COSTS3USB30E

{
  "slug": "costs3usb30e",
  "version": "0.1.0",
  "type": "component",
  "description": "COSINE Analog Switches, Multiplexers, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "costs3usb30e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "costs3usb30e.kicad_sym",
    "costs3usb30e.kicad_mod",
    "costs3usb30e.glb",
    "costs3usb30e.step",
    "costs3usb30e.lbr",
    "docs/hero.png",
    "docs/costs3usb30e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "costs3usb30e-hero.glb",
    "costs3usb30e-hero.overlay.json",
    "costs3usb30e-etched.glb"
  ],
  "component": {
    "mpn": "COSTS3USB30E",
    "manufacturer": "COSINE",
    "package": "MSOP-10",
    "pin_count": 10,
    "category": "Interface",
    "subcategory": "Analog Switches, Multiplexers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/1afc40bf7a6bc3325eec7311cb451d9b.pdf",
    "parts": {
      "symbol": "costs3usb30e.kicad_sym",
      "footprint": "costs3usb30e.kicad_mod",
      "model_3d": "costs3usb30e-hero.glb",
      "model_3d_plain": "costs3usb30e-etched.glb",
      "model_3d_step": "costs3usb30e-etched.step",
      "model_3d_step_plain": "costs3usb30e.step",
      "lbr": "costs3usb30e.lbr"
    },
    "distributor_links": {
      "lcsc": "C41368096"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T03:34:59Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "S",
        "type": "input",
        "description": "Select input that sets the DPDT path per the truth table; digital input thresholds are VIH 2.4 V min and VIL 0.8 V max."
      },
      {
        "number": "2",
        "name": "D1+",
        "type": "bidirectional",
        "description": "USB signal path port 1 (positive); analog signal range is 0 V to VCC and the switch conducts equally well in both directions when on."
      },
      {
        "number": "3",
        "name": "D2+",
        "type": "bidirectional",
        "description": "USB signal path port 2 (positive); analog signal range is 0 V to VCC and the switch conducts equally well in both directions when on."
      },
      {
        "number": "4",
        "name": "D+",
        "type": "bidirectional",
        "description": "Common USB signal path (positive) that connects to D1+ or D2+ depending on S, with rail-to-rail operation up to VCC."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device."
      },
      {
        "number": "6",
        "name": "D-",
        "type": "bidirectional",
        "description": "Common USB signal path (negative) that connects to D1- or D2- depending on S, with rail-to-rail operation up to VCC."
      },
      {
        "number": "7",
        "name": "D2-",
        "type": "bidirectional",
        "description": "USB signal path port 2 (negative); analog signal range is 0 V to VCC and the switch conducts equally well in both directions when on."
      },
      {
        "number": "8",
        "name": "D1-",
        "type": "bidirectional",
        "description": "USB signal path port 1 (negative); analog signal range is 0 V to VCC and the switch conducts equally well in both directions when on."
      },
      {
        "number": "9",
        "name": "OE",
        "type": "input",
        "description": "Output enable input; when driven high both switch paths are set OFF (high impedance) per the truth table, with the same VIH 2.4 V min and VIL 0.8 V max logic levels as S."
      },
      {
        "number": "10",
        "name": "VCC",
        "type": "power_in",
        "description": "Power supply, 1.8 V to 5.5 V single supply per recommended operating conditions."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The pin diagram (figure) on page 2 is not present in the extracted text, so the pin-to-position mapp; Pin types for the D-pins are marked I/O in the datasheet and are mapped to KiCad bidirectional; the "
        ],
        "pages_sent": 9,
        "cost_usd": 0.0355,
        "at": "2026-10-19T03:32:42"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/1afc40bf7a6bc3325eec7311cb451d9b.pdf",
        "pages": 9,
        "sha256": "056f33b25b298b83",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "costs3usb30e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "costs3usb30e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "43cbc771a06fe4109fb96e26bc3d46290321cac49f076c8efa1d53c21707ce48",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}