Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

CRCW040212K0FKEDHP

VISHAY INTERTECHNOLOGIES · Global Sourcing Parts · 0402

CRCW040212K0FKEDHP from VISHAY INTERTECHNOLOGIES, in a 0402. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised resistor; either orientation.
2 2 passive Terminal 2 of an unpolarised resistor; either orientation.

Key specifications

Parameter Value
Manufacturer VISHAY INTERTECHNOLOGIES
Package 0402
Category Global Sourcing Parts
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resistance tolerance -1 1 % 2
Temperature coefficient -100 100 ppm/K (20 / -55 / 20) °C and (20 / 155 / 20) °C 7
Rated dissipation, P70 P70 0.2 W P70 1
Operating voltage, Umax. ACRMS/DC Umax. 50 V ACRMS/DC 1
Permissible voltage against ambient (insulation) Uins 75 V 1 min 1
Permissible film temperature ϑF max. 155 °C 1
Operating temperature range -55 155 °C 1
Max. resistance change for resistance range, after 1000 h /ΔR/R/ 2 % at P70; after 1000 h 1
Max. resistance change for resistance range, after 8000 h /ΔR/R/ 4 % at P70; after 8000 h 1
Failure rate FIT 0.1 x 10-9/h observed 1
Endurance at 70 °C, 1000 h permissible change ΔR -2 2 % R + 0.1 Ω 70 °C; 1000 h; 1.5 h on, 0.5 h off 7
Endurance at 70 °C, 8000 h permissible change ΔR -4 4 % R + 0.1 Ω 70 °C; 8000 h 7
Endurance at upper category temperature permissible change ΔR -2 2 % R + 0.1 Ω 155 °C; 1000 h 7
Damp heat, steady state permissible change ΔR -1 1 % R + 0.05 Ω (40 ± 2) °C; 56 days; (93 ± 3) % RH 7
Damp heat, steady state accelerated permissible change ΔR -2 2 % R + 0.1 Ω (85 ± 2) °C; (85 ± 5) % RH; U ≤ 100 V; 1000 h 7
Rapid change of temperature permissible change ΔR -1 1 % R + 0.05 Ω 30 min at -55 °C and 30 min at 125 °C; 1000 cycles 8
Short time overload permissible change ΔR -2 2 % R + 0.05 Ω U = 2.5 x ≤ 2 x Umax., whichever is less severe; 5 s 8
Single pulse high voltage overload permissible change ΔR -1 1 % R + 0.05 Ω Severity no. 4; 10 pulses 10 µs/700 µs 8
Periodic electric overload permissible change ΔR -1 1 % R + 0.05 Ω 0.1 s on; 2.5 s off; 1000 cycles 8
Electrostatic discharge (human body model) permissible change ΔR -1 1 % R + 0.05 Ω IEC 61340-3-1; 3 pos. + 3 neg. discharges 8
Vibration permissible change ΔR -0.5 0.5 % R + 0.05 Ω 10 Hz to 2000 Hz; 7.5 h 8
Resistance to soldering heat permissible change ΔR -0.5 0.5 % R + 0.05 Ω (260 ± 5) °C; (10 ± 1) s 8
Resistance value 12 kΩ 2

CAD (KiCad official)

  • Symbol: CRCW040212K0FKEDHP
  • Footprint: Resistor_SMD:R_0402_1005Metric
  • 3D model: 0402 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: VISHAY INTERTECHNOLOGIES datasheet (10 pp, sha256 a4bbdbded4d6abb0, retrieved 2026-10-21, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF