3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCOS2333MRA
COSINE · Precision Op Amps · MSOP-8
COS2333MRA from COSINE, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output of amplifier 1; rail-to-rail output, voltage swing extends to within millivolts of each supply rail; short-circuit current ±7 mA. |
| 2 | -IN1 | input | Inverting input of amplifier 1; input voltage range -Vs−0.3 V to +Vs+0.3 V; input bias current ±25 pA typ, ±100 pA max. |
| 3 | +IN1 | input | Non-inverting input of amplifier 1; input voltage range -Vs−0.3 V to +Vs+0.3 V; same range as −IN1. |
| 4 | -Vs | power_in | Negative power supply or ground; bypass with 0.1 µF ceramic capacitor placed as close to the pin as possible; supply range -Vs to +Vs = 1.8 V to 5.5 V. |
| 5 | +IN2 | input | Non-inverting input of amplifier 2; input voltage range -Vs−0.3 V to +Vs+0.3 V; same range as −IN2. |
| 6 | -IN2 | input | Inverting input of amplifier 2; input voltage range -Vs−0.3 V to +Vs+0.3 V; input bias current ±25 pA typ, ±100 pA max. |
| 7 | OUT2 | output | Output of amplifier 2; rail-to-rail output, voltage swing extends to within millivolts of each supply rail; short-circuit current ±7 mA. |
| 8 | +Vs | power_in | Positive power supply; operating range 1.8 V to 5.5 V; bypass with 0.1 µF ceramic capacitor placed as close to the pin as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | COSINE |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 5 | 50 | µV | 4 | ||
| Input Offset Voltage Drift | ΔVOS/ΔT | 0.005 | 0.05 | µV/°C | -40 to 125°C | 4 | |
| Input Bias Current | IB | 25 | 100 | pA | 4 | ||
| Input Offset Current | IOS | 10 | 70 | pA | 4 | ||
| Common-Mode Voltage Range | VCM | -0.1 | 5.6 | V | VS = 5.5V | 4 | |
| Common-Mode Rejection Ratio | CMRR | 120 | dB | VCM =0.1V to 4.9V | 4 | ||
| Open-Loop Voltage Gain | AOL | 145 | dB | VO=0.2V to 4.8V | 4 | ||
| Output Voltage Swing from Rail | 5 | mV | RL=100kΩ | 4 | |||
| Output Voltage Swing from Rail | 15 | mV | RL=10kΩ | 4 | |||
| Short-Circuit Current, sourcing | ISR | 7 | mA | Sourcing | 4 | ||
| Short-Circuit Current, sinking | ISK | -7 | mA | Sinking | 4 | ||
| Operating Voltage Range | 1.8 | 5.5 | V | 4 | |||
| Power Supply Rejection Ratio | PSRR | 80 | 100 | dB | VS = 1.8V to 5.5V | 4 | |
| Quiescent Current per Amplifier | IQ | 18 | µA | VS = 1.8V | 4 | ||
| Gain Bandwidth Product | GBWP | 350 | kHz | G=+1 | 4 | ||
| Slew Rate | SR | 0.2 | V/µs | G = +1, 2V Output Step | 5 | ||
| Voltage Noise Density | en | 70 | nV/√Hz | f=1kHz | 5 | ||
| Power Supply Voltage (+Vs to -Vs) | 6 | V | 3 | ||||
| Input Current | 10 | mA | 3 | ||||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Operating Temperature Range | -40 | 125 | °C | 3 | |||
| ESD Susceptibility, HBM | 2000 | V | HBM | 3 | |||
| DC Supply Voltage | 1.8 | 5.5 | V | 3 | |||
| Operating Ambient Temperature | -40 | 85 | °C | 3 | |||
| Package Thermal Resistance, junction-to-ambient (MSOP8) | 206 | °C/W | MSOP8 package | 3 |
CAD (KiCad official)
- Symbol:
COS2333MRA - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
cos2333mra-etched.step/cos2333mra-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cos2333mra.step/cos2333mra.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: COSINE datasheet (12 pp, sha256
2acac72bb6342020, retrieved 2026-09-29, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).