CM6111-DFNTA

{
  "slug": "cm6111-dfnta",
  "version": "0.1.0",
  "type": "component",
  "description": "CIMO Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, DFN-10(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "cm6111-dfnta",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "cm6111-dfnta.kicad_sym",
    "cm6111-dfnta.kicad_mod",
    "cm6111-dfnta.glb",
    "cm6111-dfnta.step",
    "cm6111-dfnta.lbr",
    "docs/hero.png",
    "docs/cm6111-dfnta-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "cm6111-dfnta-hero.glb",
    "cm6111-dfnta-hero.overlay.json",
    "cm6111-dfnta-etched.glb"
  ],
  "component": {
    "mpn": "CM6111-DFNTA",
    "manufacturer": "CIMO",
    "package": "DFN-10(3x3)",
    "pin_count": 11,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/039e50528f328be26c9fbc5d5aaad059.pdf",
    "parts": {
      "symbol": "cm6111-dfnta.kicad_sym",
      "footprint": "cm6111-dfnta.kicad_mod",
      "model_3d": "cm6111-dfnta-hero.glb",
      "model_3d_plain": "cm6111-dfnta-etched.glb",
      "model_3d_step": "cm6111-dfnta-etched.step",
      "model_3d_step_plain": "cm6111-dfnta.step",
      "lbr": "cm6111-dfnta.lbr"
    },
    "distributor_links": {
      "lcsc": "C41361422"
    },
    "distributor_check": {
      "checked_at": "2026-10-23T03:10:42Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN",
        "type": "power_in",
        "description": "Regulator supply input (pins 1 and 2 tied together) requiring a 4.7μF bypass capacitor, with more input capacitance for large load transients."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Regulator supply input (pins 1 and 2 tied together) requiring a 4.7μF bypass capacitor, with more input capacitance for large load transients."
      },
      {
        "number": "3",
        "name": "EN/UV",
        "type": "input",
        "description": "Enable/undervoltage lockout: low puts the part in shutdown with quiescent current below 1μA, turn-on threshold is 1.24V rising with 80mV hysteresis, and it must not be left floating (tie to IN if unused)."
      },
      {
        "number": "4",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that is pulled low when PGFB is below 300mV and may be left floating if unused."
      },
      {
        "number": "5",
        "name": "ILIM",
        "type": "passive",
        "description": "Current-limit programming pin where a resistor to GND sets the limit with a typical scale factor of 120mA•kΩ, or connect to GND if programmable limit is not needed."
      },
      {
        "number": "6",
        "name": "PGFB",
        "type": "input",
        "description": "Power-good feedback input with a 300mV threshold (PG goes high above 300mV) that also enables fast-start; connect to IN if PG and fast-start are not used."
      },
      {
        "number": "7",
        "name": "SET",
        "type": "passive",
        "description": "Output voltage setting pin sourcing 100μA through an external resistor to GND (VSET = ISET×RSET, 1.7V~15V output range), where a capacitor to GND improves noise, PSRR and transient response but increases start-up time."
      },
      {
        "number": "8",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "9",
        "name": "OUTS",
        "type": "input",
        "description": "Output sense pin, Kelvin-connected to the output capacitor and load for best regulation."
      },
      {
        "number": "10",
        "name": "OUT",
        "type": "power_out",
        "description": "Voltage output requiring a minimum 4.7μF output capacitor with ESR below 50mΩ and ESL below 2nH for stability."
      },
      {
        "number": "11",
        "name": "EPAD",
        "type": "power_in",
        "description": "Exposed pad, connected directly to GND to ensure electrical and thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet pin table lists type as AI/O for ILIM, SET, OUTS (analog in/out); mapped to passive/passiv; The DFN10 pinout figure text is interleaved with the MSOP10 figure; pin assignments were taken from "
        ],
        "pages_sent": 18,
        "cost_usd": 0.1424,
        "at": "2026-10-23T03:10:31"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/039e50528f328be26c9fbc5d5aaad059.pdf",
        "pages": 18,
        "sha256": "208fe00cdab5c92f",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 11,
        "described": 11,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "cm6111-dfnta.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "738e2eb45860c11759f8e4f44ab26932b7c15e4d5d6c8c9ac22ae866a3e38711",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "cm6111-dfnta-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.98,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0fce34a40d04a0212554b3c6b368051f496160e92f8cbeef8116e02f7b026c92",
        "checked": "2026-10-23",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}