component
COS8091SOT
Public Made by Adomby adom
COSINE Operational Amplifier, SOT23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownCOS8091SOT
COSINE · Operational Amplifier · SOT23-5
COS8091SOT from COSINE, in a SOT23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Amplifier output. Output voltage swing extends to within millivolts of each supply rail (10 mV at RL=10 kΩ, 25 mV at RL=2 kΩ, 200 mV at RL=150 Ω). |
| 2 | -Vs | power_in | Negative power supply or ground. For single-supply operation tie to GND; for dual-supply operation bypass with a 0.1 µF ceramic capacitor placed as close to the pin as possible. |
| 3 | +IN | input | Non-inverting input of the amplifier. Common-mode voltage range is -Vs to +Vs (rail-to-rail); absolute input pin voltage range is -Vs -0.3 V to +Vs +0.3 V. |
| 4 | -IN | input | Inverting input of the amplifier. Voltage range at this pin is -Vs -0.3 V to +Vs +0.3 V; input bias current is typically ±3 pA. |
| 5 | +Vs | power_in | Positive power supply, 2.5 V to 5.5 V single-supply (or ±1.25 V to ±2.25 V dual-supply). Bypass with a 0.1 µF ceramic capacitor placed as close to the pin as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | COSINE |
| Package | SOT23-5 |
| Category | Op-amp/Cmp |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
COS8091SOTCOS8091SOTSR
CAD (KiCad official)
- Symbol:
COS8091SOT - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT23-5 (KiCad packages3D, STEP)
- 3D model files:
cos8091sot-etched.step/cos8091sot-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cos8091sot.step/cos8091sot.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: COSINE datasheet (10 pp, sha256
b0fffdb283775e7b, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).