component
COS227U
Public Made by Adomby adom
COSINE Precision Op Amps, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
COS227U
COSINE · Precision Op Amps · MSOP-8
COS227U from COSINE, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | -IN | input | Inverting input of the amplifier; voltage range can go from -Vs to +Vs. |
| 3 | +IN | input | Non-inverting input of the amplifier; same voltage range as -IN. |
| 4 | -Vs | power_in | Negative power supply or ground; if not connected to ground, bypass with a 0.1μF capacitor placed as close to the part as possible. |
| 5 | NC | unconnected | No connection. |
| 6 | OUT | output | Amplifier output; the output voltage range extends to within millivolts of each supply rail. |
| 7 | +Vs | power_in | Positive power supply; place a 0.1μF bypass capacitor as close to the part as possible. |
| 8 | NC | unconnected | No connection. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | COSINE |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -50 | 15 | 50 | μV | 4 | |
| Input Offset Voltage Drift | ΔVOS/ΔT | 0.2 | 0.7 | μV/°C | -40 to 125°C | 4 | |
| Input Bias Current | IB | -5 | 0.5 | 5 | nA | 4 | |
| Input Offset Current | IOS | -2 | 0.2 | 2 | nA | 4 | |
| Common-Mode Voltage Range | VCM | 13 | 14 | V | 4 | ||
| Common-Mode Rejection Ratio | CMRR | 120 | 125 | dB | 4 | ||
| Open-Loop Voltage Gain | AOL | 100 | 120 | dB | RL ≥ 2kΩ, VO = ±10V | 4 | |
| Output Voltage High | VOH | 14 | 14.1 | V | 4 | ||
| Output Voltage Low | VOL | -14.1 | -13.9 | V | 4 | ||
| Output Current | IOUT | -10 | 10 | mA | VDROPOUT < 1.2 V | 4 | |
| Short-Circuit Current | ISC | -28 | 28 | mA | 4 | ||
| Operating Voltage Range | 2.5 | 18 | V | 4 | |||
| Power Supply Rejection Ratio | PSRR | 120 | 130 | dB | 4 | ||
| Quiescent Current / Amplifier | IQ | 1.3 | 1.6 | mA | 4 | ||
| Power Supply: +Vs to -Vs | 36 | V | 3 | ||||
| Output Current | 50 | mA | 3 | ||||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Operating Temperature Range | -40 | 125 | °C | 3 | |||
| ESD Susceptibility, HBM | 2000 | V | 3 | ||||
| DC Supply Voltage | 2.5 | 18 | V | 3 | |||
| Operating ambient temperature | -40 | 85 | °C | 3 | |||
| Gain Bandwidth Product | GBWP | 10 | MHz | CL=100pF, RL=10kΩ | 4 | ||
| Slew Rate | SR | 3 | V/μs | CL=100pF, RL=10kΩ, Av=1 | 4 | ||
| Voltage Noise Density | en | 6 | nV/√Hz | f=1kHz | 4 | ||
| Package Thermal Resistance, junction-to-ambient (MSOP8) | RθJA | 206 | °C/W | MSOP8 package | 3 |
CAD (KiCad official)
- Symbol:
COS227U - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
cos227u-etched.step/cos227u-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cos227u.step/cos227u.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: COSINE datasheet (9 pp, sha256
8fff730ecc732c82, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# COS227U
**COSINE** · Precision Op Amps · MSOP-8
COS227U from COSINE, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connection. |
| 2 | -IN | input | Inverting input of the amplifier; voltage range can go from -Vs to +Vs. |
| 3 | +IN | input | Non-inverting input of the amplifier; same voltage range as -IN. |
| 4 | -Vs | power_in | Negative power supply or ground; if not connected to ground, bypass with a 0.1μF capacitor placed as close to the part as possible. |
| 5 | NC | unconnected | No connection. |
| 6 | OUT | output | Amplifier output; the output voltage range extends to within millivolts of each supply rail. |
| 7 | +Vs | power_in | Positive power supply; place a 0.1μF bypass capacitor as close to the part as possible. |
| 8 | NC | unconnected | No connection. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | COSINE |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -50 | 15 | 50 | μV | | 4 |
| Input Offset Voltage Drift | ΔVOS/ΔT | | 0.2 | 0.7 | μV/°C | -40 to 125°C | 4 |
| Input Bias Current | IB | -5 | 0.5 | 5 | nA | | 4 |
| Input Offset Current | IOS | -2 | 0.2 | 2 | nA | | 4 |
| Common-Mode Voltage Range | VCM | 13 | 14 | | V | | 4 |
| Common-Mode Rejection Ratio | CMRR | 120 | 125 | | dB | | 4 |
| Open-Loop Voltage Gain | AOL | 100 | 120 | | dB | RL ≥ 2kΩ, VO = ±10V | 4 |
| Output Voltage High | VOH | 14 | 14.1 | | V | | 4 |
| Output Voltage Low | VOL | -14.1 | -13.9 | | V | | 4 |
| Output Current | IOUT | -10 | | 10 | mA | VDROPOUT < 1.2 V | 4 |
| Short-Circuit Current | ISC | -28 | | 28 | mA | | 4 |
| Operating Voltage Range | | 2.5 | | 18 | V | | 4 |
| Power Supply Rejection Ratio | PSRR | 120 | 130 | | dB | | 4 |
| Quiescent Current / Amplifier | IQ | | 1.3 | 1.6 | mA | | 4 |
| Power Supply: +Vs to -Vs | | | | 36 | V | | 3 |
| Output Current | | | | 50 | mA | | 3 |
| Storage Temperature Range | | -65 | | 150 | °C | | 3 |
| Junction Temperature | | | | 150 | °C | | 3 |
| Operating Temperature Range | | -40 | | 125 | °C | | 3 |
| ESD Susceptibility, HBM | | | | 2000 | V | | 3 |
| DC Supply Voltage | | 2.5 | | 18 | V | | 3 |
| Operating ambient temperature | | -40 | | 85 | °C | | 3 |
| Gain Bandwidth Product | GBWP | | 10 | | MHz | CL=100pF, RL=10kΩ | 4 |
| Slew Rate | SR | | 3 | | V/μs | CL=100pF, RL=10kΩ, Av=1 | 4 |
| Voltage Noise Density | en | | 6 | | nV/√Hz | f=1kHz | 4 |
| Package Thermal Resistance, junction-to-ambient (MSOP8) | RθJA | | 206 | | °C/W | MSOP8 package | 3 |
## CAD (KiCad official)
- Symbol: `COS227U`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `cos227u-etched.step` / `cos227u-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cos227u.step` / `cos227u.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [COSINE datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590230695601221632) (9 pp, sha256 `8fff730ecc732c82`, retrieved 2026-10-20, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cos227u-datasheet.pdf)