component
COS2177MR
Public Made by Adomby adom
COSINE Precision Op Amps, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCOS2177MR
COSINE · Precision Op Amps · MSOP-8
COS2177MR from COSINE, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Channel 1 output; the output voltage range extends to within millivolts of each supply rail. |
| 2 | -IN1 | input | Channel 1 inverting input; voltage range can go from -Vs to +Vs. |
| 3 | +IN1 | input | Channel 1 non-inverting input; same voltage range as -IN (-Vs to +Vs). |
| 4 | -Vs | power_in | Negative power supply or ground; if not connected to ground, bypass with a 0.1µF capacitor placed as close to the part as possible. |
| 5 | +IN2 | input | Channel 2 non-inverting input; same voltage range as -IN (-Vs to +Vs). |
| 6 | -IN2 | input | Channel 2 inverting input; voltage range can go from -Vs to +Vs. |
| 7 | OUT2 | output | Channel 2 output; the output voltage range extends to within millivolts of each supply rail. |
| 8 | +Vs | power_in | Positive power supply; place a 0.1µF bypass capacitor as close to the part as possible between supply pins or between supply pins and ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | COSINE |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -50 | 15 | 50 | µV | Row: COS1177SR, 1177MR, COS2177SR, 2177MR/U | 4 |
| Input Offset Voltage Drift | ΔVOS/ΔT | 0.2 | 0.7 | µV/°C | -40 to 125°C | 4 | |
| Input Bias Current | IB | -7 | 0.5 | 7 | nA | 4 | |
| Input Offset Current | IOS | -7 | 0.5 | 7 | nA | 4 | |
| Common-Mode Voltage Range | VCM | 13 | 14 | V | 4 | ||
| Common-Mode Rejection Ratio | CMRR | 110 | 125 | dB | 4 | ||
| Open-Loop Voltage Gain | AOL | 90 | 120 | dB | RL ≥ 2kΩ, VO = ±10V | 4 | |
| Output Voltage High | VOH | 14 | 14.1 | V | 4 | ||
| Output Voltage Low | VOL | -14.1 | -13.9 | V | 4 | ||
| Output Current | IOUT | -10 | 10 | mA | VDROPOUT < 1.2 V | 4 | |
| Short-Circuit Current | ISC | -28 | 28 | mA | 4 | ||
| Operating Voltage Range | 2.5 | 18 | V | 4 | |||
| Power Supply Rejection Ratio | PSRR | 120 | 130 | dB | 4 | ||
| Quiescent Current per Amplifier | IQ | 330 | 530 | µA | 4 | ||
| Absolute Maximum Power Supply +Vs to -Vs | 36 | V | 3 | ||||
| Absolute Maximum Output Current | 50 | mA | 3 | ||||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Junction Temperature | 150 | °C | 3 | ||||
| Absolute Maximum Operating Temperature Range | -40 | 125 | °C | 3 | |||
| ESD Susceptibility HBM | 2000 | V | HBM | 3 | |||
| Recommended DC Supply Voltage | 2.5 | 18 | V | 3 | |||
| Recommended Operating Ambient Temperature | -40 | 85 | °C | 3 | |||
| Thermal Resistance Junction-to-Ambient | RθJA | 206 | °C/W | MSOP8 package | 3 | ||
| Gain Bandwidth Product | GBWP | 2 | MHz | CL=100pF, RL=10kΩ | 4 | ||
| Slew Rate | SR | 0.7 | V/µs | CL=100pF, RL=10kΩ, Av=1 | 4 | ||
| Voltage Noise Density | en | 8 | nV/√Hz | f=1kHz | 4 |
CAD (KiCad official)
- Symbol:
COS2177MR - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
cos2177mr-etched.step/cos2177mr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cos2177mr.step/cos2177mr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: COSINE datasheet (9 pp, sha256
081dec7544ce6bdd, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).