CN810S

{
 "schema": "adom.pads/1",
 "slug": "cn810s",
 "footprint": "SOT-23-3",
 "generated_from": {
  "footprint": "SOT-23-3@sha256:ab2ce7041629a2c0",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -1.1375,
   -0.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-23-3@sha256:ab2ce7041629a2c0"
 },
 "pad_count": 3,
 "symbol_pins": [
  "1",
  "2",
  "3"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "GND",
   "type": "power_in",
   "description": "Ground reference for the device. Connect to system ground.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-23-3.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -1.1375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "RESET",
   "type": "output",
   "description": "Active-HIGH CMOS reset output (CN810 variant). When VCC falls below the reset threshold (VRES = 2.93 V typ for the 'S' option) this pin is driven HIGH to assert reset. After VCC rises above VRES + VHYST, the pin remains HIGH for at least 140 ms (typ 240 ms, max 400 ms) before returning LOW. VOH ≥ VCC−0.4 V with ISRC up to 2 mA at VCC=4 V; VOL ≤ 0.3 V with ISINK up to 6 mA at VCC=5 V.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-3.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    1.1375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.325,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "VCC",
   "type": "power_in",
   "description": "Positive supply input. This pin is both the operating supply for the internal circuitry and the voltage being monitored against the reset threshold. Absolute max 6.0 V; operating range up to 5.5 V; monitored threshold VRES = 2.93 V typ (2.86-3.00 V) for the 'S' option. A 0.1 µF bypass capacitor near this pin is recommended to improve rejection of short supply glitches.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23-3.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}