470 Ω Resistor 0402 - Bourns CR0402-FX-4700GLF

@@ -350,10 +350,10 @@ <rect x="1" y="1" width="2" height="1" fill="none" stroke="#FF26E2" stroke-width="0.05" stroke-dasharray="0.2,0.1"/> <rect x="1.5" y="1.25" width="1" height="0.5" fill="none" stroke="#6e7681" stroke-width="0.1"/> <line x1="1.835" y1="1.14" x2="2.165" y2="1.14" stroke="#00cccc" stroke-width="0.12" stroke-linecap="round"/><line x1="1.835" y1="1.86" x2="2.165" y2="1.86" stroke="#00cccc" stroke-width="0.12" stroke-linecap="round"/>-<rect x="1.25" y="1.25" width="0.475" height="0.5" rx="0" ry="0" fill="#C83434" stroke="#ef5350" stroke-width="0.04"/>-<text x="1.4875" y="1.5" text-anchor="middle" dominant-baseline="central" font-size="0.214" fill="#fff" font-family="sans-serif">1</text>-<rect x="2.275" y="1.25" width="0.475" height="0.5" rx="0" ry="0" fill="#C83434" stroke="#ef5350" stroke-width="0.04"/>-<text x="2.5125" y="1.5" text-anchor="middle" dominant-baseline="central" font-size="0.214" fill="#fff" font-family="sans-serif">2</text>+<rect x="1.25" y="1.25" width="0.5" height="0.5" rx="0" ry="0" fill="#C83434" stroke="#ef5350" stroke-width="0.04"/>+<text x="1.5" y="1.5" text-anchor="middle" dominant-baseline="central" font-size="0.225" fill="#fff" font-family="sans-serif">1</text>+<rect x="2.25" y="1.25" width="0.5" height="0.5" rx="0" ry="0" fill="#C83434" stroke="#ef5350" stroke-width="0.04"/>+<text x="2.5" y="1.5" text-anchor="middle" dominant-baseline="central" font-size="0.225" fill="#fff" font-family="sans-serif">2</text> </svg>   </div>   <a class="edit-btn" href="https://coder.john-service-wiki-a054078430ce38e4.containers.adom.inc/proxy/8785/wiki/components/cr0402-fx-4700glf/edit?field=content" target="_blank" title="Suggest corrections on Adom Wiki">@@ -371,7 +371,7 @@   <div class="info-row">          -    <div class="info-item"><span class="info-label">Desc</span><span class="info-value">Land pattern: Bourns CR Series Thick Film Chip Resistors datasheet, REV. 03/21, p.2 (Recommended Pad Layout)</span></div><div class="info-item"><span class="info-label">Pads</span><span class="info-value">2 &middot; 0.475 &times; 0.5 mm, r 0 mm</span></div><div class="info-item"><span class="info-label">Body</span><span class="info-value">1 &times; 0.5 mm</span></div><div class="info-item"><span class="info-label">Courtyard</span><span class="info-value">2 &times; 1 mm</span></div>+    <div class="info-item"><span class="info-label">Desc</span><span class="info-value">Land pattern: Bourns CR Series Thick Film Chip Resistors datasheet, REV. 03/21, p.2 (Recommended Pad Layout: a 0.50, b 1.50, c 0.50, pad inner edge on the 0.25 mm bottom terminal)</span></div><div class="info-item"><span class="info-label">Pads</span><span class="info-value">2 &middot; 0.5 &times; 0.5 mm, r 0 mm</span></div><div class="info-item"><span class="info-label">Body</span><span class="info-value">1 &times; 0.5 mm</span></div><div class="info-item"><span class="info-label">Courtyard</span><span class="info-value">2 &times; 1 mm</span></div>   </div>   <div class="info-divider"></div>   <div class="coord-row">@@ -380,7 +380,7 @@ </div>  <script>-  const pads = [{"number": "1", "signal": "", "x": -0.5125, "y": 0.0, "width": 0.475, "height": 0.5, "shape": "roundrect", "mountType": "smd", "rotation": 0, "desc": ""}, {"number": "2", "signal": "", "x": 0.5125, "y": 0.0, "width": 0.475, "height": 0.5, "shape": "roundrect", "mountType": "smd", "rotation": 0, "desc": ""}];+  const pads = [{"number": "1", "signal": "", "x": -0.5, "y": 0.0, "width": 0.5, "height": 0.5, "shape": "roundrect", "mountType": "smd", "rotation": 0, "desc": ""}, {"number": "2", "signal": "", "x": 0.5, "y": 0.0, "width": 0.5, "height": 0.5, "shape": "roundrect", "mountType": "smd", "rotation": 0, "desc": ""}];   const svgW = 4;   const svgH = 3;   const svgVbX = 0;

@@ -67,9 +67,9 @@     "pads": [       {         "number": "1",-        "x_mm": -0.5125,+        "x_mm": -0.5,         "y_mm": 0.0,-        "w_mm": 0.475,+        "w_mm": 0.5,         "h_mm": 0.5,         "drill_mm": 0.0,         "rotation": 0.0,@@ -77,9 +77,9 @@       },       {         "number": "2",-        "x_mm": 0.5125,+        "x_mm": 0.5,         "y_mm": 0.0,-        "w_mm": 0.475,+        "w_mm": 0.5,         "h_mm": 0.5,         "drill_mm": 0.0,         "rotation": 0.0,

⋯ 1 unchanged line ⋯

@@ -2,7 +2,7 @@   (version 20240108)   (generator "adom-basic-parts-overhaul")   (layer "F.Cu")-  (descr "Bourns CR0402-FX-4700GLF, 0402. Land pattern from Bourns CR Series Thick Film Chip Resistors datasheet, REV. 03/21, p.2 (Recommended Pad Layout); corners: square, as the datasheet draws them")+  (descr "Bourns CR0402-FX-4700GLF, 0402. Land pattern from Bourns CR Series Thick Film Chip Resistors datasheet, REV. 03/21, p.2 (Recommended Pad Layout: a 0.50, b 1.50, c 0.50, pad inner edge on the 0.25 mm bottom terminal); corners: square, as the datasheet draws them")   (tags "0402")   (attr smd)   (fp_text reference "REF**" (at 0 -1.2) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))@@ -11,6 +11,6 @@   (fp_rect (start -0.5 -0.25) (end 0.5 0.25) (stroke (width 0.1) (type default)) (fill none) (layer "F.Fab"))   (fp_line (start -0.165 -0.36) (end 0.165 -0.36) (stroke (width 0.12) (type default)) (layer "F.SilkS"))   (fp_line (start -0.165 0.36) (end 0.165 0.36) (stroke (width 0.12) (type default)) (layer "F.SilkS"))-  (pad "1" smd rect (at -0.5125 0) (size 0.475 0.5) (layers "F.Cu" "F.Paste" "F.Mask"))-  (pad "2" smd rect (at 0.5125 0) (size 0.475 0.5) (layers "F.Cu" "F.Paste" "F.Mask"))+  (pad "1" smd rect (at -0.5 0) (size 0.5 0.5) (layers "F.Cu" "F.Paste" "F.Mask"))+  (pad "2" smd rect (at 0.5 0) (size 0.5 0.5) (layers "F.Cu" "F.Paste" "F.Mask")) )

@@ -53,9 +53,9 @@ <description>0402 Thick Film Resistor · 470 Ω ±1% · 1/16 W</description> <packages> <package name="CR0402-FX-4700GLF">-  <description>2 pads, 1.5 x 0.5 mm. Bourns CR0402-FX-4700GLF, 0402. Land pattern from Bourns CR Series Thick Film Chip Resistors datasheet, REV. 03/21, p.2 (Recommended Pad Layout); corners: square, as the datasheet draws them</description>-  <smd name="1" x="-0.5125" y="-0.0000" dx="0.4750" dy="0.5000" layer="1"/>-  <smd name="2" x="0.5125" y="-0.0000" dx="0.4750" dy="0.5000" layer="1"/>+  <description>2 pads, 1.5 x 0.5 mm. Bourns CR0402-FX-4700GLF, 0402. Land pattern from Bourns CR Series Thick Film Chip Resistors datasheet, REV. 03/21, p.2 (Recommended Pad Layout: a 0.50, b 1.50, c 0.50, pad inner edge on the 0.25 mm bottom terminal); corners: square, as the datasheet draws them</description>+  <smd name="1" x="-0.5000" y="-0.0000" dx="0.5000" dy="0.5000" layer="1"/>+  <smd name="2" x="0.5000" y="-0.0000" dx="0.5000" dy="0.5000" layer="1"/>   <wire x1="-0.5000" y1="0.2500" x2="0.5000" y2="0.2500" width="0.1000" layer="51"/>   <wire x1="0.5000" y1="0.2500" x2="0.5000" y2="-0.2500" width="0.1000" layer="51"/>   <wire x1="0.5000" y1="-0.2500" x2="-0.5000" y2="-0.2500" width="0.1000" layer="51"/>

@@ -31,10 +31,10 @@ Source: Land pattern from Bourns CR Series Thick Film Chip Resistors datasheet,  | mm | Datasheet | KiCad standard (R_0402_1005Metric) | Previous | This page | |---|---|---|---|---|-| Pad length (along the part) | 0.4 to 0.55 | 0.54 | 0.6 | 0.475 |+| Pad length (along the part) | 0.4 to 0.55 | 0.54 | 0.6 | 0.5 | | Pad width | 0.4 to 0.6 | 0.64 | 0.5 | 0.5 |-| Gap between pads | 0.5 to 0.6 | 0.48 | 0.4 | 0.55 |-| Centre to centre | 0.9 to 1.15 | 1.02 | 1 | 1.025 |+| Gap between pads | 0.5 to 0.6 | 0.48 | 0.4 | 0.5 |+| Centre to centre | 0.9 to 1.15 | 1.02 | 1 | 1 | | Overall | 1.4 to 1.6 | 1.56 | 1.6 | 1.5 | | Corner radius | not specified | 0.135 (ratio 0.25) | 0.125 (ratio 0.25) | square (as drawn) | Corners: square, as the datasheet draws them. The datasheet does not call for rounded corners, so the footprint does not add any.

⋯ 1 unchanged line ⋯

@@ -69,7 +69,7 @@     "glb": "CR0402-FX-4700GLF.glb",     "glb_sha256": "bb07fcf8807b751a1501ae77fab37b096fe59d47548a3537b6118e155b96f1b3",     "footprint": "CR0402-FX-4700GLF.kicad_mod",-    "footprint_sha256": "9c602774e10b4653ef283dbf3fca8bbf00d10ed53de13975481d74e17fed1bbf",+    "footprint_sha256": "1a4aa6bac99a8a713df6c46f01130c7ceeb7088e3dac1e8bf2693c83249a6d83",     "pins": "page.json component.pins",     "pins_sha256": "e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855"   },@@ -82,7 +82,7 @@       "y": 0.0,       "align": "right",       "vertical": false,-      "h": 0.332+      "h": 0.35     },     {       "pad": "2",@@ -91,7 +91,7 @@       "y": 0.0,       "align": "left",       "vertical": false,-      "h": 0.332+      "h": 0.35     }   ],   "pads": [@@ -99,11 +99,11 @@       "number": "1",       "shape": "rect",       "center_mm": [-        -0.5125,+        -0.5,         0.0       ],       "size_mm": [-        0.475,+        0.5,         0.5       ],       "rot": 0.0@@ -112,11 +112,11 @@       "number": "2",       "shape": "rect",       "center_mm": [-        0.5125,+        0.5,         0.0       ],       "size_mm": [-        0.475,+        0.5,         0.5       ],       "rot": 0.0

