component
COS128C
Public Made by Adomby adom
COSINE Instrumentation Amplifiers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
COS128C
COSINE · Instrumentation Amplifiers · SOP-8
COS128C from COSINE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RG | passive | Gain setting pin. For gains greater than 1, place a gain resistor between pin 1 and pin 8. |
| 2 | VIN- | power_in | Negative input of the instrumentation amplifier. |
| 3 | VIN+ | power_in | Positive input of the instrumentation amplifier. |
| 4 | -VS | power_in | Negative supply; the operating voltage range is ±2.25V to ±18V (dual supply) per the recommended operating conditions. |
| 5 | REF | input | Reference input. This pin must be driven by low impedance or connected to ground. |
| 6 | VOUT | output | Output of the instrumentation amplifier. |
| 7 | +VS | power_in | Positive supply; the operating voltage range is ±2.25V to ±18V (dual supply) per the recommended operating conditions. |
| 8 | RG | passive | Gain setting pin. For gains greater than 1, place a gain resistor between pin 8 and pin 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | COSINE |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -250 | 50 | 250 | μV | 3 | |
| Input Offset Voltage Drift | ΔVOS/ΔT | 0.2 | 0.7 | μV/°C | -40 to 125°C | 3 | |
| Input Bias Current | IB | -2 | 0.5 | 2 | nA | 3 | |
| Input Offset Current | IOS | -1 | 0.2 | 1 | nA | 3 | |
| Common-Mode Rejection Ratio | CMRR | 120 | 125 | dB | 3 | ||
| Open-Loop Voltage Gain | AOL | 100 | 120 | dB | RL ≥ 2kΩ, VO = ±10V | 3 | |
| Output Current | IOUT | -10 | 10 | mA | VDROPOUT < 1.2 V | 4 | |
| Short-Circuit Current | ISC | -24 | 24 | mA | 4 | ||
| Operating Voltage Range | 2.25 | 18 | V | 4 | |||
| Power Supply Rejection Ratio | PSRR | 110 | 120 | dB | 4 | ||
| Quiescent Current / Amplifier | IQ | 1 | 1.3 | mA | 4 | ||
| Gain Bandwidth Product | GBWP | 1.5 | MHz | CL=100pF, RL=10kΩ | 4 | ||
| Slew Rate | SR | 1 | V/μs | CL=100pF, RL=10kΩ, Av=1 | 4 | ||
| Voltage Noise Density | en | 8 | nV/√Hz | f=1kHz | 4 | ||
| Power Supply: +Vs to -Vs (absolute maximum) | 36 | V | 2 | ||||
| Differential Input Voltage Range (absolute maximum) | -36 | 36 | V | 2 | |||
| Output Current (absolute maximum) | 50 | mA | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| ESD Susceptibility, HBM | 2000 | V | HBM | 2 | |||
| DC Supply Voltage | 2.5 | 18 | V | 3 | |||
| Operating ambient temperature | -40 | 125 | °C | 3 | |||
| Package Thermal Resistance (SOP8) | 155 | °C/W | SOP8 | 3 |
CAD (KiCad official)
- Symbol:
COS128C - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
cos128c-etched.step/cos128c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cos128c.step/cos128c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: COSINE datasheet (8 pp, sha256
e8053a974fc97ff4, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# COS128C
**COSINE** · Instrumentation Amplifiers · SOP-8
COS128C from COSINE, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RG | passive | Gain setting pin. For gains greater than 1, place a gain resistor between pin 1 and pin 8. |
| 2 | VIN- | power_in | Negative input of the instrumentation amplifier. |
| 3 | VIN+ | power_in | Positive input of the instrumentation amplifier. |
| 4 | -VS | power_in | Negative supply; the operating voltage range is ±2.25V to ±18V (dual supply) per the recommended operating conditions. |
| 5 | REF | input | Reference input. This pin must be driven by low impedance or connected to ground. |
| 6 | VOUT | output | Output of the instrumentation amplifier. |
| 7 | +VS | power_in | Positive supply; the operating voltage range is ±2.25V to ±18V (dual supply) per the recommended operating conditions. |
| 8 | RG | passive | Gain setting pin. For gains greater than 1, place a gain resistor between pin 8 and pin 1. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | COSINE |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -250 | 50 | 250 | μV | | 3 |
| Input Offset Voltage Drift | ΔVOS/ΔT | | 0.2 | 0.7 | μV/°C | -40 to 125°C | 3 |
| Input Bias Current | IB | -2 | 0.5 | 2 | nA | | 3 |
| Input Offset Current | IOS | -1 | 0.2 | 1 | nA | | 3 |
| Common-Mode Rejection Ratio | CMRR | 120 | 125 | | dB | | 3 |
| Open-Loop Voltage Gain | AOL | 100 | 120 | | dB | RL ≥ 2kΩ, VO = ±10V | 3 |
| Output Current | IOUT | -10 | | 10 | mA | VDROPOUT < 1.2 V | 4 |
| Short-Circuit Current | ISC | -24 | | 24 | mA | | 4 |
| Operating Voltage Range | | 2.25 | | 18 | V | | 4 |
| Power Supply Rejection Ratio | PSRR | 110 | 120 | | dB | | 4 |
| Quiescent Current / Amplifier | IQ | | 1 | 1.3 | mA | | 4 |
| Gain Bandwidth Product | GBWP | | 1.5 | | MHz | CL=100pF, RL=10kΩ | 4 |
| Slew Rate | SR | | 1 | | V/μs | CL=100pF, RL=10kΩ, Av=1 | 4 |
| Voltage Noise Density | en | | 8 | | nV/√Hz | f=1kHz | 4 |
| Power Supply: +Vs to -Vs (absolute maximum) | | | | 36 | V | | 2 |
| Differential Input Voltage Range (absolute maximum) | | -36 | | 36 | V | | 2 |
| Output Current (absolute maximum) | | | | 50 | mA | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Junction Temperature | | | | 150 | °C | | 2 |
| Operating Temperature Range | | -40 | | 125 | °C | | 2 |
| ESD Susceptibility, HBM | | | | 2000 | V | HBM | 2 |
| DC Supply Voltage | | 2.5 | | 18 | V | | 3 |
| Operating ambient temperature | | -40 | | 125 | °C | | 3 |
| Package Thermal Resistance (SOP8) | | | 155 | | °C/W | SOP8 | 3 |
## CAD (KiCad official)
- Symbol: `COS128C`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `cos128c-etched.step` / `cos128c-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cos128c.step` / `cos128c.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [COSINE datasheet](docs/cos128c-datasheet.pdf) (8 pp, sha256 `e8053a974fc97ff4`, retrieved 2026-10-27, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cos128c-datasheet.pdf)