CN825Z

{
 "schema": "adom.pads/1",
 "slug": "cn825z",
 "footprint": "SOT-23-6",
 "generated_from": {
  "footprint": "SOT-23-6@sha256:f341c73aac9dcb55",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -1.1375,
   -0.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-23-6@sha256:f341c73aac9dcb55"
 },
 "pad_count": 6,
 "symbol_pins": [
  "1",
  "2",
  "3",
  "4",
  "5",
  "6"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "/MR",
   "type": "input",
   "description": "Manual reset input, active-low. Pulling this pin low triggers a reset pulse on both RESET outputs. Internally pulled up to VCC via 50 kΩ (38-62 kΩ), so it may be left floating when unused. Can be driven by CMOS, open-drain, or open-collector; a contact switch to GND is sufficient (no external debounce needed). /MR pulse width min 1 µs; /MR-to-reset delay max 500 ns.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "GND",
   "type": "power_in",
   "description": "Ground / negative supply return.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "/RESET",
   "type": "output",
   "description": "Active-low reset output. Driven low whenever VCC is below the reset threshold (2.32V typ. for CN825Z), /MR is low, or the watchdog timer overflows. Once the fault clears, /RESET remains low for at least 140 ms (200 ms typ.) before releasing high. VOL=0.3V max at ISINK=3.2 mA; guaranteed valid down to VCC=1.1V (VOL=0.3V max at ISINK=150 µA).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "VCC",
   "type": "power_in",
   "description": "Positive supply input; also the monitored voltage. Operating range 1.1V to 6.5V (abs-max 6.5V). Continuously compared against the internal 2.32V reset threshold (CN825Z, ±1%). Supply current 2.7 µA typ. below threshold, 16 µA typ. above threshold.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "RESET",
   "type": "output",
   "description": "Active-high reset output. Driven high whenever VCC is below the reset threshold, /MR is low, or the watchdog timer overflows. Once the fault clears, RESET stays high for at least 140 ms (200 ms typ.) before returning low. VOH=VCC-1V min at ISOURCE=1 mA; guaranteed valid down to VCC=1.1V (VOH=1.0V at ISOURCE=8 µA).",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "WDI",
   "type": "input",
   "description": "Watchdog input. Must toggle (high-to-low or low-to-high) within the watchdog timeout (0.95 s min, 1.6 s typ., 2.25 s max) or the watchdog overflows and asserts reset on both outputs. Minimum WDI pulse width 50 ns; input leakage ±50 nA; thresholds 0.25*VCC (low) / 0.75*VCC (high). Watchdog is held cleared while VCC is below threshold or /MR is low.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-6.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}