CN803S

{
 "schema": "adom.pads/1",
 "slug": "cn803s",
 "footprint": "SOT-23",
 "generated_from": {
  "footprint": "SOT-23@sha256:0d88c86c1b6d8c1a",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -0.9375,
   -0.95
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOT-23@sha256:0d88c86c1b6d8c1a"
 },
 "pad_count": 3,
 "symbol_pins": [
  "1",
  "2",
  "3"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.9375,
    -0.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "GND",
   "type": "power_in",
   "description": "Ground reference for the device.",
   "is_pin1": true,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -0.9375,
    0.95
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "RESET",
   "type": "output",
   "description": "Active-low, open-drain reset output. Pulled low while VCC is below the 2.93V reset threshold (VRES). After VCC rises above VRES+VHYST (VHYST = 0.013 x VRES), the pin is held low for at least 140 ms (typ 240 ms, max 400 ms) and then goes high-impedance. VOL <= 0.3V at ISINK = 3.2 mA (VCC = 3V). Requires an external pull-up resistor.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    0.9375,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "VCC",
   "type": "power_in",
   "description": "Positive supply input and the voltage being monitored. Operating range 1.15V to 5.5V (abs max 6.0V). Typical IVCC = 3.2 uA at 3V. A 0.1 uF bypass capacitor to GND near this pin improves rejection of short VCC glitches.",
   "is_pin1": false,
   "source": {
    "geometry": "SOT-23.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}