component

CN5816

Public Made by Adom

by adom

ShangHai Consonance Elec LED Drivers, SSOP-10-150mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentled-drvcn5816
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs cn5816: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
viewers cn5816: viewers · Ray 27d ago
cn5816-etched.fit.json cn5816: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
cn5816-etched.glb cn5816: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
cn5816-etched.step cn5816: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray 3d ago
cn5816.glb Publish 0.1.0 · Ray 27d ago
cn5816.kicad_mod Publish 0.1.0 · Ray 27d ago
cn5816.kicad_sym Publish 0.1.0 · Ray 27d ago
cn5816.lbr Publish 0.1.0 · Ray 27d ago
cn5816.step Publish 0.1.0 · Ray 27d ago
package.json Publish 0.1.0 · Ray 27d ago
page.json Brief states the pinout check that actually ran (was an unconditional "Datasheet-verified pinout") · Ray 11d ago
README.md cn5816: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray 17d ago

CN5816

ShangHai Consonance Elec · LED Drivers · SSOP-10-150mil

CN5816 from ShangHai Consonance Elec, in a SSOP-10-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN input Active-high chip shutdown input. Drive high (VIH >= 2.3V) to put CN5816 into shutdown; in shutdown the internal blocks including the 5V regulator are disabled and quiescent current is extremely low. Drive low (VIL <= 0.5V) for normal operation. PWM dimming is done by applying the PWM signal directly to this pin (each high-to-low transition retriggers the ~9.5ms soft start).
2 COMP output Loop frequency compensation pin. Connect the external frequency-compensation network (R3 series with C3) from this pin to GND. This is the transconductance error amplifier output used to tune loop dynamics.
3 OVP input Output over-voltage protection feedback input. When OVP rises above 1.283V the internal PWM controller shuts off the external N-channel MOSFET; the PWM resumes only after OVP falls below 1.219V. Set the OVP trip via an R1/R2 divider from VOUT: VOUT = 1.283 x (1 + R1/R2). Bias current is +/-100nA.
4 CSP input LED current-sense positive input. Connect to the current-inflow side of the external LED current-sense resistor RCS. The chip regulates LED current using a 120mV threshold: ILED = 120mV / RCS.
5 CSN input LED current-sense negative input. Connect to the current-outflow side of the external LED current-sense resistor RCS. Forms the high-side differential sense pair with CSP; regulation threshold is 120mV.
6 VIN power_in Input supply. Operating range 4.5V to 32V (absolute max 36V). Requires an input decoupling capacitor to GND close to the pin.
7 VCC power_out 5V internal LDO output. Powers internal low-voltage circuitry and the MOSFET gate driver, and can source up to 4mA to external circuitry. Requires at least 4.7uF to GND. Regulates to ~5V when VIN is 5.5V-32V; below 5.5V the output tracks lower.
8 DRV output Gate-drive output for the external N-channel MOSFET. High level is 5V (from VCC). Source capability 0.8A, sink capability 1.5A; typical rise/fall times 32ns/25ns into a 2nF gate.
9 GND power_in Ground / input supply return. Route signal ground (R2, C3, C4, C5, and this pin) separately from power ground and tie together at a single system-ground point.
10 ISW input Inductor current sense input. Senses the voltage across an RSW resistor from the external MOSFET source to GND for current-mode control and cycle-by-cycle over-current protection. Over-current threshold VCS(OC) is 180mV typical (162-198mV). An RC filter (R4 <= 2k with C5, ~100ns time constant) is recommended.

Key specifications

Parameter Value
Manufacturer ShangHai Consonance Elec
Package SSOP-10-150mil
Category LED-drv
Pins 10

Ordering variants

Same part, different packaging or reel option.

  • CN5816

CAD (KiCad official)

  • Symbol: CN5816
  • Footprint: Package_SO:SSOP-10_3.9x4.9mm_P1.00mm
  • 3D model: SSOP-10-150mil (KiCad packages3D, STEP)
  • 3D model files: cn5816-etched.step / cn5816-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); cn5816.step / cn5816.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ShangHai Consonance Elec datasheet (10 pp, sha256 12658f3a7cddd312, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF