CX3225GA08000D0PTVTT - 8 MHz Automotive Crystal, 3.2 x 2.5 mm

{
 "plan": {
  "schema": "adom/mark-plan@1",
  "mpn": "CX3225GA08000D0PTVTT",
  "step": "/tmp/claude-1001/cx/work/cx3225ga08000d0ptvtt.step",
  "footprint": "/tmp/claude-1001/cx/work/cx3225ga08000d0ptvtt.kicad_mod",
  "standUp": [],
  "standUpSource": "as-is (Z up)",
  "inputs": {
   "up": "auto",
   "face": "top",
   "along": null,
   "upSupplied": false,
   "faceSupplied": true,
   "faceSource": "--face top"
  },
  "face": "top",
  "pin1": {
   "source": "footprint pad 1",
   "xyMm": [
    -1.0,
    -0.0
   ],
   "corner": "left/middle"
  },
  "existingMarks": [],
  "vendorMarking": {
   "present": false,
   "glyphFaces": 0
  },
  "faceNormal": [
   0,
   0,
   1
  ],
  "longAxis": {
   "axis": "x",
   "vector": [
    1.0,
    0.0,
    0.0
   ],
   "why": "two-terminal part: along the body, pad 1 to pad 2 (between the terminations)",
   "source": "two-terminal",
   "override": null,
   "pinRows": null
  },
  "readingDirection": {
   "vector": [
    1.0,
    0.0,
    0.0
   ],
   "angleDeg": 0,
   "textUp": [
    -0.0,
    1.0,
    0.0
   ],
   "rule": "pin 1 / pad 1 at the start (left) of the text, and below it when it sits on a side"
  },
  "band": {
   "regionMm": [
    -1.5,
    -1.15,
    1.5,
    1.15
   ],
   "zMm": 0.85,
   "lengthMm": 3.0,
   "heightMm": 2.3,
   "why": "highest flat face over the body centre",
   "terminationsExcludedBy": null,
   "trimmedEnds": [],
   "keepouts": [],
   "sideTurn": null,
   "margins": {
    "lengthEachSide": 0.12,
    "heightEachSide": 0.15
   }
  },
  "text": {
   "lines": [
    "CX3225GA",
    "08000D0PTVTT"
   ],
   "chars": 20,
   "capHeightMm": 0.236,
   "smallestLineMm": 0.236,
   "heightPctOfBand": 23.6,
   "why": "two lines: the smaller line (0.236 mm) beats one line (0.141 mm) by 1.68x",
   "alternative": {
    "lines": [
     "CX3225GA08000D0PTVTT"
    ],
    "capHeightMm": 0.1406,
    "smallestLineMm": 0.1406
   },
   "font": "service-step2glb /laser-etch (single-stroke outline font)"
  },
  "etch": {
   "poseQuarterTurnsZ": 0,
   "service": "/laser-etch?mode=flat",
   "note": "turn so the reading direction is +X, etch, fit the mark into the band, turn back"
  },
  "outline": {
   "upAxis": "z",
   "poseRotZDeg": 180,
   "rot": 180,
   "recipe": "adom-aiflow-etch outline <part.step> --footprint <part.kicad_mod> --mpn CX3225GA08000D0PTVTT (stands the STEP up (as-is (Z up)), turns it 180 deg about Z and draws CX3225GA / 08000D0PTVTT on the planned band, rot 180)",
   "why": "iso camera looks from +X+Y+Z: text along +Y (rot 90) or -X (rot 180) reads left to right with pin 1 toward the viewer"
  },
  "widget": {
   "px": 320,
   "pxPerMm": 71.46,
   "capHeightPx": 13.8
  },
  "hints": [],
  "warnings": [],
  "summary": "Mark along the 3.00 mm axis (+X), 0.24 mm text (2 lines), upright with pin 1 left middle, outline rot 180 after a 180 deg pose turn; ~14 px caps at 320 px"
 },
 "etch": {
  "out": "/tmp/claude-1001/cx/work/cx3225ga08000d0ptvtt-etched.step",
  "mpn": "CX3225GA08000D0PTVTT",
  "lines": [
   "CX3225GA",
   "08000D0PTVTT"
  ],
  "removedOldMarks": [],
  "turns": [],
  "serviceMarkTurnedQuarter": 0,
  "line2Scaled": true,
  "fit": {
   "scale": 0.5816,
   "capMm": 0.2358,
   "markMm": [
    2.28,
    0.5511
   ],
   "bandMm": [
    3.0,
    2.3
   ],
   "zMm": 0.855
  }
 }
}