component
CN810T
Public Made by Adomby adom
ShangHai Consonance Elec Supervisor And Reset ICs, SOT-23-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
CN810T
ShangHai Consonance Elec · Supervisor And Reset ICs · SOT-23-3
CN810T from ShangHai Consonance Elec, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the supervisor circuit, as shown in the pinout diagram of the SOT23-3 package. |
| 2 | RESET | output | CMOS reset output for the CN810T, active high: it is driven high while VCC is below the reset threshold VRES (3.08V typ for CN810T) and stays high for at least 140 ms after VCC rises above VRES + VHYST, then goes low. |
| 3 | VCC | power_in | Positive supply input that powers the internal circuit and is also the voltage being monitored; the datasheet gives an absolute maximum of -0.3V to +6.0V relative to GND and an operating minimum of 1.15V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ShangHai Consonance Elec |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| RESET output low voltage (CN810), VRES<VCC=3V | VOL | 0.3 | V | VRES<VCC=3V, ISINK=3.2mA | 4 | ||
| RESET output low voltage (CN810), VRES<VCC=4V | VOL | 0.3 | V | VRES<VCC=4V, ISINK=5mA | 4 | ||
| RESET output low voltage (CN810), VRES<VCC=5V | VOL | 0.3 | V | VRES<VCC=5V, ISINK=6mA | 4 | ||
| Reset threshold accuracy | -2.5 | 2.5 | % | 1 | |||
| Reset threshold (CN8__T, CN810T 3.08V) | VRES | 3 | 3.08 | 3.15 | V | 4 | |
| Reset output pulse width | TRES | 140 | 240 | 400 | ms | 4 | |
| Maximum supply voltage | VCCMAX | 5.5 | V | 4 | |||
| Minimum supply voltage | VCCMIN | 1.15 | V | 4 | |||
| Operating current | IVCC | 2.8 | 5.5 | µA | VCC=2.0V | 4 | |
| Operating current | IVCC | 3.2 | 6 | µA | VCC=3.0V | 4 | |
| Operating current | IVCC | 4 | 7.5 | µA | VCC=5.0V | 4 | |
| VCC to RESET delay (CN810) | 20 | µs | VCC transitions from VRES+0.1V to VRES-0.1V | 4 | |||
| Absolute maximum VCC pin voltage (relative to GND) | VCC | -0.3 | 6 | V | relative to GND | 3 | |
| Absolute maximum RESET pin voltage (relative to GND) | RESET | -0.3 | 6 | V | relative to GND | 3 | |
| Absolute maximum VCC pin current | VCC | 20 | mA | 3 | |||
| Absolute maximum RESET pin current | RESET | 20 | mA | 3 | |||
| Thermal resistance (热阻) | 300 | °C/W | 3 | ||||
| Operating ambient temperature | -40 | 85 | °C | 3 | |||
| Storage temperature | -65 | 150 | °C | 3 | |||
| Maximum junction temperature | 150 | °C | 3 | ||||
| Soldering temperature | 300 | °C | 10 s | 3 | |||
| ESD voltage (HBM) | 4 | KV | HBM | 3 |
CAD (KiCad official)
- Symbol:
CN810T - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files:
cn810t-etched.step/cn810t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cn810t.step/cn810t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ShangHai Consonance Elec datasheet (7 pp, sha256
bbeb80fd1a0c3663, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# CN810T
**ShangHai Consonance Elec** · Supervisor And Reset ICs · SOT-23-3
CN810T from ShangHai Consonance Elec, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the supervisor circuit, as shown in the pinout diagram of the SOT23-3 package. |
| 2 | RESET | output | CMOS reset output for the CN810T, active high: it is driven high while VCC is below the reset threshold VRES (3.08V typ for CN810T) and stays high for at least 140 ms after VCC rises above VRES + VHYST, then goes low. |
| 3 | VCC | power_in | Positive supply input that powers the internal circuit and is also the voltage being monitored; the datasheet gives an absolute maximum of -0.3V to +6.0V relative to GND and an operating minimum of 1.15V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ShangHai Consonance Elec |
| Package | SOT-23-3 |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| RESET output low voltage (CN810), VRES<VCC=3V | VOL | | | 0.3 | V | VRES<VCC=3V, ISINK=3.2mA | 4 |
| RESET output low voltage (CN810), VRES<VCC=4V | VOL | | | 0.3 | V | VRES<VCC=4V, ISINK=5mA | 4 |
| RESET output low voltage (CN810), VRES<VCC=5V | VOL | | | 0.3 | V | VRES<VCC=5V, ISINK=6mA | 4 |
| Reset threshold accuracy | | -2.5 | | 2.5 | % | | 1 |
| Reset threshold (CN8__T, CN810T 3.08V) | VRES | 3 | 3.08 | 3.15 | V | | 4 |
| Reset output pulse width | TRES | 140 | 240 | 400 | ms | | 4 |
| Maximum supply voltage | VCCMAX | | | 5.5 | V | | 4 |
| Minimum supply voltage | VCCMIN | 1.15 | | | V | | 4 |
| Operating current | IVCC | | 2.8 | 5.5 | µA | VCC=2.0V | 4 |
| Operating current | IVCC | | 3.2 | 6 | µA | VCC=3.0V | 4 |
| Operating current | IVCC | | 4 | 7.5 | µA | VCC=5.0V | 4 |
| VCC to RESET delay (CN810) | | | 20 | | µs | VCC transitions from VRES+0.1V to VRES-0.1V | 4 |
| Absolute maximum VCC pin voltage (relative to GND) | VCC | -0.3 | | 6 | V | relative to GND | 3 |
| Absolute maximum RESET pin voltage (relative to GND) | RESET | -0.3 | | 6 | V | relative to GND | 3 |
| Absolute maximum VCC pin current | VCC | | | 20 | mA | | 3 |
| Absolute maximum RESET pin current | RESET | | | 20 | mA | | 3 |
| Thermal resistance (热阻) | | | | 300 | °C/W | | 3 |
| Operating ambient temperature | | -40 | | 85 | °C | | 3 |
| Storage temperature | | -65 | | 150 | °C | | 3 |
| Maximum junction temperature | | | | 150 | °C | | 3 |
| Soldering temperature | | | | 300 | °C | 10 s | 3 |
| ESD voltage (HBM) | | | | 4 | KV | HBM | 3 |
## CAD (KiCad official)
- Symbol: `CN810T`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3 (KiCad packages3D, STEP)
- 3D model files: `cn810t-etched.step` / `cn810t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cn810t.step` / `cn810t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ShangHai Consonance Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588917727637745664) (7 pp, sha256 `bbeb80fd1a0c3663`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cn810t-datasheet.pdf)