by adom
0402 Thick Film Resistor · 10 kΩ ±1% · 1/16 W
← Commit history
Footprint per the manufacturer's land pattern (redrawn), derived viewers/lbr/hero rebuilt, lbr-hover on both viewers, README.md replaces README.html, assembly animation in docs/assembly.md, chip outline and symbol options
2 files changed
−14
CHANGES.md−12@@ -27,7 +27,6 @@ John: chip-laser-etch every component we put on the wiki; the best STEP, with th - MPN is 17 characters on a 1.0 mm part: the service font is 0.054 mm tall. Readable in the hero PNG and when zoomed; on the page viewer at default zoom it will look like a thin line. - All six CR0402 pages share the identical KiCad R_0402 model; only the mark differs. - # CR0402-FX-1002GLF: footprint, hover and README pass (2026-10-03) John: footprints follow the manufacturer's land pattern; README.md replaces README.html; the assembly animation moves to a sub-readme.@@ -38,14 +37,3 @@ John: footprints follow the manufacturer's land pattern; README.md replaces READ - README.html removed (it repeated the native Symbol & Footprint viewers); README.md rewritten; `docs/assembly.md` + `docs/assembly.html` carry the pick-and-place animation; `docs/datasheet.md` the datasheet pages. - New: `CR0402-FX-1002GLF-outline.kicad_sym`, `artwork/CR0402-FX-1002GLF-3d-outline-blueprint-named.svg`, `artwork/CR0402-FX-1002GLF-3d-outline-dark-named.svg`, `artwork/CR0402-FX-1002GLF-3d-outline-ink-heavy-named.svg`, `artwork/CR0402-FX-1002GLF-3d-outline-teal-named.svg`, `artwork/CR0402-FX-1002GLF-thumbs.json`, `cr0402-fx-1002glf-hero.overlay.json`, `docs/assembly.html`, `docs/assembly.md`, `docs/datasheet.md`, `footprint-variants/CR0402-FX-1002GLF-RR25.kicad_mod`, `footprint-variants/CR0402-FX-1002GLF-SQ.kicad_mod`, `footprint-variants/CR0402-FX-1002GLF.kicad_mod`, `footprint-variants/CR0402-FX-1002GLF.variants.json` - Removed: `README.html`--# CR0402-FX-1002GLF: footprint, hover and README pass (2026-10-03)--John: footprints follow the manufacturer's land pattern; README.md replaces README.html; the assembly animation moves to a sub-readme.--- Footprint: redrawn. Land pattern from Bourns CR Series Thick Film Chip Resistors datasheet, REV. 03/21, p.2 (Recommended Pad Layout). Pads 0.475 x 0.5 mm, centre to centre 1.025 mm, corner radius 0.1 mm.-- Rebuilt from the footprint: `CR0402-FX-1002GLF-fpview.html` (and the lbr-hover bus on both viewers), `CR0402-FX-1002GLF.lbr`, `CR0402-FX-1002GLF.adom-lbr.json`, the hero GLB, and the pads / solder / silk in `CR0402-FX-1002GLF.insertion.glb`.-- Etched STEP: kept.-- README.html removed (it repeated the native Symbol & Footprint viewers); README.md rewritten; `docs/assembly.md` + `docs/assembly.html` carry the pick-and-place animation; `docs/datasheet.md` the datasheet pages.-- New: none-- Removed: none
docs/assembly.md−2@@ -2,8 +2,6 @@ A small 3D scene of CR0402-FX-1002GLF on a test board. **Static** lowers the part onto its pads; **Pick & Place** shows Adom's pick-and-place nozzle lifting it out of the carrier tape (pocket sizes from the datasheet) and placing it. The board is a thick illustrative slab, not a real stack-up, and the pads in the scene follow this page's footprint. -- [Open the animation](https://wiki.adom.inc/adom/cr0402-fx-1002glf/render/docs/assembly.html) (drag to orbit, scroll to zoom; the buttons switch between Static and Pick & Place). The scene is `docs/assembly.html`, which loads `CR0402-FX-1002GLF.insertion.glb` from this page.