component

CN3130

Public Made by Adom

by adom

ShangHai Consonance Elec Battery Management, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.

componentpmiccn3130
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs cn3130: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
cn3130-etched.fit.json cn3130: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
cn3130-etched.glb cn3130: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
cn3130-etched.step cn3130: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
cn3130.glb Publish 0.1.0 · Ray
cn3130.kicad_mod Publish 0.1.0 · Ray
cn3130.kicad_sym Publish 0.1.0 · Ray
cn3130.lbr rebuild the library on adom-lbr 2.32.0. The published copy was built by 2.18.0, which imported every KiCad roundrect an… · Ray
cn3130.step Publish 0.1.0 · Ray
package.json Publish 0.2.0 · Ray
pads.json pin 1: carry the footprint's marker into the .lbr, the viewer and page.json (silk-marker, drawn, top-left) · Ray
page.json cn3130: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md cn3130: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

CN3130

ShangHai Consonance Elec · Battery Management · SOT-23-6

CN3130 from ShangHai Consonance Elec, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CHRG output Charge status indicator. Open-drain output; pulled low by an internal switch while the charger is charging the battery, and goes high-impedance when charging completes. Sink current ~10 mA at V_CHRG=0.3V; leakage <1 uA at V_CHRG=6V.
2 FB input Battery voltage sense (feedback) input. Senses the positive terminal of the battery to precisely regulate the constant-voltage charge voltage, compensating for wire/contact resistance between the BAT pin and the cell. An optional resistor between FB and BAT can raise V_REG above 3.3V per V_REG = 3.3 + 3.707e-6 × Rx.
3 BAT power_out Battery connection. Sources charge current and the constant-voltage regulation to the battery positive terminal. Draws <3 uA from the battery when V_IN is below the UVLO threshold or in sleep mode.
4 VIN power_in Positive supply input, 3.9 V to 6 V operating range (absolute max 6.5 V). Powers the internal circuitry and provides charge current to the battery. When V_IN − V_BAT < 15 mV the part enters low-power sleep mode (I_BAT < 3 uA).
5 GND power_in Device ground / power return.
6 ISET bidirectional Charge-current program and monitor pin. An external resistor R_ISET from ISET to GND sets the constant charge current: I_CH = (V_ISET × 986) / R_ISET. V_ISET is regulated to 0.36 V in trickle/pre-charge and to 1.205 V in constant-current mode, so the pin voltage can also be read to monitor instantaneous charge current.

Key specifications

Parameter Value
Manufacturer ShangHai Consonance Elec
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • CN3130

CAD (KiCad official)

  • Symbol: CN3130
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: cn3130-etched.step / cn3130-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); cn3130.step / cn3130.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
cn3130.step 97 KB You want the bare part, or you mark your own boards.
cn3130-etched.step 1.5 MB You want the part with CN3130 already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 366 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ShangHai Consonance Elec datasheet (11 pp, sha256 bbaf782bea98ab1b, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF