Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

CN5820

ShangHai Consonance Elec · LED Drivers · SOT-23-6

CN5820 from ShangHai Consonance Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CSN input Negative current-sense input; the sense resistor RCS is connected between VIN and CSN, and in normal operation the average (VIN−CSN) is regulated to 160 mV.
2 DIM input LED brightness control input: below 0.4 V the DRV output is low (LED off), above 1.2 V it runs normal PWM with average LED current 0.16 V/RCS, and between 0.4 V and 1.2 V it gives analog dimming with average current 0.133×VDIM/RCS; PWM frequency up to 20 kHz.
3 VIN power_in Positive power input that supplies the internal circuitry and is the positive sense input for LED current; operating input range is 4 V to 28 V, with absolute maximum −0.3 V to 32 V to GND.
4 VCC power_out 5 V regulated output that requires a 4.7 µF or 10 µF filter capacitor to GND and can supply a maximum of 5 mA.
5 DRV output Gate drive output for the external N-channel MOSFET, with absolute maximum range −0.3 V to VCC.
6 GND power_in Power ground, which should be returned to system ground separately from high-current paths and the VCC capacitor ground.

Key specifications

Parameter Value
Manufacturer ShangHai Consonance Elec
Package SOT-23-6
Category LED Drivers
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
输入电压范围 (Input voltage range) VIN 4 28 V 4
VCC pin output voltage VCC 4.5 5.5 V IVCC=0.1mA 到 5mA,VIN=5.5V 到 30V 4
工作温度范围 (Operating ambient temperature) TA -40 85 ℃ 3
VIN, CSN to GND -0.3 32 V 3
VCC to GND -0.3 6.5 V 3
CSN to VIN -0.3 0.3 V 3
DIM, DRV -0.3 V upper limit printed as VCC 3
最大结温 (Maximum junction temperature) TJ 150 ℃ 3
存储温度 (Storage temperature) TSTG -65 150 ℃ 3
工作电流 (Operating current) IVIN 350 460 570 uA VDIM<0.4V 4
检测电压低端阈值 (Low-side sense threshold) VCSLO 144 mV (VIN-VCSN) 从0.22V下降,直到VDRV>(VCC-0.5V) 4
检测电压高端阈值 (High-side sense threshold) VCSHI 176 mV (VIN-VCSN) 从0V上升,直到VDRV<0.5V 4
电流检测阈值电压迟滞 (Sense threshold hysteresis) CSHYS 32 mV 4
输出高电平传输延时 (Output high propagation delay) tDPDH 82 nS (VIN-VCSN)从0.22V降到0V 4
输出低电平传输延时 (Output low propagation delay) tDPDL 82 nS (VIN-VCSN)从0V上升到0.22V 4
CSN管脚输入电流 (CSN input current) ICSN 1 uA 4
DRV管脚输出电流 (DRV source current) 0.5 A VCSN=VIN, VDRV=0.5×VCC 4
DRV管脚灌入电流 (DRV sink current) 1 A VCSN=VIN-0.22V,VDRV=0.5×VCC 4
DRV输出低电平 (DRV output low) VOL 0.5 V IDRV=-10mA 4
输入电源调整特性 (Input supply regulation) 6 mV VIN=6V到28V,IVCC=3mA 4
输入电源抑制比 (Input supply rejection ratio) PSRR -35 dB IVCC=3mA,fIN=10kHz 4
启动时间 (Start-up time) tSTART 350 uS VCC=0 to 4.5V 4
工作频率 (Operating frequency) fSW 1 MHz 4
最大DIM频率 (Maximum DIM frequency) fDIM 20 kHz 4
DIM输入高电平 (DIM input high level) VIH 1.2 V VCSN=VIN, 增加DIM的电压直到VDRV >(VCC-0.5V) 4
DIM输入低电平 (DIM input low level) VIL 0.4 V VCSN=VIN, 减小DIM的电压直到VDRV <0.5V 4
DIM导通时间 (DIM turn-on time) tDIMON 100 nS DIM 上升沿到VDRV=0.5VCC, VCSN=VIN , CDRV = 1nF 4
DIM关断时间 (DIM turn-off time) tDIMOFF 100 nS DIM 下降沿到VDRV=0.5VCC, VCSN=VIN , CDRV = 1nF 4
DIM管脚漏电流 (DIM pin leakage, high DIM) 1 uA VDIM = 5V 4
DIM管脚漏电流 (DIM pin leakage, low DIM) -1 uA VDIM = 0V 4

CAD (KiCad official)

  • Symbol: CN5820
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: cn5820-etched.step / cn5820-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); cn5820.step / cn5820.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ShangHai Consonance Elec datasheet (8 pp, sha256 f02226f82a1b727c, retrieved 2026-10-21, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF