component
CN3062
Public Made by Adomby adom
ShangHai Consonance Elec Battery Management, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
CN3062
ShangHai Consonance Elec · Battery Management · SOIC-8-EP
CN3062 from ShangHai Consonance Elec, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TEMP | input | Battery NTC temperature sense input; charging is suspended if TEMP is below 47% or above 84% of VIN for more than 0.15 s, and tying TEMP to GND disables temperature monitoring. |
| 2 | ISET | passive | Sets the constant charge current through an external resistor to GND (ICH = 1800 V / RISET), with the pin held at 0.2 V in precharge and 2 V in constant-current mode, and can be used to monitor ICH = (VISET × 900) / RISET. |
| 3 | GND | power_in | Ground reference for the charger; the exposed metal pad on the package underside should be soldered to a large PCB ground copper area for maximum charge current. |
| 4 | VIN | power_in | Positive input supply for the internal circuits, specified at 4.35 V to 6 V, with the device entering low-power sleep mode when VIN is within 20 mV of BAT and absolute maximum pin voltage of -0.3 V to 6.5 V. |
| 5 | BAT | power_out | Battery connection that delivers charge current and the regulated 4.2 V charge voltage, drawing less than 3 µA in UVLO or sleep mode. |
| 6 | DONE | output | Open-drain charge-complete indicator that is pulled low when charging terminates at 10% of the constant-charge current and is high-impedance otherwise (10 mA sink at 0.3 V, 1 µA leakage at 6 V). |
| 7 | CHRG | output | Open-drain charging-status indicator that is pulled low while charging and is high-impedance otherwise (10 mA sink at 0.3 V, 1 µA leakage at 6 V). |
| 8 | FB | input | Kelvin sense input for the battery positive terminal that sets the 4.2 V ±1% regulated voltage, where a resistor Rx between FB and BAT raises it per Vbat = 4.2 + 3.04×10^-6 × Rx. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ShangHai Consonance Elec |
| Package | SOIC-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入电源电压 | VIN | 4.35 | 6 | V | 5 | ||
| 工作电流 | IVIN | 400 | 650 | 950 | µA | BAT端无负载 | 5 |
| 电源电压过低锁存阈值 | Vuvlo | 3.7 | 3.9 | V | VIN下降 | 5 | |
| 恒压充电电压 | VREG | 4.158 | 4.2 | 4.242 | V | FB端连接到BAT端 | 5 |
| 电池连接端电流 | IBAT | 400 | 500 | 600 | mA | RISET=3.6K, 恒流充电模式 | 5 |
| 电池连接端电流 | IBAT | 25 | 50 | 75 | mA | RISET=3.6K, VBAT＝2.4V | 5 |
| 睡眠模式电池端电流 | IBAT | 3 | µA | VIN=0V, 睡眠模式 | 5 | ||
| 预充电阈值 | VPRE | 2.9 | 3 | 3.1 | V | FB管脚电压上升 | 5 |
| 充电结束阈值 | Vterm | 0.18 | 0.22 | 0.26 | V | 测量ISET管脚的电压 | 5 |
| FB输入电流1 | IFB1 | 1.8 | 3 | 6 | µA | VFB=3.6V，正常充电状态 | 5 |
| TEMP高端阈值 | VHIGH | 84 | 86.5 | %VIN | 5 | ||
| TEMP低端阈值 | VLOW | 44.5 | 47 | %VIN | 5 | ||
| 工作电压范围上限相关：极限 管脚电压 | -0.3 | 6.5 | V | 管脚电压 | 4 | ||
| 最高结温 | 150 | ℃ | 4 | ||||
| 工作温度 | -40 | 85 | ℃ | 4 | |||
| 静电放电(HBM) | 2 | KV | HBM | 4 | |||
| 存储温度 | -65 | 150 | ℃ | 4 | |||
| 滞回电压 (UVLO) | Huvlo | 0.1 | V | 5 | |||
| 预充电阈值迟滞 | HPRE | 0.1 | V | 5 | |||
| 睡眠模式阈值 | VSLP | 20 | mV | VIN下降, 测量电压差(VIN－VBAT) | 5 | ||
| 睡眠模式解除阈值 | VSLPR | 50 | mV | VIN上升, 测量电压差(VIN－VBAT) | 5 | ||
| ISET管脚电压 (预充电模式) | VISET | 0.2 | V | VBAT<3V，预充电模式 | 5 | ||
| ISET管脚电压 (恒流充电模式) | VISET | 2 | V | 恒流充电模式 | 5 | ||
| FB输入电流2 | IFB2 | 1 | µA | VIN<Vuvlo或VIN<VBAT | 5 | ||
| TEMP输入电流 | 0.5 | µA | TEMP到VIN或到地端的电流 | 5 | |||
| CHRG下拉电流 | ICHRG | 10 | mA | VCHRG=0.3V，充电状态 | 5 | ||
| CHRG漏电流 | ICHRG | 1 | µA | VCHRG=6V，充电结束状态 | 5 | ||
| DONE下拉电流 | IDONE | 10 | mA | VDONE=0.3V，充电结束状态 | 5 | ||
| DONE漏电流 | IDONE | 1 | µA | VDONE=6V，充电状态 | 5 |
CAD (KiCad official)
- Symbol:
CN3062 - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
cn3062-etched.step/cn3062-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cn3062.step/cn3062.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ShangHai Consonance Elec datasheet (11 pp, sha256
635f66cf897da1ea, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# CN3062
**ShangHai Consonance Elec** · Battery Management · SOIC-8-EP
CN3062 from ShangHai Consonance Elec, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | TEMP | input | Battery NTC temperature sense input; charging is suspended if TEMP is below 47% or above 84% of VIN for more than 0.15 s, and tying TEMP to GND disables temperature monitoring. |
| 2 | ISET | passive | Sets the constant charge current through an external resistor to GND (ICH = 1800 V / RISET), with the pin held at 0.2 V in precharge and 2 V in constant-current mode, and can be used to monitor ICH = (VISET × 900) / RISET. |
| 3 | GND | power_in | Ground reference for the charger; the exposed metal pad on the package underside should be soldered to a large PCB ground copper area for maximum charge current. |
| 4 | VIN | power_in | Positive input supply for the internal circuits, specified at 4.35 V to 6 V, with the device entering low-power sleep mode when VIN is within 20 mV of BAT and absolute maximum pin voltage of -0.3 V to 6.5 V. |
| 5 | BAT | power_out | Battery connection that delivers charge current and the regulated 4.2 V charge voltage, drawing less than 3 µA in UVLO or sleep mode. |
| 6 | DONE | output | Open-drain charge-complete indicator that is pulled low when charging terminates at 10% of the constant-charge current and is high-impedance otherwise (10 mA sink at 0.3 V, 1 µA leakage at 6 V). |
| 7 | CHRG | output | Open-drain charging-status indicator that is pulled low while charging and is high-impedance otherwise (10 mA sink at 0.3 V, 1 µA leakage at 6 V). |
| 8 | FB | input | Kelvin sense input for the battery positive terminal that sets the 4.2 V ±1% regulated voltage, where a resistor Rx between FB and BAT raises it per Vbat = 4.2 + 3.04×10^-6 × Rx. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ShangHai Consonance Elec |
| Package | SOIC-8-EP |
| Category | Power Management (PMIC) |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入电源电压 | VIN | 4.35 | | 6 | V | | 5 |
| 工作电流 | IVIN | 400 | 650 | 950 | µA | BAT端无负载 | 5 |
| 电源电压过低锁存阈值 | Vuvlo | 3.7 | | 3.9 | V | VIN下降 | 5 |
| 恒压充电电压 | VREG | 4.158 | 4.2 | 4.242 | V | FB端连接到BAT端 | 5 |
| 电池连接端电流 | IBAT | 400 | 500 | 600 | mA | RISET=3.6K, 恒流充电模式 | 5 |
| 电池连接端电流 | IBAT | 25 | 50 | 75 | mA | RISET=3.6K, VBAT＝2.4V | 5 |
| 睡眠模式电池端电流 | IBAT | | | 3 | µA | VIN=0V, 睡眠模式 | 5 |
| 预充电阈值 | VPRE | 2.9 | 3 | 3.1 | V | FB管脚电压上升 | 5 |
| 充电结束阈值 | Vterm | 0.18 | 0.22 | 0.26 | V | 测量ISET管脚的电压 | 5 |
| FB输入电流1 | IFB1 | 1.8 | 3 | 6 | µA | VFB=3.6V，正常充电状态 | 5 |
| TEMP高端阈值 | VHIGH | 84 | | 86.5 | %VIN | | 5 |
| TEMP低端阈值 | VLOW | 44.5 | | 47 | %VIN | | 5 |
| 工作电压范围上限相关：极限 管脚电压 | | -0.3 | | 6.5 | V | 管脚电压 | 4 |
| 最高结温 | | | | 150 | ℃ | | 4 |
| 工作温度 | | -40 | | 85 | ℃ | | 4 |
| 静电放电(HBM) | | | | 2 | KV | HBM | 4 |
| 存储温度 | | -65 | | 150 | ℃ | | 4 |
| 滞回电压 (UVLO) | Huvlo | | 0.1 | | V | | 5 |
| 预充电阈值迟滞 | HPRE | | 0.1 | | V | | 5 |
| 睡眠模式阈值 | VSLP | | 20 | | mV | VIN下降, 测量电压差(VIN－VBAT) | 5 |
| 睡眠模式解除阈值 | VSLPR | | 50 | | mV | VIN上升, 测量电压差(VIN－VBAT) | 5 |
| ISET管脚电压 (预充电模式) | VISET | | 0.2 | | V | VBAT<3V，预充电模式 | 5 |
| ISET管脚电压 (恒流充电模式) | VISET | | 2 | | V | 恒流充电模式 | 5 |
| FB输入电流2 | IFB2 | | 1 | | µA | VIN<Vuvlo或VIN<VBAT | 5 |
| TEMP输入电流 | | | 0.5 | | µA | TEMP到VIN或到地端的电流 | 5 |
| CHRG下拉电流 | ICHRG | | 10 | | mA | VCHRG=0.3V，充电状态 | 5 |
| CHRG漏电流 | ICHRG | | 1 | | µA | VCHRG=6V，充电结束状态 | 5 |
| DONE下拉电流 | IDONE | | 10 | | mA | VDONE=0.3V，充电结束状态 | 5 |
| DONE漏电流 | IDONE | | 1 | | µA | VDONE=6V，充电状态 | 5 |
## CAD (KiCad official)
- Symbol: `CN3062`
- Footprint: `Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm`
- 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files: `cn3062-etched.step` / `cn3062-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cn3062.step` / `cn3062.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ShangHai Consonance Elec datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586177074264748032) (11 pp, sha256 `635f66cf897da1ea`, retrieved 2026-10-18, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cn3062-datasheet.pdf)