.525,-1.387778780781E-16));+#4564=CIRCLE('',#4565,0.2);+#4565=AXIS2_PLACEMENT_3D('',#4566,#2952,#2953);+#4566=CARTESIAN_POINT('',(-5.568163490354,0.525,0.2));+#4567=ORIENTED_EDGE('',*,*,#4568,.T.);+#4568=EDGE_CURVE('',#4562,#4569,#4571,.T.);+#4569=VERTEX_POINT('',#4570);+#4570=CARTESIAN_POINT('',(-5.83,0.525,-1.387778780781E-16));+#4571=LINE('',#4563,#672);+#4572=ORIENTED_EDGE('',*,*,#4573,.T.);+#4573=EDGE_CURVE('',#4569,#4574,#4576,.T.);+#4574=VERTEX_POINT('',#4575);+#4575=CARTESIAN_POINT('',(-5.83,0.525,1.E-01));+#4576=LINE('',#4570,#658);+#4577=ORIENTED_EDGE('',*,*,#4578,.T.);+#4578=EDGE_CURVE('',#4574,#4579,#4581,.T.);+#4579=VERTEX_POINT('',#4580);+#4580=CARTESIAN_POINT('',(-5.568163490354,0.525,0.1));+#4581=LINE('',#4575,#622);+#4582=ORIENTED_EDGE('',*,*,#4583,.T.);+#4583=EDGE_CURVE('',#4579,#4584,#4586,.T.);+#4584=VERTEX_POINT('',#4585);+#4585=CARTESIAN_POINT('',(-5.469682715053,0.525,0.182635182233));+#4586=CIRCLE('',#4587,0.1);+#4587=AXIS2_PLACEMENT_3D('',#4566,#2975,#2976);+#4588=ORIENTED_EDGE('',*,*,#4589,.T.);+#4589=EDGE_CURVE('',#4584,#4590,#4592,.T.);+#4590=VERTEX_POINT('',#4591);+#4591=CARTESIAN_POINT('',(-5.376961550602,0.525,0.734729635533));+#4592=LINE('',#4585,#2982);+#4593=ORIENTED_EDGE('',*,*,#4594,.T.);+#4594=EDGE_CURVE('',#4590,#4595,#4597,.T.);+#4595=VERTEX_POINT('',#4596);+#4596=CARTESIAN_POINT('',(-5.18,0.525,0.9));+#4597=CIRCLE('',#4598,0.2);+#4598=AXIS2_PLACEMENT_3D('',#4546,#2989,#2990);+#4599=ORIENTED_EDGE('',*,*,#4600,.T.);+#4600=EDGE_CURVE('',#4595,#1122,#4601,.T.);+#4601=LINE('',#4596,#622);+#4602=PLANE('',#4603);+#4603=AXIS2_PLACEMENT_3D('',#4604,#685,#13);+#4604=CARTESIAN_POINT('',(-5.377811491544,0.525,0.447016202907));+#4605=ADVANCED_FACE('',(#4606),#628,.F.);+#4606=FACE_BOUND('',#4607,.F.);+#4607=EDGE_LOOP('',(#4608,#4609,#4613,#4614));+#4608=ORIENTED_EDGE('',*,*,#1134,.T.);+#4609=ORIENTED_EDGE('',*,*,#4610,.T.);+#4610=EDGE_CURVE('',#1129,#2553,#4611,.T.);+#4611=LINE('',#4612,#622);+#4612=CARTESIAN_POINT('',(-5.18,1.075,0.9));+#4613=ORIENTED_EDGE('',*,*,#2552,.F.);+#4614=ORIENTED_EDGE('',*,*,#4615,.F.);+#4615=EDGE_CURVE('',#1122,#2549,#4601,.T.);+#4616=ADVANCED_FACE('',(#4617),#4673,.F.);+#4617=FACE_BOUND('',#4618,.F.);+#4618=EDGE_LOOP('',(#4619,#4620,#4621,#4628,#4633,#4640,#4645,#4650,#4655,#4661,#4666,#4671));+#4619=ORIENTED_EDGE('',*,*,#1128,.F.);+#4620=ORIENTED_EDGE('',*,*,#1139,.T.);+#4621=ORIENTED_EDGE('',*,*,#4622,.T.);+#4622=EDGE_CURVE('',#1140,#4623,#4625,.T.);+#4623=VERTEX_POINT('',#4624);+#4624=CARTESIAN_POINT('',(-5.278480775301,1.075,0.717364817767));+#4625=CIRCLE('',#4626,1.E-01);+#4626=AXIS2_PLACEMENT_3D('',#4627,#2936,#2937);+#4627=CARTESIAN_POINT('',(-5.18,1.075,0.7));+#4628=ORIENTED_EDGE('',*,*,#4629,.T.);+#4629=EDGE_CURVE('',#4623,#4630,#4632,.T.);+#4630=VERTEX_POINT('',#4631);+#4631=CARTESIAN_POINT('',(-5.371201939752,1.075,0.165270364467));+#4632=LINE('',#4624,#2943);+#4633=ORIENTED_EDGE('',*,*,#4634,.T.);+#4634=EDGE_CURVE('',#4630,#4635,#4637,.T.);+#4635=VERTEX_POINT('',#4636);+#4636=CARTESIAN_POINT('',(-5.568163490354,1.075,-1.387778780781E-16));+#4637=CIRCLE('',#4638,0.2);+#4638=AXIS2_PLACEMENT_3D('',#4639,#2952,#2953);+#4639=CARTESIAN_POINT('',(-5.568163490354,1.075,0.2));+#4640=ORIENTED_EDGE('',*,*,#4641,.T.);+#4641=EDGE_CURVE('',#4635,#4642,#4644,.T.);+#4642=VERTEX_POINT('',#4643);+#4643=CARTESIAN_POINT('',(-5.83,1.075,-1.387778780781E-16));+#4644=LINE('',#4636,#672);+#4645=ORIENTED_EDGE('',*,*,#4646,.T.);+#4646=EDGE_CURVE('',#4642,#4647,#4649,.T.);+#4647=VERTEX_POINT('',#4648);+#4648=CARTESIAN_POINT('',(-5.83,1.075,1.E-01));+#4649=LINE('',#4643,#658);+#4650=ORIENTED_EDGE('',*,*,#4651,.T.);+#4651=EDGE_CURVE('',#4647,#4652,#4654,.T.);+#4652=VERTEX_POINT('',#4653);+#4653=CARTESIAN_POINT('',(-5.568163490354,1.075,0.1));+#4654=LINE('',#4648,#622);+#4655=ORIENTED_EDGE('',*,*,#4656,.T.);+#4656=EDGE_CURVE('',#4652,#4657,#4659,.T.);+#4657=VERTEX_POINT('',#4658);+#4658=CARTESIAN_POINT('',(-5.469682715053,1.075,0.182635182233));+#4659=CIRCLE('',#4660,0.1);+#4660=AXIS2_PLACEMENT_3D('',#4639,#2975,#2976);+#4661=ORIENTED_EDGE('',*,*,#4662,.T.);+#4662=EDGE_CURVE('',#4657,#4663,#4665,.T.);+#4663=VERTEX_POINT('',#4664);+#4664=CARTESIAN_POINT('',(-5.376961550602,1.075,0.734729635533));+#4665=LINE('',#4658,#2982);+#4666=ORIENTED_EDGE('',*,*,#4667,.T.);+#4667=EDGE_CURVE('',#4663,#4668,#4669,.T.);+#4668=VERTEX_POINT('',#4612);+#4669=CIRCLE('',#4670,0.2);+#4670=AXIS2_PLACEMENT_3D('',#4627,#2989,#2990);+#4671=ORIENTED_EDGE('',*,*,#4672,.T.);+#4672=EDGE_CURVE('',#4668,#1129,#4611,.T.);+#4673=PLANE('',#4674);+#4674=AXIS2_PLACEMENT_3D('',#4675,#685,#13);+#4675=CARTESIAN_POINT('',(-5.377811491544,1.075,0.447016202907));+#4676=ADVANCED_FACE('',(#4677),#4691,.F.);+#4677=FACE_BOUND('',#4678,.F.);+#4678=EDGE_LOOP('',(#4679,#4680,#4687,#4690));+#4679=ORIENTED_EDGE('',*,*,#1152,.T.);+#4680=ORIENTED_EDGE('',*,*,#4681,.T.);+#4681=EDGE_CURVE('',#1147,#4682,#4684,.T.);+#4682=VERTEX_POINT('',#4683);+#4683=CARTESIAN_POINT('',(-5.278480775301,1.325,0.717364817767));+#4684=CIRCLE('',#4685,1.E-01);+#4685=AXIS2_PLACEMENT_3D('',#4686,#2936,#2937);+#4686=CARTESIAN_POINT('',(-5.18,1.325,0.7));+#4687=ORIENTED_EDGE('',*,*,#4688,.F.);+#4688=EDGE_CURVE('',#4623,#4682,#4689,.T.);+#4689=LINE('',#4624,#684);+#4690=ORIENTED_EDGE('',*,*,#4622,.F.);+#4691=CYLINDRICAL_SURFACE('',#4626,1.E-01);+#4692=ADVANCED_FACE('',(#4693),#4742,.T.);+#4693=FACE_BOUND('',#4694,.T.);+#4694=EDGE_LOOP('',(#1159,#1145,#4680,#4695,#4700,#4707,#4712,#4717,#4722,#4728,#4733,#4739));+#4695=ORIENTED_EDGE('',*,*,#4696,.T.);+#4696=EDGE_CURVE('',#4682,#4697,#4699,.T.);+#4697=VERTEX_POINT('',#4698);+#4698=CARTESIAN_POINT('',(-5.371201939752,1.325,0.165270364467));+#4699=LINE('',#4683,#2943);+#4700=ORIENTED_EDGE('',*,*,#4701,.T.);+#4701=EDGE_CURVE('',#4697,#4702,#4704,.T.);+#4702=VERTEX_POINT('',#4703);+#4703=CARTESIAN_POINT('',(-5.568163490354,1.325,-1.387778780781E-16));+#4704=CIRCLE('',#4705,0.2);+#4705=AXIS2_PLACEMENT_3D('',#4706,#2952,#2953);+#4706=CARTESIAN_POINT('',(-5.568163490354,1.325,0.2));+#4707=ORIENTED_EDGE('',*,*,#4708,.T.);+#4708=EDGE_CURVE('',#4702,#4709,#4711,.T.);+#4709=VERTEX_POINT('',#4710);+#4710=CARTESIAN_POINT('',(-5.83,1.325,-1.387778780781E-16));+#4711=LINE('',#4703,#672);+#4712=ORIENTED_EDGE('',*,*,#4713,.T.);+#4713=EDGE_CURVE('',#4709,#4714,#4716,.T.);+#4714=VERTEX_POINT('',#4715);+#4715=CARTESIAN_POINT('',(-5.83,1.325,1.E-01));+#4716=LINE('',#4710,#658);+#4717=ORIENTED_EDGE('',*,*,#4718,.T.);+#4718=EDGE_CURVE('',#4714,#4719,#4721,.T.);+#4719=VERTEX_POINT('',#4720);+#4720=CARTESIAN_POINT('',(-5.568163490354,1.325,0.1));+#4721=LINE('',#4715,#622);+#4722=ORIENTED_EDGE('',*,*,#4723,.T.);+#4723=EDGE_CURVE('',#4719,#4724,#4726,.T.);+#4724=VERTEX_POINT('',#4725);+#4725=CARTESIAN_POINT('',(-5.469682715053,1.325,0.182635182233));+#4726=CIRCLE('',#4727,0.1);+#4727=AXIS2_PLACEMENT_3D('',#4706,#2975,#2976);+#4728=ORIENTED_EDGE('',*,*,#4729,.T.);+#4729=EDGE_CURVE('',#4724,#4730,#4732,.T.);+#4730=VERTEX_POINT('',#4731);+#4731=CARTESIAN_POINT('',(-5.376961550602,1.325,0.734729635533));+#4732=LINE('',#4725,#2982);+#4733=ORIENTED_EDGE('',*,*,#4734,.T.);+#4734=EDGE_CURVE('',#4730,#4735,#4737,.T.);+#4735=VERTEX_POINT('',#4736);+#4736=CARTESIAN_POINT('',(-5.18,1.325,0.9));+#4737=CIRCLE('',#4738,0.2);+#4738=AXIS2_PLACEMENT_3D('',#4686,#2989,#2990);+#4739=ORIENTED_EDGE('',*,*,#4740,.T.);+#4740=EDGE_CURVE('',#4735,#1161,#4741,.T.);+#4741=LINE('',#4736,#622);+#4742=PLANE('',#4743);+#4743=AXIS2_PLACEMENT_3D('',#4744,#685,#13);+#4744=CARTESIAN_POINT('',(-5.377811491544,1.325,0.447016202907));+#4745=ADVANCED_FACE('',(#4746),#628,.F.);+#4746=FACE_BOUND('',#4747,.F.);+#4747=EDGE_LOOP('',(#4748,#4749,#4753,#4754));+#4748=ORIENTED_EDGE('',*,*,#1173,.T.);+#4749=ORIENTED_EDGE('',*,*,#4750,.T.);+#4750=EDGE_CURVE('',#1168,#2561,#4751,.T.);+#4751=LINE('',#4752,#622);+#4752=CARTESIAN_POINT('',(-5.18,1.875,0.9));+#4753=ORIENTED_EDGE('',*,*,#2560,.F.);+#4754=ORIENTED_EDGE('',*,*,#4755,.F.);+#4755=EDGE_CURVE('',#1161,#2557,#4741,.T.);+#4756=ADVANCED_FACE('',(#4757),#4813,.F.);+#4757=FACE_BOUND('',#4758,.F.);+#4758=EDGE_LOOP('',(#4759,#4760,#4761,#4768,#4773,#4780,#4785,#4790,#4795,#4801,#4806,#4811));+#4759=ORIENTED_EDGE('',*,*,#1167,.F.);+#4760=ORIENTED_EDGE('',*,*,#1178,.T.);+#4761=ORIENTED_EDGE('',*,*,#4762,.T.);+#4762=EDGE_CURVE('',#1179,#4763,#4765,.T.);+#4763=VERTEX_POINT('',#4764);+#4764=CARTESIAN_POINT('',(-5.278480775301,1.875,0.717364817767));+#4765=CIRCLE('',#4766,1.E-01);+#4766=AXIS2_PLACEMENT_3D('',#4767,#2936,#2937);+#4767=CARTESIAN_POINT('',(-5.18,1.875,0.7));+#4768=ORIENTED_EDGE('',*,*,#4769,.T.);+#4769=EDGE_CURVE('',#4763,#4770,#4772,.T.);+#4770=VERTEX_POINT('',#4771);+#4771=CARTESIAN_POINT('',(-5.371201939752,1.875,0.165270364467));+#4772=LINE('',#4764,#2943);+#4773=ORIENTED_EDGE('',*,*,#4774,.T.);+#4774=EDGE_CURVE('',#4770,#4775,#4777,.T.);+#4775=VERTEX_POINT('',#4776);+#4776=CARTESIAN_POINT('',(-5.568163490354,1.875,-1.387778780781E-16));+#4777=CIRCLE('',#4778,0.2);+#4778=AXIS2_PLACEMENT_3D('',#4779,#2952,#2953);+#4779=CARTESIAN_POINT('',(-5.568163490354,1.875,0.2));+#4780=ORIENTED_EDGE('',*,*,#4781,.T.);+#4781=EDGE_CURVE('',#4775,#4782,#4784,.T.);+#4782=VERTEX_POINT('',#4783);+#4783=CARTESIAN_POINT('',(-5.83,1.875,-1.387778780781E-16));+#4784=LINE('',#4776,#672);+#4785=ORIENTED_EDGE('',*,*,#4786,.T.);+#4786=EDGE_CURVE('',#4782,#4787,#4789,.T.);+#4787=VERTEX_POINT('',#4788);+#4788=CARTESIAN_POINT('',(-5.83,1.875,1.E-01));+#4789=LINE('',#4783,#658);+#4790=ORIENTED_EDGE('',*,*,#4791,.T.);+#4791=EDGE_CURVE('',#4787,#4792,#4794,.T.);+#4792=VERTEX_POINT('',#4793);+#4793=CARTESIAN_POINT('',(-5.568163490354,1.875,0.1));+#4794=LINE('',#4788,#622);+#4795=ORIENTED_EDGE('',*,*,#4796,.T.);+#4796=EDGE_CURVE('',#4792,#4797,#4799,.T.);+#4797=VERTEX_POINT('',#4798);+#4798=CARTESIAN_POINT('',(-5.469682715053,1.875,0.182635182233));+#4799=CIRCLE('',#4800,0.1);+#4800=AXIS2_PLACEMENT_3D('',#4779,#2975,#2976);+#4801=ORIENTED_EDGE('',*,*,#4802,.T.);+#4802=EDGE_CURVE('',#4797,#4803,#4805,.T.);+#4803=VERTEX_POINT('',#4804);+#4804=CARTESIAN_POINT('',(-5.376961550602,1.875,0.734729635533));+#4805=LINE('',#4798,#2982);+#4806=ORIENTED_EDGE('',*,*,#4807,.T.);+#4807=EDGE_CURVE('',#4803,#4808,#4809,.T.);+#4808=VERTEX_POINT('',#4752);+#4809=CIRCLE('',#4810,0.2);+#4810=AXIS2_PLACEMENT_3D('',#4767,#2989,#2990);+#4811=ORIENTED_EDGE('',*,*,#4812,.T.);+#4812=EDGE_CURVE('',#4808,#1168,#4751,.T.);+#4813=PLANE('',#4814);+#4814=AXIS2_PLACEMENT_3D('',#4815,#685,#13);+#4815=CARTESIAN_POINT('',(-5.377811491544,1.875,0.447016202907));+#4816=ADVANCED_FACE('',(#4817),#4831,.F.);+#4817=FACE_BOUND('',#4818,.F.);+#4818=EDGE_LOOP('',(#4819,#4820,#4827,#4830));+#4819=ORIENTED_EDGE('',*,*,#1191,.T.);+#4820=ORIENTED_EDGE('',*,*,#4821,.T.);+#4821=EDGE_CURVE('',#1186,#4822,#4824,.T.);+#4822=VERTEX_POINT('',#4823);+#4823=CARTESIAN_POINT('',(-5.278480775301,2.125,0.717364817767));+#4824=CIRCLE('',#4825,1.E-01);+#4825=AXIS2_PLACEMENT_3D('',#4826,#2936,#2937);+#4826=CARTESIAN_POINT('',(-5.18,2.125,0.7));+#4827=ORIENTED_EDGE('',*,*,#4828,.F.);+#4828=EDGE_CURVE('',#4763,#4822,#4829,.T.);+#4829=LINE('',#4764,#684);+#4830=ORIENTED_EDGE('',*,*,#4762,.F.);+#4831=CYLINDRICAL_SURFACE('',#4766,1.E-01);+#4832=ADVANCED_FACE('',(#4833),#4882,.T.);+#4833=FACE_BOUND('',#4834,.T.);+#4834=EDGE_LOOP('',(#1198,#1184,#4820,#4835,#4840,#4847,#4852,#4857,#4862,#4868,#4873,#4879));+#4835=ORIENTED_EDGE('',*,*,#4836,.T.);+#4836=EDGE_CURVE('',#4822,#4837,#4839,.T.);+#4837=VERTEX_POINT('',#4838);+#4838=CARTESIAN_POINT('',(-5.371201939752,2.125,0.165270364467));+#4839=LINE('',#4823,#2943);+#4840=ORIENTED_EDGE('',*,*,#4841,.T.);+#4841=EDGE_CURVE('',#4837,#4842,#4844,.T.);+#4842=VERTEX_POINT('',#4843);+#4843=CARTESIAN_POINT('',(-5.568163490354,2.125,-1.387778780781E-16));+#4844=CIRCLE('',#4845,0.2);+#4845=AXIS2_PLACEMENT_3D('',#4846,#2952,#2953);+#4846=CARTESIAN_POINT('',(-5.568163490354,2.125,0.2));+#4847=ORIENTED_EDGE('',*,*,#4848,.T.);+#4848=EDGE_CURVE('',#4842,#4849,#4851,.T.);+#4849=VERTEX_POINT('',#4850);+#4850=CARTESIAN_POINT('',(-5.83,2.125,-1.387778780781E-16));+#4851=LINE('',#4843,#672);+#4852=ORIENTED_EDGE('',*,*,#4853,.T.);+#4853=EDGE_CURVE('',#4849,#4854,#4856,.T.);+#4854=VERTEX_POINT('',#4855);+#4855=CARTESIAN_POINT('',(-5.83,2.125,1.E-01));+#4856=LINE('',#4850,#658);+#4857=ORIENTED_EDGE('',*,*,#4858,.T.);+#4858=EDGE_CURVE('',#4854,#4859,#4861,.T.);+#4859=VERTEX_POINT('',#4860);+#4860=CARTESIAN_POINT('',(-5.568163490354,2.125,0.1));+#4861=LINE('',#4855,#622);+#4862=ORIENTED_EDGE('',*,*,#4863,.T.);+#4863=EDGE_CURVE('',#4859,#4864,#4866,.T.);+#4864=VERTEX_POINT('',#4865);+#4865=CARTESIAN_POINT('',(-5.469682715053,2.125,0.182635182233));+#4866=CIRCLE('',#4867,0.1);+#4867=AXIS2_PLACEMENT_3D('',#4846,#2975,#2976);+#4868=ORIENTED_EDGE('',*,*,#4869,.T.);+#4869=EDGE_CURVE('',#4864,#4870,#4872,.T.);+#4870=VERTEX_POINT('',#4871);+#4871=CARTESIAN_POINT('',(-5.376961550602,2.125,0.734729635533));+#4872=LINE('',#4865,#2982);+#4873=ORIENTED_EDGE('',*,*,#4874,.T.);+#4874=EDGE_CURVE('',#4870,#4875,#4877,.T.);+#4875=VERTEX_POINT('',#4876);+#4876=CARTESIAN_POINT('',(-5.18,2.125,0.9));+#4877=CIRCLE('',#4878,0.2);+#4878=AXIS2_PLACEMENT_3D('',#4826,#2989,#2990);+#4879=ORIENTED_EDGE('',*,*,#4880,.T.);+#4880=EDGE_CURVE('',#4875,#1200,#4881,.T.);+#4881=LINE('',#4876,#622);+#4882=PLANE('',#4883);+#4883=AXIS2_PLACEMENT_3D('',#4884,#685,#13);+#4884=CARTESIAN_POINT('',(-5.377811491544,2.125,0.447016202907));+#4885=ADVANCED_FACE('',(#4886),#628,.F.);+#4886=FACE_BOUND('',#4887,.F.);+#4887=EDGE_LOOP('',(#4888,#4889,#4893,#4894));+#4888=ORIENTED_EDGE('',*,*,#1212,.T.);+#4889=ORIENTED_EDGE('',*,*,#4890,.T.);+#4890=EDGE_CURVE('',#1207,#2569,#4891,.T.);+#4891=LINE('',#4892,#622);+#4892=CARTESIAN_POINT('',(-5.18,2.675,0.9));+#4893=ORIENTED_EDGE('',*,*,#2568,.F.);+#4894=ORIENTED_EDGE('',*,*,#4895,.F.);+#4895=EDGE_CURVE('',#1200,#2565,#4881,.T.);+#4896=ADVANCED_FACE('',(#4897),#4953,.F.);+#4897=FACE_BOUND('',#4898,.F.);+#4898=EDGE_LOOP('',(#4899,#4900,#4901,#4908,#4913,#4920,#4925,#4930,#4935,#4941,#4946,#4951));+#4899=ORIENTED_EDGE('',*,*,#1206,.F.);+#4900=ORIENTED_EDGE('',*,*,#1217,.T.);+#4901=ORIENTED_EDGE('',*,*,#4902,.T.);+#4902=EDGE_CURVE('',#1218,#4903,#4905,.T.);+#4903=VERTEX_POINT('',#4904);+#4904=CARTESIAN_POINT('',(-5.278480775301,2.675,0.717364817767));+#4905=CIRCLE('',#4906,1.E-01);+#4906=AXIS2_PLACEMENT_3D('',#4907,#2936,#2937);+#4907=CARTESIAN_POINT('',(-5.18,2.675,0.7));+#4908=ORIENTED_EDGE('',*,*,#4909,.T.);+#4909=EDGE_CURVE('',#4903,#4910,#4912,.T.);+#4910=VERTEX_POINT('',#4911);+#4911=CARTESIAN_POINT('',(-5.371201939752,2.675,0.165270364467));+#4912=LINE('',#4904,#2943);+#4913=ORIENTED_EDGE('',*,*,#4914,.T.);+#4914=EDGE_CURVE('',#4910,#4915,#4917,.T.);+#4915=VERTEX_POINT('',#4916);+#4916=CARTESIAN_POINT('',(-5.568163490354,2.675,-1.387778780781E-16));+#4917=CIRCLE('',#4918,0.2);+#4918=AXIS2_PLACEMENT_3D('',#4919,#2952,#2953);+#4919=CARTESIAN_POINT('',(-5.568163490354,2.675,0.2));+#4920=ORIENTED_EDGE('',*,*,#4921,.T.);+#4921=EDGE_CURVE('',#4915,#4922,#4924,.T.);+#4922=VERTEX_POINT('',#4923);+#4923=CARTESIAN_POINT('',(-5.83,2.675,-1.387778780781E-16));+#4924=LINE('',#4916,#672);+#4925=ORIENTED_EDGE('',*,*,#4926,.T.);+#4926=EDGE_CURVE('',#4922,#4927,#4929,.T.);+#4927=VERTEX_POINT('',#4928);+#4928=CARTESIAN_POINT('',(-5.83,2.675,1.E-01));+#4929=LINE('',#4923,#658);+#4930=ORIENTED_EDGE('',*,*,#4931,.T.);+#4931=EDGE_CURVE('',#4927,#4932,#4934,.T.);+#4932=VERTEX_POINT('',#4933);+#4933=CARTESIAN_POINT('',(-5.568163490354,2.675,0.1));+#4934=LINE('',#4928,#622);+#4935=ORIENTED_EDGE('',*,*,#4936,.T.);+#4936=EDGE_CURVE('',#4932,#4937,#4939,.T.);+#4937=VERTEX_POINT('',#4938);+#4938=CARTESIAN_POINT('',(-5.469682715053,2.675,0.182635182233));+#4939=CIRCLE('',#4940,0.1);+#4940=AXIS2_PLACEMENT_3D('',#4919,#2975,#2976);+#4941=ORIENTED_EDGE('',*,*,#4942,.T.);+#4942=EDGE_CURVE('',#4937,#4943,#4945,.T.);+#4943=VERTEX_POINT('',#4944);+#4944=CARTESIAN_POINT('',(-5.376961550602,2.675,0.734729635533));+#4945=LINE('',#4938,#2982);+#4946=ORIENTED_EDGE('',*,*,#4947,.T.);+#4947=EDGE_CURVE('',#4943,#4948,#4949,.T.);+#4948=VERTEX_POINT('',#4892);+#4949=CIRCLE('',#4950,0.2);+#4950=AXIS2_PLACEMENT_3D('',#4907,#2989,#2990);+#4951=ORIENTED_EDGE('',*,*,#4952,.T.);+#4952=EDGE_CURVE('',#4948,#1207,#4891,.T.);+#4953=PLANE('',#4954);+#4954=AXIS2_PLACEMENT_3D('',#4955,#685,#13);+#4955=CARTESIAN_POINT('',(-5.377811491544,2.675,0.447016202907));+#4956=ADVANCED_FACE('',(#4957),#4971,.F.);+#4957=FACE_BOUND('',#4958,.F.);+#4958=EDGE_LOOP('',(#4959,#4960,#4967,#4970));+#4959=ORIENTED_EDGE('',*,*,#1230,.T.);+#4960=ORIENTED_EDGE('',*,*,#4961,.T.);+#4961=EDGE_CURVE('',#1225,#4962,#4964,.T.);+#4962=VERTEX_POINT('',#4963);+#4963=CARTESIAN_POINT('',(-5.278480775301,2.925,0.717364817767));+#4964=CIRCLE('',#4965,1.E-01);+#4965=AXIS2_PLACEMENT_3D('',#4966,#2936,#2937);+#4966=CARTESIAN_POINT('',(-5.18,2.925,0.7));+#4967=ORIENTED_EDGE('',*,*,#4968,.F.);+#4968=EDGE_CURVE('',#4903,#4962,#4969,.T.);+#4969=LINE('',#4904,#684);+#4970=ORIENTED_EDGE('',*,*,#4902,.F.);+#4971=CYLINDRICAL_SURFACE('',#4906,1.E-01);+#4972=ADVANCED_FACE('',(#4973),#5022,.T.);+#4973=FACE_BOUND('',#4974,.T.);+#4974=EDGE_LOOP('',(#1237,#1223,#4960,#4975,#4980,#4987,#4992,#4997,#5002,#5008,#5013,#5019));+#4975=ORIENTED_EDGE('',*,*,#4976,.T.);+#4976=EDGE_CURVE('',#4962,#4977,#4979,.T.);+#4977=VERTEX_POINT('',#4978);+#4978=CARTESIAN_POINT('',(-5.371201939752,2.925,0.165270364467));+#4979=LINE('',#4963,#2943);+#4980=ORIENTED_EDGE('',*,*,#4981,.T.);+#4981=EDGE_CURVE('',#4977,#4982,#4984,.T.);+#4982=VERTEX_POINT('',#4983);+#4983=CARTESIAN_POINT('',(-5.568163490354,2.925,-1.387778780781E-16));+#4984=CIRCLE('',#4985,0.2);+#4985=AXIS2_PLACEMENT_3D('',#4986,#2952,#2953);+#4986=CARTESIAN_POINT('',(-5.568163490354,2.925,0.2));+#4987=ORIENTED_EDGE('',*,*,#4988,.T.);+#4988=EDGE_CURVE('',#4982,#4989,#4991,.T.);+#4989=VERTEX_POINT('',#4990);+#4990=CARTESIAN_POINT('',(-5.83,2.925,-1.387778780781E-16));+#4991=LINE('',#4983,#672);+#4992=ORIENTED_EDGE('',*,*,#4993,.T.);+#4993=EDGE_CURVE('',#4989,#4994,#4996,.T.);+#4994=VERTEX_POINT('',#4995);+#4995=CARTESIAN_POINT('',(-5.83,2.925,1.E-01));+#4996=LINE('',#4990,#658);+#4997=ORIENTED_EDGE('',*,*,#4998,.T.);+#4998=EDGE_CURVE('',#4994,#4999,#5001,.T.);+#4999=VERTEX_POINT('',#5000);+#5000=CARTESIAN_POINT('',(-5.568163490354,2.925,0.1));+#5001=LINE('',#4995,#622);+#5002=ORIENTED_EDGE('',*,*,#5003,.T.);+#5003=EDGE_CURVE('',#4999,#5004,#5006,.T.);+#5004=VERTEX_POINT('',#5005);+#5005=CARTESIAN_POINT('',(-5.469682715053,2.925,0.182635182233));+#5006=CIRCLE('',#5007,0.1);+#5007=AXIS2_PLACEMENT_3D('',#4986,#2975,#2976);+#5008=ORIENTED_EDGE('',*,*,#5009,.T.);+#5009=EDGE_CURVE('',#5004,#5010,#5012,.T.);+#5010=VERTEX_POINT('',#5011);+#5011=CARTESIAN_POINT('',(-5.376961550602,2.925,0.734729635533));+#5012=LINE('',#5005,#2982);+#5013=ORIENTED_EDGE('',*,*,#5014,.T.);+#5014=EDGE_CURVE('',#5010,#5015,#5017,.T.);+#5015=VERTEX_POINT('',#5016);+#5016=CARTESIAN_POINT('',(-5.18,2.925,0.9));+#5017=CIRCLE('',#5018,0.2);+#5018=AXIS2_PLACEMENT_3D('',#4966,#2989,#2990);+#5019=ORIENTED_EDGE('',*,*,#5020,.T.);+#5020=EDGE_CURVE('',#5015,#1239,#5021,.T.);+#5021=LINE('',#5016,#622);+#5022=PLANE('',#5023);+#5023=AXIS2_PLACEMENT_3D('',#5024,#685,#13);+#5024=CARTESIAN_POINT('',(-5.377811491544,2.925,0.447016202907));+#5025=ADVANCED_FACE('',(#5026),#628,.F.);+#5026=FACE_BOUND('',#5027,.F.);+#5027=EDGE_LOOP('',(#5028,#5029,#5033,#5034));+#5028=ORIENTED_EDGE('',*,*,#1251,.T.);+#5029=ORIENTED_EDGE('',*,*,#5030,.T.);+#5030=EDGE_CURVE('',#1246,#2577,#5031,.T.);+#5031=LINE('',#5032,#622);+#5032=CARTESIAN_POINT('',(-5.18,3.475,0.9));+#5033=ORIENTED_EDGE('',*,*,#2576,.F.);+#5034=ORIENTED_EDGE('',*,*,#5035,.F.);+#5035=EDGE_CURVE('',#1239,#2573,#5021,.T.);+#5036=ADVANCED_FACE('',(#5037),#5093,.F.);+#5037=FACE_BOUND('',#5038,.F.);+#5038=EDGE_LOOP('',(#5039,#5040,#5041,#5048,#5053,#5060,#5065,#5070,#5075,#5081,#5086,#5091));+#5039=ORIENTED_EDGE('',*,*,#1245,.F.);+#5040=ORIENTED_EDGE('',*,*,#1256,.T.);+#5041=ORIENTED_EDGE('',*,*,#5042,.T.);+#5042=EDGE_CURVE('',#1257,#5043,#5045,.T.);+#5043=VERTEX_POINT('',#5044);+#5044=CARTESIAN_POINT('',(-5.278480775301,3.475,0.717364817767));+#5045=CIRCLE('',#5046,1.E-01);+#5046=AXIS2_PLACEMENT_3D('',#5047,#2936,#2937);+#5047=CARTESIAN_POINT('',(-5.18,3.475,0.7));+#5048=ORIENTED_EDGE('',*,*,#5049,.T.);+#5049=EDGE_CURVE('',#5043,#5050,#5052,.T.);+#5050=VERTEX_POINT('',#5051);+#5051=CARTESIAN_POINT('',(-5.371201939752,3.475,0.165270364467));+#5052=LINE('',#5044,#2943);+#5053=ORIENTED_EDGE('',*,*,#5054,.T.);+#5054=EDGE_CURVE('',#5050,#5055,#5057,.T.);+#5055=VERTEX_POINT('',#5056);+#5056=CARTESIAN_POINT('',(-5.568163490354,3.475,-1.387778780781E-16));+#5057=CIRCLE('',#5058,0.2);+#5058=AXIS2_PLACEMENT_3D('',#5059,#2952,#2953);+#5059=CARTESIAN_POINT('',(-5.568163490354,3.475,0.2));+#5060=ORIENTED_EDGE('',*,*,#5061,.T.);+#5061=EDGE_CURVE('',#5055,#5062,#5064,.T.);+#5062=VERTEX_POINT('',#5063);+#5063=CARTESIAN_POINT('',(-5.83,3.475,-1.387778780781E-16));+#5064=LINE('',#5056,#672);+#5065=ORIENTED_EDGE('',*,*,#5066,.T.);+#5066=EDGE_CURVE('',#5062,#5067,#5069,.T.);+#5067=VERTEX_POINT('',#5068);+#5068=CARTESIAN_POINT('',(-5.83,3.475,1.E-01));+#5069=LINE('',#5063,#658);+#5070=ORIENTED_EDGE('',*,*,#5071,.T.);+#5071=EDGE_CURVE('',#5067,#5072,#5074,.T.);+#5072=VERTEX_POINT('',#5073);+#5073=CARTESIAN_POINT('',(-5.568163490354,3.475,0.1));+#5074=LINE('',#5068,#622);+#5075=ORIENTED_EDGE('',*,*,#5076,.T.);+#5076=EDGE_CURVE('',#5072,#5077,#5079,.T.);+#5077=VERTEX_POINT('',#5078);+#5078=CARTESIAN_POINT('',(-5.469682715053,3.475,0.182635182233));+#5079=CIRCLE('',#5080,0.1);+#5080=AXIS2_PLACEMENT_3D('',#5059,#2975,#2976);+#5081=ORIENTED_EDGE('',*,*,#5082,.T.);+#5082=EDGE_CURVE('',#5077,#5083,#5085,.T.);+#5083=VERTEX_POINT('',#5084);+#5084=CARTESIAN_POINT('',(-5.376961550602,3.475,0.734729635533));+#5085=LINE('',#5078,#2982);+#5086=ORIENTED_EDGE('',*,*,#5087,.T.);+#5087=EDGE_CURVE('',#5083,#5088,#5089,.T.);+#5088=VERTEX_POINT('',#5032);+#5089=CIRCLE('',#5090,0.2);+#5090=AXIS2_PLACEMENT_3D('',#5047,#2989,#2990);+#5091=ORIENTED_EDGE('',*,*,#5092,.T.);+#5092=EDGE_CURVE('',#5088,#1246,#5031,.T.);+#5093=PLANE('',#5094);+#5094=AXIS2_PLACEMENT_3D('',#5095,#685,#13);+#5095=CARTESIAN_POINT('',(-5.377811491544,3.475,0.447016202907));+#5096=ADVANCED_FACE('',(#5097),#5111,.F.);+#5097=FACE_BOUND('',#5098,.F.);+#5098=EDGE_LOOP('',(#5099,#5100,#5107,#5110));+#5099=ORIENTED_EDGE('',*,*,#1269,.T.);+#5100=ORIENTED_EDGE('',*,*,#5101,.T.);+#5101=EDGE_CURVE('',#1264,#5102,#5104,.T.);+#5102=VERTEX_POINT('',#5103);+#5103=CARTESIAN_POINT('',(-5.278480775301,3.725,0.717364817767));+#5104=CIRCLE('',#5105,1.E-01);+#5105=AXIS2_PLACEMENT_3D('',#5106,#2936,#2937);+#5106=CARTESIAN_POINT('',(-5.18,3.725,0.7));+#5107=ORIENTED_EDGE('',*,*,#5108,.F.);+#5108=EDGE_CURVE('',#5043,#5102,#5109,.T.);+#5109=LINE('',#5044,#684);+#5110=ORIENTED_EDGE('',*,*,#5042,.F.);+#5111=CYLINDRICAL_SURFACE('',#5046,1.E-01);+#5112=ADVANCED_FACE('',(#5113),#5162,.T.);+#5113=FACE_BOUND('',#5114,.T.);+#5114=EDGE_LOOP('',(#1276,#1262,#5100,#5115,#5120,#5127,#5132,#5137,#5142,#5148,#5153,#5159));+#5115=ORIENTED_EDGE('',*,*,#5116,.T.);+#5116=EDGE_CURVE('',#5102,#5117,#5119,.T.);+#5117=VERTEX_POINT('',#5118);+#5118=CARTESIAN_POINT('',(-5.371201939752,3.725,0.165270364467));+#5119=LINE('',#5103,#2943);+#5120=ORIENTED_EDGE('',*,*,#5121,.T.);+#5121=EDGE_CURVE('',#5117,#5122,#5124,.T.);+#5122=VERTEX_POINT('',#5123);+#5123=CARTESIAN_POINT('',(-5.568163490354,3.725,-1.387778780781E-16));+#5124=CIRCLE('',#5125,0.2);+#5125=AXIS2_PLACEMENT_3D('',#5126,#2952,#2953);+#5126=CARTESIAN_POINT('',(-5.568163490354,3.725,0.2));+#5127=ORIENTED_EDGE('',*,*,#5128,.T.);+#5128=EDGE_CURVE('',#5122,#5129,#5131,.T.);+#5129=VERTEX_POINT('',#5130);+#5130=CARTESIAN_POINT('',(-5.83,3.725,-1.387778780781E-16));+#5131=LINE('',#5123,#672);+#5132=ORIENTED_EDGE('',*,*,#5133,.T.);+#5133=EDGE_CURVE('',#5129,#5134,#5136,.T.);+#5134=VERTEX_POINT('',#5135);+#5135=CARTESIAN_POINT('',(-5.83,3.725,1.E-01));+#5136=LINE('',#5130,#658);+#5137=ORIENTED_EDGE('',*,*,#5138,.T.);+#5138=EDGE_CURVE('',#5134,#5139,#5141,.T.);+#5139=VERTEX_POINT('',#5140);+#5140=CARTESIAN_POINT('',(-5.568163490354,3.725,0.1));+#5141=LINE('',#5135,#622);+#5142=ORIENTED_EDGE('',*,*,#5143,.T.);+#5143=EDGE_CURVE('',#5139,#5144,#5146,.T.);+#5144=VERTEX_POINT('',#5145);+#5145=CARTESIAN_POINT('',(-5.469682715053,3.725,0.182635182233));+#5146=CIRCLE('',#5147,0.1);+#5147=AXIS2_PLACEMENT_3D('',#5126,#2975,#2976);+#5148=ORIENTED_EDGE('',*,*,#5149,.T.);+#5149=EDGE_CURVE('',#5144,#5150,#5152,.T.);+#5150=VERTEX_POINT('',#5151);+#5151=CARTESIAN_POINT('',(-5.376961550602,3.725,0.734729635533));+#5152=LINE('',#5145,#2982);+#5153=ORIENTED_EDGE('',*,*,#5154,.T.);+#5154=EDGE_CURVE('',#5150,#5155,#5157,.T.);+#5155=VERTEX_POINT('',#5156);+#5156=CARTESIAN_POINT('',(-5.18,3.725,0.9));+#5157=CIRCLE('',#5158,0.2);+#5158=AXIS2_PLACEMENT_3D('',#5106,#2989,#2990);+#5159=ORIENTED_EDGE('',*,*,#5160,.T.);+#5160=EDGE_CURVE('',#5155,#1278,#5161,.T.);+#5161=LINE('',#5156,#622);+#5162=PLANE('',#5163);+#5163=AXIS2_PLACEMENT_3D('',#5164,#685,#13);+#5164=CARTESIAN_POINT('',(-5.377811491544,3.725,0.447016202907));+#5165=ADVANCED_FACE('',(#5166),#628,.F.);+#5166=FACE_BOUND('',#5167,.F.);+#5167=EDGE_LOOP('',(#5168,#5169,#5173,#5174));+#5168=ORIENTED_EDGE('',*,*,#1290,.T.);+#5169=ORIENTED_EDGE('',*,*,#5170,.T.);+#5170=EDGE_CURVE('',#1285,#2585,#5171,.T.);+#5171=LINE('',#5172,#622);+#5172=CARTESIAN_POINT('',(-5.18,4.275,0.9));+#5173=ORIENTED_EDGE('',*,*,#2584,.F.);+#5174=ORIENTED_EDGE('',*,*,#5175,.F.);+#5175=EDGE_CURVE('',#1278,#2581,#5161,.T.);+#5176=ADVANCED_FACE('',(#5177),#5233,.F.);+#5177=FACE_BOUND('',#5178,.F.);+#5178=EDGE_LOOP('',(#5179,#5180,#5181,#5188,#5193,#5200,#5205,#5210,#5215,#5221,#5226,#5231));+#5179=ORIENTED_EDGE('',*,*,#1284,.F.);+#5180=ORIENTED_EDGE('',*,*,#1295,.T.);+#5181=ORIENTED_EDGE('',*,*,#5182,.T.);+#5182=EDGE_CURVE('',#1296,#5183,#5185,.T.);+#5183=VERTEX_POINT('',#5184);+#5184=CARTESIAN_POINT('',(-5.278480775301,4.275,0.717364817767));+#5185=CIRCLE('',#5186,1.E-01);+#5186=AXIS2_PLACEMENT_3D('',#5187,#2936,#2937);+#5187=CARTESIAN_POINT('',(-5.18,4.275,0.7));+#5188=ORIENTED_EDGE('',*,*,#5189,.T.);+#5189=EDGE_CURVE('',#5183,#5190,#5192,.T.);+#5190=VERTEX_POINT('',#5191);+#5191=CARTESIAN_POINT('',(-5.371201939752,4.275,0.165270364467));+#5192=LINE('',#5184,#2943);+#5193=ORIENTED_EDGE('',*,*,#5194,.T.);+#5194=EDGE_CURVE('',#5190,#5195,#5197,.T.);+#5195=VERTEX_POINT('',#5196);+#5196=CARTESIAN_POINT('',(-5.568163490354,4.275,-1.387778780781E-16));+#5197=CIRCLE('',#5198,0.2);+#5198=AXIS2_PLACEMENT_3D('',#5199,#2952,#2953);+#5199=CARTESIAN_POINT('',(-5.568163490354,4.275,0.2));+#5200=ORIENTED_EDGE('',*,*,#5201,.T.);+#5201=EDGE_CURVE('',#5195,#5202,#5204,.T.);+#5202=VERTEX_POINT('',#5203);+#5203=CARTESIAN_POINT('',(-5.83,4.275,-1.387778780781E-16));+#5204=LINE('',#5196,#672);+#5205=ORIENTED_EDGE('',*,*,#5206,.T.);+#5206=EDGE_CURVE('',#5202,#5207,#5209,.T.);+#5207=VERTEX_POINT('',#5208);+#5208=CARTESIAN_POINT('',(-5.83,4.275,1.E-01));+#5209=LINE('',#5203,#658);+#5210=ORIENTED_EDGE('',*,*,#5211,.T.);+#5211=EDGE_CURVE('',#5207,#5212,#5214,.T.);+#5212=VERTEX_POINT('',#5213);+#5213=CARTESIAN_POINT('',(-5.568163490354,4.275,0.1));+#5214=LINE('',#5208,#622);+#5215=ORIENTED_EDGE('',*,*,#5216,.T.);+#5216=EDGE_CURVE('',#5212,#5217,#5219,.T.);+#5217=VERTEX_POINT('',#5218);+#5218=CARTESIAN_POINT('',(-5.469682715053,4.275,0.182635182233));+#5219=CIRCLE('',#5220,0.1);+#5220=AXIS2_PLACEMENT_3D('',#5199,#2975,#2976);+#5221=ORIENTED_EDGE('',*,*,#5222,.T.);+#5222=EDGE_CURVE('',#5217,#5223,#5225,.T.);+#5223=VERTEX_POINT('',#5224);+#5224=CARTESIAN_POINT('',(-5.376961550602,4.275,0.734729635533));+#5225=LINE('',#5218,#2982);+#5226=ORIENTED_EDGE('',*,*,#5227,.T.);+#5227=EDGE_CURVE('',#5223,#5228,#5229,.T.);+#5228=VERTEX_POINT('',#5172);+#5229=CIRCLE('',#5230,0.2);+#5230=AXIS2_PLACEMENT_3D('',#5187,#2989,#2990);+#5231=ORIENTED_EDGE('',*,*,#5232,.T.);+#5232=EDGE_CURVE('',#5228,#1285,#5171,.T.);+#5233=PLANE('',#5234);+#5234=AXIS2_PLACEMENT_3D('',#5235,#685,#13);+#5235=CARTESIAN_POINT('',(-5.377811491544,4.275,0.447016202907));+#5236=ADVANCED_FACE('',(#5237),#5251,.F.);+#5237=FACE_BOUND('',#5238,.F.);+#5238=EDGE_LOOP('',(#5239,#5240,#5247,#5250));+#5239=ORIENTED_EDGE('',*,*,#1308,.T.);+#5240=ORIENTED_EDGE('',*,*,#5241,.T.);+#5241=EDGE_CURVE('',#1303,#5242,#5244,.T.);+#5242=VERTEX_POINT('',#5243);+#5243=CARTESIAN_POINT('',(-5.278480775301,4.525,0.717364817767));+#5244=CIRCLE('',#5245,1.E-01);+#5245=AXIS2_PLACEMENT_3D('',#5246,#2936,#2937);+#5246=CARTESIAN_POINT('',(-5.18,4.525,0.7));+#5247=ORIENTED_EDGE('',*,*,#5248,.F.);+#5248=EDGE_CURVE('',#5183,#5242,#5249,.T.);+#5249=LINE('',#5184,#684);+#5250=ORIENTED_EDGE('',*,*,#5182,.F.);+#5251=CYLINDRICAL_SURFACE('',#5186,1.E-01);+#5252=ADVANCED_FACE('',(#5253),#5302,.T.);+#5253=FACE_BOUND('',#5254,.T.);+#5254=EDGE_LOOP('',(#1315,#1301,#5240,#5255,#5260,#5267,#5272,#5277,#5282,#5288,#5293,#5299));+#5255=ORIENTED_EDGE('',*,*,#5256,.T.);+#5256=EDGE_CURVE('',#5242,#5257,#5259,.T.);+#5257=VERTEX_POINT('',#5258);+#5258=CARTESIAN_POINT('',(-5.371201939752,4.525,0.165270364467));+#5259=LINE('',#5243,#2943);+#5260=ORIENTED_EDGE('',*,*,#5261,.T.);+#5261=EDGE_CURVE('',#5257,#5262,#5264,.T.);+#5262=VERTEX_POINT('',#5263);+#5263=CARTESIAN_POINT('',(-5.568163490354,4.525,-1.387778780781E-16));+#5264=CIRCLE('',#5265,0.2);+#5265=AXIS2_PLACEMENT_3D('',#5266,#2952,#2953);+#5266=CARTESIAN_POINT('',(-5.568163490354,4.525,0.2));+#5267=ORIENTED_EDGE('',*,*,#5268,.T.);+#5268=EDGE_CURVE('',#5262,#5269,#5271,.T.);+#5269=VERTEX_POINT('',#5270);+#5270=CARTESIAN_POINT('',(-5.83,4.525,-1.387778780781E-16));+#5271=LINE('',#5263,#672);+#5272=ORIENTED_EDGE('',*,*,#5273,.T.);+#5273=EDGE_CURVE('',#5269,#5274,#5276,.T.);+#5274=VERTEX_POINT('',#5275);+#5275=CARTESIAN_POINT('',(-5.83,4.525,1.E-01));+#5276=LINE('',#5270,#658);+#5277=ORIENTED_EDGE('',*,*,#5278,.T.);+#5278=EDGE_CURVE('',#5274,#5279,#5281,.T.);+#5279=VERTEX_POINT('',#5280);+#5280=CARTESIAN_POINT('',(-5.568163490354,4.525,0.1));+#5281=LINE('',#5275,#622);+#5282=ORIENTED_EDGE('',*,*,#5283,.T.);+#5283=EDGE_CURVE('',#5279,#5284,#5286,.T.);+#5284=VERTEX_POINT('',#5285);+#5285=CARTESIAN_POINT('',(-5.469682715053,4.525,0.182635182233));+#5286=CIRCLE('',#5287,0.1);+#5287=AXIS2_PLACEMENT_3D('',#5266,#2975,#2976);+#5288=ORIENTED_EDGE('',*,*,#5289,.T.);+#5289=EDGE_CURVE('',#5284,#5290,#5292,.T.);+#5290=VERTEX_POINT('',#5291);+#5291=CARTESIAN_POINT('',(-5.376961550602,4.525,0.734729635533));+#5292=LINE('',#5285,#2982);+#5293=ORIENTED_EDGE('',*,*,#5294,.T.);+#5294=EDGE_CURVE('',#5290,#5295,#5297,.T.);+#5295=VERTEX_POINT('',#5296);+#5296=CARTESIAN_POINT('',(-5.18,4.525,0.9));+#5297=CIRCLE('',#5298,0.2);+#5298=AXIS2_PLACEMENT_3D('',#5246,#2989,#2990);+#5299=ORIENTED_EDGE('',*,*,#5300,.T.);+#5300=EDGE_CURVE('',#5295,#1317,#5301,.T.);+#5301=LINE('',#5296,#622);+#5302=PLANE('',#5303);+#5303=AXIS2_PLACEMENT_3D('',#5304,#685,#13);+#5304=CARTESIAN_POINT('',(-5.377811491544,4.525,0.447016202907));+#5305=ADVANCED_FACE('',(#5306),#628,.F.);+#5306=FACE_BOUND('',#5307,.F.);+#5307=EDGE_LOOP('',(#5308,#5309,#5313,#5314));+#5308=ORIENTED_EDGE('',*,*,#1329,.T.);+#5309=ORIENTED_EDGE('',*,*,#5310,.T.);+#5310=EDGE_CURVE('',#1324,#2593,#5311,.T.);+#5311=LINE('',#5312,#622);+#5312=CARTESIAN_POINT('',(-5.18,5.075,0.9));+#5313=ORIENTED_EDGE('',*,*,#2592,.F.);+#5314=ORIENTED_EDGE('',*,*,#5315,.F.);+#5315=EDGE_CURVE('',#1317,#2589,#5301,.T.);+#5316=ADVANCED_FACE('',(#5317),#5373,.F.);+#5317=FACE_BOUND('',#5318,.F.);+#5318=EDGE_LOOP('',(#5319,#5320,#5321,#5328,#5333,#5340,#5345,#5350,#5355,#5361,#5366,#5371));+#5319=ORIENTED_EDGE('',*,*,#1323,.F.);+#5320=ORIENTED_EDGE('',*,*,#1334,.T.);+#5321=ORIENTED_EDGE('',*,*,#5322,.T.);+#5322=EDGE_CURVE('',#1335,#5323,#5325,.T.);+#5323=VERTEX_POINT('',#5324);+#5324=CARTESIAN_POINT('',(-5.278480775301,5.075,0.717364817767));+#5325=CIRCLE('',#5326,1.E-01);+#5326=AXIS2_PLACEMENT_3D('',#5327,#2936,#2937);+#5327=CARTESIAN_POINT('',(-5.18,5.075,0.7));+#5328=ORIENTED_EDGE('',*,*,#5329,.T.);+#5329=EDGE_CURVE('',#5323,#5330,#5332,.T.);+#5330=VERTEX_POINT('',#5331);+#5331=CARTESIAN_POINT('',(-5.371201939752,5.075,0.165270364467));+#5332=LINE('',#5324,#2943);+#5333=ORIENTED_EDGE('',*,*,#5334,.T.);+#5334=EDGE_CURVE('',#5330,#5335,#5337,.T.);+#5335=VERTEX_POINT('',#5336);+#5336=CARTESIAN_POINT('',(-5.568163490354,5.075,-1.387778780781E-16));+#5337=CIRCLE('',#5338,0.2);+#5338=AXIS2_PLACEMENT_3D('',#5339,#2952,#2953);+#5339=CARTESIAN_POINT('',(-5.568163490354,5.075,0.2));+#5340=ORIENTED_EDGE('',*,*,#5341,.T.);+#5341=EDGE_CURVE('',#5335,#5342,#5344,.T.);+#5342=VERTEX_POINT('',#5343);+#5343=CARTESIAN_POINT('',(-5.83,5.075,-1.387778780781E-16));+#5344=LINE('',#5336,#672);+#5345=ORIENTED_EDGE('',*,*,#5346,.T.);+#5346=EDGE_CURVE('',#5342,#5347,#5349,.T.);+#5347=VERTEX_POINT('',#5348);+#5348=CARTESIAN_POINT('',(-5.83,5.075,1.E-01));+#5349=LINE('',#5343,#658);+#5350=ORIENTED_EDGE('',*,*,#5351,.T.);+#5351=EDGE_CURVE('',#5347,#5352,#5354,.T.);+#5352=VERTEX_POINT('',#5353);+#5353=CARTESIAN_POINT('',(-5.568163490354,5.075,0.1));+#5354=LINE('',#5348,#622);+#5355=ORIENTED_EDGE('',*,*,#5356,.T.);+#5356=EDGE_CURVE('',#5352,#5357,#5359,.T.);+#5357=VERTEX_POINT('',#5358);+#5358=CARTESIAN_POINT('',(-5.469682715053,5.075,0.182635182233));+#5359=CIRCLE('',#5360,0.1);+#5360=AXIS2_PLACEMENT_3D('',#5339,#2975,#2976);+#5361=ORIENTED_EDGE('',*,*,#5362,.T.);+#5362=EDGE_CURVE('',#5357,#5363,#5365,.T.);+#5363=VERTEX_POINT('',#5364);+#5364=CARTESIAN_POINT('',(-5.376961550602,5.075,0.734729635533));+#5365=LINE('',#5358,#2982);+#5366=ORIENTED_EDGE('',*,*,#5367,.T.);+#5367=EDGE_CURVE('',#5363,#5368,#5369,.T.);+#5368=VERTEX_POINT('',#5312);+#5369=CIRCLE('',#5370,0.2);+#5370=AXIS2_PLACEMENT_3D('',#5327,#2989,#2990);+#5371=ORIENTED_EDGE('',*,*,#5372,.T.);+#5372=EDGE_CURVE('',#5368,#1324,#5311,.T.);+#5373=PLANE('',#5374);+#5374=AXIS2_PLACEMENT_3D('',#5375,#685,#13);+#5375=CARTESIAN_POINT('',(-5.377811491544,5.075,0.447016202907));+#5376=ADVANCED_FACE('',(#5377),#5391,.F.);+#5377=FACE_BOUND('',#5378,.F.);+#5378=EDGE_LOOP('',(#5379,#5380,#5387,#5390));+#5379=ORIENTED_EDGE('',*,*,#1347,.T.);+#5380=ORIENTED_EDGE('',*,*,#5381,.T.);+#5381=EDGE_CURVE('',#1342,#5382,#5384,.T.);+#5382=VERTEX_POINT('',#5383);+#5383=CARTESIAN_POINT('',(-5.278480775301,5.325,0.717364817767));+#5384=CIRCLE('',#5385,1.E-01);+#5385=AXIS2_PLACEMENT_3D('',#5386,#2936,#2937);+#5386=CARTESIAN_POINT('',(-5.18,5.325,0.7));+#5387=ORIENTED_EDGE('',*,*,#5388,.F.);+#5388=EDGE_CURVE('',#5323,#5382,#5389,.T.);+#5389=LINE('',#5324,#684);+#5390=ORIENTED_EDGE('',*,*,#5322,.F.);+#5391=CYLINDRICAL_SURFACE('',#5326,1.E-01);+#5392=ADVANCED_FACE('',(#5393),#5442,.T.);+#5393=FACE_BOUND('',#5394,.T.);+#5394=EDGE_LOOP('',(#1354,#1340,#5380,#5395,#5400,#5407,#5412,#5417,#5422,#5428,#5433,#5439));+#5395=ORIENTED_EDGE('',*,*,#5396,.T.);+#5396=EDGE_CURVE('',#5382,#5397,#5399,.T.);+#5397=VERTEX_POINT('',#5398);+#5398=CARTESIAN_POINT('',(-5.371201939752,5.325,0.165270364467));+#5399=LINE('',#5383,#2943);+#5400=ORIENTED_EDGE('',*,*,#5401,.T.);+#5401=EDGE_CURVE('',#5397,#5402,#5404,.T.);+#5402=VERTEX_POINT('',#5403);+#5403=CARTESIAN_POINT('',(-5.568163490354,5.325,-1.387778780781E-16));+#5404=CIRCLE('',#5405,0.2);+#5405=AXIS2_PLACEMENT_3D('',#5406,#2952,#2953);+#5406=CARTESIAN_POINT('',(-5.568163490354,5.325,0.2));+#5407=ORIENTED_EDGE('',*,*,#5408,.T.);+#5408=EDGE_CURVE('',#5402,#5409,#5411,.T.);+#5409=VERTEX_POINT('',#5410);+#5410=CARTESIAN_POINT('',(-5.83,5.325,-1.387778780781E-16));+#5411=LINE('',#5403,#672);+#5412=ORIENTED_EDGE('',*,*,#5413,.T.);+#5413=EDGE_CURVE('',#5409,#5414,#5416,.T.);+#5414=VERTEX_POINT('',#5415);+#5415=CARTESIAN_POINT('',(-5.83,5.325,1.E-01));+#5416=LINE('',#5410,#658);+#5417=ORIENTED_EDGE('',*,*,#5418,.T.);+#5418=EDGE_CURVE('',#5414,#5419,#5421,.T.);+#5419=VERTEX_POINT('',#5420);+#5420=CARTESIAN_POINT('',(-5.568163490354,5.325,0.1));+#5421=LINE('',#5415,#622);+#5422=ORIENTED_EDGE('',*,*,#5423,.T.);+#5423=EDGE_CURVE('',#5419,#5424,#5426,.T.);+#5424=VERTEX_POINT('',#5425);+#5425=CARTESIAN_POINT('',(-5.469682715053,5.325,0.182635182233));+#5426=CIRCLE('',#5427,0.1);+#5427=AXIS2_PLACEMENT_3D('',#5406,#2975,#2976);+#5428=ORIENTED_EDGE('',*,*,#5429,.T.);+#5429=EDGE_CURVE('',#5424,#5430,#5432,.T.);+#5430=VERTEX_POINT('',#5431);+#5431=CARTESIAN_POINT('',(-5.376961550602,5.325,0.734729635533));+#5432=LINE('',#5425,#2982);+#5433=ORIENTED_EDGE('',*,*,#5434,.T.);+#5434=EDGE_CURVE('',#5430,#5435,#5437,.T.);+#5435=VERTEX_POINT('',#5436);+#5436=CARTESIAN_POINT('',(-5.18,5.325,0.9));+#5437=CIRCLE('',#5438,0.2);+#5438=AXIS2_PLACEMENT_3D('',#5386,#2989,#2990);+#5439=ORIENTED_EDGE('',*,*,#5440,.T.);+#5440=EDGE_CURVE('',#5435,#1356,#5441,.T.);+#5441=LINE('',#5436,#622);+#5442=PLANE('',#5443);+#5443=AXIS2_PLACEMENT_3D('',#5444,#685,#13);+#5444=CARTESIAN_POINT('',(-5.377811491544,5.325,0.447016202907));+#5445=ADVANCED_FACE('',(#5446),#628,.F.);+#5446=FACE_BOUND('',#5447,.F.);+#5447=EDGE_LOOP('',(#5448,#5449,#5453,#5454));+#5448=ORIENTED_EDGE('',*,*,#1368,.T.);+#5449=ORIENTED_EDGE('',*,*,#5450,.T.);+#5450=EDGE_CURVE('',#1363,#2601,#5451,.T.);+#5451=LINE('',#5452,#622);+#5452=CARTESIAN_POINT('',(-5.18,5.875,0.9));+#5453=ORIENTED_EDGE('',*,*,#2600,.F.);+#5454=ORIENTED_EDGE('',*,*,#5455,.F.);+#5455=EDGE_CURVE('',#1356,#2597,#5441,.T.);+#5456=ADVANCED_FACE('',(#5457),#5513,.F.);+#5457=FACE_BOUND('',#5458,.F.);+#5458=EDGE_LOOP('',(#5459,#5460,#5461,#5468,#5473,#5480,#5485,#5490,#5495,#5501,#5506,#5511));+#5459=ORIENTED_EDGE('',*,*,#1362,.F.);+#5460=ORIENTED_EDGE('',*,*,#1373,.T.);+#5461=ORIENTED_EDGE('',*,*,#5462,.T.);+#5462=EDGE_CURVE('',#1374,#5463,#5465,.T.);+#5463=VERTEX_POINT('',#5464);+#5464=CARTESIAN_POINT('',(-5.278480775301,5.875,0.717364817767));+#5465=CIRCLE('',#5466,1.E-01);+#5466=AXIS2_PLACEMENT_3D('',#5467,#2936,#2937);+#5467=CARTESIAN_POINT('',(-5.18,5.875,0.7));+#5468=ORIENTED_EDGE('',*,*,#5469,.T.);+#5469=EDGE_CURVE('',#5463,#5470,#5472,.T.);+#5470=VERTEX_POINT('',#5471);+#5471=CARTESIAN_POINT('',(-5.371201939752,5.875,0.165270364467));+#5472=LINE('',#5464,#2943);+#5473=ORIENTED_EDGE('',*,*,#5474,.T.);+#5474=EDGE_CURVE('',#5470,#5475,#5477,.T.);+#5475=VERTEX_POINT('',#5476);+#5476=CARTESIAN_POINT('',(-5.568163490354,5.875,-1.387778780781E-16));+#5477=CIRCLE('',#5478,0.2);+#5478=AXIS2_PLACEMENT_3D('',#5479,#2952,#2953);+#5479=CARTESIAN_POINT('',(-5.568163490354,5.875,0.2));+#5480=ORIENTED_EDGE('',*,*,#5481,.T.);+#5481=EDGE_CURVE('',#5475,#5482,#5484,.T.);+#5482=VERTEX_POINT('',#5483);+#5483=CARTESIAN_POINT('',(-5.83,5.875,-1.387778780781E-16));+#5484=LINE('',#5476,#672);+#5485=ORIENTED_EDGE('',*,*,#5486,.T.);+#5486=EDGE_CURVE('',#5482,#5487,#5489,.T.);+#5487=VERTEX_POINT('',#5488);+#5488=CARTESIAN_POINT('',(-5.83,5.875,1.E-01));+#5489=LINE('',#5483,#658);+#5490=ORIENTED_EDGE('',*,*,#5491,.T.);+#5491=EDGE_CURVE('',#5487,#5492,#5494,.T.);+#5492=VERTEX_POINT('',#5493);+#5493=CARTESIAN_POINT('',(-5.568163490354,5.875,0.1));+#5494=LINE('',#5488,#622);+#5495=ORIENTED_EDGE('',*,*,#5496,.T.);+#5496=EDGE_CURVE('',#5492,#5497,#5499,.T.);+#5497=VERTEX_POINT('',#5498);+#5498=CARTESIAN_POINT('',(-5.469682715053,5.875,0.182635182233));+#5499=CIRCLE('',#5500,0.1);+#5500=AXIS2_PLACEMENT_3D('',#5479,#2975,#2976);+#5501=ORIENTED_EDGE('',*,*,#5502,.T.);+#5502=EDGE_CURVE('',#5497,#5503,#5505,.T.);+#5503=VERTEX_POINT('',#5504);+#5504=CARTESIAN_POINT('',(-5.376961550602,5.875,0.734729635533));+#5505=LINE('',#5498,#2982);+#5506=ORIENTED_EDGE('',*,*,#5507,.T.);+#5507=EDGE_CURVE('',#5503,#5508,#5509,.T.);+#5508=VERTEX_POINT('',#5452);+#5509=CIRCLE('',#5510,0.2);+#5510=AXIS2_PLACEMENT_3D('',#5467,#2989,#2990);+#5511=ORIENTED_EDGE('',*,*,#5512,.T.);+#5512=EDGE_CURVE('',#5508,#1363,#5451,.T.);+#5513=PLANE('',#5514);+#5514=AXIS2_PLACEMENT_3D('',#5515,#685,#13);+#5515=CARTESIAN_POINT('',(-5.377811491544,5.875,0.447016202907));+#5516=ADVANCED_FACE('',(#5517),#5531,.F.);+#5517=FACE_BOUND('',#5518,.F.);+#5518=EDGE_LOOP('',(#5519,#5520,#5527,#5530));+#5519=ORIENTED_EDGE('',*,*,#1386,.T.);+#5520=ORIENTED_EDGE('',*,*,#5521,.T.);+#5521=EDGE_CURVE('',#1381,#5522,#5524,.T.);+#5522=VERTEX_POINT('',#5523);+#5523=CARTESIAN_POINT('',(-5.278480775301,6.125,0.717364817767));+#5524=CIRCLE('',#5525,1.E-01);+#5525=AXIS2_PLACEMENT_3D('',#5526,#2936,#2937);+#5526=CARTESIAN_POINT('',(-5.18,6.125,0.7));+#5527=ORIENTED_EDGE('',*,*,#5528,.F.);+#5528=EDGE_CURVE('',#5463,#5522,#5529,.T.);+#5529=LINE('',#5464,#684);+#5530=ORIENTED_EDGE('',*,*,#5462,.F.);+#5531=CYLINDRICAL_SURFACE('',#5466,1.E-01);+#5532=ADVANCED_FACE('',(#5533),#5582,.T.);+#5533=FACE_BOUND('',#5534,.T.);+#5534=EDGE_LOOP('',(#1393,#1379,#5520,#5535,#5540,#5547,#5552,#5557,#5562,#5568,#5573,#5579));+#5535=ORIENTED_EDGE('',*,*,#5536,.T.);+#5536=EDGE_CURVE('',#5522,#5537,#5539,.T.);+#5537=VERTEX_POINT('',#5538);+#5538=CARTESIAN_POINT('',(-5.371201939752,6.125,0.165270364467));+#5539=LINE('',#5523,#2943);+#5540=ORIENTED_EDGE('',*,*,#5541,.T.);+#5541=EDGE_CURVE('',#5537,#5542,#5544,.T.);+#5542=VERTEX_POINT('',#5543);+#5543=CARTESIAN_POINT('',(-5.568163490354,6.125,-1.387778780781E-16));+#5544=CIRCLE('',#5545,0.2);+#5545=AXIS2_PLACEMENT_3D('',#5546,#2952,#2953);+#5546=CARTESIAN_POINT('',(-5.568163490354,6.125,0.2));+#5547=ORIENTED_EDGE('',*,*,#5548,.T.);+#5548=EDGE_CURVE('',#5542,#5549,#5551,.T.);+#5549=VERTEX_POINT('',#5550);+#5550=CARTESIAN_POINT('',(-5.83,6.125,-1.387778780781E-16));+#5551=LINE('',#5543,#672);+#5552=ORIENTED_EDGE('',*,*,#5553,.T.);+#5553=EDGE_CURVE('',#5549,#5554,#5556,.T.);+#5554=VERTEX_POINT('',#5555);+#5555=CARTESIAN_POINT('',(-5.83,6.125,1.E-01));+#5556=LINE('',#5550,#658);+#5557=ORIENTED_EDGE('',*,*,#5558,.T.);+#5558=EDGE_CURVE('',#5554,#5559,#5561,.T.);+#5559=VERTEX_POINT('',#5560);+#5560=CARTESIAN_POINT('',(-5.568163490354,6.125,0.1));+#5561=LINE('',#5555,#622);+#5562=ORIENTED_EDGE('',*,*,#5563,.T.);+#5563=EDGE_CURVE('',#5559,#5564,#5566,.T.);+#5564=VERTEX_POINT('',#5565);+#5565=CARTESIAN_POINT('',(-5.469682715053,6.125,0.182635182233));+#5566=CIRCLE('',#5567,0.1);+#5567=AXIS2_PLACEMENT_3D('',#5546,#2975,#2976);+#5568=ORIENTED_EDGE('',*,*,#5569,.T.);+#5569=EDGE_CURVE('',#5564,#5570,#5572,.T.);+#5570=VERTEX_POINT('',#5571);+#5571=CARTESIAN_POINT('',(-5.376961550602,6.125,0.734729635533));+#5572=LINE('',#5565,#2982);+#5573=ORIENTED_EDGE('',*,*,#5574,.T.);+#5574=EDGE_CURVE('',#5570,#5575,#5577,.T.);+#5575=VERTEX_POINT('',#5576);+#5576=CARTESIAN_POINT('',(-5.18,6.125,0.9));+#5577=CIRCLE('',#5578,0.2);+#5578=AXIS2_PLACEMENT_3D('',#5526,#2989,#2990);+#5579=ORIENTED_EDGE('',*,*,#5580,.T.);+#5580=EDGE_CURVE('',#5575,#1395,#5581,.T.);+#5581=LINE('',#5576,#622);+#5582=PLANE('',#5583);+#5583=AXIS2_PLACEMENT_3D('',#5584,#685,#13);+#5584=CARTESIAN_POINT('',(-5.377811491544,6.125,0.447016202907));+#5585=ADVANCED_FACE('',(#5586),#628,.F.);+#5586=FACE_BOUND('',#5587,.F.);+#5587=EDGE_LOOP('',(#5588,#5589,#5593,#5594));+#5588=ORIENTED_EDGE('',*,*,#1407,.T.);+#5589=ORIENTED_EDGE('',*,*,#5590,.T.);+#5590=EDGE_CURVE('',#1402,#2609,#5591,.T.);+#5591=LINE('',#5592,#622);+#5592=CARTESIAN_POINT('',(-5.18,6.675,0.9));+#5593=ORIENTED_EDGE('',*,*,#2608,.F.);+#5594=ORIENTED_EDGE('',*,*,#5595,.F.);+#5595=EDGE_CURVE('',#1395,#2605,#5581,.T.);+#5596=ADVANCED_FACE('',(#5597),#5653,.F.);+#5597=FACE_BOUND('',#5598,.F.);+#5598=EDGE_LOOP('',(#5599,#5600,#5601,#5608,#5613,#5620,#5625,#5630,#5635,#5641,#5646,#5651));+#5599=ORIENTED_EDGE('',*,*,#1401,.F.);+#5600=ORIENTED_EDGE('',*,*,#1412,.T.);+#5601=ORIENTED_EDGE('',*,*,#5602,.T.);+#5602=EDGE_CURVE('',#1413,#5603,#5605,.T.);+#5603=VERTEX_POINT('',#5604);+#5604=CARTESIAN_POINT('',(-5.278480775301,6.675,0.717364817767));+#5605=CIRCLE('',#5606,1.E-01);+#5606=AXIS2_PLACEMENT_3D('',#5607,#2936,#2937);+#5607=CARTESIAN_POINT('',(-5.18,6.675,0.7));+#5608=ORIENTED_EDGE('',*,*,#5609,.T.);+#5609=EDGE_CURVE('',#5603,#5610,#5612,.T.);+#5610=VERTEX_POINT('',#5611);+#5611=CARTESIAN_POINT('',(-5.371201939752,6.675,0.165270364467));+#5612=LINE('',#5604,#2943);+#5613=ORIENTED_EDGE('',*,*,#5614,.T.);+#5614=EDGE_CURVE('',#5610,#5615,#5617,.T.);+#5615=VERTEX_POINT('',#5616);+#5616=CARTESIAN_POINT('',(-5.568163490354,6.675,-1.387778780781E-16));+#5617=CIRCLE('',#5618,0.2);+#5618=AXIS2_PLACEMENT_3D('',#5619,#2952,#2953);+#5619=CARTESIAN_POINT('',(-5.568163490354,6.675,0.2));+#5620=ORIENTED_EDGE('',*,*,#5621,.T.);+#5621=EDGE_CURVE('',#5615,#5622,#5624,.T.);+#5622=VERTEX_POINT('',#5623);+#5623=CARTESIAN_POINT('',(-5.83,6.675,-1.387778780781E-16));+#5624=LINE('',#5616,#672);+#5625=ORIENTED_EDGE('',*,*,#5626,.T.);+#5626=EDGE_CURVE('',#5622,#5627,#5629,.T.);+#5627=VERTEX_POINT('',#5628);+#5628=CARTESIAN_POINT('',(-5.83,6.675,1.E-01));+#5629=LINE('',#5623,#658);+#5630=ORIENTED_EDGE('',*,*,#5631,.T.);+#5631=EDGE_CURVE('',#5627,#5632,#5634,.T.);+#5632=VERTEX_POINT('',#5633);+#5633=CARTESIAN_POINT('',(-5.568163490354,6.675,0.1));+#5634=LINE('',#5628,#622);+#5635=ORIENTED_EDGE('',*,*,#5636,.T.);+#5636=EDGE_CURVE('',#5632,#5637,#5639,.T.);+#5637=VERTEX_POINT('',#5638);+#5638=CARTESIAN_POINT('',(-5.469682715053,6.675,0.182635182233));+#5639=CIRCLE('',#5640,0.1);+#5640=AXIS2_PLACEMENT_3D('',#5619,#2975,#2976);+#5641=ORIENTED_EDGE('',*,*,#5642,.T.);+#5642=EDGE_CURVE('',#5637,#5643,#5645,.T.);+#5643=VERTEX_POINT('',#5644);+#5644=CARTESIAN_POINT('',(-5.376961550602,6.675,0.734729635533));+#5645=LINE('',#5638,#2982);+#5646=ORIENTED_EDGE('',*,*,#5647,.T.);+#5647=EDGE_CURVE('',#5643,#5648,#5649,.T.);+#5648=VERTEX_POINT('',#5592);+#5649=CIRCLE('',#5650,0.2);+#5650=AXIS2_PLACEMENT_3D('',#5607,#2989,#2990);+#5651=ORIENTED_EDGE('',*,*,#5652,.T.);+#5652=EDGE_CURVE('',#5648,#1402,#5591,.T.);+#5653=PLANE('',#5654);+#5654=AXIS2_PLACEMENT_3D('',#5655,#685,#13);+#5655=CARTESIAN_POINT('',(-5.377811491544,6.675,0.447016202907));+#5656=ADVANCED_FACE('',(#5657),#5671,.F.);+#5657=FACE_BOUND('',#5658,.F.);+#5658=EDGE_LOOP('',(#5659,#5660,#5667,#5670));+#5659=ORIENTED_EDGE('',*,*,#1425,.T.);+#5660=ORIENTED_EDGE('',*,*,#5661,.T.);+#5661=EDGE_CURVE('',#1420,#5662,#5664,.T.);+#5662=VERTEX_POINT('',#5663);+#5663=CARTESIAN_POINT('',(-5.278480775301,6.925,0.717364817767));+#5664=CIRCLE('',#5665,1.E-01);+#5665=AXIS2_PLACEMENT_3D('',#5666,#2936,#2937);+#5666=CARTESIAN_POINT('',(-5.18,6.925,0.7));+#5667=ORIENTED_EDGE('',*,*,#5668,.F.);+#5668=EDGE_CURVE('',#5603,#5662,#5669,.T.);+#5669=LINE('',#5604,#684);+#5670=ORIENTED_EDGE('',*,*,#5602,.F.);+#5671=CYLINDRICAL_SURFACE('',#5606,1.E-01);+#5672=ADVANCED_FACE('',(#5673),#5722,.T.);+#5673=FACE_BOUND('',#5674,.T.);+#5674=EDGE_LOOP('',(#1432,#1418,#5660,#5675,#5680,#5687,#5692,#5697,#5702,#5708,#5713,#5719));+#5675=ORIENTED_EDGE('',*,*,#5676,.T.);+#5676=EDGE_CURVE('',#5662,#5677,#5679,.T.);+#5677=VERTEX_POINT('',#5678);+#5678=CARTESIAN_POINT('',(-5.371201939752,6.925,0.165270364467));+#5679=LINE('',#5663,#2943);+#5680=ORIENTED_EDGE('',*,*,#5681,.T.);+#5681=EDGE_CURVE('',#5677,#5682,#5684,.T.);+#5682=VERTEX_POINT('',#5683);+#5683=CARTESIAN_POINT('',(-5.568163490354,6.925,-1.387778780781E-16));+#5684=CIRCLE('',#5685,0.2);+#5685=AXIS2_PLACEMENT_3D('',#5686,#2952,#2953);+#5686=CARTESIAN_POINT('',(-5.568163490354,6.925,0.2));+#5687=ORIENTED_EDGE('',*,*,#5688,.T.);+#5688=EDGE_CURVE('',#5682,#5689,#5691,.T.);+#5689=VERTEX_POINT('',#5690);+#5690=CARTESIAN_POINT('',(-5.83,6.925,-1.387778780781E-16));+#5691=LINE('',#5683,#672);+#5692=ORIENTED_EDGE('',*,*,#5693,.T.);+#5693=EDGE_CURVE('',#5689,#5694,#5696,.T.);+#5694=VERTEX_POINT('',#5695);+#5695=CARTESIAN_POINT('',(-5.83,6.925,1.E-01));+#5696=LINE('',#5690,#658);+#5697=ORIENTED_EDGE('',*,*,#5698,.T.);+#5698=EDGE_CURVE('',#5694,#5699,#5701,.T.);+#5699=VERTEX_POINT('',#5700);+#5700=CARTESIAN_POINT('',(-5.568163490354,6.925,0.1));+#5701=LINE('',#5695,#622);+#5702=ORIENTED_EDGE('',*,*,#5703,.T.);+#5703=EDGE_CURVE('',#5699,#5704,#5706,.T.);+#5704=VERTEX_POINT('',#5705);+#5705=CARTESIAN_POINT('',(-5.469682715053,6.925,0.182635182233));+#5706=CIRCLE('',#5707,0.1);+#5707=AXIS2_PLACEMENT_3D('',#5686,#2975,#2976);+#5708=ORIENTED_EDGE('',*,*,#5709,.T.);+#5709=EDGE_CURVE('',#5704,#5710,#5712,.T.);+#5710=VERTEX_POINT('',#5711);+#5711=CARTESIAN_POINT('',(-5.376961550602,6.925,0.734729635533));+#5712=LINE('',#5705,#2982);+#5713=ORIENTED_EDGE('',*,*,#5714,.T.);+#5714=EDGE_CURVE('',#5710,#5715,#5717,.T.);+#5715=VERTEX_POINT('',#5716);+#5716=CARTESIAN_POINT('',(-5.18,6.925,0.9));+#5717=CIRCLE('',#5718,0.2);+#5718=AXIS2_PLACEMENT_3D('',#5666,#2989,#2990);+#5719=ORIENTED_EDGE('',*,*,#5720,.T.);+#5720=EDGE_CURVE('',#5715,#1434,#5721,.T.);+#5721=LINE('',#5716,#622);+#5722=PLANE('',#5723);+#5723=AXIS2_PLACEMENT_3D('',#5724,#685,#13);+#5724=CARTESIAN_POINT('',(-5.377811491544,6.925,0.447016202907));+#5725=ADVANCED_FACE('',(#5726),#628,.F.);+#5726=FACE_BOUND('',#5727,.F.);+#5727=EDGE_LOOP('',(#5728,#5729,#5733,#5734));+#5728=ORIENTED_EDGE('',*,*,#1446,.T.);+#5729=ORIENTED_EDGE('',*,*,#5730,.T.);+#5730=EDGE_CURVE('',#1441,#2617,#5731,.T.);+#5731=LINE('',#5732,#622);+#5732=CARTESIAN_POINT('',(-5.18,7.475,0.9));+#5733=ORIENTED_EDGE('',*,*,#2616,.F.);+#5734=ORIENTED_EDGE('',*,*,#5735,.F.);+#5735=EDGE_CURVE('',#1434,#2613,#5721,.T.);+#5736=ADVANCED_FACE('',(#5737),#5793,.F.);+#5737=FACE_BOUND('',#5738,.F.);+#5738=EDGE_LOOP('',(#5739,#5740,#5741,#5748,#5753,#5760,#5765,#5770,#5775,#5781,#5786,#5791));+#5739=ORIENTED_EDGE('',*,*,#1440,.F.);+#5740=ORIENTED_EDGE('',*,*,#1451,.T.);+#5741=ORIENTED_EDGE('',*,*,#5742,.T.);+#5742=EDGE_CURVE('',#1452,#5743,#5745,.T.);+#5743=VERTEX_POINT('',#5744);+#5744=CARTESIAN_POINT('',(-5.278480775301,7.475,0.717364817767));+#5745=CIRCLE('',#5746,1.E-01);+#5746=AXIS2_PLACEMENT_3D('',#5747,#2936,#2937);+#5747=CARTESIAN_POINT('',(-5.18,7.475,0.7));+#5748=ORIENTED_EDGE('',*,*,#5749,.T.);+#5749=EDGE_CURVE('',#5743,#5750,#5752,.T.);+#5750=VERTEX_POINT('',#5751);+#5751=CARTESIAN_POINT('',(-5.371201939752,7.475,0.165270364467));+#5752=LINE('',#5744,#2943);+#5753=ORIENTED_EDGE('',*,*,#5754,.T.);+#5754=EDGE_CURVE('',#5750,#5755,#5757,.T.);+#5755=VERTEX_POINT('',#5756);+#5756=CARTESIAN_POINT('',(-5.568163490354,7.475,-1.387778780781E-16));+#5757=CIRCLE('',#5758,0.2);+#5758=AXIS2_PLACEMENT_3D('',#5759,#2952,#2953);+#5759=CARTESIAN_POINT('',(-5.568163490354,7.475,0.2));+#5760=ORIENTED_EDGE('',*,*,#5761,.T.);+#5761=EDGE_CURVE('',#5755,#5762,#5764,.T.);+#5762=VERTEX_POINT('',#5763);+#5763=CARTESIAN_POINT('',(-5.83,7.475,-1.387778780781E-16));+#5764=LINE('',#5756,#672);+#5765=ORIENTED_EDGE('',*,*,#5766,.T.);+#5766=EDGE_CURVE('',#5762,#5767,#5769,.T.);+#5767=VERTEX_POINT('',#5768);+#5768=CARTESIAN_POINT('',(-5.83,7.475,1.E-01));+#5769=LINE('',#5763,#658);+#5770=ORIENTED_EDGE('',*,*,#5771,.T.);+#5771=EDGE_CURVE('',#5767,#5772,#5774,.T.);+#5772=VERTEX_POINT('',#5773);+#5773=CARTESIAN_POINT('',(-5.568163490354,7.475,0.1));+#5774=LINE('',#5768,#622);+#5775=ORIENTED_EDGE('',*,*,#5776,.T.);+#5776=EDGE_CURVE('',#5772,#5777,#5779,.T.);+#5777=VERTEX_POINT('',#5778);+#5778=CARTESIAN_POINT('',(-5.469682715053,7.475,0.182635182233));+#5779=CIRCLE('',#5780,0.1);+#5780=AXIS2_PLACEMENT_3D('',#5759,#2975,#2976);+#5781=ORIENTED_EDGE('',*,*,#5782,.T.);+#5782=EDGE_CURVE('',#5777,#5783,#5785,.T.);+#5783=VERTEX_POINT('',#5784);+#5784=CARTESIAN_POINT('',(-5.376961550602,7.475,0.734729635533));+#5785=LINE('',#5778,#2982);+#5786=ORIENTED_EDGE('',*,*,#5787,.T.);+#5787=EDGE_CURVE('',#5783,#5788,#5789,.T.);+#5788=VERTEX_POINT('',#5732);+#5789=CIRCLE('',#5790,0.2);+#5790=AXIS2_PLACEMENT_3D('',#5747,#2989,#2990);+#5791=ORIENTED_EDGE('',*,*,#5792,.T.);+#5792=EDGE_CURVE('',#5788,#1441,#5731,.T.);+#5793=PLANE('',#5794);+#5794=AXIS2_PLACEMENT_3D('',#5795,#685,#13);+#5795=CARTESIAN_POINT('',(-5.377811491544,7.475,0.447016202907));+#5796=ADVANCED_FACE('',(#5797),#5811,.F.);+#5797=FACE_BOUND('',#5798,.F.);+#5798=EDGE_LOOP('',(#5799,#5800,#5807,#5810));+#5799=ORIENTED_EDGE('',*,*,#1464,.T.);+#5800=ORIENTED_EDGE('',*,*,#5801,.T.);+#5801=EDGE_CURVE('',#1459,#5802,#5804,.T.);+#5802=VERTEX_POINT('',#5803);+#5803=CARTESIAN_POINT('',(-5.278480775301,7.725,0.717364817767));+#5804=CIRCLE('',#5805,1.E-01);+#5805=AXIS2_PLACEMENT_3D('',#5806,#2936,#2937);+#5806=CARTESIAN_POINT('',(-5.18,7.725,0.7));+#5807=ORIENTED_EDGE('',*,*,#5808,.F.);+#5808=EDGE_CURVE('',#5743,#5802,#5809,.T.);+#5809=LINE('',#5744,#684);+#5810=ORIENTED_EDGE('',*,*,#5742,.F.);+#5811=CYLINDRICAL_SURFACE('',#5746,1.E-01);+#5812=ADVANCED_FACE('',(#5813),#5862,.T.);+#5813=FACE_BOUND('',#5814,.T.);+#5814=EDGE_LOOP('',(#1471,#1457,#5800,#5815,#5820,#5827,#5832,#5837,#5842,#5848,#5853,#5859));+#5815=ORIENTED_EDGE('',*,*,#5816,.T.);+#5816=EDGE_CURVE('',#5802,#5817,#5819,.T.);+#5817=VERTEX_POINT('',#5818);+#5818=CARTESIAN_POINT('',(-5.371201939752,7.725,0.165270364467));+#5819=LINE('',#5803,#2943);+#5820=ORIENTED_EDGE('',*,*,#5821,.T.);+#5821=EDGE_CURVE('',#5817,#5822,#5824,.T.);+#5822=VERTEX_POINT('',#5823);+#5823=CARTESIAN_POINT('',(-5.568163490354,7.725,-1.387778780781E-16));+#5824=CIRCLE('',#5825,0.2);+#5825=AXIS2_PLACEMENT_3D('',#5826,#2952,#2953);+#5826=CARTESIAN_POINT('',(-5.568163490354,7.725,0.2));+#5827=ORIENTED_EDGE('',*,*,#5828,.T.);+#5828=EDGE_CURVE('',#5822,#5829,#5831,.T.);+#5829=VERTEX_POINT('',#5830);+#5830=CARTESIAN_POINT('',(-5.83,7.725,-1.387778780781E-16));+#5831=LINE('',#5823,#672);+#5832=ORIENTED_EDGE('',*,*,#5833,.T.);+#5833=EDGE_CURVE('',#5829,#5834,#5836,.T.);+#5834=VERTEX_POINT('',#5835);+#5835=CARTESIAN_POINT('',(-5.83,7.725,1.E-01));+#5836=LINE('',#5830,#658);+#5837=ORIENTED_EDGE('',*,*,#5838,.T.);+#5838=EDGE_CURVE('',#5834,#5839,#5841,.T.);+#5839=VERTEX_POINT('',#5840);+#5840=CARTESIAN_POINT('',(-5.568163490354,7.725,0.1));+#5841=LINE('',#5835,#622);+#5842=ORIENTED_EDGE('',*,*,#5843,.T.);+#5843=EDGE_CURVE('',#5839,#5844,#5846,.T.);+#5844=VERTEX_POINT('',#5845);+#5845=CARTESIAN_POINT('',(-5.469682715053,7.725,0.182635182233));+#5846=CIRCLE('',#5847,0.1);+#5847=AXIS2_PLACEMENT_3D('',#5826,#2975,#2976);+#5848=ORIENTED_EDGE('',*,*,#5849,.T.);+#5849=EDGE_CURVE('',#5844,#5850,#5852,.T.);+#5850=VERTEX_POINT('',#5851);+#5851=CARTESIAN_POINT('',(-5.376961550602,7.725,0.734729635533));+#5852=LINE('',#5845,#2982);+#5853=ORIENTED_EDGE('',*,*,#5854,.T.);+#5854=EDGE_CURVE('',#5850,#5855,#5857,.T.);+#5855=VERTEX_POINT('',#5856);+#5856=CARTESIAN_POINT('',(-5.18,7.725,0.9));+#5857=CIRCLE('',#5858,0.2);+#5858=AXIS2_PLACEMENT_3D('',#5806,#2989,#2990);+#5859=ORIENTED_EDGE('',*,*,#5860,.T.);+#5860=EDGE_CURVE('',#5855,#1473,#5861,.T.);+#5861=LINE('',#5856,#622);+#5862=PLANE('',#5863);+#5863=AXIS2_PLACEMENT_3D('',#5864,#685,#13);+#5864=CARTESIAN_POINT('',(-5.377811491544,7.725,0.447016202907));+#5865=ADVANCED_FACE('',(#5866),#628,.F.);+#5866=FACE_BOUND('',#5867,.F.);+#5867=EDGE_LOOP('',(#5868,#5869,#5870,#5871));+#5868=ORIENTED_EDGE('',*,*,#1485,.T.);+#5869=ORIENTED_EDGE('',*,*,#2447,.T.);+#5870=ORIENTED_EDGE('',*,*,#2624,.F.);+#5871=ORIENTED_EDGE('',*,*,#5872,.F.);+#5872=EDGE_CURVE('',#1473,#2621,#5861,.T.);+#5873=ADVANCED_FACE('',(#5874),#5928,.F.);+#5874=FACE_BOUND('',#5875,.F.);+#5875=EDGE_LOOP('',(#5876,#5877,#5878,#5885,#5890,#5897,#5902,#5907,#5912,#5918,#5923,#5927));+#5876=ORIENTED_EDGE('',*,*,#1479,.F.);+#5877=ORIENTED_EDGE('',*,*,#1490,.T.);+#5878=ORIENTED_EDGE('',*,*,#5879,.T.);+#5879=EDGE_CURVE('',#1491,#5880,#5882,.T.);+#5880=VERTEX_POINT('',#5881);+#5881=CARTESIAN_POINT('',(-5.278480775301,8.275,0.717364817767));+#5882=CIRCLE('',#5883,1.E-01);+#5883=AXIS2_PLACEMENT_3D('',#5884,#2936,#2937);+#5884=CARTESIAN_POINT('',(-5.18,8.275,0.7));+#5885=ORIENTED_EDGE('',*,*,#5886,.T.);+#5886=EDGE_CURVE('',#5880,#5887,#5889,.T.);+#5887=VERTEX_POINT('',#5888);+#5888=CARTESIAN_POINT('',(-5.371201939752,8.275,0.165270364467));+#5889=LINE('',#5881,#2943);+#5890=ORIENTED_EDGE('',*,*,#5891,.T.);+#5891=EDGE_CURVE('',#5887,#5892,#5894,.T.);+#5892=VERTEX_POINT('',#5893);+#5893=CARTESIAN_POINT('',(-5.568163490354,8.275,-1.387778780781E-16));+#5894=CIRCLE('',#5895,0.2);+#5895=AXIS2_PLACEMENT_3D('',#5896,#2952,#2953);+#5896=CARTESIAN_POINT('',(-5.568163490354,8.275,0.2));+#5897=ORIENTED_EDGE('',*,*,#5898,.T.);+#5898=EDGE_CURVE('',#5892,#5899,#5901,.T.);+#5899=VERTEX_POINT('',#5900);+#5900=CARTESIAN_POINT('',(-5.83,8.275,-1.387778780781E-16));+#5901=LINE('',#5893,#672);+#5902=ORIENTED_EDGE('',*,*,#5903,.T.);+#5903=EDGE_CURVE('',#5899,#5904,#5906,.T.);+#5904=VERTEX_POINT('',#5905);+#5905=CARTESIAN_POINT('',(-5.83,8.275,1.E-01));+#5906=LINE('',#5900,#658);+#5907=ORIENTED_EDGE('',*,*,#5908,.T.);+#5908=EDGE_CURVE('',#5904,#5909,#5911,.T.);+#5909=VERTEX_POINT('',#5910);+#5910=CARTESIAN_POINT('',(-5.568163490354,8.275,0.1));+#5911=LINE('',#5905,#622);+#5912=ORIENTED_EDGE('',*,*,#5913,.T.);+#5913=EDGE_CURVE('',#5909,#5914,#5916,.T.);+#5914=VERTEX_POINT('',#5915);+#5915=CARTESIAN_POINT('',(-5.469682715053,8.275,0.182635182233));+#5916=CIRCLE('',#5917,0.1);+#5917=AXIS2_PLACEMENT_3D('',#5896,#2975,#2976);+#5918=ORIENTED_EDGE('',*,*,#5919,.T.);+#5919=EDGE_CURVE('',#5914,#5920,#5922,.T.);+#5920=VERTEX_POINT('',#5921);+#5921=CARTESIAN_POINT('',(-5.376961550602,8.275,0.734729635533));+#5922=LINE('',#5915,#2982);+#5923=ORIENTED_EDGE('',*,*,#5924,.T.);+#5924=EDGE_CURVE('',#5920,#2432,#5925,.T.);+#5925=CIRCLE('',#5926,0.2);+#5926=AXIS2_PLACEMENT_3D('',#5884,#2989,#2990);+#5927=ORIENTED_EDGE('',*,*,#2431,.T.);+#5928=PLANE('',#5929);+#5929=AXIS2_PLACEMENT_3D('',#5930,#685,#13);+#5930=CARTESIAN_POINT('',(-5.377811491544,8.275,0.447016202907));+#5931=ADVANCED_FACE('',(#5932),#5946,.F.);+#5932=FACE_BOUND('',#5933,.F.);+#5933=EDGE_LOOP('',(#5934,#5935,#5942,#5945));+#5934=ORIENTED_EDGE('',*,*,#1503,.T.);+#5935=ORIENTED_EDGE('',*,*,#5936,.T.);+#5936=EDGE_CURVE('',#1498,#5937,#5939,.T.);+#5937=VERTEX_POINT('',#5938);+#5938=CARTESIAN_POINT('',(-5.278480775301,8.525,0.717364817767));+#5939=CIRCLE('',#5940,1.E-01);+#5940=AXIS2_PLACEMENT_3D('',#5941,#2936,#2937);+#5941=CARTESIAN_POINT('',(-5.18,8.525,0.7));+#5942=ORIENTED_EDGE('',*,*,#5943,.F.);+#5943=EDGE_CURVE('',#5880,#5937,#5944,.T.);+#5944=LINE('',#5881,#684);+#5945=ORIENTED_EDGE('',*,*,#5879,.F.);+#5946=CYLINDRICAL_SURFACE('',#5883,1.E-01);+#5947=ADVANCED_FACE('',(#5948),#5992,.T.);+#5948=FACE_BOUND('',#5949,.T.);+#5949=EDGE_LOOP('',(#1510,#1496,#5935,#5950,#5955,#5962,#5967,#5972,#5977,#5983,#5988,#2439));+#5950=ORIENTED_EDGE('',*,*,#5951,.T.);+#5951=EDGE_CURVE('',#5937,#5952,#5954,.T.);+#5952=VERTEX_POINT('',#5953);+#5953=CARTESIAN_POINT('',(-5.371201939752,8.525,0.165270364467));+#5954=LINE('',#5938,#2943);+#5955=ORIENTED_EDGE('',*,*,#5956,.T.);+#5956=EDGE_CURVE('',#5952,#5957,#5959,.T.);+#5957=VERTEX_POINT('',#5958);+#5958=CARTESIAN_POINT('',(-5.568163490354,8.525,-1.387778780781E-16));+#5959=CIRCLE('',#5960,0.2);+#5960=AXIS2_PLACEMENT_3D('',#5961,#2952,#2953);+#5961=CARTESIAN_POINT('',(-5.568163490354,8.525,0.2));+#5962=ORIENTED_EDGE('',*,*,#5963,.T.);+#5963=EDGE_CURVE('',#5957,#5964,#5966,.T.);+#5964=VERTEX_POINT('',#5965);+#5965=CARTESIAN_POINT('',(-5.83,8.525,-1.387778780781E-16));+#5966=LINE('',#5958,#672);+#5967=ORIENTED_EDGE('',*,*,#5968,.T.);+#5968=EDGE_CURVE('',#5964,#5969,#5971,.T.);+#5969=VERTEX_POINT('',#5970);+#5970=CARTESIAN_POINT('',(-5.83,8.525,1.E-01));+#5971=LINE('',#5965,#658);+#5972=ORIENTED_EDGE('',*,*,#5973,.T.);+#5973=EDGE_CURVE('',#5969,#5974,#5976,.T.);+#5974=VERTEX_POINT('',#5975);+#5975=CARTESIAN_POINT('',(-5.568163490354,8.525,0.1));+#5976=LINE('',#5970,#622);+#5977=ORIENTED_EDGE('',*,*,#5978,.T.);+#5978=EDGE_CURVE('',#5974,#5979,#5981,.T.);+#5979=VERTEX_POINT('',#5980);+#5980=CARTESIAN_POINT('',(-5.469682715053,8.525,0.182635182233));+#5981=CIRCLE('',#5982,0.1);+#5982=AXIS2_PLACEMENT_3D('',#5961,#2975,#2976);+#5983=ORIENTED_EDGE('',*,*,#5984,.T.);+#5984=EDGE_CURVE('',#5979,#5985,#5987,.T.);+#5985=VERTEX_POINT('',#5986);+#5986=CARTESIAN_POINT('',(-5.376961550602,8.525,0.734729635533));+#5987=LINE('',#5980,#2982);+#5988=ORIENTED_EDGE('',*,*,#5989,.T.);+#5989=EDGE_CURVE('',#5985,#2437,#5990,.T.);+#5990=CIRCLE('',#5991,0.2);+#5991=AXIS2_PLACEMENT_3D('',#5941,#2989,#2990);+#5992=PLANE('',#5993);+#5993=AXIS2_PLACEMENT_3D('',#5994,#685,#13);+#5994=CARTESIAN_POINT('',(-5.377811491544,8.525,0.447016202907));+#5995=ADVANCED_FACE('',(#5996),#6058,.F.);+#5996=FACE_BOUND('',#5997,.F.);+#5997=EDGE_LOOP('',(#5998,#5999,#6000,#6008,#6015,#6023,#6028,#6033,#6038,#6045,#6052,#6057));+#5998=ORIENTED_EDGE('',*,*,#1523,.F.);+#5999=ORIENTED_EDGE('',*,*,#1533,.T.);+#6000=ORIENTED_EDGE('',*,*,#6001,.T.);+#6001=EDGE_CURVE('',#1534,#6002,#6004,.T.);+#6002=VERTEX_POINT('',#6003);+#6003=CARTESIAN_POINT('',(5.278480775301,8.525,0.717364817767));+#6004=CIRCLE('',#6005,1.E-01);+#6005=AXIS2_PLACEMENT_3D('',#6006,#87,#6007);+#6006=CARTESIAN_POINT('',(5.18,8.525,0.7));+#6007=DIRECTION('',(-8.881784197001E-15,-9.860761315263E-31,1.));+#6008=ORIENTED_EDGE('',*,*,#6009,.T.);+#6009=EDGE_CURVE('',#6002,#6010,#6012,.T.);+#6010=VERTEX_POINT('',#6011);+#6011=CARTESIAN_POINT('',(5.371201939752,8.525,0.165270364467));+#6012=LINE('',#6003,#6013);+#6013=VECTOR('',#6014,1.);+#6014=DIRECTION('',(0.165624877661,1.838805526304E-17,-0.986188825682));+#6015=ORIENTED_EDGE('',*,*,#6016,.T.);+#6016=EDGE_CURVE('',#6010,#6017,#6019,.T.);+#6017=VERTEX_POINT('',#6018);+#6018=CARTESIAN_POINT('',(5.568163490354,8.525,-1.387778780781E-16));+#6019=CIRCLE('',#6020,0.2);+#6020=AXIS2_PLACEMENT_3D('',#6021,#59,#6022);+#6021=CARTESIAN_POINT('',(5.568163490354,8.525,0.2));+#6022=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#6023=ORIENTED_EDGE('',*,*,#6024,.T.);+#6024=EDGE_CURVE('',#6017,#6025,#6027,.T.);+#6025=VERTEX_POINT('',#6026);+#6026=CARTESIAN_POINT('',(5.83,8.525,-1.387778780781E-16));+#6027=LINE('',#6018,#27);+#6028=ORIENTED_EDGE('',*,*,#6029,.T.);+#6029=EDGE_CURVE('',#6025,#6030,#6032,.T.);+#6030=VERTEX_POINT('',#6031);+#6031=CARTESIAN_POINT('',(5.83,8.525,1.E-01));+#6032=LINE('',#6026,#658);+#6033=ORIENTED_EDGE('',*,*,#6034,.T.);+#6034=EDGE_CURVE('',#6030,#6035,#6037,.T.);+#6035=VERTEX_POINT('',#6036);+#6036=CARTESIAN_POINT('',(5.568163490354,8.525,0.1));+#6037=LINE('',#6031,#72);+#6038=ORIENTED_EDGE('',*,*,#6039,.T.);+#6039=EDGE_CURVE('',#6035,#6040,#6042,.T.);+#6040=VERTEX_POINT('',#6041);+#6041=CARTESIAN_POINT('',(5.469682715053,8.525,0.182635182233));+#6042=CIRCLE('',#6043,0.1);+#6043=AXIS2_PLACEMENT_3D('',#6021,#87,#6044);+#6044=DIRECTION('',(-8.881784197001E-15,-9.860761315263E-31,-1.));+#6045=ORIENTED_EDGE('',*,*,#6046,.T.);+#6046=EDGE_CURVE('',#6040,#6047,#6049,.T.);+#6047=VERTEX_POINT('',#6048);+#6048=CARTESIAN_POINT('',(5.376961550602,8.525,0.734729635533));+#6049=LINE('',#6041,#6050);+#6050=VECTOR('',#6051,1.);+#6051=DIRECTION('',(-0.165624877661,-1.838805526304E-17,0.986188825682));+#6052=ORIENTED_EDGE('',*,*,#6053,.T.);+#6053=EDGE_CURVE('',#6047,#2878,#6054,.T.);+#6054=CIRCLE('',#6055,0.2);+#6055=AXIS2_PLACEMENT_3D('',#6006,#59,#6056);+#6056=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#6057=ORIENTED_EDGE('',*,*,#2877,.T.);+#6058=PLANE('',#6059);+#6059=AXIS2_PLACEMENT_3D('',#6060,#59,#13);+#6060=CARTESIAN_POINT('',(5.377811491544,8.525,0.447016202907));+#6061=ADVANCED_FACE('',(#6062),#6076,.F.);+#6062=FACE_BOUND('',#6063,.F.);+#6063=EDGE_LOOP('',(#6064,#6065,#6072,#6075));+#6064=ORIENTED_EDGE('',*,*,#1546,.T.);+#6065=ORIENTED_EDGE('',*,*,#6066,.T.);+#6066=EDGE_CURVE('',#1541,#6067,#6069,.T.);+#6067=VERTEX_POINT('',#6068);+#6068=CARTESIAN_POINT('',(5.278480775301,8.275,0.717364817767));+#6069=CIRCLE('',#6070,1.E-01);+#6070=AXIS2_PLACEMENT_3D('',#6071,#87,#6007);+#6071=CARTESIAN_POINT('',(5.18,8.275,0.7));+#6072=ORIENTED_EDGE('',*,*,#6073,.F.);+#6073=EDGE_CURVE('',#6002,#6067,#6074,.T.);+#6074=LINE('',#6003,#58);+#6075=ORIENTED_EDGE('',*,*,#6001,.F.);+#6076=CYLINDRICAL_SURFACE('',#6005,1.E-01);+#6077=ADVANCED_FACE('',(#6078),#6122,.T.);+#6078=FACE_BOUND('',#6079,.T.);+#6079=EDGE_LOOP('',(#1553,#1539,#6065,#6080,#6085,#6092,#6097,#6102,#6107,#6113,#6118,#2884));+#6080=ORIENTED_EDGE('',*,*,#6081,.T.);+#6081=EDGE_CURVE('',#6067,#6082,#6084,.T.);+#6082=VERTEX_POINT('',#6083);+#6083=CARTESIAN_POINT('',(5.371201939752,8.275,0.165270364467));+#6084=LINE('',#6068,#6013);+#6085=ORIENTED_EDGE('',*,*,#6086,.T.);+#6086=EDGE_CURVE('',#6082,#6087,#6089,.T.);+#6087=VERTEX_POINT('',#6088);+#6088=CARTESIAN_POINT('',(5.568163490354,8.275,-1.387778780781E-16));+#6089=CIRCLE('',#6090,0.2);+#6090=AXIS2_PLACEMENT_3D('',#6091,#59,#6022);+#6091=CARTESIAN_POINT('',(5.568163490354,8.275,0.2));+#6092=ORIENTED_EDGE('',*,*,#6093,.T.);+#6093=EDGE_CURVE('',#6087,#6094,#6096,.T.);+#6094=VERTEX_POINT('',#6095);+#6095=CARTESIAN_POINT('',(5.83,8.275,-1.387778780781E-16));+#6096=LINE('',#6088,#27);+#6097=ORIENTED_EDGE('',*,*,#6098,.T.);+#6098=EDGE_CURVE('',#6094,#6099,#6101,.T.);+#6099=VERTEX_POINT('',#6100);+#6100=CARTESIAN_POINT('',(5.83,8.275,1.E-01));+#6101=LINE('',#6095,#658);+#6102=ORIENTED_EDGE('',*,*,#6103,.T.);+#6103=EDGE_CURVE('',#6099,#6104,#6106,.T.);+#6104=VERTEX_POINT('',#6105);+#6105=CARTESIAN_POINT('',(5.568163490354,8.275,0.1));+#6106=LINE('',#6100,#72);+#6107=ORIENTED_EDGE('',*,*,#6108,.T.);+#6108=EDGE_CURVE('',#6104,#6109,#6111,.T.);+#6109=VERTEX_POINT('',#6110);+#6110=CARTESIAN_POINT('',(5.469682715053,8.275,0.182635182233));+#6111=CIRCLE('',#6112,0.1);+#6112=AXIS2_PLACEMENT_3D('',#6091,#87,#6044);+#6113=ORIENTED_EDGE('',*,*,#6114,.T.);+#6114=EDGE_CURVE('',#6109,#6115,#6117,.T.);+#6115=VERTEX_POINT('',#6116);+#6116=CARTESIAN_POINT('',(5.376961550602,8.275,0.734729635533));+#6117=LINE('',#6110,#6050);+#6118=ORIENTED_EDGE('',*,*,#6119,.T.);+#6119=EDGE_CURVE('',#6115,#2881,#6120,.T.);+#6120=CIRCLE('',#6121,0.2);+#6121=AXIS2_PLACEMENT_3D('',#6071,#59,#6056);+#6122=PLANE('',#6123);+#6123=AXIS2_PLACEMENT_3D('',#6124,#59,#13);+#6124=CARTESIAN_POINT('',(5.377811491544,8.275,0.447016202907));+#6125=ADVANCED_FACE('',(#6126),#628,.F.);+#6126=FACE_BOUND('',#6127,.F.);+#6127=EDGE_LOOP('',(#6128,#6129,#6130,#6134));+#6128=ORIENTED_EDGE('',*,*,#2888,.F.);+#6129=ORIENTED_EDGE('',*,*,#1567,.T.);+#6130=ORIENTED_EDGE('',*,*,#6131,.T.);+#6131=EDGE_CURVE('',#1562,#2693,#6132,.T.);+#6132=LINE('',#6133,#72);+#6133=CARTESIAN_POINT('',(5.18,7.725,0.9));+#6134=ORIENTED_EDGE('',*,*,#2692,.F.);+#6135=ADVANCED_FACE('',(#6136),#6192,.F.);+#6136=FACE_BOUND('',#6137,.F.);+#6137=EDGE_LOOP('',(#6138,#6139,#6140,#6147,#6152,#6159,#6164,#6169,#6174,#6180,#6185,#6190));+#6138=ORIENTED_EDGE('',*,*,#1561,.F.);+#6139=ORIENTED_EDGE('',*,*,#1572,.T.);+#6140=ORIENTED_EDGE('',*,*,#6141,.T.);+#6141=EDGE_CURVE('',#1573,#6142,#6144,.T.);+#6142=VERTEX_POINT('',#6143);+#6143=CARTESIAN_POINT('',(5.278480775301,7.725,0.717364817767));+#6144=CIRCLE('',#6145,1.E-01);+#6145=AXIS2_PLACEMENT_3D('',#6146,#87,#6007);+#6146=CARTESIAN_POINT('',(5.18,7.725,0.7));+#6147=ORIENTED_EDGE('',*,*,#6148,.T.);+#6148=EDGE_CURVE('',#6142,#6149,#6151,.T.);+#6149=VERTEX_POINT('',#6150);+#6150=CARTESIAN_POINT('',(5.371201939752,7.725,0.165270364467));+#6151=LINE('',#6143,#6013);+#6152=ORIENTED_EDGE('',*,*,#6153,.T.);+#6153=EDGE_CURVE('',#6149,#6154,#6156,.T.);+#6154=VERTEX_POINT('',#6155);+#6155=CARTESIAN_POINT('',(5.568163490354,7.725,-1.387778780781E-16));+#6156=CIRCLE('',#6157,0.2);+#6157=AXIS2_PLACEMENT_3D('',#6158,#59,#6022);+#6158=CARTESIAN_POINT('',(5.568163490354,7.725,0.2));+#6159=ORIENTED_EDGE('',*,*,#6160,.T.);+#6160=EDGE_CURVE('',#6154,#6161,#6163,.T.);+#6161=VERTEX_POINT('',#6162);+#6162=CARTESIAN_POINT('',(5.83,7.725,-1.387778780781E-16));+#6163=LINE('',#6155,#27);+#6164=ORIENTED_EDGE('',*,*,#6165,.T.);+#6165=EDGE_CURVE('',#6161,#6166,#6168,.T.);+#6166=VERTEX_POINT('',#6167);+#6167=CARTESIAN_POINT('',(5.83,7.725,1.E-01));+#6168=LINE('',#6162,#658);+#6169=ORIENTED_EDGE('',*,*,#6170,.T.);+#6170=EDGE_CURVE('',#6166,#6171,#6173,.T.);+#6171=VERTEX_POINT('',#6172);+#6172=CARTESIAN_POINT('',(5.568163490354,7.725,0.1));+#6173=LINE('',#6167,#72);+#6174=ORIENTED_EDGE('',*,*,#6175,.T.);+#6175=EDGE_CURVE('',#6171,#6176,#6178,.T.);+#6176=VERTEX_POINT('',#6177);+#6177=CARTESIAN_POINT('',(5.469682715053,7.725,0.182635182233));+#6178=CIRCLE('',#6179,0.1);+#6179=AXIS2_PLACEMENT_3D('',#6158,#87,#6044);+#6180=ORIENTED_EDGE('',*,*,#6181,.T.);+#6181=EDGE_CURVE('',#6176,#6182,#6184,.T.);+#6182=VERTEX_POINT('',#6183);+#6183=CARTESIAN_POINT('',(5.376961550602,7.725,0.734729635533));+#6184=LINE('',#6177,#6050);+#6185=ORIENTED_EDGE('',*,*,#6186,.T.);+#6186=EDGE_CURVE('',#6182,#6187,#6188,.T.);+#6187=VERTEX_POINT('',#6133);+#6188=CIRCLE('',#6189,0.2);+#6189=AXIS2_PLACEMENT_3D('',#6146,#59,#6056);+#6190=ORIENTED_EDGE('',*,*,#6191,.T.);+#6191=EDGE_CURVE('',#6187,#1562,#6132,.T.);+#6192=PLANE('',#6193);+#6193=AXIS2_PLACEMENT_3D('',#6194,#59,#13);+#6194=CARTESIAN_POINT('',(5.377811491544,7.725,0.447016202907));+#6195=ADVANCED_FACE('',(#6196),#6210,.F.);+#6196=FACE_BOUND('',#6197,.F.);+#6197=EDGE_LOOP('',(#6198,#6199,#6206,#6209));+#6198=ORIENTED_EDGE('',*,*,#1585,.T.);+#6199=ORIENTED_EDGE('',*,*,#6200,.T.);+#6200=EDGE_CURVE('',#1580,#6201,#6203,.T.);+#6201=VERTEX_POINT('',#6202);+#6202=CARTESIAN_POINT('',(5.278480775301,7.475,0.717364817767));+#6203=CIRCLE('',#6204,1.E-01);+#6204=AXIS2_PLACEMENT_3D('',#6205,#87,#6007);+#6205=CARTESIAN_POINT('',(5.18,7.475,0.7));+#6206=ORIENTED_EDGE('',*,*,#6207,.F.);+#6207=EDGE_CURVE('',#6142,#6201,#6208,.T.);+#6208=LINE('',#6143,#58);+#6209=ORIENTED_EDGE('',*,*,#6141,.F.);+#6210=CYLINDRICAL_SURFACE('',#6145,1.E-01);+#6211=ADVANCED_FACE('',(#6212),#6261,.T.);+#6212=FACE_BOUND('',#6213,.T.);+#6213=EDGE_LOOP('',(#1592,#1578,#6199,#6214,#6219,#6226,#6231,#6236,#6241,#6247,#6252,#6258));+#6214=ORIENTED_EDGE('',*,*,#6215,.T.);+#6215=EDGE_CURVE('',#6201,#6216,#6218,.T.);+#6216=VERTEX_POINT('',#6217);+#6217=CARTESIAN_POINT('',(5.371201939752,7.475,0.165270364467));+#6218=LINE('',#6202,#6013);+#6219=ORIENTED_EDGE('',*,*,#6220,.T.);+#6220=EDGE_CURVE('',#6216,#6221,#6223,.T.);+#6221=VERTEX_POINT('',#6222);+#6222=CARTESIAN_POINT('',(5.568163490354,7.475,-1.387778780781E-16));+#6223=CIRCLE('',#6224,0.2);+#6224=AXIS2_PLACEMENT_3D('',#6225,#59,#6022);+#6225=CARTESIAN_POINT('',(5.568163490354,7.475,0.2));+#6226=ORIENTED_EDGE('',*,*,#6227,.T.);+#6227=EDGE_CURVE('',#6221,#6228,#6230,.T.);+#6228=VERTEX_POINT('',#6229);+#6229=CARTESIAN_POINT('',(5.83,7.475,-1.387778780781E-16));+#6230=LINE('',#6222,#27);+#6231=ORIENTED_EDGE('',*,*,#6232,.T.);+#6232=EDGE_CURVE('',#6228,#6233,#6235,.T.);+#6233=VERTEX_POINT('',#6234);+#6234=CARTESIAN_POINT('',(5.83,7.475,1.E-01));+#6235=LINE('',#6229,#658);+#6236=ORIENTED_EDGE('',*,*,#6237,.T.);+#6237=EDGE_CURVE('',#6233,#6238,#6240,.T.);+#6238=VERTEX_POINT('',#6239);+#6239=CARTESIAN_POINT('',(5.568163490354,7.475,0.1));+#6240=LINE('',#6234,#72);+#6241=ORIENTED_EDGE('',*,*,#6242,.T.);+#6242=EDGE_CURVE('',#6238,#6243,#6245,.T.);+#6243=VERTEX_POINT('',#6244);+#6244=CARTESIAN_POINT('',(5.469682715053,7.475,0.182635182233));+#6245=CIRCLE('',#6246,0.1);+#6246=AXIS2_PLACEMENT_3D('',#6225,#87,#6044);+#6247=ORIENTED_EDGE('',*,*,#6248,.T.);+#6248=EDGE_CURVE('',#6243,#6249,#6251,.T.);+#6249=VERTEX_POINT('',#6250);+#6250=CARTESIAN_POINT('',(5.376961550602,7.475,0.734729635533));+#6251=LINE('',#6244,#6050);+#6252=ORIENTED_EDGE('',*,*,#6253,.T.);+#6253=EDGE_CURVE('',#6249,#6254,#6256,.T.);+#6254=VERTEX_POINT('',#6255);+#6255=CARTESIAN_POINT('',(5.18,7.475,0.9));+#6256=CIRCLE('',#6257,0.2);+#6257=AXIS2_PLACEMENT_3D('',#6205,#59,#6056);+#6258=ORIENTED_EDGE('',*,*,#6259,.T.);+#6259=EDGE_CURVE('',#6254,#1594,#6260,.T.);+#6260=LINE('',#6255,#72);+#6261=PLANE('',#6262);+#6262=AXIS2_PLACEMENT_3D('',#6263,#59,#13);+#6263=CARTESIAN_POINT('',(5.377811491544,7.475,0.447016202907));+#6264=ADVANCED_FACE('',(#6265),#628,.F.);+#6265=FACE_BOUND('',#6266,.F.);+#6266=EDGE_LOOP('',(#6267,#6269,#6270,#6274));+#6267=ORIENTED_EDGE('',*,*,#6268,.F.);+#6268=EDGE_CURVE('',#1594,#2697,#6260,.T.);+#6269=ORIENTED_EDGE('',*,*,#1606,.T.);+#6270=ORIENTED_EDGE('',*,*,#6271,.T.);+#6271=EDGE_CURVE('',#1601,#2701,#6272,.T.);+#6272=LINE('',#6273,#72);+#6273=CARTESIAN_POINT('',(5.18,6.925,0.9));+#6274=ORIENTED_EDGE('',*,*,#2700,.F.);+#6275=ADVANCED_FACE('',(#6276),#6332,.F.);+#6276=FACE_BOUND('',#6277,.F.);+#6277=EDGE_LOOP('',(#6278,#6279,#6280,#6287,#6292,#6299,#6304,#6309,#6314,#6320,#6325,#6330));+#6278=ORIENTED_EDGE('',*,*,#1600,.F.);+#6279=ORIENTED_EDGE('',*,*,#1611,.T.);+#6280=ORIENTED_EDGE('',*,*,#6281,.T.);+#6281=EDGE_CURVE('',#1612,#6282,#6284,.T.);+#6282=VERTEX_POINT('',#6283);+#6283=CARTESIAN_POINT('',(5.278480775301,6.925,0.717364817767));+#6284=CIRCLE('',#6285,1.E-01);+#6285=AXIS2_PLACEMENT_3D('',#6286,#87,#6007);+#6286=CARTESIAN_POINT('',(5.18,6.925,0.7));+#6287=ORIENTED_EDGE('',*,*,#6288,.T.);+#6288=EDGE_CURVE('',#6282,#6289,#6291,.T.);+#6289=VERTEX_POINT('',#6290);+#6290=CARTESIAN_POINT('',(5.371201939752,6.925,0.165270364467));+#6291=LINE('',#6283,#6013);+#6292=ORIENTED_EDGE('',*,*,#6293,.T.);+#6293=EDGE_CURVE('',#6289,#6294,#6296,.T.);+#6294=VERTEX_POINT('',#6295);+#6295=CARTESIAN_POINT('',(5.568163490354,6.925,-1.387778780781E-16));+#6296=CIRCLE('',#6297,0.2);+#6297=AXIS2_PLACEMENT_3D('',#6298,#59,#6022);+#6298=CARTESIAN_POINT('',(5.568163490354,6.925,0.2));+#6299=ORIENTED_EDGE('',*,*,#6300,.T.);+#6300=EDGE_CURVE('',#6294,#6301,#6303,.T.);+#6301=VERTEX_POINT('',#6302);+#6302=CARTESIAN_POINT('',(5.83,6.925,-1.387778780781E-16));+#6303=LINE('',#6295,#27);+#6304=ORIENTED_EDGE('',*,*,#6305,.T.);+#6305=EDGE_CURVE('',#6301,#6306,#6308,.T.);+#6306=VERTEX_POINT('',#6307);+#6307=CARTESIAN_POINT('',(5.83,6.925,1.E-01));+#6308=LINE('',#6302,#658);+#6309=ORIENTED_EDGE('',*,*,#6310,.T.);+#6310=EDGE_CURVE('',#6306,#6311,#6313,.T.);+#6311=VERTEX_POINT('',#6312);+#6312=CARTESIAN_POINT('',(5.568163490354,6.925,0.1));+#6313=LINE('',#6307,#72);+#6314=ORIENTED_EDGE('',*,*,#6315,.T.);+#6315=EDGE_CURVE('',#6311,#6316,#6318,.T.);+#6316=VERTEX_POINT('',#6317);+#6317=CARTESIAN_POINT('',(5.469682715053,6.925,0.182635182233));+#6318=CIRCLE('',#6319,0.1);+#6319=AXIS2_PLACEMENT_3D('',#6298,#87,#6044);+#6320=ORIENTED_EDGE('',*,*,#6321,.T.);+#6321=EDGE_CURVE('',#6316,#6322,#6324,.T.);+#6322=VERTEX_POINT('',#6323);+#6323=CARTESIAN_POINT('',(5.376961550602,6.925,0.734729635533));+#6324=LINE('',#6317,#6050);+#6325=ORIENTED_EDGE('',*,*,#6326,.T.);+#6326=EDGE_CURVE('',#6322,#6327,#6328,.T.);+#6327=VERTEX_POINT('',#6273);+#6328=CIRCLE('',#6329,0.2);+#6329=AXIS2_PLACEMENT_3D('',#6286,#59,#6056);+#6330=ORIENTED_EDGE('',*,*,#6331,.T.);+#6331=EDGE_CURVE('',#6327,#1601,#6272,.T.);+#6332=PLANE('',#6333);+#6333=AXIS2_PLACEMENT_3D('',#6334,#59,#13);+#6334=CARTESIAN_POINT('',(5.377811491544,6.925,0.447016202907));+#6335=ADVANCED_FACE('',(#6336),#6350,.F.);+#6336=FACE_BOUND('',#6337,.F.);+#6337=EDGE_LOOP('',(#6338,#6339,#6346,#6349));+#6338=ORIENTED_EDGE('',*,*,#1624,.T.);+#6339=ORIENTED_EDGE('',*,*,#6340,.T.);+#6340=EDGE_CURVE('',#1619,#6341,#6343,.T.);+#6341=VERTEX_POINT('',#6342);+#6342=CARTESIAN_POINT('',(5.278480775301,6.675,0.717364817767));+#6343=CIRCLE('',#6344,1.E-01);+#6344=AXIS2_PLACEMENT_3D('',#6345,#87,#6007);+#6345=CARTESIAN_POINT('',(5.18,6.675,0.7));+#6346=ORIENTED_EDGE('',*,*,#6347,.F.);+#6347=EDGE_CURVE('',#6282,#6341,#6348,.T.);+#6348=LINE('',#6283,#58);+#6349=ORIENTED_EDGE('',*,*,#6281,.F.);+#6350=CYLINDRICAL_SURFACE('',#6285,1.E-01);+#6351=ADVANCED_FACE('',(#6352),#6401,.T.);+#6352=FACE_BOUND('',#6353,.T.);+#6353=EDGE_LOOP('',(#1631,#1617,#6339,#6354,#6359,#6366,#6371,#6376,#6381,#6387,#6392,#6398));+#6354=ORIENTED_EDGE('',*,*,#6355,.T.);+#6355=EDGE_CURVE('',#6341,#6356,#6358,.T.);+#6356=VERTEX_POINT('',#6357);+#6357=CARTESIAN_POINT('',(5.371201939752,6.675,0.165270364467));+#6358=LINE('',#6342,#6013);+#6359=ORIENTED_EDGE('',*,*,#6360,.T.);+#6360=EDGE_CURVE('',#6356,#6361,#6363,.T.);+#6361=VERTEX_POINT('',#6362);+#6362=CARTESIAN_POINT('',(5.568163490354,6.675,-1.387778780781E-16));+#6363=CIRCLE('',#6364,0.2);+#6364=AXIS2_PLACEMENT_3D('',#6365,#59,#6022);+#6365=CARTESIAN_POINT('',(5.568163490354,6.675,0.2));+#6366=ORIENTED_EDGE('',*,*,#6367,.T.);+#6367=EDGE_CURVE('',#6361,#6368,#6370,.T.);+#6368=VERTEX_POINT('',#6369);+#6369=CARTESIAN_POINT('',(5.83,6.675,-1.387778780781E-16));+#6370=LINE('',#6362,#27);+#6371=ORIENTED_EDGE('',*,*,#6372,.T.);+#6372=EDGE_CURVE('',#6368,#6373,#6375,.T.);+#6373=VERTEX_POINT('',#6374);+#6374=CARTESIAN_POINT('',(5.83,6.675,1.E-01));+#6375=LINE('',#6369,#658);+#6376=ORIENTED_EDGE('',*,*,#6377,.T.);+#6377=EDGE_CURVE('',#6373,#6378,#6380,.T.);+#6378=VERTEX_POINT('',#6379);+#6379=CARTESIAN_POINT('',(5.568163490354,6.675,0.1));+#6380=LINE('',#6374,#72);+#6381=ORIENTED_EDGE('',*,*,#6382,.T.);+#6382=EDGE_CURVE('',#6378,#6383,#6385,.T.);+#6383=VERTEX_POINT('',#6384);+#6384=CARTESIAN_POINT('',(5.469682715053,6.675,0.182635182233));+#6385=CIRCLE('',#6386,0.1);+#6386=AXIS2_PLACEMENT_3D('',#6365,#87,#6044);+#6387=ORIENTED_EDGE('',*,*,#6388,.T.);+#6388=EDGE_CURVE('',#6383,#6389,#6391,.T.);+#6389=VERTEX_POINT('',#6390);+#6390=CARTESIAN_POINT('',(5.376961550602,6.675,0.734729635533));+#6391=LINE('',#6384,#6050);+#6392=ORIENTED_EDGE('',*,*,#6393,.T.);+#6393=EDGE_CURVE('',#6389,#6394,#6396,.T.);+#6394=VERTEX_POINT('',#6395);+#6395=CARTESIAN_POINT('',(5.18,6.675,0.9));+#6396=CIRCLE('',#6397,0.2);+#6397=AXIS2_PLACEMENT_3D('',#6345,#59,#6056);+#6398=ORIENTED_EDGE('',*,*,#6399,.T.);+#6399=EDGE_CURVE('',#6394,#1633,#6400,.T.);+#6400=LINE('',#6395,#72);+#6401=PLANE('',#6402);+#6402=AXIS2_PLACEMENT_3D('',#6403,#59,#13);+#6403=CARTESIAN_POINT('',(5.377811491544,6.675,0.447016202907));+#6404=ADVANCED_FACE('',(#6405),#628,.F.);+#6405=FACE_BOUND('',#6406,.F.);+#6406=EDGE_LOOP('',(#6407,#6409,#6410,#6414));+#6407=ORIENTED_EDGE('',*,*,#6408,.F.);+#6408=EDGE_CURVE('',#1633,#2705,#6400,.T.);+#6409=ORIENTED_EDGE('',*,*,#1645,.T.);+#6410=ORIENTED_EDGE('',*,*,#6411,.T.);+#6411=EDGE_CURVE('',#1640,#2709,#6412,.T.);+#6412=LINE('',#6413,#72);+#6413=CARTESIAN_POINT('',(5.18,6.125,0.9));+#6414=ORIENTED_EDGE('',*,*,#2708,.F.);+#6415=ADVANCED_FACE('',(#6416),#6472,.F.);+#6416=FACE_BOUND('',#6417,.F.);+#6417=EDGE_LOOP('',(#6418,#6419,#6420,#6427,#6432,#6439,#6444,#6449,#6454,#6460,#6465,#6470));+#6418=ORIENTED_EDGE('',*,*,#1639,.F.);+#6419=ORIENTED_EDGE('',*,*,#1650,.T.);+#6420=ORIENTED_EDGE('',*,*,#6421,.T.);+#6421=EDGE_CURVE('',#1651,#6422,#6424,.T.);+#6422=VERTEX_POINT('',#6423);+#6423=CARTESIAN_POINT('',(5.278480775301,6.125,0.717364817767));+#6424=CIRCLE('',#6425,1.E-01);+#6425=AXIS2_PLACEMENT_3D('',#6426,#87,#6007);+#6426=CARTESIAN_POINT('',(5.18,6.125,0.7));+#6427=ORIENTED_EDGE('',*,*,#6428,.T.);+#6428=EDGE_CURVE('',#6422,#6429,#6431,.T.);+#6429=VERTEX_POINT('',#6430);+#6430=CARTESIAN_POINT('',(5.371201939752,6.125,0.165270364467));+#6431=LINE('',#6423,#6013);+#6432=ORIENTED_EDGE('',*,*,#6433,.T.);+#6433=EDGE_CURVE('',#6429,#6434,#6436,.T.);+#6434=VERTEX_POINT('',#6435);+#6435=CARTESIAN_POINT('',(5.568163490354,6.125,-1.387778780781E-16));+#6436=CIRCLE('',#6437,0.2);+#6437=AXIS2_PLACEMENT_3D('',#6438,#59,#6022);+#6438=CARTESIAN_POINT('',(5.568163490354,6.125,0.2));+#6439=ORIENTED_EDGE('',*,*,#6440,.T.);+#6440=EDGE_CURVE('',#6434,#6441,#6443,.T.);+#6441=VERTEX_POINT('',#6442);+#6442=CARTESIAN_POINT('',(5.83,6.125,-1.387778780781E-16));+#6443=LINE('',#6435,#27);+#6444=ORIENTED_EDGE('',*,*,#6445,.T.);+#6445=EDGE_CURVE('',#6441,#6446,#6448,.T.);+#6446=VERTEX_POINT('',#6447);+#6447=CARTESIAN_POINT('',(5.83,6.125,1.E-01));+#6448=LINE('',#6442,#658);+#6449=ORIENTED_EDGE('',*,*,#6450,.T.);+#6450=EDGE_CURVE('',#6446,#6451,#6453,.T.);+#6451=VERTEX_POINT('',#6452);+#6452=CARTESIAN_POINT('',(5.568163490354,6.125,0.1));+#6453=LINE('',#6447,#72);+#6454=ORIENTED_EDGE('',*,*,#6455,.T.);+#6455=EDGE_CURVE('',#6451,#6456,#6458,.T.);+#6456=VERTEX_POINT('',#6457);+#6457=CARTESIAN_POINT('',(5.469682715053,6.125,0.182635182233));+#6458=CIRCLE('',#6459,0.1);+#6459=AXIS2_PLACEMENT_3D('',#6438,#87,#6044);+#6460=ORIENTED_EDGE('',*,*,#6461,.T.);+#6461=EDGE_CURVE('',#6456,#6462,#6464,.T.);+#6462=VERTEX_POINT('',#6463);+#6463=CARTESIAN_POINT('',(5.376961550602,6.125,0.734729635533));+#6464=LINE('',#6457,#6050);+#6465=ORIENTED_EDGE('',*,*,#6466,.T.);+#6466=EDGE_CURVE('',#6462,#6467,#6468,.T.);+#6467=VERTEX_POINT('',#6413);+#6468=CIRCLE('',#6469,0.2);+#6469=AXIS2_PLACEMENT_3D('',#6426,#59,#6056);+#6470=ORIENTED_EDGE('',*,*,#6471,.T.);+#6471=EDGE_CURVE('',#6467,#1640,#6412,.T.);+#6472=PLANE('',#6473);+#6473=AXIS2_PLACEMENT_3D('',#6474,#59,#13);+#6474=CARTESIAN_POINT('',(5.377811491544,6.125,0.447016202907));+#6475=ADVANCED_FACE('',(#6476),#6490,.F.);+#6476=FACE_BOUND('',#6477,.F.);+#6477=EDGE_LOOP('',(#6478,#6479,#6486,#6489));+#6478=ORIENTED_EDGE('',*,*,#1663,.T.);+#6479=ORIENTED_EDGE('',*,*,#6480,.T.);+#6480=EDGE_CURVE('',#1658,#6481,#6483,.T.);+#6481=VERTEX_POINT('',#6482);+#6482=CARTESIAN_POINT('',(5.278480775301,5.875,0.717364817767));+#6483=CIRCLE('',#6484,1.E-01);+#6484=AXIS2_PLACEMENT_3D('',#6485,#87,#6007);+#6485=CARTESIAN_POINT('',(5.18,5.875,0.7));+#6486=ORIENTED_EDGE('',*,*,#6487,.F.);+#6487=EDGE_CURVE('',#6422,#6481,#6488,.T.);+#6488=LINE('',#6423,#58);+#6489=ORIENTED_EDGE('',*,*,#6421,.F.);+#6490=CYLINDRICAL_SURFACE('',#6425,1.E-01);+#6491=ADVANCED_FACE('',(#6492),#6541,.T.);+#6492=FACE_BOUND('',#6493,.T.);+#6493=EDGE_LOOP('',(#1670,#1656,#6479,#6494,#6499,#6506,#6511,#6516,#6521,#6527,#6532,#6538));+#6494=ORIENTED_EDGE('',*,*,#6495,.T.);+#6495=EDGE_CURVE('',#6481,#6496,#6498,.T.);+#6496=VERTEX_POINT('',#6497);+#6497=CARTESIAN_POINT('',(5.371201939752,5.875,0.165270364467));+#6498=LINE('',#6482,#6013);+#6499=ORIENTED_EDGE('',*,*,#6500,.T.);+#6500=EDGE_CURVE('',#6496,#6501,#6503,.T.);+#6501=VERTEX_POINT('',#6502);+#6502=CARTESIAN_POINT('',(5.568163490354,5.875,-1.387778780781E-16));+#6503=CIRCLE('',#6504,0.2);+#6504=AXIS2_PLACEMENT_3D('',#6505,#59,#6022);+#6505=CARTESIAN_POINT('',(5.568163490354,5.875,0.2));+#6506=ORIENTED_EDGE('',*,*,#6507,.T.);+#6507=EDGE_CURVE('',#6501,#6508,#6510,.T.);+#6508=VERTEX_POINT('',#6509);+#6509=CARTESIAN_POINT('',(5.83,5.875,-1.387778780781E-16));+#6510=LINE('',#6502,#27);+#6511=ORIENTED_EDGE('',*,*,#6512,.T.);+#6512=EDGE_CURVE('',#6508,#6513,#6515,.T.);+#6513=VERTEX_POINT('',#6514);+#6514=CARTESIAN_POINT('',(5.83,5.875,1.E-01));+#6515=LINE('',#6509,#658);+#6516=ORIENTED_EDGE('',*,*,#6517,.T.);+#6517=EDGE_CURVE('',#6513,#6518,#6520,.T.);+#6518=VERTEX_POINT('',#6519);+#6519=CARTESIAN_POINT('',(5.568163490354,5.875,0.1));+#6520=LINE('',#6514,#72);+#6521=ORIENTED_EDGE('',*,*,#6522,.T.);+#6522=EDGE_CURVE('',#6518,#6523,#6525,.T.);+#6523=VERTEX_POINT('',#6524);+#6524=CARTESIAN_POINT('',(5.469682715053,5.875,0.182635182233));+#6525=CIRCLE('',#6526,0.1);+#6526=AXIS2_PLACEMENT_3D('',#6505,#87,#6044);+#6527=ORIENTED_EDGE('',*,*,#6528,.T.);+#6528=EDGE_CURVE('',#6523,#6529,#6531,.T.);+#6529=VERTEX_POINT('',#6530);+#6530=CARTESIAN_POINT('',(5.376961550602,5.875,0.734729635533));+#6531=LINE('',#6524,#6050);+#6532=ORIENTED_EDGE('',*,*,#6533,.T.);+#6533=EDGE_CURVE('',#6529,#6534,#6536,.T.);+#6534=VERTEX_POINT('',#6535);+#6535=CARTESIAN_POINT('',(5.18,5.875,0.9));+#6536=CIRCLE('',#6537,0.2);+#6537=AXIS2_PLACEMENT_3D('',#6485,#59,#6056);+#6538=ORIENTED_EDGE('',*,*,#6539,.T.);+#6539=EDGE_CURVE('',#6534,#1672,#6540,.T.);+#6540=LINE('',#6535,#72);+#6541=PLANE('',#6542);+#6542=AXIS2_PLACEMENT_3D('',#6543,#59,#13);+#6543=CARTESIAN_POINT('',(5.377811491544,5.875,0.447016202907));+#6544=ADVANCED_FACE('',(#6545),#628,.F.);+#6545=FACE_BOUND('',#6546,.F.);+#6546=EDGE_LOOP('',(#6547,#6549,#6550,#6554));+#6547=ORIENTED_EDGE('',*,*,#6548,.F.);+#6548=EDGE_CURVE('',#1672,#2713,#6540,.T.);+#6549=ORIENTED_EDGE('',*,*,#1684,.T.);+#6550=ORIENTED_EDGE('',*,*,#6551,.T.);+#6551=EDGE_CURVE('',#1679,#2717,#6552,.T.);+#6552=LINE('',#6553,#72);+#6553=CARTESIAN_POINT('',(5.18,5.325,0.9));+#6554=ORIENTED_EDGE('',*,*,#2716,.F.);+#6555=ADVANCED_FACE('',(#6556),#6612,.F.);+#6556=FACE_BOUND('',#6557,.F.);+#6557=EDGE_LOOP('',(#6558,#6559,#6560,#6567,#6572,#6579,#6584,#6589,#6594,#6600,#6605,#6610));+#6558=ORIENTED_EDGE('',*,*,#1678,.F.);+#6559=ORIENTED_EDGE('',*,*,#1689,.T.);+#6560=ORIENTED_EDGE('',*,*,#6561,.T.);+#6561=EDGE_CURVE('',#1690,#6562,#6564,.T.);+#6562=VERTEX_POINT('',#6563);+#6563=CARTESIAN_POINT('',(5.278480775301,5.325,0.717364817767));+#6564=CIRCLE('',#6565,1.E-01);+#6565=AXIS2_PLACEMENT_3D('',#6566,#87,#6007);+#6566=CARTESIAN_POINT('',(5.18,5.325,0.7));+#6567=ORIENTED_EDGE('',*,*,#6568,.T.);+#6568=EDGE_CURVE('',#6562,#6569,#6571,.T.);+#6569=VERTEX_POINT('',#6570);+#6570=CARTESIAN_POINT('',(5.371201939752,5.325,0.165270364467));+#6571=LINE('',#6563,#6013);+#6572=ORIENTED_EDGE('',*,*,#6573,.T.);+#6573=EDGE_CURVE('',#6569,#6574,#6576,.T.);+#6574=VERTEX_POINT('',#6575);+#6575=CARTESIAN_POINT('',(5.568163490354,5.325,-1.387778780781E-16));+#6576=CIRCLE('',#6577,0.2);+#6577=AXIS2_PLACEMENT_3D('',#6578,#59,#6022);+#6578=CARTESIAN_POINT('',(5.568163490354,5.325,0.2));+#6579=ORIENTED_EDGE('',*,*,#6580,.T.);+#6580=EDGE_CURVE('',#6574,#6581,#6583,.T.);+#6581=VERTEX_POINT('',#6582);+#6582=CARTESIAN_POINT('',(5.83,5.325,-1.387778780781E-16));+#6583=LINE('',#6575,#27);+#6584=ORIENTED_EDGE('',*,*,#6585,.T.);+#6585=EDGE_CURVE('',#6581,#6586,#6588,.T.);+#6586=VERTEX_POINT('',#6587);+#6587=CARTESIAN_POINT('',(5.83,5.325,1.E-01));+#6588=LINE('',#6582,#658);+#6589=ORIENTED_EDGE('',*,*,#6590,.T.);+#6590=EDGE_CURVE('',#6586,#6591,#6593,.T.);+#6591=VERTEX_POINT('',#6592);+#6592=CARTESIAN_POINT('',(5.568163490354,5.325,0.1));+#6593=LINE('',#6587,#72);+#6594=ORIENTED_EDGE('',*,*,#6595,.T.);+#6595=EDGE_CURVE('',#6591,#6596,#6598,.T.);+#6596=VERTEX_POINT('',#6597);+#6597=CARTESIAN_POINT('',(5.469682715053,5.325,0.182635182233));+#6598=CIRCLE('',#6599,0.1);+#6599=AXIS2_PLACEMENT_3D('',#6578,#87,#6044);+#6600=ORIENTED_EDGE('',*,*,#6601,.T.);+#6601=EDGE_CURVE('',#6596,#6602,#6604,.T.);+#6602=VERTEX_POINT('',#6603);+#6603=CARTESIAN_POINT('',(5.376961550602,5.325,0.734729635533));+#6604=LINE('',#6597,#6050);+#6605=ORIENTED_EDGE('',*,*,#6606,.T.);+#6606=EDGE_CURVE('',#6602,#6607,#6608,.T.);+#6607=VERTEX_POINT('',#6553);+#6608=CIRCLE('',#6609,0.2);+#6609=AXIS2_PLACEMENT_3D('',#6566,#59,#6056);+#6610=ORIENTED_EDGE('',*,*,#6611,.T.);+#6611=EDGE_CURVE('',#6607,#1679,#6552,.T.);+#6612=PLANE('',#6613);+#6613=AXIS2_PLACEMENT_3D('',#6614,#59,#13);+#6614=CARTESIAN_POINT('',(5.377811491544,5.325,0.447016202907));+#6615=ADVANCED_FACE('',(#6616),#6630,.F.);+#6616=FACE_BOUND('',#6617,.F.);+#6617=EDGE_LOOP('',(#6618,#6619,#6626,#6629));+#6618=ORIENTED_EDGE('',*,*,#1702,.T.);+#6619=ORIENTED_EDGE('',*,*,#6620,.T.);+#6620=EDGE_CURVE('',#1697,#6621,#6623,.T.);+#6621=VERTEX_POINT('',#6622);+#6622=CARTESIAN_POINT('',(5.278480775301,5.075,0.717364817767));+#6623=CIRCLE('',#6624,1.E-01);+#6624=AXIS2_PLACEMENT_3D('',#6625,#87,#6007);+#6625=CARTESIAN_POINT('',(5.18,5.075,0.7));+#6626=ORIENTED_EDGE('',*,*,#6627,.F.);+#6627=EDGE_CURVE('',#6562,#6621,#6628,.T.);+#6628=LINE('',#6563,#58);+#6629=ORIENTED_EDGE('',*,*,#6561,.F.);+#6630=CYLINDRICAL_SURFACE('',#6565,1.E-01);+#6631=ADVANCED_FACE('',(#6632),#6681,.T.);+#6632=FACE_BOUND('',#6633,.T.);+#6633=EDGE_LOOP('',(#1709,#1695,#6619,#6634,#6639,#6646,#6651,#6656,#6661,#6667,#6672,#6678));+#6634=ORIENTED_EDGE('',*,*,#6635,.T.);+#6635=EDGE_CURVE('',#6621,#6636,#6638,.T.);+#6636=VERTEX_POINT('',#6637);+#6637=CARTESIAN_POINT('',(5.371201939752,5.075,0.165270364467));+#6638=LINE('',#6622,#6013);+#6639=ORIENTED_EDGE('',*,*,#6640,.T.);+#6640=EDGE_CURVE('',#6636,#6641,#6643,.T.);+#6641=VERTEX_POINT('',#6642);+#6642=CARTESIAN_POINT('',(5.568163490354,5.075,-1.387778780781E-16));+#6643=CIRCLE('',#6644,0.2);+#6644=AXIS2_PLACEMENT_3D('',#6645,#59,#6022);+#6645=CARTESIAN_POINT('',(5.568163490354,5.075,0.2));+#6646=ORIENTED_EDGE('',*,*,#6647,.T.);+#6647=EDGE_CURVE('',#6641,#6648,#6650,.T.);+#6648=VERTEX_POINT('',#6649);+#6649=CARTESIAN_POINT('',(5.83,5.075,-1.387778780781E-16));+#6650=LINE('',#6642,#27);+#6651=ORIENTED_EDGE('',*,*,#6652,.T.);+#6652=EDGE_CURVE('',#6648,#6653,#6655,.T.);+#6653=VERTEX_POINT('',#6654);+#6654=CARTESIAN_POINT('',(5.83,5.075,1.E-01));+#6655=LINE('',#6649,#658);+#6656=ORIENTED_EDGE('',*,*,#6657,.T.);+#6657=EDGE_CURVE('',#6653,#6658,#6660,.T.);+#6658=VERTEX_POINT('',#6659);+#6659=CARTESIAN_POINT('',(5.568163490354,5.075,0.1));+#6660=LINE('',#6654,#72);+#6661=ORIENTED_EDGE('',*,*,#6662,.T.);+#6662=EDGE_CURVE('',#6658,#6663,#6665,.T.);+#6663=VERTEX_POINT('',#6664);+#6664=CARTESIAN_POINT('',(5.469682715053,5.075,0.182635182233));+#6665=CIRCLE('',#6666,0.1);+#6666=AXIS2_PLACEMENT_3D('',#6645,#87,#6044);+#6667=ORIENTED_EDGE('',*,*,#6668,.T.);+#6668=EDGE_CURVE('',#6663,#6669,#6671,.T.);+#6669=VERTEX_POINT('',#6670);+#6670=CARTESIAN_POINT('',(5.376961550602,5.075,0.734729635533));+#6671=LINE('',#6664,#6050);+#6672=ORIENTED_EDGE('',*,*,#6673,.T.);+#6673=EDGE_CURVE('',#6669,#6674,#6676,.T.);+#6674=VERTEX_POINT('',#6675);+#6675=CARTESIAN_POINT('',(5.18,5.075,0.9));+#6676=CIRCLE('',#6677,0.2);+#6677=AXIS2_PLACEMENT_3D('',#6625,#59,#6056);+#6678=ORIENTED_EDGE('',*,*,#6679,.T.);+#6679=EDGE_CURVE('',#6674,#1711,#6680,.T.);+#6680=LINE('',#6675,#72);+#6681=PLANE('',#6682);+#6682=AXIS2_PLACEMENT_3D('',#6683,#59,#13);+#6683=CARTESIAN_POINT('',(5.377811491544,5.075,0.447016202907));+#6684=ADVANCED_FACE('',(#6685),#628,.F.);+#6685=FACE_BOUND('',#6686,.F.);+#6686=EDGE_LOOP('',(#6687,#6689,#6690,#6694));+#6687=ORIENTED_EDGE('',*,*,#6688,.F.);+#6688=EDGE_CURVE('',#1711,#2721,#6680,.T.);+#6689=ORIENTED_EDGE('',*,*,#1723,.T.);+#6690=ORIENTED_EDGE('',*,*,#6691,.T.);+#6691=EDGE_CURVE('',#1718,#2725,#6692,.T.);+#6692=LINE('',#6693,#72);+#6693=CARTESIAN_POINT('',(5.18,4.525,0.9));+#6694=ORIENTED_EDGE('',*,*,#2724,.F.);+#6695=ADVANCED_FACE('',(#6696),#6752,.F.);+#6696=FACE_BOUND('',#6697,.F.);+#6697=EDGE_LOOP('',(#6698,#6699,#6700,#6707,#6712,#6719,#6724,#6729,#6734,#6740,#6745,#6750));+#6698=ORIENTED_EDGE('',*,*,#1717,.F.);+#6699=ORIENTED_EDGE('',*,*,#1728,.T.);+#6700=ORIENTED_EDGE('',*,*,#6701,.T.);+#6701=EDGE_CURVE('',#1729,#6702,#6704,.T.);+#6702=VERTEX_POINT('',#6703);+#6703=CARTESIAN_POINT('',(5.278480775301,4.525,0.717364817767));+#6704=CIRCLE('',#6705,1.E-01);+#6705=AXIS2_PLACEMENT_3D('',#6706,#87,#6007);+#6706=CARTESIAN_POINT('',(5.18,4.525,0.7));+#6707=ORIENTED_EDGE('',*,*,#6708,.T.);+#6708=EDGE_CURVE('',#6702,#6709,#6711,.T.);+#6709=VERTEX_POINT('',#6710);+#6710=CARTESIAN_POINT('',(5.371201939752,4.525,0.165270364467));+#6711=LINE('',#6703,#6013);+#6712=ORIENTED_EDGE('',*,*,#6713,.T.);+#6713=EDGE_CURVE('',#6709,#6714,#6716,.T.);+#6714=VERTEX_POINT('',#6715);+#6715=CARTESIAN_POINT('',(5.568163490354,4.525,-1.387778780781E-16));+#6716=CIRCLE('',#6717,0.2);+#6717=AXIS2_PLACEMENT_3D('',#6718,#59,#6022);+#6718=CARTESIAN_POINT('',(5.568163490354,4.525,0.2));+#6719=ORIENTED_EDGE('',*,*,#6720,.T.);+#6720=EDGE_CURVE('',#6714,#6721,#6723,.T.);+#6721=VERTEX_POINT('',#6722);+#6722=CARTESIAN_POINT('',(5.83,4.525,-1.387778780781E-16));+#6723=LINE('',#6715,#27);+#6724=ORIENTED_EDGE('',*,*,#6725,.T.);+#6725=EDGE_CURVE('',#6721,#6726,#6728,.T.);+#6726=VERTEX_POINT('',#6727);+#6727=CARTESIAN_POINT('',(5.83,4.525,1.E-01));+#6728=LINE('',#6722,#658);+#6729=ORIENTED_EDGE('',*,*,#6730,.T.);+#6730=EDGE_CURVE('',#6726,#6731,#6733,.T.);+#6731=VERTEX_POINT('',#6732);+#6732=CARTESIAN_POINT('',(5.568163490354,4.525,0.1));+#6733=LINE('',#6727,#72);+#6734=ORIENTED_EDGE('',*,*,#6735,.T.);+#6735=EDGE_CURVE('',#6731,#6736,#6738,.T.);+#6736=VERTEX_POINT('',#6737);+#6737=CARTESIAN_POINT('',(5.469682715053,4.525,0.182635182233));+#6738=CIRCLE('',#6739,0.1);+#6739=AXIS2_PLACEMENT_3D('',#6718,#87,#6044);+#6740=ORIENTED_EDGE('',*,*,#6741,.T.);+#6741=EDGE_CURVE('',#6736,#6742,#6744,.T.);+#6742=VERTEX_POINT('',#6743);+#6743=CARTESIAN_POINT('',(5.376961550602,4.525,0.734729635533));+#6744=LINE('',#6737,#6050);+#6745=ORIENTED_EDGE('',*,*,#6746,.T.);+#6746=EDGE_CURVE('',#6742,#6747,#6748,.T.);+#6747=VERTEX_POINT('',#6693);+#6748=CIRCLE('',#6749,0.2);+#6749=AXIS2_PLACEMENT_3D('',#6706,#59,#6056);+#6750=ORIENTED_EDGE('',*,*,#6751,.T.);+#6751=EDGE_CURVE('',#6747,#1718,#6692,.T.);+#6752=PLANE('',#6753);+#6753=AXIS2_PLACEMENT_3D('',#6754,#59,#13);+#6754=CARTESIAN_POINT('',(5.377811491544,4.525,0.447016202907));+#6755=ADVANCED_FACE('',(#6756),#6770,.F.);+#6756=FACE_BOUND('',#6757,.F.);+#6757=EDGE_LOOP('',(#6758,#6759,#6766,#6769));+#6758=ORIENTED_EDGE('',*,*,#1741,.T.);+#6759=ORIENTED_EDGE('',*,*,#6760,.T.);+#6760=EDGE_CURVE('',#1736,#6761,#6763,.T.);+#6761=VERTEX_POINT('',#6762);+#6762=CARTESIAN_POINT('',(5.278480775301,4.275,0.717364817767));+#6763=CIRCLE('',#6764,1.E-01);+#6764=AXIS2_PLACEMENT_3D('',#6765,#87,#6007);+#6765=CARTESIAN_POINT('',(5.18,4.275,0.7));+#6766=ORIENTED_EDGE('',*,*,#6767,.F.);+#6767=EDGE_CURVE('',#6702,#6761,#6768,.T.);+#6768=LINE('',#6703,#58);+#6769=ORIENTED_EDGE('',*,*,#6701,.F.);+#6770=CYLINDRICAL_SURFACE('',#6705,1.E-01);+#6771=ADVANCED_FACE('',(#6772),#6821,.T.);+#6772=FACE_BOUND('',#6773,.T.);+#6773=EDGE_LOOP('',(#1748,#1734,#6759,#6774,#6779,#6786,#6791,#6796,#6801,#6807,#6812,#6818));+#6774=ORIENTED_EDGE('',*,*,#6775,.T.);+#6775=EDGE_CURVE('',#6761,#6776,#6778,.T.);+#6776=VERTEX_POINT('',#6777);+#6777=CARTESIAN_POINT('',(5.371201939752,4.275,0.165270364467));+#6778=LINE('',#6762,#6013);+#6779=ORIENTED_EDGE('',*,*,#6780,.T.);+#6780=EDGE_CURVE('',#6776,#6781,#6783,.T.);+#6781=VERTEX_POINT('',#6782);+#6782=CARTESIAN_POINT('',(5.568163490354,4.275,-1.387778780781E-16));+#6783=CIRCLE('',#6784,0.2);+#6784=AXIS2_PLACEMENT_3D('',#6785,#59,#6022);+#6785=CARTESIAN_POINT('',(5.568163490354,4.275,0.2));+#6786=ORIENTED_EDGE('',*,*,#6787,.T.);+#6787=EDGE_CURVE('',#6781,#6788,#6790,.T.);+#6788=VERTEX_POINT('',#6789);+#6789=CARTESIAN_POINT('',(5.83,4.275,-1.387778780781E-16));+#6790=LINE('',#6782,#27);+#6791=ORIENTED_EDGE('',*,*,#6792,.T.);+#6792=EDGE_CURVE('',#6788,#6793,#6795,.T.);+#6793=VERTEX_POINT('',#6794);+#6794=CARTESIAN_POINT('',(5.83,4.275,1.E-01));+#6795=LINE('',#6789,#658);+#6796=ORIENTED_EDGE('',*,*,#6797,.T.);+#6797=EDGE_CURVE('',#6793,#6798,#6800,.T.);+#6798=VERTEX_POINT('',#6799);+#6799=CARTESIAN_POINT('',(5.568163490354,4.275,0.1));+#6800=LINE('',#6794,#72);+#6801=ORIENTED_EDGE('',*,*,#6802,.T.);+#6802=EDGE_CURVE('',#6798,#6803,#6805,.T.);+#6803=VERTEX_POINT('',#6804);+#6804=CARTESIAN_POINT('',(5.469682715053,4.275,0.182635182233));+#6805=CIRCLE('',#6806,0.1);+#6806=AXIS2_PLACEMENT_3D('',#6785,#87,#6044);+#6807=ORIENTED_EDGE('',*,*,#6808,.T.);+#6808=EDGE_CURVE('',#6803,#6809,#6811,.T.);+#6809=VERTEX_POINT('',#6810);+#6810=CARTESIAN_POINT('',(5.376961550602,4.275,0.734729635533));+#6811=LINE('',#6804,#6050);+#6812=ORIENTED_EDGE('',*,*,#6813,.T.);+#6813=EDGE_CURVE('',#6809,#6814,#6816,.T.);+#6814=VERTEX_POINT('',#6815);+#6815=CARTESIAN_POINT('',(5.18,4.275,0.9));+#6816=CIRCLE('',#6817,0.2);+#6817=AXIS2_PLACEMENT_3D('',#6765,#59,#6056);+#6818=ORIENTED_EDGE('',*,*,#6819,.T.);+#6819=EDGE_CURVE('',#6814,#1750,#6820,.T.);+#6820=LINE('',#6815,#72);+#6821=PLANE('',#6822);+#6822=AXIS2_PLACEMENT_3D('',#6823,#59,#13);+#6823=CARTESIAN_POINT('',(5.377811491544,4.275,0.447016202907));+#6824=ADVANCED_FACE('',(#6825),#628,.F.);+#6825=FACE_BOUND('',#6826,.F.);+#6826=EDGE_LOOP('',(#6827,#6829,#6830,#6834));+#6827=ORIENTED_EDGE('',*,*,#6828,.F.);+#6828=EDGE_CURVE('',#1750,#2729,#6820,.T.);+#6829=ORIENTED_EDGE('',*,*,#1762,.T.);+#6830=ORIENTED_EDGE('',*,*,#6831,.T.);+#6831=EDGE_CURVE('',#1757,#2733,#6832,.T.);+#6832=LINE('',#6833,#72);+#6833=CARTESIAN_POINT('',(5.18,3.725,0.9));+#6834=ORIENTED_EDGE('',*,*,#2732,.F.);+#6835=ADVANCED_FACE('',(#6836),#6892,.F.);+#6836=FACE_BOUND('',#6837,.F.);+#6837=EDGE_LOOP('',(#6838,#6839,#6840,#6847,#6852,#6859,#6864,#6869,#6874,#6880,#6885,#6890));+#6838=ORIENTED_EDGE('',*,*,#1756,.F.);+#6839=ORIENTED_EDGE('',*,*,#1767,.T.);+#6840=ORIENTED_EDGE('',*,*,#6841,.T.);+#6841=EDGE_CURVE('',#1768,#6842,#6844,.T.);+#6842=VERTEX_POINT('',#6843);+#6843=CARTESIAN_POINT('',(5.278480775301,3.725,0.717364817767));+#6844=CIRCLE('',#6845,1.E-01);+#6845=AXIS2_PLACEMENT_3D('',#6846,#87,#6007);+#6846=CARTESIAN_POINT('',(5.18,3.725,0.7));+#6847=ORIENTED_EDGE('',*,*,#6848,.T.);+#6848=EDGE_CURVE('',#6842,#6849,#6851,.T.);+#6849=VERTEX_POINT('',#6850);+#6850=CARTESIAN_POINT('',(5.371201939752,3.725,0.165270364467));+#6851=LINE('',#6843,#6013);+#6852=ORIENTED_EDGE('',*,*,#6853,.T.);+#6853=EDGE_CURVE('',#6849,#6854,#6856,.T.);+#6854=VERTEX_POINT('',#6855);+#6855=CARTESIAN_POINT('',(5.568163490354,3.725,-1.387778780781E-16));+#6856=CIRCLE('',#6857,0.2);+#6857=AXIS2_PLACEMENT_3D('',#6858,#59,#6022);+#6858=CARTESIAN_POINT('',(5.568163490354,3.725,0.2));+#6859=ORIENTED_EDGE('',*,*,#6860,.T.);+#6860=EDGE_CURVE('',#6854,#6861,#6863,.T.);+#6861=VERTEX_POINT('',#6862);+#6862=CARTESIAN_POINT('',(5.83,3.725,-1.387778780781E-16));+#6863=LINE('',#6855,#27);+#6864=ORIENTED_EDGE('',*,*,#6865,.T.);+#6865=EDGE_CURVE('',#6861,#6866,#6868,.T.);+#6866=VERTEX_POINT('',#6867);+#6867=CARTESIAN_POINT('',(5.83,3.725,1.E-01));+#6868=LINE('',#6862,#658);+#6869=ORIENTED_EDGE('',*,*,#6870,.T.);+#6870=EDGE_CURVE('',#6866,#6871,#6873,.T.);+#6871=VERTEX_POINT('',#6872);+#6872=CARTESIAN_POINT('',(5.568163490354,3.725,0.1));+#6873=LINE('',#6867,#72);+#6874=ORIENTED_EDGE('',*,*,#6875,.T.);+#6875=EDGE_CURVE('',#6871,#6876,#6878,.T.);+#6876=VERTEX_POINT('',#6877);+#6877=CARTESIAN_POINT('',(5.469682715053,3.725,0.182635182233));+#6878=CIRCLE('',#6879,0.1);+#6879=AXIS2_PLACEMENT_3D('',#6858,#87,#6044);+#6880=ORIENTED_EDGE('',*,*,#6881,.T.);+#6881=EDGE_CURVE('',#6876,#6882,#6884,.T.);+#6882=VERTEX_POINT('',#6883);+#6883=CARTESIAN_POINT('',(5.376961550602,3.725,0.734729635533));+#6884=LINE('',#6877,#6050);+#6885=ORIENTED_EDGE('',*,*,#6886,.T.);+#6886=EDGE_CURVE('',#6882,#6887,#6888,.T.);+#6887=VERTEX_POINT('',#6833);+#6888=CIRCLE('',#6889,0.2);+#6889=AXIS2_PLACEMENT_3D('',#6846,#59,#6056);+#6890=ORIENTED_EDGE('',*,*,#6891,.T.);+#6891=EDGE_CURVE('',#6887,#1757,#6832,.T.);+#6892=PLANE('',#6893);+#6893=AXIS2_PLACEMENT_3D('',#6894,#59,#13);+#6894=CARTESIAN_POINT('',(5.377811491544,3.725,0.447016202907));+#6895=ADVANCED_FACE('',(#6896),#6910,.F.);+#6896=FACE_BOUND('',#6897,.F.);+#6897=EDGE_LOOP('',(#6898,#6899,#6906,#6909));+#6898=ORIENTED_EDGE('',*,*,#1780,.T.);+#6899=ORIENTED_EDGE('',*,*,#6900,.T.);+#6900=EDGE_CURVE('',#1775,#6901,#6903,.T.);+#6901=VERTEX_POINT('',#6902);+#6902=CARTESIAN_POINT('',(5.278480775301,3.475,0.717364817767));+#6903=CIRCLE('',#6904,1.E-01);+#6904=AXIS2_PLACEMENT_3D('',#6905,#87,#6007);+#6905=CARTESIAN_POINT('',(5.18,3.475,0.7));+#6906=ORIENTED_EDGE('',*,*,#6907,.F.);+#6907=EDGE_CURVE('',#6842,#6901,#6908,.T.);+#6908=LINE('',#6843,#58);+#6909=ORIENTED_EDGE('',*,*,#6841,.F.);+#6910=CYLINDRICAL_SURFACE('',#6845,1.E-01);+#6911=ADVANCED_FACE('',(#6912),#6961,.T.);+#6912=FACE_BOUND('',#6913,.T.);+#6913=EDGE_LOOP('',(#1787,#1773,#6899,#6914,#6919,#6926,#6931,#6936,#6941,#6947,#6952,#6958));+#6914=ORIENTED_EDGE('',*,*,#6915,.T.);+#6915=EDGE_CURVE('',#6901,#6916,#6918,.T.);+#6916=VERTEX_POINT('',#6917);+#6917=CARTESIAN_POINT('',(5.371201939752,3.475,0.165270364467));+#6918=LINE('',#6902,#6013);+#6919=ORIENTED_EDGE('',*,*,#6920,.T.);+#6920=EDGE_CURVE('',#6916,#6921,#6923,.T.);+#6921=VERTEX_POINT('',#6922);+#6922=CARTESIAN_POINT('',(5.568163490354,3.475,-1.387778780781E-16));+#6923=CIRCLE('',#6924,0.2);+#6924=AXIS2_PLACEMENT_3D('',#6925,#59,#6022);+#6925=CARTESIAN_POINT('',(5.568163490354,3.475,0.2));+#6926=ORIENTED_EDGE('',*,*,#6927,.T.);+#6927=EDGE_CURVE('',#6921,#6928,#6930,.T.);+#6928=VERTEX_POINT('',#6929);+#6929=CARTESIAN_POINT('',(5.83,3.475,-1.387778780781E-16));+#6930=LINE('',#6922,#27);+#6931=ORIENTED_EDGE('',*,*,#6932,.T.);+#6932=EDGE_CURVE('',#6928,#6933,#6935,.T.);+#6933=VERTEX_POINT('',#6934);+#6934=CARTESIAN_POINT('',(5.83,3.475,1.E-01));+#6935=LINE('',#6929,#658);+#6936=ORIENTED_EDGE('',*,*,#6937,.T.);+#6937=EDGE_CURVE('',#6933,#6938,#6940,.T.);+#6938=VERTEX_POINT('',#6939);+#6939=CARTESIAN_POINT('',(5.568163490354,3.475,0.1));+#6940=LINE('',#6934,#72);+#6941=ORIENTED_EDGE('',*,*,#6942,.T.);+#6942=EDGE_CURVE('',#6938,#6943,#6945,.T.);+#6943=VERTEX_POINT('',#6944);+#6944=CARTESIAN_POINT('',(5.469682715053,3.475,0.182635182233));+#6945=CIRCLE('',#6946,0.1);+#6946=AXIS2_PLACEMENT_3D('',#6925,#87,#6044);+#6947=ORIENTED_EDGE('',*,*,#6948,.T.);+#6948=EDGE_CURVE('',#6943,#6949,#6951,.T.);+#6949=VERTEX_POINT('',#6950);+#6950=CARTESIAN_POINT('',(5.376961550602,3.475,0.734729635533));+#6951=LINE('',#6944,#6050);+#6952=ORIENTED_EDGE('',*,*,#6953,.T.);+#6953=EDGE_CURVE('',#6949,#6954,#6956,.T.);+#6954=VERTEX_POINT('',#6955);+#6955=CARTESIAN_POINT('',(5.18,3.475,0.9));+#6956=CIRCLE('',#6957,0.2);+#6957=AXIS2_PLACEMENT_3D('',#6905,#59,#6056);+#6958=ORIENTED_EDGE('',*,*,#6959,.T.);+#6959=EDGE_CURVE('',#6954,#1789,#6960,.T.);+#6960=LINE('',#6955,#72);+#6961=PLANE('',#6962);+#6962=AXIS2_PLACEMENT_3D('',#6963,#59,#13);+#6963=CARTESIAN_POINT('',(5.377811491544,3.475,0.447016202907));+#6964=ADVANCED_FACE('',(#6965),#628,.F.);+#6965=FACE_BOUND('',#6966,.F.);+#6966=EDGE_LOOP('',(#6967,#6969,#6970,#6974));+#6967=ORIENTED_EDGE('',*,*,#6968,.F.);+#6968=EDGE_CURVE('',#1789,#2737,#6960,.T.);+#6969=ORIENTED_EDGE('',*,*,#1801,.T.);+#6970=ORIENTED_EDGE('',*,*,#6971,.T.);+#6971=EDGE_CURVE('',#1796,#2741,#6972,.T.);+#6972=LINE('',#6973,#72);+#6973=CARTESIAN_POINT('',(5.18,2.925,0.9));+#6974=ORIENTED_EDGE('',*,*,#2740,.F.);+#6975=ADVANCED_FACE('',(#6976),#7032,.F.);+#6976=FACE_BOUND('',#6977,.F.);+#6977=EDGE_LOOP('',(#6978,#6979,#6980,#6987,#6992,#6999,#7004,#7009,#7014,#7020,#7025,#7030));+#6978=ORIENTED_EDGE('',*,*,#1795,.F.);+#6979=ORIENTED_EDGE('',*,*,#1806,.T.);+#6980=ORIENTED_EDGE('',*,*,#6981,.T.);+#6981=EDGE_CURVE('',#1807,#6982,#6984,.T.);+#6982=VERTEX_POINT('',#6983);+#6983=CARTESIAN_POINT('',(5.278480775301,2.925,0.717364817767));+#6984=CIRCLE('',#6985,1.E-01);+#6985=AXIS2_PLACEMENT_3D('',#6986,#87,#6007);+#6986=CARTESIAN_POINT('',(5.18,2.925,0.7));+#6987=ORIENTED_EDGE('',*,*,#6988,.T.);+#6988=EDGE_CURVE('',#6982,#6989,#6991,.T.);+#6989=VERTEX_POINT('',#6990);+#6990=CARTESIAN_POINT('',(5.371201939752,2.925,0.165270364467));+#6991=LINE('',#6983,#6013);+#6992=ORIENTED_EDGE('',*,*,#6993,.T.);+#6993=EDGE_CURVE('',#6989,#6994,#6996,.T.);+#6994=VERTEX_POINT('',#6995);+#6995=CARTESIAN_POINT('',(5.568163490354,2.925,-1.387778780781E-16));+#6996=CIRCLE('',#6997,0.2);+#6997=AXIS2_PLACEMENT_3D('',#6998,#59,#6022);+#6998=CARTESIAN_POINT('',(5.568163490354,2.925,0.2));+#6999=ORIENTED_EDGE('',*,*,#7000,.T.);+#7000=EDGE_CURVE('',#6994,#7001,#7003,.T.);+#7001=VERTEX_POINT('',#7002);+#7002=CARTESIAN_POINT('',(5.83,2.925,-1.387778780781E-16));+#7003=LINE('',#6995,#27);+#7004=ORIENTED_EDGE('',*,*,#7005,.T.);+#7005=EDGE_CURVE('',#7001,#7006,#7008,.T.);+#7006=VERTEX_POINT('',#7007);+#7007=CARTESIAN_POINT('',(5.83,2.925,1.E-01));+#7008=LINE('',#7002,#658);+#7009=ORIENTED_EDGE('',*,*,#7010,.T.);+#7010=EDGE_CURVE('',#7006,#7011,#7013,.T.);+#7011=VERTEX_POINT('',#7012);+#7012=CARTESIAN_POINT('',(5.568163490354,2.925,0.1));+#7013=LINE('',#7007,#72);+#7014=ORIENTED_EDGE('',*,*,#7015,.T.);+#7015=EDGE_CURVE('',#7011,#7016,#7018,.T.);+#7016=VERTEX_POINT('',#7017);+#7017=CARTESIAN_POINT('',(5.469682715053,2.925,0.182635182233));+#7018=CIRCLE('',#7019,0.1);+#7019=AXIS2_PLACEMENT_3D('',#6998,#87,#6044);+#7020=ORIENTED_EDGE('',*,*,#7021,.T.);+#7021=EDGE_CURVE('',#7016,#7022,#7024,.T.);+#7022=VERTEX_POINT('',#7023);+#7023=CARTESIAN_POINT('',(5.376961550602,2.925,0.734729635533));+#7024=LINE('',#7017,#6050);+#7025=ORIENTED_EDGE('',*,*,#7026,.T.);+#7026=EDGE_CURVE('',#7022,#7027,#7028,.T.);+#7027=VERTEX_POINT('',#6973);+#7028=CIRCLE('',#7029,0.2);+#7029=AXIS2_PLACEMENT_3D('',#6986,#59,#6056);+#7030=ORIENTED_EDGE('',*,*,#7031,.T.);+#7031=EDGE_CURVE('',#7027,#1796,#6972,.T.);+#7032=PLANE('',#7033);+#7033=AXIS2_PLACEMENT_3D('',#7034,#59,#13);+#7034=CARTESIAN_POINT('',(5.377811491544,2.925,0.447016202907));+#7035=ADVANCED_FACE('',(#7036),#7050,.F.);+#7036=FACE_BOUND('',#7037,.F.);+#7037=EDGE_LOOP('',(#7038,#7039,#7046,#7049));+#7038=ORIENTED_EDGE('',*,*,#1819,.T.);+#7039=ORIENTED_EDGE('',*,*,#7040,.T.);+#7040=EDGE_CURVE('',#1814,#7041,#7043,.T.);+#7041=VERTEX_POINT('',#7042);+#7042=CARTESIAN_POINT('',(5.278480775301,2.675,0.717364817767));+#7043=CIRCLE('',#7044,1.E-01);+#7044=AXIS2_PLACEMENT_3D('',#7045,#87,#6007);+#7045=CARTESIAN_POINT('',(5.18,2.675,0.7));+#7046=ORIENTED_EDGE('',*,*,#7047,.F.);+#7047=EDGE_CURVE('',#6982,#7041,#7048,.T.);+#7048=LINE('',#6983,#58);+#7049=ORIENTED_EDGE('',*,*,#6981,.F.);+#7050=CYLINDRICAL_SURFACE('',#6985,1.E-01);+#7051=ADVANCED_FACE('',(#7052),#7101,.T.);+#7052=FACE_BOUND('',#7053,.T.);+#7053=EDGE_LOOP('',(#1826,#1812,#7039,#7054,#7059,#7066,#7071,#7076,#7081,#7087,#7092,#7098));+#7054=ORIENTED_EDGE('',*,*,#7055,.T.);+#7055=EDGE_CURVE('',#7041,#7056,#7058,.T.);+#7056=VERTEX_POINT('',#7057);+#7057=CARTESIAN_POINT('',(5.371201939752,2.675,0.165270364467));+#7058=LINE('',#7042,#6013);+#7059=ORIENTED_EDGE('',*,*,#7060,.T.);+#7060=EDGE_CURVE('',#7056,#7061,#7063,.T.);+#7061=VERTEX_POINT('',#7062);+#7062=CARTESIAN_POINT('',(5.568163490354,2.675,-1.387778780781E-16));+#7063=CIRCLE('',#7064,0.2);+#7064=AXIS2_PLACEMENT_3D('',#7065,#59,#6022);+#7065=CARTESIAN_POINT('',(5.568163490354,2.675,0.2));+#7066=ORIENTED_EDGE('',*,*,#7067,.T.);+#7067=EDGE_CURVE('',#7061,#7068,#7070,.T.);+#7068=VERTEX_POINT('',#7069);+#7069=CARTESIAN_POINT('',(5.83,2.675,-1.387778780781E-16));+#7070=LINE('',#7062,#27);+#7071=ORIENTED_EDGE('',*,*,#7072,.T.);+#7072=EDGE_CURVE('',#7068,#7073,#7075,.T.);+#7073=VERTEX_POINT('',#7074);+#7074=CARTESIAN_POINT('',(5.83,2.675,1.E-01));+#7075=LINE('',#7069,#658);+#7076=ORIENTED_EDGE('',*,*,#7077,.T.);+#7077=EDGE_CURVE('',#7073,#7078,#7080,.T.);+#7078=VERTEX_POINT('',#7079);+#7079=CARTESIAN_POINT('',(5.568163490354,2.675,0.1));+#7080=LINE('',#7074,#72);+#7081=ORIENTED_EDGE('',*,*,#7082,.T.);+#7082=EDGE_CURVE('',#7078,#7083,#7085,.T.);+#7083=VERTEX_POINT('',#7084);+#7084=CARTESIAN_POINT('',(5.469682715053,2.675,0.182635182233));+#7085=CIRCLE('',#7086,0.1);+#7086=AXIS2_PLACEMENT_3D('',#7065,#87,#6044);+#7087=ORIENTED_EDGE('',*,*,#7088,.T.);+#7088=EDGE_CURVE('',#7083,#7089,#7091,.T.);+#7089=VERTEX_POINT('',#7090);+#7090=CARTESIAN_POINT('',(5.376961550602,2.675,0.734729635533));+#7091=LINE('',#7084,#6050);+#7092=ORIENTED_EDGE('',*,*,#7093,.T.);+#7093=EDGE_CURVE('',#7089,#7094,#7096,.T.);+#7094=VERTEX_POINT('',#7095);+#7095=CARTESIAN_POINT('',(5.18,2.675,0.9));+#7096=CIRCLE('',#7097,0.2);+#7097=AXIS2_PLACEMENT_3D('',#7045,#59,#6056);+#7098=ORIENTED_EDGE('',*,*,#7099,.T.);+#7099=EDGE_CURVE('',#7094,#1828,#7100,.T.);+#7100=LINE('',#7095,#72);+#7101=PLANE('',#7102);+#7102=AXIS2_PLACEMENT_3D('',#7103,#59,#13);+#7103=CARTESIAN_POINT('',(5.377811491544,2.675,0.447016202907));+#7104=ADVANCED_FACE('',(#7105),#628,.F.);+#7105=FACE_BOUND('',#7106,.F.);+#7106=EDGE_LOOP('',(#7107,#7109,#7110,#7114));+#7107=ORIENTED_EDGE('',*,*,#7108,.F.);+#7108=EDGE_CURVE('',#1828,#2745,#7100,.T.);+#7109=ORIENTED_EDGE('',*,*,#1840,.T.);+#7110=ORIENTED_EDGE('',*,*,#7111,.T.);+#7111=EDGE_CURVE('',#1835,#2749,#7112,.T.);+#7112=LINE('',#7113,#72);+#7113=CARTESIAN_POINT('',(5.18,2.125,0.9));+#7114=ORIENTED_EDGE('',*,*,#2748,.F.);+#7115=ADVANCED_FACE('',(#7116),#7172,.F.);+#7116=FACE_BOUND('',#7117,.F.);+#7117=EDGE_LOOP('',(#7118,#7119,#7120,#7127,#7132,#7139,#7144,#7149,#7154,#7160,#7165,#7170));+#7118=ORIENTED_EDGE('',*,*,#1834,.F.);+#7119=ORIENTED_EDGE('',*,*,#1845,.T.);+#7120=ORIENTED_EDGE('',*,*,#7121,.T.);+#7121=EDGE_CURVE('',#1846,#7122,#7124,.T.);+#7122=VERTEX_POINT('',#7123);+#7123=CARTESIAN_POINT('',(5.278480775301,2.125,0.717364817767));+#7124=CIRCLE('',#7125,1.E-01);+#7125=AXIS2_PLACEMENT_3D('',#7126,#87,#6007);+#7126=CARTESIAN_POINT('',(5.18,2.125,0.7));+#7127=ORIENTED_EDGE('',*,*,#7128,.T.);+#7128=EDGE_CURVE('',#7122,#7129,#7131,.T.);+#7129=VERTEX_POINT('',#7130);+#7130=CARTESIAN_POINT('',(5.371201939752,2.125,0.165270364467));+#7131=LINE('',#7123,#6013);+#7132=ORIENTED_EDGE('',*,*,#7133,.T.);+#7133=EDGE_CURVE('',#7129,#7134,#7136,.T.);+#7134=VERTEX_POINT('',#7135);+#7135=CARTESIAN_POINT('',(5.568163490354,2.125,-1.387778780781E-16));+#7136=CIRCLE('',#7137,0.2);+#7137=AXIS2_PLACEMENT_3D('',#7138,#59,#6022);+#7138=CARTESIAN_POINT('',(5.568163490354,2.125,0.2));+#7139=ORIENTED_EDGE('',*,*,#7140,.T.);+#7140=EDGE_CURVE('',#7134,#7141,#7143,.T.);+#7141=VERTEX_POINT('',#7142);+#7142=CARTESIAN_POINT('',(5.83,2.125,-1.387778780781E-16));+#7143=LINE('',#7135,#27);+#7144=ORIENTED_EDGE('',*,*,#7145,.T.);+#7145=EDGE_CURVE('',#7141,#7146,#7148,.T.);+#7146=VERTEX_POINT('',#7147);+#7147=CARTESIAN_POINT('',(5.83,2.125,1.E-01));+#7148=LINE('',#7142,#658);+#7149=ORIENTED_EDGE('',*,*,#7150,.T.);+#7150=EDGE_CURVE('',#7146,#7151,#7153,.T.);+#7151=VERTEX_POINT('',#7152);+#7152=CARTESIAN_POINT('',(5.568163490354,2.125,0.1));+#7153=LINE('',#7147,#72);+#7154=ORIENTED_EDGE('',*,*,#7155,.T.);+#7155=EDGE_CURVE('',#7151,#7156,#7158,.T.);+#7156=VERTEX_POINT('',#7157);+#7157=CARTESIAN_POINT('',(5.469682715053,2.125,0.182635182233));+#7158=CIRCLE('',#7159,0.1);+#7159=AXIS2_PLACEMENT_3D('',#7138,#87,#6044);+#7160=ORIENTED_EDGE('',*,*,#7161,.T.);+#7161=EDGE_CURVE('',#7156,#7162,#7164,.T.);+#7162=VERTEX_POINT('',#7163);+#7163=CARTESIAN_POINT('',(5.376961550602,2.125,0.734729635533));+#7164=LINE('',#7157,#6050);+#7165=ORIENTED_EDGE('',*,*,#7166,.T.);+#7166=EDGE_CURVE('',#7162,#7167,#7168,.T.);+#7167=VERTEX_POINT('',#7113);+#7168=CIRCLE('',#7169,0.2);+#7169=AXIS2_PLACEMENT_3D('',#7126,#59,#6056);+#7170=ORIENTED_EDGE('',*,*,#7171,.T.);+#7171=EDGE_CURVE('',#7167,#1835,#7112,.T.);+#7172=PLANE('',#7173);+#7173=AXIS2_PLACEMENT_3D('',#7174,#59,#13);+#7174=CARTESIAN_POINT('',(5.377811491544,2.125,0.447016202907));+#7175=ADVANCED_FACE('',(#7176),#7190,.F.);+#7176=FACE_BOUND('',#7177,.F.);+#7177=EDGE_LOOP('',(#7178,#7179,#7186,#7189));+#7178=ORIENTED_EDGE('',*,*,#1858,.T.);+#7179=ORIENTED_EDGE('',*,*,#7180,.T.);+#7180=EDGE_CURVE('',#1853,#7181,#7183,.T.);+#7181=VERTEX_POINT('',#7182);+#7182=CARTESIAN_POINT('',(5.278480775301,1.875,0.717364817767));+#7183=CIRCLE('',#7184,1.E-01);+#7184=AXIS2_PLACEMENT_3D('',#7185,#87,#6007);+#7185=CARTESIAN_POINT('',(5.18,1.875,0.7));+#7186=ORIENTED_EDGE('',*,*,#7187,.F.);+#7187=EDGE_CURVE('',#7122,#7181,#7188,.T.);+#7188=LINE('',#7123,#58);+#7189=ORIENTED_EDGE('',*,*,#7121,.F.);+#7190=CYLINDRICAL_SURFACE('',#7125,1.E-01);+#7191=ADVANCED_FACE('',(#7192),#7241,.T.);+#7192=FACE_BOUND('',#7193,.T.);+#7193=EDGE_LOOP('',(#1865,#1851,#7179,#7194,#7199,#7206,#7211,#7216,#7221,#7227,#7232,#7238));+#7194=ORIENTED_EDGE('',*,*,#7195,.T.);+#7195=EDGE_CURVE('',#7181,#7196,#7198,.T.);+#7196=VERTEX_POINT('',#7197);+#7197=CARTESIAN_POINT('',(5.371201939752,1.875,0.165270364467));+#7198=LINE('',#7182,#6013);+#7199=ORIENTED_EDGE('',*,*,#7200,.T.);+#7200=EDGE_CURVE('',#7196,#7201,#7203,.T.);+#7201=VERTEX_POINT('',#7202);+#7202=CARTESIAN_POINT('',(5.568163490354,1.875,-1.387778780781E-16));+#7203=CIRCLE('',#7204,0.2);+#7204=AXIS2_PLACEMENT_3D('',#7205,#59,#6022);+#7205=CARTESIAN_POINT('',(5.568163490354,1.875,0.2));+#7206=ORIENTED_EDGE('',*,*,#7207,.T.);+#7207=EDGE_CURVE('',#7201,#7208,#7210,.T.);+#7208=VERTEX_POINT('',#7209);+#7209=CARTESIAN_POINT('',(5.83,1.875,-1.387778780781E-16));+#7210=LINE('',#7202,#27);+#7211=ORIENTED_EDGE('',*,*,#7212,.T.);+#7212=EDGE_CURVE('',#7208,#7213,#7215,.T.);+#7213=VERTEX_POINT('',#7214);+#7214=CARTESIAN_POINT('',(5.83,1.875,1.E-01));+#7215=LINE('',#7209,#658);+#7216=ORIENTED_EDGE('',*,*,#7217,.T.);+#7217=EDGE_CURVE('',#7213,#7218,#7220,.T.);+#7218=VERTEX_POINT('',#7219);+#7219=CARTESIAN_POINT('',(5.568163490354,1.875,0.1));+#7220=LINE('',#7214,#72);+#7221=ORIENTED_EDGE('',*,*,#7222,.T.);+#7222=EDGE_CURVE('',#7218,#7223,#7225,.T.);+#7223=VERTEX_POINT('',#7224);+#7224=CARTESIAN_POINT('',(5.469682715053,1.875,0.182635182233));+#7225=CIRCLE('',#7226,0.1);+#7226=AXIS2_PLACEMENT_3D('',#7205,#87,#6044);+#7227=ORIENTED_EDGE('',*,*,#7228,.T.);+#7228=EDGE_CURVE('',#7223,#7229,#7231,.T.);+#7229=VERTEX_POINT('',#7230);+#7230=CARTESIAN_POINT('',(5.376961550602,1.875,0.734729635533));+#7231=LINE('',#7224,#6050);+#7232=ORIENTED_EDGE('',*,*,#7233,.T.);+#7233=EDGE_CURVE('',#7229,#7234,#7236,.T.);+#7234=VERTEX_POINT('',#7235);+#7235=CARTESIAN_POINT('',(5.18,1.875,0.9));+#7236=CIRCLE('',#7237,0.2);+#7237=AXIS2_PLACEMENT_3D('',#7185,#59,#6056);+#7238=ORIENTED_EDGE('',*,*,#7239,.T.);+#7239=EDGE_CURVE('',#7234,#1867,#7240,.T.);+#7240=LINE('',#7235,#72);+#7241=PLANE('',#7242);+#7242=AXIS2_PLACEMENT_3D('',#7243,#59,#13);+#7243=CARTESIAN_POINT('',(5.377811491544,1.875,0.447016202907));+#7244=ADVANCED_FACE('',(#7245),#628,.F.);+#7245=FACE_BOUND('',#7246,.F.);+#7246=EDGE_LOOP('',(#7247,#7249,#7250,#7254));+#7247=ORIENTED_EDGE('',*,*,#7248,.F.);+#7248=EDGE_CURVE('',#1867,#2753,#7240,.T.);+#7249=ORIENTED_EDGE('',*,*,#1879,.T.);+#7250=ORIENTED_EDGE('',*,*,#7251,.T.);+#7251=EDGE_CURVE('',#1874,#2757,#7252,.T.);+#7252=LINE('',#7253,#72);+#7253=CARTESIAN_POINT('',(5.18,1.325,0.9));+#7254=ORIENTED_EDGE('',*,*,#2756,.F.);+#7255=ADVANCED_FACE('',(#7256),#7312,.F.);+#7256=FACE_BOUND('',#7257,.F.);+#7257=EDGE_LOOP('',(#7258,#7259,#7260,#7267,#7272,#7279,#7284,#7289,#7294,#7300,#7305,#7310));+#7258=ORIENTED_EDGE('',*,*,#1873,.F.);+#7259=ORIENTED_EDGE('',*,*,#1884,.T.);+#7260=ORIENTED_EDGE('',*,*,#7261,.T.);+#7261=EDGE_CURVE('',#1885,#7262,#7264,.T.);+#7262=VERTEX_POINT('',#7263);+#7263=CARTESIAN_POINT('',(5.278480775301,1.325,0.717364817767));+#7264=CIRCLE('',#7265,1.E-01);+#7265=AXIS2_PLACEMENT_3D('',#7266,#87,#6007);+#7266=CARTESIAN_POINT('',(5.18,1.325,0.7));+#7267=ORIENTED_EDGE('',*,*,#7268,.T.);+#7268=EDGE_CURVE('',#7262,#7269,#7271,.T.);+#7269=VERTEX_POINT('',#7270);+#7270=CARTESIAN_POINT('',(5.371201939752,1.325,0.165270364467));+#7271=LINE('',#7263,#6013);+#7272=ORIENTED_EDGE('',*,*,#7273,.T.);+#7273=EDGE_CURVE('',#7269,#7274,#7276,.T.);+#7274=VERTEX_POINT('',#7275);+#7275=CARTESIAN_POINT('',(5.568163490354,1.325,-1.387778780781E-16));+#7276=CIRCLE('',#7277,0.2);+#7277=AXIS2_PLACEMENT_3D('',#7278,#59,#6022);+#7278=CARTESIAN_POINT('',(5.568163490354,1.325,0.2));+#7279=ORIENTED_EDGE('',*,*,#7280,.T.);+#7280=EDGE_CURVE('',#7274,#7281,#7283,.T.);+#7281=VERTEX_POINT('',#7282);+#7282=CARTESIAN_POINT('',(5.83,1.325,-1.387778780781E-16));+#7283=LINE('',#7275,#27);+#7284=ORIENTED_EDGE('',*,*,#7285,.T.);+#7285=EDGE_CURVE('',#7281,#7286,#7288,.T.);+#7286=VERTEX_POINT('',#7287);+#7287=CARTESIAN_POINT('',(5.83,1.325,1.E-01));+#7288=LINE('',#7282,#658);+#7289=ORIENTED_EDGE('',*,*,#7290,.T.);+#7290=EDGE_CURVE('',#7286,#7291,#7293,.T.);+#7291=VERTEX_POINT('',#7292);+#7292=CARTESIAN_POINT('',(5.568163490354,1.325,0.1));+#7293=LINE('',#7287,#72);+#7294=ORIENTED_EDGE('',*,*,#7295,.T.);+#7295=EDGE_CURVE('',#7291,#7296,#7298,.T.);+#7296=VERTEX_POINT('',#7297);+#7297=CARTESIAN_POINT('',(5.469682715053,1.325,0.182635182233));+#7298=CIRCLE('',#7299,0.1);+#7299=AXIS2_PLACEMENT_3D('',#7278,#87,#6044);+#7300=ORIENTED_EDGE('',*,*,#7301,.T.);+#7301=EDGE_CURVE('',#7296,#7302,#7304,.T.);+#7302=VERTEX_POINT('',#7303);+#7303=CARTESIAN_POINT('',(5.376961550602,1.325,0.734729635533));+#7304=LINE('',#7297,#6050);+#7305=ORIENTED_EDGE('',*,*,#7306,.T.);+#7306=EDGE_CURVE('',#7302,#7307,#7308,.T.);+#7307=VERTEX_POINT('',#7253);+#7308=CIRCLE('',#7309,0.2);+#7309=AXIS2_PLACEMENT_3D('',#7266,#59,#6056);+#7310=ORIENTED_EDGE('',*,*,#7311,.T.);+#7311=EDGE_CURVE('',#7307,#1874,#7252,.T.);+#7312=PLANE('',#7313);+#7313=AXIS2_PLACEMENT_3D('',#7314,#59,#13);+#7314=CARTESIAN_POINT('',(5.377811491544,1.325,0.447016202907));+#7315=ADVANCED_FACE('',(#7316),#7330,.F.);+#7316=FACE_BOUND('',#7317,.F.);+#7317=EDGE_LOOP('',(#7318,#7319,#7326,#7329));+#7318=ORIENTED_EDGE('',*,*,#1897,.T.);+#7319=ORIENTED_EDGE('',*,*,#7320,.T.);+#7320=EDGE_CURVE('',#1892,#7321,#7323,.T.);+#7321=VERTEX_POINT('',#7322);+#7322=CARTESIAN_POINT('',(5.278480775301,1.075,0.717364817767));+#7323=CIRCLE('',#7324,1.E-01);+#7324=AXIS2_PLACEMENT_3D('',#7325,#87,#6007);+#7325=CARTESIAN_POINT('',(5.18,1.075,0.7));+#7326=ORIENTED_EDGE('',*,*,#7327,.F.);+#7327=EDGE_CURVE('',#7262,#7321,#7328,.T.);+#7328=LINE('',#7263,#58);+#7329=ORIENTED_EDGE('',*,*,#7261,.F.);+#7330=CYLINDRICAL_SURFACE('',#7265,1.E-01);+#7331=ADVANCED_FACE('',(#7332),#7381,.T.);+#7332=FACE_BOUND('',#7333,.T.);+#7333=EDGE_LOOP('',(#1904,#1890,#7319,#7334,#7339,#7346,#7351,#7356,#7361,#7367,#7372,#7378));+#7334=ORIENTED_EDGE('',*,*,#7335,.T.);+#7335=EDGE_CURVE('',#7321,#7336,#7338,.T.);+#7336=VERTEX_POINT('',#7337);+#7337=CARTESIAN_POINT('',(5.371201939752,1.075,0.165270364467));+#7338=LINE('',#7322,#6013);+#7339=ORIENTED_EDGE('',*,*,#7340,.T.);+#7340=EDGE_CURVE('',#7336,#7341,#7343,.T.);+#7341=VERTEX_POINT('',#7342);+#7342=CARTESIAN_POINT('',(5.568163490354,1.075,-1.387778780781E-16));+#7343=CIRCLE('',#7344,0.2);+#7344=AXIS2_PLACEMENT_3D('',#7345,#59,#6022);+#7345=CARTESIAN_POINT('',(5.568163490354,1.075,0.2));+#7346=ORIENTED_EDGE('',*,*,#7347,.T.);+#7347=EDGE_CURVE('',#7341,#7348,#7350,.T.);+#7348=VERTEX_POINT('',#7349);+#7349=CARTESIAN_POINT('',(5.83,1.075,-1.387778780781E-16));+#7350=LINE('',#7342,#27);+#7351=ORIENTED_EDGE('',*,*,#7352,.T.);+#7352=EDGE_CURVE('',#7348,#7353,#7355,.T.);+#7353=VERTEX_POINT('',#7354);+#7354=CARTESIAN_POINT('',(5.83,1.075,1.E-01));+#7355=LINE('',#7349,#658);+#7356=ORIENTED_EDGE('',*,*,#7357,.T.);+#7357=EDGE_CURVE('',#7353,#7358,#7360,.T.);+#7358=VERTEX_POINT('',#7359);+#7359=CARTESIAN_POINT('',(5.568163490354,1.075,0.1));+#7360=LINE('',#7354,#72);+#7361=ORIENTED_EDGE('',*,*,#7362,.T.);+#7362=EDGE_CURVE('',#7358,#7363,#7365,.T.);+#7363=VERTEX_POINT('',#7364);+#7364=CARTESIAN_POINT('',(5.469682715053,1.075,0.182635182233));+#7365=CIRCLE('',#7366,0.1);+#7366=AXIS2_PLACEMENT_3D('',#7345,#87,#6044);+#7367=ORIENTED_EDGE('',*,*,#7368,.T.);+#7368=EDGE_CURVE('',#7363,#7369,#7371,.T.);+#7369=VERTEX_POINT('',#7370);+#7370=CARTESIAN_POINT('',(5.376961550602,1.075,0.734729635533));+#7371=LINE('',#7364,#6050);+#7372=ORIENTED_EDGE('',*,*,#7373,.T.);+#7373=EDGE_CURVE('',#7369,#7374,#7376,.T.);+#7374=VERTEX_POINT('',#7375);+#7375=CARTESIAN_POINT('',(5.18,1.075,0.9));+#7376=CIRCLE('',#7377,0.2);+#7377=AXIS2_PLACEMENT_3D('',#7325,#59,#6056);+#7378=ORIENTED_EDGE('',*,*,#7379,.T.);+#7379=EDGE_CURVE('',#7374,#1906,#7380,.T.);+#7380=LINE('',#7375,#72);+#7381=PLANE('',#7382);+#7382=AXIS2_PLACEMENT_3D('',#7383,#59,#13);+#7383=CARTESIAN_POINT('',(5.377811491544,1.075,0.447016202907));+#7384=ADVANCED_FACE('',(#7385),#628,.F.);+#7385=FACE_BOUND('',#7386,.F.);+#7386=EDGE_LOOP('',(#7387,#7389,#7390,#7394));+#7387=ORIENTED_EDGE('',*,*,#7388,.F.);+#7388=EDGE_CURVE('',#1906,#2761,#7380,.T.);+#7389=ORIENTED_EDGE('',*,*,#1918,.T.);+#7390=ORIENTED_EDGE('',*,*,#7391,.T.);+#7391=EDGE_CURVE('',#1913,#2765,#7392,.T.);+#7392=LINE('',#7393,#72);+#7393=CARTESIAN_POINT('',(5.18,0.525,0.9));+#7394=ORIENTED_EDGE('',*,*,#2764,.F.);+#7395=ADVANCED_FACE('',(#7396),#7452,.F.);+#7396=FACE_BOUND('',#7397,.F.);+#7397=EDGE_LOOP('',(#7398,#7399,#7400,#7407,#7412,#7419,#7424,#7429,#7434,#7440,#7445,#7450));+#7398=ORIENTED_EDGE('',*,*,#1912,.F.);+#7399=ORIENTED_EDGE('',*,*,#1923,.T.);+#7400=ORIENTED_EDGE('',*,*,#7401,.T.);+#7401=EDGE_CURVE('',#1924,#7402,#7404,.T.);+#7402=VERTEX_POINT('',#7403);+#7403=CARTESIAN_POINT('',(5.278480775301,0.525,0.717364817767));+#7404=CIRCLE('',#7405,1.E-01);+#7405=AXIS2_PLACEMENT_3D('',#7406,#87,#6007);+#7406=CARTESIAN_POINT('',(5.18,0.525,0.7));+#7407=ORIENTED_EDGE('',*,*,#7408,.T.);+#7408=EDGE_CURVE('',#7402,#7409,#7411,.T.);+#7409=VERTEX_POINT('',#7410);+#7410=CARTESIAN_POINT('',(5.371201939752,0.525,0.165270364467));+#7411=LINE('',#7403,#6013);+#7412=ORIENTED_EDGE('',*,*,#7413,.T.);+#7413=EDGE_CURVE('',#7409,#7414,#7416,.T.);+#7414=VERTEX_POINT('',#7415);+#7415=CARTESIAN_POINT('',(5.568163490354,0.525,-1.387778780781E-16));+#7416=CIRCLE('',#7417,0.2);+#7417=AXIS2_PLACEMENT_3D('',#7418,#59,#6022);+#7418=CARTESIAN_POINT('',(5.568163490354,0.525,0.2));+#7419=ORIENTED_EDGE('',*,*,#7420,.T.);+#7420=EDGE_CURVE('',#7414,#7421,#7423,.T.);+#7421=VERTEX_POINT('',#7422);+#7422=CARTESIAN_POINT('',(5.83,0.525,-1.387778780781E-16));+#7423=LINE('',#7415,#27);+#7424=ORIENTED_EDGE('',*,*,#7425,.T.);+#7425=EDGE_CURVE('',#7421,#7426,#7428,.T.);+#7426=VERTEX_POINT('',#7427);+#7427=CARTESIAN_POINT('',(5.83,0.525,1.E-01));+#7428=LINE('',#7422,#658);+#7429=ORIENTED_EDGE('',*,*,#7430,.T.);+#7430=EDGE_CURVE('',#7426,#7431,#7433,.T.);+#7431=VERTEX_POINT('',#7432);+#7432=CARTESIAN_POINT('',(5.568163490354,0.525,0.1));+#7433=LINE('',#7427,#72);+#7434=ORIENTED_EDGE('',*,*,#7435,.T.);+#7435=EDGE_CURVE('',#7431,#7436,#7438,.T.);+#7436=VERTEX_POINT('',#7437);+#7437=CARTESIAN_POINT('',(5.469682715053,0.525,0.182635182233));+#7438=CIRCLE('',#7439,0.1);+#7439=AXIS2_PLACEMENT_3D('',#7418,#87,#6044);+#7440=ORIENTED_EDGE('',*,*,#7441,.T.);+#7441=EDGE_CURVE('',#7436,#7442,#7444,.T.);+#7442=VERTEX_POINT('',#7443);+#7443=CARTESIAN_POINT('',(5.376961550602,0.525,0.734729635533));+#7444=LINE('',#7437,#6050);+#7445=ORIENTED_EDGE('',*,*,#7446,.T.);+#7446=EDGE_CURVE('',#7442,#7447,#7448,.T.);+#7447=VERTEX_POINT('',#7393);+#7448=CIRCLE('',#7449,0.2);+#7449=AXIS2_PLACEMENT_3D('',#7406,#59,#6056);+#7450=ORIENTED_EDGE('',*,*,#7451,.T.);+#7451=EDGE_CURVE('',#7447,#1913,#7392,.T.);+#7452=PLANE('',#7453);+#7453=AXIS2_PLACEMENT_3D('',#7454,#59,#13);+#7454=CARTESIAN_POINT('',(5.377811491544,0.525,0.447016202907));+#7455=ADVANCED_FACE('',(#7456),#7470,.F.);+#7456=FACE_BOUND('',#7457,.F.);+#7457=EDGE_LOOP('',(#7458,#7459,#7466,#7469));+#7458=ORIENTED_EDGE('',*,*,#1936,.T.);+#7459=ORIENTED_EDGE('',*,*,#7460,.T.);+#7460=EDGE_CURVE('',#1931,#7461,#7463,.T.);+#7461=VERTEX_POINT('',#7462);+#7462=CARTESIAN_POINT('',(5.278480775301,0.275,0.717364817767));+#7463=CIRCLE('',#7464,1.E-01);+#7464=AXIS2_PLACEMENT_3D('',#7465,#87,#6007);+#7465=CARTESIAN_POINT('',(5.18,0.275,0.7));+#7466=ORIENTED_EDGE('',*,*,#7467,.F.);+#7467=EDGE_CURVE('',#7402,#7461,#7468,.T.);+#7468=LINE('',#7403,#58);+#7469=ORIENTED_EDGE('',*,*,#7401,.F.);+#7470=CYLINDRICAL_SURFACE('',#7405,1.E-01);+#7471=ADVANCED_FACE('',(#7472),#7521,.T.);+#7472=FACE_BOUND('',#7473,.T.);+#7473=EDGE_LOOP('',(#1943,#1929,#7459,#7474,#7479,#7486,#7491,#7496,#7501,#7507,#7512,#7518));+#7474=ORIENTED_EDGE('',*,*,#7475,.T.);+#7475=EDGE_CURVE('',#7461,#7476,#7478,.T.);+#7476=VERTEX_POINT('',#7477);+#7477=CARTESIAN_POINT('',(5.371201939752,0.275,0.165270364467));+#7478=LINE('',#7462,#6013);+#7479=ORIENTED_EDGE('',*,*,#7480,.T.);+#7480=EDGE_CURVE('',#7476,#7481,#7483,.T.);+#7481=VERTEX_POINT('',#7482);+#7482=CARTESIAN_POINT('',(5.568163490354,0.275,-1.387778780781E-16));+#7483=CIRCLE('',#7484,0.2);+#7484=AXIS2_PLACEMENT_3D('',#7485,#59,#6022);+#7485=CARTESIAN_POINT('',(5.568163490354,0.275,0.2));+#7486=ORIENTED_EDGE('',*,*,#7487,.T.);+#7487=EDGE_CURVE('',#7481,#7488,#7490,.T.);+#7488=VERTEX_POINT('',#7489);+#7489=CARTESIAN_POINT('',(5.83,0.275,-1.387778780781E-16));+#7490=LINE('',#7482,#27);+#7491=ORIENTED_EDGE('',*,*,#7492,.T.);+#7492=EDGE_CURVE('',#7488,#7493,#7495,.T.);+#7493=VERTEX_POINT('',#7494);+#7494=CARTESIAN_POINT('',(5.83,0.275,1.E-01));+#7495=LINE('',#7489,#658);+#7496=ORIENTED_EDGE('',*,*,#7497,.T.);+#7497=EDGE_CURVE('',#7493,#7498,#7500,.T.);+#7498=VERTEX_POINT('',#7499);+#7499=CARTESIAN_POINT('',(5.568163490354,0.275,0.1));+#7500=LINE('',#7494,#72);+#7501=ORIENTED_EDGE('',*,*,#7502,.T.);+#7502=EDGE_CURVE('',#7498,#7503,#7505,.T.);+#7503=VERTEX_POINT('',#7504);+#7504=CARTESIAN_POINT('',(5.469682715053,0.275,0.182635182233));+#7505=CIRCLE('',#7506,0.1);+#7506=AXIS2_PLACEMENT_3D('',#7485,#87,#6044);+#7507=ORIENTED_EDGE('',*,*,#7508,.T.);+#7508=EDGE_CURVE('',#7503,#7509,#7511,.T.);+#7509=VERTEX_POINT('',#7510);+#7510=CARTESIAN_POINT('',(5.376961550602,0.275,0.734729635533));+#7511=LINE('',#7504,#6050);+#7512=ORIENTED_EDGE('',*,*,#7513,.T.);+#7513=EDGE_CURVE('',#7509,#7514,#7516,.T.);+#7514=VERTEX_POINT('',#7515);+#7515=CARTESIAN_POINT('',(5.18,0.275,0.9));+#7516=CIRCLE('',#7517,0.2);+#7517=AXIS2_PLACEMENT_3D('',#7465,#59,#6056);+#7518=ORIENTED_EDGE('',*,*,#7519,.T.);+#7519=EDGE_CURVE('',#7514,#1945,#7520,.T.);+#7520=LINE('',#7515,#72);+#7521=PLANE('',#7522);+#7522=AXIS2_PLACEMENT_3D('',#7523,#59,#13);+#7523=CARTESIAN_POINT('',(5.377811491544,0.275,0.447016202907));+#7524=ADVANCED_FACE('',(#7525),#628,.F.);+#7525=FACE_BOUND('',#7526,.F.);+#7526=EDGE_LOOP('',(#7527,#7529,#7530,#7534));+#7527=ORIENTED_EDGE('',*,*,#7528,.F.);+#7528=EDGE_CURVE('',#1945,#2769,#7520,.T.);+#7529=ORIENTED_EDGE('',*,*,#1957,.T.);+#7530=ORIENTED_EDGE('',*,*,#7531,.T.);+#7531=EDGE_CURVE('',#1952,#2773,#7532,.T.);+#7532=LINE('',#7533,#72);+#7533=CARTESIAN_POINT('',(5.18,-0.275,0.9));+#7534=ORIENTED_EDGE('',*,*,#2772,.F.);+#7535=ADVANCED_FACE('',(#7536),#7592,.F.);+#7536=FACE_BOUND('',#7537,.F.);+#7537=EDGE_LOOP('',(#7538,#7539,#7540,#7547,#7552,#7559,#7564,#7569,#7574,#7580,#7585,#7590));+#7538=ORIENTED_EDGE('',*,*,#1951,.F.);+#7539=ORIENTED_EDGE('',*,*,#1962,.T.);+#7540=ORIENTED_EDGE('',*,*,#7541,.T.);+#7541=EDGE_CURVE('',#1963,#7542,#7544,.T.);+#7542=VERTEX_POINT('',#7543);+#7543=CARTESIAN_POINT('',(5.278480775301,-0.275,0.717364817767));+#7544=CIRCLE('',#7545,1.E-01);+#7545=AXIS2_PLACEMENT_3D('',#7546,#87,#6007);+#7546=CARTESIAN_POINT('',(5.18,-0.275,0.7));+#7547=ORIENTED_EDGE('',*,*,#7548,.T.);+#7548=EDGE_CURVE('',#7542,#7549,#7551,.T.);+#7549=VERTEX_POINT('',#7550);+#7550=CARTESIAN_POINT('',(5.371201939752,-0.275,0.165270364467));+#7551=LINE('',#7543,#6013);+#7552=ORIENTED_EDGE('',*,*,#7553,.T.);+#7553=EDGE_CURVE('',#7549,#7554,#7556,.T.);+#7554=VERTEX_POINT('',#7555);+#7555=CARTESIAN_POINT('',(5.568163490354,-0.275,-1.387778780781E-16));+#7556=CIRCLE('',#7557,0.2);+#7557=AXIS2_PLACEMENT_3D('',#7558,#59,#6022);+#7558=CARTESIAN_POINT('',(5.568163490354,-0.275,0.2));+#7559=ORIENTED_EDGE('',*,*,#7560,.T.);+#7560=EDGE_CURVE('',#7554,#7561,#7563,.T.);+#7561=VERTEX_POINT('',#7562);+#7562=CARTESIAN_POINT('',(5.83,-0.275,-1.387778780781E-16));+#7563=LINE('',#7555,#27);+#7564=ORIENTED_EDGE('',*,*,#7565,.T.);+#7565=EDGE_CURVE('',#7561,#7566,#7568,.T.);+#7566=VERTEX_POINT('',#7567);+#7567=CARTESIAN_POINT('',(5.83,-0.275,1.E-01));+#7568=LINE('',#7562,#658);+#7569=ORIENTED_EDGE('',*,*,#7570,.T.);+#7570=EDGE_CURVE('',#7566,#7571,#7573,.T.);+#7571=VERTEX_POINT('',#7572);+#7572=CARTESIAN_POINT('',(5.568163490354,-0.275,0.1));+#7573=LINE('',#7567,#72);+#7574=ORIENTED_EDGE('',*,*,#7575,.T.);+#7575=EDGE_CURVE('',#7571,#7576,#7578,.T.);+#7576=VERTEX_POINT('',#7577);+#7577=CARTESIAN_POINT('',(5.469682715053,-0.275,0.182635182233));+#7578=CIRCLE('',#7579,0.1);+#7579=AXIS2_PLACEMENT_3D('',#7558,#87,#6044);+#7580=ORIENTED_EDGE('',*,*,#7581,.T.);+#7581=EDGE_CURVE('',#7576,#7582,#7584,.T.);+#7582=VERTEX_POINT('',#7583);+#7583=CARTESIAN_POINT('',(5.376961550602,-0.275,0.734729635533));+#7584=LINE('',#7577,#6050);+#7585=ORIENTED_EDGE('',*,*,#7586,.T.);+#7586=EDGE_CURVE('',#7582,#7587,#7588,.T.);+#7587=VERTEX_POINT('',#7533);+#7588=CIRCLE('',#7589,0.2);+#7589=AXIS2_PLACEMENT_3D('',#7546,#59,#6056);+#7590=ORIENTED_EDGE('',*,*,#7591,.T.);+#7591=EDGE_CURVE('',#7587,#1952,#7532,.T.);+#7592=PLANE('',#7593);+#7593=AXIS2_PLACEMENT_3D('',#7594,#59,#13);+#7594=CARTESIAN_POINT('',(5.377811491544,-0.275,0.447016202907));+#7595=ADVANCED_FACE('',(#7596),#7610,.F.);+#7596=FACE_BOUND('',#7597,.F.);+#7597=EDGE_LOOP('',(#7598,#7599,#7606,#7609));+#7598=ORIENTED_EDGE('',*,*,#1975,.T.);+#7599=ORIENTED_EDGE('',*,*,#7600,.T.);+#7600=EDGE_CURVE('',#1970,#7601,#7603,.T.);+#7601=VERTEX_POINT('',#7602);+#7602=CARTESIAN_POINT('',(5.278480775301,-0.525,0.717364817767));+#7603=CIRCLE('',#7604,1.E-01);+#7604=AXIS2_PLACEMENT_3D('',#7605,#87,#6007);+#7605=CARTESIAN_POINT('',(5.18,-0.525,0.7));+#7606=ORIENTED_EDGE('',*,*,#7607,.F.);+#7607=EDGE_CURVE('',#7542,#7601,#7608,.T.);+#7608=LINE('',#7543,#58);+#7609=ORIENTED_EDGE('',*,*,#7541,.F.);+#7610=CYLINDRICAL_SURFACE('',#7545,1.E-01);+#7611=ADVANCED_FACE('',(#7612),#7661,.T.);+#7612=FACE_BOUND('',#7613,.T.);+#7613=EDGE_LOOP('',(#1982,#1968,#7599,#7614,#7619,#7626,#7631,#7636,#7641,#7647,#7652,#7658));+#7614=ORIENTED_EDGE('',*,*,#7615,.T.);+#7615=EDGE_CURVE('',#7601,#7616,#7618,.T.);+#7616=VERTEX_POINT('',#7617);+#7617=CARTESIAN_POINT('',(5.371201939752,-0.525,0.165270364467));+#7618=LINE('',#7602,#6013);+#7619=ORIENTED_EDGE('',*,*,#7620,.T.);+#7620=EDGE_CURVE('',#7616,#7621,#7623,.T.);+#7621=VERTEX_POINT('',#7622);+#7622=CARTESIAN_POINT('',(5.568163490354,-0.525,-1.387778780781E-16));+#7623=CIRCLE('',#7624,0.2);+#7624=AXIS2_PLACEMENT_3D('',#7625,#59,#6022);+#7625=CARTESIAN_POINT('',(5.568163490354,-0.525,0.2));+#7626=ORIENTED_EDGE('',*,*,#7627,.T.);+#7627=EDGE_CURVE('',#7621,#7628,#7630,.T.);+#7628=VERTEX_POINT('',#7629);+#7629=CARTESIAN_POINT('',(5.83,-0.525,-1.387778780781E-16));+#7630=LINE('',#7622,#27);+#7631=ORIENTED_EDGE('',*,*,#7632,.T.);+#7632=EDGE_CURVE('',#7628,#7633,#7635,.T.);+#7633=VERTEX_POINT('',#7634);+#7634=CARTESIAN_POINT('',(5.83,-0.525,1.E-01));+#7635=LINE('',#7629,#658);+#7636=ORIENTED_EDGE('',*,*,#7637,.T.);+#7637=EDGE_CURVE('',#7633,#7638,#7640,.T.);+#7638=VERTEX_POINT('',#7639);+#7639=CARTESIAN_POINT('',(5.568163490354,-0.525,0.1));+#7640=LINE('',#7634,#72);+#7641=ORIENTED_EDGE('',*,*,#7642,.T.);+#7642=EDGE_CURVE('',#7638,#7643,#7645,.T.);+#7643=VERTEX_POINT('',#7644);+#7644=CARTESIAN_POINT('',(5.469682715053,-0.525,0.182635182233));+#7645=CIRCLE('',#7646,0.1);+#7646=AXIS2_PLACEMENT_3D('',#7625,#87,#6044);+#7647=ORIENTED_EDGE('',*,*,#7648,.T.);+#7648=EDGE_CURVE('',#7643,#7649,#7651,.T.);+#7649=VERTEX_POINT('',#7650);+#7650=CARTESIAN_POINT('',(5.376961550602,-0.525,0.734729635533));+#7651=LINE('',#7644,#6050);+#7652=ORIENTED_EDGE('',*,*,#7653,.T.);+#7653=EDGE_CURVE('',#7649,#7654,#7656,.T.);+#7654=VERTEX_POINT('',#7655);+#7655=CARTESIAN_POINT('',(5.18,-0.525,0.9));+#7656=CIRCLE('',#7657,0.2);+#7657=AXIS2_PLACEMENT_3D('',#7605,#59,#6056);+#7658=ORIENTED_EDGE('',*,*,#7659,.T.);+#7659=EDGE_CURVE('',#7654,#1984,#7660,.T.);+#7660=LINE('',#7655,#72);+#7661=PLANE('',#7662);+#7662=AXIS2_PLACEMENT_3D('',#7663,#59,#13);+#7663=CARTESIAN_POINT('',(5.377811491544,-0.525,0.447016202907));+#7664=ADVANCED_FACE('',(#7665),#628,.F.);+#7665=FACE_BOUND('',#7666,.F.);+#7666=EDGE_LOOP('',(#7667,#7669,#7670,#7674));+#7667=ORIENTED_EDGE('',*,*,#7668,.F.);+#7668=EDGE_CURVE('',#1984,#2777,#7660,.T.);+#7669=ORIENTED_EDGE('',*,*,#1996,.T.);+#7670=ORIENTED_EDGE('',*,*,#7671,.T.);+#7671=EDGE_CURVE('',#1991,#2781,#7672,.T.);+#7672=LINE('',#7673,#72);+#7673=CARTESIAN_POINT('',(5.18,-1.075,0.9));+#7674=ORIENTED_EDGE('',*,*,#2780,.F.);+#7675=ADVANCED_FACE('',(#7676),#7732,.F.);+#7676=FACE_BOUND('',#7677,.F.);+#7677=EDGE_LOOP('',(#7678,#7679,#7680,#7687,#7692,#7699,#7704,#7709,#7714,#7720,#7725,#7730));+#7678=ORIENTED_EDGE('',*,*,#1990,.F.);+#7679=ORIENTED_EDGE('',*,*,#2001,.T.);+#7680=ORIENTED_EDGE('',*,*,#7681,.T.);+#7681=EDGE_CURVE('',#2002,#7682,#7684,.T.);+#7682=VERTEX_POINT('',#7683);+#7683=CARTESIAN_POINT('',(5.278480775301,-1.075,0.717364817767));+#7684=CIRCLE('',#7685,1.E-01);+#7685=AXIS2_PLACEMENT_3D('',#7686,#87,#6007);+#7686=CARTESIAN_POINT('',(5.18,-1.075,0.7));+#7687=ORIENTED_EDGE('',*,*,#7688,.T.);+#7688=EDGE_CURVE('',#7682,#7689,#7691,.T.);+#7689=VERTEX_POINT('',#7690);+#7690=CARTESIAN_POINT('',(5.371201939752,-1.075,0.165270364467));+#7691=LINE('',#7683,#6013);+#7692=ORIENTED_EDGE('',*,*,#7693,.T.);+#7693=EDGE_CURVE('',#7689,#7694,#7696,.T.);+#7694=VERTEX_POINT('',#7695);+#7695=CARTESIAN_POINT('',(5.568163490354,-1.075,-1.387778780781E-16));+#7696=CIRCLE('',#7697,0.2);+#7697=AXIS2_PLACEMENT_3D('',#7698,#59,#6022);+#7698=CARTESIAN_POINT('',(5.568163490354,-1.075,0.2));+#7699=ORIENTED_EDGE('',*,*,#7700,.T.);+#7700=EDGE_CURVE('',#7694,#7701,#7703,.T.);+#7701=VERTEX_POINT('',#7702);+#7702=CARTESIAN_POINT('',(5.83,-1.075,-1.387778780781E-16));+#7703=LINE('',#7695,#27);+#7704=ORIENTED_EDGE('',*,*,#7705,.T.);+#7705=EDGE_CURVE('',#7701,#7706,#7708,.T.);+#7706=VERTEX_POINT('',#7707);+#7707=CARTESIAN_POINT('',(5.83,-1.075,1.E-01));+#7708=LINE('',#7702,#658);+#7709=ORIENTED_EDGE('',*,*,#7710,.T.);+#7710=EDGE_CURVE('',#7706,#7711,#7713,.T.);+#7711=VERTEX_POINT('',#7712);+#7712=CARTESIAN_POINT('',(5.568163490354,-1.075,0.1));+#7713=LINE('',#7707,#72);+#7714=ORIENTED_EDGE('',*,*,#7715,.T.);+#7715=EDGE_CURVE('',#7711,#7716,#7718,.T.);+#7716=VERTEX_POINT('',#7717);+#7717=CARTESIAN_POINT('',(5.469682715053,-1.075,0.182635182233));+#7718=CIRCLE('',#7719,0.1);+#7719=AXIS2_PLACEMENT_3D('',#7698,#87,#6044);+#7720=ORIENTED_EDGE('',*,*,#7721,.T.);+#7721=EDGE_CURVE('',#7716,#7722,#7724,.T.);+#7722=VERTEX_POINT('',#7723);+#7723=CARTESIAN_POINT('',(5.376961550602,-1.075,0.734729635533));+#7724=LINE('',#7717,#6050);+#7725=ORIENTED_EDGE('',*,*,#7726,.T.);+#7726=EDGE_CURVE('',#7722,#7727,#7728,.T.);+#7727=VERTEX_POINT('',#7673);+#7728=CIRCLE('',#7729,0.2);+#7729=AXIS2_PLACEMENT_3D('',#7686,#59,#6056);+#7730=ORIENTED_EDGE('',*,*,#7731,.T.);+#7731=EDGE_CURVE('',#7727,#1991,#7672,.T.);+#7732=PLANE('',#7733);+#7733=AXIS2_PLACEMENT_3D('',#7734,#59,#13);+#7734=CARTESIAN_POINT('',(5.377811491544,-1.075,0.447016202907));+#7735=ADVANCED_FACE('',(#7736),#7750,.F.);+#7736=FACE_BOUND('',#7737,.F.);+#7737=EDGE_LOOP('',(#7738,#7739,#7746,#7749));+#7738=ORIENTED_EDGE('',*,*,#2014,.T.);+#7739=ORIENTED_EDGE('',*,*,#7740,.T.);+#7740=EDGE_CURVE('',#2009,#7741,#7743,.T.);+#7741=VERTEX_POINT('',#7742);+#7742=CARTESIAN_POINT('',(5.278480775301,-1.325,0.717364817767));+#7743=CIRCLE('',#7744,1.E-01);+#7744=AXIS2_PLACEMENT_3D('',#7745,#87,#6007);+#7745=CARTESIAN_POINT('',(5.18,-1.325,0.7));+#7746=ORIENTED_EDGE('',*,*,#7747,.F.);+#7747=EDGE_CURVE('',#7682,#7741,#7748,.T.);+#7748=LINE('',#7683,#58);+#7749=ORIENTED_EDGE('',*,*,#7681,.F.);+#7750=CYLINDRICAL_SURFACE('',#7685,1.E-01);+#7751=ADVANCED_FACE('',(#7752),#7801,.T.);+#7752=FACE_BOUND('',#7753,.T.);+#7753=EDGE_LOOP('',(#2021,#2007,#7739,#7754,#7759,#7766,#7771,#7776,#7781,#7787,#7792,#7798));+#7754=ORIENTED_EDGE('',*,*,#7755,.T.);+#7755=EDGE_CURVE('',#7741,#7756,#7758,.T.);+#7756=VERTEX_POINT('',#7757);+#7757=CARTESIAN_POINT('',(5.371201939752,-1.325,0.165270364467));+#7758=LINE('',#7742,#6013);+#7759=ORIENTED_EDGE('',*,*,#7760,.T.);+#7760=EDGE_CURVE('',#7756,#7761,#7763,.T.);+#7761=VERTEX_POINT('',#7762);+#7762=CARTESIAN_POINT('',(5.568163490354,-1.325,-1.387778780781E-16));+#7763=CIRCLE('',#7764,0.2);+#7764=AXIS2_PLACEMENT_3D('',#7765,#59,#6022);+#7765=CARTESIAN_POINT('',(5.568163490354,-1.325,0.2));+#7766=ORIENTED_EDGE('',*,*,#7767,.T.);+#7767=EDGE_CURVE('',#7761,#7768,#7770,.T.);+#7768=VERTEX_POINT('',#7769);+#7769=CARTESIAN_POINT('',(5.83,-1.325,-1.387778780781E-16));+#7770=LINE('',#7762,#27);+#7771=ORIENTED_EDGE('',*,*,#7772,.T.);+#7772=EDGE_CURVE('',#7768,#7773,#7775,.T.);+#7773=VERTEX_POINT('',#7774);+#7774=CARTESIAN_POINT('',(5.83,-1.325,1.E-01));+#7775=LINE('',#7769,#658);+#7776=ORIENTED_EDGE('',*,*,#7777,.T.);+#7777=EDGE_CURVE('',#7773,#7778,#7780,.T.);+#7778=VERTEX_POINT('',#7779);+#7779=CARTESIAN_POINT('',(5.568163490354,-1.325,0.1));+#7780=LINE('',#7774,#72);+#7781=ORIENTED_EDGE('',*,*,#7782,.T.);+#7782=EDGE_CURVE('',#7778,#7783,#7785,.T.);+#7783=VERTEX_POINT('',#7784);+#7784=CARTESIAN_POINT('',(5.469682715053,-1.325,0.182635182233));+#7785=CIRCLE('',#7786,0.1);+#7786=AXIS2_PLACEMENT_3D('',#7765,#87,#6044);+#7787=ORIENTED_EDGE('',*,*,#7788,.T.);+#7788=EDGE_CURVE('',#7783,#7789,#7791,.T.);+#7789=VERTEX_POINT('',#7790);+#7790=CARTESIAN_POINT('',(5.376961550602,-1.325,0.734729635533));+#7791=LINE('',#7784,#6050);+#7792=ORIENTED_EDGE('',*,*,#7793,.T.);+#7793=EDGE_CURVE('',#7789,#7794,#7796,.T.);+#7794=VERTEX_POINT('',#7795);+#7795=CARTESIAN_POINT('',(5.18,-1.325,0.9));+#7796=CIRCLE('',#7797,0.2);+#7797=AXIS2_PLACEMENT_3D('',#7745,#59,#6056);+#7798=ORIENTED_EDGE('',*,*,#7799,.T.);+#7799=EDGE_CURVE('',#7794,#2023,#7800,.T.);+#7800=LINE('',#7795,#72);+#7801=PLANE('',#7802);+#7802=AXIS2_PLACEMENT_3D('',#7803,#59,#13);+#7803=CARTESIAN_POINT('',(5.377811491544,-1.325,0.447016202907));+#7804=ADVANCED_FACE('',(#7805),#628,.F.);+#7805=FACE_BOUND('',#7806,.F.);+#7806=EDGE_LOOP('',(#7807,#7809,#7810,#7814));+#7807=ORIENTED_EDGE('',*,*,#7808,.F.);+#7808=EDGE_CURVE('',#2023,#2785,#7800,.T.);+#7809=ORIENTED_EDGE('',*,*,#2035,.T.);+#7810=ORIENTED_EDGE('',*,*,#7811,.T.);+#7811=EDGE_CURVE('',#2030,#2789,#7812,.T.);+#7812=LINE('',#7813,#72);+#7813=CARTESIAN_POINT('',(5.18,-1.875,0.9));+#7814=ORIENTED_EDGE('',*,*,#2788,.F.);+#7815=ADVANCED_FACE('',(#7816),#7872,.F.);+#7816=FACE_BOUND('',#7817,.F.);+#7817=EDGE_LOOP('',(#7818,#7819,#7820,#7827,#7832,#7839,#7844,#7849,#7854,#7860,#7865,#7870));+#7818=ORIENTED_EDGE('',*,*,#2029,.F.);+#7819=ORIENTED_EDGE('',*,*,#2040,.T.);+#7820=ORIENTED_EDGE('',*,*,#7821,.T.);+#7821=EDGE_CURVE('',#2041,#7822,#7824,.T.);+#7822=VERTEX_POINT('',#7823);+#7823=CARTESIAN_POINT('',(5.278480775301,-1.875,0.717364817767));+#7824=CIRCLE('',#7825,1.E-01);+#7825=AXIS2_PLACEMENT_3D('',#7826,#87,#6007);+#7826=CARTESIAN_POINT('',(5.18,-1.875,0.7));+#7827=ORIENTED_EDGE('',*,*,#7828,.T.);+#7828=EDGE_CURVE('',#7822,#7829,#7831,.T.);+#7829=VERTEX_POINT('',#7830);+#7830=CARTESIAN_POINT('',(5.371201939752,-1.875,0.165270364467));+#7831=LINE('',#7823,#6013);+#7832=ORIENTED_EDGE('',*,*,#7833,.T.);+#7833=EDGE_CURVE('',#7829,#7834,#7836,.T.);+#7834=VERTEX_POINT('',#7835);+#7835=CARTESIAN_POINT('',(5.568163490354,-1.875,-1.387778780781E-16));+#7836=CIRCLE('',#7837,0.2);+#7837=AXIS2_PLACEMENT_3D('',#7838,#59,#6022);+#7838=CARTESIAN_POINT('',(5.568163490354,-1.875,0.2));+#7839=ORIENTED_EDGE('',*,*,#7840,.T.);+#7840=EDGE_CURVE('',#7834,#7841,#7843,.T.);+#7841=VERTEX_POINT('',#7842);+#7842=CARTESIAN_POINT('',(5.83,-1.875,-1.387778780781E-16));+#7843=LINE('',#7835,#27);+#7844=ORIENTED_EDGE('',*,*,#7845,.T.);+#7845=EDGE_CURVE('',#7841,#7846,#7848,.T.);+#7846=VERTEX_POINT('',#7847);+#7847=CARTESIAN_POINT('',(5.83,-1.875,1.E-01));+#7848=LINE('',#7842,#658);+#7849=ORIENTED_EDGE('',*,*,#7850,.T.);+#7850=EDGE_CURVE('',#7846,#7851,#7853,.T.);+#7851=VERTEX_POINT('',#7852);+#7852=CARTESIAN_POINT('',(5.568163490354,-1.875,0.1));+#7853=LINE('',#7847,#72);+#7854=ORIENTED_EDGE('',*,*,#7855,.T.);+#7855=EDGE_CURVE('',#7851,#7856,#7858,.T.);+#7856=VERTEX_POINT('',#7857);+#7857=CARTESIAN_POINT('',(5.469682715053,-1.875,0.182635182233));+#7858=CIRCLE('',#7859,0.1);+#7859=AXIS2_PLACEMENT_3D('',#7838,#87,#6044);+#7860=ORIENTED_EDGE('',*,*,#7861,.T.);+#7861=EDGE_CURVE('',#7856,#7862,#7864,.T.);+#7862=VERTEX_POINT('',#7863);+#7863=CARTESIAN_POINT('',(5.376961550602,-1.875,0.734729635533));+#7864=LINE('',#7857,#6050);+#7865=ORIENTED_EDGE('',*,*,#7866,.T.);+#7866=EDGE_CURVE('',#7862,#7867,#7868,.T.);+#7867=VERTEX_POINT('',#7813);+#7868=CIRCLE('',#7869,0.2);+#7869=AXIS2_PLACEMENT_3D('',#7826,#59,#6056);+#7870=ORIENTED_EDGE('',*,*,#7871,.T.);+#7871=EDGE_CURVE('',#7867,#2030,#7812,.T.);+#7872=PLANE('',#7873);+#7873=AXIS2_PLACEMENT_3D('',#7874,#59,#13);+#7874=CARTESIAN_POINT('',(5.377811491544,-1.875,0.447016202907));+#7875=ADVANCED_FACE('',(#7876),#7890,.F.);+#7876=FACE_BOUND('',#7877,.F.);+#7877=EDGE_LOOP('',(#7878,#7879,#7886,#7889));+#7878=ORIENTED_EDGE('',*,*,#2053,.T.);+#7879=ORIENTED_EDGE('',*,*,#7880,.T.);+#7880=EDGE_CURVE('',#2048,#7881,#7883,.T.);+#7881=VERTEX_POINT('',#7882);+#7882=CARTESIAN_POINT('',(5.278480775301,-2.125,0.717364817767));+#7883=CIRCLE('',#7884,1.E-01);+#7884=AXIS2_PLACEMENT_3D('',#7885,#87,#6007);+#7885=CARTESIAN_POINT('',(5.18,-2.125,0.7));+#7886=ORIENTED_EDGE('',*,*,#7887,.F.);+#7887=EDGE_CURVE('',#7822,#7881,#7888,.T.);+#7888=LINE('',#7823,#58);+#7889=ORIENTED_EDGE('',*,*,#7821,.F.);+#7890=CYLINDRICAL_SURFACE('',#7825,1.E-01);+#7891=ADVANCED_FACE('',(#7892),#7941,.T.);+#7892=FACE_BOUND('',#7893,.T.);+#7893=EDGE_LOOP('',(#2060,#2046,#7879,#7894,#7899,#7906,#7911,#7916,#7921,#7927,#7932,#7938));+#7894=ORIENTED_EDGE('',*,*,#7895,.T.);+#7895=EDGE_CURVE('',#7881,#7896,#7898,.T.);+#7896=VERTEX_POINT('',#7897);+#7897=CARTESIAN_POINT('',(5.371201939752,-2.125,0.165270364467));+#7898=LINE('',#7882,#6013);+#7899=ORIENTED_EDGE('',*,*,#7900,.T.);+#7900=EDGE_CURVE('',#7896,#7901,#7903,.T.);+#7901=VERTEX_POINT('',#7902);+#7902=CARTESIAN_POINT('',(5.568163490354,-2.125,-1.387778780781E-16));+#7903=CIRCLE('',#7904,0.2);+#7904=AXIS2_PLACEMENT_3D('',#7905,#59,#6022);+#7905=CARTESIAN_POINT('',(5.568163490354,-2.125,0.2));+#7906=ORIENTED_EDGE('',*,*,#7907,.T.);+#7907=EDGE_CURVE('',#7901,#7908,#7910,.T.);+#7908=VERTEX_POINT('',#7909);+#7909=CARTESIAN_POINT('',(5.83,-2.125,-1.387778780781E-16));+#7910=LINE('',#7902,#27);+#7911=ORIENTED_EDGE('',*,*,#7912,.T.);+#7912=EDGE_CURVE('',#7908,#7913,#7915,.T.);+#7913=VERTEX_POINT('',#7914);+#7914=CARTESIAN_POINT('',(5.83,-2.125,1.E-01));+#7915=LINE('',#7909,#658);+#7916=ORIENTED_EDGE('',*,*,#7917,.T.);+#7917=EDGE_CURVE('',#7913,#7918,#7920,.T.);+#7918=VERTEX_POINT('',#7919);+#7919=CARTESIAN_POINT('',(5.568163490354,-2.125,0.1));+#7920=LINE('',#7914,#72);+#7921=ORIENTED_EDGE('',*,*,#7922,.T.);+#7922=EDGE_CURVE('',#7918,#7923,#7925,.T.);+#7923=VERTEX_POINT('',#7924);+#7924=CARTESIAN_POINT('',(5.469682715053,-2.125,0.182635182233));+#7925=CIRCLE('',#7926,0.1);+#7926=AXIS2_PLACEMENT_3D('',#7905,#87,#6044);+#7927=ORIENTED_EDGE('',*,*,#7928,.T.);+#7928=EDGE_CURVE('',#7923,#7929,#7931,.T.);+#7929=VERTEX_POINT('',#7930);+#7930=CARTESIAN_POINT('',(5.376961550602,-2.125,0.734729635533));+#7931=LINE('',#7924,#6050);+#7932=ORIENTED_EDGE('',*,*,#7933,.T.);+#7933=EDGE_CURVE('',#7929,#7934,#7936,.T.);+#7934=VERTEX_POINT('',#7935);+#7935=CARTESIAN_POINT('',(5.18,-2.125,0.9));+#7936=CIRCLE('',#7937,0.2);+#7937=AXIS2_PLACEMENT_3D('',#7885,#59,#6056);+#7938=ORIENTED_EDGE('',*,*,#7939,.T.);+#7939=EDGE_CURVE('',#7934,#2062,#7940,.T.);+#7940=LINE('',#7935,#72);+#7941=PLANE('',#7942);+#7942=AXIS2_PLACEMENT_3D('',#7943,#59,#13);+#7943=CARTESIAN_POINT('',(5.377811491544,-2.125,0.447016202907));+#7944=ADVANCED_FACE('',(#7945),#628,.F.);+#7945=FACE_BOUND('',#7946,.F.);+#7946=EDGE_LOOP('',(#7947,#7949,#7950,#7954));+#7947=ORIENTED_EDGE('',*,*,#7948,.F.);+#7948=EDGE_CURVE('',#2062,#2793,#7940,.T.);+#7949=ORIENTED_EDGE('',*,*,#2074,.T.);+#7950=ORIENTED_EDGE('',*,*,#7951,.T.);+#7951=EDGE_CURVE('',#2069,#2797,#7952,.T.);+#7952=LINE('',#7953,#72);+#7953=CARTESIAN_POINT('',(5.18,-2.675,0.9));+#7954=ORIENTED_EDGE('',*,*,#2796,.F.);+#7955=ADVANCED_FACE('',(#7956),#8012,.F.);+#7956=FACE_BOUND('',#7957,.F.);+#7957=EDGE_LOOP('',(#7958,#7959,#7960,#7967,#7972,#7979,#7984,#7989,#7994,#8000,#8005,#8010));+#7958=ORIENTED_EDGE('',*,*,#2068,.F.);+#7959=ORIENTED_EDGE('',*,*,#2079,.T.);+#7960=ORIENTED_EDGE('',*,*,#7961,.T.);+#7961=EDGE_CURVE('',#2080,#7962,#7964,.T.);+#7962=VERTEX_POINT('',#7963);+#7963=CARTESIAN_POINT('',(5.278480775301,-2.675,0.717364817767));+#7964=CIRCLE('',#7965,1.E-01);+#7965=AXIS2_PLACEMENT_3D('',#7966,#87,#6007);+#7966=CARTESIAN_POINT('',(5.18,-2.675,0.7));+#7967=ORIENTED_EDGE('',*,*,#7968,.T.);+#7968=EDGE_CURVE('',#7962,#7969,#7971,.T.);+#7969=VERTEX_POINT('',#7970);+#7970=CARTESIAN_POINT('',(5.371201939752,-2.675,0.165270364467));+#7971=LINE('',#7963,#6013);+#7972=ORIENTED_EDGE('',*,*,#7973,.T.);+#7973=EDGE_CURVE('',#7969,#7974,#7976,.T.);+#7974=VERTEX_POINT('',#7975);+#7975=CARTESIAN_POINT('',(5.568163490354,-2.675,-1.387778780781E-16));+#7976=CIRCLE('',#7977,0.2);+#7977=AXIS2_PLACEMENT_3D('',#7978,#59,#6022);+#7978=CARTESIAN_POINT('',(5.568163490354,-2.675,0.2));+#7979=ORIENTED_EDGE('',*,*,#7980,.T.);+#7980=EDGE_CURVE('',#7974,#7981,#7983,.T.);+#7981=VERTEX_POINT('',#7982);+#7982=CARTESIAN_POINT('',(5.83,-2.675,-1.387778780781E-16));+#7983=LINE('',#7975,#27);+#7984=ORIENTED_EDGE('',*,*,#7985,.T.);+#7985=EDGE_CURVE('',#7981,#7986,#7988,.T.);+#7986=VERTEX_POINT('',#7987);+#7987=CARTESIAN_POINT('',(5.83,-2.675,1.E-01));+#7988=LINE('',#7982,#658);+#7989=ORIENTED_EDGE('',*,*,#7990,.T.);+#7990=EDGE_CURVE('',#7986,#7991,#7993,.T.);+#7991=VERTEX_POINT('',#7992);+#7992=CARTESIAN_POINT('',(5.568163490354,-2.675,0.1));+#7993=LINE('',#7987,#72);+#7994=ORIENTED_EDGE('',*,*,#7995,.T.);+#7995=EDGE_CURVE('',#7991,#7996,#7998,.T.);+#7996=VERTEX_POINT('',#7997);+#7997=CARTESIAN_POINT('',(5.469682715053,-2.675,0.182635182233));+#7998=CIRCLE('',#7999,0.1);+#7999=AXIS2_PLACEMENT_3D('',#7978,#87,#6044);+#8000=ORIENTED_EDGE('',*,*,#8001,.T.);+#8001=EDGE_CURVE('',#7996,#8002,#8004,.T.);+#8002=VERTEX_POINT('',#8003);+#8003=CARTESIAN_POINT('',(5.376961550602,-2.675,0.734729635533));+#8004=LINE('',#7997,#6050);+#8005=ORIENTED_EDGE('',*,*,#8006,.T.);+#8006=EDGE_CURVE('',#8002,#8007,#8008,.T.);+#8007=VERTEX_POINT('',#7953);+#8008=CIRCLE('',#8009,0.2);+#8009=AXIS2_PLACEMENT_3D('',#7966,#59,#6056);+#8010=ORIENTED_EDGE('',*,*,#8011,.T.);+#8011=EDGE_CURVE('',#8007,#2069,#7952,.T.);+#8012=PLANE('',#8013);+#8013=AXIS2_PLACEMENT_3D('',#8014,#59,#13);+#8014=CARTESIAN_POINT('',(5.377811491544,-2.675,0.447016202907));+#8015=ADVANCED_FACE('',(#8016),#8030,.F.);+#8016=FACE_BOUND('',#8017,.F.);+#8017=EDGE_LOOP('',(#8018,#8019,#8026,#8029));+#8018=ORIENTED_EDGE('',*,*,#2092,.T.);+#8019=ORIENTED_EDGE('',*,*,#8020,.T.);+#8020=EDGE_CURVE('',#2087,#8021,#8023,.T.);+#8021=VERTEX_POINT('',#8022);+#8022=CARTESIAN_POINT('',(5.278480775301,-2.925,0.717364817767));+#8023=CIRCLE('',#8024,1.E-01);+#8024=AXIS2_PLACEMENT_3D('',#8025,#87,#6007);+#8025=CARTESIAN_POINT('',(5.18,-2.925,0.7));+#8026=ORIENTED_EDGE('',*,*,#8027,.F.);+#8027=EDGE_CURVE('',#7962,#8021,#8028,.T.);+#8028=LINE('',#7963,#58);+#8029=ORIENTED_EDGE('',*,*,#7961,.F.);+#8030=CYLINDRICAL_SURFACE('',#7965,1.E-01);+#8031=ADVANCED_FACE('',(#8032),#8081,.T.);+#8032=FACE_BOUND('',#8033,.T.);+#8033=EDGE_LOOP('',(#2099,#2085,#8019,#8034,#8039,#8046,#8051,#8056,#8061,#8067,#8072,#8078));+#8034=ORIENTED_EDGE('',*,*,#8035,.T.);+#8035=EDGE_CURVE('',#8021,#8036,#8038,.T.);+#8036=VERTEX_POINT('',#8037);+#8037=CARTESIAN_POINT('',(5.371201939752,-2.925,0.165270364467));+#8038=LINE('',#8022,#6013);+#8039=ORIENTED_EDGE('',*,*,#8040,.T.);+#8040=EDGE_CURVE('',#8036,#8041,#8043,.T.);+#8041=VERTEX_POINT('',#8042);+#8042=CARTESIAN_POINT('',(5.568163490354,-2.925,-1.387778780781E-16));+#8043=CIRCLE('',#8044,0.2);+#8044=AXIS2_PLACEMENT_3D('',#8045,#59,#6022);+#8045=CARTESIAN_POINT('',(5.568163490354,-2.925,0.2));+#8046=ORIENTED_EDGE('',*,*,#8047,.T.);+#8047=EDGE_CURVE('',#8041,#8048,#8050,.T.);+#8048=VERTEX_POINT('',#8049);+#8049=CARTESIAN_POINT('',(5.83,-2.925,-1.387778780781E-16));+#8050=LINE('',#8042,#27);+#8051=ORIENTED_EDGE('',*,*,#8052,.T.);+#8052=EDGE_CURVE('',#8048,#8053,#8055,.T.);+#8053=VERTEX_POINT('',#8054);+#8054=CARTESIAN_POINT('',(5.83,-2.925,1.E-01));+#8055=LINE('',#8049,#658);+#8056=ORIENTED_EDGE('',*,*,#8057,.T.);+#8057=EDGE_CURVE('',#8053,#8058,#8060,.T.);+#8058=VERTEX_POINT('',#8059);+#8059=CARTESIAN_POINT('',(5.568163490354,-2.925,0.1));+#8060=LINE('',#8054,#72);+#8061=ORIENTED_EDGE('',*,*,#8062,.T.);+#8062=EDGE_CURVE('',#8058,#8063,#8065,.T.);+#8063=VERTEX_POINT('',#8064);+#8064=CARTESIAN_POINT('',(5.469682715053,-2.925,0.182635182233));+#8065=CIRCLE('',#8066,0.1);+#8066=AXIS2_PLACEMENT_3D('',#8045,#87,#6044);+#8067=ORIENTED_EDGE('',*,*,#8068,.T.);+#8068=EDGE_CURVE('',#8063,#8069,#8071,.T.);+#8069=VERTEX_POINT('',#8070);+#8070=CARTESIAN_POINT('',(5.376961550602,-2.925,0.734729635533));+#8071=LINE('',#8064,#6050);+#8072=ORIENTED_EDGE('',*,*,#8073,.T.);+#8073=EDGE_CURVE('',#8069,#8074,#8076,.T.);+#8074=VERTEX_POINT('',#8075);+#8075=CARTESIAN_POINT('',(5.18,-2.925,0.9));+#8076=CIRCLE('',#8077,0.2);+#8077=AXIS2_PLACEMENT_3D('',#8025,#59,#6056);+#8078=ORIENTED_EDGE('',*,*,#8079,.T.);+#8079=EDGE_CURVE('',#8074,#2101,#8080,.T.);+#8080=LINE('',#8075,#72);+#8081=PLANE('',#8082);+#8082=AXIS2_PLACEMENT_3D('',#8083,#59,#13);+#8083=CARTESIAN_POINT('',(5.377811491544,-2.925,0.447016202907));+#8084=ADVANCED_FACE('',(#8085),#628,.F.);+#8085=FACE_BOUND('',#8086,.F.);+#8086=EDGE_LOOP('',(#8087,#8089,#8090,#8094));+#8087=ORIENTED_EDGE('',*,*,#8088,.F.);+#8088=EDGE_CURVE('',#2101,#2801,#8080,.T.);+#8089=ORIENTED_EDGE('',*,*,#2113,.T.);+#8090=ORIENTED_EDGE('',*,*,#8091,.T.);+#8091=EDGE_CURVE('',#2108,#2805,#8092,.T.);+#8092=LINE('',#8093,#72);+#8093=CARTESIAN_POINT('',(5.18,-3.475,0.9));+#8094=ORIENTED_EDGE('',*,*,#2804,.F.);+#8095=ADVANCED_FACE('',(#8096),#8152,.F.);+#8096=FACE_BOUND('',#8097,.F.);+#8097=EDGE_LOOP('',(#8098,#8099,#8100,#8107,#8112,#8119,#8124,#8129,#8134,#8140,#8145,#8150));+#8098=ORIENTED_EDGE('',*,*,#2107,.F.);+#8099=ORIENTED_EDGE('',*,*,#2118,.T.);+#8100=ORIENTED_EDGE('',*,*,#8101,.T.);+#8101=EDGE_CURVE('',#2119,#8102,#8104,.T.);+#8102=VERTEX_POINT('',#8103);+#8103=CARTESIAN_POINT('',(5.278480775301,-3.475,0.717364817767));+#8104=CIRCLE('',#8105,1.E-01);+#8105=AXIS2_PLACEMENT_3D('',#8106,#87,#6007);+#8106=CARTESIAN_POINT('',(5.18,-3.475,0.7));+#8107=ORIENTED_EDGE('',*,*,#8108,.T.);+#8108=EDGE_CURVE('',#8102,#8109,#8111,.T.);+#8109=VERTEX_POINT('',#8110);+#8110=CARTESIAN_POINT('',(5.371201939752,-3.475,0.165270364467));+#8111=LINE('',#8103,#6013);+#8112=ORIENTED_EDGE('',*,*,#8113,.T.);+#8113=EDGE_CURVE('',#8109,#8114,#8116,.T.);+#8114=VERTEX_POINT('',#8115);+#8115=CARTESIAN_POINT('',(5.568163490354,-3.475,-1.387778780781E-16));+#8116=CIRCLE('',#8117,0.2);+#8117=AXIS2_PLACEMENT_3D('',#8118,#59,#6022);+#8118=CARTESIAN_POINT('',(5.568163490354,-3.475,0.2));+#8119=ORIENTED_EDGE('',*,*,#8120,.T.);+#8120=EDGE_CURVE('',#8114,#8121,#8123,.T.);+#8121=VERTEX_POINT('',#8122);+#8122=CARTESIAN_POINT('',(5.83,-3.475,-1.387778780781E-16));+#8123=LINE('',#8115,#27);+#8124=ORIENTED_EDGE('',*,*,#8125,.T.);+#8125=EDGE_CURVE('',#8121,#8126,#8128,.T.);+#8126=VERTEX_POINT('',#8127);+#8127=CARTESIAN_POINT('',(5.83,-3.475,1.E-01));+#8128=LINE('',#8122,#658);+#8129=ORIENTED_EDGE('',*,*,#8130,.T.);+#8130=EDGE_CURVE('',#8126,#8131,#8133,.T.);+#8131=VERTEX_POINT('',#8132);+#8132=CARTESIAN_POINT('',(5.568163490354,-3.475,0.1));+#8133=LINE('',#8127,#72);+#8134=ORIENTED_EDGE('',*,*,#8135,.T.);+#8135=EDGE_CURVE('',#8131,#8136,#8138,.T.);+#8136=VERTEX_POINT('',#8137);+#8137=CARTESIAN_POINT('',(5.469682715053,-3.475,0.182635182233));+#8138=CIRCLE('',#8139,0.1);+#8139=AXIS2_PLACEMENT_3D('',#8118,#87,#6044);+#8140=ORIENTED_EDGE('',*,*,#8141,.T.);+#8141=EDGE_CURVE('',#8136,#8142,#8144,.T.);+#8142=VERTEX_POINT('',#8143);+#8143=CARTESIAN_POINT('',(5.376961550602,-3.475,0.734729635533));+#8144=LINE('',#8137,#6050);+#8145=ORIENTED_EDGE('',*,*,#8146,.T.);+#8146=EDGE_CURVE('',#8142,#8147,#8148,.T.);+#8147=VERTEX_POINT('',#8093);+#8148=CIRCLE('',#8149,0.2);+#8149=AXIS2_PLACEMENT_3D('',#8106,#59,#6056);+#8150=ORIENTED_EDGE('',*,*,#8151,.T.);+#8151=EDGE_CURVE('',#8147,#2108,#8092,.T.);+#8152=PLANE('',#8153);+#8153=AXIS2_PLACEMENT_3D('',#8154,#59,#13);+#8154=CARTESIAN_POINT('',(5.377811491544,-3.475,0.447016202907));+#8155=ADVANCED_FACE('',(#8156),#8170,.F.);+#8156=FACE_BOUND('',#8157,.F.);+#8157=EDGE_LOOP('',(#8158,#8159,#8166,#8169));+#8158=ORIENTED_EDGE('',*,*,#2131,.T.);+#8159=ORIENTED_EDGE('',*,*,#8160,.T.);+#8160=EDGE_CURVE('',#2126,#8161,#8163,.T.);+#8161=VERTEX_POINT('',#8162);+#8162=CARTESIAN_POINT('',(5.278480775301,-3.725,0.717364817767));+#8163=CIRCLE('',#8164,1.E-01);+#8164=AXIS2_PLACEMENT_3D('',#8165,#87,#6007);+#8165=CARTESIAN_POINT('',(5.18,-3.725,0.7));+#8166=ORIENTED_EDGE('',*,*,#8167,.F.);+#8167=EDGE_CURVE('',#8102,#8161,#8168,.T.);+#8168=LINE('',#8103,#58);+#8169=ORIENTED_EDGE('',*,*,#8101,.F.);+#8170=CYLINDRICAL_SURFACE('',#8105,1.E-01);+#8171=ADVANCED_FACE('',(#8172),#8221,.T.);+#8172=FACE_BOUND('',#8173,.T.);+#8173=EDGE_LOOP('',(#2138,#2124,#8159,#8174,#8179,#8186,#8191,#8196,#8201,#8207,#8212,#8218));+#8174=ORIENTED_EDGE('',*,*,#8175,.T.);+#8175=EDGE_CURVE('',#8161,#8176,#8178,.T.);+#8176=VERTEX_POINT('',#8177);+#8177=CARTESIAN_POINT('',(5.371201939752,-3.725,0.165270364467));+#8178=LINE('',#8162,#6013);+#8179=ORIENTED_EDGE('',*,*,#8180,.T.);+#8180=EDGE_CURVE('',#8176,#8181,#8183,.T.);+#8181=VERTEX_POINT('',#8182);+#8182=CARTESIAN_POINT('',(5.568163490354,-3.725,-1.387778780781E-16));+#8183=CIRCLE('',#8184,0.2);+#8184=AXIS2_PLACEMENT_3D('',#8185,#59,#6022);+#8185=CARTESIAN_POINT('',(5.568163490354,-3.725,0.2));+#8186=ORIENTED_EDGE('',*,*,#8187,.T.);+#8187=EDGE_CURVE('',#8181,#8188,#8190,.T.);+#8188=VERTEX_POINT('',#8189);+#8189=CARTESIAN_POINT('',(5.83,-3.725,-1.387778780781E-16));+#8190=LINE('',#8182,#27);+#8191=ORIENTED_EDGE('',*,*,#8192,.T.);+#8192=EDGE_CURVE('',#8188,#8193,#8195,.T.);+#8193=VERTEX_POINT('',#8194);+#8194=CARTESIAN_POINT('',(5.83,-3.725,1.E-01));+#8195=LINE('',#8189,#658);+#8196=ORIENTED_EDGE('',*,*,#8197,.T.);+#8197=EDGE_CURVE('',#8193,#8198,#8200,.T.);+#8198=VERTEX_POINT('',#8199);+#8199=CARTESIAN_POINT('',(5.568163490354,-3.725,0.1));+#8200=LINE('',#8194,#72);+#8201=ORIENTED_EDGE('',*,*,#8202,.T.);+#8202=EDGE_CURVE('',#8198,#8203,#8205,.T.);+#8203=VERTEX_POINT('',#8204);+#8204=CARTESIAN_POINT('',(5.469682715053,-3.725,0.182635182233));+#8205=CIRCLE('',#8206,0.1);+#8206=AXIS2_PLACEMENT_3D('',#8185,#87,#6044);+#8207=ORIENTED_EDGE('',*,*,#8208,.T.);+#8208=EDGE_CURVE('',#8203,#8209,#8211,.T.);+#8209=VERTEX_POINT('',#8210);+#8210=CARTESIAN_POINT('',(5.376961550602,-3.725,0.734729635533));+#8211=LINE('',#8204,#6050);+#8212=ORIENTED_EDGE('',*,*,#8213,.T.);+#8213=EDGE_CURVE('',#8209,#8214,#8216,.T.);+#8214=VERTEX_POINT('',#8215);+#8215=CARTESIAN_POINT('',(5.18,-3.725,0.9));+#8216=CIRCLE('',#8217,0.2);+#8217=AXIS2_PLACEMENT_3D('',#8165,#59,#6056);+#8218=ORIENTED_EDGE('',*,*,#8219,.T.);+#8219=EDGE_CURVE('',#8214,#2140,#8220,.T.);+#8220=LINE('',#8215,#72);+#8221=PLANE('',#8222);+#8222=AXIS2_PLACEMENT_3D('',#8223,#59,#13);+#8223=CARTESIAN_POINT('',(5.377811491544,-3.725,0.447016202907));+#8224=ADVANCED_FACE('',(#8225),#628,.F.);+#8225=FACE_BOUND('',#8226,.F.);+#8226=EDGE_LOOP('',(#8227,#8229,#8230,#8234));+#8227=ORIENTED_EDGE('',*,*,#8228,.F.);+#8228=EDGE_CURVE('',#2140,#2809,#8220,.T.);+#8229=ORIENTED_EDGE('',*,*,#2152,.T.);+#8230=ORIENTED_EDGE('',*,*,#8231,.T.);+#8231=EDGE_CURVE('',#2147,#2813,#8232,.T.);+#8232=LINE('',#8233,#72);+#8233=CARTESIAN_POINT('',(5.18,-4.275,0.9));+#8234=ORIENTED_EDGE('',*,*,#2812,.F.);+#8235=ADVANCED_FACE('',(#8236),#8292,.F.);+#8236=FACE_BOUND('',#8237,.F.);+#8237=EDGE_LOOP('',(#8238,#8239,#8240,#8247,#8252,#8259,#8264,#8269,#8274,#8280,#8285,#8290));+#8238=ORIENTED_EDGE('',*,*,#2146,.F.);+#8239=ORIENTED_EDGE('',*,*,#2157,.T.);+#8240=ORIENTED_EDGE('',*,*,#8241,.T.);+#8241=EDGE_CURVE('',#2158,#8242,#8244,.T.);+#8242=VERTEX_POINT('',#8243);+#8243=CARTESIAN_POINT('',(5.278480775301,-4.275,0.717364817767));+#8244=CIRCLE('',#8245,1.E-01);+#8245=AXIS2_PLACEMENT_3D('',#8246,#87,#6007);+#8246=CARTESIAN_POINT('',(5.18,-4.275,0.7));+#8247=ORIENTED_EDGE('',*,*,#8248,.T.);+#8248=EDGE_CURVE('',#8242,#8249,#8251,.T.);+#8249=VERTEX_POINT('',#8250);+#8250=CARTESIAN_POINT('',(5.371201939752,-4.275,0.165270364467));+#8251=LINE('',#8243,#6013);+#8252=ORIENTED_EDGE('',*,*,#8253,.T.);+#8253=EDGE_CURVE('',#8249,#8254,#8256,.T.);+#8254=VERTEX_POINT('',#8255);+#8255=CARTESIAN_POINT('',(5.568163490354,-4.275,-1.387778780781E-16));+#8256=CIRCLE('',#8257,0.2);+#8257=AXIS2_PLACEMENT_3D('',#8258,#59,#6022);+#8258=CARTESIAN_POINT('',(5.568163490354,-4.275,0.2));+#8259=ORIENTED_EDGE('',*,*,#8260,.T.);+#8260=EDGE_CURVE('',#8254,#8261,#8263,.T.);+#8261=VERTEX_POINT('',#8262);+#8262=CARTESIAN_POINT('',(5.83,-4.275,-1.387778780781E-16));+#8263=LINE('',#8255,#27);+#8264=ORIENTED_EDGE('',*,*,#8265,.T.);+#8265=EDGE_CURVE('',#8261,#8266,#8268,.T.);+#8266=VERTEX_POINT('',#8267);+#8267=CARTESIAN_POINT('',(5.83,-4.275,1.E-01));+#8268=LINE('',#8262,#658);+#8269=ORIENTED_EDGE('',*,*,#8270,.T.);+#8270=EDGE_CURVE('',#8266,#8271,#8273,.T.);+#8271=VERTEX_POINT('',#8272);+#8272=CARTESIAN_POINT('',(5.568163490354,-4.275,0.1));+#8273=LINE('',#8267,#72);+#8274=ORIENTED_EDGE('',*,*,#8275,.T.);+#8275=EDGE_CURVE('',#8271,#8276,#8278,.T.);+#8276=VERTEX_POINT('',#8277);+#8277=CARTESIAN_POINT('',(5.469682715053,-4.275,0.182635182233));+#8278=CIRCLE('',#8279,0.1);+#8279=AXIS2_PLACEMENT_3D('',#8258,#87,#6044);+#8280=ORIENTED_EDGE('',*,*,#8281,.T.);+#8281=EDGE_CURVE('',#8276,#8282,#8284,.T.);+#8282=VERTEX_POINT('',#8283);+#8283=CARTESIAN_POINT('',(5.376961550602,-4.275,0.734729635533));+#8284=LINE('',#8277,#6050);+#8285=ORIENTED_EDGE('',*,*,#8286,.T.);+#8286=EDGE_CURVE('',#8282,#8287,#8288,.T.);+#8287=VERTEX_POINT('',#8233);+#8288=CIRCLE('',#8289,0.2);+#8289=AXIS2_PLACEMENT_3D('',#8246,#59,#6056);+#8290=ORIENTED_EDGE('',*,*,#8291,.T.);+#8291=EDGE_CURVE('',#8287,#2147,#8232,.T.);+#8292=PLANE('',#8293);+#8293=AXIS2_PLACEMENT_3D('',#8294,#59,#13);+#8294=CARTESIAN_POINT('',(5.377811491544,-4.275,0.447016202907));+#8295=ADVANCED_FACE('',(#8296),#8310,.F.);+#8296=FACE_BOUND('',#8297,.F.);+#8297=EDGE_LOOP('',(#8298,#8299,#8306,#8309));+#8298=ORIENTED_EDGE('',*,*,#2170,.T.);+#8299=ORIENTED_EDGE('',*,*,#8300,.T.);+#8300=EDGE_CURVE('',#2165,#8301,#8303,.T.);+#8301=VERTEX_POINT('',#8302);+#8302=CARTESIAN_POINT('',(5.278480775301,-4.525,0.717364817767));+#8303=CIRCLE('',#8304,1.E-01);+#8304=AXIS2_PLACEMENT_3D('',#8305,#87,#6007);+#8305=CARTESIAN_POINT('',(5.18,-4.525,0.7));+#8306=ORIENTED_EDGE('',*,*,#8307,.F.);+#8307=EDGE_CURVE('',#8242,#8301,#8308,.T.);+#8308=LINE('',#8243,#58);+#8309=ORIENTED_EDGE('',*,*,#8241,.F.);+#8310=CYLINDRICAL_SURFACE('',#8245,1.E-01);+#8311=ADVANCED_FACE('',(#8312),#8361,.T.);+#8312=FACE_BOUND('',#8313,.T.);+#8313=EDGE_LOOP('',(#2177,#2163,#8299,#8314,#8319,#8326,#8331,#8336,#8341,#8347,#8352,#8358));+#8314=ORIENTED_EDGE('',*,*,#8315,.T.);+#8315=EDGE_CURVE('',#8301,#8316,#8318,.T.);+#8316=VERTEX_POINT('',#8317);+#8317=CARTESIAN_POINT('',(5.371201939752,-4.525,0.165270364467));+#8318=LINE('',#8302,#6013);+#8319=ORIENTED_EDGE('',*,*,#8320,.T.);+#8320=EDGE_CURVE('',#8316,#8321,#8323,.T.);+#8321=VERTEX_POINT('',#8322);+#8322=CARTESIAN_POINT('',(5.568163490354,-4.525,-1.387778780781E-16));+#8323=CIRCLE('',#8324,0.2);+#8324=AXIS2_PLACEMENT_3D('',#8325,#59,#6022);+#8325=CARTESIAN_POINT('',(5.568163490354,-4.525,0.2));+#8326=ORIENTED_EDGE('',*,*,#8327,.T.);+#8327=EDGE_CURVE('',#8321,#8328,#8330,.T.);+#8328=VERTEX_POINT('',#8329);+#8329=CARTESIAN_POINT('',(5.83,-4.525,-1.387778780781E-16));+#8330=LINE('',#8322,#27);+#8331=ORIENTED_EDGE('',*,*,#8332,.T.);+#8332=EDGE_CURVE('',#8328,#8333,#8335,.T.);+#8333=VERTEX_POINT('',#8334);+#8334=CARTESIAN_POINT('',(5.83,-4.525,1.E-01));+#8335=LINE('',#8329,#658);+#8336=ORIENTED_EDGE('',*,*,#8337,.T.);+#8337=EDGE_CURVE('',#8333,#8338,#8340,.T.);+#8338=VERTEX_POINT('',#8339);+#8339=CARTESIAN_POINT('',(5.568163490354,-4.525,0.1));+#8340=LINE('',#8334,#72);+#8341=ORIENTED_EDGE('',*,*,#8342,.T.);+#8342=EDGE_CURVE('',#8338,#8343,#8345,.T.);+#8343=VERTEX_POINT('',#8344);+#8344=CARTESIAN_POINT('',(5.469682715053,-4.525,0.182635182233));+#8345=CIRCLE('',#8346,0.1);+#8346=AXIS2_PLACEMENT_3D('',#8325,#87,#6044);+#8347=ORIENTED_EDGE('',*,*,#8348,.T.);+#8348=EDGE_CURVE('',#8343,#8349,#8351,.T.);+#8349=VERTEX_POINT('',#8350);+#8350=CARTESIAN_POINT('',(5.376961550602,-4.525,0.734729635533));+#8351=LINE('',#8344,#6050);+#8352=ORIENTED_EDGE('',*,*,#8353,.T.);+#8353=EDGE_CURVE('',#8349,#8354,#8356,.T.);+#8354=VERTEX_POINT('',#8355);+#8355=CARTESIAN_POINT('',(5.18,-4.525,0.9));+#8356=CIRCLE('',#8357,0.2);+#8357=AXIS2_PLACEMENT_3D('',#8305,#59,#6056);+#8358=ORIENTED_EDGE('',*,*,#8359,.T.);+#8359=EDGE_CURVE('',#8354,#2179,#8360,.T.);+#8360=LINE('',#8355,#72);+#8361=PLANE('',#8362);+#8362=AXIS2_PLACEMENT_3D('',#8363,#59,#13);+#8363=CARTESIAN_POINT('',(5.377811491544,-4.525,0.447016202907));+#8364=ADVANCED_FACE('',(#8365),#628,.F.);+#8365=FACE_BOUND('',#8366,.F.);+#8366=EDGE_LOOP('',(#8367,#8369,#8370,#8374));+#8367=ORIENTED_EDGE('',*,*,#8368,.F.);+#8368=EDGE_CURVE('',#2179,#2817,#8360,.T.);+#8369=ORIENTED_EDGE('',*,*,#2191,.T.);+#8370=ORIENTED_EDGE('',*,*,#8371,.T.);+#8371=EDGE_CURVE('',#2186,#2821,#8372,.T.);+#8372=LINE('',#8373,#72);+#8373=CARTESIAN_POINT('',(5.18,-5.075,0.9));+#8374=ORIENTED_EDGE('',*,*,#2820,.F.);+#8375=ADVANCED_FACE('',(#8376),#8432,.F.);+#8376=FACE_BOUND('',#8377,.F.);+#8377=EDGE_LOOP('',(#8378,#8379,#8380,#8387,#8392,#8399,#8404,#8409,#8414,#8420,#8425,#8430));+#8378=ORIENTED_EDGE('',*,*,#2185,.F.);+#8379=ORIENTED_EDGE('',*,*,#2196,.T.);+#8380=ORIENTED_EDGE('',*,*,#8381,.T.);+#8381=EDGE_CURVE('',#2197,#8382,#8384,.T.);+#8382=VERTEX_POINT('',#8383);+#8383=CARTESIAN_POINT('',(5.278480775301,-5.075,0.717364817767));+#8384=CIRCLE('',#8385,1.E-01);+#8385=AXIS2_PLACEMENT_3D('',#8386,#87,#6007);+#8386=CARTESIAN_POINT('',(5.18,-5.075,0.7));+#8387=ORIENTED_EDGE('',*,*,#8388,.T.);+#8388=EDGE_CURVE('',#8382,#8389,#8391,.T.);+#8389=VERTEX_POINT('',#8390);+#8390=CARTESIAN_POINT('',(5.371201939752,-5.075,0.165270364467));+#8391=LINE('',#8383,#6013);+#8392=ORIENTED_EDGE('',*,*,#8393,.T.);+#8393=EDGE_CURVE('',#8389,#8394,#8396,.T.);+#8394=VERTEX_POINT('',#8395);+#8395=CARTESIAN_POINT('',(5.568163490354,-5.075,-1.387778780781E-16));+#8396=CIRCLE('',#8397,0.2);+#8397=AXIS2_PLACEMENT_3D('',#8398,#59,#6022);+#8398=CARTESIAN_POINT('',(5.568163490354,-5.075,0.2));+#8399=ORIENTED_EDGE('',*,*,#8400,.T.);+#8400=EDGE_CURVE('',#8394,#8401,#8403,.T.);+#8401=VERTEX_POINT('',#8402);+#8402=CARTESIAN_POINT('',(5.83,-5.075,-1.387778780781E-16));+#8403=LINE('',#8395,#27);+#8404=ORIENTED_EDGE('',*,*,#8405,.T.);+#8405=EDGE_CURVE('',#8401,#8406,#8408,.T.);+#8406=VERTEX_POINT('',#8407);+#8407=CARTESIAN_POINT('',(5.83,-5.075,1.E-01));+#8408=LINE('',#8402,#658);+#8409=ORIENTED_EDGE('',*,*,#8410,.T.);+#8410=EDGE_CURVE('',#8406,#8411,#8413,.T.);+#8411=VERTEX_POINT('',#8412);+#8412=CARTESIAN_POINT('',(5.568163490354,-5.075,0.1));+#8413=LINE('',#8407,#72);+#8414=ORIENTED_EDGE('',*,*,#8415,.T.);+#8415=EDGE_CURVE('',#8411,#8416,#8418,.T.);+#8416=VERTEX_POINT('',#8417);+#8417=CARTESIAN_POINT('',(5.469682715053,-5.075,0.182635182233));+#8418=CIRCLE('',#8419,0.1);+#8419=AXIS2_PLACEMENT_3D('',#8398,#87,#6044);+#8420=ORIENTED_EDGE('',*,*,#8421,.T.);+#8421=EDGE_CURVE('',#8416,#8422,#8424,.T.);+#8422=VERTEX_POINT('',#8423);+#8423=CARTESIAN_POINT('',(5.376961550602,-5.075,0.734729635533));+#8424=LINE('',#8417,#6050);+#8425=ORIENTED_EDGE('',*,*,#8426,.T.);+#8426=EDGE_CURVE('',#8422,#8427,#8428,.T.);+#8427=VERTEX_POINT('',#8373);+#8428=CIRCLE('',#8429,0.2);+#8429=AXIS2_PLACEMENT_3D('',#8386,#59,#6056);+#8430=ORIENTED_EDGE('',*,*,#8431,.T.);+#8431=EDGE_CURVE('',#8427,#2186,#8372,.T.);+#8432=PLANE('',#8433);+#8433=AXIS2_PLACEMENT_3D('',#8434,#59,#13);+#8434=CARTESIAN_POINT('',(5.377811491544,-5.075,0.447016202907));+#8435=ADVANCED_FACE('',(#8436),#8450,.F.);+#8436=FACE_BOUND('',#8437,.F.);+#8437=EDGE_LOOP('',(#8438,#8439,#8446,#8449));+#8438=ORIENTED_EDGE('',*,*,#2209,.T.);+#8439=ORIENTED_EDGE('',*,*,#8440,.T.);+#8440=EDGE_CURVE('',#2204,#8441,#8443,.T.);+#8441=VERTEX_POINT('',#8442);+#8442=CARTESIAN_POINT('',(5.278480775301,-5.325,0.717364817767));+#8443=CIRCLE('',#8444,1.E-01);+#8444=AXIS2_PLACEMENT_3D('',#8445,#87,#6007);+#8445=CARTESIAN_POINT('',(5.18,-5.325,0.7));+#8446=ORIENTED_EDGE('',*,*,#8447,.F.);+#8447=EDGE_CURVE('',#8382,#8441,#8448,.T.);+#8448=LINE('',#8383,#58);+#8449=ORIENTED_EDGE('',*,*,#8381,.F.);+#8450=CYLINDRICAL_SURFACE('',#8385,1.E-01);+#8451=ADVANCED_FACE('',(#8452),#8501,.T.);+#8452=FACE_BOUND('',#8453,.T.);+#8453=EDGE_LOOP('',(#2216,#2202,#8439,#8454,#8459,#8466,#8471,#8476,#8481,#8487,#8492,#8498));+#8454=ORIENTED_EDGE('',*,*,#8455,.T.);+#8455=EDGE_CURVE('',#8441,#8456,#8458,.T.);+#8456=VERTEX_POINT('',#8457);+#8457=CARTESIAN_POINT('',(5.371201939752,-5.325,0.165270364467));+#8458=LINE('',#8442,#6013);+#8459=ORIENTED_EDGE('',*,*,#8460,.T.);+#8460=EDGE_CURVE('',#8456,#8461,#8463,.T.);+#8461=VERTEX_POINT('',#8462);+#8462=CARTESIAN_POINT('',(5.568163490354,-5.325,-1.387778780781E-16));+#8463=CIRCLE('',#8464,0.2);+#8464=AXIS2_PLACEMENT_3D('',#8465,#59,#6022);+#8465=CARTESIAN_POINT('',(5.568163490354,-5.325,0.2));+#8466=ORIENTED_EDGE('',*,*,#8467,.T.);+#8467=EDGE_CURVE('',#8461,#8468,#8470,.T.);+#8468=VERTEX_POINT('',#8469);+#8469=CARTESIAN_POINT('',(5.83,-5.325,-1.387778780781E-16));+#8470=LINE('',#8462,#27);+#8471=ORIENTED_EDGE('',*,*,#8472,.T.);+#8472=EDGE_CURVE('',#8468,#8473,#8475,.T.);+#8473=VERTEX_POINT('',#8474);+#8474=CARTESIAN_POINT('',(5.83,-5.325,1.E-01));+#8475=LINE('',#8469,#658);+#8476=ORIENTED_EDGE('',*,*,#8477,.T.);+#8477=EDGE_CURVE('',#8473,#8478,#8480,.T.);+#8478=VERTEX_POINT('',#8479);+#8479=CARTESIAN_POINT('',(5.568163490354,-5.325,0.1));+#8480=LINE('',#8474,#72);+#8481=ORIENTED_EDGE('',*,*,#8482,.T.);+#8482=EDGE_CURVE('',#8478,#8483,#8485,.T.);+#8483=VERTEX_POINT('',#8484);+#8484=CARTESIAN_POINT('',(5.469682715053,-5.325,0.182635182233));+#8485=CIRCLE('',#8486,0.1);+#8486=AXIS2_PLACEMENT_3D('',#8465,#87,#6044);+#8487=ORIENTED_EDGE('',*,*,#8488,.T.);+#8488=EDGE_CURVE('',#8483,#8489,#8491,.T.);+#8489=VERTEX_POINT('',#8490);+#8490=CARTESIAN_POINT('',(5.376961550602,-5.325,0.734729635533));+#8491=LINE('',#8484,#6050);+#8492=ORIENTED_EDGE('',*,*,#8493,.T.);+#8493=EDGE_CURVE('',#8489,#8494,#8496,.T.);+#8494=VERTEX_POINT('',#8495);+#8495=CARTESIAN_POINT('',(5.18,-5.325,0.9));+#8496=CIRCLE('',#8497,0.2);+#8497=AXIS2_PLACEMENT_3D('',#8445,#59,#6056);+#8498=ORIENTED_EDGE('',*,*,#8499,.T.);+#8499=EDGE_CURVE('',#8494,#2218,#8500,.T.);+#8500=LINE('',#8495,#72);+#8501=PLANE('',#8502);+#8502=AXIS2_PLACEMENT_3D('',#8503,#59,#13);+#8503=CARTESIAN_POINT('',(5.377811491544,-5.325,0.447016202907));+#8504=ADVANCED_FACE('',(#8505),#628,.F.);+#8505=FACE_BOUND('',#8506,.F.);+#8506=EDGE_LOOP('',(#8507,#8509,#8510,#8514));+#8507=ORIENTED_EDGE('',*,*,#8508,.F.);+#8508=EDGE_CURVE('',#2218,#2825,#8500,.T.);+#8509=ORIENTED_EDGE('',*,*,#2230,.T.);+#8510=ORIENTED_EDGE('',*,*,#8511,.T.);+#8511=EDGE_CURVE('',#2225,#2829,#8512,.T.);+#8512=LINE('',#8513,#72);+#8513=CARTESIAN_POINT('',(5.18,-5.875,0.9));+#8514=ORIENTED_EDGE('',*,*,#2828,.F.);+#8515=ADVANCED_FACE('',(#8516),#8572,.F.);+#8516=FACE_BOUND('',#8517,.F.);+#8517=EDGE_LOOP('',(#8518,#8519,#8520,#8527,#8532,#8539,#8544,#8549,#8554,#8560,#8565,#8570));+#8518=ORIENTED_EDGE('',*,*,#2224,.F.);+#8519=ORIENTED_EDGE('',*,*,#2235,.T.);+#8520=ORIENTED_EDGE('',*,*,#8521,.T.);+#8521=EDGE_CURVE('',#2236,#8522,#8524,.T.);+#8522=VERTEX_POINT('',#8523);+#8523=CARTESIAN_POINT('',(5.278480775301,-5.875,0.717364817767));+#8524=CIRCLE('',#8525,1.E-01);+#8525=AXIS2_PLACEMENT_3D('',#8526,#87,#6007);+#8526=CARTESIAN_POINT('',(5.18,-5.875,0.7));+#8527=ORIENTED_EDGE('',*,*,#8528,.T.);+#8528=EDGE_CURVE('',#8522,#8529,#8531,.T.);+#8529=VERTEX_POINT('',#8530);+#8530=CARTESIAN_POINT('',(5.371201939752,-5.875,0.165270364467));+#8531=LINE('',#8523,#6013);+#8532=ORIENTED_EDGE('',*,*,#8533,.T.);+#8533=EDGE_CURVE('',#8529,#8534,#8536,.T.);+#8534=VERTEX_POINT('',#8535);+#8535=CARTESIAN_POINT('',(5.568163490354,-5.875,-1.387778780781E-16));+#8536=CIRCLE('',#8537,0.2);+#8537=AXIS2_PLACEMENT_3D('',#8538,#59,#6022);+#8538=CARTESIAN_POINT('',(5.568163490354,-5.875,0.2));+#8539=ORIENTED_EDGE('',*,*,#8540,.T.);+#8540=EDGE_CURVE('',#8534,#8541,#8543,.T.);+#8541=VERTEX_POINT('',#8542);+#8542=CARTESIAN_POINT('',(5.83,-5.875,-1.387778780781E-16));+#8543=LINE('',#8535,#27);+#8544=ORIENTED_EDGE('',*,*,#8545,.T.);+#8545=EDGE_CURVE('',#8541,#8546,#8548,.T.);+#8546=VERTEX_POINT('',#8547);+#8547=CARTESIAN_POINT('',(5.83,-5.875,1.E-01));+#8548=LINE('',#8542,#658);+#8549=ORIENTED_EDGE('',*,*,#8550,.T.);+#8550=EDGE_CURVE('',#8546,#8551,#8553,.T.);+#8551=VERTEX_POINT('',#8552);+#8552=CARTESIAN_POINT('',(5.568163490354,-5.875,0.1));+#8553=LINE('',#8547,#72);+#8554=ORIENTED_EDGE('',*,*,#8555,.T.);+#8555=EDGE_CURVE('',#8551,#8556,#8558,.T.);+#8556=VERTEX_POINT('',#8557);+#8557=CARTESIAN_POINT('',(5.469682715053,-5.875,0.182635182233));+#8558=CIRCLE('',#8559,0.1);+#8559=AXIS2_PLACEMENT_3D('',#8538,#87,#6044);+#8560=ORIENTED_EDGE('',*,*,#8561,.T.);+#8561=EDGE_CURVE('',#8556,#8562,#8564,.T.);+#8562=VERTEX_POINT('',#8563);+#8563=CARTESIAN_POINT('',(5.376961550602,-5.875,0.734729635533));+#8564=LINE('',#8557,#6050);+#8565=ORIENTED_EDGE('',*,*,#8566,.T.);+#8566=EDGE_CURVE('',#8562,#8567,#8568,.T.);+#8567=VERTEX_POINT('',#8513);+#8568=CIRCLE('',#8569,0.2);+#8569=AXIS2_PLACEMENT_3D('',#8526,#59,#6056);+#8570=ORIENTED_EDGE('',*,*,#8571,.T.);+#8571=EDGE_CURVE('',#8567,#2225,#8512,.T.);+#8572=PLANE('',#8573);+#8573=AXIS2_PLACEMENT_3D('',#8574,#59,#13);+#8574=CARTESIAN_POINT('',(5.377811491544,-5.875,0.447016202907));+#8575=ADVANCED_FACE('',(#8576),#8590,.F.);+#8576=FACE_BOUND('',#8577,.F.);+#8577=EDGE_LOOP('',(#8578,#8579,#8586,#8589));+#8578=ORIENTED_EDGE('',*,*,#2248,.T.);+#8579=ORIENTED_EDGE('',*,*,#8580,.T.);+#8580=EDGE_CURVE('',#2243,#8581,#8583,.T.);+#8581=VERTEX_POINT('',#8582);+#8582=CARTESIAN_POINT('',(5.278480775301,-6.125,0.717364817767));+#8583=CIRCLE('',#8584,1.E-01);+#8584=AXIS2_PLACEMENT_3D('',#8585,#87,#6007);+#8585=CARTESIAN_POINT('',(5.18,-6.125,0.7));+#8586=ORIENTED_EDGE('',*,*,#8587,.F.);+#8587=EDGE_CURVE('',#8522,#8581,#8588,.T.);+#8588=LINE('',#8523,#58);+#8589=ORIENTED_EDGE('',*,*,#8521,.F.);+#8590=CYLINDRICAL_SURFACE('',#8525,1.E-01);+#8591=ADVANCED_FACE('',(#8592),#8641,.T.);+#8592=FACE_BOUND('',#8593,.T.);+#8593=EDGE_LOOP('',(#2255,#2241,#8579,#8594,#8599,#8606,#8611,#8616,#8621,#8627,#8632,#8638));+#8594=ORIENTED_EDGE('',*,*,#8595,.T.);+#8595=EDGE_CURVE('',#8581,#8596,#8598,.T.);+#8596=VERTEX_POINT('',#8597);+#8597=CARTESIAN_POINT('',(5.371201939752,-6.125,0.165270364467));+#8598=LINE('',#8582,#6013);+#8599=ORIENTED_EDGE('',*,*,#8600,.T.);+#8600=EDGE_CURVE('',#8596,#8601,#8603,.T.);+#8601=VERTEX_POINT('',#8602);+#8602=CARTESIAN_POINT('',(5.568163490354,-6.125,-1.387778780781E-16));+#8603=CIRCLE('',#8604,0.2);+#8604=AXIS2_PLACEMENT_3D('',#8605,#59,#6022);+#8605=CARTESIAN_POINT('',(5.568163490354,-6.125,0.2));+#8606=ORIENTED_EDGE('',*,*,#8607,.T.);+#8607=EDGE_CURVE('',#8601,#8608,#8610,.T.);+#8608=VERTEX_POINT('',#8609);+#8609=CARTESIAN_POINT('',(5.83,-6.125,-1.387778780781E-16));+#8610=LINE('',#8602,#27);+#8611=ORIENTED_EDGE('',*,*,#8612,.T.);+#8612=EDGE_CURVE('',#8608,#8613,#8615,.T.);+#8613=VERTEX_POINT('',#8614);+#8614=CARTESIAN_POINT('',(5.83,-6.125,1.E-01));+#8615=LINE('',#8609,#658);+#8616=ORIENTED_EDGE('',*,*,#8617,.T.);+#8617=EDGE_CURVE('',#8613,#8618,#8620,.T.);+#8618=VERTEX_POINT('',#8619);+#8619=CARTESIAN_POINT('',(5.568163490354,-6.125,0.1));+#8620=LINE('',#8614,#72);+#8621=ORIENTED_EDGE('',*,*,#8622,.T.);+#8622=EDGE_CURVE('',#8618,#8623,#8625,.T.);+#8623=VERTEX_POINT('',#8624);+#8624=CARTESIAN_POINT('',(5.469682715053,-6.125,0.182635182233));+#8625=CIRCLE('',#8626,0.1);+#8626=AXIS2_PLACEMENT_3D('',#8605,#87,#6044);+#8627=ORIENTED_EDGE('',*,*,#8628,.T.);+#8628=EDGE_CURVE('',#8623,#8629,#8631,.T.);+#8629=VERTEX_POINT('',#8630);+#8630=CARTESIAN_POINT('',(5.376961550602,-6.125,0.734729635533));+#8631=LINE('',#8624,#6050);+#8632=ORIENTED_EDGE('',*,*,#8633,.T.);+#8633=EDGE_CURVE('',#8629,#8634,#8636,.T.);+#8634=VERTEX_POINT('',#8635);+#8635=CARTESIAN_POINT('',(5.18,-6.125,0.9));+#8636=CIRCLE('',#8637,0.2);+#8637=AXIS2_PLACEMENT_3D('',#8585,#59,#6056);+#8638=ORIENTED_EDGE('',*,*,#8639,.T.);+#8639=EDGE_CURVE('',#8634,#2257,#8640,.T.);+#8640=LINE('',#8635,#72);+#8641=PLANE('',#8642);+#8642=AXIS2_PLACEMENT_3D('',#8643,#59,#13);+#8643=CARTESIAN_POINT('',(5.377811491544,-6.125,0.447016202907));+#8644=ADVANCED_FACE('',(#8645),#628,.F.);+#8645=FACE_BOUND('',#8646,.F.);+#8646=EDGE_LOOP('',(#8647,#8649,#8650,#8654));+#8647=ORIENTED_EDGE('',*,*,#8648,.F.);+#8648=EDGE_CURVE('',#2257,#2833,#8640,.T.);+#8649=ORIENTED_EDGE('',*,*,#2269,.T.);+#8650=ORIENTED_EDGE('',*,*,#8651,.T.);+#8651=EDGE_CURVE('',#2264,#2837,#8652,.T.);+#8652=LINE('',#8653,#72);+#8653=CARTESIAN_POINT('',(5.18,-6.675,0.9));+#8654=ORIENTED_EDGE('',*,*,#2836,.F.);+#8655=ADVANCED_FACE('',(#8656),#8712,.F.);+#8656=FACE_BOUND('',#8657,.F.);+#8657=EDGE_LOOP('',(#8658,#8659,#8660,#8667,#8672,#8679,#8684,#8689,#8694,#8700,#8705,#8710));+#8658=ORIENTED_EDGE('',*,*,#2263,.F.);+#8659=ORIENTED_EDGE('',*,*,#2274,.T.);+#8660=ORIENTED_EDGE('',*,*,#8661,.T.);+#8661=EDGE_CURVE('',#2275,#8662,#8664,.T.);+#8662=VERTEX_POINT('',#8663);+#8663=CARTESIAN_POINT('',(5.278480775301,-6.675,0.717364817767));+#8664=CIRCLE('',#8665,1.E-01);+#8665=AXIS2_PLACEMENT_3D('',#8666,#87,#6007);+#8666=CARTESIAN_POINT('',(5.18,-6.675,0.7));+#8667=ORIENTED_EDGE('',*,*,#8668,.T.);+#8668=EDGE_CURVE('',#8662,#8669,#8671,.T.);+#8669=VERTEX_POINT('',#8670);+#8670=CARTESIAN_POINT('',(5.371201939752,-6.675,0.165270364467));+#8671=LINE('',#8663,#6013);+#8672=ORIENTED_EDGE('',*,*,#8673,.T.);+#8673=EDGE_CURVE('',#8669,#8674,#8676,.T.);+#8674=VERTEX_POINT('',#8675);+#8675=CARTESIAN_POINT('',(5.568163490354,-6.675,-1.387778780781E-16));+#8676=CIRCLE('',#8677,0.2);+#8677=AXIS2_PLACEMENT_3D('',#8678,#59,#6022);+#8678=CARTESIAN_POINT('',(5.568163490354,-6.675,0.2));+#8679=ORIENTED_EDGE('',*,*,#8680,.T.);+#8680=EDGE_CURVE('',#8674,#8681,#8683,.T.);+#8681=VERTEX_POINT('',#8682);+#8682=CARTESIAN_POINT('',(5.83,-6.675,-1.387778780781E-16));+#8683=LINE('',#8675,#27);+#8684=ORIENTED_EDGE('',*,*,#8685,.T.);+#8685=EDGE_CURVE('',#8681,#8686,#8688,.T.);+#8686=VERTEX_POINT('',#8687);+#8687=CARTESIAN_POINT('',(5.83,-6.675,1.E-01));+#8688=LINE('',#8682,#658);+#8689=ORIENTED_EDGE('',*,*,#8690,.T.);+#8690=EDGE_CURVE('',#8686,#8691,#8693,.T.);+#8691=VERTEX_POINT('',#8692);+#8692=CARTESIAN_POINT('',(5.568163490354,-6.675,0.1));+#8693=LINE('',#8687,#72);+#8694=ORIENTED_EDGE('',*,*,#8695,.T.);+#8695=EDGE_CURVE('',#8691,#8696,#8698,.T.);+#8696=VERTEX_POINT('',#8697);+#8697=CARTESIAN_POINT('',(5.469682715053,-6.675,0.182635182233));+#8698=CIRCLE('',#8699,0.1);+#8699=AXIS2_PLACEMENT_3D('',#8678,#87,#6044);+#8700=ORIENTED_EDGE('',*,*,#8701,.T.);+#8701=EDGE_CURVE('',#8696,#8702,#8704,.T.);+#8702=VERTEX_POINT('',#8703);+#8703=CARTESIAN_POINT('',(5.376961550602,-6.675,0.734729635533));+#8704=LINE('',#8697,#6050);+#8705=ORIENTED_EDGE('',*,*,#8706,.T.);+#8706=EDGE_CURVE('',#8702,#8707,#8708,.T.);+#8707=VERTEX_POINT('',#8653);+#8708=CIRCLE('',#8709,0.2);+#8709=AXIS2_PLACEMENT_3D('',#8666,#59,#6056);+#8710=ORIENTED_EDGE('',*,*,#8711,.T.);+#8711=EDGE_CURVE('',#8707,#2264,#8652,.T.);+#8712=PLANE('',#8713);+#8713=AXIS2_PLACEMENT_3D('',#8714,#59,#13);+#8714=CARTESIAN_POINT('',(5.377811491544,-6.675,0.447016202907));+#8715=ADVANCED_FACE('',(#8716),#8730,.F.);+#8716=FACE_BOUND('',#8717,.F.);+#8717=EDGE_LOOP('',(#8718,#8719,#8726,#8729));+#8718=ORIENTED_EDGE('',*,*,#2287,.T.);+#8719=ORIENTED_EDGE('',*,*,#8720,.T.);+#8720=EDGE_CURVE('',#2282,#8721,#8723,.T.);+#8721=VERTEX_POINT('',#8722);+#8722=CARTESIAN_POINT('',(5.278480775301,-6.925,0.717364817767));+#8723=CIRCLE('',#8724,1.E-01);+#8724=AXIS2_PLACEMENT_3D('',#8725,#87,#6007);+#8725=CARTESIAN_POINT('',(5.18,-6.925,0.7));+#8726=ORIENTED_EDGE('',*,*,#8727,.F.);+#8727=EDGE_CURVE('',#8662,#8721,#8728,.T.);+#8728=LINE('',#8663,#58);+#8729=ORIENTED_EDGE('',*,*,#8661,.F.);+#8730=CYLINDRICAL_SURFACE('',#8665,1.E-01);+#8731=ADVANCED_FACE('',(#8732),#8781,.T.);+#8732=FACE_BOUND('',#8733,.T.);+#8733=EDGE_LOOP('',(#2294,#2280,#8719,#8734,#8739,#8746,#8751,#8756,#8761,#8767,#8772,#8778));+#8734=ORIENTED_EDGE('',*,*,#8735,.T.);+#8735=EDGE_CURVE('',#8721,#8736,#8738,.T.);+#8736=VERTEX_POINT('',#8737);+#8737=CARTESIAN_POINT('',(5.371201939752,-6.925,0.165270364467));+#8738=LINE('',#8722,#6013);+#8739=ORIENTED_EDGE('',*,*,#8740,.T.);+#8740=EDGE_CURVE('',#8736,#8741,#8743,.T.);+#8741=VERTEX_POINT('',#8742);+#8742=CARTESIAN_POINT('',(5.568163490354,-6.925,-1.387778780781E-16));+#8743=CIRCLE('',#8744,0.2);+#8744=AXIS2_PLACEMENT_3D('',#8745,#59,#6022);+#8745=CARTESIAN_POINT('',(5.568163490354,-6.925,0.2));+#8746=ORIENTED_EDGE('',*,*,#8747,.T.);+#8747=EDGE_CURVE('',#8741,#8748,#8750,.T.);+#8748=VERTEX_POINT('',#8749);+#8749=CARTESIAN_POINT('',(5.83,-6.925,-1.387778780781E-16));+#8750=LINE('',#8742,#27);+#8751=ORIENTED_EDGE('',*,*,#8752,.T.);+#8752=EDGE_CURVE('',#8748,#8753,#8755,.T.);+#8753=VERTEX_POINT('',#8754);+#8754=CARTESIAN_POINT('',(5.83,-6.925,1.E-01));+#8755=LINE('',#8749,#658);+#8756=ORIENTED_EDGE('',*,*,#8757,.T.);+#8757=EDGE_CURVE('',#8753,#8758,#8760,.T.);+#8758=VERTEX_POINT('',#8759);+#8759=CARTESIAN_POINT('',(5.568163490354,-6.925,0.1));+#8760=LINE('',#8754,#72);+#8761=ORIENTED_EDGE('',*,*,#8762,.T.);+#8762=EDGE_CURVE('',#8758,#8763,#8765,.T.);+#8763=VERTEX_POINT('',#8764);+#8764=CARTESIAN_POINT('',(5.469682715053,-6.925,0.182635182233));+#8765=CIRCLE('',#8766,0.1);+#8766=AXIS2_PLACEMENT_3D('',#8745,#87,#6044);+#8767=ORIENTED_EDGE('',*,*,#8768,.T.);+#8768=EDGE_CURVE('',#8763,#8769,#8771,.T.);+#8769=VERTEX_POINT('',#8770);+#8770=CARTESIAN_POINT('',(5.376961550602,-6.925,0.734729635533));+#8771=LINE('',#8764,#6050);+#8772=ORIENTED_EDGE('',*,*,#8773,.T.);+#8773=EDGE_CURVE('',#8769,#8774,#8776,.T.);+#8774=VERTEX_POINT('',#8775);+#8775=CARTESIAN_POINT('',(5.18,-6.925,0.9));+#8776=CIRCLE('',#8777,0.2);+#8777=AXIS2_PLACEMENT_3D('',#8725,#59,#6056);+#8778=ORIENTED_EDGE('',*,*,#8779,.T.);+#8779=EDGE_CURVE('',#8774,#2296,#8780,.T.);+#8780=LINE('',#8775,#72);+#8781=PLANE('',#8782);+#8782=AXIS2_PLACEMENT_3D('',#8783,#59,#13);+#8783=CARTESIAN_POINT('',(5.377811491544,-6.925,0.447016202907));+#8784=ADVANCED_FACE('',(#8785),#628,.F.);+#8785=FACE_BOUND('',#8786,.F.);+#8786=EDGE_LOOP('',(#8787,#8789,#8790,#8794));+#8787=ORIENTED_EDGE('',*,*,#8788,.F.);+#8788=EDGE_CURVE('',#2296,#2841,#8780,.T.);+#8789=ORIENTED_EDGE('',*,*,#2308,.T.);+#8790=ORIENTED_EDGE('',*,*,#8791,.T.);+#8791=EDGE_CURVE('',#2303,#2845,#8792,.T.);+#8792=LINE('',#8793,#72);+#8793=CARTESIAN_POINT('',(5.18,-7.475,0.9));+#8794=ORIENTED_EDGE('',*,*,#2844,.F.);+#8795=ADVANCED_FACE('',(#8796),#8852,.F.);+#8796=FACE_BOUND('',#8797,.F.);+#8797=EDGE_LOOP('',(#8798,#8799,#8800,#8807,#8812,#8819,#8824,#8829,#8834,#8840,#8845,#8850));+#8798=ORIENTED_EDGE('',*,*,#2302,.F.);+#8799=ORIENTED_EDGE('',*,*,#2313,.T.);+#8800=ORIENTED_EDGE('',*,*,#8801,.T.);+#8801=EDGE_CURVE('',#2314,#8802,#8804,.T.);+#8802=VERTEX_POINT('',#8803);+#8803=CARTESIAN_POINT('',(5.278480775301,-7.475,0.717364817767));+#8804=CIRCLE('',#8805,1.E-01);+#8805=AXIS2_PLACEMENT_3D('',#8806,#87,#6007);+#8806=CARTESIAN_POINT('',(5.18,-7.475,0.7));+#8807=ORIENTED_EDGE('',*,*,#8808,.T.);+#8808=EDGE_CURVE('',#8802,#8809,#8811,.T.);+#8809=VERTEX_POINT('',#8810);+#8810=CARTESIAN_POINT('',(5.371201939752,-7.475,0.165270364467));+#8811=LINE('',#8803,#6013);+#8812=ORIENTED_EDGE('',*,*,#8813,.T.);+#8813=EDGE_CURVE('',#8809,#8814,#8816,.T.);+#8814=VERTEX_POINT('',#8815);+#8815=CARTESIAN_POINT('',(5.568163490354,-7.475,-1.387778780781E-16));+#8816=CIRCLE('',#8817,0.2);+#8817=AXIS2_PLACEMENT_3D('',#8818,#59,#6022);+#8818=CARTESIAN_POINT('',(5.568163490354,-7.475,0.2));+#8819=ORIENTED_EDGE('',*,*,#8820,.T.);+#8820=EDGE_CURVE('',#8814,#8821,#8823,.T.);+#8821=VERTEX_POINT('',#8822);+#8822=CARTESIAN_POINT('',(5.83,-7.475,-1.387778780781E-16));+#8823=LINE('',#8815,#27);+#8824=ORIENTED_EDGE('',*,*,#8825,.T.);+#8825=EDGE_CURVE('',#8821,#8826,#8828,.T.);+#8826=VERTEX_POINT('',#8827);+#8827=CARTESIAN_POINT('',(5.83,-7.475,1.E-01));+#8828=LINE('',#8822,#658);+#8829=ORIENTED_EDGE('',*,*,#8830,.T.);+#8830=EDGE_CURVE('',#8826,#8831,#8833,.T.);+#8831=VERTEX_POINT('',#8832);+#8832=CARTESIAN_POINT('',(5.568163490354,-7.475,0.1));+#8833=LINE('',#8827,#72);+#8834=ORIENTED_EDGE('',*,*,#8835,.T.);+#8835=EDGE_CURVE('',#8831,#8836,#8838,.T.);+#8836=VERTEX_POINT('',#8837);+#8837=CARTESIAN_POINT('',(5.469682715053,-7.475,0.182635182233));+#8838=CIRCLE('',#8839,0.1);+#8839=AXIS2_PLACEMENT_3D('',#8818,#87,#6044);+#8840=ORIENTED_EDGE('',*,*,#8841,.T.);+#8841=EDGE_CURVE('',#8836,#8842,#8844,.T.);+#8842=VERTEX_POINT('',#8843);+#8843=CARTESIAN_POINT('',(5.376961550602,-7.475,0.734729635533));+#8844=LINE('',#8837,#6050);+#8845=ORIENTED_EDGE('',*,*,#8846,.T.);+#8846=EDGE_CURVE('',#8842,#8847,#8848,.T.);+#8847=VERTEX_POINT('',#8793);+#8848=CIRCLE('',#8849,0.2);+#8849=AXIS2_PLACEMENT_3D('',#8806,#59,#6056);+#8850=ORIENTED_EDGE('',*,*,#8851,.T.);+#8851=EDGE_CURVE('',#8847,#2303,#8792,.T.);+#8852=PLANE('',#8853);+#8853=AXIS2_PLACEMENT_3D('',#8854,#59,#13);+#8854=CARTESIAN_POINT('',(5.377811491544,-7.475,0.447016202907));+#8855=ADVANCED_FACE('',(#8856),#8870,.F.);+#8856=FACE_BOUND('',#8857,.F.);+#8857=EDGE_LOOP('',(#8858,#8859,#8866,#8869));+#8858=ORIENTED_EDGE('',*,*,#2326,.T.);+#8859=ORIENTED_EDGE('',*,*,#8860,.T.);+#8860=EDGE_CURVE('',#2321,#8861,#8863,.T.);+#8861=VERTEX_POINT('',#8862);+#8862=CARTESIAN_POINT('',(5.278480775301,-7.725,0.717364817767));+#8863=CIRCLE('',#8864,1.E-01);+#8864=AXIS2_PLACEMENT_3D('',#8865,#87,#6007);+#8865=CARTESIAN_POINT('',(5.18,-7.725,0.7));+#8866=ORIENTED_EDGE('',*,*,#8867,.F.);+#8867=EDGE_CURVE('',#8802,#8861,#8868,.T.);+#8868=LINE('',#8803,#58);+#8869=ORIENTED_EDGE('',*,*,#8801,.F.);+#8870=CYLINDRICAL_SURFACE('',#8805,1.E-01);+#8871=ADVANCED_FACE('',(#8872),#8921,.T.);+#8872=FACE_BOUND('',#8873,.T.);+#8873=EDGE_LOOP('',(#2333,#2319,#8859,#8874,#8879,#8886,#8891,#8896,#8901,#8907,#8912,#8918));+#8874=ORIENTED_EDGE('',*,*,#8875,.T.);+#8875=EDGE_CURVE('',#8861,#8876,#8878,.T.);+#8876=VERTEX_POINT('',#8877);+#8877=CARTESIAN_POINT('',(5.371201939752,-7.725,0.165270364467));+#8878=LINE('',#8862,#6013);+#8879=ORIENTED_EDGE('',*,*,#8880,.T.);+#8880=EDGE_CURVE('',#8876,#8881,#8883,.T.);+#8881=VERTEX_POINT('',#8882);+#8882=CARTESIAN_POINT('',(5.568163490354,-7.725,-1.387778780781E-16));+#8883=CIRCLE('',#8884,0.2);+#8884=AXIS2_PLACEMENT_3D('',#8885,#59,#6022);+#8885=CARTESIAN_POINT('',(5.568163490354,-7.725,0.2));+#8886=ORIENTED_EDGE('',*,*,#8887,.T.);+#8887=EDGE_CURVE('',#8881,#8888,#8890,.T.);+#8888=VERTEX_POINT('',#8889);+#8889=CARTESIAN_POINT('',(5.83,-7.725,-1.387778780781E-16));+#8890=LINE('',#8882,#27);+#8891=ORIENTED_EDGE('',*,*,#8892,.T.);+#8892=EDGE_CURVE('',#8888,#8893,#8895,.T.);+#8893=VERTEX_POINT('',#8894);+#8894=CARTESIAN_POINT('',(5.83,-7.725,1.E-01));+#8895=LINE('',#8889,#658);+#8896=ORIENTED_EDGE('',*,*,#8897,.T.);+#8897=EDGE_CURVE('',#8893,#8898,#8900,.T.);+#8898=VERTEX_POINT('',#8899);+#8899=CARTESIAN_POINT('',(5.568163490354,-7.725,0.1));+#8900=LINE('',#8894,#72);+#8901=ORIENTED_EDGE('',*,*,#8902,.T.);+#8902=EDGE_CURVE('',#8898,#8903,#8905,.T.);+#8903=VERTEX_POINT('',#8904);+#8904=CARTESIAN_POINT('',(5.469682715053,-7.725,0.182635182233));+#8905=CIRCLE('',#8906,0.1);+#8906=AXIS2_PLACEMENT_3D('',#8885,#87,#6044);+#8907=ORIENTED_EDGE('',*,*,#8908,.T.);+#8908=EDGE_CURVE('',#8903,#8909,#8911,.T.);+#8909=VERTEX_POINT('',#8910);+#8910=CARTESIAN_POINT('',(5.376961550602,-7.725,0.734729635533));+#8911=LINE('',#8904,#6050);+#8912=ORIENTED_EDGE('',*,*,#8913,.T.);+#8913=EDGE_CURVE('',#8909,#8914,#8916,.T.);+#8914=VERTEX_POINT('',#8915);+#8915=CARTESIAN_POINT('',(5.18,-7.725,0.9));+#8916=CIRCLE('',#8917,0.2);+#8917=AXIS2_PLACEMENT_3D('',#8865,#59,#6056);+#8918=ORIENTED_EDGE('',*,*,#8919,.T.);+#8919=EDGE_CURVE('',#8914,#2335,#8920,.T.);+#8920=LINE('',#8915,#72);+#8921=PLANE('',#8922);+#8922=AXIS2_PLACEMENT_3D('',#8923,#59,#13);+#8923=CARTESIAN_POINT('',(5.377811491544,-7.725,0.447016202907));+#8924=ADVANCED_FACE('',(#8925),#628,.F.);+#8925=FACE_BOUND('',#8926,.F.);+#8926=EDGE_LOOP('',(#8927,#8929,#8930,#8934));+#8927=ORIENTED_EDGE('',*,*,#8928,.F.);+#8928=EDGE_CURVE('',#2335,#2849,#8920,.T.);+#8929=ORIENTED_EDGE('',*,*,#2347,.T.);+#8930=ORIENTED_EDGE('',*,*,#8931,.T.);+#8931=EDGE_CURVE('',#2342,#2853,#8932,.T.);+#8932=LINE('',#8933,#72);+#8933=CARTESIAN_POINT('',(5.18,-8.275,0.9));+#8934=ORIENTED_EDGE('',*,*,#2852,.F.);+#8935=ADVANCED_FACE('',(#8936),#8992,.F.);+#8936=FACE_BOUND('',#8937,.F.);+#8937=EDGE_LOOP('',(#8938,#8939,#8940,#8947,#8952,#8959,#8964,#8969,#8974,#8980,#8985,#8990));+#8938=ORIENTED_EDGE('',*,*,#2341,.F.);+#8939=ORIENTED_EDGE('',*,*,#2352,.T.);+#8940=ORIENTED_EDGE('',*,*,#8941,.T.);+#8941=EDGE_CURVE('',#2353,#8942,#8944,.T.);+#8942=VERTEX_POINT('',#8943);+#8943=CARTESIAN_POINT('',(5.278480775301,-8.275,0.717364817767));+#8944=CIRCLE('',#8945,1.E-01);+#8945=AXIS2_PLACEMENT_3D('',#8946,#87,#6007);+#8946=CARTESIAN_POINT('',(5.18,-8.275,0.7));+#8947=ORIENTED_EDGE('',*,*,#8948,.T.);+#8948=EDGE_CURVE('',#8942,#8949,#8951,.T.);+#8949=VERTEX_POINT('',#8950);+#8950=CARTESIAN_POINT('',(5.371201939752,-8.275,0.165270364467));+#8951=LINE('',#8943,#6013);+#8952=ORIENTED_EDGE('',*,*,#8953,.T.);+#8953=EDGE_CURVE('',#8949,#8954,#8956,.T.);+#8954=VERTEX_POINT('',#8955);+#8955=CARTESIAN_POINT('',(5.568163490354,-8.275,-1.387778780781E-16));+#8956=CIRCLE('',#8957,0.2);+#8957=AXIS2_PLACEMENT_3D('',#8958,#59,#6022);+#8958=CARTESIAN_POINT('',(5.568163490354,-8.275,0.2));+#8959=ORIENTED_EDGE('',*,*,#8960,.T.);+#8960=EDGE_CURVE('',#8954,#8961,#8963,.T.);+#8961=VERTEX_POINT('',#8962);+#8962=CARTESIAN_POINT('',(5.83,-8.275,-1.387778780781E-16));+#8963=LINE('',#8955,#27);+#8964=ORIENTED_EDGE('',*,*,#8965,.T.);+#8965=EDGE_CURVE('',#8961,#8966,#8968,.T.);+#8966=VERTEX_POINT('',#8967);+#8967=CARTESIAN_POINT('',(5.83,-8.275,1.E-01));+#8968=LINE('',#8962,#658);+#8969=ORIENTED_EDGE('',*,*,#8970,.T.);+#8970=EDGE_CURVE('',#8966,#8971,#8973,.T.);+#8971=VERTEX_POINT('',#8972);+#8972=CARTESIAN_POINT('',(5.568163490354,-8.275,0.1));+#8973=LINE('',#8967,#72);+#8974=ORIENTED_EDGE('',*,*,#8975,.T.);+#8975=EDGE_CURVE('',#8971,#8976,#8978,.T.);+#8976=VERTEX_POINT('',#8977);+#8977=CARTESIAN_POINT('',(5.469682715053,-8.275,0.182635182233));+#8978=CIRCLE('',#8979,0.1);+#8979=AXIS2_PLACEMENT_3D('',#8958,#87,#6044);+#8980=ORIENTED_EDGE('',*,*,#8981,.T.);+#8981=EDGE_CURVE('',#8976,#8982,#8984,.T.);+#8982=VERTEX_POINT('',#8983);+#8983=CARTESIAN_POINT('',(5.376961550602,-8.275,0.734729635533));+#8984=LINE('',#8977,#6050);+#8985=ORIENTED_EDGE('',*,*,#8986,.T.);+#8986=EDGE_CURVE('',#8982,#8987,#8988,.T.);+#8987=VERTEX_POINT('',#8933);+#8988=CIRCLE('',#8989,0.2);+#8989=AXIS2_PLACEMENT_3D('',#8946,#59,#6056);+#8990=ORIENTED_EDGE('',*,*,#8991,.T.);+#8991=EDGE_CURVE('',#8987,#2342,#8932,.T.);+#8992=PLANE('',#8993);+#8993=AXIS2_PLACEMENT_3D('',#8994,#59,#13);+#8994=CARTESIAN_POINT('',(5.377811491544,-8.275,0.447016202907));+#8995=ADVANCED_FACE('',(#8996),#9010,.F.);+#8996=FACE_BOUND('',#8997,.F.);+#8997=EDGE_LOOP('',(#8998,#8999,#9006,#9009));+#8998=ORIENTED_EDGE('',*,*,#2365,.T.);+#8999=ORIENTED_EDGE('',*,*,#9000,.T.);+#9000=EDGE_CURVE('',#2360,#9001,#9003,.T.);+#9001=VERTEX_POINT('',#9002);+#9002=CARTESIAN_POINT('',(5.278480775301,-8.525,0.717364817767));+#9003=CIRCLE('',#9004,1.E-01);+#9004=AXIS2_PLACEMENT_3D('',#9005,#87,#6007);+#9005=CARTESIAN_POINT('',(5.18,-8.525,0.7));+#9006=ORIENTED_EDGE('',*,*,#9007,.F.);+#9007=EDGE_CURVE('',#8942,#9001,#9008,.T.);+#9008=LINE('',#8943,#58);+#9009=ORIENTED_EDGE('',*,*,#8941,.F.);+#9010=CYLINDRICAL_SURFACE('',#8945,1.E-01);+#9011=ADVANCED_FACE('',(#9012),#9059,.T.);+#9012=FACE_BOUND('',#9013,.T.);+#9013=EDGE_LOOP('',(#2372,#2358,#8999,#9014,#9019,#9026,#9031,#9036,#9041,#9047,#9052,#9057));+#9014=ORIENTED_EDGE('',*,*,#9015,.T.);+#9015=EDGE_CURVE('',#9001,#9016,#9018,.T.);+#9016=VERTEX_POINT('',#9017);+#9017=CARTESIAN_POINT('',(5.371201939752,-8.525,0.165270364467));+#9018=LINE('',#9002,#6013);+#9019=ORIENTED_EDGE('',*,*,#9020,.T.);+#9020=EDGE_CURVE('',#9016,#9021,#9023,.T.);+#9021=VERTEX_POINT('',#9022);+#9022=CARTESIAN_POINT('',(5.568163490354,-8.525,-1.387778780781E-16));+#9023=CIRCLE('',#9024,0.2);+#9024=AXIS2_PLACEMENT_3D('',#9025,#59,#6022);+#9025=CARTESIAN_POINT('',(5.568163490354,-8.525,0.2));+#9026=ORIENTED_EDGE('',*,*,#9027,.T.);+#9027=EDGE_CURVE('',#9021,#9028,#9030,.T.);+#9028=VERTEX_POINT('',#9029);+#9029=CARTESIAN_POINT('',(5.83,-8.525,-1.387778780781E-16));+#9030=LINE('',#9022,#27);+#9031=ORIENTED_EDGE('',*,*,#9032,.T.);+#9032=EDGE_CURVE('',#9028,#9033,#9035,.T.);+#9033=VERTEX_POINT('',#9034);+#9034=CARTESIAN_POINT('',(5.83,-8.525,1.E-01));+#9035=LINE('',#9029,#658);+#9036=ORIENTED_EDGE('',*,*,#9037,.T.);+#9037=EDGE_CURVE('',#9033,#9038,#9040,.T.);+#9038=VERTEX_POINT('',#9039);+#9039=CARTESIAN_POINT('',(5.568163490354,-8.525,0.1));+#9040=LINE('',#9034,#72);+#9041=ORIENTED_EDGE('',*,*,#9042,.T.);+#9042=EDGE_CURVE('',#9038,#9043,#9045,.T.);+#9043=VERTEX_POINT('',#9044);+#9044=CARTESIAN_POINT('',(5.469682715053,-8.525,0.182635182233));+#9045=CIRCLE('',#9046,0.1);+#9046=AXIS2_PLACEMENT_3D('',#9025,#87,#6044);+#9047=ORIENTED_EDGE('',*,*,#9048,.T.);+#9048=EDGE_CURVE('',#9043,#9049,#9051,.T.);+#9049=VERTEX_POINT('',#9050);+#9050=CARTESIAN_POINT('',(5.376961550602,-8.525,0.734729635533));+#9051=LINE('',#9044,#6050);+#9052=ORIENTED_EDGE('',*,*,#9053,.T.);+#9053=EDGE_CURVE('',#9049,#9054,#9055,.T.);+#9054=VERTEX_POINT('',#2919);+#9055=CIRCLE('',#9056,0.2);+#9056=AXIS2_PLACEMENT_3D('',#9005,#59,#6056);+#9057=ORIENTED_EDGE('',*,*,#9058,.T.);+#9058=EDGE_CURVE('',#9054,#2374,#2918,.T.);+#9059=PLANE('',#9060);+#9060=AXIS2_PLACEMENT_3D('',#9061,#59,#13);+#9061=CARTESIAN_POINT('',(5.377811491544,-8.525,0.447016202907));+#9062=ADVANCED_FACE('',(#9063),#9070,.T.);+#9063=FACE_BOUND('',#9064,.F.);+#9064=EDGE_LOOP('',(#9065,#5988,#9068,#9069));+#9065=ORIENTED_EDGE('',*,*,#9066,.T.);+#9066=EDGE_CURVE('',#5920,#5985,#9067,.T.);+#9067=LINE('',#5921,#684);+#9068=ORIENTED_EDGE('',*,*,#2436,.F.);+#9069=ORIENTED_EDGE('',*,*,#5924,.F.);+#9070=CYLINDRICAL_SURFACE('',#9071,0.2);+#9071=AXIS2_PLACEMENT_3D('',#5884,#2936,#2990);+#9072=ADVANCED_FACE('',(#9073),#9082,.F.);+#9073=FACE_BOUND('',#9074,.F.);+#9074=EDGE_LOOP('',(#9075,#9076,#3059,#9079,#9080,#9081));+#9075=ORIENTED_EDGE('',*,*,#2992,.F.);+#9076=ORIENTED_EDGE('',*,*,#9077,.T.);+#9077=EDGE_CURVE('',#2986,#3055,#9078,.T.);+#9078=LINE('',#2900,#684);+#9079=ORIENTED_EDGE('',*,*,#3075,.T.);+#9080=ORIENTED_EDGE('',*,*,#2460,.F.);+#9081=ORIENTED_EDGE('',*,*,#2898,.F.);+#9082=PLANE('',#9083);+#9083=AXIS2_PLACEMENT_3D('',#2900,#2450,#623);+#9084=ADVANCED_FACE('',(#9085),#9094,.F.);+#9085=FACE_BOUND('',#9086,.F.);+#9086=EDGE_LOOP('',(#9087,#9088,#3199,#9091,#9092,#9093));+#9087=ORIENTED_EDGE('',*,*,#3132,.F.);+#9088=ORIENTED_EDGE('',*,*,#9089,.T.);+#9089=EDGE_CURVE('',#3128,#3195,#9090,.T.);+#9090=LINE('',#3072,#684);+#9091=ORIENTED_EDGE('',*,*,#3215,.T.);+#9092=ORIENTED_EDGE('',*,*,#2468,.F.);+#9093=ORIENTED_EDGE('',*,*,#3070,.F.);+#9094=PLANE('',#9095);+#9095=AXIS2_PLACEMENT_3D('',#3072,#2450,#623);+#9096=ADVANCED_FACE('',(#9097),#9106,.F.);+#9097=FACE_BOUND('',#9098,.F.);+#9098=EDGE_LOOP('',(#9099,#9100,#3339,#9103,#9104,#9105));+#9099=ORIENTED_EDGE('',*,*,#3272,.F.);+#9100=ORIENTED_EDGE('',*,*,#9101,.T.);+#9101=EDGE_CURVE('',#3268,#3335,#9102,.T.);+#9102=LINE('',#3212,#684);+#9103=ORIENTED_EDGE('',*,*,#3355,.T.);+#9104=ORIENTED_EDGE('',*,*,#2476,.F.);+#9105=ORIENTED_EDGE('',*,*,#3210,.F.);+#9106=PLANE('',#9107);+#9107=AXIS2_PLACEMENT_3D('',#3212,#2450,#623);+#9108=ADVANCED_FACE('',(#9109),#9118,.F.);+#9109=FACE_BOUND('',#9110,.F.);+#9110=EDGE_LOOP('',(#9111,#9112,#3479,#9115,#9116,#9117));+#9111=ORIENTED_EDGE('',*,*,#3412,.F.);+#9112=ORIENTED_EDGE('',*,*,#9113,.T.);+#9113=EDGE_CURVE('',#3408,#3475,#9114,.T.);+#9114=LINE('',#3352,#684);+#9115=ORIENTED_EDGE('',*,*,#3495,.T.);+#9116=ORIENTED_EDGE('',*,*,#2484,.F.);+#9117=ORIENTED_EDGE('',*,*,#3350,.F.);+#9118=PLANE('',#9119);+#9119=AXIS2_PLACEMENT_3D('',#3352,#2450,#623);+#9120=ADVANCED_FACE('',(#9121),#9130,.F.);+#9121=FACE_BOUND('',#9122,.F.);+#9122=EDGE_LOOP('',(#9123,#9124,#3619,#9127,#9128,#9129));+#9123=ORIENTED_EDGE('',*,*,#3552,.F.);+#9124=ORIENTED_EDGE('',*,*,#9125,.T.);+#9125=EDGE_CURVE('',#3548,#3615,#9126,.T.);+#9126=LINE('',#3492,#684);+#9127=ORIENTED_EDGE('',*,*,#3635,.T.);+#9128=ORIENTED_EDGE('',*,*,#2492,.F.);+#9129=ORIENTED_EDGE('',*,*,#3490,.F.);+#9130=PLANE('',#9131);+#9131=AXIS2_PLACEMENT_3D('',#3492,#2450,#623);+#9132=ADVANCED_FACE('',(#9133),#9142,.F.);+#9133=FACE_BOUND('',#9134,.F.);+#9134=EDGE_LOOP('',(#9135,#9136,#3759,#9139,#9140,#9141));+#9135=ORIENTED_EDGE('',*,*,#3692,.F.);+#9136=ORIENTED_EDGE('',*,*,#9137,.T.);+#9137=EDGE_CURVE('',#3688,#3755,#9138,.T.);+#9138=LINE('',#3632,#684);+#9139=ORIENTED_EDGE('',*,*,#3775,.T.);+#9140=ORIENTED_EDGE('',*,*,#2500,.F.);+#9141=ORIENTED_EDGE('',*,*,#3630,.F.);+#9142=PLANE('',#9143);+#9143=AXIS2_PLACEMENT_3D('',#3632,#2450,#623);+#9144=ADVANCED_FACE('',(#9145),#9154,.F.);+#9145=FACE_BOUND('',#9146,.F.);+#9146=EDGE_LOOP('',(#9147,#9148,#3899,#9151,#9152,#9153));+#9147=ORIENTED_EDGE('',*,*,#3832,.F.);+#9148=ORIENTED_EDGE('',*,*,#9149,.T.);+#9149=EDGE_CURVE('',#3828,#3895,#9150,.T.);+#9150=LINE('',#3772,#684);+#9151=ORIENTED_EDGE('',*,*,#3915,.T.);+#9152=ORIENTED_EDGE('',*,*,#2508,.F.);+#9153=ORIENTED_EDGE('',*,*,#3770,.F.);+#9154=PLANE('',#9155);+#9155=AXIS2_PLACEMENT_3D('',#3772,#2450,#623);+#9156=ADVANCED_FACE('',(#9157),#9166,.F.);+#9157=FACE_BOUND('',#9158,.F.);+#9158=EDGE_LOOP('',(#9159,#9160,#4039,#9163,#9164,#9165));+#9159=ORIENTED_EDGE('',*,*,#3972,.F.);+#9160=ORIENTED_EDGE('',*,*,#9161,.T.);+#9161=EDGE_CURVE('',#3968,#4035,#9162,.T.);+#9162=LINE('',#3912,#684);+#9163=ORIENTED_EDGE('',*,*,#4055,.T.);+#9164=ORIENTED_EDGE('',*,*,#2516,.F.);+#9165=ORIENTED_EDGE('',*,*,#3910,.F.);+#9166=PLANE('',#9167);+#9167=AXIS2_PLACEMENT_3D('',#3912,#2450,#623);+#9168=ADVANCED_FACE('',(#9169),#9178,.F.);+#9169=FACE_BOUND('',#9170,.F.);+#9170=EDGE_LOOP('',(#9171,#9172,#4179,#9175,#9176,#9177));+#9171=ORIENTED_EDGE('',*,*,#4112,.F.);+#9172=ORIENTED_EDGE('',*,*,#9173,.T.);+#9173=EDGE_CURVE('',#4108,#4175,#9174,.T.);+#9174=LINE('',#4052,#684);+#9175=ORIENTED_EDGE('',*,*,#4195,.T.);+#9176=ORIENTED_EDGE('',*,*,#2524,.F.);+#9177=ORIENTED_EDGE('',*,*,#4050,.F.);+#9178=PLANE('',#9179);+#9179=AXIS2_PLACEMENT_3D('',#4052,#2450,#623);+#9180=ADVANCED_FACE('',(#9181),#9190,.F.);+#9181=FACE_BOUND('',#9182,.F.);+#9182=EDGE_LOOP('',(#9183,#9184,#4319,#9187,#9188,#9189));+#9183=ORIENTED_EDGE('',*,*,#4252,.F.);+#9184=ORIENTED_EDGE('',*,*,#9185,.T.);+#9185=EDGE_CURVE('',#4248,#4315,#9186,.T.);+#9186=LINE('',#4192,#684);+#9187=ORIENTED_EDGE('',*,*,#4335,.T.);+#9188=ORIENTED_EDGE('',*,*,#2532,.F.);+#9189=ORIENTED_EDGE('',*,*,#4190,.F.);+#9190=PLANE('',#9191);+#9191=AXIS2_PLACEMENT_3D('',#4192,#2450,#623);+#9192=ADVANCED_FACE('',(#9193),#9202,.F.);+#9193=FACE_BOUND('',#9194,.F.);+#9194=EDGE_LOOP('',(#9195,#9196,#4459,#9199,#9200,#9201));+#9195=ORIENTED_EDGE('',*,*,#4392,.F.);+#9196=ORIENTED_EDGE('',*,*,#9197,.T.);+#9197=EDGE_CURVE('',#4388,#4455,#9198,.T.);+#9198=LINE('',#4332,#684);+#9199=ORIENTED_EDGE('',*,*,#4475,.T.);+#9200=ORIENTED_EDGE('',*,*,#2540,.F.);+#9201=ORIENTED_EDGE('',*,*,#4330,.F.);