@@ -2,7 +2,7 @@   (version 20240108)   (generator "adom-basic-parts-overhaul")   (layer "F.Cu")-  (descr "Bourns CR0402-FX-4700GLF, 0402. Land pattern from Bourns CR Series Thick Film Chip Resistors datasheet, REV. 03/21, p.2 (Recommended Pad Layout); corners: datasheet silent; roundrect radius 0.1 mm = min(0.25 x smaller pad side, 0.1 mm), IPC-7351C rounded corners for paste release")+  (descr "Bourns CR0402-FX-4700GLF, 0402. Land pattern from Bourns CR Series Thick Film Chip Resistors datasheet, REV. 03/21, p.2 (Recommended Pad Layout: a 0.50, b 1.50, c 0.50, pad inner edge on the 0.25 mm bottom terminal); corners: square, as the datasheet draws them")   (tags "0402")   (attr smd)   (fp_text reference "REF**" (at 0 -1.2) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))@@ -11,6 +11,6 @@   (fp_rect (start -0.5 -0.25) (end 0.5 0.25) (stroke (width 0.1) (type default)) (fill none) (layer "F.Fab"))   (fp_line (start -0.165 -0.36) (end 0.165 -0.36) (stroke (width 0.12) (type default)) (layer "F.SilkS"))   (fp_line (start -0.165 0.36) (end 0.165 0.36) (stroke (width 0.12) (type default)) (layer "F.SilkS"))-  (pad "1" smd roundrect (at -0.5125 0) (size 0.475 0.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))-  (pad "2" smd roundrect (at 0.5125 0) (size 0.475 0.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+  (pad "1" smd roundrect (at -0.5 0) (size 0.5 0.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25))+  (pad "2" smd roundrect (at 0.5 0) (size 0.5 0.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25)) )

@@ -2,7 +2,7 @@   (version 20240108)   (generator "adom-basic-parts-overhaul")   (layer "F.Cu")-  (descr "Bourns CR0402-FX-4700GLF, 0402. Land pattern from Bourns CR Series Thick Film Chip Resistors datasheet, REV. 03/21, p.2 (Recommended Pad Layout); corners: square, as the datasheet draws them")+  (descr "Bourns CR0402-FX-4700GLF, 0402. Land pattern from Bourns CR Series Thick Film Chip Resistors datasheet, REV. 03/21, p.2 (Recommended Pad Layout: a 0.50, b 1.50, c 0.50, pad inner edge on the 0.25 mm bottom terminal); corners: square, as the datasheet draws them")   (tags "0402")   (attr smd)   (fp_text reference "REF**" (at 0 -1.2) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))@@ -11,6 +11,6 @@   (fp_rect (start -0.5 -0.25) (end 0.5 0.25) (stroke (width 0.1) (type default)) (fill none) (layer "F.Fab"))   (fp_line (start -0.165 -0.36) (end 0.165 -0.36) (stroke (width 0.12) (type default)) (layer "F.SilkS"))   (fp_line (start -0.165 0.36) (end 0.165 0.36) (stroke (width 0.12) (type default)) (layer "F.SilkS"))-  (pad "1" smd rect (at -0.5125 0) (size 0.475 0.5) (layers "F.Cu" "F.Paste" "F.Mask"))-  (pad "2" smd rect (at 0.5125 0) (size 0.475 0.5) (layers "F.Cu" "F.Paste" "F.Mask"))+  (pad "1" smd rect (at -0.5 0) (size 0.5 0.5) (layers "F.Cu" "F.Paste" "F.Mask"))+  (pad "2" smd rect (at 0.5 0) (size 0.5 0.5) (layers "F.Cu" "F.Paste" "F.Mask")) )