component
CN5815
Public Made by Adomby adom
ShangHai Consonance Elec LED Drivers, SSOP-10-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| cn5815-etched.glb | 17d ago |
| cn5815-etched.step | 17d ago |
| cn5815-hero.glb | 17d ago |
| cn5815-hero.overlay.json | 17d ago |
| cn5815.glb | 17d ago |
| cn5815.kicad_mod | 17d ago |
| cn5815.kicad_sym | 17d ago |
| cn5815.lbr | 17d ago |
| cn5815.step | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
CN5815
ShangHai Consonance Elec · LED Drivers · SSOP-10-150mil
CN5815 from ShangHai Consonance Elec, in a SSOP-10-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OVP | input | Overvoltage-protection input: DRV is forced low when OVP rises above 1.205 V (typ) and normal operation resumes only after OVP falls below 1.151 V (typ). |
| 2 | FB | input | LED current feedback input; the sense resistor from FB to GND sets the LED current, with the FB reference voltage specified at 108 mV to 132 mV (120 mV typ). |
| 3 | COMP | passive | Loop frequency-compensation pin; the compensation network (C1, C2, R3 in the reference design) is connected between this pin and GND. |
| 4 | DIM | input | PWM dimming input: a low level shuts off PWM modulation and forces DRV low, a high level (VIH 2.0 V min, VIL 0.6 V max) enables LED switching, and the PWM dimming frequency should be 30 kHz to 100 kHz. |
| 5 | SHDN | input | Active-high shutdown input: above 2.3 V (VIH) puts the chip into shutdown with all internal blocks including the 5 V regulator disabled, and below 0.5 V (VIL) enables normal operation. |
| 6 | VIN | power_in | Input supply pin, rated for 4.5 V to 32 V operation (absolute maximum 36 V), which requires a filter capacitor to GND. |
| 7 | VCC | power_out | Internal 5 V regulator output that requires a 4.7 µF or 10 µF capacitor to GND, regulates to 5 V for VIN between 5.5 V and 32 V, and supplies at most 4 mA and is not recommended for powering external circuits. |
| 8 | DRV | output | Gate-drive output for the external N-channel MOSFET, swinging to 5 V high with source current up to 0.8 A and sink current up to 1.5 A. |
| 9 | GND | power_in | Ground and negative input-supply return; the power ground should be kept separate from the analog/signal ground per the PCB guidance. |
| 10 | ISW | input | Inductor current sense input used for peak current control and cycle-by-cycle overcurrent protection, with the overcurrent threshold at 170 mV to 190 mV (180 mV typ) measured on this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ShangHai Consonance Elec |
| Package | SSOP-10-150mil |
| Category | LED Drivers |
| Pins | 10 |
CAD (KiCad official)
- Symbol:
CN5815 - Footprint:
Package_SO:SSOP-10_3.9x4.9mm_P1.00mm - 3D model: SSOP-10-150mil (KiCad packages3D, STEP)
- 3D model files:
cn5815-etched.step/cn5815-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cn5815.step/cn5815.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ShangHai Consonance Elec datasheet (11 pp, sha256
28389d74ce8af96a, retrieved 2026-10-09, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).