component
CN3130
Public Made by Adomby adom
ShangHai Consonance Elec Battery Management, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+7−4@@ -38,7 +38,7 @@ "number": "2", "name": "FB", "type": "input",- "description": "Battery voltage sense (feedback) input. Senses the positive terminal of the battery to precisely regulate the constant-voltage charge voltage, compensating for wire/contact resistance between the BAT pin and the cell. An optional resistor between FB and BAT can raise V_REG above 3.3V per V_REG = 3.3 + 3.707e-6 \u00d7 Rx."+ "description": "Battery voltage sense (feedback) input. Senses the positive terminal of the battery to precisely regulate the constant-voltage charge voltage, compensating for wire/contact resistance between the BAT pin and the cell. An optional resistor between FB and BAT can raise V_REG above 3.3V per V_REG = 3.3 + 3.707e-6 × Rx." }, { "number": "3",@@ -50,7 +50,7 @@ "number": "4", "name": "VIN", "type": "power_in",- "description": "Positive supply input, 3.9 V to 6 V operating range (absolute max 6.5 V). Powers the internal circuitry and provides charge current to the battery. When V_IN \u2212 V_BAT < 15 mV the part enters low-power sleep mode (I_BAT < 3 uA)."+ "description": "Positive supply input, 3.9 V to 6 V operating range (absolute max 6.5 V). Powers the internal circuitry and provides charge current to the battery. When V_IN − V_BAT < 15 mV the part enters low-power sleep mode (I_BAT < 3 uA)." }, { "number": "5",@@ -62,7 +62,7 @@ "number": "6", "name": "ISET", "type": "bidirectional",- "description": "Charge-current program and monitor pin. An external resistor R_ISET from ISET to GND sets the constant charge current: I_CH = (V_ISET \u00d7 986) / R_ISET. V_ISET is regulated to 0.36 V in trickle/pre-charge and to 1.205 V in constant-current mode, so the pin voltage can also be read to monitor instantaneous charge current."+ "description": "Charge-current program and monitor pin. An external resistor R_ISET from ISET to GND sets the constant charge current: I_CH = (V_ISET × 986) / R_ISET. V_ISET is regulated to 0.36 V in trickle/pre-charge and to 1.205 V in constant-current mode, so the pin voltage can also be read to monitor instantaneous charge current." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/cn3130-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }