component
CM1632CB
Public Made by Adomby adom
iCM(创芯微) , SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
CM1632CB
iCM(创芯微) · IC · SOP-8
CM1632CB from iCM(创芯微), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin (地); the datasheet groups pins 1 and 2 as GND and gives no separate limit for this pin. |
| 2 | GND | power_in | Ground pin (地); the datasheet groups pins 1 and 2 as GND and gives no separate limit for this pin. |
| 3 | VCC | power_in | Chip power supply pin; the absolute maximum rating for VCC to GND is -0.3 V to 9 V. |
| 4 | VIN | power_in | Supply input pin (供电输入); the absolute maximum rating for VIN is -0.7 V to 32 V. |
| 5 | VD | passive | Power MOSFET drain pin; the drain-to-ground withstand is -0.7 V to 100 V. |
| 6 | VD | passive | Power MOSFET drain pin; the drain-to-ground withstand is -0.7 V to 100 V. |
| 7 | VD | passive | Power MOSFET drain pin; the drain-to-ground withstand is -0.7 V to 100 V. |
| 8 | VD | passive | Power MOSFET drain pin; the drain-to-ground withstand is -0.7 V to 100 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | iCM(创芯微) |
| Package | SOP-8 |
| Category | |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入电压 | VIN | -0.7 | 32 | V | 4 | ||
| 电源到地耐压 | VCC | -0.3 | 9 | V | 4 | ||
| 漏极到地耐压 | VD | -0.7 | 100 | V | 4 | ||
| 最大工作频率 | FMAX | 300 | KHz | 4 | |||
| 热阻 | PTR1 | 150 | ℃/W | 4 | |||
| 存储温度 | Tstg | -55 | 150 | ℃ | 4 | ||
| 工作温度 | Operating | -20 | 125 | ℃ | 4 | ||
| 焊接温度 | Tsolder | 260 | ℃ | 10s | 4 | ||
| ESD 人体模式 | ESD | 4 | KV | 人体模式 | 4 | ||
| 开启电压 | VUVLO1 | 2.9 | 3.5 | 4.1 | V | VCC raising | 5 |
| 静态电流 | IQ | 200 | 325 | 450 | µA | 5 | |
| 同步整流开启阈值 | VON_TH | -300 | -200 | -100 | mV | 5 | |
| 漏源击穿电压 | BVDSS | 100 | V | VGS=0V,ID=250µA | 5 | ||
| 导通内阻 | RDSON | 10 | mΩ | VGS=10V,ID=35A | 5 | ||
| 输入电压 | VIN | 30 | V | 5 | |||
| 欠压迟滞 | VUVLO2 | 0.2 | V | 5 | |||
| 电源电压 | VCC | 7 | V | 5 | |||
| 驱动电压调整阈值 | VREG | -50 | mV | 5 | |||
| 同步整流关闭阈值 | VOFF_TH | -20 | mV | 5 | |||
| 同步整流关闭延时 | VOFF_DELAY | 12 | ns | 5 | |||
| 最小开启时间 | TON_MIN | 700 | us | 5 |
CAD (KiCad official)
- Symbol:
CM1632CB - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
cm1632cb-etched.step/cm1632cb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cm1632cb.step/cm1632cb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: iCM(创芯微) datasheet (9 pp, sha256
9afa048b532bc69f, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# CM1632CB
**iCM(创芯微)** · IC · SOP-8
CM1632CB from iCM(创芯微), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin (地); the datasheet groups pins 1 and 2 as GND and gives no separate limit for this pin. |
| 2 | GND | power_in | Ground pin (地); the datasheet groups pins 1 and 2 as GND and gives no separate limit for this pin. |
| 3 | VCC | power_in | Chip power supply pin; the absolute maximum rating for VCC to GND is -0.3 V to 9 V. |
| 4 | VIN | power_in | Supply input pin (供电输入); the absolute maximum rating for VIN is -0.7 V to 32 V. |
| 5 | VD | passive | Power MOSFET drain pin; the drain-to-ground withstand is -0.7 V to 100 V. |
| 6 | VD | passive | Power MOSFET drain pin; the drain-to-ground withstand is -0.7 V to 100 V. |
| 7 | VD | passive | Power MOSFET drain pin; the drain-to-ground withstand is -0.7 V to 100 V. |
| 8 | VD | passive | Power MOSFET drain pin; the drain-to-ground withstand is -0.7 V to 100 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | iCM(创芯微) |
| Package | SOP-8 |
| Category | |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 输入电压 | VIN | -0.7 | | 32 | V | | 4 |
| 电源到地耐压 | VCC | -0.3 | | 9 | V | | 4 |
| 漏极到地耐压 | VD | -0.7 | | 100 | V | | 4 |
| 最大工作频率 | FMAX | | | 300 | KHz | | 4 |
| 热阻 | PTR1 | | | 150 | ℃/W | | 4 |
| 存储温度 | Tstg | -55 | | 150 | ℃ | | 4 |
| 工作温度 | Operating | -20 | | 125 | ℃ | | 4 |
| 焊接温度 | Tsolder | | | 260 | ℃ | 10s | 4 |
| ESD 人体模式 | ESD | | | 4 | KV | 人体模式 | 4 |
| 开启电压 | VUVLO1 | 2.9 | 3.5 | 4.1 | V | VCC raising | 5 |
| 静态电流 | IQ | 200 | 325 | 450 | µA | | 5 |
| 同步整流开启阈值 | VON_TH | -300 | -200 | -100 | mV | | 5 |
| 漏源击穿电压 | BVDSS | | 100 | | V | VGS=0V,ID=250µA | 5 |
| 导通内阻 | RDSON | | 10 | | mΩ | VGS=10V,ID=35A | 5 |
| 输入电压 | VIN | | 30 | | V | | 5 |
| 欠压迟滞 | VUVLO2 | | 0.2 | | V | | 5 |
| 电源电压 | VCC | | 7 | | V | | 5 |
| 驱动电压调整阈值 | VREG | | -50 | | mV | | 5 |
| 同步整流关闭阈值 | VOFF_TH | | -20 | | mV | | 5 |
| 同步整流关闭延时 | VOFF_DELAY | | 12 | | ns | | 5 |
| 最小开启时间 | TON_MIN | | 700 | | us | | 5 |
## CAD (KiCad official)
- Symbol: `CM1632CB`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `cm1632cb-etched.step` / `cm1632cb-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cm1632cb.step` / `cm1632cb.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [iCM(创芯微) datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603386732259917824) (9 pp, sha256 `9afa048b532bc69f`, retrieved 2026-10-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cm1632cb-datasheet.pdf)