+#9202=PLANE('',#9203);+#9203=AXIS2_PLACEMENT_3D('',#4332,#2450,#623);+#9204=ADVANCED_FACE('',(#9205),#9214,.F.);+#9205=FACE_BOUND('',#9206,.F.);+#9206=EDGE_LOOP('',(#9207,#9208,#4599,#9211,#9212,#9213));+#9207=ORIENTED_EDGE('',*,*,#4532,.F.);+#9208=ORIENTED_EDGE('',*,*,#9209,.T.);+#9209=EDGE_CURVE('',#4528,#4595,#9210,.T.);+#9210=LINE('',#4472,#684);+#9211=ORIENTED_EDGE('',*,*,#4615,.T.);+#9212=ORIENTED_EDGE('',*,*,#2548,.F.);+#9213=ORIENTED_EDGE('',*,*,#4470,.F.);+#9214=PLANE('',#9215);+#9215=AXIS2_PLACEMENT_3D('',#4472,#2450,#623);+#9216=ADVANCED_FACE('',(#9217),#9226,.F.);+#9217=FACE_BOUND('',#9218,.F.);+#9218=EDGE_LOOP('',(#9219,#9220,#4739,#9223,#9224,#9225));+#9219=ORIENTED_EDGE('',*,*,#4672,.F.);+#9220=ORIENTED_EDGE('',*,*,#9221,.T.);+#9221=EDGE_CURVE('',#4668,#4735,#9222,.T.);+#9222=LINE('',#4612,#684);+#9223=ORIENTED_EDGE('',*,*,#4755,.T.);+#9224=ORIENTED_EDGE('',*,*,#2556,.F.);+#9225=ORIENTED_EDGE('',*,*,#4610,.F.);+#9226=PLANE('',#9227);+#9227=AXIS2_PLACEMENT_3D('',#4612,#2450,#623);+#9228=ADVANCED_FACE('',(#9229),#9238,.F.);+#9229=FACE_BOUND('',#9230,.F.);+#9230=EDGE_LOOP('',(#9231,#9232,#4879,#9235,#9236,#9237));+#9231=ORIENTED_EDGE('',*,*,#4812,.F.);+#9232=ORIENTED_EDGE('',*,*,#9233,.T.);+#9233=EDGE_CURVE('',#4808,#4875,#9234,.T.);+#9234=LINE('',#4752,#684);+#9235=ORIENTED_EDGE('',*,*,#4895,.T.);+#9236=ORIENTED_EDGE('',*,*,#2564,.F.);+#9237=ORIENTED_EDGE('',*,*,#4750,.F.);+#9238=PLANE('',#9239);+#9239=AXIS2_PLACEMENT_3D('',#4752,#2450,#623);+#9240=ADVANCED_FACE('',(#9241),#9250,.F.);+#9241=FACE_BOUND('',#9242,.F.);+#9242=EDGE_LOOP('',(#9243,#9244,#5019,#9247,#9248,#9249));+#9243=ORIENTED_EDGE('',*,*,#4952,.F.);+#9244=ORIENTED_EDGE('',*,*,#9245,.T.);+#9245=EDGE_CURVE('',#4948,#5015,#9246,.T.);+#9246=LINE('',#4892,#684);+#9247=ORIENTED_EDGE('',*,*,#5035,.T.);+#9248=ORIENTED_EDGE('',*,*,#2572,.F.);+#9249=ORIENTED_EDGE('',*,*,#4890,.F.);+#9250=PLANE('',#9251);+#9251=AXIS2_PLACEMENT_3D('',#4892,#2450,#623);+#9252=ADVANCED_FACE('',(#9253),#9262,.F.);+#9253=FACE_BOUND('',#9254,.F.);+#9254=EDGE_LOOP('',(#9255,#9256,#5159,#9259,#9260,#9261));+#9255=ORIENTED_EDGE('',*,*,#5092,.F.);+#9256=ORIENTED_EDGE('',*,*,#9257,.T.);+#9257=EDGE_CURVE('',#5088,#5155,#9258,.T.);+#9258=LINE('',#5032,#684);+#9259=ORIENTED_EDGE('',*,*,#5175,.T.);+#9260=ORIENTED_EDGE('',*,*,#2580,.F.);+#9261=ORIENTED_EDGE('',*,*,#5030,.F.);+#9262=PLANE('',#9263);+#9263=AXIS2_PLACEMENT_3D('',#5032,#2450,#623);+#9264=ADVANCED_FACE('',(#9265),#9274,.F.);+#9265=FACE_BOUND('',#9266,.F.);+#9266=EDGE_LOOP('',(#9267,#9268,#5299,#9271,#9272,#9273));+#9267=ORIENTED_EDGE('',*,*,#5232,.F.);+#9268=ORIENTED_EDGE('',*,*,#9269,.T.);+#9269=EDGE_CURVE('',#5228,#5295,#9270,.T.);+#9270=LINE('',#5172,#684);+#9271=ORIENTED_EDGE('',*,*,#5315,.T.);+#9272=ORIENTED_EDGE('',*,*,#2588,.F.);+#9273=ORIENTED_EDGE('',*,*,#5170,.F.);+#9274=PLANE('',#9275);+#9275=AXIS2_PLACEMENT_3D('',#5172,#2450,#623);+#9276=ADVANCED_FACE('',(#9277),#9286,.F.);+#9277=FACE_BOUND('',#9278,.F.);+#9278=EDGE_LOOP('',(#9279,#9280,#5439,#9283,#9284,#9285));+#9279=ORIENTED_EDGE('',*,*,#5372,.F.);+#9280=ORIENTED_EDGE('',*,*,#9281,.T.);+#9281=EDGE_CURVE('',#5368,#5435,#9282,.T.);+#9282=LINE('',#5312,#684);+#9283=ORIENTED_EDGE('',*,*,#5455,.T.);+#9284=ORIENTED_EDGE('',*,*,#2596,.F.);+#9285=ORIENTED_EDGE('',*,*,#5310,.F.);+#9286=PLANE('',#9287);+#9287=AXIS2_PLACEMENT_3D('',#5312,#2450,#623);+#9288=ADVANCED_FACE('',(#9289),#9298,.F.);+#9289=FACE_BOUND('',#9290,.F.);+#9290=EDGE_LOOP('',(#9291,#9292,#5579,#9295,#9296,#9297));+#9291=ORIENTED_EDGE('',*,*,#5512,.F.);+#9292=ORIENTED_EDGE('',*,*,#9293,.T.);+#9293=EDGE_CURVE('',#5508,#5575,#9294,.T.);+#9294=LINE('',#5452,#684);+#9295=ORIENTED_EDGE('',*,*,#5595,.T.);+#9296=ORIENTED_EDGE('',*,*,#2604,.F.);+#9297=ORIENTED_EDGE('',*,*,#5450,.F.);+#9298=PLANE('',#9299);+#9299=AXIS2_PLACEMENT_3D('',#5452,#2450,#623);+#9300=ADVANCED_FACE('',(#9301),#9310,.F.);+#9301=FACE_BOUND('',#9302,.F.);+#9302=EDGE_LOOP('',(#9303,#9304,#5719,#9307,#9308,#9309));+#9303=ORIENTED_EDGE('',*,*,#5652,.F.);+#9304=ORIENTED_EDGE('',*,*,#9305,.T.);+#9305=EDGE_CURVE('',#5648,#5715,#9306,.T.);+#9306=LINE('',#5592,#684);+#9307=ORIENTED_EDGE('',*,*,#5735,.T.);+#9308=ORIENTED_EDGE('',*,*,#2612,.F.);+#9309=ORIENTED_EDGE('',*,*,#5590,.F.);+#9310=PLANE('',#9311);+#9311=AXIS2_PLACEMENT_3D('',#5592,#2450,#623);+#9312=ADVANCED_FACE('',(#9313),#9322,.F.);+#9313=FACE_BOUND('',#9314,.F.);+#9314=EDGE_LOOP('',(#9315,#9316,#5859,#9319,#9320,#9321));+#9315=ORIENTED_EDGE('',*,*,#5792,.F.);+#9316=ORIENTED_EDGE('',*,*,#9317,.T.);+#9317=EDGE_CURVE('',#5788,#5855,#9318,.T.);+#9318=LINE('',#5732,#684);+#9319=ORIENTED_EDGE('',*,*,#5872,.T.);+#9320=ORIENTED_EDGE('',*,*,#2620,.F.);+#9321=ORIENTED_EDGE('',*,*,#5730,.F.);+#9322=PLANE('',#9323);+#9323=AXIS2_PLACEMENT_3D('',#5732,#2450,#623);+#9324=ADVANCED_FACE('',(#9325,#9340),#9350,.T.);+#9325=FACE_BOUND('',#9326,.T.);+#9326=EDGE_LOOP('',(#2664,#2650,#2632,#9327,#9332,#9337,#2868,#2678));+#9327=ORIENTED_EDGE('',*,*,#9328,.F.);+#9328=EDGE_CURVE('',#9329,#2634,#9331,.T.);+#9329=VERTEX_POINT('',#9330);+#9330=CARTESIAN_POINT('',(-4.812065445886,-9.019130891773,1.6));+#9331=LINE('',#9330,#79);+#9332=ORIENTED_EDGE('',*,*,#9333,.F.);+#9333=EDGE_CURVE('',#9334,#9329,#9336,.T.);+#9334=VERTEX_POINT('',#9335);+#9335=CARTESIAN_POINT('',(4.812065445886,-9.019130891773,1.6));+#9336=LINE('',#9335,#72);+#9337=ORIENTED_EDGE('',*,*,#9338,.F.);+#9338=EDGE_CURVE('',#2865,#9334,#9339,.T.);+#9339=LINE('',#2866,#65);+#9340=FACE_BOUND('',#9341,.T.);+#9341=EDGE_LOOP('',(#9342));+#9342=ORIENTED_EDGE('',*,*,#9343,.T.);+#9343=EDGE_CURVE('',#9344,#9344,#9346,.T.);+#9344=VERTEX_POINT('',#9345);+#9345=CARTESIAN_POINT('',(-3.994130891773,7.919130891773,1.6));+#9346=CIRCLE('',#9347,0.2);+#9347=AXIS2_PLACEMENT_3D('',#9348,#9349,#59);+#9348=CARTESIAN_POINT('',(-3.994130891773,8.119130891773,1.6));+#9349=DIRECTION('',(0.,-0.,-1.));+#9350=PLANE('',#9351);+#9351=AXIS2_PLACEMENT_3D('',#2648,#13,#9352);+#9352=DIRECTION('',(0.470730061653,-0.88227728581,0.));+#9353=ADVANCED_FACE('',(#9354),#9361,.F.);+#9354=FACE_BOUND('',#9355,.F.);+#9355=EDGE_LOOP('',(#9356,#9357,#9327,#9358));+#9356=ORIENTED_EDGE('',*,*,#2903,.T.);+#9357=ORIENTED_EDGE('',*,*,#2638,.T.);+#9358=ORIENTED_EDGE('',*,*,#9359,.F.);+#9359=EDGE_CURVE('',#2904,#9329,#9360,.T.);+#9360=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2905,#9330),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9361=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#2905,#9330),(#615,#2635)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9362=ADVANCED_FACE('',(#9363),#9372,.F.);+#9363=FACE_BOUND('',#9364,.F.);+#9364=EDGE_LOOP('',(#9365,#9366,#6258,#9369,#9370,#9371));+#9365=ORIENTED_EDGE('',*,*,#6191,.F.);+#9366=ORIENTED_EDGE('',*,*,#9367,.T.);+#9367=EDGE_CURVE('',#6187,#6254,#9368,.T.);+#9368=LINE('',#6133,#58);+#9369=ORIENTED_EDGE('',*,*,#6268,.T.);+#9370=ORIENTED_EDGE('',*,*,#2696,.F.);+#9371=ORIENTED_EDGE('',*,*,#6131,.F.);+#9372=PLANE('',#9373);+#9373=AXIS2_PLACEMENT_3D('',#6133,#2450,#73);+#9374=ADVANCED_FACE('',(#9375),#9384,.F.);+#9375=FACE_BOUND('',#9376,.F.);+#9376=EDGE_LOOP('',(#9377,#9378,#6398,#9381,#9382,#9383));+#9377=ORIENTED_EDGE('',*,*,#6331,.F.);+#9378=ORIENTED_EDGE('',*,*,#9379,.T.);+#9379=EDGE_CURVE('',#6327,#6394,#9380,.T.);+#9380=LINE('',#6273,#58);+#9381=ORIENTED_EDGE('',*,*,#6408,.T.);+#9382=ORIENTED_EDGE('',*,*,#2704,.F.);+#9383=ORIENTED_EDGE('',*,*,#6271,.F.);+#9384=PLANE('',#9385);+#9385=AXIS2_PLACEMENT_3D('',#6273,#2450,#73);+#9386=ADVANCED_FACE('',(#9387),#9396,.F.);+#9387=FACE_BOUND('',#9388,.F.);+#9388=EDGE_LOOP('',(#9389,#9390,#6538,#9393,#9394,#9395));+#9389=ORIENTED_EDGE('',*,*,#6471,.F.);+#9390=ORIENTED_EDGE('',*,*,#9391,.T.);+#9391=EDGE_CURVE('',#6467,#6534,#9392,.T.);+#9392=LINE('',#6413,#58);+#9393=ORIENTED_EDGE('',*,*,#6548,.T.);+#9394=ORIENTED_EDGE('',*,*,#2712,.F.);+#9395=ORIENTED_EDGE('',*,*,#6411,.F.);+#9396=PLANE('',#9397);+#9397=AXIS2_PLACEMENT_3D('',#6413,#2450,#73);+#9398=ADVANCED_FACE('',(#9399),#9408,.F.);+#9399=FACE_BOUND('',#9400,.F.);+#9400=EDGE_LOOP('',(#9401,#9402,#6678,#9405,#9406,#9407));+#9401=ORIENTED_EDGE('',*,*,#6611,.F.);+#9402=ORIENTED_EDGE('',*,*,#9403,.T.);+#9403=EDGE_CURVE('',#6607,#6674,#9404,.T.);+#9404=LINE('',#6553,#58);+#9405=ORIENTED_EDGE('',*,*,#6688,.T.);+#9406=ORIENTED_EDGE('',*,*,#2720,.F.);+#9407=ORIENTED_EDGE('',*,*,#6551,.F.);+#9408=PLANE('',#9409);+#9409=AXIS2_PLACEMENT_3D('',#6553,#2450,#73);+#9410=ADVANCED_FACE('',(#9411),#9420,.F.);+#9411=FACE_BOUND('',#9412,.F.);+#9412=EDGE_LOOP('',(#9413,#9414,#6818,#9417,#9418,#9419));+#9413=ORIENTED_EDGE('',*,*,#6751,.F.);+#9414=ORIENTED_EDGE('',*,*,#9415,.T.);+#9415=EDGE_CURVE('',#6747,#6814,#9416,.T.);+#9416=LINE('',#6693,#58);+#9417=ORIENTED_EDGE('',*,*,#6828,.T.);+#9418=ORIENTED_EDGE('',*,*,#2728,.F.);+#9419=ORIENTED_EDGE('',*,*,#6691,.F.);+#9420=PLANE('',#9421);+#9421=AXIS2_PLACEMENT_3D('',#6693,#2450,#73);+#9422=ADVANCED_FACE('',(#9423),#9432,.F.);+#9423=FACE_BOUND('',#9424,.F.);+#9424=EDGE_LOOP('',(#9425,#9426,#6958,#9429,#9430,#9431));+#9425=ORIENTED_EDGE('',*,*,#6891,.F.);+#9426=ORIENTED_EDGE('',*,*,#9427,.T.);+#9427=EDGE_CURVE('',#6887,#6954,#9428,.T.);+#9428=LINE('',#6833,#58);+#9429=ORIENTED_EDGE('',*,*,#6968,.T.);+#9430=ORIENTED_EDGE('',*,*,#2736,.F.);+#9431=ORIENTED_EDGE('',*,*,#6831,.F.);+#9432=PLANE('',#9433);+#9433=AXIS2_PLACEMENT_3D('',#6833,#2450,#73);+#9434=ADVANCED_FACE('',(#9435),#9444,.F.);+#9435=FACE_BOUND('',#9436,.F.);+#9436=EDGE_LOOP('',(#9437,#9438,#7098,#9441,#9442,#9443));+#9437=ORIENTED_EDGE('',*,*,#7031,.F.);+#9438=ORIENTED_EDGE('',*,*,#9439,.T.);+#9439=EDGE_CURVE('',#7027,#7094,#9440,.T.);+#9440=LINE('',#6973,#58);+#9441=ORIENTED_EDGE('',*,*,#7108,.T.);+#9442=ORIENTED_EDGE('',*,*,#2744,.F.);+#9443=ORIENTED_EDGE('',*,*,#6971,.F.);+#9444=PLANE('',#9445);+#9445=AXIS2_PLACEMENT_3D('',#6973,#2450,#73);+#9446=ADVANCED_FACE('',(#9447),#9456,.F.);+#9447=FACE_BOUND('',#9448,.F.);+#9448=EDGE_LOOP('',(#9449,#9450,#7238,#9453,#9454,#9455));+#9449=ORIENTED_EDGE('',*,*,#7171,.F.);+#9450=ORIENTED_EDGE('',*,*,#9451,.T.);+#9451=EDGE_CURVE('',#7167,#7234,#9452,.T.);+#9452=LINE('',#7113,#58);+#9453=ORIENTED_EDGE('',*,*,#7248,.T.);+#9454=ORIENTED_EDGE('',*,*,#2752,.F.);+#9455=ORIENTED_EDGE('',*,*,#7111,.F.);+#9456=PLANE('',#9457);+#9457=AXIS2_PLACEMENT_3D('',#7113,#2450,#73);+#9458=ADVANCED_FACE('',(#9459),#9468,.F.);+#9459=FACE_BOUND('',#9460,.F.);+#9460=EDGE_LOOP('',(#9461,#9462,#7378,#9465,#9466,#9467));+#9461=ORIENTED_EDGE('',*,*,#7311,.F.);+#9462=ORIENTED_EDGE('',*,*,#9463,.T.);+#9463=EDGE_CURVE('',#7307,#7374,#9464,.T.);+#9464=LINE('',#7253,#58);+#9465=ORIENTED_EDGE('',*,*,#7388,.T.);+#9466=ORIENTED_EDGE('',*,*,#2760,.F.);+#9467=ORIENTED_EDGE('',*,*,#7251,.F.);+#9468=PLANE('',#9469);+#9469=AXIS2_PLACEMENT_3D('',#7253,#2450,#73);+#9470=ADVANCED_FACE('',(#9471),#9480,.F.);+#9471=FACE_BOUND('',#9472,.F.);+#9472=EDGE_LOOP('',(#9473,#9474,#7518,#9477,#9478,#9479));+#9473=ORIENTED_EDGE('',*,*,#7451,.F.);+#9474=ORIENTED_EDGE('',*,*,#9475,.T.);+#9475=EDGE_CURVE('',#7447,#7514,#9476,.T.);+#9476=LINE('',#7393,#58);+#9477=ORIENTED_EDGE('',*,*,#7528,.T.);+#9478=ORIENTED_EDGE('',*,*,#2768,.F.);+#9479=ORIENTED_EDGE('',*,*,#7391,.F.);+#9480=PLANE('',#9481);+#9481=AXIS2_PLACEMENT_3D('',#7393,#2450,#73);+#9482=ADVANCED_FACE('',(#9483),#9492,.F.);+#9483=FACE_BOUND('',#9484,.F.);+#9484=EDGE_LOOP('',(#9485,#9486,#7658,#9489,#9490,#9491));+#9485=ORIENTED_EDGE('',*,*,#7591,.F.);+#9486=ORIENTED_EDGE('',*,*,#9487,.T.);+#9487=EDGE_CURVE('',#7587,#7654,#9488,.T.);+#9488=LINE('',#7533,#58);+#9489=ORIENTED_EDGE('',*,*,#7668,.T.);+#9490=ORIENTED_EDGE('',*,*,#2776,.F.);+#9491=ORIENTED_EDGE('',*,*,#7531,.F.);+#9492=PLANE('',#9493);+#9493=AXIS2_PLACEMENT_3D('',#7533,#2450,#73);+#9494=ADVANCED_FACE('',(#9495),#9504,.F.);+#9495=FACE_BOUND('',#9496,.F.);+#9496=EDGE_LOOP('',(#9497,#9498,#7798,#9501,#9502,#9503));+#9497=ORIENTED_EDGE('',*,*,#7731,.F.);+#9498=ORIENTED_EDGE('',*,*,#9499,.T.);+#9499=EDGE_CURVE('',#7727,#7794,#9500,.T.);+#9500=LINE('',#7673,#58);+#9501=ORIENTED_EDGE('',*,*,#7808,.T.);+#9502=ORIENTED_EDGE('',*,*,#2784,.F.);+#9503=ORIENTED_EDGE('',*,*,#7671,.F.);+#9504=PLANE('',#9505);+#9505=AXIS2_PLACEMENT_3D('',#7673,#2450,#73);+#9506=ADVANCED_FACE('',(#9507),#9516,.F.);+#9507=FACE_BOUND('',#9508,.F.);+#9508=EDGE_LOOP('',(#9509,#9510,#7938,#9513,#9514,#9515));+#9509=ORIENTED_EDGE('',*,*,#7871,.F.);+#9510=ORIENTED_EDGE('',*,*,#9511,.T.);+#9511=EDGE_CURVE('',#7867,#7934,#9512,.T.);+#9512=LINE('',#7813,#58);+#9513=ORIENTED_EDGE('',*,*,#7948,.T.);+#9514=ORIENTED_EDGE('',*,*,#2792,.F.);+#9515=ORIENTED_EDGE('',*,*,#7811,.F.);+#9516=PLANE('',#9517);+#9517=AXIS2_PLACEMENT_3D('',#7813,#2450,#73);+#9518=ADVANCED_FACE('',(#9519),#9528,.F.);+#9519=FACE_BOUND('',#9520,.F.);+#9520=EDGE_LOOP('',(#9521,#9522,#8078,#9525,#9526,#9527));+#9521=ORIENTED_EDGE('',*,*,#8011,.F.);+#9522=ORIENTED_EDGE('',*,*,#9523,.T.);+#9523=EDGE_CURVE('',#8007,#8074,#9524,.T.);+#9524=LINE('',#7953,#58);+#9525=ORIENTED_EDGE('',*,*,#8088,.T.);+#9526=ORIENTED_EDGE('',*,*,#2800,.F.);+#9527=ORIENTED_EDGE('',*,*,#7951,.F.);+#9528=PLANE('',#9529);+#9529=AXIS2_PLACEMENT_3D('',#7953,#2450,#73);+#9530=ADVANCED_FACE('',(#9531),#9540,.F.);+#9531=FACE_BOUND('',#9532,.F.);+#9532=EDGE_LOOP('',(#9533,#9534,#8218,#9537,#9538,#9539));+#9533=ORIENTED_EDGE('',*,*,#8151,.F.);+#9534=ORIENTED_EDGE('',*,*,#9535,.T.);+#9535=EDGE_CURVE('',#8147,#8214,#9536,.T.);+#9536=LINE('',#8093,#58);+#9537=ORIENTED_EDGE('',*,*,#8228,.T.);+#9538=ORIENTED_EDGE('',*,*,#2808,.F.);+#9539=ORIENTED_EDGE('',*,*,#8091,.F.);+#9540=PLANE('',#9541);+#9541=AXIS2_PLACEMENT_3D('',#8093,#2450,#73);+#9542=ADVANCED_FACE('',(#9543),#9552,.F.);+#9543=FACE_BOUND('',#9544,.F.);+#9544=EDGE_LOOP('',(#9545,#9546,#8358,#9549,#9550,#9551));+#9545=ORIENTED_EDGE('',*,*,#8291,.F.);+#9546=ORIENTED_EDGE('',*,*,#9547,.T.);+#9547=EDGE_CURVE('',#8287,#8354,#9548,.T.);+#9548=LINE('',#8233,#58);+#9549=ORIENTED_EDGE('',*,*,#8368,.T.);+#9550=ORIENTED_EDGE('',*,*,#2816,.F.);+#9551=ORIENTED_EDGE('',*,*,#8231,.F.);+#9552=PLANE('',#9553);+#9553=AXIS2_PLACEMENT_3D('',#8233,#2450,#73);+#9554=ADVANCED_FACE('',(#9555),#9564,.F.);+#9555=FACE_BOUND('',#9556,.F.);+#9556=EDGE_LOOP('',(#9557,#9558,#8498,#9561,#9562,#9563));+#9557=ORIENTED_EDGE('',*,*,#8431,.F.);+#9558=ORIENTED_EDGE('',*,*,#9559,.T.);+#9559=EDGE_CURVE('',#8427,#8494,#9560,.T.);+#9560=LINE('',#8373,#58);+#9561=ORIENTED_EDGE('',*,*,#8508,.T.);+#9562=ORIENTED_EDGE('',*,*,#2824,.F.);+#9563=ORIENTED_EDGE('',*,*,#8371,.F.);+#9564=PLANE('',#9565);+#9565=AXIS2_PLACEMENT_3D('',#8373,#2450,#73);+#9566=ADVANCED_FACE('',(#9567),#9576,.F.);+#9567=FACE_BOUND('',#9568,.F.);+#9568=EDGE_LOOP('',(#9569,#9570,#8638,#9573,#9574,#9575));+#9569=ORIENTED_EDGE('',*,*,#8571,.F.);+#9570=ORIENTED_EDGE('',*,*,#9571,.T.);+#9571=EDGE_CURVE('',#8567,#8634,#9572,.T.);+#9572=LINE('',#8513,#58);+#9573=ORIENTED_EDGE('',*,*,#8648,.T.);+#9574=ORIENTED_EDGE('',*,*,#2832,.F.);+#9575=ORIENTED_EDGE('',*,*,#8511,.F.);+#9576=PLANE('',#9577);+#9577=AXIS2_PLACEMENT_3D('',#8513,#2450,#73);+#9578=ADVANCED_FACE('',(#9579),#9588,.F.);+#9579=FACE_BOUND('',#9580,.F.);+#9580=EDGE_LOOP('',(#9581,#9582,#8778,#9585,#9586,#9587));+#9581=ORIENTED_EDGE('',*,*,#8711,.F.);+#9582=ORIENTED_EDGE('',*,*,#9583,.T.);+#9583=EDGE_CURVE('',#8707,#8774,#9584,.T.);+#9584=LINE('',#8653,#58);+#9585=ORIENTED_EDGE('',*,*,#8788,.T.);+#9586=ORIENTED_EDGE('',*,*,#2840,.F.);+#9587=ORIENTED_EDGE('',*,*,#8651,.F.);+#9588=PLANE('',#9589);+#9589=AXIS2_PLACEMENT_3D('',#8653,#2450,#73);+#9590=ADVANCED_FACE('',(#9591),#9600,.F.);+#9591=FACE_BOUND('',#9592,.F.);+#9592=EDGE_LOOP('',(#9593,#9594,#8918,#9597,#9598,#9599));+#9593=ORIENTED_EDGE('',*,*,#8851,.F.);+#9594=ORIENTED_EDGE('',*,*,#9595,.T.);+#9595=EDGE_CURVE('',#8847,#8914,#9596,.T.);+#9596=LINE('',#8793,#58);+#9597=ORIENTED_EDGE('',*,*,#8928,.T.);+#9598=ORIENTED_EDGE('',*,*,#2848,.F.);+#9599=ORIENTED_EDGE('',*,*,#8791,.F.);+#9600=PLANE('',#9601);+#9601=AXIS2_PLACEMENT_3D('',#8793,#2450,#73);+#9602=ADVANCED_FACE('',(#9603),#9612,.F.);+#9603=FACE_BOUND('',#9604,.F.);+#9604=EDGE_LOOP('',(#9605,#9606,#9057,#9609,#9610,#9611));+#9605=ORIENTED_EDGE('',*,*,#8991,.F.);+#9606=ORIENTED_EDGE('',*,*,#9607,.T.);+#9607=EDGE_CURVE('',#8987,#9054,#9608,.T.);+#9608=LINE('',#8933,#58);+#9609=ORIENTED_EDGE('',*,*,#2917,.T.);+#9610=ORIENTED_EDGE('',*,*,#2856,.F.);+#9611=ORIENTED_EDGE('',*,*,#8931,.F.);+#9612=PLANE('',#9613);+#9613=AXIS2_PLACEMENT_3D('',#8933,#2450,#73);+#9614=ADVANCED_FACE('',(#9615),#9622,.F.);+#9615=FACE_BOUND('',#9616,.F.);+#9616=EDGE_LOOP('',(#9617,#9618,#9337,#9621));+#9617=ORIENTED_EDGE('',*,*,#2913,.T.);+#9618=ORIENTED_EDGE('',*,*,#9619,.T.);+#9619=EDGE_CURVE('',#2909,#9334,#9620,.T.);+#9620=B_SPLINE_CURVE_WITH_KNOTS('',1,(#2910,#9335),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9621=ORIENTED_EDGE('',*,*,#2864,.F.);+#9622=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#2862,#2866),(#2910,#9335)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9623=ADVANCED_FACE('',(#9624),#9631,.T.);+#9624=FACE_BOUND('',#9625,.F.);+#9625=EDGE_LOOP('',(#9626,#6118,#9629,#9630));+#9626=ORIENTED_EDGE('',*,*,#9627,.T.);+#9627=EDGE_CURVE('',#6047,#6115,#9628,.T.);+#9628=LINE('',#6048,#58);+#9629=ORIENTED_EDGE('',*,*,#2880,.F.);+#9630=ORIENTED_EDGE('',*,*,#6053,.F.);+#9631=CYLINDRICAL_SURFACE('',#9632,0.2);+#9632=AXIS2_PLACEMENT_3D('',#6006,#87,#6056);+#9633=ADVANCED_FACE('',(#9634),#9639,.F.);+#9634=FACE_BOUND('',#9635,.F.);+#9635=EDGE_LOOP('',(#9636,#9637,#9332,#9638));+#9636=ORIENTED_EDGE('',*,*,#2908,.T.);+#9637=ORIENTED_EDGE('',*,*,#9359,.T.);+#9638=ORIENTED_EDGE('',*,*,#9619,.F.);+#9639=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#2910,#9335),(#2905,#9330)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,9.735),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#9640=ADVANCED_FACE('',(#9641),#9648,.T.);+#9641=FACE_BOUND('',#9642,.F.);+#9642=EDGE_LOOP('',(#9643,#3053,#9646,#9647));+#9643=ORIENTED_EDGE('',*,*,#9644,.T.);+#9644=EDGE_CURVE('',#2979,#3050,#9645,.T.);+#9645=LINE('',#2980,#684);+#9646=ORIENTED_EDGE('',*,*,#9077,.F.);+#9647=ORIENTED_EDGE('',*,*,#2985,.F.);+#9648=CYLINDRICAL_SURFACE('',#9649,0.2);+#9649=AXIS2_PLACEMENT_3D('',#2935,#2936,#2990);+#9650=ADVANCED_FACE('',(#9651),#9658,.F.);+#9651=FACE_BOUND('',#9652,.F.);+#9652=EDGE_LOOP('',(#9653,#3048,#9656,#9657));+#9653=ORIENTED_EDGE('',*,*,#9654,.T.);+#9654=EDGE_CURVE('',#2971,#3044,#9655,.T.);+#9655=LINE('',#2972,#684);+#9656=ORIENTED_EDGE('',*,*,#9644,.F.);+#9657=ORIENTED_EDGE('',*,*,#2978,.F.);+#9658=PLANE('',#9659);+#9659=AXIS2_PLACEMENT_3D('',#2972,#9660,#2983);+#9660=DIRECTION('',(0.986188825682,-1.128434478261E-17,-0.165624877661));+#9661=ADVANCED_FACE('',(#9662),#9669,.F.);+#9662=FACE_BOUND('',#9663,.F.);+#9663=EDGE_LOOP('',(#9664,#3042,#9667,#9668));+#9664=ORIENTED_EDGE('',*,*,#9665,.T.);+#9665=EDGE_CURVE('',#2966,#3039,#9666,.T.);+#9666=LINE('',#2967,#684);+#9667=ORIENTED_EDGE('',*,*,#9654,.F.);+#9668=ORIENTED_EDGE('',*,*,#2970,.F.);+#9669=CYLINDRICAL_SURFACE('',#9670,0.1);+#9670=AXIS2_PLACEMENT_3D('',#2951,#2936,#2976);+#9671=ADVANCED_FACE('',(#9672),#9679,.F.);+#9672=FACE_BOUND('',#9673,.F.);+#9673=EDGE_LOOP('',(#9674,#3037,#9677,#9678));+#9674=ORIENTED_EDGE('',*,*,#9675,.T.);+#9675=EDGE_CURVE('',#2961,#3034,#9676,.T.);+#9676=LINE('',#2962,#684);+#9677=ORIENTED_EDGE('',*,*,#9665,.F.);+#9678=ORIENTED_EDGE('',*,*,#2965,.F.);+#9679=PLANE('',#9680);+#9680=AXIS2_PLACEMENT_3D('',#2962,#2450,#623);+#9681=ADVANCED_FACE('',(#9682),#9689,.F.);+#9682=FACE_BOUND('',#9683,.F.);+#9683=EDGE_LOOP('',(#9684,#3032,#9687,#9688));+#9684=ORIENTED_EDGE('',*,*,#9685,.T.);+#9685=EDGE_CURVE('',#2956,#3029,#9686,.T.);+#9686=LINE('',#2957,#684);+#9687=ORIENTED_EDGE('',*,*,#9675,.F.);+#9688=ORIENTED_EDGE('',*,*,#2960,.F.);+#9689=PLANE('',#9690);+#9690=AXIS2_PLACEMENT_3D('',#2957,#623,#13);+#9691=ADVANCED_FACE('',(#9692),#9699,.F.);+#9692=FACE_BOUND('',#9693,.F.);+#9693=EDGE_LOOP('',(#9694,#3027,#9697,#9698));+#9694=ORIENTED_EDGE('',*,*,#9695,.T.);+#9695=EDGE_CURVE('',#2947,#3022,#9696,.T.);+#9696=LINE('',#2948,#684);+#9697=ORIENTED_EDGE('',*,*,#9685,.F.);+#9698=ORIENTED_EDGE('',*,*,#2955,.F.);+#9699=PLANE('',#9700);+#9700=AXIS2_PLACEMENT_3D('',#2948,#13,#673);+#9701=ADVANCED_FACE('',(#9702),#9709,.T.);+#9702=FACE_BOUND('',#9703,.F.);+#9703=EDGE_LOOP('',(#9704,#3020,#9707,#9708));+#9704=ORIENTED_EDGE('',*,*,#9705,.T.);+#9705=EDGE_CURVE('',#2940,#3017,#9706,.T.);+#9706=LINE('',#2941,#684);+#9707=ORIENTED_EDGE('',*,*,#9695,.F.);+#9708=ORIENTED_EDGE('',*,*,#2946,.F.);+#9709=CYLINDRICAL_SURFACE('',#9710,0.2);+#9710=AXIS2_PLACEMENT_3D('',#2951,#2936,#2953);+#9711=ADVANCED_FACE('',(#9712),#9717,.F.);+#9712=FACE_BOUND('',#9713,.F.);+#9713=EDGE_LOOP('',(#9714,#3015,#9715,#9716));+#9714=ORIENTED_EDGE('',*,*,#3008,.T.);+#9715=ORIENTED_EDGE('',*,*,#9705,.F.);+#9716=ORIENTED_EDGE('',*,*,#2939,.F.);+#9717=PLANE('',#9718);+#9718=AXIS2_PLACEMENT_3D('',#2932,#9719,#2944);+#9719=DIRECTION('',(-0.986188825682,1.128434478261E-17,0.165624877661));+#9720=ADVANCED_FACE('',(#9721),#9728,.T.);+#9721=FACE_BOUND('',#9722,.F.);+#9722=EDGE_LOOP('',(#9723,#3193,#9726,#9727));+#9723=ORIENTED_EDGE('',*,*,#9724,.T.);+#9724=EDGE_CURVE('',#3123,#3190,#9725,.T.);+#9725=LINE('',#3124,#684);+#9726=ORIENTED_EDGE('',*,*,#9089,.F.);+#9727=ORIENTED_EDGE('',*,*,#3127,.F.);+#9728=CYLINDRICAL_SURFACE('',#9729,0.2);+#9729=AXIS2_PLACEMENT_3D('',#3087,#2936,#2990);+#9730=ADVANCED_FACE('',(#9731),#9738,.F.);+#9731=FACE_BOUND('',#9732,.F.);+#9732=EDGE_LOOP('',(#9733,#3188,#9736,#9737));+#9733=ORIENTED_EDGE('',*,*,#9734,.T.);+#9734=EDGE_CURVE('',#3117,#3184,#9735,.T.);+#9735=LINE('',#3118,#684);+#9736=ORIENTED_EDGE('',*,*,#9724,.F.);+#9737=ORIENTED_EDGE('',*,*,#3122,.F.);+#9738=PLANE('',#9739);+#9739=AXIS2_PLACEMENT_3D('',#3118,#9660,#2983);+#9740=ADVANCED_FACE('',(#9741),#9748,.F.);+#9741=FACE_BOUND('',#9742,.F.);+#9742=EDGE_LOOP('',(#9743,#3182,#9746,#9747));+#9743=ORIENTED_EDGE('',*,*,#9744,.T.);+#9744=EDGE_CURVE('',#3112,#3179,#9745,.T.);+#9745=LINE('',#3113,#684);+#9746=ORIENTED_EDGE('',*,*,#9734,.F.);+#9747=ORIENTED_EDGE('',*,*,#3116,.F.);+#9748=CYLINDRICAL_SURFACE('',#9749,0.1);+#9749=AXIS2_PLACEMENT_3D('',#3099,#2936,#2976);+#9750=ADVANCED_FACE('',(#9751),#9758,.F.);+#9751=FACE_BOUND('',#9752,.F.);+#9752=EDGE_LOOP('',(#9753,#3177,#9756,#9757));+#9753=ORIENTED_EDGE('',*,*,#9754,.T.);+#9754=EDGE_CURVE('',#3107,#3174,#9755,.T.);+#9755=LINE('',#3108,#684);+#9756=ORIENTED_EDGE('',*,*,#9744,.F.);+#9757=ORIENTED_EDGE('',*,*,#3111,.F.);+#9758=PLANE('',#9759);+#9759=AXIS2_PLACEMENT_3D('',#3108,#2450,#623);+#9760=ADVANCED_FACE('',(#9761),#9768,.F.);+#9761=FACE_BOUND('',#9762,.F.);+#9762=EDGE_LOOP('',(#9763,#3172,#9766,#9767));+#9763=ORIENTED_EDGE('',*,*,#9764,.T.);+#9764=EDGE_CURVE('',#3102,#3169,#9765,.T.);+#9765=LINE('',#3103,#684);+#9766=ORIENTED_EDGE('',*,*,#9754,.F.);+#9767=ORIENTED_EDGE('',*,*,#3106,.F.);+#9768=PLANE('',#9769);+#9769=AXIS2_PLACEMENT_3D('',#3103,#623,#13);+#9770=ADVANCED_FACE('',(#9771),#9778,.F.);+#9771=FACE_BOUND('',#9772,.F.);+#9772=EDGE_LOOP('',(#9773,#3167,#9776,#9777));+#9773=ORIENTED_EDGE('',*,*,#9774,.T.);+#9774=EDGE_CURVE('',#3095,#3162,#9775,.T.);+#9775=LINE('',#3096,#684);+#9776=ORIENTED_EDGE('',*,*,#9764,.F.);+#9777=ORIENTED_EDGE('',*,*,#3101,.F.);+#9778=PLANE('',#9779);+#9779=AXIS2_PLACEMENT_3D('',#3096,#13,#673);+#9780=ADVANCED_FACE('',(#9781),#9788,.T.);+#9781=FACE_BOUND('',#9782,.F.);+#9782=EDGE_LOOP('',(#9783,#3160,#9786,#9787));+#9783=ORIENTED_EDGE('',*,*,#9784,.T.);+#9784=EDGE_CURVE('',#3090,#3157,#9785,.T.);+#9785=LINE('',#3091,#684);+#9786=ORIENTED_EDGE('',*,*,#9774,.F.);+#9787=ORIENTED_EDGE('',*,*,#3094,.F.);+#9788=CYLINDRICAL_SURFACE('',#9789,0.2);+#9789=AXIS2_PLACEMENT_3D('',#3099,#2936,#2953);+#9790=ADVANCED_FACE('',(#9791),#9796,.F.);+#9791=FACE_BOUND('',#9792,.F.);+#9792=EDGE_LOOP('',(#9793,#3155,#9794,#9795));+#9793=ORIENTED_EDGE('',*,*,#3148,.T.);+#9794=ORIENTED_EDGE('',*,*,#9784,.F.);+#9795=ORIENTED_EDGE('',*,*,#3089,.F.);+#9796=PLANE('',#9797);+#9797=AXIS2_PLACEMENT_3D('',#3084,#9719,#2944);+#9798=ADVANCED_FACE('',(#9799),#9806,.T.);+#9799=FACE_BOUND('',#9800,.F.);+#9800=EDGE_LOOP('',(#9801,#3333,#9804,#9805));+#9801=ORIENTED_EDGE('',*,*,#9802,.T.);+#9802=EDGE_CURVE('',#3263,#3330,#9803,.T.);+#9803=LINE('',#3264,#684);+#9804=ORIENTED_EDGE('',*,*,#9101,.F.);+#9805=ORIENTED_EDGE('',*,*,#3267,.F.);+#9806=CYLINDRICAL_SURFACE('',#9807,0.2);+#9807=AXIS2_PLACEMENT_3D('',#3227,#2936,#2990);+#9808=ADVANCED_FACE('',(#9809),#9816,.F.);+#9809=FACE_BOUND('',#9810,.F.);+#9810=EDGE_LOOP('',(#9811,#3328,#9814,#9815));+#9811=ORIENTED_EDGE('',*,*,#9812,.T.);+#9812=EDGE_CURVE('',#3257,#3324,#9813,.T.);+#9813=LINE('',#3258,#684);+#9814=ORIENTED_EDGE('',*,*,#9802,.F.);+#9815=ORIENTED_EDGE('',*,*,#3262,.F.);+#9816=PLANE('',#9817);+#9817=AXIS2_PLACEMENT_3D('',#3258,#9660,#2983);+#9818=ADVANCED_FACE('',(#9819),#9826,.F.);+#9819=FACE_BOUND('',#9820,.F.);+#9820=EDGE_LOOP('',(#9821,#3322,#9824,#9825));+#9821=ORIENTED_EDGE('',*,*,#9822,.T.);+#9822=EDGE_CURVE('',#3252,#3319,#9823,.T.);+#9823=LINE('',#3253,#684);+#9824=ORIENTED_EDGE('',*,*,#9812,.F.);+#9825=ORIENTED_EDGE('',*,*,#3256,.F.);+#9826=CYLINDRICAL_SURFACE('',#9827,0.1);+#9827=AXIS2_PLACEMENT_3D('',#3239,#2936,#2976);+#9828=ADVANCED_FACE('',(#9829),#9836,.F.);+#9829=FACE_BOUND('',#9830,.F.);+#9830=EDGE_LOOP('',(#9831,#3317,#9834,#9835));+#9831=ORIENTED_EDGE('',*,*,#9832,.T.);+#9832=EDGE_CURVE('',#3247,#3314,#9833,.T.);+#9833=LINE('',#3248,#684);+#9834=ORIENTED_EDGE('',*,*,#9822,.F.);+#9835=ORIENTED_EDGE('',*,*,#3251,.F.);+#9836=PLANE('',#9837);+#9837=AXIS2_PLACEMENT_3D('',#3248,#2450,#623);+#9838=ADVANCED_FACE('',(#9839),#9846,.F.);+#9839=FACE_BOUND('',#9840,.F.);+#9840=EDGE_LOOP('',(#9841,#3312,#9844,#9845));+#9841=ORIENTED_EDGE('',*,*,#9842,.T.);+#9842=EDGE_CURVE('',#3242,#3309,#9843,.T.);+#9843=LINE('',#3243,#684);+#9844=ORIENTED_EDGE('',*,*,#9832,.F.);+#9845=ORIENTED_EDGE('',*,*,#3246,.F.);+#9846=PLANE('',#9847);+#9847=AXIS2_PLACEMENT_3D('',#3243,#623,#13);+#9848=ADVANCED_FACE('',(#9849),#9856,.F.);+#9849=FACE_BOUND('',#9850,.F.);+#9850=EDGE_LOOP('',(#9851,#3307,#9854,#9855));+#9851=ORIENTED_EDGE('',*,*,#9852,.T.);+#9852=EDGE_CURVE('',#3235,#3302,#9853,.T.);+#9853=LINE('',#3236,#684);+#9854=ORIENTED_EDGE('',*,*,#9842,.F.);+#9855=ORIENTED_EDGE('',*,*,#3241,.F.);+#9856=PLANE('',#9857);+#9857=AXIS2_PLACEMENT_3D('',#3236,#13,#673);+#9858=ADVANCED_FACE('',(#9859),#9866,.T.);+#9859=FACE_BOUND('',#9860,.F.);+#9860=EDGE_LOOP('',(#9861,#3300,#9864,#9865));+#9861=ORIENTED_EDGE('',*,*,#9862,.T.);+#9862=EDGE_CURVE('',#3230,#3297,#9863,.T.);+#9863=LINE('',#3231,#684);+#9864=ORIENTED_EDGE('',*,*,#9852,.F.);+#9865=ORIENTED_EDGE('',*,*,#3234,.F.);+#9866=CYLINDRICAL_SURFACE('',#9867,0.2);+#9867=AXIS2_PLACEMENT_3D('',#3239,#2936,#2953);+#9868=ADVANCED_FACE('',(#9869),#9874,.F.);+#9869=FACE_BOUND('',#9870,.F.);+#9870=EDGE_LOOP('',(#9871,#3295,#9872,#9873));+#9871=ORIENTED_EDGE('',*,*,#3288,.T.);+#9872=ORIENTED_EDGE('',*,*,#9862,.F.);+#9873=ORIENTED_EDGE('',*,*,#3229,.F.);+#9874=PLANE('',#9875);+#9875=AXIS2_PLACEMENT_3D('',#3224,#9719,#2944);+#9876=ADVANCED_FACE('',(#9877),#9884,.T.);+#9877=FACE_BOUND('',#9878,.F.);+#9878=EDGE_LOOP('',(#9879,#3473,#9882,#9883));+#9879=ORIENTED_EDGE('',*,*,#9880,.T.);+#9880=EDGE_CURVE('',#3403,#3470,#9881,.T.);+#9881=LINE('',#3404,#684);+#9882=ORIENTED_EDGE('',*,*,#9113,.F.);+#9883=ORIENTED_EDGE('',*,*,#3407,.F.);+#9884=CYLINDRICAL_SURFACE('',#9885,0.2);+#9885=AXIS2_PLACEMENT_3D('',#3367,#2936,#2990);+#9886=ADVANCED_FACE('',(#9887),#9894,.F.);+#9887=FACE_BOUND('',#9888,.F.);+#9888=EDGE_LOOP('',(#9889,#3468,#9892,#9893));+#9889=ORIENTED_EDGE('',*,*,#9890,.T.);+#9890=EDGE_CURVE('',#3397,#3464,#9891,.T.);+#9891=LINE('',#3398,#684);+#9892=ORIENTED_EDGE('',*,*,#9880,.F.);+#9893=ORIENTED_EDGE('',*,*,#3402,.F.);+#9894=PLANE('',#9895);+#9895=AXIS2_PLACEMENT_3D('',#3398,#9660,#2983);+#9896=ADVANCED_FACE('',(#9897),#9904,.F.);+#9897=FACE_BOUND('',#9898,.F.);+#9898=EDGE_LOOP('',(#9899,#3462,#9902,#9903));+#9899=ORIENTED_EDGE('',*,*,#9900,.T.);+#9900=EDGE_CURVE('',#3392,#3459,#9901,.T.);+#9901=LINE('',#3393,#684);+#9902=ORIENTED_EDGE('',*,*,#9890,.F.);+#9903=ORIENTED_EDGE('',*,*,#3396,.F.);+#9904=CYLINDRICAL_SURFACE('',#9905,0.1);+#9905=AXIS2_PLACEMENT_3D('',#3379,#2936,#2976);+#9906=ADVANCED_FACE('',(#9907),#9914,.F.);+#9907=FACE_BOUND('',#9908,.F.);+#9908=EDGE_LOOP('',(#9909,#3457,#9912,#9913));+#9909=ORIENTED_EDGE('',*,*,#9910,.T.);+#9910=EDGE_CURVE('',#3387,#3454,#9911,.T.);+#9911=LINE('',#3388,#684);+#9912=ORIENTED_EDGE('',*,*,#9900,.F.);+#9913=ORIENTED_EDGE('',*,*,#3391,.F.);+#9914=PLANE('',#9915);+#9915=AXIS2_PLACEMENT_3D('',#3388,#2450,#623);+#9916=ADVANCED_FACE('',(#9917),#9924,.F.);+#9917=FACE_BOUND('',#9918,.F.);+#9918=EDGE_LOOP('',(#9919,#3452,#9922,#9923));+#9919=ORIENTED_EDGE('',*,*,#9920,.T.);+#9920=EDGE_CURVE('',#3382,#3449,#9921,.T.);+#9921=LINE('',#3383,#684);+#9922=ORIENTED_EDGE('',*,*,#9910,.F.);+#9923=ORIENTED_EDGE('',*,*,#3386,.F.);+#9924=PLANE('',#9925);+#9925=AXIS2_PLACEMENT_3D('',#3383,#623,#13);+#9926=ADVANCED_FACE('',(#9927),#9934,.F.);+#9927=FACE_BOUND('',#9928,.F.);+#9928=EDGE_LOOP('',(#9929,#3447,#9932,#9933));+#9929=ORIENTED_EDGE('',*,*,#9930,.T.);+#9930=EDGE_CURVE('',#3375,#3442,#9931,.T.);+#9931=LINE('',#3376,#684);+#9932=ORIENTED_EDGE('',*,*,#9920,.F.);+#9933=ORIENTED_EDGE('',*,*,#3381,.F.);+#9934=PLANE('',#9935);+#9935=AXIS2_PLACEMENT_3D('',#3376,#13,#673);+#9936=ADVANCED_FACE('',(#9937),#9944,.T.);+#9937=FACE_BOUND('',#9938,.F.);+#9938=EDGE_LOOP('',(#9939,#3440,#9942,#9943));+#9939=ORIENTED_EDGE('',*,*,#9940,.T.);+#9940=EDGE_CURVE('',#3370,#3437,#9941,.T.);+#9941=LINE('',#3371,#684);+#9942=ORIENTED_EDGE('',*,*,#9930,.F.);+#9943=ORIENTED_EDGE('',*,*,#3374,.F.);+#9944=CYLINDRICAL_SURFACE('',#9945,0.2);+#9945=AXIS2_PLACEMENT_3D('',#3379,#2936,#2953);+#9946=ADVANCED_FACE('',(#9947),#9952,.F.);+#9947=FACE_BOUND('',#9948,.F.);+#9948=EDGE_LOOP('',(#9949,#3435,#9950,#9951));+#9949=ORIENTED_EDGE('',*,*,#3428,.T.);+#9950=ORIENTED_EDGE('',*,*,#9940,.F.);+#9951=ORIENTED_EDGE('',*,*,#3369,.F.);+#9952=PLANE('',#9953);+#9953=AXIS2_PLACEMENT_3D('',#3364,#9719,#2944);+#9954=ADVANCED_FACE('',(#9955),#9962,.T.);+#9955=FACE_BOUND('',#9956,.F.);+#9956=EDGE_LOOP('',(#9957,#3613,#9960,#9961));+#9957=ORIENTED_EDGE('',*,*,#9958,.T.);+#9958=EDGE_CURVE('',#3543,#3610,#9959,.T.);+#9959=LINE('',#3544,#684);+#9960=ORIENTED_EDGE('',*,*,#9125,.F.);+#9961=ORIENTED_EDGE('',*,*,#3547,.F.);+#9962=CYLINDRICAL_SURFACE('',#9963,0.2);+#9963=AXIS2_PLACEMENT_3D('',#3507,#2936,#2990);+#9964=ADVANCED_FACE('',(#9965),#9972,.F.);+#9965=FACE_BOUND('',#9966,.F.);+#9966=EDGE_LOOP('',(#9967,#3608,#9970,#9971));+#9967=ORIENTED_EDGE('',*,*,#9968,.T.);+#9968=EDGE_CURVE('',#3537,#3604,#9969,.T.);+#9969=LINE('',#3538,#684);+#9970=ORIENTED_EDGE('',*,*,#9958,.F.);+#9971=ORIENTED_EDGE('',*,*,#3542,.F.);+#9972=PLANE('',#9973);+#9973=AXIS2_PLACEMENT_3D('',#3538,#9660,#2983);+#9974=ADVANCED_FACE('',(#9975),#9982,.F.);+#9975=FACE_BOUND('',#9976,.F.);+#9976=EDGE_LOOP('',(#9977,#3602,#9980,#9981));+#9977=ORIENTED_EDGE('',*,*,#9978,.T.);+#9978=EDGE_CURVE('',#3532,#3599,#9979,.T.);+#9979=LINE('',#3533,#684);+#9980=ORIENTED_EDGE('',*,*,#9968,.F.);+#9981=ORIENTED_EDGE('',*,*,#3536,.F.);+#9982=CYLINDRICAL_SURFACE('',#9983,0.1);+#9983=AXIS2_PLACEMENT_3D('',#3519,#2936,#2976);+#9984=ADVANCED_FACE('',(#9985),#9992,.F.);+#9985=FACE_BOUND('',#9986,.F.);+#9986=EDGE_LOOP('',(#9987,#3597,#9990,#9991));+#9987=ORIENTED_EDGE('',*,*,#9988,.T.);+#9988=EDGE_CURVE('',#3527,#3594,#9989,.T.);+#9989=LINE('',#3528,#684);+#9990=ORIENTED_EDGE('',*,*,#9978,.F.);+#9991=ORIENTED_EDGE('',*,*,#3531,.F.);+#9992=PLANE('',#9993);+#9993=AXIS2_PLACEMENT_3D('',#3528,#2450,#623);+#9994=ADVANCED_FACE('',(#9995),#10002,.F.);+#9995=FACE_BOUND('',#9996,.F.);+#9996=EDGE_LOOP('',(#9997,#3592,#10000,#10001));+#9997=ORIENTED_EDGE('',*,*,#9998,.T.);+#9998=EDGE_CURVE('',#3522,#3589,#9999,.T.);+#9999=LINE('',#3523,#684);+#10000=ORIENTED_EDGE('',*,*,#9988,.F.);+#10001=ORIENTED_EDGE('',*,*,#3526,.F.);+#10002=PLANE('',#10003);+#10003=AXIS2_PLACEMENT_3D('',#3523,#623,#13);+#10004=ADVANCED_FACE('',(#10005),#10012,.F.);+#10005=FACE_BOUND('',#10006,.F.);+#10006=EDGE_LOOP('',(#10007,#3587,#10010,#10011));+#10007=ORIENTED_EDGE('',*,*,#10008,.T.);+#10008=EDGE_CURVE('',#3515,#3582,#10009,.T.);+#10009=LINE('',#3516,#684);+#10010=ORIENTED_EDGE('',*,*,#9998,.F.);+#10011=ORIENTED_EDGE('',*,*,#3521,.F.);+#10012=PLANE('',#10013);+#10013=AXIS2_PLACEMENT_3D('',#3516,#13,#673);+#10014=ADVANCED_FACE('',(#10015),#10022,.T.);+#10015=FACE_BOUND('',#10016,.F.);+#10016=EDGE_LOOP('',(#10017,#3580,#10020,#10021));+#10017=ORIENTED_EDGE('',*,*,#10018,.T.);+#10018=EDGE_CURVE('',#3510,#3577,#10019,.T.);+#10019=LINE('',#3511,#684);+#10020=ORIENTED_EDGE('',*,*,#10008,.F.);+#10021=ORIENTED_EDGE('',*,*,#3514,.F.);+#10022=CYLINDRICAL_SURFACE('',#10023,0.2);+#10023=AXIS2_PLACEMENT_3D('',#3519,#2936,#2953);+#10024=ADVANCED_FACE('',(#10025),#10030,.F.);+#10025=FACE_BOUND('',#10026,.F.);+#10026=EDGE_LOOP('',(#10027,#3575,#10028,#10029));+#10027=ORIENTED_EDGE('',*,*,#3568,.T.);+#10028=ORIENTED_EDGE('',*,*,#10018,.F.);+#10029=ORIENTED_EDGE('',*,*,#3509,.F.);+#10030=PLANE('',#10031);+#10031=AXIS2_PLACEMENT_3D('',#3504,#9719,#2944);+#10032=ADVANCED_FACE('',(#10033),#10040,.T.);+#10033=FACE_BOUND('',#10034,.F.);+#10034=EDGE_LOOP('',(#10035,#3753,#10038,#10039));+#10035=ORIENTED_EDGE('',*,*,#10036,.T.);+#10036=EDGE_CURVE('',#3683,#3750,#10037,.T.);+#10037=LINE('',#3684,#684);+#10038=ORIENTED_EDGE('',*,*,#9137,.F.);+#10039=ORIENTED_EDGE('',*,*,#3687,.F.);+#10040=CYLINDRICAL_SURFACE('',#10041,0.2);+#10041=AXIS2_PLACEMENT_3D('',#3647,#2936,#2990);+#10042=ADVANCED_FACE('',(#10043),#10050,.F.);+#10043=FACE_BOUND('',#10044,.F.);+#10044=EDGE_LOOP('',(#10045,#3748,#10048,#10049));+#10045=ORIENTED_EDGE('',*,*,#10046,.T.);+#10046=EDGE_CURVE('',#3677,#3744,#10047,.T.);+#10047=LINE('',#3678,#684);+#10048=ORIENTED_EDGE('',*,*,#10036,.F.);+#10049=ORIENTED_EDGE('',*,*,#3682,.F.);+#10050=PLANE('',#10051);+#10051=AXIS2_PLACEMENT_3D('',#3678,#9660,#2983);+#10052=ADVANCED_FACE('',(#10053),#10060,.F.);+#10053=FACE_BOUND('',#10054,.F.);+#10054=EDGE_LOOP('',(#10055,#3742,#10058,#10059));+#10055=ORIENTED_EDGE('',*,*,#10056,.T.);+#10056=EDGE_CURVE('',#3672,#3739,#10057,.T.);+#10057=LINE('',#3673,#684);+#10058=ORIENTED_EDGE('',*,*,#10046,.F.);+#10059=ORIENTED_EDGE('',*,*,#3676,.F.);+#10060=CYLINDRICAL_SURFACE('',#10061,0.1);+#10061=AXIS2_PLACEMENT_3D('',#3659,#2936,#2976);+#10062=ADVANCED_FACE('',(#10063),#10070,.F.);+#10063=FACE_BOUND('',#10064,.F.);+#10064=EDGE_LOOP('',(#10065,#3737,#10068,#10069));+#10065=ORIENTED_EDGE('',*,*,#10066,.T.);+#10066=EDGE_CURVE('',#3667,#3734,#10067,.T.);+#10067=LINE('',#3668,#684);+#10068=ORIENTED_EDGE('',*,*,#10056,.F.);+#10069=ORIENTED_EDGE('',*,*,#3671,.F.);+#10070=PLANE('',#10071);+#10071=AXIS2_PLACEMENT_3D('',#3668,#2450,#623);+#10072=ADVANCED_FACE('',(#10073),#10080,.F.);+#10073=FACE_BOUND('',#10074,.F.);+#10074=EDGE_LOOP('',(#10075,#3732,#10078,#10079));+#10075=ORIENTED_EDGE('',*,*,#10076,.T.);+#10076=EDGE_CURVE('',#3662,#3729,#10077,.T.);+#10077=LINE('',#3663,#684);+#10078=ORIENTED_EDGE('',*,*,#10066,.F.);+#10079=ORIENTED_EDGE('',*,*,#3666,.F.);+#10080=PLANE('',#10081);+#10081=AXIS2_PLACEMENT_3D('',#3663,#623,#13);+#10082=ADVANCED_FACE('',(#10083),#10090,.F.);+#10083=FACE_BOUND('',#10084,.F.);+#10084=EDGE_LOOP('',(#10085,#3727,#10088,#10089));+#10085=ORIENTED_EDGE('',*,*,#10086,.T.);+#10086=EDGE_CURVE('',#3655,#3722,#10087,.T.);+#10087=LINE('',#3656,#684);+#10088=ORIENTED_EDGE('',*,*,#10076,.F.);+#10089=ORIENTED_EDGE('',*,*,#3661,.F.);+#10090=PLANE('',#10091);+#10091=AXIS2_PLACEMENT_3D('',#3656,#13,#673);+#10092=ADVANCED_FACE('',(#10093),#10100,.T.);+#10093=FACE_BOUND('',#10094,.F.);+#10094=EDGE_LOOP('',(#10095,#3720,#10098,#10099));+#10095=ORIENTED_EDGE('',*,*,#10096,.T.);+#10096=EDGE_CURVE('',#3650,#3717,#10097,.T.);+#10097=LINE('',#3651,#684);+#10098=ORIENTED_EDGE('',*,*,#10086,.F.);+#10099=ORIENTED_EDGE('',*,*,#3654,.F.);+#10100=CYLINDRICAL_SURFACE('',#10101,0.2);+#10101=AXIS2_PLACEMENT_3D('',#3659,#2936,#2953);+#10102=ADVANCED_FACE('',(#10103),#10108,.F.);+#10103=FACE_BOUND('',#10104,.F.);+#10104=EDGE_LOOP('',(#10105,#3715,#10106,#10107));+#10105=ORIENTED_EDGE('',*,*,#3708,.T.);+#10106=ORIENTED_EDGE('',*,*,#10096,.F.);+#10107=ORIENTED_EDGE('',*,*,#3649,.F.);+#10108=PLANE('',#10109);+#10109=AXIS2_PLACEMENT_3D('',#3644,#9719,#2944);+#10110=ADVANCED_FACE('',(#10111),#10118,.T.);+#10111=FACE_BOUND('',#10112,.F.);+#10112=EDGE_LOOP('',(#10113,#3893,#10116,#10117));+#10113=ORIENTED_EDGE('',*,*,#10114,.T.);+#10114=EDGE_CURVE('',#3823,#3890,#10115,.T.);+#10115=LINE('',#3824,#684);+#10116=ORIENTED_EDGE('',*,*,#9149,.F.);+#10117=ORIENTED_EDGE('',*,*,#3827,.F.);+#10118=CYLINDRICAL_SURFACE('',#10119,0.2);+#10119=AXIS2_PLACEMENT_3D('',#3787,#2936,#2990);+#10120=ADVANCED_FACE('',(#10121),#10128,.F.);+#10121=FACE_BOUND('',#10122,.F.);+#10122=EDGE_LOOP('',(#10123,#3888,#10126,#10127));+#10123=ORIENTED_EDGE('',*,*,#10124,.T.);+#10124=EDGE_CURVE('',#3817,#3884,#10125,.T.);+#10125=LINE('',#3818,#684);+#10126=ORIENTED_EDGE('',*,*,#10114,.F.);+#10127=ORIENTED_EDGE('',*,*,#3822,.F.);+#10128=PLANE('',#10129);+#10129=AXIS2_PLACEMENT_3D('',#3818,#9660,#2983);+#10130=ADVANCED_FACE('',(#10131),#10138,.F.);+#10131=FACE_BOUND('',#10132,.F.);+#10132=EDGE_LOOP('',(#10133,#3882,#10136,#10137));+#10133=ORIENTED_EDGE('',*,*,#10134,.T.);+#10134=EDGE_CURVE('',#3812,#3879,#10135,.T.);+#10135=LINE('',#3813,#684);+#10136=ORIENTED_EDGE('',*,*,#10124,.F.);+#10137=ORIENTED_EDGE('',*,*,#3816,.F.);+#10138=CYLINDRICAL_SURFACE('',#10139,0.1);+#10139=AXIS2_PLACEMENT_3D('',#3799,#2936,#2976);+#10140=ADVANCED_FACE('',(#10141),#10148,.F.);+#10141=FACE_BOUND('',#10142,.F.);+#10142=EDGE_LOOP('',(#10143,#3877,#10146,#10147));+#10143=ORIENTED_EDGE('',*,*,#10144,.T.);+#10144=EDGE_CURVE('',#3807,#3874,#10145,.T.);+#10145=LINE('',#3808,#684);+#10146=ORIENTED_EDGE('',*,*,#10134,.F.);+#10147=ORIENTED_EDGE('',*,*,#3811,.F.);+#10148=PLANE('',#10149);+#10149=AXIS2_PLACEMENT_3D('',#3808,#2450,#623);+#10150=ADVANCED_FACE('',(#10151),#10158,.F.);+#10151=FACE_BOUND('',#10152,.F.);+#10152=EDGE_LOOP('',(#10153,#3872,#10156,#10157));+#10153=ORIENTED_EDGE('',*,*,#10154,.T.);+#10154=EDGE_CURVE('',#3802,#3869,#10155,.T.);+#10155=LINE('',#3803,#684);+#10156=ORIENTED_EDGE('',*,*,#10144,.F.);+#10157=ORIENTED_EDGE('',*,*,#3806,.F.);+#10158=PLANE('',#10159);+#10159=AXIS2_PLACEMENT_3D('',#3803,#623,#13);+#10160=ADVANCED_FACE('',(#10161),#10168,.F.);+#10161=FACE_BOUND('',#10162,.F.);+#10162=EDGE_LOOP('',(#10163,#3867,#10166,#10167));+#10163=ORIENTED_EDGE('',*,*,#10164,.T.);+#10164=EDGE_CURVE('',#3795,#3862,#10165,.T.);+#10165=LINE('',#3796,#684);+#10166=ORIENTED_EDGE('',*,*,#10154,.F.);+#10167=ORIENTED_EDGE('',*,*,#3801,.F.);+#10168=PLANE('',#10169);+#10169=AXIS2_PLACEMENT_3D('',#3796,#13,#673);+#10170=ADVANCED_FACE('',(#10171),#10178,.T.);+#10171=FACE_BOUND('',#10172,.F.);+#10172=EDGE_LOOP('',(#10173,#3860,#10176,#10177));+#10173=ORIENTED_EDGE('',*,*,#10174,.T.);+#10174=EDGE_CURVE('',#3790,#3857,#10175,.T.);+#10175=LINE('',#3791,#684);+#10176=ORIENTED_EDGE('',*,*,#10164,.F.);+#10177=ORIENTED_EDGE('',*,*,#3794,.F.);+#10178=CYLINDRICAL_SURFACE('',#10179,0.2);+#10179=AXIS2_PLACEMENT_3D('',#3799,#2936,#2953);+#10180=ADVANCED_FACE('',(#10181),#10186,.F.);+#10181=FACE_BOUND('',#10182,.F.);+#10182=EDGE_LOOP('',(#10183,#3855,#10184,#10185));+#10183=ORIENTED_EDGE('',*,*,#3848,.T.);+#10184=ORIENTED_EDGE('',*,*,#10174,.F.);+#10185=ORIENTED_EDGE('',*,*,#3789,.F.);+#10186=PLANE('',#10187);+#10187=AXIS2_PLACEMENT_3D('',#3784,#9719,#2944);+#10188=ADVANCED_FACE('',(#10189),#10196,.T.);+#10189=FACE_BOUND('',#10190,.F.);+#10190=EDGE_LOOP('',(#10191,#4033,#10194,#10195));+#10191=ORIENTED_EDGE('',*,*,#10192,.T.);+#10192=EDGE_CURVE('',#3963,#4030,#10193,.T.);+#10193=LINE('',#3964,#684);+#10194=ORIENTED_EDGE('',*,*,#9161,.F.);+#10195=ORIENTED_EDGE('',*,*,#3967,.F.);+#10196=CYLINDRICAL_SURFACE('',#10197,0.2);+#10197=AXIS2_PLACEMENT_3D('',#3927,#2936,#2990);+#10198=ADVANCED_FACE('',(#10199),#10206,.F.);+#10199=FACE_BOUND('',#10200,.F.);+#10200=EDGE_LOOP('',(#10201,#4028,#10204,#10205));+#10201=ORIENTED_EDGE('',*,*,#10202,.T.);+#10202=EDGE_CURVE('',#3957,#4024,#10203,.T.);+#10203=LINE('',#3958,#684);+#10204=ORIENTED_EDGE('',*,*,#10192,.F.);+#10205=ORIENTED_EDGE('',*,*,#3962,.F.);+#10206=PLANE('',#10207);+#10207=AXIS2_PLACEMENT_3D('',#3958,#9660,#2983);+#10208=ADVANCED_FACE('',(#10209),#10216,.F.);+#10209=FACE_BOUND('',#10210,.F.);+#10210=EDGE_LOOP('',(#10211,#4022,#10214,#10215));+#10211=ORIENTED_EDGE('',*,*,#10212,.T.);+#10212=EDGE_CURVE('',#3952,#4019,#10213,.T.);+#10213=LINE('',#3953,#684);+#10214=ORIENTED_EDGE('',*,*,#10202,.F.);+#10215=ORIENTED_EDGE('',*,*,#3956,.F.);+#10216=CYLINDRICAL_SURFACE('',#10217,0.1);+#10217=AXIS2_PLACEMENT_3D('',#3939,#2936,#2976);+#10218=ADVANCED_FACE('',(#10219),#10226,.F.);+#10219=FACE_BOUND('',#10220,.F.);+#10220=EDGE_LOOP('',(#10221,#4017,#10224,#10225));+#10221=ORIENTED_EDGE('',*,*,#10222,.T.);+#10222=EDGE_CURVE('',#3947,#4014,#10223,.T.);+#10223=LINE('',#3948,#684);+#10224=ORIENTED_EDGE('',*,*,#10212,.F.);+#10225=ORIENTED_EDGE('',*,*,#3951,.F.);+#10226=PLANE('',#10227);+#10227=AXIS2_PLACEMENT_3D('',#3948,#2450,#623);+#10228=ADVANCED_FACE('',(#10229),#10236,.F.);+#10229=FACE_BOUND('',#10230,.F.);+#10230=EDGE_LOOP('',(#10231,#4012,#10234,#10235));+#10231=ORIENTED_EDGE('',*,*,#10232,.T.);+#10232=EDGE_CURVE('',#3942,#4009,#10233,.T.);+#10233=LINE('',#3943,#684);+#10234=ORIENTED_EDGE('',*,*,#10222,.F.);+#10235=ORIENTED_EDGE('',*,*,#3946,.F.);+#10236=PLANE('',#10237);+#10237=AXIS2_PLACEMENT_3D('',#3943,#623,#13);+#10238=ADVANCED_FACE('',(#10239),#10246,.F.);+#10239=FACE_BOUND('',#10240,.F.);+#10240=EDGE_LOOP('',(#10241,#4007,#10244,#10245));+#10241=ORIENTED_EDGE('',*,*,#10242,.T.);+#10242=EDGE_CURVE('',#3935,#4002,#10243,.T.);+#10243=LINE('',#3936,#684);+#10244=ORIENTED_EDGE('',*,*,#10232,.F.);+#10245=ORIENTED_EDGE('',*,*,#3941,.F.);+#10246=PLANE('',#10247);+#10247=AXIS2_PLACEMENT_3D('',#3936,#13,#673);+#10248=ADVANCED_FACE('',(#10249),#10256,.T.);+#10249=FACE_BOUND('',#10250,.F.);+#10250=EDGE_LOOP('',(#10251,#4000,#10254,#10255));+#10251=ORIENTED_EDGE('',*,*,#10252,.T.);+#10252=EDGE_CURVE('',#3930,#3997,#10253,.T.);+#10253=LINE('',#3931,#684);+#10254=ORIENTED_EDGE('',*,*,#10242,.F.);+#10255=ORIENTED_EDGE('',*,*,#3934,.F.);+#10256=CYLINDRICAL_SURFACE('',#10257,0.2);+#10257=AXIS2_PLACEMENT_3D('',#3939,#2936,#2953);+#10258=ADVANCED_FACE('',(#10259),#10264,.F.);+#10259=FACE_BOUND('',#10260,.F.);+#10260=EDGE_LOOP('',(#10261,#3995,#10262,#10263));+#10261=ORIENTED_EDGE('',*,*,#3988,.T.);+#10262=ORIENTED_EDGE('',*,*,#10252,.F.);+#10263=ORIENTED_EDGE('',*,*,#3929,.F.);+#10264=PLANE('',#10265);+#10265=AXIS2_PLACEMENT_3D('',#3924,#9719,#2944);+#10266=ADVANCED_FACE('',(#10267),#10274,.T.);+#10267=FACE_BOUND('',#10268,.F.);+#10268=EDGE_LOOP('',(#10269,#4173,#10272,#10273));+#10269=ORIENTED_EDGE('',*,*,#10270,.T.);+#10270=EDGE_CURVE('',#4103,#4170,#10271,.T.);+#10271=LINE('',#4104,#684);+#10272=ORIENTED_EDGE('',*,*,#9173,.F.);+#10273=ORIENTED_EDGE('',*,*,#4107,.F.);+#10274=CYLINDRICAL_SURFACE('',#10275,0.2);+#10275=AXIS2_PLACEMENT_3D('',#4067,#2936,#2990);+#10276=ADVANCED_FACE('',(#10277),#10284,.F.);+#10277=FACE_BOUND('',#10278,.F.);+#10278=EDGE_LOOP('',(#10279,#4168,#10282,#10283));+#10279=ORIENTED_EDGE('',*,*,#10280,.T.);+#10280=EDGE_CURVE('',#4097,#4164,#10281,.T.);+#10281=LINE('',#4098,#684);+#10282=ORIENTED_EDGE('',*,*,#10270,.F.);+#10283=ORIENTED_EDGE('',*,*,#4102,.F.);+#10284=PLANE('',#10285);+#10285=AXIS2_PLACEMENT_3D('',#4098,#9660,#2983);+#10286=ADVANCED_FACE('',(#10287),#10294,.F.);+#10287=FACE_BOUND('',#10288,.F.);+#10288=EDGE_LOOP('',(#10289,#4162,#10292,#10293));+#10289=ORIENTED_EDGE('',*,*,#10290,.T.);+#10290=EDGE_CURVE('',#4092,#4159,#10291,.T.);+#10291=LINE('',#4093,#684);+#10292=ORIENTED_EDGE('',*,*,#10280,.F.);+#10293=ORIENTED_EDGE('',*,*,#4096,.F.);+#10294=CYLINDRICAL_SURFACE('',#10295,0.1);+#10295=AXIS2_PLACEMENT_3D('',#4079,#2936,#2976);+#10296=ADVANCED_FACE('',(#10297),#10304,.F.);+#10297=FACE_BOUND('',#10298,.F.);+#10298=EDGE_LOOP('',(#10299,#4157,#10302,#10303));+#10299=ORIENTED_EDGE('',*,*,#10300,.T.);+#10300=EDGE_CURVE('',#4087,#4154,#10301,.T.);+#10301=LINE('',#4088,#684);+#10302=ORIENTED_EDGE('',*,*,#10290,.F.);+#10303=ORIENTED_EDGE('',*,*,#4091,.F.);+#10304=PLANE('',#10305);+#10305=AXIS2_PLACEMENT_3D('',#4088,#2450,#623);+#10306=ADVANCED_FACE('',(#10307),#10314,.F.);+#10307=FACE_BOUND('',#10308,.F.);+#10308=EDGE_LOOP('',(#10309,#4152,#10312,#10313));+#10309=ORIENTED_EDGE('',*,*,#10310,.T.);+#10310=EDGE_CURVE('',#4082,#4149,#10311,.T.);+#10311=LINE('',#4083,#684);+#10312=ORIENTED_EDGE('',*,*,#10300,.F.);+#10313=ORIENTED_EDGE('',*,*,#4086,.F.);+#10314=PLANE('',#10315);+#10315=AXIS2_PLACEMENT_3D('',#4083,#623,#13);+#10316=ADVANCED_FACE('',(#10317),#10324,.F.);+#10317=FACE_BOUND('',#10318,.F.);+#10318=EDGE_LOOP('',(#10319,#4147,#10322,#10323));+#10319=ORIENTED_EDGE('',*,*,#10320,.T.);+#10320=EDGE_CURVE('',#4075,#4142,#10321,.T.);+#10321=LINE('',#4076,#684);+#10322=ORIENTED_EDGE('',*,*,#10310,.F.);+#10323=ORIENTED_EDGE('',*,*,#4081,.F.);+#10324=PLANE('',#10325);+#10325=AXIS2_PLACEMENT_3D('',#4076,#13,#673);+#10326=ADVANCED_FACE('',(#10327),#10334,.T.);+#10327=FACE_BOUND('',#10328,.F.);+#10328=EDGE_LOOP('',(#10329,#4140,#10332,#10333));+#10329=ORIENTED_EDGE('',*,*,#10330,.T.);+#10330=EDGE_CURVE('',#4070,#4137,#10331,.T.);+#10331=LINE('',#4071,#684);+#10332=ORIENTED_EDGE('',*,*,#10320,.F.);+#10333=ORIENTED_EDGE('',*,*,#4074,.F.);+#10334=CYLINDRICAL_SURFACE('',#10335,0.2);+#10335=AXIS2_PLACEMENT_3D('',#4079,#2936,#2953);+#10336=ADVANCED_FACE('',(#10337),#10342,.F.);+#10337=FACE_BOUND('',#10338,.F.);+#10338=EDGE_LOOP('',(#10339,#4135,#10340,#10341));+#10339=ORIENTED_EDGE('',*,*,#4128,.T.);+#10340=ORIENTED_EDGE('',*,*,#10330,.F.);+#10341=ORIENTED_EDGE('',*,*,#4069,.F.);+#10342=PLANE('',#10343);+#10343=AXIS2_PLACEMENT_3D('',#4064,#9719,#2944);+#10344=ADVANCED_FACE('',(#10345),#10352,.T.);+#10345=FACE_BOUND('',#10346,.F.);+#10346=EDGE_LOOP('',(#10347,#4313,#10350,#10351));+#10347=ORIENTED_EDGE('',*,*,#10348,.T.);+#10348=EDGE_CURVE('',#4243,#4310,#10349,.T.);+#10349=LINE('',#4244,#684);+#10350=ORIENTED_EDGE('',*,*,#9185,.F.);+#10351=ORIENTED_EDGE('',*,*,#4247,.F.);+#10352=CYLINDRICAL_SURFACE('',#10353,0.2);+#10353=AXIS2_PLACEMENT_3D('',#4207,#2936,#2990);+#10354=ADVANCED_FACE('',(#10355),#10362,.F.);+#10355=FACE_BOUND('',#10356,.F.);+#10356=EDGE_LOOP('',(#10357,#4308,#10360,#10361));+#10357=ORIENTED_EDGE('',*,*,#10358,.T.);+#10358=EDGE_CURVE('',#4237,#4304,#10359,.T.);+#10359=LINE('',#4238,#684);+#10360=ORIENTED_EDGE('',*,*,#10348,.F.);+#10361=ORIENTED_EDGE('',*,*,#4242,.F.);+#10362=PLANE('',#10363);+#10363=AXIS2_PLACEMENT_3D('',#4238,#9660,#2983);+#10364=ADVANCED_FACE('',(#10365),#10372,.F.);+#10365=FACE_BOUND('',#10366,.F.);+#10366=EDGE_LOOP('',(#10367,#4302,#10370,#10371));+#10367=ORIENTED_EDGE('',*,*,#10368,.T.);+#10368=EDGE_CURVE('',#4232,#4299,#10369,.T.);+#10369=LINE('',#4233,#684);+#10370=ORIENTED_EDGE('',*,*,#10358,.F.);+#10371=ORIENTED_EDGE('',*,*,#4236,.F.);+#10372=CYLINDRICAL_SURFACE('',#10373,0.1);+#10373=AXIS2_PLACEMENT_3D('',#4219,#2936,#2976);+#10374=ADVANCED_FACE('',(#10375),#10382,.F.);+#10375=FACE_BOUND('',#10376,.F.);+#10376=EDGE_LOOP('',(#10377,#4297,#10380,#10381));+#10377=ORIENTED_EDGE('',*,*,#10378,.T.);+#10378=EDGE_CURVE('',#4227,#4294,#10379,.T.);+#10379=LINE('',#4228,#684);+#10380=ORIENTED_EDGE('',*,*,#10368,.F.);+#10381=ORIENTED_EDGE('',*,*,#4231,.F.);+#10382=PLANE('',#10383);+#10383=AXIS2_PLACEMENT_3D('',#4228,#2450,#623);+#10384=ADVANCED_FACE('',(#10385),#10392,.F.);+#10385=FACE_BOUND('',#10386,.F.);+#10386=EDGE_LOOP('',(#10387,#4292,#10390,#10391));+#10387=ORIENTED_EDGE('',*,*,#10388,.T.);+#10388=EDGE_CURVE('',#4222,#4289,#10389,.T.);+#10389=LINE('',#4223,#684);+#10390=ORIENTED_EDGE('',*,*,#10378,.F.);+#10391=ORIENTED_EDGE('',*,*,#4226,.F.);+#10392=PLANE('',#10393);+#10393=AXIS2_PLACEMENT_3D('',#4223,#623,#13);+#10394=ADVANCED_FACE('',(#10395),#10402,.F.);+#10395=FACE_BOUND('',#10396,.F.);+#10396=EDGE_LOOP('',(#10397,#4287,#10400,#10401));+#10397=ORIENTED_EDGE('',*,*,#10398,.T.);+#10398=EDGE_CURVE('',#4215,#4282,#10399,.T.);+#10399=LINE('',#4216,#684);+#10400=ORIENTED_EDGE('',*,*,#10388,.F.);+#10401=ORIENTED_EDGE('',*,*,#4221,.F.);+#10402=PLANE('',#10403);+#10403=AXIS2_PLACEMENT_3D('',#4216,#13,#673);+#10404=ADVANCED_FACE('',(#10405),#10412,.T.);+#10405=FACE_BOUND('',#10406,.F.);+#10406=EDGE_LOOP('',(#10407,#4280,#10410,#10411));+#10407=ORIENTED_EDGE('',*,*,#10408,.T.);+#10408=EDGE_CURVE('',#4210,#4277,#10409,.T.);+#10409=LINE('',#4211,#684);+#10410=ORIENTED_EDGE('',*,*,#10398,.F.);+#10411=ORIENTED_EDGE('',*,*,#4214,.F.);+#10412=CYLINDRICAL_SURFACE('',#10413,0.2);+#10413=AXIS2_PLACEMENT_3D('',#4219,#2936,#2953);+#10414=ADVANCED_FACE('',(#10415),#10420,.F.);+#10415=FACE_BOUND('',#10416,.F.);+#10416=EDGE_LOOP('',(#10417,#4275,#10418,#10419));+#10417=ORIENTED_EDGE('',*,*,#4268,.T.);+#10418=ORIENTED_EDGE('',*,*,#10408,.F.);+#10419=ORIENTED_EDGE('',*,*,#4209,.F.);+#10420=PLANE('',#10421);+#10421=AXIS2_PLACEMENT_3D('',#4204,#9719,#2944);+#10422=ADVANCED_FACE('',(#10423),#10430,.T.);+#10423=FACE_BOUND('',#10424,.F.);+#10424=EDGE_LOOP('',(#10425,#4453,#10428,#10429));+#10425=ORIENTED_EDGE('',*,*,#10426,.T.);+#10426=EDGE_CURVE('',#4383,#4450,#10427,.T.);+#10427=LINE('',#4384,#684);+#10428=ORIENTED_EDGE('',*,*,#9197,.F.);+#10429=ORIENTED_EDGE('',*,*,#4387,.F.);+#10430=CYLINDRICAL_SURFACE('',#10431,0.2);+#10431=AXIS2_PLACEMENT_3D('',#4347,#2936,#2990);+#10432=ADVANCED_FACE('',(#10433),#10440,.F.);+#10433=FACE_BOUND('',#10434,.F.);+#10434=EDGE_LOOP('',(#10435,#4448,#10438,#10439));+#10435=ORIENTED_EDGE('',*,*,#10436,.T.);+#10436=EDGE_CURVE('',#4377,#4444,#10437,.T.);+#10437=LINE('',#4378,#684);+#10438=ORIENTED_EDGE('',*,*,#10426,.F.);+#10439=ORIENTED_EDGE('',*,*,#4382,.F.);+#10440=PLANE('',#10441);+#10441=AXIS2_PLACEMENT_3D('',#4378,#9660,#2983);+#10442=ADVANCED_FACE('',(#10443),#10450,.F.);+#10443=FACE_BOUND('',#10444,.F.);+#10444=EDGE_LOOP('',(#10445,#4442,#10448,#10449));+#10445=ORIENTED_EDGE('',*,*,#10446,.T.);+#10446=EDGE_CURVE('',#4372,#4439,#10447,.T.);+#10447=LINE('',#4373,#684);+#10448=ORIENTED_EDGE('',*,*,#10436,.F.);+#10449=ORIENTED_EDGE('',*,*,#4376,.F.);+#10450=CYLINDRICAL_SURFACE('',#10451,0.1);+#10451=AXIS2_PLACEMENT_3D('',#4359,#2936,#2976);+#10452=ADVANCED_FACE('',(#10453),#10460,.F.);+#10453=FACE_BOUND('',#10454,.F.);+#10454=EDGE_LOOP('',(#10455,#4437,#10458,#10459));+#10455=ORIENTED_EDGE('',*,*,#10456,.T.);+#10456=EDGE_CURVE('',#4367,#4434,#10457,.T.);+#10457=LINE('',#4368,#684);+#10458=ORIENTED_EDGE('',*,*,#10446,.F.);+#10459=ORIENTED_EDGE('',*,*,#4371,.F.);+#10460=PLANE('',#10461);+#10461=AXIS2_PLACEMENT_3D('',#4368,#2450,#623);+#10462=ADVANCED_FACE('',(#10463),#10470,.F.);+#10463=FACE_BOUND('',#10464,.F.);+#10464=EDGE_LOOP('',(#10465,#4432,#10468,#10469));+#10465=ORIENTED_EDGE('',*,*,#10466,.T.);+#10466=EDGE_CURVE('',#4362,#4429,#10467,.T.);+#10467=LINE('',#4363,#684);+#10468=ORIENTED_EDGE('',*,*,#10456,.F.);+#10469=ORIENTED_EDGE('',*,*,#4366,.F.);+#10470=PLANE('',#10471);+#10471=AXIS2_PLACEMENT_3D('',#4363,#623,#13);+#10472=ADVANCED_FACE('',(#10473),#10480,.F.);+#10473=FACE_BOUND('',#10474,.F.);+#10474=EDGE_LOOP('',(#10475,#4427,#10478,#10479));+#10475=ORIENTED_EDGE('',*,*,#10476,.T.);+#10476=EDGE_CURVE('',#4355,#4422,#10477,.T.);+#10477=LINE('',#4356,#684);+#10478=ORIENTED_EDGE('',*,*,#10466,.F.);+#10479=ORIENTED_EDGE('',*,*,#4361,.F.);+#10480=PLANE('',#10481);+#10481=AXIS2_PLACEMENT_3D('',#4356,#13,#673);+#10482=ADVANCED_FACE('',(#10483),#10490,.T.);+#10483=FACE_BOUND('',#10484,.F.);+#10484=EDGE_LOOP('',(#10485,#4420,#10488,#10489));+#10485=ORIENTED_EDGE('',*,*,#10486,.T.);+#10486=EDGE_CURVE('',#4350,#4417,#10487,.T.);+#10487=LINE('',#4351,#684);+#10488=ORIENTED_EDGE('',*,*,#10476,.F.);+#10489=ORIENTED_EDGE('',*,*,#4354,.F.);+#10490=CYLINDRICAL_SURFACE('',#10491,0.2);+#10491=AXIS2_PLACEMENT_3D('',#4359,#2936,#2953);+#10492=ADVANCED_FACE('',(#10493),#10498,.F.);+#10493=FACE_BOUND('',#10494,.F.);+#10494=EDGE_LOOP('',(#10495,#4415,#10496,#10497));+#10495=ORIENTED_EDGE('',*,*,#4408,.T.);+#10496=ORIENTED_EDGE('',*,*,#10486,.F.);+#10497=ORIENTED_EDGE('',*,*,#4349,.F.);+#10498=PLANE('',#10499);+#10499=AXIS2_PLACEMENT_3D('',#4344,#9719,#2944);+#10500=ADVANCED_FACE('',(#10501),#10508,.T.);+#10501=FACE_BOUND('',#10502,.F.);+#10502=EDGE_LOOP('',(#10503,#4593,#10506,#10507));+#10503=ORIENTED_EDGE('',*,*,#10504,.T.);+#10504=EDGE_CURVE('',#4523,#4590,#10505,.T.);+#10505=LINE('',#4524,#684);+#10506=ORIENTED_EDGE('',*,*,#9209,.F.);+#10507=ORIENTED_EDGE('',*,*,#4527,.F.);+#10508=CYLINDRICAL_SURFACE('',#10509,0.2);+#10509=AXIS2_PLACEMENT_3D('',#4487,#2936,#2990);+#10510=ADVANCED_FACE('',(#10511),#10518,.F.);+#10511=FACE_BOUND('',#10512,.F.);+#10512=EDGE_LOOP('',(#10513,#4588,#10516,#10517));+#10513=ORIENTED_EDGE('',*,*,#10514,.T.);+#10514=EDGE_CURVE('',#4517,#4584,#10515,.T.);+#10515=LINE('',#4518,#684);+#10516=ORIENTED_EDGE('',*,*,#10504,.F.);+#10517=ORIENTED_EDGE('',*,*,#4522,.F.);+#10518=PLANE('',#10519);+#10519=AXIS2_PLACEMENT_3D('',#4518,#9660,#2983);+#10520=ADVANCED_FACE('',(#10521),#10528,.F.);+#10521=FACE_BOUND('',#10522,.F.);+#10522=EDGE_LOOP('',(#10523,#4582,#10526,#10527));+#10523=ORIENTED_EDGE('',*,*,#10524,.T.);+#10524=EDGE_CURVE('',#4512,#4579,#10525,.T.);+#10525=LINE('',#4513,#684);+#10526=ORIENTED_EDGE('',*,*,#10514,.F.);+#10527=ORIENTED_EDGE('',*,*,#4516,.F.);+#10528=CYLINDRICAL_SURFACE('',#10529,0.1);+#10529=AXIS2_PLACEMENT_3D('',#4499,#2936,#2976);+#10530=ADVANCED_FACE('',(#10531),#10538,.F.);+#10531=FACE_BOUND('',#10532,.F.);+#10532=EDGE_LOOP('',(#10533,#4577,#10536,#10537));+#10533=ORIENTED_EDGE('',*,*,#10534,.T.);+#10534=EDGE_CURVE('',#4507,#4574,#10535,.T.);+#10535=LINE('',#4508,#684);+#10536=ORIENTED_EDGE('',*,*,#10524,.F.);+#10537=ORIENTED_EDGE('',*,*,#4511,.F.);+#10538=PLANE('',#10539);+#10539=AXIS2_PLACEMENT_3D('',#4508,#2450,#623);+#10540=ADVANCED_FACE('',(#10541),#10548,.F.);+#10541=FACE_BOUND('',#10542,.F.);+#10542=EDGE_LOOP('',(#10543,#4572,#10546,#10547));+#10543=ORIENTED_EDGE('',*,*,#10544,.T.);+#10544=EDGE_CURVE('',#4502,#4569,#10545,.T.);+#10545=LINE('',#4503,#684);+#10546=ORIENTED_EDGE('',*,*,#10534,.F.);+#10547=ORIENTED_EDGE('',*,*,#4506,.F.);+#10548=PLANE('',#10549);+#10549=AXIS2_PLACEMENT_3D('',#4503,#623,#13);+#10550=ADVANCED_FACE('',(#10551),#10558,.F.);+#10551=FACE_BOUND('',#10552,.F.);+#10552=EDGE_LOOP('',(#10553,#4567,#10556,#10557));+#10553=ORIENTED_EDGE('',*,*,#10554,.T.);+#10554=EDGE_CURVE('',#4495,#4562,#10555,.T.);+#10555=LINE('',#4496,#684);+#10556=ORIENTED_EDGE('',*,*,#10544,.F.);+#10557=ORIENTED_EDGE('',*,*,#4501,.F.);+#10558=PLANE('',#10559);+#10559=AXIS2_PLACEMENT_3D('',#4496,#13,#673);+#10560=ADVANCED_FACE('',(#10561),#10568,.T.);+#10561=FACE_BOUND('',#10562,.F.);+#10562=EDGE_LOOP('',(#10563,#4560,#10566,#10567));+#10563=ORIENTED_EDGE('',*,*,#10564,.T.);+#10564=EDGE_CURVE('',#4490,#4557,#10565,.T.);+#10565=LINE('',#4491,#684);+#10566=ORIENTED_EDGE('',*,*,#10554,.F.);+#10567=ORIENTED_EDGE('',*,*,#4494,.F.);+#10568=CYLINDRICAL_SURFACE('',#10569,0.2);+#10569=AXIS2_PLACEMENT_3D('',#4499,#2936,#2953);+#10570=ADVANCED_FACE('',(#10571),#10576,.F.);+#10571=FACE_BOUND('',#10572,.F.);+#10572=EDGE_LOOP('',(#10573,#4555,#10574,#10575));+#10573=ORIENTED_EDGE('',*,*,#4548,.T.);+#10574=ORIENTED_EDGE('',*,*,#10564,.F.);+#10575=ORIENTED_EDGE('',*,*,#4489,.F.);+#10576=PLANE('',#10577);+#10577=AXIS2_PLACEMENT_3D('',#4484,#9719,#2944);+#10578=ADVANCED_FACE('',(#10579),#10586,.T.);+#10579=FACE_BOUND('',#10580,.F.);+#10580=EDGE_LOOP('',(#10581,#4733,#10584,#10585));+#10581=ORIENTED_EDGE('',*,*,#10582,.T.);+#10582=EDGE_CURVE('',#4663,#4730,#10583,.T.);+#10583=LINE('',#4664,#684);+#10584=ORIENTED_EDGE('',*,*,#9221,.F.);+#10585=ORIENTED_EDGE('',*,*,#4667,.F.);+#10586=CYLINDRICAL_SURFACE('',#10587,0.2);+#10587=AXIS2_PLACEMENT_3D('',#4627,#2936,#2990);+#10588=ADVANCED_FACE('',(#10589),#10596,.F.);+#10589=FACE_BOUND('',#10590,.F.);+#10590=EDGE_LOOP('',(#10591,#4728,#10594,#10595));+#10591=ORIENTED_EDGE('',*,*,#10592,.T.);+#10592=EDGE_CURVE('',#4657,#4724,#10593,.T.);+#10593=LINE('',#4658,#684);+#10594=ORIENTED_EDGE('',*,*,#10582,.F.);+#10595=ORIENTED_EDGE('',*,*,#4662,.F.);+#10596=PLANE('',#10597);+#10597=AXIS2_PLACEMENT_3D('',#4658,#9660,#2983);+#10598=ADVANCED_FACE('',(#10599),#10606,.F.);+#10599=FACE_BOUND('',#10600,.F.);+#10600=EDGE_LOOP('',(#10601,#4722,#10604,#10605));+#10601=ORIENTED_EDGE('',*,*,#10602,.T.);+#10602=EDGE_CURVE('',#4652,#4719,#10603,.T.);+#10603=LINE('',#4653,#684);+#10604=ORIENTED_EDGE('',*,*,#10592,.F.);+#10605=ORIENTED_EDGE('',*,*,#4656,.F.);+#10606=CYLINDRICAL_SURFACE('',#10607,0.1);+#10607=AXIS2_PLACEMENT_3D('',#4639,#2936,#2976);+#10608=ADVANCED_FACE('',(#10609),#10616,.F.);+#10609=FACE_BOUND('',#10610,.F.);+#10610=EDGE_LOOP('',(#10611,#4717,#10614,#10615));+#10611=ORIENTED_EDGE('',*,*,#10612,.T.);+#10612=EDGE_CURVE('',#4647,#4714,#10613,.T.);+#10613=LINE('',#4648,#684);+#10614=ORIENTED_EDGE('',*,*,#10602,.F.);+#10615=ORIENTED_EDGE('',*,*,#4651,.F.);+#10616=PLANE('',#10617);+#10617=AXIS2_PLACEMENT_3D('',#4648,#2450,#623);+#10618=ADVANCED_FACE('',(#10619),#10626,.F.);+#10619=FACE_BOUND('',#10620,.F.);+#10620=EDGE_LOOP('',(#10621,#4712,#10624,#10625));+#10621=ORIENTED_EDGE('',*,*,#10622,.T.);+#10622=EDGE_CURVE('',#4642,#4709,#10623,.T.);+#10623=LINE('',#4643,#684);+#10624=ORIENTED_EDGE('',*,*,#10612,.F.);+#10625=ORIENTED_EDGE('',*,*,#4646,.F.);+#10626=PLANE('',#10627);+#10627=AXIS2_PLACEMENT_3D('',#4643,#623,#13);+#10628=ADVANCED_FACE('',(#10629),#10636,.F.);+#10629=FACE_BOUND('',#10630,.F.);+#10630=EDGE_LOOP('',(#10631,#4707,#10634,#10635));+#10631=ORIENTED_EDGE('',*,*,#10632,.T.);+#10632=EDGE_CURVE('',#4635,#4702,#10633,.T.);+#10633=LINE('',#4636,#684);+#10634=ORIENTED_EDGE('',*,*,#10622,.F.);+#10635=ORIENTED_EDGE('',*,*,#4641,.F.);+#10636=PLANE('',#10637);+#10637=AXIS2_PLACEMENT_3D('',#4636,#13,#673);+#10638=ADVANCED_FACE('',(#10639),#10646,.T.);+#10639=FACE_BOUND('',#10640,.F.);+#10640=EDGE_LOOP('',(#10641,#4700,#10644,#10645));+#10641=ORIENTED_EDGE('',*,*,#10642,.T.);+#10642=EDGE_CURVE('',#4630,#4697,#10643,.T.);+#10643=LINE('',#4631,#684);+#10644=ORIENTED_EDGE('',*,*,#10632,.F.);+#10645=ORIENTED_EDGE('',*,*,#4634,.F.);+#10646=CYLINDRICAL_SURFACE('',#10647,0.2);+#10647=AXIS2_PLACEMENT_3D('',#4639,#2936,#2953);+#10648=ADVANCED_FACE('',(#10649),#10654,.F.);+#10649=FACE_BOUND('',#10650,.F.);+#10650=EDGE_LOOP('',(#10651,#4695,#10652,#10653));+#10651=ORIENTED_EDGE('',*,*,#4688,.T.);+#10652=ORIENTED_EDGE('',*,*,#10642,.F.);+#10653=ORIENTED_EDGE('',*,*,#4629,.F.);+#10654=PLANE('',#10655);+#10655=AXIS2_PLACEMENT_3D('',#4624,#9719,#2944);+#10656=ADVANCED_FACE('',(#10657),#10664,.T.);+#10657=FACE_BOUND('',#10658,.F.);+#10658=EDGE_LOOP('',(#10659,#4873,#10662,#10663));+#10659=ORIENTED_EDGE('',*,*,#10660,.T.);+#10660=EDGE_CURVE('',#4803,#4870,#10661,.T.);+#10661=LINE('',#4804,#684);+#10662=ORIENTED_EDGE('',*,*,#9233,.F.);+#10663=ORIENTED_EDGE('',*,*,#4807,.F.);+#10664=CYLINDRICAL_SURFACE('',#10665,0.2);+#10665=AXIS2_PLACEMENT_3D('',#4767,#2936,#2990);+#10666=ADVANCED_FACE('',(#10667),#10674,.F.);+#10667=FACE_BOUND('',#10668,.F.);+#10668=EDGE_LOOP('',(#10669,#4868,#10672,#10673));+#10669=ORIENTED_EDGE('',*,*,#10670,.T.);+#10670=EDGE_CURVE('',#4797,#4864,#10671,.T.);+#10671=LINE('',#4798,#684);+#10672=ORIENTED_EDGE('',*,*,#10660,.F.);+#10673=ORIENTED_EDGE('',*,*,#4802,.F.);+#10674=PLANE('',#10675);+#10675=AXIS2_PLACEMENT_3D('',#4798,#9660,#2983);+#10676=ADVANCED_FACE('',(#10677),#10684,.F.);+#10677=FACE_BOUND('',#10678,.F.);+#10678=EDGE_LOOP('',(#10679,#4862,#10682,#10683));+#10679=ORIENTED_EDGE('',*,*,#10680,.T.);+#10680=EDGE_CURVE('',#4792,#4859,#10681,.T.);+#10681=LINE('',#4793,#684);+#10682=ORIENTED_EDGE('',*,*,#10670,.F.);+#10683=ORIENTED_EDGE('',*,*,#4796,.F.);+#10684=CYLINDRICAL_SURFACE('',#10685,0.1);+#10685=AXIS2_PLACEMENT_3D('',#4779,#2936,#2976);+#10686=ADVANCED_FACE('',(#10687),#10694,.F.);+#10687=FACE_BOUND('',#10688,.F.);+#10688=EDGE_LOOP('',(#10689,#4857,#10692,#10693));+#10689=ORIENTED_EDGE('',*,*,#10690,.T.);+#10690=EDGE_CURVE('',#4787,#4854,#10691,.T.);+#10691=LINE('',#4788,#684);+#10692=ORIENTED_EDGE('',*,*,#10680,.F.);+#10693=ORIENTED_EDGE('',*,*,#4791,.F.);+#10694=PLANE('',#10695);+#10695=AXIS2_PLACEMENT_3D('',#4788,#2450,#623);+#10696=ADVANCED_FACE('',(#10697),#10704,.F.);+#10697=FACE_BOUND('',#10698,.F.);+#10698=EDGE_LOOP('',(#10699,#4852,#10702,#10703));+#10699=ORIENTED_EDGE('',*,*,#10700,.T.);+#10700=EDGE_CURVE('',#4782,#4849,#10701,.T.);+#10701=LINE('',#4783,#684);+#10702=ORIENTED_EDGE('',*,*,#10690,.F.);+#10703=ORIENTED_EDGE('',*,*,#4786,.F.);+#10704=PLANE('',#10705);+#10705=AXIS2_PLACEMENT_3D('',#4783,#623,#13);+#10706=ADVANCED_FACE('',(#10707),#10714,.F.);+#10707=FACE_BOUND('',#10708,.F.);+#10708=EDGE_LOOP('',(#10709,#4847,#10712,#10713));+#10709=ORIENTED_EDGE('',*,*,#10710,.T.);+#10710=EDGE_CURVE('',#4775,#4842,#10711,.T.);+#10711=LINE('',#4776,#684);+#10712=ORIENTED_EDGE('',*,*,#10700,.F.);+#10713=ORIENTED_EDGE('',*,*,#4781,.F.);+#10714=PLANE('',#10715);+#10715=AXIS2_PLACEMENT_3D('',#4776,#13,#673);+#10716=ADVANCED_FACE('',(#10717),#10724,.T.);+#10717=FACE_BOUND('',#10718,.F.);+#10718=EDGE_LOOP('',(#10719,#4840,#10722,#10723));+#10719=ORIENTED_EDGE('',*,*,#10720,.T.);+#10720=EDGE_CURVE('',#4770,#4837,#10721,.T.);+#10721=LINE('',#4771,#684);+#10722=ORIENTED_EDGE('',*,*,#10710,.F.);+#10723=ORIENTED_EDGE('',*,*,#4774,.F.);+#10724=CYLINDRICAL_SURFACE('',#10725,0.2);+#10725=AXIS2_PLACEMENT_3D('',#4779,#2936,#2953);+#10726=ADVANCED_FACE('',(#10727),#10732,.F.);+#10727=FACE_BOUND('',#10728,.F.);+#10728=EDGE_LOOP('',(#10729,#4835,#10730,#10731));+#10729=ORIENTED_EDGE('',*,*,#4828,.T.);+#10730=ORIENTED_EDGE('',*,*,#10720,.F.);+#10731=ORIENTED_EDGE('',*,*,#4769,.F.);+#10732=PLANE('',#10733);+#10733=AXIS2_PLACEMENT_3D('',#4764,#9719,#2944);+#10734=ADVANCED_FACE('',(#10735),#10742,.T.);+#10735=FACE_BOUND('',#10736,.F.);+#10736=EDGE_LOOP('',(#10737,#5013,#10740,#10741));+#10737=ORIENTED_EDGE('',*,*,#10738,.T.);+#10738=EDGE_CURVE('',#4943,#5010,#10739,.T.);+#10739=LINE('',#4944,#684);+#10740=ORIENTED_EDGE('',*,*,#9245,.F.);+#10741=ORIENTED_EDGE('',*,*,#4947,.F.);+#10742=CYLINDRICAL_SURFACE('',#10743,0.2);+#10743=AXIS2_PLACEMENT_3D('',#4907,#2936,#2990);+#10744=ADVANCED_FACE('',(#10745),#10752,.F.);+#10745=FACE_BOUND('',#10746,.F.);+#10746=EDGE_LOOP('',(#10747,#5008,#10750,#10751));+#10747=ORIENTED_EDGE('',*,*,#10748,.T.);+#10748=EDGE_CURVE('',#4937,#5004,#10749,.T.);+#10749=LINE('',#4938,#684);+#10750=ORIENTED_EDGE('',*,*,#10738,.F.);+#10751=ORIENTED_EDGE('',*,*,#4942,.F.);+#10752=PLANE('',#10753);+#10753=AXIS2_PLACEMENT_3D('',#4938,#9660,#2983);+#10754=ADVANCED_FACE('',(#10755),#10762,.F.);+#10755=FACE_BOUND('',#10756,.F.);+#10756=EDGE_LOOP('',(#10757,#5002,#10760,#10761));+#10757=ORIENTED_EDGE('',*,*,#10758,.T.);+#10758=EDGE_CURVE('',#4932,#4999,#10759,.T.);+#10759=LINE('',#4933,#684);+#10760=ORIENTED_EDGE('',*,*,#10748,.F.);+#10761=ORIENTED_EDGE('',*,*,#4936,.F.);+#10762=CYLINDRICAL_SURFACE('',#10763,0.1);+#10763=AXIS2_PLACEMENT_3D('',#4919,#2936,#2976);+#10764=ADVANCED_FACE('',(#10765),#10772,.F.);+#10765=FACE_BOUND('',#10766,.F.);+#10766=EDGE_LOOP('',(#10767,#4997,#10770,#10771));+#10767=ORIENTED_EDGE('',*,*,#10768,.T.);+#10768=EDGE_CURVE('',#4927,#4994,#10769,.T.);+#10769=LINE('',#4928,#684);+#10770=ORIENTED_EDGE('',*,*,#10758,.F.);+#10771=ORIENTED_EDGE('',*,*,#4931,.F.);+#10772=PLANE('',#10773);+#10773=AXIS2_PLACEMENT_3D('',#4928,#2450,#623);+#10774=ADVANCED_FACE('',(#10775),#10782,.F.);+#10775=FACE_BOUND('',#10776,.F.);+#10776=EDGE_LOOP('',(#10777,#4992,#10780,#10781));+#10777=ORIENTED_EDGE('',*,*,#10778,.T.);+#10778=EDGE_CURVE('',#4922,#4989,#10779,.T.);+#10779=LINE('',#4923,#684);+#10780=ORIENTED_EDGE('',*,*,#10768,.F.);+#10781=ORIENTED_EDGE('',*,*,#4926,.F.);+#10782=PLANE('',#10783);+#10783=AXIS2_PLACEMENT_3D('',#4923,#623,#13);+#10784=ADVANCED_FACE('',(#10785),#10792,.F.);+#10785=FACE_BOUND('',#10786,.F.);+#10786=EDGE_LOOP('',(#10787,#4987,#10790,#10791));+#10787=ORIENTED_EDGE('',*,*,#10788,.T.);+#10788=EDGE_CURVE('',#4915,#4982,#10789,.T.);+#10789=LINE('',#4916,#684);+#10790=ORIENTED_EDGE('',*,*,#10778,.F.);+#10791=ORIENTED_EDGE('',*,*,#4921,.F.);+#10792=PLANE('',#10793);+#10793=AXIS2_PLACEMENT_3D('',#4916,#13,#673);+#10794=ADVANCED_FACE('',(#10795),#10802,.T.);+#10795=FACE_BOUND('',#10796,.F.);+#10796=EDGE_LOOP('',(#10797,#4980,#10800,#10801));+#10797=ORIENTED_EDGE('',*,*,#10798,.T.);+#10798=EDGE_CURVE('',#4910,#4977,#10799,.T.);+#10799=LINE('',#4911,#684);+#10800=ORIENTED_EDGE('',*,*,#10788,.F.);+#10801=ORIENTED_EDGE('',*,*,#4914,.F.);+#10802=CYLINDRICAL_SURFACE('',#10803,0.2);+#10803=AXIS2_PLACEMENT_3D('',#4919,#2936,#2953);+#10804=ADVANCED_FACE('',(#10805),#10810,.F.);+#10805=FACE_BOUND('',#10806,.F.);+#10806=EDGE_LOOP('',(#10807,#4975,#10808,#10809));+#10807=ORIENTED_EDGE('',*,*,#4968,.T.);+#10808=ORIENTED_EDGE('',*,*,#10798,.F.);+#10809=ORIENTED_EDGE('',*,*,#4909,.F.);+#10810=PLANE('',#10811);+#10811=AXIS2_PLACEMENT_3D('',#4904,#9719,#2944);+#10812=ADVANCED_FACE('',(#10813),#10820,.T.);+#10813=FACE_BOUND('',#10814,.F.);+#10814=EDGE_LOOP('',(#10815,#5153,#10818,#10819));+#10815=ORIENTED_EDGE('',*,*,#10816,.T.);+#10816=EDGE_CURVE('',#5083,#5150,#10817,.T.);+#10817=LINE('',#5084,#684);+#10818=ORIENTED_EDGE('',*,*,#9257,.F.);+#10819=ORIENTED_EDGE('',*,*,#5087,.F.);+#10820=CYLINDRICAL_SURFACE('',#10821,0.2);+#10821=AXIS2_PLACEMENT_3D('',#5047,#2936,#2990);+#10822=ADVANCED_FACE('',(#10823),#10830,.F.);+#10823=FACE_BOUND('',#10824,.F.);+#10824=EDGE_LOOP('',(#10825,#5148,#10828,#10829));+#10825=ORIENTED_EDGE('',*,*,#10826,.T.);+#10826=EDGE_CURVE('',#5077,#5144,#10827,.T.);+#10827=LINE('',#5078,#684);+#10828=ORIENTED_EDGE('',*,*,#10816,.F.);+#10829=ORIENTED_EDGE('',*,*,#5082,.F.);+#10830=PLANE('',#10831);+#10831=AXIS2_PLACEMENT_3D('',#5078,#9660,#2983);+#10832=ADVANCED_FACE('',(#10833),#10840,.F.);+#10833=FACE_BOUND('',#10834,.F.);+#10834=EDGE_LOOP('',(#10835,#5142,#10838,#10839));+#10835=ORIENTED_EDGE('',*,*,#10836,.T.);+#10836=EDGE_CURVE('',#5072,#5139,#10837,.T.);+#10837=LINE('',#5073,#684);+#10838=ORIENTED_EDGE('',*,*,#10826,.F.);+#10839=ORIENTED_EDGE('',*,*,#5076,.F.);+#10840=CYLINDRICAL_SURFACE('',#10841,0.1);+#10841=AXIS2_PLACEMENT_3D('',#5059,#2936,#2976);+#10842=ADVANCED_FACE('',(#10843),#10850,.F.);+#10843=FACE_BOUND('',#10844,.F.);+#10844=EDGE_LOOP('',(#10845,#5137,#10848,#10849));+#10845=ORIENTED_EDGE('',*,*,#10846,.T.);+#10846=EDGE_CURVE('',#5067,#5134,#10847,.T.);+#10847=LINE('',#5068,#684);+#10848=ORIENTED_EDGE('',*,*,#10836,.F.);+#10849=ORIENTED_EDGE('',*,*,#5071,.F.);+#10850=PLANE('',#10851);+#10851=AXIS2_PLACEMENT_3D('',#5068,#2450,#623);+#10852=ADVANCED_FACE('',(#10853),#10860,.F.);+#10853=FACE_BOUND('',#10854,.F.);+#10854=EDGE_LOOP('',(#10855,#5132,#10858,#10859));+#10855=ORIENTED_EDGE('',*,*,#10856,.T.);+#10856=EDGE_CURVE('',#5062,#5129,#10857,.T.);+#10857=LINE('',#5063,#684);+#10858=ORIENTED_EDGE('',*,*,#10846,.F.);+#10859=ORIENTED_EDGE('',*,*,#5066,.F.);+#10860=PLANE('',#10861);+#10861=AXIS2_PLACEMENT_3D('',#5063,#623,#13);+#10862=ADVANCED_FACE('',(#10863),#10870,.F.);+#10863=FACE_BOUND('',#10864,.F.);+#10864=EDGE_LOOP('',(#10865,#5127,#10868,#10869));+#10865=ORIENTED_EDGE('',*,*,#10866,.T.);+#10866=EDGE_CURVE('',#5055,#5122,#10867,.T.);+#10867=LINE('',#5056,#684);+#10868=ORIENTED_EDGE('',*,*,#10856,.F.);+#10869=ORIENTED_EDGE('',*,*,#5061,.F.);+#10870=PLANE('',#10871);+#10871=AXIS2_PLACEMENT_3D('',#5056,#13,#673);+#10872=ADVANCED_FACE('',(#10873),#10880,.T.);+#10873=FACE_BOUND('',#10874,.F.);+#10874=EDGE_LOOP('',(#10875,#5120,#10878,#10879));+#10875=ORIENTED_EDGE('',*,*,#10876,.T.);+#10876=EDGE_CURVE('',#5050,#5117,#10877,.T.);+#10877=LINE('',#5051,#684);+#10878=ORIENTED_EDGE('',*,*,#10866,.F.);+#10879=ORIENTED_EDGE('',*,*,#5054,.F.);+#10880=CYLINDRICAL_SURFACE('',#10881,0.2);+#10881=AXIS2_PLACEMENT_3D('',#5059,#2936,#2953);+#10882=ADVANCED_FACE('',(#10883),#10888,.F.);+#10883=FACE_BOUND('',#10884,.F.);+#10884=EDGE_LOOP('',(#10885,#5115,#10886,#10887));+#10885=ORIENTED_EDGE('',*,*,#5108,.T.);+#10886=ORIENTED_EDGE('',*,*,#10876,.F.);+#10887=ORIENTED_EDGE('',*,*,#5049,.F.);+#10888=PLANE('',#10889);+#10889=AXIS2_PLACEMENT_3D('',#5044,#9719,#2944);+#10890=ADVANCED_FACE('',(#10891),#10898,.T.);+#10891=FACE_BOUND('',#10892,.F.);+#10892=EDGE_LOOP('',(#10893,#5293,#10896,#10897));+#10893=ORIENTED_EDGE('',*,*,#10894,.T.);+#10894=EDGE_CURVE('',#5223,#5290,#10895,.T.);+#10895=LINE('',#5224,#684);+#10896=ORIENTED_EDGE('',*,*,#9269,.F.);+#10897=ORIENTED_EDGE('',*,*,#5227,.F.);+#10898=CYLINDRICAL_SURFACE('',#10899,0.2);+#10899=AXIS2_PLACEMENT_3D('',#5187,#2936,#2990);+#10900=ADVANCED_FACE('',(#10901),#10908,.F.);+#10901=FACE_BOUND('',#10902,.F.);+#10902=EDGE_LOOP('',(#10903,#5288,#10906,#10907));+#10903=ORIENTED_EDGE('',*,*,#10904,.T.);+#10904=EDGE_CURVE('',#5217,#5284,#10905,.T.);+#10905=LINE('',#5218,#684);+#10906=ORIENTED_EDGE('',*,*,#10894,.F.);+#10907=ORIENTED_EDGE('',*,*,#5222,.F.);+#10908=PLANE('',#10909);+#10909=AXIS2_PLACEMENT_3D('',#5218,#9660,#2983);+#10910=ADVANCED_FACE('',(#10911),#10918,.F.);+#10911=FACE_BOUND('',#10912,.F.);+#10912=EDGE_LOOP('',(#10913,#5282,#10916,#10917));+#10913=ORIENTED_EDGE('',*,*,#10914,.T.);+#10914=EDGE_CURVE('',#5212,#5279,#10915,.T.);+#10915=LINE('',#5213,#684);+#10916=ORIENTED_EDGE('',*,*,#10904,.F.);+#10917=ORIENTED_EDGE('',*,*,#5216,.F.);+#10918=CYLINDRICAL_SURFACE('',#10919,0.1);+#10919=AXIS2_PLACEMENT_3D('',#5199,#2936,#2976);+#10920=ADVANCED_FACE('',(#10921),#10928,.F.);+#10921=FACE_BOUND('',#10922,.F.);+#10922=EDGE_LOOP('',(#10923,#5277,#10926,#10927));+#10923=ORIENTED_EDGE('',*,*,#10924,.T.);+#10924=EDGE_CURVE('',#5207,#5274,#10925,.T.);+#10925=LINE('',#5208,#684);+#10926=ORIENTED_EDGE('',*,*,#10914,.F.);+#10927=ORIENTED_EDGE('',*,*,#5211,.F.);+#10928=PLANE('',#10929);+#10929=AXIS2_PLACEMENT_3D('',#5208,#2450,#623);+#10930=ADVANCED_FACE('',(#10931),#10938,.F.);+#10931=FACE_BOUND('',#10932,.F.);+#10932=EDGE_LOOP('',(#10933,#5272,#10936,#10937));+#10933=ORIENTED_EDGE('',*,*,#10934,.T.);+#10934=EDGE_CURVE('',#5202,#5269,#10935,.T.);+#10935=LINE('',#5203,#684);+#10936=ORIENTED_EDGE('',*,*,#10924,.F.);+#10937=ORIENTED_EDGE('',*,*,#5206,.F.);+#10938=PLANE('',#10939);+#10939=AXIS2_PLACEMENT_3D('',#5203,#623,#13);+#10940=ADVANCED_FACE('',(#10941),#10948,.F.);+#10941=FACE_BOUND('',#10942,.F.);+#10942=EDGE_LOOP('',(#10943,#5267,#10946,#10947));+#10943=ORIENTED_EDGE('',*,*,#10944,.T.);+#10944=EDGE_CURVE('',#5195,#5262,#10945,.T.);+#10945=LINE('',#5196,#684);+#10946=ORIENTED_EDGE('',*,*,#10934,.F.);+#10947=ORIENTED_EDGE('',*,*,#5201,.F.);+#10948=PLANE('',#10949);+#10949=AXIS2_PLACEMENT_3D('',#5196,#13,#673);+#10950=ADVANCED_FACE('',(#10951),#10958,.T.);+#10951=FACE_BOUND('',#10952,.F.);+#10952=EDGE_LOOP('',(#10953,#5260,#10956,#10957));+#10953=ORIENTED_EDGE('',*,*,#10954,.T.);+#10954=EDGE_CURVE('',#5190,#5257,#10955,.T.);+#10955=LINE('',#5191,#684);+#10956=ORIENTED_EDGE('',*,*,#10944,.F.);+#10957=ORIENTED_EDGE('',*,*,#5194,.F.);+#10958=CYLINDRICAL_SURFACE('',#10959,0.2);+#10959=AXIS2_PLACEMENT_3D('',#5199,#2936,#2953);+#10960=ADVANCED_FACE('',(#10961),#10966,.F.);+#10961=FACE_BOUND('',#10962,.F.);+#10962=EDGE_LOOP('',(#10963,#5255,#10964,#10965));+#10963=ORIENTED_EDGE('',*,*,#5248,.T.);+#10964=ORIENTED_EDGE('',*,*,#10954,.F.);+#10965=ORIENTED_EDGE('',*,*,#5189,.F.);+#10966=PLANE('',#10967);+#10967=AXIS2_PLACEMENT_3D('',#5184,#9719,#2944);+#10968=ADVANCED_FACE('',(#10969),#10976,.T.);+#10969=FACE_BOUND('',#10970,.F.);+#10970=EDGE_LOOP('',(#10971,#5433,#10974,#10975));+#10971=ORIENTED_EDGE('',*,*,#10972,.T.);+#10972=EDGE_CURVE('',#5363,#5430,#10973,.T.);+#10973=LINE('',#5364,#684);+#10974=ORIENTED_EDGE('',*,*,#9281,.F.);+#10975=ORIENTED_EDGE('',*,*,#5367,.F.);+#10976=CYLINDRICAL_SURFACE('',#10977,0.2);+#10977=AXIS2_PLACEMENT_3D('',#5327,#2936,#2990);+#10978=ADVANCED_FACE('',(#10979),#10986,.F.);+#10979=FACE_BOUND('',#10980,.F.);+#10980=EDGE_LOOP('',(#10981,#5428,#10984,#10985));+#10981=ORIENTED_EDGE('',*,*,#10982,.T.);+#10982=EDGE_CURVE('',#5357,#5424,#10983,.T.);+#10983=LINE('',#5358,#684);+#10984=ORIENTED_EDGE('',*,*,#10972,.F.);+#10985=ORIENTED_EDGE('',*,*,#5362,.F.);+#10986=PLANE('',#10987);+#10987=AXIS2_PLACEMENT_3D('',#5358,#9660,#2983);+#10988=ADVANCED_FACE('',(#10989),#10996,.F.);+#10989=FACE_BOUND('',#10990,.F.);+#10990=EDGE_LOOP('',(#10991,#5422,#10994,#10995));+#10991=ORIENTED_EDGE('',*,*,#10992,.T.);+#10992=EDGE_CURVE('',#5352,#5419,#10993,.T.);+#10993=LINE('',#5353,#684);+#10994=ORIENTED_EDGE('',*,*,#10982,.F.);+#10995=ORIENTED_EDGE('',*,*,#5356,.F.);+#10996=CYLINDRICAL_SURFACE('',#10997,0.1);+#10997=AXIS2_PLACEMENT_3D('',#5339,#2936,#2976);+#10998=ADVANCED_FACE('',(#10999),#11006,.F.);+#10999=FACE_BOUND('',#11000,.F.);+#11000=EDGE_LOOP('',(#11001,#5417,#11004,#11005));+#11001=ORIENTED_EDGE('',*,*,#11002,.T.);+#11002=EDGE_CURVE('',#5347,#5414,#11003,.T.);+#11003=LINE('',#5348,#684);+#11004=ORIENTED_EDGE('',*,*,#10992,.F.);+#11005=ORIENTED_EDGE('',*,*,#5351,.F.);+#11006=PLANE('',#11007);+#11007=AXIS2_PLACEMENT_3D('',#5348,#2450,#623);+#11008=ADVANCED_FACE('',(#11009),#11016,.F.);+#11009=FACE_BOUND('',#11010,.F.);+#11010=EDGE_LOOP('',(#11011,#5412,#11014,#11015));+#11011=ORIENTED_EDGE('',*,*,#11012,.T.);+#11012=EDGE_CURVE('',#5342,#5409,#11013,.T.);+#11013=LINE('',#5343,#684);+#11014=ORIENTED_EDGE('',*,*,#11002,.F.);+#11015=ORIENTED_EDGE('',*,*,#5346,.F.);+#11016=PLANE('',#11017);+#11017=AXIS2_PLACEMENT_3D('',#5343,#623,#13);+#11018=ADVANCED_FACE('',(#11019),#11026,.F.);+#11019=FACE_BOUND('',#11020,.F.);+#11020=EDGE_LOOP('',(#11021,#5407,#11024,#11025));+#11021=ORIENTED_EDGE('',*,*,#11022,.T.);+#11022=EDGE_CURVE('',#5335,#5402,#11023,.T.);+#11023=LINE('',#5336,#684);+#11024=ORIENTED_EDGE('',*,*,#11012,.F.);+#11025=ORIENTED_EDGE('',*,*,#5341,.F.);+#11026=PLANE('',#11027);+#11027=AXIS2_PLACEMENT_3D('',#5336,#13,#673);+#11028=ADVANCED_FACE('',(#11029),#11036,.T.);+#11029=FACE_BOUND('',#11030,.F.);+#11030=EDGE_LOOP('',(#11031,#5400,#11034,#11035));+#11031=ORIENTED_EDGE('',*,*,#11032,.T.);+#11032=EDGE_CURVE('',#5330,#5397,#11033,.T.);+#11033=LINE('',#5331,#684);+#11034=ORIENTED_EDGE('',*,*,#11022,.F.);+#11035=ORIENTED_EDGE('',*,*,#5334,.F.);+#11036=CYLINDRICAL_SURFACE('',#11037,0.2);+#11037=AXIS2_PLACEMENT_3D('',#5339,#2936,#2953);+#11038=ADVANCED_FACE('',(#11039),#11044,.F.);+#11039=FACE_BOUND('',#11040,.F.);+#11040=EDGE_LOOP('',(#11041,#5395,#11042,#11043));+#11041=ORIENTED_EDGE('',*,*,#5388,.T.);+#11042=ORIENTED_EDGE('',*,*,#11032,.F.);+#11043=ORIENTED_EDGE('',*,*,#5329,.F.);+#11044=PLANE('',#11045);+#11045=AXIS2_PLACEMENT_3D('',#5324,#9719,#2944);+#11046=ADVANCED_FACE('',(#11047),#11054,.T.);+#11047=FACE_BOUND('',#11048,.F.);+#11048=EDGE_LOOP('',(#11049,#5573,#11052,#11053));+#11049=ORIENTED_EDGE('',*,*,#11050,.T.);+#11050=EDGE_CURVE('',#5503,#5570,#11051,.T.);+#11051=LINE('',#5504,#684);+#11052=ORIENTED_EDGE('',*,*,#9293,.F.);+#11053=ORIENTED_EDGE('',*,*,#5507,.F.);+#11054=CYLINDRICAL_SURFACE('',#11055,0.2);+#11055=AXIS2_PLACEMENT_3D('',#5467,#2936,#2990);+#11056=ADVANCED_FACE('',(#11057),#11064,.F.);+#11057=FACE_BOUND('',#11058,.F.);+#11058=EDGE_LOOP('',(#11059,#5568,#11062,#11063));+#11059=ORIENTED_EDGE('',*,*,#11060,.T.);+#11060=EDGE_CURVE('',#5497,#5564,#11061,.T.);+#11061=LINE('',#5498,#684);+#11062=ORIENTED_EDGE('',*,*,#11050,.F.);+#11063=ORIENTED_EDGE('',*,*,#5502,.F.);+#11064=PLANE('',#11065);+#11065=AXIS2_PLACEMENT_3D('',#5498,#9660,#2983);+#11066=ADVANCED_FACE('',(#11067),#11074,.F.);+#11067=FACE_BOUND('',#11068,.F.);+#11068=EDGE_LOOP('',(#11069,#5562,#11072,#11073));+#11069=ORIENTED_EDGE('',*,*,#11070,.T.);+#11070=EDGE_CURVE('',#5492,#5559,#11071,.T.);+#11071=LINE('',#5493,#684);+#11072=ORIENTED_EDGE('',*,*,#11060,.F.);+#11073=ORIENTED_EDGE('',*,*,#5496,.F.);+#11074=CYLINDRICAL_SURFACE('',#11075,0.1);+#11075=AXIS2_PLACEMENT_3D('',#5479,#2936,#2976);+#11076=ADVANCED_FACE('',(#11077),#11084,.F.);+#11077=FACE_BOUND('',#11078,.F.);+#11078=EDGE_LOOP('',(#11079,#5557,#11082,#11083));+#11079=ORIENTED_EDGE('',*,*,#11080,.T.);+#11080=EDGE_CURVE('',#5487,#5554,#11081,.T.);+#11081=LINE('',#5488,#684);+#11082=ORIENTED_EDGE('',*,*,#11070,.F.);+#11083=ORIENTED_EDGE('',*,*,#5491,.F.);+#11084=PLANE('',#11085);+#11085=AXIS2_PLACEMENT_3D('',#5488,#2450,#623);+#11086=ADVANCED_FACE('',(#11087),#11094,.F.);+#11087=FACE_BOUND('',#11088,.F.);+#11088=EDGE_LOOP('',(#11089,#5552,#11092,#11093));+#11089=ORIENTED_EDGE('',*,*,#11090,.T.);+#11090=EDGE_CURVE('',#5482,#5549,#11091,.T.);+#11091=LINE('',#5483,#684);+#11092=ORIENTED_EDGE('',*,*,#11080,.F.);+#11093=ORIENTED_EDGE('',*,*,#5486,.F.);+#11094=PLANE('',#11095);+#11095=AXIS2_PLACEMENT_3D('',#5483,#623,#13);+#11096=ADVANCED_FACE('',(#11097),#11104,.F.);+#11097=FACE_BOUND('',#11098,.F.);+#11098=EDGE_LOOP('',(#11099,#5547,#11102,#11103));+#11099=ORIENTED_EDGE('',*,*,#11100,.T.);+#11100=EDGE_CURVE('',#5475,#5542,#11101,.T.);+#11101=LINE('',#5476,#684);+#11102=ORIENTED_EDGE('',*,*,#11090,.F.);+#11103=ORIENTED_EDGE('',*,*,#5481,.F.);+#11104=PLANE('',#11105);+#11105=AXIS2_PLACEMENT_3D('',#5476,#13,#673);+#11106=ADVANCED_FACE('',(#11107),#11114,.T.);+#11107=FACE_BOUND('',#11108,.F.);+#11108=EDGE_LOOP('',(#11109,#5540,#11112,#11113));+#11109=ORIENTED_EDGE('',*,*,#11110,.T.);+#11110=EDGE_CURVE('',#5470,#5537,#11111,.T.);+#11111=LINE('',#5471,#684);+#11112=ORIENTED_EDGE('',*,*,#11100,.F.);+#11113=ORIENTED_EDGE('',*,*,#5474,.F.);+#11114=CYLINDRICAL_SURFACE('',#11115,0.2);+#11115=AXIS2_PLACEMENT_3D('',#5479,#2936,#2953);+#11116=ADVANCED_FACE('',(#11117),#11122,.F.);+#11117=FACE_BOUND('',#11118,.F.);+#11118=EDGE_LOOP('',(#11119,#5535,#11120,#11121));+#11119=ORIENTED_EDGE('',*,*,#5528,.T.);+#11120=ORIENTED_EDGE('',*,*,#11110,.F.);+#11121=ORIENTED_EDGE('',*,*,#5469,.F.);+#11122=PLANE('',#11123);+#11123=AXIS2_PLACEMENT_3D('',#5464,#9719,#2944);+#11124=ADVANCED_FACE('',(#11125),#11132,.T.);+#11125=FACE_BOUND('',#11126,.F.);+#11126=EDGE_LOOP('',(#11127,#5713,#11130,#11131));+#11127=ORIENTED_EDGE('',*,*,#11128,.T.);+#11128=EDGE_CURVE('',#5643,#5710,#11129,.T.);+#11129=LINE('',#5644,#684);+#11130=ORIENTED_EDGE('',*,*,#9305,.F.);+#11131=ORIENTED_EDGE('',*,*,#5647,.F.);+#11132=CYLINDRICAL_SURFACE('',#11133,0.2);+#11133=AXIS2_PLACEMENT_3D('',#5607,#2936,#2990);+#11134=ADVANCED_FACE('',(#11135),#11142,.F.);+#11135=FACE_BOUND('',#11136,.F.);+#11136=EDGE_LOOP('',(#11137,#5708,#11140,#11141));+#11137=ORIENTED_EDGE('',*,*,#11138,.T.);+#11138=EDGE_CURVE('',#5637,#5704,#11139,.T.);+#11139=LINE('',#5638,#684);+#11140=ORIENTED_EDGE('',*,*,#11128,.F.);+#11141=ORIENTED_EDGE('',*,*,#5642,.F.);+#11142=PLANE('',#11143);+#11143=AXIS2_PLACEMENT_3D('',#5638,#9660,#2983);+#11144=ADVANCED_FACE('',(#11145),#11152,.F.);+#11145=FACE_BOUND('',#11146,.F.);+#11146=EDGE_LOOP('',(#11147,#5702,#11150,#11151));+#11147=ORIENTED_EDGE('',*,*,#11148,.T.);+#11148=EDGE_CURVE('',#5632,#5699,#11149,.T.);+#11149=LINE('',#5633,#684);+#11150=ORIENTED_EDGE('',*,*,#11138,.F.);+#11151=ORIENTED_EDGE('',*,*,#5636,.F.);+#11152=CYLINDRICAL_SURFACE('',#11153,0.1);+#11153=AXIS2_PLACEMENT_3D('',#5619,#2936,#2976);+#11154=ADVANCED_FACE('',(#11155),#11162,.F.);+#11155=FACE_BOUND('',#11156,.F.);+#11156=EDGE_LOOP('',(#11157,#5697,#11160,#11161));+#11157=ORIENTED_EDGE('',*,*,#11158,.T.);+#11158=EDGE_CURVE('',#5627,#5694,#11159,.T.);+#11159=LINE('',#5628,#684);+#11160=ORIENTED_EDGE('',*,*,#11148,.F.);+#11161=ORIENTED_EDGE('',*,*,#5631,.F.);+#11162=PLANE('',#11163);+#11163=AXIS2_PLACEMENT_3D('',#5628,#2450,#623);+#11164=ADVANCED_FACE('',(#11165),#11172,.F.);+#11165=FACE_BOUND('',#11166,.F.);+#11166=EDGE_LOOP('',(#11167,#5692,#11170,#11171));+#11167=ORIENTED_EDGE('',*,*,#11168,.T.);+#11168=EDGE_CURVE('',#5622,#5689,#11169,.T.);+#11169=LINE('',#5623,#684);+#11170=ORIENTED_EDGE('',*,*,#11158,.F.);+#11171=ORIENTED_EDGE('',*,*,#5626,.F.);+#11172=PLANE('',#11173);+#11173=AXIS2_PLACEMENT_3D('',#5623,#623,#13);+#11174=ADVANCED_FACE('',(#11175),#11182,.F.);+#11175=FACE_BOUND('',#11176,.F.);+#11176=EDGE_LOOP('',(#11177,#5687,#11180,#11181));+#11177=ORIENTED_EDGE('',*,*,#11178,.T.);+#11178=EDGE_CURVE('',#5615,#5682,#11179,.T.);+#11179=LINE('',#5616,#684);+#11180=ORIENTED_EDGE('',*,*,#11168,.F.);+#11181=ORIENTED_EDGE('',*,*,#5621,.F.);+#11182=PLANE('',#11183);+#11183=AXIS2_PLACEMENT_3D('',#5616,#13,#673);+#11184=ADVANCED_FACE('',(#11185),#11192,.T.);+#11185=FACE_BOUND('',#11186,.F.);+#11186=EDGE_LOOP('',(#11187,#5680,#11190,#11191));+#11187=ORIENTED_EDGE('',*,*,#11188,.T.);+#11188=EDGE_CURVE('',#5610,#5677,#11189,.T.);+#11189=LINE('',#5611,#684);+#11190=ORIENTED_EDGE('',*,*,#11178,.F.);+#11191=ORIENTED_EDGE('',*,*,#5614,.F.);+#11192=CYLINDRICAL_SURFACE('',#11193,0.2);+#11193=AXIS2_PLACEMENT_3D('',#5619,#2936,#2953);+#11194=ADVANCED_FACE('',(#11195),#11200,.F.);+#11195=FACE_BOUND('',#11196,.F.);+#11196=EDGE_LOOP('',(#11197,#5675,#11198,#11199));+#11197=ORIENTED_EDGE('',*,*,#5668,.T.);+#11198=ORIENTED_EDGE('',*,*,#11188,.F.);+#11199=ORIENTED_EDGE('',*,*,#5609,.F.);+#11200=PLANE('',#11201);+#11201=AXIS2_PLACEMENT_3D('',#5604,#9719,#2944);+#11202=ADVANCED_FACE('',(#11203),#11210,.T.);+#11203=FACE_BOUND('',#11204,.F.);+#11204=EDGE_LOOP('',(#11205,#5853,#11208,#11209));+#11205=ORIENTED_EDGE('',*,*,#11206,.T.);+#11206=EDGE_CURVE('',#5783,#5850,#11207,.T.);+#11207=LINE('',#5784,#684);+#11208=ORIENTED_EDGE('',*,*,#9317,.F.);+#11209=ORIENTED_EDGE('',*,*,#5787,.F.);+#11210=CYLINDRICAL_SURFACE('',#11211,0.2);+#11211=AXIS2_PLACEMENT_3D('',#5747,#2936,#2990);+#11212=ADVANCED_FACE('',(#11213),#11220,.F.);+#11213=FACE_BOUND('',#11214,.F.);+#11214=EDGE_LOOP('',(#11215,#5848,#11218,#11219));+#11215=ORIENTED_EDGE('',*,*,#11216,.T.);+#11216=EDGE_CURVE('',#5777,#5844,#11217,.T.);+#11217=LINE('',#5778,#684);+#11218=ORIENTED_EDGE('',*,*,#11206,.F.);+#11219=ORIENTED_EDGE('',*,*,#5782,.F.);+#11220=PLANE('',#11221);+#11221=AXIS2_PLACEMENT_3D('',#5778,#9660,#2983);+#11222=ADVANCED_FACE('',(#11223),#11230,.F.);+#11223=FACE_BOUND('',#11224,.F.);+#11224=EDGE_LOOP('',(#11225,#5842,#11228,#11229));+#11225=ORIENTED_EDGE('',*,*,#11226,.T.);+#11226=EDGE_CURVE('',#5772,#5839,#11227,.T.);+#11227=LINE('',#5773,#684);+#11228=ORIENTED_EDGE('',*,*,#11216,.F.);+#11229=ORIENTED_EDGE('',*,*,#5776,.F.);+#11230=CYLINDRICAL_SURFACE('',#11231,0.1);+#11231=AXIS2_PLACEMENT_3D('',#5759,#2936,#2976);+#11232=ADVANCED_FACE('',(#11233),#11240,.F.);+#11233=FACE_BOUND('',#11234,.F.);+#11234=EDGE_LOOP('',(#11235,#5837,#11238,#11239));+#11235=ORIENTED_EDGE('',*,*,#11236,.T.);+#11236=EDGE_CURVE('',#5767,#5834,#11237,.T.);+#11237=LINE('',#5768,#684);+#11238=ORIENTED_EDGE('',*,*,#11226,.F.);+#11239=ORIENTED_EDGE('',*,*,#5771,.F.);+#11240=PLANE('',#11241);+#11241=AXIS2_PLACEMENT_3D('',#5768,#2450,#623);+#11242=ADVANCED_FACE('',(#11243),#11250,.F.);+#11243=FACE_BOUND('',#11244,.F.);+#11244=EDGE_LOOP('',(#11245,#5832,#11248,#11249));+#11245=ORIENTED_EDGE('',*,*,#11246,.T.);+#11246=EDGE_CURVE('',#5762,#5829,#11247,.T.);+#11247=LINE('',#5763,#684);+#11248=ORIENTED_EDGE('',*,*,#11236,.F.);+#11249=ORIENTED_EDGE('',*,*,#5766,.F.);+#11250=PLANE('',#11251);+#11251=AXIS2_PLACEMENT_3D('',#5763,#623,#13);+#11252=ADVANCED_FACE('',(#11253),#11260,.F.);+#11253=FACE_BOUND('',#11254,.F.);+#11254=EDGE_LOOP('',(#11255,#5827,#11258,#11259));+#11255=ORIENTED_EDGE('',*,*,#11256,.T.);+#11256=EDGE_CURVE('',#5755,#5822,#11257,.T.);+#11257=LINE('',#5756,#684);+#11258=ORIENTED_EDGE('',*,*,#11246,.F.);+#11259=ORIENTED_EDGE('',*,*,#5761,.F.);+#11260=PLANE('',#11261);+#11261=AXIS2_PLACEMENT_3D('',#5756,#13,#673);+#11262=ADVANCED_FACE('',(#11263),#11270,.T.);+#11263=FACE_BOUND('',#11264,.F.);+#11264=EDGE_LOOP('',(#11265,#5820,#11268,#11269));+#11265=ORIENTED_EDGE('',*,*,#11266,.T.);+#11266=EDGE_CURVE('',#5750,#5817,#11267,.T.);+#11267=LINE('',#5751,#684);+#11268=ORIENTED_EDGE('',*,*,#11256,.F.);+#11269=ORIENTED_EDGE('',*,*,#5754,.F.);+#11270=CYLINDRICAL_SURFACE('',#11271,0.2);+#11271=AXIS2_PLACEMENT_3D('',#5759,#2936,#2953);+#11272=ADVANCED_FACE('',(#11273),#11278,.F.);+#11273=FACE_BOUND('',#11274,.F.);+#11274=EDGE_LOOP('',(#11275,#5815,#11276,#11277));+#11275=ORIENTED_EDGE('',*,*,#5808,.T.);+#11276=ORIENTED_EDGE('',*,*,#11266,.F.);+#11277=ORIENTED_EDGE('',*,*,#5749,.F.);+#11278=PLANE('',#11279);+#11279=AXIS2_PLACEMENT_3D('',#5744,#9719,#2944);+#11280=ADVANCED_FACE('',(#11281),#11288,.F.);+#11281=FACE_BOUND('',#11282,.F.);+#11282=EDGE_LOOP('',(#11283,#5983,#11286,#11287));+#11283=ORIENTED_EDGE('',*,*,#11284,.T.);+#11284=EDGE_CURVE('',#5914,#5979,#11285,.T.);+#11285=LINE('',#5915,#684);+#11286=ORIENTED_EDGE('',*,*,#9066,.F.);+#11287=ORIENTED_EDGE('',*,*,#5919,.F.);+#11288=PLANE('',#11289);+#11289=AXIS2_PLACEMENT_3D('',#5915,#9660,#2983);+#11290=ADVANCED_FACE('',(#11291),#11298,.F.);+#11291=FACE_BOUND('',#11292,.F.);+#11292=EDGE_LOOP('',(#11293,#5977,#11296,#11297));+#11293=ORIENTED_EDGE('',*,*,#11294,.T.);+#11294=EDGE_CURVE('',#5909,#5974,#11295,.T.);+#11295=LINE('',#5910,#684);+#11296=ORIENTED_EDGE('',*,*,#11284,.F.);+#11297=ORIENTED_EDGE('',*,*,#5913,.F.);+#11298=CYLINDRICAL_SURFACE('',#11299,0.1);+#11299=AXIS2_PLACEMENT_3D('',#5896,#2936,#2976);+#11300=ADVANCED_FACE('',(#11301),#11308,.F.);+#11301=FACE_BOUND('',#11302,.F.);+#11302=EDGE_LOOP('',(#11303,#5972,#11306,#11307));+#11303=ORIENTED_EDGE('',*,*,#11304,.T.);+#11304=EDGE_CURVE('',#5904,#5969,#11305,.T.);+#11305=LINE('',#5905,#684);+#11306=ORIENTED_EDGE('',*,*,#11294,.F.);+#11307=ORIENTED_EDGE('',*,*,#5908,.F.);+#11308=PLANE('',#11309);+#11309=AXIS2_PLACEMENT_3D('',#5905,#2450,#623);+#11310=ADVANCED_FACE('',(#11311),#11318,.F.);+#11311=FACE_BOUND('',#11312,.F.);+#11312=EDGE_LOOP('',(#11313,#5967,#11316,#11317));+#11313=ORIENTED_EDGE('',*,*,#11314,.T.);+#11314=EDGE_CURVE('',#5899,#5964,#11315,.T.);+#11315=LINE('',#5900,#684);+#11316=ORIENTED_EDGE('',*,*,#11304,.F.);+#11317=ORIENTED_EDGE('',*,*,#5903,.F.);+#11318=PLANE('',#11319);+#11319=AXIS2_PLACEMENT_3D('',#5900,#623,#13);+#11320=ADVANCED_FACE('',(#11321),#11328,.F.);+#11321=FACE_BOUND('',#11322,.F.);+#11322=EDGE_LOOP('',(#11323,#5962,#11326,#11327));+#11323=ORIENTED_EDGE('',*,*,#11324,.T.);+#11324=EDGE_CURVE('',#5892,#5957,#11325,.T.);+#11325=LINE('',#5893,#684);+#11326=ORIENTED_EDGE('',*,*,#11314,.F.);+#11327=ORIENTED_EDGE('',*,*,#5898,.F.);+#11328=PLANE('',#11329);+#11329=AXIS2_PLACEMENT_3D('',#5893,#13,#673);+#11330=ADVANCED_FACE('',(#11331),#11338,.T.);+#11331=FACE_BOUND('',#11332,.F.);+#11332=EDGE_LOOP('',(#11333,#5955,#11336,#11337));+#11333=ORIENTED_EDGE('',*,*,#11334,.T.);+#11334=EDGE_CURVE('',#5887,#5952,#11335,.T.);+#11335=LINE('',#5888,#684);+#11336=ORIENTED_EDGE('',*,*,#11324,.F.);+#11337=ORIENTED_EDGE('',*,*,#5891,.F.);+#11338=CYLINDRICAL_SURFACE('',#11339,0.2);+#11339=AXIS2_PLACEMENT_3D('',#5896,#2936,#2953);+#11340=ADVANCED_FACE('',(#11341),#11346,.F.);+#11341=FACE_BOUND('',#11342,.F.);+#11342=EDGE_LOOP('',(#11343,#5950,#11344,#11345));+#11343=ORIENTED_EDGE('',*,*,#5943,.T.);+#11344=ORIENTED_EDGE('',*,*,#11334,.F.);+#11345=ORIENTED_EDGE('',*,*,#5886,.F.);+#11346=PLANE('',#11347);+#11347=AXIS2_PLACEMENT_3D('',#5881,#9719,#2944);+#11348=ADVANCED_FACE('',(#11349),#11356,.F.);+#11349=FACE_BOUND('',#11350,.F.);+#11350=EDGE_LOOP('',(#11351,#6113,#11354,#11355));+#11351=ORIENTED_EDGE('',*,*,#11352,.T.);+#11352=EDGE_CURVE('',#6040,#6109,#11353,.T.);+#11353=LINE('',#6041,#58);+#11354=ORIENTED_EDGE('',*,*,#9627,.F.);+#11355=ORIENTED_EDGE('',*,*,#6046,.F.);+#11356=PLANE('',#11357);+#11357=AXIS2_PLACEMENT_3D('',#6041,#11358,#6051);+#11358=DIRECTION('',(-0.986188825682,-1.0948895409E-16,-0.165624877661));+#11359=ADVANCED_FACE('',(#11360),#11367,.F.);+#11360=FACE_BOUND('',#11361,.F.);+#11361=EDGE_LOOP('',(#11362,#6107,#11365,#11366));+#11362=ORIENTED_EDGE('',*,*,#11363,.T.);+#11363=EDGE_CURVE('',#6035,#6104,#11364,.T.);+#11364=LINE('',#6036,#58);+#11365=ORIENTED_EDGE('',*,*,#11352,.F.);+#11366=ORIENTED_EDGE('',*,*,#6039,.F.);+#11367=CYLINDRICAL_SURFACE('',#6043,0.1);+#11368=ADVANCED_FACE('',(#11369),#11376,.F.);+#11369=FACE_BOUND('',#11370,.F.);+#11370=EDGE_LOOP('',(#11371,#6102,#11374,#11375));+#11371=ORIENTED_EDGE('',*,*,#11372,.T.);+#11372=EDGE_CURVE('',#6030,#6099,#11373,.T.);+#11373=LINE('',#6031,#58);+#11374=ORIENTED_EDGE('',*,*,#11363,.F.);+#11375=ORIENTED_EDGE('',*,*,#6034,.F.);+#11376=PLANE('',#11377);+#11377=AXIS2_PLACEMENT_3D('',#6031,#2450,#73);+#11378=ADVANCED_FACE('',(#11379),#11386,.F.);+#11379=FACE_BOUND('',#11380,.F.);+#11380=EDGE_LOOP('',(#11381,#6097,#11384,#11385));+#11381=ORIENTED_EDGE('',*,*,#11382,.T.);+#11382=EDGE_CURVE('',#6025,#6094,#11383,.T.);+#11383=LINE('',#6026,#58);+#11384=ORIENTED_EDGE('',*,*,#11372,.F.);+#11385=ORIENTED_EDGE('',*,*,#6029,.F.);+#11386=PLANE('',#11387);+#11387=AXIS2_PLACEMENT_3D('',#6026,#73,#13);+#11388=ADVANCED_FACE('',(#11389),#11396,.F.);+#11389=FACE_BOUND('',#11390,.F.);+#11390=EDGE_LOOP('',(#11391,#6092,#11394,#11395));+#11391=ORIENTED_EDGE('',*,*,#11392,.T.);+#11392=EDGE_CURVE('',#6017,#6087,#11393,.T.);+#11393=LINE('',#6018,#58);+#11394=ORIENTED_EDGE('',*,*,#11382,.F.);+#11395=ORIENTED_EDGE('',*,*,#6024,.F.);+#11396=PLANE('',#11397);+#11397=AXIS2_PLACEMENT_3D('',#6018,#13,#28);+#11398=ADVANCED_FACE('',(#11399),#11406,.T.);+#11399=FACE_BOUND('',#11400,.F.);+#11400=EDGE_LOOP('',(#11401,#6085,#11404,#11405));+#11401=ORIENTED_EDGE('',*,*,#11402,.T.);+#11402=EDGE_CURVE('',#6010,#6082,#11403,.T.);+#11403=LINE('',#6011,#58);+#11404=ORIENTED_EDGE('',*,*,#11392,.F.);+#11405=ORIENTED_EDGE('',*,*,#6016,.F.);+#11406=CYLINDRICAL_SURFACE('',#11407,0.2);+#11407=AXIS2_PLACEMENT_3D('',#6021,#87,#6022);+#11408=ADVANCED_FACE('',(#11409),#11414,.F.);+#11409=FACE_BOUND('',#11410,.F.);+#11410=EDGE_LOOP('',(#11411,#6080,#11412,#11413));+#11411=ORIENTED_EDGE('',*,*,#6073,.T.);+#11412=ORIENTED_EDGE('',*,*,#11402,.F.);+#11413=ORIENTED_EDGE('',*,*,#6009,.F.);+#11414=PLANE('',#11415);+#11415=AXIS2_PLACEMENT_3D('',#6003,#11416,#6014);+#11416=DIRECTION('',(0.986188825682,1.0948895409E-16,0.165624877661));+#11417=ADVANCED_FACE('',(#11418),#11425,.T.);+#11418=FACE_BOUND('',#11419,.F.);+#11419=EDGE_LOOP('',(#11420,#6252,#11423,#11424));+#11420=ORIENTED_EDGE('',*,*,#11421,.T.);+#11421=EDGE_CURVE('',#6182,#6249,#11422,.T.);+#11422=LINE('',#6183,#58);+#11423=ORIENTED_EDGE('',*,*,#9367,.F.);+#11424=ORIENTED_EDGE('',*,*,#6186,.F.);+#11425=CYLINDRICAL_SURFACE('',#11426,0.2);+#11426=AXIS2_PLACEMENT_3D('',#6146,#87,#6056);+#11427=ADVANCED_FACE('',(#11428),#11435,.F.);+#11428=FACE_BOUND('',#11429,.F.);+#11429=EDGE_LOOP('',(#11430,#6247,#11433,#11434));+#11430=ORIENTED_EDGE('',*,*,#11431,.T.);+#11431=EDGE_CURVE('',#6176,#6243,#11432,.T.);+#11432=LINE('',#6177,#58);+#11433=ORIENTED_EDGE('',*,*,#11421,.F.);+#11434=ORIENTED_EDGE('',*,*,#6181,.F.);+#11435=PLANE('',#11436);+#11436=AXIS2_PLACEMENT_3D('',#6177,#11358,#6051);+#11437=ADVANCED_FACE('',(#11438),#11445,.F.);+#11438=FACE_BOUND('',#11439,.F.);+#11439=EDGE_LOOP('',(#11440,#6241,#11443,#11444));+#11440=ORIENTED_EDGE('',*,*,#11441,.T.);+#11441=EDGE_CURVE('',#6171,#6238,#11442,.T.);+#11442=LINE('',#6172,#58);+#11443=ORIENTED_EDGE('',*,*,#11431,.F.);+#11444=ORIENTED_EDGE('',*,*,#6175,.F.);+#11445=CYLINDRICAL_SURFACE('',#6179,0.1);+#11446=ADVANCED_FACE('',(#11447),#11454,.F.);+#11447=FACE_BOUND('',#11448,.F.);+#11448=EDGE_LOOP('',(#11449,#6236,#11452,#11453));+#11449=ORIENTED_EDGE('',*,*,#11450,.T.);+#11450=EDGE_CURVE('',#6166,#6233,#11451,.T.);+#11451=LINE('',#6167,#58);+#11452=ORIENTED_EDGE('',*,*,#11441,.F.);+#11453=ORIENTED_EDGE('',*,*,#6170,.F.);+#11454=PLANE('',#11455);+#11455=AXIS2_PLACEMENT_3D('',#6167,#2450,#73);+#11456=ADVANCED_FACE('',(#11457),#11464,.F.);+#11457=FACE_BOUND('',#11458,.F.);+#11458=EDGE_LOOP('',(#11459,#6231,#11462,#11463));+#11459=ORIENTED_EDGE('',*,*,#11460,.T.);+#11460=EDGE_CURVE('',#6161,#6228,#11461,.T.);+#11461=LINE('',#6162,#58);+#11462=ORIENTED_EDGE('',*,*,#11450,.F.);+#11463=ORIENTED_EDGE('',*,*,#6165,.F.);+#11464=PLANE('',#11465);+#11465=AXIS2_PLACEMENT_3D('',#6162,#73,#13);+#11466=ADVANCED_FACE('',(#11467),#11474,.F.);+#11467=FACE_BOUND('',#11468,.F.);+#11468=EDGE_LOOP('',(#11469,#6226,#11472,#11473));+#11469=ORIENTED_EDGE('',*,*,#11470,.T.);+#11470=EDGE_CURVE('',#6154,#6221,#11471,.T.);+#11471=LINE('',#6155,#58);+#11472=ORIENTED_EDGE('',*,*,#11460,.F.);+#11473=ORIENTED_EDGE('',*,*,#6160,.F.);+#11474=PLANE('',#11475);+#11475=AXIS2_PLACEMENT_3D('',#6155,#13,#28);+#11476=ADVANCED_FACE('',(#11477),#11484,.T.);+#11477=FACE_BOUND('',#11478,.F.);+#11478=EDGE_LOOP('',(#11479,#6219,#11482,#11483));+#11479=ORIENTED_EDGE('',*,*,#11480,.T.);+#11480=EDGE_CURVE('',#6149,#6216,#11481,.T.);+#11481=LINE('',#6150,#58);+#11482=ORIENTED_EDGE('',*,*,#11470,.F.);+#11483=ORIENTED_EDGE('',*,*,#6153,.F.);+#11484=CYLINDRICAL_SURFACE('',#11485,0.2);+#11485=AXIS2_PLACEMENT_3D('',#6158,#87,#6022);+#11486=ADVANCED_FACE('',(#11487),#11492,.F.);+#11487=FACE_BOUND('',#11488,.F.);+#11488=EDGE_LOOP('',(#11489,#6214,#11490,#11491));+#11489=ORIENTED_EDGE('',*,*,#6207,.T.);+#11490=ORIENTED_EDGE('',*,*,#11480,.F.);+#11491=ORIENTED_EDGE('',*,*,#6148,.F.);+#11492=PLANE('',#11493);+#11493=AXIS2_PLACEMENT_3D('',#6143,#11416,#6014);+#11494=ADVANCED_FACE('',(#11495),#11502,.T.);+#11495=FACE_BOUND('',#11496,.F.);+#11496=EDGE_LOOP('',(#11497,#6392,#11500,#11501));+#11497=ORIENTED_EDGE('',*,*,#11498,.T.);+#11498=EDGE_CURVE('',#6322,#6389,#11499,.T.);+#11499=LINE('',#6323,#58);+#11500=ORIENTED_EDGE('',*,*,#9379,.F.);+#11501=ORIENTED_EDGE('',*,*,#6326,.F.);+#11502=CYLINDRICAL_SURFACE('',#11503,0.2);+#11503=AXIS2_PLACEMENT_3D('',#6286,#87,#6056);+#11504=ADVANCED_FACE('',(#11505),#11512,.F.);+#11505=FACE_BOUND('',#11506,.F.);+#11506=EDGE_LOOP('',(#11507,#6387,#11510,#11511));+#11507=ORIENTED_EDGE('',*,*,#11508,.T.);+#11508=EDGE_CURVE('',#6316,#6383,#11509,.T.);+#11509=LINE('',#6317,#58);+#11510=ORIENTED_EDGE('',*,*,#11498,.F.);+#11511=ORIENTED_EDGE('',*,*,#6321,.F.);+#11512=PLANE('',#11513);+#11513=AXIS2_PLACEMENT_3D('',#6317,#11358,#6051);+#11514=ADVANCED_FACE('',(#11515),#11522,.F.);+#11515=FACE_BOUND('',#11516,.F.);+#11516=EDGE_LOOP('',(#11517,#6381,#11520,#11521));+#11517=ORIENTED_EDGE('',*,*,#11518,.T.);+#11518=EDGE_CURVE('',#6311,#6378,#11519,.T.);+#11519=LINE('',#6312,#58);+#11520=ORIENTED_EDGE('',*,*,#11508,.F.);+#11521=ORIENTED_EDGE('',*,*,#6315,.F.);+#11522=CYLINDRICAL_SURFACE('',#6319,0.1);+#11523=ADVANCED_FACE('',(#11524),#11531,.F.);+#11524=FACE_BOUND('',#11525,.F.);+#11525=EDGE_LOOP('',(#11526,#6376,#11529,#11530));+#11526=ORIENTED_EDGE('',*,*,#11527,.T.);+#11527=EDGE_CURVE('',#6306,#6373,#11528,.T.);+#11528=LINE('',#6307,#58);+#11529=ORIENTED_EDGE('',*,*,#11518,.F.);+#11530=ORIENTED_EDGE('',*,*,#6310,.F.);+#11531=PLANE('',#11532);+#11532=AXIS2_PLACEMENT_3D('',#6307,#2450,#73);+#11533=ADVANCED_FACE('',(#11534),#11541,.F.);+#11534=FACE_BOUND('',#11535,.F.);+#11535=EDGE_LOOP('',(#11536,#6371,#11539,#11540));+#11536=ORIENTED_EDGE('',*,*,#11537,.T.);+#11537=EDGE_CURVE('',#6301,#6368,#11538,.T.);+#11538=LINE('',#6302,#58);+#11539=ORIENTED_EDGE('',*,*,#11527,.F.);+#11540=ORIENTED_EDGE('',*,*,#6305,.F.);+#11541=PLANE('',#11542);+#11542=AXIS2_PLACEMENT_3D('',#6302,#73,#13);+#11543=ADVANCED_FACE('',(#11544),#11551,.F.);+#11544=FACE_BOUND('',#11545,.F.);+#11545=EDGE_LOOP('',(#11546,#6366,#11549,#11550));+#11546=ORIENTED_EDGE('',*,*,#11547,.T.);+#11547=EDGE_CURVE('',#6294,#6361,#11548,.T.);+#11548=LINE('',#6295,#58);+#11549=ORIENTED_EDGE('',*,*,#11537,.F.);+#11550=ORIENTED_EDGE('',*,*,#6300,.F.);+#11551=PLANE('',#11552);+#11552=AXIS2_PLACEMENT_3D('',#6295,#13,#28);+#11553=ADVANCED_FACE('',(#11554),#11561,.T.);+#11554=FACE_BOUND('',#11555,.F.);+#11555=EDGE_LOOP('',(#11556,#6359,#11559,#11560));+#11556=ORIENTED_EDGE('',*,*,#11557,.T.);+#11557=EDGE_CURVE('',#6289,#6356,#11558,.T.);+#11558=LINE('',#6290,#58);+#11559=ORIENTED_EDGE('',*,*,#11547,.F.);+#11560=ORIENTED_EDGE('',*,*,#6293,.F.);+#11561=CYLINDRICAL_SURFACE('',#11562,0.2);+#11562=AXIS2_PLACEMENT_3D('',#6298,#87,#6022);+#11563=ADVANCED_FACE('',(#11564),#11569,.F.);+#11564=FACE_BOUND('',#11565,.F.);+#11565=EDGE_LOOP('',(#11566,#6354,#11567,#11568));+#11566=ORIENTED_EDGE('',*,*,#6347,.T.);+#11567=ORIENTED_EDGE('',*,*,#11557,.F.);+#11568=ORIENTED_EDGE('',*,*,#6288,.F.);+#11569=PLANE('',#11570);+#11570=AXIS2_PLACEMENT_3D('',#6283,#11416,#6014);+#11571=ADVANCED_FACE('',(#11572),#11579,.T.);+#11572=FACE_BOUND('',#11573,.F.);+#11573=EDGE_LOOP('',(#11574,#6532,#11577,#11578));+#11574=ORIENTED_EDGE('',*,*,#11575,.T.);+#11575=EDGE_CURVE('',#6462,#6529,#11576,.T.);+#11576=LINE('',#6463,#58);+#11577=ORIENTED_EDGE('',*,*,#9391,.F.);+#11578=ORIENTED_EDGE('',*,*,#6466,.F.);+#11579=CYLINDRICAL_SURFACE('',#11580,0.2);+#11580=AXIS2_PLACEMENT_3D('',#6426,#87,#6056);+#11581=ADVANCED_FACE('',(#11582),#11589,.F.);+#11582=FACE_BOUND('',#11583,.F.);+#11583=EDGE_LOOP('',(#11584,#6527,#11587,#11588));+#11584=ORIENTED_EDGE('',*,*,#11585,.T.);+#11585=EDGE_CURVE('',#6456,#6523,#11586,.T.);+#11586=LINE('',#6457,#58);+#11587=ORIENTED_EDGE('',*,*,#11575,.F.);+#11588=ORIENTED_EDGE('',*,*,#6461,.F.);+#11589=PLANE('',#11590);+#11590=AXIS2_PLACEMENT_3D('',#6457,#11358,#6051);+#11591=ADVANCED_FACE('',(#11592),#11599,.F.);+#11592=FACE_BOUND('',#11593,.F.);+#11593=EDGE_LOOP('',(#11594,#6521,#11597,#11598));+#11594=ORIENTED_EDGE('',*,*,#11595,.T.);+#11595=EDGE_CURVE('',#6451,#6518,#11596,.T.);+#11596=LINE('',#6452,#58);+#11597=ORIENTED_EDGE('',*,*,#11585,.F.);+#11598=ORIENTED_EDGE('',*,*,#6455,.F.);+#11599=CYLINDRICAL_SURFACE('',#6459,0.1);+#11600=ADVANCED_FACE('',(#11601),#11608,.F.);+#11601=FACE_BOUND('',#11602,.F.);+#11602=EDGE_LOOP('',(#11603,#6516,#11606,#11607));+#11603=ORIENTED_EDGE('',*,*,#11604,.T.);+#11604=EDGE_CURVE('',#6446,#6513,#11605,.T.);+#11605=LINE('',#6447,#58);+#11606=ORIENTED_EDGE('',*,*,#11595,.F.);+#11607=ORIENTED_EDGE('',*,*,#6450,.F.);+#11608=PLANE('',#11609);+#11609=AXIS2_PLACEMENT_3D('',#6447,#2450,#73);+#11610=ADVANCED_FACE('',(#11611),#11618,.F.);+#11611=FACE_BOUND('',#11612,.F.);+#11612=EDGE_LOOP('',(#11613,#6511,#11616,#11617));+#11613=ORIENTED_EDGE('',*,*,#11614,.T.);+#11614=EDGE_CURVE('',#6441,#6508,#11615,.T.);+#11615=LINE('',#6442,#58);+#11616=ORIENTED_EDGE('',*,*,#11604,.F.);+#11617=ORIENTED_EDGE('',*,*,#6445,.F.);+#11618=PLANE('',#11619);+#11619=AXIS2_PLACEMENT_3D('',#6442,#73,#13);+#11620=ADVANCED_FACE('',(#11621),#11628,.F.);+#11621=FACE_BOUND('',#11622,.F.);+#11622=EDGE_LOOP('',(#11623,#6506,#11626,#11627));+#11623=ORIENTED_EDGE('',*,*,#11624,.T.);+#11624=EDGE_CURVE('',#6434,#6501,#11625,.T.);+#11625=LINE('',#6435,#58);+#11626=ORIENTED_EDGE('',*,*,#11614,.F.);+#11627=ORIENTED_EDGE('',*,*,#6440,.F.);+#11628=PLANE('',#11629);+#11629=AXIS2_PLACEMENT_3D('',#6435,#13,#28);+#11630=ADVANCED_FACE('',(#11631),#11638,.T.);+#11631=FACE_BOUND('',#11632,.F.);+#11632=EDGE_LOOP('',(#11633,#6499,#11636,#11637));+#11633=ORIENTED_EDGE('',*,*,#11634,.T.);+#11634=EDGE_CURVE('',#6429,#6496,#11635,.T.);+#11635=LINE('',#6430,#58);+#11636=ORIENTED_EDGE('',*,*,#11624,.F.);+#11637=ORIENTED_EDGE('',*,*,#6433,.F.);+#11638=CYLINDRICAL_SURFACE('',#11639,0.2);+#11639=AXIS2_PLACEMENT_3D('',#6438,#87,#6022);+#11640=ADVANCED_FACE('',(#11641),#11646,.F.);+#11641=FACE_BOUND('',#11642,.F.);+#11642=EDGE_LOOP('',(#11643,#6494,#11644,#11645));+#11643=ORIENTED_EDGE('',*,*,#6487,.T.);+#11644=ORIENTED_EDGE('',*,*,#11634,.F.);+#11645=ORIENTED_EDGE('',*,*,#6428,.F.);+#11646=PLANE('',#11647);+#11647=AXIS2_PLACEMENT_3D('',#6423,#11416,#6014);+#11648=ADVANCED_FACE('',(#11649),#11656,.T.);+#11649=FACE_BOUND('',#11650,.F.);+#11650=EDGE_LOOP('',(#11651,#6672,#11654,#11655));+#11651=ORIENTED_EDGE('',*,*,#11652,.T.);+#11652=EDGE_CURVE('',#6602,#6669,#11653,.T.);+#11653=LINE('',#6603,#58);+#11654=ORIENTED_EDGE('',*,*,#9403,.F.);+#11655=ORIENTED_EDGE('',*,*,#6606,.F.);+#11656=CYLINDRICAL_SURFACE('',#11657,0.2);+#11657=AXIS2_PLACEMENT_3D('',#6566,#87,#6056);+#11658=ADVANCED_FACE('',(#11659),#11666,.F.);+#11659=FACE_BOUND('',#11660,.F.);+#11660=EDGE_LOOP('',(#11661,#6667,#11664,#11665));+#11661=ORIENTED_EDGE('',*,*,#11662,.T.);+#11662=EDGE_CURVE('',#6596,#6663,#11663,.T.);+#11663=LINE('',#6597,#58);+#11664=ORIENTED_EDGE('',*,*,#11652,.F.);+#11665=ORIENTED_EDGE('',*,*,#6601,.F.);+#11666=PLANE('',#11667);+#11667=AXIS2_PLACEMENT_3D('',#6597,#11358,#6051);+#11668=ADVANCED_FACE('',(#11669),#11676,.F.);+#11669=FACE_BOUND('',#11670,.F.);+#11670=EDGE_LOOP('',(#11671,#6661,#11674,#11675));+#11671=ORIENTED_EDGE('',*,*,#11672,.T.);+#11672=EDGE_CURVE('',#6591,#6658,#11673,.T.);+#11673=LINE('',#6592,#58);+#11674=ORIENTED_EDGE('',*,*,#11662,.F.);+#11675=ORIENTED_EDGE('',*,*,#6595,.F.);+#11676=CYLINDRICAL_SURFACE('',#6599,0.1);+#11677=ADVANCED_FACE('',(#11678),#11685,.F.);+#11678=FACE_BOUND('',#11679,.F.);+#11679=EDGE_LOOP('',(#11680,#6656,#11683,#11684));+#11680=ORIENTED_EDGE('',*,*,#11681,.T.);+#11681=EDGE_CURVE('',#6586,#6653,#11682,.T.);+#11682=LINE('',#6587,#58);+#11683=ORIENTED_EDGE('',*,*,#11672,.F.);+#11684=ORIENTED_EDGE('',*,*,#6590,.F.);+#11685=PLANE('',#11686);+#11686=AXIS2_PLACEMENT_3D('',#6587,#2450,#73);+#11687=ADVANCED_FACE('',(#11688),#11695,.F.);+#11688=FACE_BOUND('',#11689,.F.);+#11689=EDGE_LOOP('',(#11690,#6651,#11693,#11694));+#11690=ORIENTED_EDGE('',*,*,#11691,.T.);+#11691=EDGE_CURVE('',#6581,#6648,#11692,.T.);+#11692=LINE('',#6582,#58);+#11693=ORIENTED_EDGE('',*,*,#11681,.F.);+#11694=ORIENTED_EDGE('',*,*,#6585,.F.);+#11695=PLANE('',#11696);+#11696=AXIS2_PLACEMENT_3D('',#6582,#73,#13);+#11697=ADVANCED_FACE('',(#11698),#11705,.F.);+#11698=FACE_BOUND('',#11699,.F.);+#11699=EDGE_LOOP('',(#11700,#6646,#11703,#11704));+#11700=ORIENTED_EDGE('',*,*,#11701,.T.);+#11701=EDGE_CURVE('',#6574,#6641,#11702,.T.);+#11702=LINE('',#6575,#58);+#11703=ORIENTED_EDGE('',*,*,#11691,.F.);+#11704=ORIENTED_EDGE('',*,*,#6580,.F.);+#11705=PLANE('',#11706);+#11706=AXIS2_PLACEMENT_3D('',#6575,#13,#28);+#11707=ADVANCED_FACE('',(#11708),#11715,.T.);+#11708=FACE_BOUND('',#11709,.F.);+#11709=EDGE_LOOP('',(#11710,#6639,#11713,#11714));+#11710=ORIENTED_EDGE('',*,*,#11711,.T.);+#11711=EDGE_CURVE('',#6569,#6636,#11712,.T.);+#11712=LINE('',#6570,#58);+#11713=ORIENTED_EDGE('',*,*,#11701,.F.);+#11714=ORIENTED_EDGE('',*,*,#6573,.F.);+#11715=CYLINDRICAL_SURFACE('',#11716,0.2);+#11716=AXIS2_PLACEMENT_3D('',#6578,#87,#6022);+#11717=ADVANCED_FACE('',(#11718),#11723,.F.);+#11718=FACE_BOUND('',#11719,.F.);+#11719=EDGE_LOOP('',(#11720,#6634,#11721,#11722));+#11720=ORIENTED_EDGE('',*,*,#6627,.T.);+#11721=ORIENTED_EDGE('',*,*,#11711,.F.);+#11722=ORIENTED_EDGE('',*,*,#6568,.F.);+#11723=PLANE('',#11724);+#11724=AXIS2_PLACEMENT_3D('',#6563,#11416,#6014);+#11725=ADVANCED_FACE('',(#11726),#11733,.T.);+#11726=FACE_BOUND('',#11727,.F.);+#11727=EDGE_LOOP('',(#11728,#6812,#11731,#11732));+#11728=ORIENTED_EDGE('',*,*,#11729,.T.);+#11729=EDGE_CURVE('',#6742,#6809,#11730,.T.);+#11730=LINE('',#6743,#58);+#11731=ORIENTED_EDGE('',*,*,#9415,.F.);+#11732=ORIENTED_EDGE('',*,*,#6746,.F.);+#11733=CYLINDRICAL_SURFACE('',#11734,0.2);+#11734=AXIS2_PLACEMENT_3D('',#6706,#87,#6056);+#11735=ADVANCED_FACE('',(#11736),#11743,.F.);+#11736=FACE_BOUND('',#11737,.F.);+#11737=EDGE_LOOP('',(#11738,#6807,#11741,#11742));+#11738=ORIENTED_EDGE('',*,*,#11739,.T.);+#11739=EDGE_CURVE('',#6736,#6803,#11740,.T.);+#11740=LINE('',#6737,#58);+#11741=ORIENTED_EDGE('',*,*,#11729,.F.);+#11742=ORIENTED_EDGE('',*,*,#6741,.F.);+#11743=PLANE('',#11744);+#11744=AXIS2_PLACEMENT_3D('',#6737,#11358,#6051);+#11745=ADVANCED_FACE('',(#11746),#11753,.F.);+#11746=FACE_BOUND('',#11747,.F.);+#11747=EDGE_LOOP('',(#11748,#6801,#11751,#11752));+#11748=ORIENTED_EDGE('',*,*,#11749,.T.);+#11749=EDGE_CURVE('',#6731,#6798,#11750,.T.);+#11750=LINE('',#6732,#58);+#11751=ORIENTED_EDGE('',*,*,#11739,.F.);+#11752=ORIENTED_EDGE('',*,*,#6735,.F.);+#11753=CYLINDRICAL_SURFACE('',#6739,0.1);+#11754=ADVANCED_FACE('',(#11755),#11762,.F.);+#11755=FACE_BOUND('',#11756,.F.);+#11756=EDGE_LOOP('',(#11757,#6796,#11760,#11761));+#11757=ORIENTED_EDGE('',*,*,#11758,.T.);+#11758=EDGE_CURVE('',#6726,#6793,#11759,.T.);+#11759=LINE('',#6727,#58);+#11760=ORIENTED_EDGE('',*,*,#11749,.F.);+#11761=ORIENTED_EDGE('',*,*,#6730,.F.);+#11762=PLANE('',#11763);+#11763=AXIS2_PLACEMENT_3D('',#6727,#2450,#73);+#11764=ADVANCED_FACE('',(#11765),#11772,.F.);+#11765=FACE_BOUND('',#11766,.F.);+#11766=EDGE_LOOP('',(#11767,#6791,#11770,#11771));+#11767=ORIENTED_EDGE('',*,*,#11768,.T.);+#11768=EDGE_CURVE('',#6721,#6788,#11769,.T.);+#11769=LINE('',#6722,#58);+#11770=ORIENTED_EDGE('',*,*,#11758,.F.);+#11771=ORIENTED_EDGE('',*,*,#6725,.F.);+#11772=PLANE('',#11773);+#11773=AXIS2_PLACEMENT_3D('',#6722,#73,#13);+#11774=ADVANCED_FACE('',(#11775),#11782,.F.);+#11775=FACE_BOUND('',#11776,.F.);+#11776=EDGE_LOOP('',(#11777,#6786,#11780,#11781));+#11777=ORIENTED_EDGE('',*,*,#11778,.T.);+#11778=EDGE_CURVE('',#6714,#6781,#11779,.T.);+#11779=LINE('',#6715,#58);+#11780=ORIENTED_EDGE('',*,*,#11768,.F.);+#11781=ORIENTED_EDGE('',*,*,#6720,.F.);+#11782=PLANE('',#11783);+#11783=AXIS2_PLACEMENT_3D('',#6715,#13,#28);+#11784=ADVANCED_FACE('',(#11785),#11792,.T.);+#11785=FACE_BOUND('',#11786,.F.);+#11786=EDGE_LOOP('',(#11787,#6779,#11790,#11791));+#11787=ORIENTED_EDGE('',*,*,#11788,.T.);+#11788=EDGE_CURVE('',#6709,#6776,#11789,.T.);+#11789=LINE('',#6710,#58);+#11790=ORIENTED_EDGE('',*,*,#11778,.F.);+#11791=ORIENTED_EDGE('',*,*,#6713,.F.);+#11792=CYLINDRICAL_SURFACE('',#11793,0.2);+#11793=AXIS2_PLACEMENT_3D('',#6718,#87,#6022);+#11794=ADVANCED_FACE('',(#11795),#11800,.F.);+#11795=FACE_BOUND('',#11796,.F.);+#11796=EDGE_LOOP('',(#11797,#6774,#11798,#11799));+#11797=ORIENTED_EDGE('',*,*,#6767,.T.);+#11798=ORIENTED_EDGE('',*,*,#11788,.F.);+#11799=ORIENTED_EDGE('',*,*,#6708,.F.);+#11800=PLANE('',#11801);+#11801=AXIS2_PLACEMENT_3D('',#6703,#11416,#6014);+#11802=ADVANCED_FACE('',(#11803),#11810,.T.);+#11803=FACE_BOUND('',#11804,.F.);+#11804=EDGE_LOOP('',(#11805,#6952,#11808,#11809));+#11805=ORIENTED_EDGE('',*,*,#11806,.T.);+#11806=EDGE_CURVE('',#6882,#6949,#11807,.T.);+#11807=LINE('',#6883,#58);+#11808=ORIENTED_EDGE('',*,*,#9427,.F.);+#11809=ORIENTED_EDGE('',*,*,#6886,.F.);+#11810=CYLINDRICAL_SURFACE('',#11811,0.2);+#11811=AXIS2_PLACEMENT_3D('',#6846,#87,#6056);+#11812=ADVANCED_FACE('',(#11813),#11820,.F.);+#11813=FACE_BOUND('',#11814,.F.);+#11814=EDGE_LOOP('',(#11815,#6947,#11818,#11819));+#11815=ORIENTED_EDGE('',*,*,#11816,.T.);+#11816=EDGE_CURVE('',#6876,#6943,#11817,.T.);+#11817=LINE('',#6877,#58);+#11818=ORIENTED_EDGE('',*,*,#11806,.F.);+#11819=ORIENTED_EDGE('',*,*,#6881,.F.);+#11820=PLANE('',#11821);+#11821=AXIS2_PLACEMENT_3D('',#6877,#11358,#6051);+#11822=ADVANCED_FACE('',(#11823),#11830,.F.);+#11823=FACE_BOUND('',#11824,.F.);+#11824=EDGE_LOOP('',(#11825,#6941,#11828,#11829));+#11825=ORIENTED_EDGE('',*,*,#11826,.T.);+#11826=EDGE_CURVE('',#6871,#6938,#11827,.T.);+#11827=LINE('',#6872,#58);+#11828=ORIENTED_EDGE('',*,*,#11816,.F.);+#11829=ORIENTED_EDGE('',*,*,#6875,.F.);+#11830=CYLINDRICAL_SURFACE('',#6879,0.1);+#11831=ADVANCED_FACE('',(#11832),#11839,.F.);+#11832=FACE_BOUND('',#11833,.F.);+#11833=EDGE_LOOP('',(#11834,#6936,#11837,#11838));+#11834=ORIENTED_EDGE('',*,*,#11835,.T.);+#11835=EDGE_CURVE('',#6866,#6933,#11836,.T.);+#11836=LINE('',#6867,#58);+#11837=ORIENTED_EDGE('',*,*,#11826,.F.);+#11838=ORIENTED_EDGE('',*,*,#6870,.F.);+#11839=PLANE('',#11840);+#11840=AXIS2_PLACEMENT_3D('',#6867,#2450,#73);+#11841=ADVANCED_FACE('',(#11842),#11849,.F.);+#11842=FACE_BOUND('',#11843,.F.);+#11843=EDGE_LOOP('',(#11844,#6931,#11847,#11848));+#11844=ORIENTED_EDGE('',*,*,#11845,.T.);+#11845=EDGE_CURVE('',#6861,#6928,#11846,.T.);+#11846=LINE('',#6862,#58);+#11847=ORIENTED_EDGE('',*,*,#11835,.F.);+#11848=ORIENTED_EDGE('',*,*,#6865,.F.);+#11849=PLANE('',#11850);+#11850=AXIS2_PLACEMENT_3D('',#6862,#73,#13);+#11851=ADVANCED_FACE('',(#11852),#11859,.F.);+#11852=FACE_BOUND('',#11853,.F.);+#11853=EDGE_LOOP('',(#11854,#6926,#11857,#11858));+#11854=ORIENTED_EDGE('',*,*,#11855,.T.);+#11855=EDGE_CURVE('',#6854,#6921,#11856,.T.);+#11856=LINE('',#6855,#58);+#11857=ORIENTED_EDGE('',*,*,#11845,.F.);+#11858=ORIENTED_EDGE('',*,*,#6860,.F.);+#11859=PLANE('',#11860);+#11860=AXIS2_PLACEMENT_3D('',#6855,#13,#28);+#11861=ADVANCED_FACE('',(#11862),#11869,.T.);+#11862=FACE_BOUND('',#11863,.F.);+#11863=EDGE_LOOP('',(#11864,#6919,#11867,#11868));+#11864=ORIENTED_EDGE('',*,*,#11865,.T.);+#11865=EDGE_CURVE('',#6849,#6916,#11866,.T.);+#11866=LINE('',#6850,#58);+#11867=ORIENTED_EDGE('',*,*,#11855,.F.);+#11868=ORIENTED_EDGE('',*,*,#6853,.F.);+#11869=CYLINDRICAL_SURFACE('',#11870,0.2);+#11870=AXIS2_PLACEMENT_3D('',#6858,#87,#6022);+#11871=ADVANCED_FACE('',(#11872),#11877,.F.);+#11872=FACE_BOUND('',#11873,.F.);+#11873=EDGE_LOOP('',(#11874,#6914,#11875,#11876));+#11874=ORIENTED_EDGE('',*,*,#6907,.T.);+#11875=ORIENTED_EDGE('',*,*,#11865,.F.);+#11876=ORIENTED_EDGE('',*,*,#6848,.F.);+#11877=PLANE('',#11878);+#11878=AXIS2_PLACEMENT_3D('',#6843,#11416,#6014);+#11879=ADVANCED_FACE('',(#11880),#11887,.T.);+#11880=FACE_BOUND('',#11881,.F.);+#11881=EDGE_LOOP('',(#11882,#7092,#11885,#11886));+#11882=ORIENTED_EDGE('',*,*,#11883,.T.);+#11883=EDGE_CURVE('',#7022,#7089,#11884,.T.);+#11884=LINE('',#7023,#58);+#11885=ORIENTED_EDGE('',*,*,#9439,.F.);+#11886=ORIENTED_EDGE('',*,*,#7026,.F.);+#11887=CYLINDRICAL_SURFACE('',#11888,0.2);+#11888=AXIS2_PLACEMENT_3D('',#6986,#87,#6056);+#11889=ADVANCED_FACE('',(#11890),#11897,.F.);+#11890=FACE_BOUND('',#11891,.F.);+#11891=EDGE_LOOP('',(#11892,#7087,#11895,#11896));+#11892=ORIENTED_EDGE('',*,*,#11893,.T.);+#11893=EDGE_CURVE('',#7016,#7083,#11894,.T.);+#11894=LINE('',#7017,#58);+#11895=ORIENTED_EDGE('',*,*,#11883,.F.);+#11896=ORIENTED_EDGE('',*,*,#7021,.F.);+#11897=PLANE('',#11898);+#11898=AXIS2_PLACEMENT_3D('',#7017,#11358,#6051);+#11899=ADVANCED_FACE('',(#11900),#11907,.F.);+#11900=FACE_BOUND('',#11901,.F.);+#11901=EDGE_LOOP('',(#11902,#7081,#11905,#11906));+#11902=ORIENTED_EDGE('',*,*,#11903,.T.);+#11903=EDGE_CURVE('',#7011,#7078,#11904,.T.);+#11904=LINE('',#7012,#58);+#11905=ORIENTED_EDGE('',*,*,#11893,.F.);+#11906=ORIENTED_EDGE('',*,*,#7015,.F.);+#11907=CYLINDRICAL_SURFACE('',#7019,0.1);+#11908=ADVANCED_FACE('',(#11909),#11916,.F.);+#11909=FACE_BOUND('',#11910,.F.);+#11910=EDGE_LOOP('',(#11911,#7076,#11914,#11915));+#11911=ORIENTED_EDGE('',*,*,#11912,.T.);+#11912=EDGE_CURVE('',#7006,#7073,#11913,.T.);+#11913=LINE('',#7007,#58);+#11914=ORIENTED_EDGE('',*,*,#11903,.F.);+#11915=ORIENTED_EDGE('',*,*,#7010,.F.);+#11916=PLANE('',#11917);+#11917=AXIS2_PLACEMENT_3D('',#7007,#2450,#73);+#11918=ADVANCED_FACE('',(#11919),#11926,.F.);+#11919=FACE_BOUND('',#11920,.F.);+#11920=EDGE_LOOP('',(#11921,#7071,#11924,#11925));+#11921=ORIENTED_EDGE('',*,*,#11922,.T.);+#11922=EDGE_CURVE('',#7001,#7068,#11923,.T.);+#11923=LINE('',#7002,#58);+#11924=ORIENTED_EDGE('',*,*,#11912,.F.);+#11925=ORIENTED_EDGE('',*,*,#7005,.F.);+#11926=PLANE('',#11927);+#11927=AXIS2_PLACEMENT_3D('',#7002,#73,#13);+#11928=ADVANCED_FACE('',(#11929),#11936,.F.);+#11929=FACE_BOUND('',#11930,.F.);+#11930=EDGE_LOOP('',(#11931,#7066,#11934,#11935));+#11931=ORIENTED_EDGE('',*,*,#11932,.T.);+#11932=EDGE_CURVE('',#6994,#7061,#11933,.T.);+#11933=LINE('',#6995,#58);+#11934=ORIENTED_EDGE('',*,*,#11922,.F.);+#11935=ORIENTED_EDGE('',*,*,#7000,.F.);+#11936=PLANE('',#11937);+#11937=AXIS2_PLACEMENT_3D('',#6995,#13,#28);+#11938=ADVANCED_FACE('',(#11939),#11946,.T.);+#11939=FACE_BOUND('',#11940,.F.);+#11940=EDGE_LOOP('',(#11941,#7059,#11944,#11945));+#11941=ORIENTED_EDGE('',*,*,#11942,.T.);+#11942=EDGE_CURVE('',#6989,#7056,#11943,.T.);+#11943=LINE('',#6990,#58);+#11944=ORIENTED_EDGE('',*,*,#11932,.F.);+#11945=ORIENTED_EDGE('',*,*,#6993,.F.);+#11946=CYLINDRICAL_SURFACE('',#11947,0.2);+#11947=AXIS2_PLACEMENT_3D('',#6998,#87,#6022);+#11948=ADVANCED_FACE('',(#11949),#11954,.F.);+#11949=FACE_BOUND('',#11950,.F.);+#11950=EDGE_LOOP('',(#11951,#7054,#11952,#11953));+#11951=ORIENTED_EDGE('',*,*,#7047,.T.);+#11952=ORIENTED_EDGE('',*,*,#11942,.F.);+#11953=ORIENTED_EDGE('',*,*,#6988,.F.);+#11954=PLANE('',#11955);+#11955=AXIS2_PLACEMENT_3D('',#6983,#11416,#6014);+#11956=ADVANCED_FACE('',(#11957),#11964,.T.);+#11957=FACE_BOUND('',#11958,.F.);+#11958=EDGE_LOOP('',(#11959,#7232,#11962,#11963));+#11959=ORIENTED_EDGE('',*,*,#11960,.T.);+#11960=EDGE_CURVE('',#7162,#7229,#11961,.T.);+#11961=LINE('',#7163,#58);+#11962=ORIENTED_EDGE('',*,*,#9451,.F.);+#11963=ORIENTED_EDGE('',*,*,#7166,.F.);+#11964=CYLINDRICAL_SURFACE('',#11965,0.2);+#11965=AXIS2_PLACEMENT_3D('',#7126,#87,#6056);+#11966=ADVANCED_FACE('',(#11967),#11974,.F.);+#11967=FACE_BOUND('',#11968,.F.);+#11968=EDGE_LOOP('',(#11969,#7227,#11972,#11973));+#11969=ORIENTED_EDGE('',*,*,#11970,.T.);+#11970=EDGE_CURVE('',#7156,#7223,#11971,.T.);+#11971=LINE('',#7157,#58);+#11972=ORIENTED_EDGE('',*,*,#11960,.F.);+#11973=ORIENTED_EDGE('',*,*,#7161,.F.);+#11974=PLANE('',#11975);+#11975=AXIS2_PLACEMENT_3D('',#7157,#11358,#6051);+#11976=ADVANCED_FACE('',(#11977),#11984,.F.);+#11977=FACE_BOUND('',#11978,.F.);+#11978=EDGE_LOOP('',(#11979,#7221,#11982,#11983));+#11979=ORIENTED_EDGE('',*,*,#11980,.T.);+#11980=EDGE_CURVE('',#7151,#7218,#11981,.T.);+#11981=LINE('',#7152,#58);+#11982=ORIENTED_EDGE('',*,*,#11970,.F.);+#11983=ORIENTED_EDGE('',*,*,#7155,.F.);+#11984=CYLINDRICAL_SURFACE('',#7159,0.1);+#11985=ADVANCED_FACE('',(#11986),#11993,.F.);+#11986=FACE_BOUND('',#11987,.F.);+#11987=EDGE_LOOP('',(#11988,#7216,#11991,#11992));+#11988=ORIENTED_EDGE('',*,*,#11989,.T.);+#11989=EDGE_CURVE('',#7146,#7213,#11990,.T.);+#11990=LINE('',#7147,#58);+#11991=ORIENTED_EDGE('',*,*,#11980,.F.);+#11992=ORIENTED_EDGE('',*,*,#7150,.F.);+#11993=PLANE('',#11994);+#11994=AXIS2_PLACEMENT_3D('',#7147,#2450,#73);+#11995=ADVANCED_FACE('',(#11996),#12003,.F.);+#11996=FACE_BOUND('',#11997,.F.);+#11997=EDGE_LOOP('',(#11998,#7211,#12001,#12002));+#11998=ORIENTED_EDGE('',*,*,#11999,.T.);+#11999=EDGE_CURVE('',#7141,#7208,#12000,.T.);+#12000=LINE('',#7142,#58);+#12001=ORIENTED_EDGE('',*,*,#11989,.F.);+#12002=ORIENTED_EDGE('',*,*,#7145,.F.);+#12003=PLANE('',#12004);+#12004=AXIS2_PLACEMENT_3D('',#7142,#73,#13);+#12005=ADVANCED_FACE('',(#12006),#12013,.F.);+#12006=FACE_BOUND('',#12007,.F.);+#12007=EDGE_LOOP('',(#12008,#7206,#12011,#12012));+#12008=ORIENTED_EDGE('',*,*,#12009,.T.);+#12009=EDGE_CURVE('',#7134,#7201,#12010,.T.);+#12010=LINE('',#7135,#58);+#12011=ORIENTED_EDGE('',*,*,#11999,.F.);+#12012=ORIENTED_EDGE('',*,*,#7140,.F.);+#12013=PLANE('',#12014);+#12014=AXIS2_PLACEMENT_3D('',#7135,#13,#28);+#12015=ADVANCED_FACE('',(#12016),#12023,.T.);+#12016=FACE_BOUND('',#12017,.F.);+#12017=EDGE_LOOP('',(#12018,#7199,#12021,#12022));+#12018=ORIENTED_EDGE('',*,*,#12019,.T.);+#12019=EDGE_CURVE('',#7129,#7196,#12020,.T.);+#12020=LINE('',#7130,#58);+#12021=ORIENTED_EDGE('',*,*,#12009,.F.);+#12022=ORIENTED_EDGE('',*,*,#7133,.F.);+#12023=CYLINDRICAL_SURFACE('',#12024,0.2);+#12024=AXIS2_PLACEMENT_3D('',#7138,#87,#6022);+#12025=ADVANCED_FACE('',(#12026),#12031,.F.);+#12026=FACE_BOUND('',#12027,.F.);+#12027=EDGE_LOOP('',(#12028,#7194,#12029,#12030));+#12028=ORIENTED_EDGE('',*,*,#7187,.T.);+#12029=ORIENTED_EDGE('',*,*,#12019,.F.);+#12030=ORIENTED_EDGE('',*,*,#7128,.F.);+#12031=PLANE('',#12032);+#12032=AXIS2_PLACEMENT_3D('',#7123,#11416,#6014);+#12033=ADVANCED_FACE('',(#12034),#12041,.T.);+#12034=FACE_BOUND('',#12035,.F.);+#12035=EDGE_LOOP('',(#12036,#7372,#12039,#12040));+#12036=ORIENTED_EDGE('',*,*,#12037,.T.);+#12037=EDGE_CURVE('',#7302,#7369,#12038,.T.);+#12038=LINE('',#7303,#58);+#12039=ORIENTED_EDGE('',*,*,#9463,.F.);+#12040=ORIENTED_EDGE('',*,*,#7306,.F.);+#12041=CYLINDRICAL_SURFACE('',#12042,0.2);+#12042=AXIS2_PLACEMENT_3D('',#7266,#87,#6056);+#12043=ADVANCED_FACE('',(#12044),#12051,.F.);+#12044=FACE_BOUND('',#12045,.F.);+#12045=EDGE_LOOP('',(#12046,#7367,#12049,#12050));+#12046=ORIENTED_EDGE('',*,*,#12047,.T.);+#12047=EDGE_CURVE('',#7296,#7363,#12048,.T.);+#12048=LINE('',#7297,#58);+#12049=ORIENTED_EDGE('',*,*,#12037,.F.);+#12050=ORIENTED_EDGE('',*,*,#7301,.F.);+#12051=PLANE('',#12052);+#12052=AXIS2_PLACEMENT_3D('',#7297,#11358,#6051);+#12053=ADVANCED_FACE('',(#12054),#12061,.F.);+#12054=FACE_BOUND('',#12055,.F.);+#12055=EDGE_LOOP('',(#12056,#7361,#12059,#12060));+#12056=ORIENTED_EDGE('',*,*,#12057,.T.);+#12057=EDGE_CURVE('',#7291,#7358,#12058,.T.);+#12058=LINE('',#7292,#58);+#12059=ORIENTED_EDGE('',*,*,#12047,.F.);+#12060=ORIENTED_EDGE('',*,*,#7295,.F.);+#12061=CYLINDRICAL_SURFACE('',#7299,0.1);+#12062=ADVANCED_FACE('',(#12063),#12070,.F.);+#12063=FACE_BOUND('',#12064,.F.);+#12064=EDGE_LOOP('',(#12065,#7356,#12068,#12069));+#12065=ORIENTED_EDGE('',*,*,#12066,.T.);+#12066=EDGE_CURVE('',#7286,#7353,#12067,.T.);+#12067=LINE('',#7287,#58);+#12068=ORIENTED_EDGE('',*,*,#12057,.F.);+#12069=ORIENTED_EDGE('',*,*,#7290,.F.);+#12070=PLANE('',#12071);+#12071=AXIS2_PLACEMENT_3D('',#7287,#2450,#73);+#12072=ADVANCED_FACE('',(#12073),#12080,.F.);+#12073=FACE_BOUND('',#12074,.F.);+#12074=EDGE_LOOP('',(#12075,#7351,#12078,#12079));+#12075=ORIENTED_EDGE('',*,*,#12076,.T.);+#12076=EDGE_CURVE('',#7281,#7348,#12077,.T.);+#12077=LINE('',#7282,#58);+#12078=ORIENTED_EDGE('',*,*,#12066,.F.);+#12079=ORIENTED_EDGE('',*,*,#7285,.F.);+#12080=PLANE('',#12081);+#12081=AXIS2_PLACEMENT_3D('',#7282,#73,#13);+#12082=ADVANCED_FACE('',(#12083),#12090,.F.);+#12083=FACE_BOUND('',#12084,.F.);+#12084=EDGE_LOOP('',(#12085,#7346,#12088,#12089));+#12085=ORIENTED_EDGE('',*,*,#12086,.T.);+#12086=EDGE_CURVE('',#7274,#7341,#12087,.T.);+#12087=LINE('',#7275,#58);+#12088=ORIENTED_EDGE('',*,*,#12076,.F.);+#12089=ORIENTED_EDGE('',*,*,#7280,.F.);+#12090=PLANE('',#12091);+#12091=AXIS2_PLACEMENT_3D('',#7275,#13,#28);+#12092=ADVANCED_FACE('',(#12093),#12100,.T.);+#12093=FACE_BOUND('',#12094,.F.);+#12094=EDGE_LOOP('',(#12095,#7339,#12098,#12099));+#12095=ORIENTED_EDGE('',*,*,#12096,.T.);+#12096=EDGE_CURVE('',#7269,#7336,#12097,.T.);+#12097=LINE('',#7270,#58);+#12098=ORIENTED_EDGE('',*,*,#12086,.F.);+#12099=ORIENTED_EDGE('',*,*,#7273,.F.);+#12100=CYLINDRICAL_SURFACE('',#12101,0.2);+#12101=AXIS2_PLACEMENT_3D('',#7278,#87,#6022);+#12102=ADVANCED_FACE('',(#12103),#12108,.F.);+#12103=FACE_BOUND('',#12104,.F.);+#12104=EDGE_LOOP('',(#12105,#7334,#12106,#12107));+#12105=ORIENTED_EDGE('',*,*,#7327,.T.);+#12106=ORIENTED_EDGE('',*,*,#12096,.F.);+#12107=ORIENTED_EDGE('',*,*,#7268,.F.);+#12108=PLANE('',#12109);+#12109=AXIS2_PLACEMENT_3D('',#7263,#11416,#6014);+#12110=ADVANCED_FACE('',(#12111),#12118,.T.);+#12111=FACE_BOUND('',#12112,.F.);+#12112=EDGE_LOOP('',(#12113,#7512,#12116,#12117));+#12113=ORIENTED_EDGE('',*,*,#12114,.T.);+#12114=EDGE_CURVE('',#7442,#7509,#12115,.T.);+#12115=LINE('',#7443,#58);+#12116=ORIENTED_EDGE('',*,*,#9475,.F.);+#12117=ORIENTED_EDGE('',*,*,#7446,.F.);+#12118=CYLINDRICAL_SURFACE('',#12119,0.2);+#12119=AXIS2_PLACEMENT_3D('',#7406,#87,#6056);+#12120=ADVANCED_FACE('',(#12121),#12128,.F.);+#12121=FACE_BOUND('',#12122,.F.);+#12122=EDGE_LOOP('',(#12123,#7507,#12126,#12127));+#12123=ORIENTED_EDGE('',*,*,#12124,.T.);+#12124=EDGE_CURVE('',#7436,#7503,#12125,.T.);+#12125=LINE('',#7437,#58);+#12126=ORIENTED_EDGE('',*,*,#12114,.F.);+#12127=ORIENTED_EDGE('',*,*,#7441,.F.);+#12128=PLANE('',#12129);+#12129=AXIS2_PLACEMENT_3D('',#7437,#11358,#6051);+#12130=ADVANCED_FACE('',(#12131),#12138,.F.);+#12131=FACE_BOUND('',#12132,.F.);+#12132=EDGE_LOOP('',(#12133,#7501,#12136,#12137));+#12133=ORIENTED_EDGE('',*,*,#12134,.T.);+#12134=EDGE_CURVE('',#7431,#7498,#12135,.T.);+#12135=LINE('',#7432,#58);+#12136=ORIENTED_EDGE('',*,*,#12124,.F.);+#12137=ORIENTED_EDGE('',*,*,#7435,.F.);+#12138=CYLINDRICAL_SURFACE('',#7439,0.1);+#12139=ADVANCED_FACE('',(#12140),#12147,.F.);+#12140=FACE_BOUND('',#12141,.F.);+#12141=EDGE_LOOP('',(#12142,#7496,#12145,#12146));+#12142=ORIENTED_EDGE('',*,*,#12143,.T.);+#12143=EDGE_CURVE('',#7426,#7493,#12144,.T.);+#12144=LINE('',#7427,#58);+#12145=ORIENTED_EDGE('',*,*,#12134,.F.);+#12146=ORIENTED_EDGE('',*,*,#7430,.F.);+#12147=PLANE('',#12148);+#12148=AXIS2_PLACEMENT_3D('',#7427,#2450,#73);+#12149=ADVANCED_FACE('',(#12150),#12157,.F.);+#12150=FACE_BOUND('',#12151,.F.);+#12151=EDGE_LOOP('',(#12152,#7491,#12155,#12156));+#12152=ORIENTED_EDGE('',*,*,#12153,.T.);+#12153=EDGE_CURVE('',#7421,#7488,#12154,.T.);+#12154=LINE('',#7422,#58);+#12155=ORIENTED_EDGE('',*,*,#12143,.F.);+#12156=ORIENTED_EDGE('',*,*,#7425,.F.);+#12157=PLANE('',#12158);+#12158=AXIS2_PLACEMENT_3D('',#7422,#73,#13);+#12159=ADVANCED_FACE('',(#12160),#12167,.F.);+#12160=FACE_BOUND('',#12161,.F.);+#12161=EDGE_LOOP('',(#12162,#7486,#12165,#12166));+#12162=ORIENTED_EDGE('',*,*,#12163,.T.);+#12163=EDGE_CURVE('',#7414,#7481,#12164,.T.);+#12164=LINE('',#7415,#58);+#12165=ORIENTED_EDGE('',*,*,#12153,.F.);+#12166=ORIENTED_EDGE('',*,*,#7420,.F.);+#12167=PLANE('',#12168);+#12168=AXIS2_PLACEMENT_3D('',#7415,#13,#28);+#12169=ADVANCED_FACE('',(#12170),#12177,.T.);+#12170=FACE_BOUND('',#12171,.F.);+#12171=EDGE_LOOP('',(#12172,#7479,#12175,#12176));+#12172=ORIENTED_EDGE('',*,*,#12173,.T.);+#12173=EDGE_CURVE('',#7409,#7476,#12174,.T.);+#12174=LINE('',#7410,#58);+#12175=ORIENTED_EDGE('',*,*,#12163,.F.);+#12176=ORIENTED_EDGE('',*,*,#7413,.F.);+#12177=CYLINDRICAL_SURFACE('',#12178,0.2);+#12178=AXIS2_PLACEMENT_3D('',#7418,#87,#6022);+#12179=ADVANCED_FACE('',(#12180),#12185,.F.);+#12180=FACE_BOUND('',#12181,.F.);+#12181=EDGE_LOOP('',(#12182,#7474,#12183,#12184));+#12182=ORIENTED_EDGE('',*,*,#7467,.T.);+#12183=ORIENTED_EDGE('',*,*,#12173,.F.);+#12184=ORIENTED_EDGE('',*,*,#7408,.F.);+#12185=PLANE('',#12186);+#12186=AXIS2_PLACEMENT_3D('',#7403,#11416,#6014);+#12187=ADVANCED_FACE('',(#12188),#12195,.T.);+#12188=FACE_BOUND('',#12189,.F.);+#12189=EDGE_LOOP('',(#12190,#7652,#12193,#12194));+#12190=ORIENTED_EDGE('',*,*,#12191,.T.);+#12191=EDGE_CURVE('',#7582,#7649,#12192,.T.);+#12192=LINE('',#7583,#58);+#12193=ORIENTED_EDGE('',*,*,#9487,.F.);+#12194=ORIENTED_EDGE('',*,*,#7586,.F.);+#12195=CYLINDRICAL_SURFACE('',#12196,0.2);+#12196=AXIS2_PLACEMENT_3D('',#7546,#87,#6056);+#12197=ADVANCED_FACE('',(#12198),#12205,.F.);+#12198=FACE_BOUND('',#12199,.F.);+#12199=EDGE_LOOP('',(#12200,#7647,#12203,#12204));+#12200=ORIENTED_EDGE('',*,*,#12201,.T.);+#12201=EDGE_CURVE('',#7576,#7643,#12202,.T.);+#12202=LINE('',#7577,#58);+#12203=ORIENTED_EDGE('',*,*,#12191,.F.);+#12204=ORIENTED_EDGE('',*,*,#7581,.F.);+#12205=PLANE('',#12206);+#12206=AXIS2_PLACEMENT_3D('',#7577,#11358,#6051);+#12207=ADVANCED_FACE('',(#12208),#12215,.F.);+#12208=FACE_BOUND('',#12209,.F.);+#12209=EDGE_LOOP('',(#12210,#7641,#12213,#12214));+#12210=ORIENTED_EDGE('',*,*,#12211,.T.);+#12211=EDGE_CURVE('',#7571,#7638,#12212,.T.);+#12212=LINE('',#7572,#58);+#12213=ORIENTED_EDGE('',*,*,#12201,.F.);+#12214=ORIENTED_EDGE('',*,*,#7575,.F.);+#12215=CYLINDRICAL_SURFACE('',#7579,0.1);+#12216=ADVANCED_FACE('',(#12217),#12224,.F.);+#12217=FACE_BOUND('',#12218,.F.);+#12218=EDGE_LOOP('',(#12219,#7636,#12222,#12223));+#12219=ORIENTED_EDGE('',*,*,#12220,.T.);+#12220=EDGE_CURVE('',#7566,#7633,#12221,.T.);+#12221=LINE('',#7567,#58);+#12222=ORIENTED_EDGE('',*,*,#12211,.F.);+#12223=ORIENTED_EDGE('',*,*,#7570,.F.);+#12224=PLANE('',#12225);+#12225=AXIS2_PLACEMENT_3D('',#7567,#2450,#73);+#12226=ADVANCED_FACE('',(#12227),#12234,.F.);+#12227=FACE_BOUND('',#12228,.F.);+#12228=EDGE_LOOP('',(#12229,#7631,#12232,#12233));+#12229=ORIENTED_EDGE('',*,*,#12230,.T.);+#12230=EDGE_CURVE('',#7561,#7628,#12231,.T.);+#12231=LINE('',#7562,#58);+#12232=ORIENTED_EDGE('',*,*,#12220,.F.);+#12233=ORIENTED_EDGE('',*,*,#7565,.F.);+#12234=PLANE('',#12235);+#12235=AXIS2_PLACEMENT_3D('',#7562,#73,#13);+#12236=ADVANCED_FACE('',(#12237),#12244,.F.);+#12237=FACE_BOUND('',#12238,.F.);+#12238=EDGE_LOOP('',(#12239,#7626,#12242,#12243));+#12239=ORIENTED_EDGE('',*,*,#12240,.T.);+#12240=EDGE_CURVE('',#7554,#7621,#12241,.T.);+#12241=LINE('',#7555,#58);+#12242=ORIENTED_EDGE('',*,*,#12230,.F.);+#12243=ORIENTED_EDGE('',*,*,#7560,.F.);+#12244=PLANE('',#12245);+#12245=AXIS2_PLACEMENT_3D('',#7555,#13,#28);+#12246=ADVANCED_FACE('',(#12247),#12254,.T.);+#12247=FACE_BOUND('',#12248,.F.);+#12248=EDGE_LOOP('',(#12249,#7619,#12252,#12253));+#12249=ORIENTED_EDGE('',*,*,#12250,.T.);+#12250=EDGE_CURVE('',#7549,#7616,#12251,.T.);+#12251=LINE('',#7550,#58);+#12252=ORIENTED_EDGE('',*,*,#12240,.F.);+#12253=ORIENTED_EDGE('',*,*,#7553,.F.);+#12254=CYLINDRICAL_SURFACE('',#12255,0.2);+#12255=AXIS2_PLACEMENT_3D('',#7558,#87,#6022);+#12256=ADVANCED_FACE('',(#12257),#12262,.F.);+#12257=FACE_BOUND('',#12258,.F.);+#12258=EDGE_LOOP('',(#12259,#7614,#12260,#12261));+#12259=ORIENTED_EDGE('',*,*,#7607,.T.);+#12260=ORIENTED_EDGE('',*,*,#12250,.F.);+#12261=ORIENTED_EDGE('',*,*,#7548,.F.);+#12262=PLANE('',#12263);+#12263=AXIS2_PLACEMENT_3D('',#7543,#11416,#6014);+#12264=ADVANCED_FACE('',(#12265),#12272,.T.);+#12265=FACE_BOUND('',#12266,.F.);+#12266=EDGE_LOOP('',(#12267,#7792,#12270,#12271));+#12267=ORIENTED_EDGE('',*,*,#12268,.T.);+#12268=EDGE_CURVE('',#7722,#7789,#12269,.T.);+#12269=LINE('',#7723,#58);+#12270=ORIENTED_EDGE('',*,*,#9499,.F.);+#12271=ORIENTED_EDGE('',*,*,#7726,.F.);+#12272=CYLINDRICAL_SURFACE('',#12273,0.2);+#12273=AXIS2_PLACEMENT_3D('',#7686,#87,#6056);+#12274=ADVANCED_FACE('',(#12275),#12282,.F.);+#12275=FACE_BOUND('',#12276,.F.);+#12276=EDGE_LOOP('',(#12277,#7787,#12280,#12281));+#12277=ORIENTED_EDGE('',*,*,#12278,.T.);+#12278=EDGE_CURVE('',#7716,#7783,#12279,.T.);+#12279=LINE('',#7717,#58);+#12280=ORIENTED_EDGE('',*,*,#12268,.F.);+#12281=ORIENTED_EDGE('',*,*,#7721,.F.);+#12282=PLANE('',#12283);+#12283=AXIS2_PLACEMENT_3D('',#7717,#11358,#6051);+#12284=ADVANCED_FACE('',(#12285),#12292,.F.);+#12285=FACE_BOUND('',#12286,.F.);+#12286=EDGE_LOOP('',(#12287,#7781,#12290,#12291));+#12287=ORIENTED_EDGE('',*,*,#12288,.T.);+#12288=EDGE_CURVE('',#7711,#7778,#12289,.T.);+#12289=LINE('',#7712,#58);+#12290=ORIENTED_EDGE('',*,*,#12278,.F.);+#12291=ORIENTED_EDGE('',*,*,#7715,.F.);+#12292=CYLINDRICAL_SURFACE('',#7719,0.1);+#12293=ADVANCED_FACE('',(#12294),#12301,.F.);+#12294=FACE_BOUND('',#12295,.F.);+#12295=EDGE_LOOP('',(#12296,#7776,#12299,#12300));+#12296=ORIENTED_EDGE('',*,*,#12297,.T.);+#12297=EDGE_CURVE('',#7706,#7773,#12298,.T.);+#12298=LINE('',#7707,#58);+#12299=ORIENTED_EDGE('',*,*,#12288,.F.);+#12300=ORIENTED_EDGE('',*,*,#7710,.F.);+#12301=PLANE('',#12302);+#12302=AXIS2_PLACEMENT_3D('',#7707,#2450,#73);+#12303=ADVANCED_FACE('',(#12304),#12311,.F.);+#12304=FACE_BOUND('',#12305,.F.);+#12305=EDGE_LOOP('',(#12306,#7771,#12309,#12310));+#12306=ORIENTED_EDGE('',*,*,#12307,.T.);+#12307=EDGE_CURVE('',#7701,#7768,#12308,.T.);+#12308=LINE('',#7702,#58);+#12309=ORIENTED_EDGE('',*,*,#12297,.F.);+#12310=ORIENTED_EDGE('',*,*,#7705,.F.);+#12311=PLANE('',#12312);+#12312=AXIS2_PLACEMENT_3D('',#7702,#73,#13);+#12313=ADVANCED_FACE('',(#12314),#12321,.F.);+#12314=FACE_BOUND('',#12315,.F.);+#12315=EDGE_LOOP('',(#12316,#7766,#12319,#12320));+#12316=ORIENTED_EDGE('',*,*,#12317,.T.);+#12317=EDGE_CURVE('',#7694,#7761,#12318,.T.);+#12318=LINE('',#7695,#58);+#12319=ORIENTED_EDGE('',*,*,#12307,.F.);+#12320=ORIENTED_EDGE('',*,*,#7700,.F.);+#12321=PLANE('',#12322);+#12322=AXIS2_PLACEMENT_3D('',#7695,#13,#28);+#12323=ADVANCED_FACE('',(#12324),#12331,.T.);+#12324=FACE_BOUND('',#12325,.F.);+#12325=EDGE_LOOP('',(#12326,#7759,#12329,#12330));+#12326=ORIENTED_EDGE('',*,*,#12327,.T.);+#12327=EDGE_CURVE('',#7689,#7756,#12328,.T.);+#12328=LINE('',#7690,#58);+#12329=ORIENTED_EDGE('',*,*,#12317,.F.);+#12330=ORIENTED_EDGE('',*,*,#7693,.F.);+#12331=CYLINDRICAL_SURFACE('',#12332,0.2);+#12332=AXIS2_PLACEMENT_3D('',#7698,#87,#6022);+#12333=ADVANCED_FACE('',(#12334),#12339,.F.);+#12334=FACE_BOUND('',#12335,.F.);+#12335=EDGE_LOOP('',(#12336,#7754,#12337,#12338));+#12336=ORIENTED_EDGE('',*,*,#7747,.T.);+#12337=ORIENTED_EDGE('',*,*,#12327,.F.);+#12338=ORIENTED_EDGE('',*,*,#7688,.F.);+#12339=PLANE('',#12340);+#12340=AXIS2_PLACEMENT_3D('',#7683,#11416,#6014);+#12341=ADVANCED_FACE('',(#12342),#12349,.T.);+#12342=FACE_BOUND('',#12343,.F.);+#12343=EDGE_LOOP('',(#12344,#7932,#12347,#12348));+#12344=ORIENTED_EDGE('',*,*,#12345,.T.);+#12345=EDGE_CURVE('',#7862,#7929,#12346,.T.);+#12346=LINE('',#7863,#58);+#12347=ORIENTED_EDGE('',*,*,#9511,.F.);+#12348=ORIENTED_EDGE('',*,*,#7866,.F.);+#12349=CYLINDRICAL_SURFACE('',#12350,0.2);+#12350=AXIS2_PLACEMENT_3D('',#7826,#87,#6056);+#12351=ADVANCED_FACE('',(#12352),#12359,.F.);+#12352=FACE_BOUND('',#12353,.F.);+#12353=EDGE_LOOP('',(#12354,#7927,#12357,#12358));+#12354=ORIENTED_EDGE('',*,*,#12355,.T.);+#12355=EDGE_CURVE('',#7856,#7923,#12356,.T.);+#12356=LINE('',#7857,#58);+#12357=ORIENTED_EDGE('',*,*,#12345,.F.);+#12358=ORIENTED_EDGE('',*,*,#7861,.F.);+#12359=PLANE('',#12360);+#12360=AXIS2_PLACEMENT_3D('',#7857,#11358,#6051);+#12361=ADVANCED_FACE('',(#12362),#12369,.F.);+#12362=FACE_BOUND('',#12363,.F.);+#12363=EDGE_LOOP('',(#12364,#7921,#12367,#12368));+#12364=ORIENTED_EDGE('',*,*,#12365,.T.);+#12365=EDGE_CURVE('',#7851,#7918,#12366,.T.);+#12366=LINE('',#7852,#58);+#12367=ORIENTED_EDGE('',*,*,#12355,.F.);+#12368=ORIENTED_EDGE('',*,*,#7855,.F.);+#12369=CYLINDRICAL_SURFACE('',#7859,0.1);+#12370=ADVANCED_FACE('',(#12371),#12378,.F.);+#12371=FACE_BOUND('',#12372,.F.);+#12372=EDGE_LOOP('',(#12373,#7916,#12376,#12377));+#12373=ORIENTED_EDGE('',*,*,#12374,.T.);+#12374=EDGE_CURVE('',#7846,#7913,#12375,.T.);+#12375=LINE('',#7847,#58);+#12376=ORIENTED_EDGE('',*,*,#12365,.F.);+#12377=ORIENTED_EDGE('',*,*,#7850,.F.);+#12378=PLANE('',#12379);+#12379=AXIS2_PLACEMENT_3D('',#7847,#2450,#73);+#12380=ADVANCED_FACE('',(#12381),#12388,.F.);+#12381=FACE_BOUND('',#12382,.F.);+#12382=EDGE_LOOP('',(#12383,#7911,#12386,#12387));+#12383=ORIENTED_EDGE('',*,*,#12384,.T.);+#12384=EDGE_CURVE('',#7841,#7908,#12385,.T.);+#12385=LINE('',#7842,#58);+#12386=ORIENTED_EDGE('',*,*,#12374,.F.);+#12387=ORIENTED_EDGE('',*,*,#7845,.F.);+#12388=PLANE('',#12389);+#12389=AXIS2_PLACEMENT_3D('',#7842,#73,#13);+#12390=ADVANCED_FACE('',(#12391),#12398,.F.);+#12391=FACE_BOUND('',#12392,.F.);+#12392=EDGE_LOOP('',(#12393,#7906,#12396,#12397));+#12393=ORIENTED_EDGE('',*,*,#12394,.T.);+#12394=EDGE_CURVE('',#7834,#7901,#12395,.T.);+#12395=LINE('',#7835,#58);+#12396=ORIENTED_EDGE('',*,*,#12384,.F.);+#12397=ORIENTED_EDGE('',*,*,#7840,.F.);+#12398=PLANE('',#12399);+#12399=AXIS2_PLACEMENT_3D('',#7835,#13,#28);+#12400=ADVANCED_FACE('',(#12401),#12408,.T.);+#12401=FACE_BOUND('',#12402,.F.);+#12402=EDGE_LOOP('',(#12403,#7899,#12406,#12407));+#12403=ORIENTED_EDGE('',*,*,#12404,.T.);+#12404=EDGE_CURVE('',#7829,#7896,#12405,.T.);+#12405=LINE('',#7830,#58);+#12406=ORIENTED_EDGE('',*,*,#12394,.F.);+#12407=ORIENTED_EDGE('',*,*,#7833,.F.);+#12408=CYLINDRICAL_SURFACE('',#12409,0.2);+#12409=AXIS2_PLACEMENT_3D('',#7838,#87,#6022);+#12410=ADVANCED_FACE('',(#12411),#12416,.F.);+#12411=FACE_BOUND('',#12412,.F.);+#12412=EDGE_LOOP('',(#12413,#7894,#12414,#12415));+#12413=ORIENTED_EDGE('',*,*,#7887,.T.);+#12414=ORIENTED_EDGE('',*,*,#12404,.F.);+#12415=ORIENTED_EDGE('',*,*,#7828,.F.);+#12416=PLANE('',#12417);+#12417=AXIS2_PLACEMENT_3D('',#7823,#11416,#6014);+#12418=ADVANCED_FACE('',(#12419),#12426,.T.);+#12419=FACE_BOUND('',#12420,.F.);+#12420=EDGE_LOOP('',(#12421,#8072,#12424,#12425));+#12421=ORIENTED_EDGE('',*,*,#12422,.T.);+#12422=EDGE_CURVE('',#8002,#8069,#12423,.T.);+#12423=LINE('',#8003,#58);+#12424=ORIENTED_EDGE('',*,*,#9523,.F.);+#12425=ORIENTED_EDGE('',*,*,#8006,.F.);+#12426=CYLINDRICAL_SURFACE('',#12427,0.2);+#12427=AXIS2_PLACEMENT_3D('',#7966,#87,#6056);+#12428=ADVANCED_FACE('',(#12429),#12436,.F.);+#12429=FACE_BOUND('',#12430,.F.);+#12430=EDGE_LOOP('',(#12431,#8067,#12434,#12435));+#12431=ORIENTED_EDGE('',*,*,#12432,.T.);+#12432=EDGE_CURVE('',#7996,#8063,#12433,.T.);+#12433=LINE('',#7997,#58);+#12434=ORIENTED_EDGE('',*,*,#12422,.F.);+#12435=ORIENTED_EDGE('',*,*,#8001,.F.);+#12436=PLANE('',#12437);+#12437=AXIS2_PLACEMENT_3D('',#7997,#11358,#6051);+#12438=ADVANCED_FACE('',(#12439),#12446,.F.);+#12439=FACE_BOUND('',#12440,.F.);+#12440=EDGE_LOOP('',(#12441,#8061,#12444,#12445));+#12441=ORIENTED_EDGE('',*,*,#12442,.T.);+#12442=EDGE_CURVE('',#7991,#8058,#12443,.T.);+#12443=LINE('',#7992,#58);+#12444=ORIENTED_EDGE('',*,*,#12432,.F.);+#12445=ORIENTED_EDGE('',*,*,#7995,.F.);+#12446=CYLINDRICAL_SURFACE('',#7999,0.1);+#12447=ADVANCED_FACE('',(#12448),#12455,.F.);+#12448=FACE_BOUND('',#12449,.F.);+#12449=EDGE_LOOP('',(#12450,#8056,#12453,#12454));+#12450=ORIENTED_EDGE('',*,*,#12451,.T.);+#12451=EDGE_CURVE('',#7986,#8053,#12452,.T.);+#12452=LINE('',#7987,#58);+#12453=ORIENTED_EDGE('',*,*,#12442,.F.);+#12454=ORIENTED_EDGE('',*,*,#7990,.F.);+#12455=PLANE('',#12456);+#12456=AXIS2_PLACEMENT_3D('',#7987,#2450,#73);+#12457=ADVANCED_FACE('',(#12458),#12465,.F.);+#12458=FACE_BOUND('',#12459,.F.);+#12459=EDGE_LOOP('',(#12460,#8051,#12463,#12464));+#12460=ORIENTED_EDGE('',*,*,#12461,.T.);+#12461=EDGE_CURVE('',#7981,#8048,#12462,.T.);+#12462=LINE('',#7982,#58);+#12463=ORIENTED_EDGE('',*,*,#12451,.F.);+#12464=ORIENTED_EDGE('',*,*,#7985,.F.);+#12465=PLANE('',#12466);+#12466=AXIS2_PLACEMENT_3D('',#7982,#73,#13);+#12467=ADVANCED_FACE('',(#12468),#12475,.F.);+#12468=FACE_BOUND('',#12469,.F.);+#12469=EDGE_LOOP('',(#12470,#8046,#12473,#12474));+#12470=ORIENTED_EDGE('',*,*,#12471,.T.);+#12471=EDGE_CURVE('',#7974,#8041,#12472,.T.);+#12472=LINE('',#7975,#58);+#12473=ORIENTED_EDGE('',*,*,#12461,.F.);+#12474=ORIENTED_EDGE('',*,*,#7980,.F.);+#12475=PLANE('',#12476);+#12476=AXIS2_PLACEMENT_3D('',#7975,#13,#28);+#12477=ADVANCED_FACE('',(#12478),#12485,.T.);+#12478=FACE_BOUND('',#12479,.F.);+#12479=EDGE_LOOP('',(#12480,#8039,#12483,#12484));+#12480=ORIENTED_EDGE('',*,*,#12481,.T.);+#12481=EDGE_CURVE('',#7969,#8036,#12482,.T.);+#12482=LINE('',#7970,#58);+#12483=ORIENTED_EDGE('',*,*,#12471,.F.);+#12484=ORIENTED_EDGE('',*,*,#7973,.F.);+#12485=CYLINDRICAL_SURFACE('',#12486,0.2);+#12486=AXIS2_PLACEMENT_3D('',#7978,#87,#6022);+#12487=ADVANCED_FACE('',(#12488),#12493,.F.);+#12488=FACE_BOUND('',#12489,.F.);+#12489=EDGE_LOOP('',(#12490,#8034,#12491,#12492));+#12490=ORIENTED_EDGE('',*,*,#8027,.T.);+#12491=ORIENTED_EDGE('',*,*,#12481,.F.);+#12492=ORIENTED_EDGE('',*,*,#7968,.F.);+#12493=PLANE('',#12494);+#12494=AXIS2_PLACEMENT_3D('',#7963,#11416,#6014);+#12495=ADVANCED_FACE('',(#12496),#12503,.T.);+#12496=FACE_BOUND('',#12497,.F.);+#12497=EDGE_LOOP('',(#12498,#8212,#12501,#12502));+#12498=ORIENTED_EDGE('',*,*,#12499,.T.);+#12499=EDGE_CURVE('',#8142,#8209,#12500,.T.);+#12500=LINE('',#8143,#58);+#12501=ORIENTED_EDGE('',*,*,#9535,.F.);+#12502=ORIENTED_EDGE('',*,*,#8146,.F.);+#12503=CYLINDRICAL_SURFACE('',#12504,0.2);+#12504=AXIS2_PLACEMENT_3D('',#8106,#87,#6056);+#12505=ADVANCED_FACE('',(#12506),#12513,.F.);+#12506=FACE_BOUND('',#12507,.F.);+#12507=EDGE_LOOP('',(#12508,#8207,#12511,#12512));+#12508=ORIENTED_EDGE('',*,*,#12509,.T.);+#12509=EDGE_CURVE('',#8136,#8203,#12510,.T.);+#12510=LINE('',#8137,#58);+#12511=ORIENTED_EDGE('',*,*,#12499,.F.);+#12512=ORIENTED_EDGE('',*,*,#8141,.F.);+#12513=PLANE('',#12514);+#12514=AXIS2_PLACEMENT_3D('',#8137,#11358,#6051);+#12515=ADVANCED_FACE('',(#12516),#12523,.F.);+#12516=FACE_BOUND('',#12517,.F.);+#12517=EDGE_LOOP('',(#12518,#8201,#12521,#12522));+#12518=ORIENTED_EDGE('',*,*,#12519,.T.);+#12519=EDGE_CURVE('',#8131,#8198,#12520,.T.);+#12520=LINE('',#8132,#58);+#12521=ORIENTED_EDGE('',*,*,#12509,.F.);+#12522=ORIENTED_EDGE('',*,*,#8135,.F.);+#12523=CYLINDRICAL_SURFACE('',#8139,0.1);+#12524=ADVANCED_FACE('',(#12525),#12532,.F.);+#12525=FACE_BOUND('',#12526,.F.);+#12526=EDGE_LOOP('',(#12527,#8196,#12530,#12531));+#12527=ORIENTED_EDGE('',*,*,#12528,.T.);+#12528=EDGE_CURVE('',#8126,#8193,#12529,.T.);+#12529=LINE('',#8127,#58);+#12530=ORIENTED_EDGE('',*,*,#12519,.F.);+#12531=ORIENTED_EDGE('',*,*,#8130,.F.);+#12532=PLANE('',#12533);+#12533=AXIS2_PLACEMENT_3D('',#8127,#2450,#73);+#12534=ADVANCED_FACE('',(#12535),#12542,.F.);+#12535=FACE_BOUND('',#12536,.F.);+#12536=EDGE_LOOP('',(#12537,#8191,#12540,#12541));+#12537=ORIENTED_EDGE('',*,*,#12538,.T.);+#12538=EDGE_CURVE('',#8121,#8188,#12539,.T.);+#12539=LINE('',#8122,#58);+#12540=ORIENTED_EDGE('',*,*,#12528,.F.);+#12541=ORIENTED_EDGE('',*,*,#8125,.F.);+#12542=PLANE('',#12543);+#12543=AXIS2_PLACEMENT_3D('',#8122,#73,#13);+#12544=ADVANCED_FACE('',(#12545),#12552,.F.);+#12545=FACE_BOUND('',#12546,.F.);+#12546=EDGE_LOOP('',(#12547,#8186,#12550,#12551));+#12547=ORIENTED_EDGE('',*,*,#12548,.T.);+#12548=EDGE_CURVE('',#8114,#8181,#12549,.T.);+#12549=LINE('',#8115,#58);+#12550=ORIENTED_EDGE('',*,*,#12538,.F.);+#12551=ORIENTED_EDGE('',*,*,#8120,.F.);+#12552=PLANE('',#12553);+#12553=AXIS2_PLACEMENT_3D('',#8115,#13,#28);+#12554=ADVANCED_FACE('',(#12555),#12562,.T.);+#12555=FACE_BOUND('',#12556,.F.);+#12556=EDGE_LOOP('',(#12557,#8179,#12560,#12561));+#12557=ORIENTED_EDGE('',*,*,#12558,.T.);+#12558=EDGE_CURVE('',#8109,#8176,#12559,.T.);+#12559=LINE('',#8110,#58);+#12560=ORIENTED_EDGE('',*,*,#12548,.F.);+#12561=ORIENTED_EDGE('',*,*,#8113,.F.);+#12562=CYLINDRICAL_SURFACE('',#12563,0.2);+#12563=AXIS2_PLACEMENT_3D('',#8118,#87,#6022);+#12564=ADVANCED_FACE('',(#12565),#12570,.F.);+#12565=FACE_BOUND('',#12566,.F.);+#12566=EDGE_LOOP('',(#12567,#8174,#12568,#12569));+#12567=ORIENTED_EDGE('',*,*,#8167,.T.);+#12568=ORIENTED_EDGE('',*,*,#12558,.F.);+#12569=ORIENTED_EDGE('',*,*,#8108,.F.);+#12570=PLANE('',#12571);+#12571=AXIS2_PLACEMENT_3D('',#8103,#11416,#6014);+#12572=ADVANCED_FACE('',(#12573),#12580,.T.);+#12573=FACE_BOUND('',#12574,.F.);+#12574=EDGE_LOOP('',(#12575,#8352,#12578,#12579));+#12575=ORIENTED_EDGE('',*,*,#12576,.T.);+#12576=EDGE_CURVE('',#8282,#8349,#12577,.T.);+#12577=LINE('',#8283,#58);+#12578=ORIENTED_EDGE('',*,*,#9547,.F.);+#12579=ORIENTED_EDGE('',*,*,#8286,.F.);+#12580=CYLINDRICAL_SURFACE('',#12581,0.2);+#12581=AXIS2_PLACEMENT_3D('',#8246,#87,#6056);+#12582=ADVANCED_FACE('',(#12583),#12590,.F.);+#12583=FACE_BOUND('',#12584,.F.);+#12584=EDGE_LOOP('',(#12585,#8347,#12588,#12589));+#12585=ORIENTED_EDGE('',*,*,#12586,.T.);+#12586=EDGE_CURVE('',#8276,#8343,#12587,.T.);+#12587=LINE('',#8277,#58);+#12588=ORIENTED_EDGE('',*,*,#12576,.F.);+#12589=ORIENTED_EDGE('',*,*,#8281,.F.);+#12590=PLANE('',#12591);+#12591=AXIS2_PLACEMENT_3D('',#8277,#11358,#6051);+#12592=ADVANCED_FACE('',(#12593),#12600,.F.);+#12593=FACE_BOUND('',#12594,.F.);+#12594=EDGE_LOOP('',(#12595,#8341,#12598,#12599));+#12595=ORIENTED_EDGE('',*,*,#12596,.T.);+#12596=EDGE_CURVE('',#8271,#8338,#12597,.T.);+#12597=LINE('',#8272,#58);+#12598=ORIENTED_EDGE('',*,*,#12586,.F.);+#12599=ORIENTED_EDGE('',*,*,#8275,.F.);+#12600=CYLINDRICAL_SURFACE('',#8279,0.1);+#12601=ADVANCED_FACE('',(#12602),#12609,.F.);+#12602=FACE_BOUND('',#12603,.F.);+#12603=EDGE_LOOP('',(#12604,#8336,#12607,#12608));+#12604=ORIENTED_EDGE('',*,*,#12605,.T.);+#12605=EDGE_CURVE('',#8266,#8333,#12606,.T.);+#12606=LINE('',#8267,#58);+#12607=ORIENTED_EDGE('',*,*,#12596,.F.);+#12608=ORIENTED_EDGE('',*,*,#8270,.F.);+#12609=PLANE('',#12610);+#12610=AXIS2_PLACEMENT_3D('',#8267,#2450,#73);+#12611=ADVANCED_FACE('',(#12612),#12619,.F.);+#12612=FACE_BOUND('',#12613,.F.);+#12613=EDGE_LOOP('',(#12614,#8331,#12617,#12618));+#12614=ORIENTED_EDGE('',*,*,#12615,.T.);+#12615=EDGE_CURVE('',#8261,#8328,#12616,.T.);+#12616=LINE('',#8262,#58);+#12617=ORIENTED_EDGE('',*,*,#12605,.F.);+#12618=ORIENTED_EDGE('',*,*,#8265,.F.);+#12619=PLANE('',#12620);+#12620=AXIS2_PLACEMENT_3D('',#8262,#73,#13);+#12621=ADVANCED_FACE('',(#12622),#12629,.F.);+#12622=FACE_BOUND('',#12623,.F.);+#12623=EDGE_LOOP('',(#12624,#8326,#12627,#12628));+#12624=ORIENTED_EDGE('',*,*,#12625,.T.);+#12625=EDGE_CURVE('',#8254,#8321,#12626,.T.);+#12626=LINE('',#8255,#58);+#12627=ORIENTED_EDGE('',*,*,#12615,.F.);+#12628=ORIENTED_EDGE('',*,*,#8260,.F.);+#12629=PLANE('',#12630);+#12630=AXIS2_PLACEMENT_3D('',#8255,#13,#28);+#12631=ADVANCED_FACE('',(#12632),#12639,.T.);+#12632=FACE_BOUND('',#12633,.F.);+#12633=EDGE_LOOP('',(#12634,#8319,#12637,#12638));+#12634=ORIENTED_EDGE('',*,*,#12635,.T.);+#12635=EDGE_CURVE('',#8249,#8316,#12636,.T.);+#12636=LINE('',#8250,#58);+#12637=ORIENTED_EDGE('',*,*,#12625,.F.);+#12638=ORIENTED_EDGE('',*,*,#8253,.F.);+#12639=CYLINDRICAL_SURFACE('',#12640,0.2);+#12640=AXIS2_PLACEMENT_3D('',#8258,#87,#6022);+#12641=ADVANCED_FACE('',(#12642),#12647,.F.);+#12642=FACE_BOUND('',#12643,.F.);+#12643=EDGE_LOOP('',(#12644,#8314,#12645,#12646));+#12644=ORIENTED_EDGE('',*,*,#8307,.T.);+#12645=ORIENTED_EDGE('',*,*,#12635,.F.);+#12646=ORIENTED_EDGE('',*,*,#8248,.F.);+#12647=PLANE('',#12648);+#12648=AXIS2_PLACEMENT_3D('',#8243,#11416,#6014);+#12649=ADVANCED_FACE('',(#12650),#12657,.T.);+#12650=FACE_BOUND('',#12651,.F.);+#12651=EDGE_LOOP('',(#12652,#8492,#12655,#12656));+#12652=ORIENTED_EDGE('',*,*,#12653,.T.);+#12653=EDGE_CURVE('',#8422,#8489,#12654,.T.);+#12654=LINE('',#8423,#58);+#12655=ORIENTED_EDGE('',*,*,#9559,.F.);+#12656=ORIENTED_EDGE('',*,*,#8426,.F.);+#12657=CYLINDRICAL_SURFACE('',#12658,0.2);+#12658=AXIS2_PLACEMENT_3D('',#8386,#87,#6056);+#12659=ADVANCED_FACE('',(#12660),#12667,.F.);+#12660=FACE_BOUND('',#12661,.F.);+#12661=EDGE_LOOP('',(#12662,#8487,#12665,#12666));+#12662=ORIENTED_EDGE('',*,*,#12663,.T.);+#12663=EDGE_CURVE('',#8416,#8483,#12664,.T.);+#12664=LINE('',#8417,#58);+#12665=ORIENTED_EDGE('',*,*,#12653,.F.);+#12666=ORIENTED_EDGE('',*,*,#8421,.F.);+#12667=PLANE('',#12668);+#12668=AXIS2_PLACEMENT_3D('',#8417,#11358,#6051);+#12669=ADVANCED_FACE('',(#12670),#12677,.F.);+#12670=FACE_BOUND('',#12671,.F.);+#12671=EDGE_LOOP('',(#12672,#8481,#12675,#12676));+#12672=ORIENTED_EDGE('',*,*,#12673,.T.);+#12673=EDGE_CURVE('',#8411,#8478,#12674,.T.);+#12674=LINE('',#8412,#58);+#12675=ORIENTED_EDGE('',*,*,#12663,.F.);+#12676=ORIENTED_EDGE('',*,*,#8415,.F.);+#12677=CYLINDRICAL_SURFACE('',#8419,0.1);+#12678=ADVANCED_FACE('',(#12679),#12686,.F.);+#12679=FACE_BOUND('',#12680,.F.);+#12680=EDGE_LOOP('',(#12681,#8476,#12684,#12685));+#12681=ORIENTED_EDGE('',*,*,#12682,.T.);+#12682=EDGE_CURVE('',#8406,#8473,#12683,.T.);+#12683=LINE('',#8407,#58);+#12684=ORIENTED_EDGE('',*,*,#12673,.F.);+#12685=ORIENTED_EDGE('',*,*,#8410,.F.);+#12686=PLANE('',#12687);+#12687=AXIS2_PLACEMENT_3D('',#8407,#2450,#73);+#12688=ADVANCED_FACE('',(#12689),#12696,.F.);+#12689=FACE_BOUND('',#12690,.F.);+#12690=EDGE_LOOP('',(#12691,#8471,#12694,#12695));+#12691=ORIENTED_EDGE('',*,*,#12692,.T.);+#12692=EDGE_CURVE('',#8401,#8468,#12693,.T.);+#12693=LINE('',#8402,#58);+#12694=ORIENTED_EDGE('',*,*,#12682,.F.);+#12695=ORIENTED_EDGE('',*,*,#8405,.F.);+#12696=PLANE('',#12697);+#12697=AXIS2_PLACEMENT_3D('',#8402,#73,#13);+#12698=ADVANCED_FACE('',(#12699),#12706,.F.);+#12699=FACE_BOUND('',#12700,.F.);+#12700=EDGE_LOOP('',(#12701,#8466,#12704,#12705));+#12701=ORIENTED_EDGE('',*,*,#12702,.T.);+#12702=EDGE_CURVE('',#8394,#8461,#12703,.T.);+#12703=LINE('',#8395,#58);+#12704=ORIENTED_EDGE('',*,*,#12692,.F.);+#12705=ORIENTED_EDGE('',*,*,#8400,.F.);+#12706=PLANE('',#12707);+#12707=AXIS2_PLACEMENT_3D('',#8395,#13,#28);+#12708=ADVANCED_FACE('',(#12709),#12716,.T.);+#12709=FACE_BOUND('',#12710,.F.);+#12710=EDGE_LOOP('',(#12711,#8459,#12714,#12715));+#12711=ORIENTED_EDGE('',*,*,#12712,.T.);+#12712=EDGE_CURVE('',#8389,#8456,#12713,.T.);+#12713=LINE('',#8390,#58);+#12714=ORIENTED_EDGE('',*,*,#12702,.F.);+#12715=ORIENTED_EDGE('',*,*,#8393,.F.);+#12716=CYLINDRICAL_SURFACE('',#12717,0.2);+#12717=AXIS2_PLACEMENT_3D('',#8398,#87,#6022);+#12718=ADVANCED_FACE('',(#12719),#12724,.F.);+#12719=FACE_BOUND('',#12720,.F.);+#12720=EDGE_LOOP('',(#12721,#8454,#12722,#12723));+#12721=ORIENTED_EDGE('',*,*,#8447,.T.);+#12722=ORIENTED_EDGE('',*,*,#12712,.F.);+#12723=ORIENTED_EDGE('',*,*,#8388,.F.);+#12724=PLANE('',#12725);+#12725=AXIS2_PLACEMENT_3D('',#8383,#11416,#6014);+#12726=ADVANCED_FACE('',(#12727),#12734,.T.);+#12727=FACE_BOUND('',#12728,.F.);+#12728=EDGE_LOOP('',(#12729,#8632,#12732,#12733));+#12729=ORIENTED_EDGE('',*,*,#12730,.T.);+#12730=EDGE_CURVE('',#8562,#8629,#12731,.T.);+#12731=LINE('',#8563,#58);+#12732=ORIENTED_EDGE('',*,*,#9571,.F.);+#12733=ORIENTED_EDGE('',*,*,#8566,.F.);+#12734=CYLINDRICAL_SURFACE('',#12735,0.2);+#12735=AXIS2_PLACEMENT_3D('',#8526,#87,#6056);+#12736=ADVANCED_FACE('',(#12737),#12744,.F.);+#12737=FACE_BOUND('',#12738,.F.);+#12738=EDGE_LOOP('',(#12739,#8627,#12742,#12743));+#12739=ORIENTED_EDGE('',*,*,#12740,.T.);+#12740=EDGE_CURVE('',#8556,#8623,#12741,.T.);+#12741=LINE('',#8557,#58);+#12742=ORIENTED_EDGE('',*,*,#12730,.F.);+#12743=ORIENTED_EDGE('',*,*,#8561,.F.);+#12744=PLANE('',#12745);+#12745=AXIS2_PLACEMENT_3D('',#8557,#11358,#6051);+#12746=ADVANCED_FACE('',(#12747),#12754,.F.);+#12747=FACE_BOUND('',#12748,.F.);+#12748=EDGE_LOOP('',(#12749,#8621,#12752,#12753));+#12749=ORIENTED_EDGE('',*,*,#12750,.T.);+#12750=EDGE_CURVE('',#8551,#8618,#12751,.T.);+#12751=LINE('',#8552,#58);+#12752=ORIENTED_EDGE('',*,*,#12740,.F.);+#12753=ORIENTED_EDGE('',*,*,#8555,.F.);+#12754=CYLINDRICAL_SURFACE('',#8559,0.1);+#12755=ADVANCED_FACE('',(#12756),#12763,.F.);+#12756=FACE_BOUND('',#12757,.F.);+#12757=EDGE_LOOP('',(#12758,#8616,#12761,#12762));+#12758=ORIENTED_EDGE('',*,*,#12759,.T.);+#12759=EDGE_CURVE('',#8546,#8613,#12760,.T.);+#12760=LINE('',#8547,#58);+#12761=ORIENTED_EDGE('',*,*,#12750,.F.);+#12762=ORIENTED_EDGE('',*,*,#8550,.F.);+#12763=PLANE('',#12764);+#12764=AXIS2_PLACEMENT_3D('',#8547,#2450,#73);+#12765=ADVANCED_FACE('',(#12766),#12773,.F.);+#12766=FACE_BOUND('',#12767,.F.);+#12767=EDGE_LOOP('',(#12768,#8611,#12771,#12772));+#12768=ORIENTED_EDGE('',*,*,#12769,.T.);+#12769=EDGE_CURVE('',#8541,#8608,#12770,.T.);+#12770=LINE('',#8542,#58);+#12771=ORIENTED_EDGE('',*,*,#12759,.F.);+#12772=ORIENTED_EDGE('',*,*,#8545,.F.);+#12773=PLANE('',#12774);+#12774=AXIS2_PLACEMENT_3D('',#8542,#73,#13);+#12775=ADVANCED_FACE('',(#12776),#12783,.F.);+#12776=FACE_BOUND('',#12777,.F.);+#12777=EDGE_LOOP('',(#12778,#8606,#12781,#12782));+#12778=ORIENTED_EDGE('',*,*,#12779,.T.);+#12779=EDGE_CURVE('',#8534,#8601,#12780,.T.);+#12780=LINE('',#8535,#58);+#12781=ORIENTED_EDGE('',*,*,#12769,.F.);+#12782=ORIENTED_EDGE('',*,*,#8540,.F.);+#12783=PLANE('',#12784);+#12784=AXIS2_PLACEMENT_3D('',#8535,#13,#28);+#12785=ADVANCED_FACE('',(#12786),#12793,.T.);+#12786=FACE_BOUND('',#12787,.F.);+#12787=EDGE_LOOP('',(#12788,#8599,#12791,#12792));+#12788=ORIENTED_EDGE('',*,*,#12789,.T.);+#12789=EDGE_CURVE('',#8529,#8596,#12790,.T.);+#12790=LINE('',#8530,#58);+#12791=ORIENTED_EDGE('',*,*,#12779,.F.);+#12792=ORIENTED_EDGE('',*,*,#8533,.F.);+#12793=CYLINDRICAL_SURFACE('',#12794,0.2);+#12794=AXIS2_PLACEMENT_3D('',#8538,#87,#6022);+#12795=ADVANCED_FACE('',(#12796),#12801,.F.);+#12796=FACE_BOUND('',#12797,.F.);+#12797=EDGE_LOOP('',(#12798,#8594,#12799,#12800));+#12798=ORIENTED_EDGE('',*,*,#8587,.T.);+#12799=ORIENTED_EDGE('',*,*,#12789,.F.);+#12800=ORIENTED_EDGE('',*,*,#8528,.F.);+#12801=PLANE('',#12802);+#12802=AXIS2_PLACEMENT_3D('',#8523,#11416,#6014);+#12803=ADVANCED_FACE('',(#12804),#12811,.T.);+#12804=FACE_BOUND('',#12805,.F.);+#12805=EDGE_LOOP('',(#12806,#8772,#12809,#12810));+#12806=ORIENTED_EDGE('',*,*,#12807,.T.);+#12807=EDGE_CURVE('',#8702,#8769,#12808,.T.);+#12808=LINE('',#8703,#58);+#12809=ORIENTED_EDGE('',*,*,#9583,.F.);+#12810=ORIENTED_EDGE('',*,*,#8706,.F.);+#12811=CYLINDRICAL_SURFACE('',#12812,0.2);+#12812=AXIS2_PLACEMENT_3D('',#8666,#87,#6056);+#12813=ADVANCED_FACE('',(#12814),#12821,.F.);+#12814=FACE_BOUND('',#12815,.F.);+#12815=EDGE_LOOP('',(#12816,#8767,#12819,#12820));+#12816=ORIENTED_EDGE('',*,*,#12817,.T.);+#12817=EDGE_CURVE('',#8696,#8763,#12818,.T.);+#12818=LINE('',#8697,#58);+#12819=ORIENTED_EDGE('',*,*,#12807,.F.);+#12820=ORIENTED_EDGE('',*,*,#8701,.F.);+#12821=PLANE('',#12822);+#12822=AXIS2_PLACEMENT_3D('',#8697,#11358,#6051);+#12823=ADVANCED_FACE('',(#12824),#12831,.F.);+#12824=FACE_BOUND('',#12825,.F.);+#12825=EDGE_LOOP('',(#12826,#8761,#12829,#12830));+#12826=ORIENTED_EDGE('',*,*,#12827,.T.);+#12827=EDGE_CURVE('',#8691,#8758,#12828,.T.);+#12828=LINE('',#8692,#58);+#12829=ORIENTED_EDGE('',*,*,#12817,.F.);+#12830=ORIENTED_EDGE('',*,*,#8695,.F.);+#12831=CYLINDRICAL_SURFACE('',#8699,0.1);+#12832=ADVANCED_FACE('',(#12833),#12840,.F.);+#12833=FACE_BOUND('',#12834,.F.);+#12834=EDGE_LOOP('',(#12835,#8756,#12838,#12839));+#12835=ORIENTED_EDGE('',*,*,#12836,.T.);+#12836=EDGE_CURVE('',#8686,#8753,#12837,.T.);+#12837=LINE('',#8687,#58);+#12838=ORIENTED_EDGE('',*,*,#12827,.F.);+#12839=ORIENTED_EDGE('',*,*,#8690,.F.);+#12840=PLANE('',#12841);+#12841=AXIS2_PLACEMENT_3D('',#8687,#2450,#73);+#12842=ADVANCED_FACE('',(#12843),#12850,.F.);+#12843=FACE_BOUND('',#12844,.F.);+#12844=EDGE_LOOP('',(#12845,#8751,#12848,#12849));+#12845=ORIENTED_EDGE('',*,*,#12846,.T.);+#12846=EDGE_CURVE('',#8681,#8748,#12847,.T.);+#12847=LINE('',#8682,#58);+#12848=ORIENTED_EDGE('',*,*,#12836,.F.);+#12849=ORIENTED_EDGE('',*,*,#8685,.F.);+#12850=PLANE('',#12851);+#12851=AXIS2_PLACEMENT_3D('',#8682,#73,#13);+#12852=ADVANCED_FACE('',(#12853),#12860,.F.);+#12853=FACE_BOUND('',#12854,.F.);+#12854=EDGE_LOOP('',(#12855,#8746,#12858,#12859));+#12855=ORIENTED_EDGE('',*,*,#12856,.T.);+#12856=EDGE_CURVE('',#8674,#8741,#12857,.T.);+#12857=LINE('',#8675,#58);+#12858=ORIENTED_EDGE('',*,*,#12846,.F.);+#12859=ORIENTED_EDGE('',*,*,#8680,.F.);+#12860=PLANE('',#12861);+#12861=AXIS2_PLACEMENT_3D('',#8675,#13,#28);+#12862=ADVANCED_FACE('',(#12863),#12870,.T.);+#12863=FACE_BOUND('',#12864,.F.);+#12864=EDGE_LOOP('',(#12865,#8739,#12868,#12869));+#12865=ORIENTED_EDGE('',*,*,#12866,.T.);+#12866=EDGE_CURVE('',#8669,#8736,#12867,.T.);+#12867=LINE('',#8670,#58);+#12868=ORIENTED_EDGE('',*,*,#12856,.F.);+#12869=ORIENTED_EDGE('',*,*,#8673,.F.);+#12870=CYLINDRICAL_SURFACE('',#12871,0.2);+#12871=AXIS2_PLACEMENT_3D('',#8678,#87,#6022);+#12872=ADVANCED_FACE('',(#12873),#12878,.F.);+#12873=FACE_BOUND('',#12874,.F.);+#12874=EDGE_LOOP('',(#12875,#8734,#12876,#12877));+#12875=ORIENTED_EDGE('',*,*,#8727,.T.);+#12876=ORIENTED_EDGE('',*,*,#12866,.F.);+#12877=ORIENTED_EDGE('',*,*,#8668,.F.);+#12878=PLANE('',#12879);+#12879=AXIS2_PLACEMENT_3D('',#8663,#11416,#6014);+#12880=ADVANCED_FACE('',(#12881),#12888,.T.);+#12881=FACE_BOUND('',#12882,.F.);+#12882=EDGE_LOOP('',(#12883,#8912,#12886,#12887));+#12883=ORIENTED_EDGE('',*,*,#12884,.T.);+#12884=EDGE_CURVE('',#8842,#8909,#12885,.T.);+#12885=LINE('',#8843,#58);+#12886=ORIENTED_EDGE('',*,*,#9595,.F.);+#12887=ORIENTED_EDGE('',*,*,#8846,.F.);+#12888=CYLINDRICAL_SURFACE('',#12889,0.2);+#12889=AXIS2_PLACEMENT_3D('',#8806,#87,#6056);+#12890=ADVANCED_FACE('',(#12891),#12898,.F.);+#12891=FACE_BOUND('',#12892,.F.);+#12892=EDGE_LOOP('',(#12893,#8907,#12896,#12897));+#12893=ORIENTED_EDGE('',*,*,#12894,.T.);+#12894=EDGE_CURVE('',#8836,#8903,#12895,.T.);+#12895=LINE('',#8837,#58);+#12896=ORIENTED_EDGE('',*,*,#12884,.F.);+#12897=ORIENTED_EDGE('',*,*,#8841,.F.);+#12898=PLANE('',#12899);+#12899=AXIS2_PLACEMENT_3D('',#8837,#11358,#6051);+#12900=ADVANCED_FACE('',(#12901),#12908,.F.);+#12901=FACE_BOUND('',#12902,.F.);+#12902=EDGE_LOOP('',(#12903,#8901,#12906,#12907));+#12903=ORIENTED_EDGE('',*,*,#12904,.T.);+#12904=EDGE_CURVE('',#8831,#8898,#12905,.T.);+#12905=LINE('',#8832,#58);+#12906=ORIENTED_EDGE('',*,*,#12894,.F.);+#12907=ORIENTED_EDGE('',*,*,#8835,.F.);+#12908=CYLINDRICAL_SURFACE('',#8839,0.1);+#12909=ADVANCED_FACE('',(#12910),#12917,.F.);+#12910=FACE_BOUND('',#12911,.F.);+#12911=EDGE_LOOP('',(#12912,#8896,#12915,#12916));+#12912=ORIENTED_EDGE('',*,*,#12913,.T.);+#12913=EDGE_CURVE('',#8826,#8893,#12914,.T.);+#12914=LINE('',#8827,#58);+#12915=ORIENTED_EDGE('',*,*,#12904,.F.);+#12916=ORIENTED_EDGE('',*,*,#8830,.F.);+#12917=PLANE('',#12918);+#12918=AXIS2_PLACEMENT_3D('',#8827,#2450,#73);+#12919=ADVANCED_FACE('',(#12920),#12927,.F.);+#12920=FACE_BOUND('',#12921,.F.);+#12921=EDGE_LOOP('',(#12922,#8891,#12925,#12926));+#12922=ORIENTED_EDGE('',*,*,#12923,.T.);+#12923=EDGE_CURVE('',#8821,#8888,#12924,.T.);+#12924=LINE('',#8822,#58);+#12925=ORIENTED_EDGE('',*,*,#12913,.F.);+#12926=ORIENTED_EDGE('',*,*,#8825,.F.);+#12927=PLANE('',#12928);+#12928=AXIS2_PLACEMENT_3D('',#8822,#73,#13);+#12929=ADVANCED_FACE('',(#12930),#12937,.F.);+#12930=FACE_BOUND('',#12931,.F.);+#12931=EDGE_LOOP('',(#12932,#8886,#12935,#12936));+#12932=ORIENTED_EDGE('',*,*,#12933,.T.);+#12933=EDGE_CURVE('',#8814,#8881,#12934,.T.);+#12934=LINE('',#8815,#58);+#12935=ORIENTED_EDGE('',*,*,#12923,.F.);+#12936=ORIENTED_EDGE('',*,*,#8820,.F.);+#12937=PLANE('',#12938);+#12938=AXIS2_PLACEMENT_3D('',#8815,#13,#28);+#12939=ADVANCED_FACE('',(#12940),#12947,.T.);+#12940=FACE_BOUND('',#12941,.F.);+#12941=EDGE_LOOP('',(#12942,#8879,#12945,#12946));+#12942=ORIENTED_EDGE('',*,*,#12943,.T.);+#12943=EDGE_CURVE('',#8809,#8876,#12944,.T.);+#12944=LINE('',#8810,#58);+#12945=ORIENTED_EDGE('',*,*,#12933,.F.);+#12946=ORIENTED_EDGE('',*,*,#8813,.F.);+#12947=CYLINDRICAL_SURFACE('',#12948,0.2);+#12948=AXIS2_PLACEMENT_3D('',#8818,#87,#6022);+#12949=ADVANCED_FACE('',(#12950),#12955,.F.);+#12950=FACE_BOUND('',#12951,.F.);+#12951=EDGE_LOOP('',(#12952,#8874,#12953,#12954));+#12952=ORIENTED_EDGE('',*,*,#8867,.T.);+#12953=ORIENTED_EDGE('',*,*,#12943,.F.);+#12954=ORIENTED_EDGE('',*,*,#8808,.F.);+#12955=PLANE('',#12956);+#12956=AXIS2_PLACEMENT_3D('',#8803,#11416,#6014);+#12957=ADVANCED_FACE('',(#12958),#12965,.T.);+#12958=FACE_BOUND('',#12959,.F.);+#12959=EDGE_LOOP('',(#12960,#9052,#12963,#12964));+#12960=ORIENTED_EDGE('',*,*,#12961,.T.);+#12961=EDGE_CURVE('',#8982,#9049,#12962,.T.);+#12962=LINE('',#8983,#58);+#12963=ORIENTED_EDGE('',*,*,#9607,.F.);+#12964=ORIENTED_EDGE('',*,*,#8986,.F.);+#12965=CYLINDRICAL_SURFACE('',#12966,0.2);+#12966=AXIS2_PLACEMENT_3D('',#8946,#87,#6056);+#12967=ADVANCED_FACE('',(#12968),#12975,.F.);+#12968=FACE_BOUND('',#12969,.F.);+#12969=EDGE_LOOP('',(#12970,#9047,#12973,#12974));+#12970=ORIENTED_EDGE('',*,*,#12971,.T.);+#12971=EDGE_CURVE('',#8976,#9043,#12972,.T.);+#12972=LINE('',#8977,#58);+#12973=ORIENTED_EDGE('',*,*,#12961,.F.);+#12974=ORIENTED_EDGE('',*,*,#8981,.F.);+#12975=PLANE('',#12976);+#12976=AXIS2_PLACEMENT_3D('',#8977,#11358,#6051);+#12977=ADVANCED_FACE('',(#12978),#12985,.F.);+#12978=FACE_BOUND('',#12979,.F.);+#12979=EDGE_LOOP('',(#12980,#9041,#12983,#12984));+#12980=ORIENTED_EDGE('',*,*,#12981,.T.);+#12981=EDGE_CURVE('',#8971,#9038,#12982,.T.);+#12982=LINE('',#8972,#58);+#12983=ORIENTED_EDGE('',*,*,#12971,.F.);+#12984=ORIENTED_EDGE('',*,*,#8975,.F.);+#12985=CYLINDRICAL_SURFACE('',#8979,0.1);+#12986=ADVANCED_FACE('',(#12987),#12994,.F.);+#12987=FACE_BOUND('',#12988,.F.);+#12988=EDGE_LOOP('',(#12989,#9036,#12992,#12993));+#12989=ORIENTED_EDGE('',*,*,#12990,.T.);+#12990=EDGE_CURVE('',#8966,#9033,#12991,.T.);+#12991=LINE('',#8967,#58);+#12992=ORIENTED_EDGE('',*,*,#12981,.F.);+#12993=ORIENTED_EDGE('',*,*,#8970,.F.);+#12994=PLANE('',#12995);+#12995=AXIS2_PLACEMENT_3D('',#8967,#2450,#73);+#12996=ADVANCED_FACE('',(#12997),#13004,.F.);+#12997=FACE_BOUND('',#12998,.F.);+#12998=EDGE_LOOP('',(#12999,#9031,#13002,#13003));+#12999=ORIENTED_EDGE('',*,*,#13000,.T.);+#13000=EDGE_CURVE('',#8961,#9028,#13001,.T.);+#13001=LINE('',#8962,#58);+#13002=ORIENTED_EDGE('',*,*,#12990,.F.);+#13003=ORIENTED_EDGE('',*,*,#8965,.F.);+#13004=PLANE('',#13005);+#13005=AXIS2_PLACEMENT_3D('',#8962,#73,#13);+#13006=ADVANCED_FACE('',(#13007),#13014,.F.);+#13007=FACE_BOUND('',#13008,.F.);+#13008=EDGE_LOOP('',(#13009,#9026,#13012,#13013));+#13009=ORIENTED_EDGE('',*,*,#13010,.T.);+#13010=EDGE_CURVE('',#8954,#9021,#13011,.T.);+#13011=LINE('',#8955,#58);+#13012=ORIENTED_EDGE('',*,*,#13000,.F.);+#13013=ORIENTED_EDGE('',*,*,#8960,.F.);+#13014=PLANE('',#13015);+#13015=AXIS2_PLACEMENT_3D('',#8955,#13,#28);+#13016=ADVANCED_FACE('',(#13017),#13024,.T.);+#13017=FACE_BOUND('',#13018,.F.);+#13018=EDGE_LOOP('',(#13019,#9019,#13022,#13023));+#13019=ORIENTED_EDGE('',*,*,#13020,.T.);+#13020=EDGE_CURVE('',#8949,#9016,#13021,.T.);+#13021=LINE('',#8950,#58);+#13022=ORIENTED_EDGE('',*,*,#13010,.F.);+#13023=ORIENTED_EDGE('',*,*,#8953,.F.);+#13024=CYLINDRICAL_SURFACE('',#13025,0.2);+#13025=AXIS2_PLACEMENT_3D('',#8958,#87,#6022);+#13026=ADVANCED_FACE('',(#13027),#13032,.F.);+#13027=FACE_BOUND('',#13028,.F.);+#13028=EDGE_LOOP('',(#13029,#9014,#13030,#13031));+#13029=ORIENTED_EDGE('',*,*,#9007,.T.);+#13030=ORIENTED_EDGE('',*,*,#13020,.F.);+#13031=ORIENTED_EDGE('',*,*,#8948,.F.);+#13032=PLANE('',#13033);+#13033=AXIS2_PLACEMENT_3D('',#8943,#11416,#6014);+#13034=ADVANCED_FACE('',(#13035),#13038,.F.);+#13035=FACE_BOUND('',#13036,.T.);+#13036=EDGE_LOOP('',(#13037));+#13037=ORIENTED_EDGE('',*,*,#9343,.F.);+#13038=PLANE('',#13039);+#13039=AXIS2_PLACEMENT_3D('',#9348,#2450,#59);+#13040=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#13044)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#13041,#13042,#13043)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#13041=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#13042=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#13043=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#13044=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#13041,'distance_accuracy_value','confusion accuracy');+#13045=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#13046=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#13047,#13057,#13058,#13059,#13060,#13061,#13062,#13063,#13064,#13065,#13066,#13067,#13068,#13069,#13070,#13079,#13080,#13081,#13082,#13083,#13084,#13085,#13086,#13087,#13088,#13089,#13090,#13091,#13092,#13093,#13094,#13095,#13096,#13097,#13098,#13099,#13100,#13101,#13102,#13103,#13104,#13105,#13106,#13107,#13108,#13109,#13110,#13111,#13112,#13113,#13114,#13115,#13116,#13117,#13118,#13119,#13120,#13121,#13122,#13123,#13124,#13125,#13126,#13127,#13128,#13129,#13130,#13131,#13132,#13133,#13134,#13135,#13136,#13137,#13138,#13139,#13140,#13141,#13142,#13143,#13144,#13145,#13146,#13147,#13148,#13149,#13150,#13151,#13152,#13153,#13154,#13155,#13156,#13157,#13158,#13159,#13160,#13161,#13162,#13163,#13164,#13165,#13166,#13167,#13168,#13169,#13170,#13171,#13172,#13173,#13174,#13175,#13176,#13177,#13178,#13179,#13180,#13181,#13182,#13183,#13184,#13185,#13186,#13187,#13188,#13189,#13190,#13191,#13192,#13193,#13194,#13195,#13196,#13197,#13198,#13199,#13200,#13201,#13202,#13203,#13204,#13205,#13206,#13207,#13208,#13209,#13210,#13211,#13212,#13213,#13214,#13215,#13216,#13217,#13218,#13219,#13220,#13221,#13222,#13223,#13224,#13225,#13226,#13227,#13228,#13229,#13230,#13231,#13232,#13233,#13234,#13235,#13236,#13237,#13238,#13239,#13240,#13241,#13242,#13243,#13244,#13245,#13246,#13247,#13248,#13249,#13250,#13251,#13252,#13253,#13254,#13255,#13256,#13257,#13258,#13259,#13260,#13261,#13262,#13263,#13264,#13265,#13266,#13267,#13268,#13269,#13270,#13271,#13272,#13273,#13274,#13275,#13276,#13277,#13278,#13279,#13280,#13281,#13282,#13283,#13284,#13285,#13286,#13287,#13288,#13289,#13290,#13291,#13292,#13293,#13294,#13295,#13296,#13297,#13298,#13299,#13300,#13301,#13302,#13303,#13304,#13305,#13306,#13307,#13308,#13309,#13310,#13311,#13312,#13313,#13314,#13315,#13316,#13317,#13318,#13319,#13320,#13321,#13322,#13323,#13324,#13325,#13326,#13327,#13328,#13329,#13330,#13331,#13332,#13333,#13334,#13335,#13336,#13337,#13338,#13339,#13340,#13341,#13342,#13343,#13344,#13345,#13346,#13347,#13348,#13349,#13350,#13351,#13352,#13353,#13354,#13355,#13356,#13357,#13358,#13359,#13360,#13361,#13362,#13363,#13364,#13365,#13366,#13367,#13368,#13369,#13370,#13371,#13372,#13373,#13374,#13375,#13376,#13377,#13378,#13379,#13380,#13381,#13382,#13383,#13384,#13385,#13386,#13387,#13388,#13389,#13390,#13391,#13392,#13393,#13394,#13395,#13396,#13397,#13398,#13399,#13400,#13401,#13402,#13403,#13404,#13405,#13406,#13407,#13408,#13409,#13410,#13411,#13412,#13413,#13414,#13415,#13416,#13417,#13418,#13419,#13420,#13421,#13422,#13423,#13424,#13425,#13426,#13427,#13428,#13429,#13430,#13431,#13432,#13433,#13434,#13435,#13436,#13437,#13438,#13439,#13440,#13441,#13442,#13443,#13444,#13445,#13446,#13447,#13448,#13449,#13450,#13451,#13452,#13453,#13454,#13455,#13456,#13457,#13458,#13459,#13460,#13461,#13462,#13463,#13464,#13465,#13466,#13467,#13468,#13469,#13470,#13471,#13472,#13473,#13474,#13475,#13476,#13477,#13478,#13479,#13480,#13481,#13482,#13483,#13484,#13485,#13486,#13487,#13488,#13489,#13490,#13491,#13492,#13493,#13494,#13495,#13496,#13497,#13498,#13499,#13500,#13501,#13502,#13503,#13504,#13505,#13506,#13507,#13508,#13509,#13510,#13511,#13512,#13513,#13514,#13515,#13516,#13517,#13518,#13519,#13520,#13521,#13522,#13523,#13524,#13525,#13526,#13527,#13528,#13529,#13530,#13531,#13532,#13533,#13534,#13535,#13536,#13537,#13538,#13539,#13540,#13541,#13542,#13543,#13544,#13545,#13546,#13547,#13548,#13549,#13550,#13551,#13552,#13553,#13554,#13555,#13556,#13557,#13558,#13559,#13560,#13561,#13562,#13563,#13564,#13565,#13566,#13567,#13568,#13569,#13570,#13571,#13572,#13573,#13574,#13575,#13576,#13577,#13578,#13579,#13580,#13581,#13582,#13583,#13584,#13585,#13586,#13587,#13588,#13589,#13590,#13591,#13592,#13593,#13594,#13595,#13596,#13597,#13598,#13599,#13600,#13601,#13602,#13603,#13604,#13605,#13606,#13607,#13608,#13609,#13610,#13611,#13612,#13613,#13614,#13615,#13616,#13617,#13618,#13619,#13620,#13621,#13622,#13623,#13624,#13625,#13626,#13627,#13628,#13629,#13630,#13631,#13632,#13633,#13634,#13635,#13636,#13637,#13638,#13639,#13640,#13641,#13642,#13643,#13644,#13645,#13646,#13647,#13648,#13649,#13650,#13651,#13652,#13653,#13654,#13655,#13656,#13657,#13658,#13659,#13660,#13661,#13662,#13663,#13664,#13665,#13666,#13667,#13668,#13669,#13670,#13671,#13672,#13673,#13674,#13675,#13676,#13677,#13678,#13679,#13680,#13681,#13682,#13683,#13684,#13685,#13686,#13687,#13688,#13689,#13690,#13691,#13692,#13693,#13694,#13695,#13696,#13697,#13698,#13699,#13700,#13701,#13702,#13703,#13704,#13705,#13706,#13707,#13708,#13709,#13710,#13711,#13712,#13713,#13714,#13715,#13716,#13717,#13718,#13719,#13720,#13721,#13722,#13723,#13724,#13725,#13726,#13727,#13728,#13729,#13730,#13731,#13732,#13733,#13734,#13735,#13736,#13737,#13738,#13739,#13740,#13741,#13742,#13743,#13744,#13745,#13746,#13747,#13748,#13749,#13750),#13040);+#13047=STYLED_ITEM('color',(#13048),#17);+#13048=PRESENTATION_STYLE_ASSIGNMENT((#13049,#13055));+#13049=SURFACE_STYLE_USAGE(.BOTH.,#13050);+#13050=SURFACE_SIDE_STYLE('',(#13051));+#13051=SURFACE_STYLE_FILL_AREA(#13052);+#13052=FILL_AREA_STYLE('',(#13053));+#13053=FILL_AREA_STYLE_COLOUR('',#13054);+#13054=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#13055=CURVE_STYLE('',#13056,POSITIVE_LENGTH_MEASURE(0.1),#13054);+#13056=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#13057=STYLED_ITEM('color',(#13048),#43);+#13058=STYLED_ITEM('color',(#13048),#96);+#13059=STYLED_ITEM('color',(#13048),#109);+#13060=STYLED_ITEM('color',(#13048),#128);+#13061=STYLED_ITEM('color',(#13048),#141);+#13062=STYLED_ITEM('color',(#13048),#330);+#13063=STYLED_ITEM('color',(#13048),#519);+#13064=STYLED_ITEM('color',(#13048),#532);+#13065=STYLED_ITEM('color',(#13048),#545);+#13066=STYLED_ITEM('color',(#13048),#554);+#13067=STYLED_ITEM('color',(#13048),#569);+#13068=STYLED_ITEM('color',(#13048),#633);+#13069=STYLED_ITEM('color',(#13048),#644);+#13070=STYLED_ITEM('color',(#13071),#663);+#13071=PRESENTATION_STYLE_ASSIGNMENT((#13072,#13078));+#13072=SURFACE_STYLE_USAGE(.BOTH.,#13073);+#13073=SURFACE_SIDE_STYLE('',(#13074));+#13074=SURFACE_STYLE_FILL_AREA(#13075);+#13075=FILL_AREA_STYLE('',(#13076));+#13076=FILL_AREA_STYLE_COLOUR('',#13077);+#13077=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#13078=CURVE_STYLE('',#13056,POSITIVE_LENGTH_MEASURE(0.1),#13077);+#13079=STYLED_ITEM('color',(#13048),#688);+#13080=STYLED_ITEM('color',(#13071),#706);+#13081=STYLED_ITEM('color',(#13048),#727);+#13082=STYLED_ITEM('color',(#13071),#745);+#13083=STYLED_ITEM('color',(#13048),#766);+#13084=STYLED_ITEM('color',(#13071),#784);+#13085=STYLED_ITEM('color',(#13048),#805);+#13086=STYLED_ITEM('color',(#13071),#823);+#13087=STYLED_ITEM('color',(#13048),#844);+#13088=STYLED_ITEM('color',(#13071),#862);+#13089=STYLED_ITEM('color',(#13048),#883);+#13090=STYLED_ITEM('color',(#13071),#901);+#13091=STYLED_ITEM('color',(#13048),#922);+#13092=STYLED_ITEM('color',(#13071),#940);+#13093=STYLED_ITEM('color',(#13048),#961);+#13094=STYLED_ITEM('color',(#13071),#979);+#13095=STYLED_ITEM('color',(#13048),#1000);+#13096=STYLED_ITEM('color',(#13071),#1018);+#13097=STYLED_ITEM('color',(#13048),#1039);+#13098=STYLED_ITEM('color',(#13071),#1057);+#13099=STYLED_ITEM('color',(#13048),#1078);+#13100=STYLED_ITEM('color',(#13071),#1096);+#13101=STYLED_ITEM('color',(#13048),#1117);+#13102=STYLED_ITEM('color',(#13071),#1135);+#13103=STYLED_ITEM('color',(#13048),#1156);+#13104=STYLED_ITEM('color',(#13071),#1174);+#13105=STYLED_ITEM('color',(#13048),#1195);+#13106=STYLED_ITEM('color',(#13071),#1213);+#13107=STYLED_ITEM('color',(#13048),#1234);+#13108=STYLED_ITEM('color',(#13071),#1252);+#13109=STYLED_ITEM('color',(#13048),#1273);+#13110=STYLED_ITEM('color',(#13071),#1291);+#13111=STYLED_ITEM('color',(#13048),#1312);+#13112=STYLED_ITEM('color',(#13071),#1330);+#13113=STYLED_ITEM('color',(#13048),#1351);+#13114=STYLED_ITEM('color',(#13071),#1369);+#13115=STYLED_ITEM('color',(#13048),#1390);+#13116=STYLED_ITEM('color',(#13071),#1408);+#13117=STYLED_ITEM('color',(#13048),#1429);+#13118=STYLED_ITEM('color',(#13071),#1447);+#13119=STYLED_ITEM('color',(#13048),#1468);+#13120=STYLED_ITEM('color',(#13071),#1486);+#13121=STYLED_ITEM('color',(#13048),#1507);+#13122=STYLED_ITEM('color',(#13048),#1517);+#13123=STYLED_ITEM('color',(#13071),#1529);+#13124=STYLED_ITEM('color',(#13048),#1550);+#13125=STYLED_ITEM('color',(#13071),#1568);+#13126=STYLED_ITEM('color',(#13048),#1589);+#13127=STYLED_ITEM('color',(#13071),#1607);+#13128=STYLED_ITEM('color',(#13048),#1628);+#13129=STYLED_ITEM('color',(#13071),#1646);+#13130=STYLED_ITEM('color',(#13048),#1667);+#13131=STYLED_ITEM('color',(#13071),#1685);+#13132=STYLED_ITEM('color',(#13048),#1706);+#13133=STYLED_ITEM('color',(#13071),#1724);+#13134=STYLED_ITEM('color',(#13048),#1745);+#13135=STYLED_ITEM('color',(#13071),#1763);+#13136=STYLED_ITEM('color',(#13048),#1784);+#13137=STYLED_ITEM('color',(#13071),#1802);+#13138=STYLED_ITEM('color',(#13048),#1823);+#13139=STYLED_ITEM('color',(#13071),#1841);+#13140=STYLED_ITEM('color',(#13048),#1862);+#13141=STYLED_ITEM('color',(#13071),#1880);+#13142=STYLED_ITEM('color',(#13048),#1901);+#13143=STYLED_ITEM('color',(#13071),#1919);+#13144=STYLED_ITEM('color',(#13048),#1940);+#13145=STYLED_ITEM('color',(#13071),#1958);+#13146=STYLED_ITEM('color',(#13048),#1979);+#13147=STYLED_ITEM('color',(#13071),#1997);+#13148=STYLED_ITEM('color',(#13048),#2018);+#13149=STYLED_ITEM('color',(#13071),#2036);+#13150=STYLED_ITEM('color',(#13048),#2057);+#13151=STYLED_ITEM('color',(#13071),#2075);+#13152=STYLED_ITEM('color',(#13048),#2096);+#13153=STYLED_ITEM('color',(#13071),#2114);+#13154=STYLED_ITEM('color',(#13048),#2135);+#13155=STYLED_ITEM('color',(#13071),#2153);+#13156=STYLED_ITEM('color',(#13048),#2174);+#13157=STYLED_ITEM('color',(#13071),#2192);+#13158=STYLED_ITEM('color',(#13048),#2213);+#13159=STYLED_ITEM('color',(#13071),#2231);+#13160=STYLED_ITEM('color',(#13048),#2252);+#13161=STYLED_ITEM('color',(#13071),#2270);+#13162=STYLED_ITEM('color',(#13048),#2291);+#13163=STYLED_ITEM('color',(#13071),#2309);+#13164=STYLED_ITEM('color',(#13048),#2330);+#13165=STYLED_ITEM('color',(#13071),#2348);+#13166=STYLED_ITEM('color',(#13048),#2369);+#13167=STYLED_ITEM('color',(#13048),#2386);+#13168=STYLED_ITEM('color',(#13048),#2401);+#13169=STYLED_ITEM('color',(#13048),#2416);+#13170=STYLED_ITEM('color',(#13071),#2427);+#13171=STYLED_ITEM('color',(#13048),#2451);+#13172=STYLED_ITEM('color',(#13048),#2641);+#13173=STYLED_ITEM('color',(#13048),#2655);+#13174=STYLED_ITEM('color',(#13048),#2669);+#13175=STYLED_ITEM('color',(#13048),#2683);+#13176=STYLED_ITEM('color',(#13071),#2873);+#13177=STYLED_ITEM('color',(#13048),#2893);+#13178=STYLED_ITEM('color',(#13071),#2924);+#13179=STYLED_ITEM('color',(#13071),#2996);+#13180=STYLED_ITEM('color',(#13071),#3012);+#13181=STYLED_ITEM('color',(#13048),#3065);+#13182=STYLED_ITEM('color',(#13071),#3076);+#13183=STYLED_ITEM('color',(#13071),#3136);+#13184=STYLED_ITEM('color',(#13071),#3152);+#13185=STYLED_ITEM('color',(#13048),#3205);+#13186=STYLED_ITEM('color',(#13071),#3216);+#13187=STYLED_ITEM('color',(#13071),#3276);+#13188=STYLED_ITEM('color',(#13071),#3292);+#13189=STYLED_ITEM('color',(#13048),#3345);+#13190=STYLED_ITEM('color',(#13071),#3356);+#13191=STYLED_ITEM('color',(#13071),#3416);+#13192=STYLED_ITEM('color',(#13071),#3432);+#13193=STYLED_ITEM('color',(#13048),#3485);+#13194=STYLED_ITEM('color',(#13071),#3496);+#13195=STYLED_ITEM('color',(#13071),#3556);+#13196=STYLED_ITEM('color',(#13071),#3572);+#13197=STYLED_ITEM('color',(#13048),#3625);+#13198=STYLED_ITEM('color',(#13071),#3636);+#13199=STYLED_ITEM('color',(#13071),#3696);+#13200=STYLED_ITEM('color',(#13071),#3712);+#13201=STYLED_ITEM('color',(#13048),#3765);+#13202=STYLED_ITEM('color',(#13071),#3776);+#13203=STYLED_ITEM('color',(#13071),#3836);+#13204=STYLED_ITEM('color',(#13071),#3852);+#13205=STYLED_ITEM('color',(#13048),#3905);+#13206=STYLED_ITEM('color',(#13071),#3916);+#13207=STYLED_ITEM('color',(#13071),#3976);+#13208=STYLED_ITEM('color',(#13071),#3992);+#13209=STYLED_ITEM('color',(#13048),#4045);+#13210=STYLED_ITEM('color',(#13071),#4056);+#13211=STYLED_ITEM('color',(#13071),#4116);+#13212=STYLED_ITEM('color',(#13071),#4132);+#13213=STYLED_ITEM('color',(#13048),#4185);+#13214=STYLED_ITEM('color',(#13071),#4196);+#13215=STYLED_ITEM('color',(#13071),#4256);+#13216=STYLED_ITEM('color',(#13071),#4272);+#13217=STYLED_ITEM('color',(#13048),#4325);+#13218=STYLED_ITEM('color',(#13071),#4336);+#13219=STYLED_ITEM('color',(#13071),#4396);+#13220=STYLED_ITEM('color',(#13071),#4412);+#13221=STYLED_ITEM('color',(#13048),#4465);+#13222=STYLED_ITEM('color',(#13071),#4476);+#13223=STYLED_ITEM('color',(#13071),#4536);+#13224=STYLED_ITEM('color',(#13071),#4552);+#13225=STYLED_ITEM('color',(#13048),#4605);+#13226=STYLED_ITEM('color',(#13071),#4616);+#13227=STYLED_ITEM('color',(#13071),#4676);+#13228=STYLED_ITEM('color',(#13071),#4692);+#13229=STYLED_ITEM('color',(#13048),#4745);+#13230=STYLED_ITEM('color',(#13071),#4756);+#13231=STYLED_ITEM('color',(#13071),#4816);+#13232=STYLED_ITEM('color',(#13071),#4832);+#13233=STYLED_ITEM('color',(#13048),#4885);+#13234=STYLED_ITEM('color',(#13071),#4896);+#13235=STYLED_ITEM('color',(#13071),#4956);+#13236=STYLED_ITEM('color',(#13071),#4972);+#13237=STYLED_ITEM('color',(#13048),#5025);+#13238=STYLED_ITEM('color',(#13071),#5036);+#13239=STYLED_ITEM('color',(#13071),#5096);+#13240=STYLED_ITEM('color',(#13071),#5112);+#13241=STYLED_ITEM('color',(#13048),#5165);+#13242=STYLED_ITEM('color',(#13071),#5176);+#13243=STYLED_ITEM('color',(#13071),#5236);+#13244=STYLED_ITEM('color',(#13071),#5252);+#13245=STYLED_ITEM('color',(#13048),#5305);+#13246=STYLED_ITEM('color',(#13071),#5316);+#13247=STYLED_ITEM('color',(#13071),#5376);+#13248=STYLED_ITEM('color',(#13071),#5392);+#13249=STYLED_ITEM('color',(#13048),#5445);+#13250=STYLED_ITEM('color',(#13071),#5456);+#13251=STYLED_ITEM('color',(#13071),#5516);+#13252=STYLED_ITEM('color',(#13071),#5532);+#13253=STYLED_ITEM('color',(#13048),#5585);+#13254=STYLED_ITEM('color',(#13071),#5596);+#13255=STYLED_ITEM('color',(#13071),#5656);+#13256=STYLED_ITEM('color',(#13071),#5672);+#13257=STYLED_ITEM('color',(#13048),#5725);+#13258=STYLED_ITEM('color',(#13071),#5736);+#13259=STYLED_ITEM('color',(#13071),#5796);+#13260=STYLED_ITEM('color',(#13071),#5812);+#13261=STYLED_ITEM('color',(#13048),#5865);+#13262=STYLED_ITEM('color',(#13071),#5873);+#13263=STYLED_ITEM('color',(#13071),#5931);+#13264=STYLED_ITEM('color',(#13071),#5947);+#13265=STYLED_ITEM('color',(#13071),#5995);+#13266=STYLED_ITEM('color',(#13071),#6061);+#13267=STYLED_ITEM('color',(#13071),#6077);+#13268=STYLED_ITEM('color',(#13048),#6125);+#13269=STYLED_ITEM('color',(#13071),#6135);+#13270=STYLED_ITEM('color',(#13071),#6195);+#13271=STYLED_ITEM('color',(#13071),#6211);+#13272=STYLED_ITEM('color',(#13048),#6264);+#13273=STYLED_ITEM('color',(#13071),#6275);+#13274=STYLED_ITEM('color',(#13071),#6335);+#13275=STYLED_ITEM('color',(#13071),#6351);+#13276=STYLED_ITEM('color',(#13048),#6404);+#13277=STYLED_ITEM('color',(#13071),#6415);+#13278=STYLED_ITEM('color',(#13071),#6475);+#13279=STYLED_ITEM('color',(#13071),#6491);+#13280=STYLED_ITEM('color',(#13048),#6544);+#13281=STYLED_ITEM('color',(#13071),#6555);+#13282=STYLED_ITEM('color',(#13071),#6615);+#13283=STYLED_ITEM('color',(#13071),#6631);+#13284=STYLED_ITEM('color',(#13048),#6684);+#13285=STYLED_ITEM('color',(#13071),#6695);+#13286=STYLED_ITEM('color',(#13071),#6755);+#13287=STYLED_ITEM('color',(#13071),#6771);+#13288=STYLED_ITEM('color',(#13048),#6824);+#13289=STYLED_ITEM('color',(#13071),#6835);+#13290=STYLED_ITEM('color',(#13071),#6895);+#13291=STYLED_ITEM('color',(#13071),#6911);+#13292=STYLED_ITEM('color',(#13048),#6964);+#13293=STYLED_ITEM('color',(#13071),#6975);+#13294=STYLED_ITEM('color',(#13071),#7035);+#13295=STYLED_ITEM('color',(#13071),#7051);+#13296=STYLED_ITEM('color',(#13048),#7104);+#13297=STYLED_ITEM('color',(#13071),#7115);+#13298=STYLED_ITEM('color',(#13071),#7175);+#13299=STYLED_ITEM('color',(#13071),#7191);+#13300=STYLED_ITEM('color',(#13048),#7244);+#13301=STYLED_ITEM('color',(#13071),#7255);+#13302=STYLED_ITEM('color',(#13071),#7315);+#13303=STYLED_ITEM('color',(#13071),#7331);+#13304=STYLED_ITEM('color',(#13048),#7384);+#13305=STYLED_ITEM('color',(#13071),#7395);+#13306=STYLED_ITEM('color',(#13071),#7455);+#13307=STYLED_ITEM('color',(#13071),#7471);+#13308=STYLED_ITEM('color',(#13048),#7524);+#13309=STYLED_ITEM('color',(#13071),#7535);+#13310=STYLED_ITEM('color',(#13071),#7595);+#13311=STYLED_ITEM('color',(#13071),#7611);+#13312=STYLED_ITEM('color',(#13048),#7664);+#13313=STYLED_ITEM('color',(#13071),#7675);+#13314=STYLED_ITEM('color',(#13071),#7735);+#13315=STYLED_ITEM('color',(#13071),#7751);+#13316=STYLED_ITEM('color',(#13048),#7804);+#13317=STYLED_ITEM('color',(#13071),#7815);+#13318=STYLED_ITEM('color',(#13071),#7875);+#13319=STYLED_ITEM('color',(#13071),#7891);+#13320=STYLED_ITEM('color',(#13048),#7944);+#13321=STYLED_ITEM('color',(#13071),#7955);+#13322=STYLED_ITEM('color',(#13071),#8015);+#13323=STYLED_ITEM('color',(#13071),#8031);+#13324=STYLED_ITEM('color',(#13048),#8084);+#13325=STYLED_ITEM('color',(#13071),#8095);+#13326=STYLED_ITEM('color',(#13071),#8155);+#13327=STYLED_ITEM('color',(#13071),#8171);+#13328=STYLED_ITEM('color',(#13048),#8224);+#13329=STYLED_ITEM('color',(#13071),#8235);+#13330=STYLED_ITEM('color',(#13071),#8295);+#13331=STYLED_ITEM('color',(#13071),#8311);+#13332=STYLED_ITEM('color',(#13048),#8364);+#13333=STYLED_ITEM('color',(#13071),#8375);+#13334=STYLED_ITEM('color',(#13071),#8435);+#13335=STYLED_ITEM('color',(#13071),#8451);+#13336=STYLED_ITEM('color',(#13048),#8504);+#13337=STYLED_ITEM('color',(#13071),#8515);+#13338=STYLED_ITEM('color',(#13071),#8575);+#13339=STYLED_ITEM('color',(#13071),#8591);+#13340=STYLED_ITEM('color',(#13048),#8644);+#13341=STYLED_ITEM('color',(#13071),#8655);+#13342=STYLED_ITEM('color',(#13071),#8715);+#13343=STYLED_ITEM('color',(#13071),#8731);+#13344=STYLED_ITEM('color',(#13048),#8784);+#13345=STYLED_ITEM('color',(#13071),#8795);+#13346=STYLED_ITEM('color',(#13071),#8855);+#13347=STYLED_ITEM('color',(#13071),#8871);+#13348=STYLED_ITEM('color',(#13048),#8924);+#13349=STYLED_ITEM('color',(#13071),#8935);+#13350=STYLED_ITEM('color',(#13071),#8995);+#13351=STYLED_ITEM('color',(#13071),#9011);+#13352=STYLED_ITEM('color',(#13071),#9062);+#13353=STYLED_ITEM('color',(#13071),#9072);+#13354=STYLED_ITEM('color',(#13071),#9084);+#13355=STYLED_ITEM('color',(#13071),#9096);+#13356=STYLED_ITEM('color',(#13071),#9108);+#13357=STYLED_ITEM('color',(#13071),#9120);+#13358=STYLED_ITEM('color',(#13071),#9132);+#13359=STYLED_ITEM('color',(#13071),#9144);+#13360=STYLED_ITEM('color',(#13071),#9156);+#13361=STYLED_ITEM('color',(#13071),#9168);+#13362=STYLED_ITEM('color',(#13071),#9180);+#13363=STYLED_ITEM('color',(#13071),#9192);+#13364=STYLED_ITEM('color',(#13071),#9204);+#13365=STYLED_ITEM('color',(#13071),#9216);+#13366=STYLED_ITEM('color',(#13071),#9228);+#13367=STYLED_ITEM('color',(#13071),#9240);+#13368=STYLED_ITEM('color',(#13071),#9252);+#13369=STYLED_ITEM('color',(#13071),#9264);+#13370=STYLED_ITEM('color',(#13071),#9276);+#13371=STYLED_ITEM('color',(#13071),#9288);+#13372=STYLED_ITEM('color',(#13071),#9300);+#13373=STYLED_ITEM('color',(#13071),#9312);+#13374=STYLED_ITEM('color',(#13048),#9324);+#13375=STYLED_ITEM('color',(#13048),#9353);+#13376=STYLED_ITEM('color',(#13071),#9362);+#13377=STYLED_ITEM('color',(#13071),#9374);+#13378=STYLED_ITEM('color',(#13071),#9386);+#13379=STYLED_ITEM('color',(#13071),#9398);+#13380=STYLED_ITEM('color',(#13071),#9410);+#13381=STYLED_ITEM('color',(#13071),#9422);+#13382=STYLED_ITEM('color',(#13071),#9434);+#13383=STYLED_ITEM('color',(#13071),#9446);+#13384=STYLED_ITEM('color',(#13071),#9458);+#13385=STYLED_ITEM('color',(#13071),#9470);+#13386=STYLED_ITEM('color',(#13071),#9482);+#13387=STYLED_ITEM('color',(#13071),#9494);+#13388=STYLED_ITEM('color',(#13071),#9506);+#13389=STYLED_ITEM('color',(#13071),#9518);+#13390=STYLED_ITEM('color',(#13071),#9530);+#13391=STYLED_ITEM('color',(#13071),#9542);+#13392=STYLED_ITEM('color',(#13071),#9554);+#13393=STYLED_ITEM('color',(#13071),#9566);+#13394=STYLED_ITEM('color',(#13071),#9578);+#13395=STYLED_ITEM('color',(#13071),#9590);+#13396=STYLED_ITEM('color',(#13071),#9602);+#13397=STYLED_ITEM('color',(#13048),#9614);+#13398=STYLED_ITEM('color',(#13071),#9623);+#13399=STYLED_ITEM('color',(#13048),#9633);+#13400=STYLED_ITEM('color',(#13071),#9640);+#13401=STYLED_ITEM('color',(#13071),#9650);+#13402=STYLED_ITEM('color',(#13071),#9661);+#13403=STYLED_ITEM('color',(#13071),#9671);+#13404=STYLED_ITEM('color',(#13071),#9681);+#13405=STYLED_ITEM('color',(#13071),#9691);+#13406=STYLED_ITEM('color',(#13071),#9701);+#13407=STYLED_ITEM('color',(#13071),#9711);+#13408=STYLED_ITEM('color',(#13071),#9720);+#13409=STYLED_ITEM('color',(#13071),#9730);+#13410=STYLED_ITEM('color',(#13071),#9740);+#13411=STYLED_ITEM('color',(#13071),#9750);+#13412=STYLED_ITEM('color',(#13071),#9760);+#13413=STYLED_ITEM('color',(#13071),#9770);+#13414=STYLED_ITEM('color',(#13071),#9780);+#13415=STYLED_ITEM('color',(#13071),#9790);+#13416=STYLED_ITEM('color',(#13071),#9798);+#13417=STYLED_ITEM('color',(#13071),#9808);+#13418=STYLED_ITEM('color',(#13071),#9818);+#13419=STYLED_ITEM('color',(#13071),#9828);+#13420=STYLED_ITEM('color',(#13071),#9838);+#13421=STYLED_ITEM('color',(#13071),#9848);+#13422=STYLED_ITEM('color',(#13071),#9858);+#13423=STYLED_ITEM('color',(#13071),#9868);+#13424=STYLED_ITEM('color',(#13071),#9876);+#13425=STYLED_ITEM('color',(#13071),#9886);+#13426=STYLED_ITEM('color',(#13071),#9896);+#13427=STYLED_ITEM('color',(#13071),#9906);+#13428=STYLED_ITEM('color',(#13071),#9916);+#13429=STYLED_ITEM('color',(#13071),#9926);+#13430=STYLED_ITEM('color',(#13071),#9936);+#13431=STYLED_ITEM('color',(#13071),#9946);+#13432=STYLED_ITEM('color',(#13071),#9954);+#13433=STYLED_ITEM('color',(#13071),#9964);+#13434=STYLED_ITEM('color',(#13071),#9974);+#13435=STYLED_ITEM('color',(#13071),#9984);+#13436=STYLED_ITEM('color',(#13071),#9994);+#13437=STYLED_ITEM('color',(#13071),#10004);+#13438=STYLED_ITEM('color',(#13071),#10014);+#13439=STYLED_ITEM('color',(#13071),#10024);+#13440=STYLED_ITEM('color',(#13071),#10032);+#13441=STYLED_ITEM('color',(#13071),#10042);+#13442=STYLED_ITEM('color',(#13071),#10052);+#13443=STYLED_ITEM('color',(#13071),#10062);+#13444=STYLED_ITEM('color',(#13071),#10072);+#13445=STYLED_ITEM('color',(#13071),#10082);+#13446=STYLED_ITEM('color',(#13071),#10092);+#13447=STYLED_ITEM('color',(#13071),#10102);+#13448=STYLED_ITEM('color',(#13071),#10110);+#13449=STYLED_ITEM('color',(#13071),#10120);+#13450=STYLED_ITEM('color',(#13071),#10130);+#13451=STYLED_ITEM('color',(#13071),#10140);+#13452=STYLED_ITEM('color',(#13071),#10150);+#13453=STYLED_ITEM('color',(#13071),#10160);+#13454=STYLED_ITEM('color',(#13071),#10170);+#13455=STYLED_ITEM('color',(#13071),#10180);+#13456=STYLED_ITEM('color',(#13071),#10188);+#13457=STYLED_ITEM('color',(#13071),#10198);+#13458=STYLED_ITEM('color',(#13071),#10208);+#13459=STYLED_ITEM('color',(#13071),#10218);+#13460=STYLED_ITEM('color',(#13071),#10228);+#13461=STYLED_ITEM('color',(#13071),#10238);+#13462=STYLED_ITEM('color',(#13071),#10248);+#13463=STYLED_ITEM('color',(#13071),#10258);+#13464=STYLED_ITEM('color',(#13071),#10266);+#13465=STYLED_ITEM('color',(#13071),#10276);+#13466=STYLED_ITEM('color',(#13071),#10286);+#13467=STYLED_ITEM('color',(#13071),#10296);+#13468=STYLED_ITEM('color',(#13071),#10306);+#13469=STYLED_ITEM('color',(#13071),#10316);+#13470=STYLED_ITEM('color',(#13071),#10326);+#13471=STYLED_ITEM('color',(#13071),#10336);+#13472=STYLED_ITEM('color',(#13071),#10344);+#13473=STYLED_ITEM('color',(#13071),#10354);+#13474=STYLED_ITEM('color',(#13071),#10364);+#13475=STYLED_ITEM('color',(#13071),#10374);+#13476=STYLED_ITEM('color',(#13071),#10384);+#13477=STYLED_ITEM('color',(#13071),#10394);+#13478=STYLED_ITEM('color',(#13071),#10404);+#13479=STYLED_ITEM('color',(#13071),#10414);+#13480=STYLED_ITEM('color',(#13071),#10422);+#13481=STYLED_ITEM('color',(#13071),#10432);+#13482=STYLED_ITEM('color',(#13071),#10442);+#13483=STYLED_ITEM('color',(#13071),#10452);+#13484=STYLED_ITEM('color',(#13071),#10462);+#13485=STYLED_ITEM('color',(#13071),#10472);+#13486=STYLED_ITEM('color',(#13071),#10482);+#13487=STYLED_ITEM('color',(#13071),#10492);+#13488=STYLED_ITEM('color',(#13071),#10500);+#13489=STYLED_ITEM('color',(#13071),#10510);+#13490=STYLED_ITEM('color',(#13071),#10520);+#13491=STYLED_ITEM('color',(#13071),#10530);+#13492=STYLED_ITEM('color',(#13071),#10540);+#13493=STYLED_ITEM('color',(#13071),#10550);+#13494=STYLED_ITEM('color',(#13071),#10560);+#13495=STYLED_ITEM('color',(#13071),#10570);+#13496=STYLED_ITEM('color',(#13071),#10578);+#13497=STYLED_ITEM('color',(#13071),#10588);+#13498=STYLED_ITEM('color',(#13071),#10598);+#13499=STYLED_ITEM('color',(#13071),#10608);+#13500=STYLED_ITEM('color',(#13071),#10618);+#13501=STYLED_ITEM('color',(#13071),#10628);+#13502=STYLED_ITEM('color',(#13071),#10638);+#13503=STYLED_ITEM('color',(#13071),#10648);+#13504=STYLED_ITEM('color',(#13071),#10656);+#13505=STYLED_ITEM('color',(#13071),#10666);+#13506=STYLED_ITEM('color',(#13071),#10676);+#13507=STYLED_ITEM('color',(#13071),#10686);+#13508=STYLED_ITEM('color',(#13071),#10696);+#13509=STYLED_ITEM('color',(#13071),#10706);+#13510=STYLED_ITEM('color',(#13071),#10716);+#13511=STYLED_ITEM('color',(#13071),#10726);+#13512=STYLED_ITEM('color',(#13071),#10734);+#13513=STYLED_ITEM('color',(#13071),#10744);+#13514=STYLED_ITEM('color',(#13071),#10754);+#13515=STYLED_ITEM('color',(#13071),#10764);+#13516=STYLED_ITEM('color',(#13071),#10774);+#13517=STYLED_ITEM('color',(#13071),#10784);+#13518=STYLED_ITEM('color',(#13071),#10794);+#13519=STYLED_ITEM('color',(#13071),#10804);+#13520=STYLED_ITEM('color',(#13071),#10812);+#13521=STYLED_ITEM('color',(#13071),#10822);+#13522=STYLED_ITEM('color',(#13071),#10832);+#13523=STYLED_ITEM('color',(#13071),#10842);+#13524=STYLED_ITEM('color',(#13071),#10852);+#13525=STYLED_ITEM('color',(#13071),#10862);+#13526=STYLED_ITEM('color',(#13071),#10872);+#13527=STYLED_ITEM('color',(#13071),#10882);+#13528=STYLED_ITEM('color',(#13071),#10890);+#13529=STYLED_ITEM('color',(#13071),#10900);+#13530=STYLED_ITEM('color',(#13071),#10910);+#13531=STYLED_ITEM('color',(#13071),#10920);+#13532=STYLED_ITEM('color',(#13071),#10930);+#13533=STYLED_ITEM('color',(#13071),#10940);+#13534=STYLED_ITEM('color',(#13071),#10950);+#13535=STYLED_ITEM('color',(#13071),#10960);+#13536=STYLED_ITEM('color',(#13071),#10968);+#13537=STYLED_ITEM('color',(#13071),#10978);+#13538=STYLED_ITEM('color',(#13071),#10988);+#13539=STYLED_ITEM('color',(#13071),#10998);+#13540=STYLED_ITEM('color',(#13071),#11008);+#13541=STYLED_ITEM('color',(#13071),#11018);+#13542=STYLED_ITEM('color',(#13071),#11028);+#13543=STYLED_ITEM('color',(#13071),#11038);+#13544=STYLED_ITEM('color',(#13071),#11046);+#13545=STYLED_ITEM('color',(#13071),#11056);+#13546=STYLED_ITEM('color',(#13071),#11066);+#13547=STYLED_ITEM('color',(#13071),#11076);+#13548=STYLED_ITEM('color',(#13071),#11086);+#13549=STYLED_ITEM('color',(#13071),#11096);+#13550=STYLED_ITEM('color',(#13071),#11106);+#13551=STYLED_ITEM('color',(#13071),#11116);+#13552=STYLED_ITEM('color',(#13071),#11124);+#13553=STYLED_ITEM('color',(#13071),#11134);+#13554=STYLED_ITEM('color',(#13071),#11144);+#13555=STYLED_ITEM('color',(#13071),#11154);+#13556=STYLED_ITEM('color',(#13071),#11164);+#13557=STYLED_ITEM('color',(#13071),#11174);+#13558=STYLED_ITEM('color',(#13071),#11184);+#13559=STYLED_ITEM('color',(#13071),#11194);+#13560=STYLED_ITEM('color',(#13071),#11202);+#13561=STYLED_ITEM('color',(#13071),#11212);+#13562=STYLED_ITEM('color',(#13071),#11222);+#13563=STYLED_ITEM('color',(#13071),#11232);+#13564=STYLED_ITEM('color',(#13071),#11242);+#13565=STYLED_ITEM('color',(#13071),#11252);+#13566=STYLED_ITEM('color',(#13071),#11262);+#13567=STYLED_ITEM('color',(#13071),#11272);+#13568=STYLED_ITEM('color',(#13071),#11280);+#13569=STYLED_ITEM('color',(#13071),#11290);+#13570=STYLED_ITEM('color',(#13071),#11300);+#13571=STYLED_ITEM('color',(#13071),#11310);+#13572=STYLED_ITEM('color',(#13071),#11320);+#13573=STYLED_ITEM('color',(#13071),#11330);+#13574=STYLED_ITEM('color',(#13071),#11340);+#13575=STYLED_ITEM('color',(#13071),#11348);+#13576=STYLED_ITEM('color',(#13071),#11359);+#13577=STYLED_ITEM('color',(#13071),#11368);+#13578=STYLED_ITEM('color',(#13071),#11378);+#13579=STYLED_ITEM('color',(#13071),#11388);+#13580=STYLED_ITEM('color',(#13071),#11398);+#13581=STYLED_ITEM('color',(#13071),#11408);+#13582=STYLED_ITEM('color',(#13071),#11417);+#13583=STYLED_ITEM('color',(#13071),#11427);+#13584=STYLED_ITEM('color',(#13071),#11437);+#13585=STYLED_ITEM('color',(#13071),#11446);+#13586=STYLED_ITEM('color',(#13071),#11456);+#13587=STYLED_ITEM('color',(#13071),#11466);+#13588=STYLED_ITEM('color',(#13071),#11476);+#13589=STYLED_ITEM('color',(#13071),#11486);+#13590=STYLED_ITEM('color',(#13071),#11494);+#13591=STYLED_ITEM('color',(#13071),#11504);+#13592=STYLED_ITEM('color',(#13071),#11514);+#13593=STYLED_ITEM('color',(#13071),#11523);+#13594=STYLED_ITEM('color',(#13071),#11533);+#13595=STYLED_ITEM('color',(#13071),#11543);+#13596=STYLED_ITEM('color',(#13071),#11553);+#13597=STYLED_ITEM('color',(#13071),#11563);+#13598=STYLED_ITEM('color',(#13071),#11571);+#13599=STYLED_ITEM('color',(#13071),#11581);+#13600=STYLED_ITEM('color',(#13071),#11591);+#13601=STYLED_ITEM('color',(#13071),#11600);+#13602=STYLED_ITEM('color',(#13071),#11610);+#13603=STYLED_ITEM('color',(#13071),#11620);+#13604=STYLED_ITEM('color',(#13071),#11630);+#13605=STYLED_ITEM('color',(#13071),#11640);+#13606=STYLED_ITEM('color',(#13071),#11648);+#13607=STYLED_ITEM('color',(#13071),#11658);+#13608=STYLED_ITEM('color',(#13071),#11668);+#13609=STYLED_ITEM('color',(#13071),#11677);+#13610=STYLED_ITEM('color',(#13071),#11687);+#13611=STYLED_ITEM('color',(#13071),#11697);+#13612=STYLED_ITEM('color',(#13071),#11707);+#13613=STYLED_ITEM('color',(#13071),#11717);+#13614=STYLED_ITEM('color',(#13071),#11725);+#13615=STYLED_ITEM('color',(#13071),#11735);+#13616=STYLED_ITEM('color',(#13071),#11745);+#13617=STYLED_ITEM('color',(#13071),#11754);+#13618=STYLED_ITEM('color',(#13071),#11764);+#13619=STYLED_ITEM('color',(#13071),#11774);+#13620=STYLED_ITEM('color',(#13071),#11784);+#13621=STYLED_ITEM('color',(#13071),#11794);+#13622=STYLED_ITEM('color',(#13071),#11802);+#13623=STYLED_ITEM('color',(#13071),#11812);+#13624=STYLED_ITEM('color',(#13071),#11822);+#13625=STYLED_ITEM('color',(#13071),#11831);+#13626=STYLED_ITEM('color',(#13071),#11841);+#13627=STYLED_ITEM('color',(#13071),#11851);+#13628=STYLED_ITEM('color',(#13071),#11861);+#13629=STYLED_ITEM('color',(#13071),#11871);+#13630=STYLED_ITEM('color',(#13071),#11879);+#13631=STYLED_ITEM('color',(#13071),#11889);+#13632=STYLED_ITEM('color',(#13071),#11899);+#13633=STYLED_ITEM('color',(#13071),#11908);+#13634=STYLED_ITEM('color',(#13071),#11918);+#13635=STYLED_ITEM('color',(#13071),#11928);+#13636=STYLED_ITEM('color',(#13071),#11938);+#13637=STYLED_ITEM('color',(#13071),#11948);+#13638=STYLED_ITEM('color',(#13071),#11956);+#13639=STYLED_ITEM('color',(#13071),#11966);+#13640=STYLED_ITEM('color',(#13071),#11976);+#13641=STYLED_ITEM('color',(#13071),#11985);+#13642=STYLED_ITEM('color',(#13071),#11995);+#13643=STYLED_ITEM('color',(#13071),#12005);+#13644=STYLED_ITEM('color',(#13071),#12015);+#13645=STYLED_ITEM('color',(#13071),#12025);+#13646=STYLED_ITEM('color',(#13071),#12033);+#13647=STYLED_ITEM('color',(#13071),#12043);+#13648=STYLED_ITEM('color',(#13071),#12053);+#13649=STYLED_ITEM('color',(#13071),#12062);+#13650=STYLED_ITEM('color',(#13071),#12072);+#13651=STYLED_ITEM('color',(#13071),#12082);+#13652=STYLED_ITEM('color',(#13071),#12092);+#13653=STYLED_ITEM('color',(#13071),#12102);+#13654=STYLED_ITEM('color',(#13071),#12110);+#13655=STYLED_ITEM('color',(#13071),#12120);+#13656=STYLED_ITEM('color',(#13071),#12130);+#13657=STYLED_ITEM('color',(#13071),#12139);+#13658=STYLED_ITEM('color',(#13071),#12149);+#13659=STYLED_ITEM('color',(#13071),#12159);+#13660=STYLED_ITEM('color',(#13071),#12169);+#13661=STYLED_ITEM('color',(#13071),#12179);+#13662=STYLED_ITEM('color',(#13071),#12187);+#13663=STYLED_ITEM('color',(#13071),#12197);+#13664=STYLED_ITEM('color',(#13071),#12207);+#13665=STYLED_ITEM('color',(#13071),#12216);+#13666=STYLED_ITEM('color',(#13071),#12226);+#13667=STYLED_ITEM('color',(#13071),#12236);+#13668=STYLED_ITEM('color',(#13071),#12246);+#13669=STYLED_ITEM('color',(#13071),#12256);+#13670=STYLED_ITEM('color',(#13071),#12264);+#13671=STYLED_ITEM('color',(#13071),#12274);+#13672=STYLED_ITEM('color',(#13071),#12284);+#13673=STYLED_ITEM('color',(#13071),#12293);+#13674=STYLED_ITEM('color',(#13071),#12303);+#13675=STYLED_ITEM('color',(#13071),#12313);+#13676=STYLED_ITEM('color',(#13071),#12323);+#13677=STYLED_ITEM('color',(#13071),#12333);+#13678=STYLED_ITEM('color',(#13071),#12341);+#13679=STYLED_ITEM('color',(#13071),#12351);+#13680=STYLED_ITEM('color',(#13071),#12361);+#13681=STYLED_ITEM('color',(#13071),#12370);+#13682=STYLED_ITEM('color',(#13071),#12380);+#13683=STYLED_ITEM('color',(#13071),#12390);+#13684=STYLED_ITEM('color',(#13071),#12400);+#13685=STYLED_ITEM('color',(#13071),#12410);+#13686=STYLED_ITEM('color',(#13071),#12418);+#13687=STYLED_ITEM('color',(#13071),#12428);+#13688=STYLED_ITEM('color',(#13071),#12438);+#13689=STYLED_ITEM('color',(#13071),#12447);+#13690=STYLED_ITEM('color',(#13071),#12457);+#13691=STYLED_ITEM('color',(#13071),#12467);+#13692=STYLED_ITEM('color',(#13071),#12477);+#13693=STYLED_ITEM('color',(#13071),#12487);+#13694=STYLED_ITEM('color',(#13071),#12495);+#13695=STYLED_ITEM('color',(#13071),#12505);+#13696=STYLED_ITEM('color',(#13071),#12515);+#13697=STYLED_ITEM('color',(#13071),#12524);+#13698=STYLED_ITEM('color',(#13071),#12534);+#13699=STYLED_ITEM('color',(#13071),#12544);+#13700=STYLED_ITEM('color',(#13071),#12554);+#13701=STYLED_ITEM('color',(#13071),#12564);+#13702=STYLED_ITEM('color',(#13071),#12572);+#13703=STYLED_ITEM('color',(#13071),#12582);+#13704=STYLED_ITEM('color',(#13071),#12592);+#13705=STYLED_ITEM('color',(#13071),#12601);+#13706=STYLED_ITEM('color',(#13071),#12611);+#13707=STYLED_ITEM('color',(#13071),#12621);+#13708=STYLED_ITEM('color',(#13071),#12631);+#13709=STYLED_ITEM('color',(#13071),#12641);+#13710=STYLED_ITEM('color',(#13071),#12649);+#13711=STYLED_ITEM('color',(#13071),#12659);+#13712=STYLED_ITEM('color',(#13071),#12669);+#13713=STYLED_ITEM('color',(#13071),#12678);+#13714=STYLED_ITEM('color',(#13071),#12688);+#13715=STYLED_ITEM('color',(#13071),#12698);+#13716=STYLED_ITEM('color',(#13071),#12708);+#13717=STYLED_ITEM('color',(#13071),#12718);+#13718=STYLED_ITEM('color',(#13071),#12726);+#13719=STYLED_ITEM('color',(#13071),#12736);+#13720=STYLED_ITEM('color',(#13071),#12746);+#13721=STYLED_ITEM('color',(#13071),#12755);+#13722=STYLED_ITEM('color',(#13071),#12765);+#13723=STYLED_ITEM('color',(#13071),#12775);+#13724=STYLED_ITEM('color',(#13071),#12785);+#13725=STYLED_ITEM('color',(#13071),#12795);+#13726=STYLED_ITEM('color',(#13071),#12803);+#13727=STYLED_ITEM('color',(#13071),#12813);+#13728=STYLED_ITEM('color',(#13071),#12823);+#13729=STYLED_ITEM('color',(#13071),#12832);+#13730=STYLED_ITEM('color',(#13071),#12842);+#13731=STYLED_ITEM('color',(#13071),#12852);+#13732=STYLED_ITEM('color',(#13071),#12862);+#13733=STYLED_ITEM('color',(#13071),#12872);+#13734=STYLED_ITEM('color',(#13071),#12880);+#13735=STYLED_ITEM('color',(#13071),#12890);+#13736=STYLED_ITEM('color',(#13071),#12900);+#13737=STYLED_ITEM('color',(#13071),#12909);+#13738=STYLED_ITEM('color',(#13071),#12919);+#13739=STYLED_ITEM('color',(#13071),#12929);+#13740=STYLED_ITEM('color',(#13071),#12939);+#13741=STYLED_ITEM('color',(#13071),#12949);+#13742=STYLED_ITEM('color',(#13071),#12957);+#13743=STYLED_ITEM('color',(#13071),#12967);+#13744=STYLED_ITEM('color',(#13071),#12977);+#13745=STYLED_ITEM('color',(#13071),#12986);+#13746=STYLED_ITEM('color',(#13071),#12996);+#13747=STYLED_ITEM('color',(#13071),#13006);+#13748=STYLED_ITEM('color',(#13071),#13016);+#13749=STYLED_ITEM('color',(#13071),#13026);+#13750=STYLED_ITEM('color',(#13751),#13034);+#13751=PRESENTATION_STYLE_ASSIGNMENT((#13752,#13758));+#13752=SURFACE_STYLE_USAGE(.BOTH.,#13753);+#13753=SURFACE_SIDE_STYLE('',(#13754));+#13754=SURFACE_STYLE_FILL_AREA(#13755);+#13755=FILL_AREA_STYLE('',(#13756));+#13756=FILL_AREA_STYLE_COLOUR('',#13757);+#13757=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#13758=CURVE_STYLE('',#13056,POSITIVE_LENGTH_MEASURE(0.1),#13757);+ENDSEC;+END-ISO-10303-21;