10 kΩ Resistor 0402 - Bourns CR0402-FX-1002GLF

@@ -18,7 +18,7 @@  ## Notes for designers -The datasheet’s 1 A current rating applies to the **zero-ohm jumper**, not this 10 kΩ resistor. For this value, enforce both power and voltage limits: at70°C the nominal62.5mW power bound is about2.5mA or25V, before resistance tolerance and design margin. Reduce allowable power above70°C. [Bourns CR-series datasheet, electrical characteristics](https://www.bourns.com/docs/product-datasheets/cr.pdf).+The datasheet’s 1 A current rating applies to the **zero-ohm jumper**, not this 10 kΩ resistor. For this value, enforce both power and voltage limits: at 70 °C the nominal 62.5 mW power bound is about 2.5 mA or 25 V, before resistance tolerance and design margin. Reduce allowable power above 70 °C. [Bourns CR-series datasheet, electrical characteristics](https://www.bourns.com/docs/product-datasheets/cr.pdf).  CR0402-FX-1002GLF is the 10 kΩ member of Bourns’ CR series of general-purpose thick film chip resistors, in the 0402 size, a 1.00 × 0.50 mm body just 0.32 mm thick, built on a three-layer termination with a nickel barrier under the tin plating. (p.2, p.1) Tolerance is ±1 %, and like every CR0402 the top carries no marking, the value travels in the ordering code (1002 → 10 kΩ, 3 significant digits + 2 zeros), not on the part. (p.1, p.5, p.6)