component
CM1106-SOPTA
Public Made by Adomby adom
CIMO Analog To Digital Converters (ADC), MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 14d ago |
| viewers | 14d ago |
| cm1106-sopta-etched.glb | 14d ago |
| cm1106-sopta-etched.step | 14d ago |
| cm1106-sopta-hero.glb | 14d ago |
| cm1106-sopta-hero.overlay.json | 14d ago |
| cm1106-sopta.glb | 14d ago |
| cm1106-sopta.kicad_mod | 14d ago |
| cm1106-sopta.kicad_sym | 14d ago |
| cm1106-sopta.lbr | 14d ago |
| cm1106-sopta.step | 14d ago |
| package.json | 14d ago |
| page.json | 14d ago |
| README.md | 14d ago |
CM1106-SOPTA
CIMO · Analog To Digital Converters (ADC) · MSOP-10
CM1106-SOPTA from CIMO, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SCLK | input | Serial clock input for the SPI interface; the controller should be set to CPOL=0, CPHA=1 so SCLK idles low. |
| 2 | CS | input | Chip select input, active low, which frames SPI communication; CS must go high after 16 SCLK cycles in 16-bit mode to reset the SPI interface. |
| 3 | GND | power_in | Ground reference for the device. |
| 4 | AIN0 | passive | Analog input 0; analog input voltages must stay within GND-0.3 V to VDD+0.3 V per the absolute maximum ratings. |
| 5 | AIN1 | passive | Analog input 1; analog input voltages must stay within GND-0.3 V to VDD+0.3 V per the absolute maximum ratings. |
| 6 | AIN2 | passive | Analog input 2; analog input voltages must stay within GND-0.3 V to VDD+0.3 V per the absolute maximum ratings. |
| 7 | AIN3 | passive | Analog input 3; analog input voltages must stay within GND-0.3 V to VDD+0.3 V per the absolute maximum ratings. |
| 8 | VDD | power_in | Power supply input; absolute maximum VDD is -0.3 V to 7 V and the operating supply range is 2.5 V to 5 V. |
| 9 | DOUT/DRDY | output | Serial data output or data-ready indicator, active low; it can be pulled up to VDD through an internal 400 kΩ resistor enabled by default in the CONFIG register. |
| 10 | DIN | input | Serial data input for the SPI interface, used to write CONFIG register data and read-back commands. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CIMO |
| Package | MSOP-10 |
| Category | Data Acquisition |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 工作温度 (Operating temperature) | -40 | 125 | °C | 5 | |||
| 存储温度 (Storage temperature) | -60 | 150 | °C | 5 | |||
| 结温 (Junction temperature) | -40 | 150 | °C | 5 | |||
| VDD 耐压 (Supply voltage) | VDD | -0.3 | 7 | V | 5 | ||
| 模拟输入 (Analog input voltage) | -0.3 | V | Printed as GND - 0.3 (min, referenced to GND); max printed as VDD + 0.3 V, not numeric so left null | 5 | |||
| 数字输入 (Digital input voltage) | -0.3 | 5.5 | V | Printed as GND - 0.3 to 5.5 V | 5 | ||
| 输入电流 (Input current) | -10 | 10 | mA | Any pin except supply pins (note 1); transient 100 mA does not cause latch-up | 5 | ||
| 数据速率误差 (Data rate error) | -10 | 10 | % | 所有数据速率 (all data rates) | 6 | ||
| 增益误差 (Gain error) | 0.01 | 0.15 | % | 差分输入, FSR = ±2.048V, TA = 25℃ | 6 | ||
| 增益温漂 (Gain drift) | 7 | 15.2 | ppm/℃ | 6 | |||
| 增益匹配 (Gain matching) | 0.02 | 0.2 | % | 任意两个增益之间的匹配 (between any two gains) | 6 | ||
| 增益通道匹配 (Gain channel matching) | 0.01 | 0.08 | % | 任意两个通道之间的匹配, FSR = ±2.048V | 6 | ||
| 输入失调误差 差分 (Input offset error, differential) | -3 | 0.4 | 3 | LSB | FSR = ±2.048V，差分输入 | 6 | |
| 输入失调电源抑制 (Input offset supply rejection) | 0.5 | 1.15 | LSB/V | 直流电源变化 (DC supply change) | 6 | ||
| VOL 输出低电平 (Digital output low voltage) | VOL | 0.15 | 0.3 | V | 6 | ||
| 输入漏电流 (Input leakage current) | -10 | 10 | μA | GND < VDIG < VDD | 6 | ||
| IVDD 断电模式电流 (Power-down current) | IVDD | 0.5 | 2 | μA | 断电模式， TA = 25℃ | 7 | |
| IVDD 转换模式电流 (Conversion mode current) | IVDD | 270 | 300 | μA | 转换模式，TA = 25℃ | 7 | |
| 温度传感器温度范围 (Temperature sensor range) | -40 | 125 | ℃ | 7 | |||
| 温度传感器精确度 (Temperature sensor accuracy) | -1 | 1 | ℃ | TA = 0℃~70℃ | 7 | ||
| 温度传感器精确度 (Temperature sensor accuracy) | -4 | 4 | ℃ | 7 |
CAD (KiCad official)
- Symbol:
CM1106-SOPTA - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
cm1106-sopta-etched.step/cm1106-sopta-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cm1106-sopta.step/cm1106-sopta.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CIMO datasheet (22 pp, sha256
50abb6ecb23887c3, retrieved 2026-10-20, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).