component
CM1048-QT
Public Made by Adomby adom
iCM(创芯微) Battery Management, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
CM1048-QT
iCM(创芯微) · Battery Management · TSSOP-16
CM1048-QT from iCM(创芯微), in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Positive supply input and positive voltage connection of cell 4; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 2 | VC4 | power_in | Positive voltage connection for cell 4; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 3 | VC4 | power_in | Positive voltage connection for cell 4 (second VC4 pin in the table); the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 4 | VC3 | power_in | Negative voltage of cell 4 and positive voltage connection of cell 3; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 5 | VC2 | power_in | Negative voltage of cell 3 and positive voltage connection of cell 2; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 6 | VC1 | power_in | Negative voltage of cell 2 and positive voltage connection of cell 1; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 7 | VSS | power_in | Chip ground and negative voltage connection of cell 1. |
| 8 | SEL | input | Series-count selection terminal for 3-cell or 4-cell operation; the absolute maximum rating is VSS-0.3 V to VSS+5.0 V. |
| 9 | TEC | input | Discharge over-current delay adjustment terminal, where the delay is set by an external capacitor CTEC (TEC1 = 10 × CTEC in ms, with CTEC in nF); the absolute maximum rating is VSS-0.3 V to VSS+5.0 V. |
| 10 | CLR | input | Resistor connection to the NTC for setting the charge low-temperature protection point; the absolute maximum rating is VSS-0.3 V to VSS+5.0 V. |
| 11 | DHR | input | Resistor connection to the NTC for setting the discharge high-temperature protection point; the absolute maximum rating is VSS-0.3 V to VSS+5.0 V. |
| 12 | CHR | input | Resistor connection to the NTC for setting the charge high-temperature protection point; the absolute maximum rating is VSS-0.3 V to VSS+5.0 V. |
| 13 | VINI | input | Over-current detection input for charge and discharge current sensing; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 14 | DO | output | Discharge MOSFET control output; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 15 | CO | output | Charge MOSFET control output; the absolute maximum rating is VSS-30 V to VSS+30 V. |
| 16 | VM | input | Charger and load detection terminal; the absolute maximum rating is VSS-30 V to VSS+30 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | iCM(创芯微) |
| Package | TSSOP-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 正常工作电流 (Normal operating current) | IVCC | 10 | 15 | μA | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V | 7 | |
| 过充电保护延时 (Overcharge detection delay) | TOC | 0.7 | 1 | 1.3 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 4.4V | 7 |
| 过充电解除延时 (Overcharge release delay) | TOCR | 180 | 256 | 332 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 4.4 → 3.5V | 7 |
| 过放电解除电压 (Overdischarge release voltage, CM1048-QT VODR=3.000 V) | VODR | -0.08 | 3 | 0.08 | V | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 2.0 → 3.5V | 7 |
| 过放电保护延时 (Overdischarge detection delay) | TOD | 0.7 | 1 | 1.3 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 2.0V | 7 |
| 过放电解除延时 (Overdischarge release delay) | TODR | 179 | 256 | 333 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 2.0 → 3.5V | 7 |
| 低压禁充电压 (Low-voltage charge inhibit voltage) | VLV | 1.125 | 1.5 | 1.875 | V | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 1.2V | 7 |
| 低压禁充解除电压 (Low-voltage charge inhibit release voltage) | VLVR | 1.1 | 1.52 | 1.94 | V | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 1.2 → 3.5V | 7 |
| 低压禁充延时 (Low-voltage charge inhibit delay) | TLV | 1 | 1.5 | 2 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 1.2V | 7 |
| 放电过流1保护电压 (Discharge overcurrent 1 voltage, CM1048-QT VEC1=0.050 V) | VEC1 | -0.005 | 0.05 | 0.005 | V | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.18V | 7 |
| 放电过流1保护延时 (Discharge overcurrent 1 delay) | TEC1 | 0.7 | 1 | 1.3 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.18V, CTEC=0.1μF (±1%) | 7 |
| 放电过流2保护电压 (Discharge overcurrent 2 voltage, CM1048-QT VEC2=0.100 V) | VEC2 | -0.01 | 0.1 | 0.01 | V | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.35V | 7 |
| 放电过流2保护延时 (Discharge overcurrent 2 delay) | TEC2 | 70 | 100 | 130 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.35V, CTEC=0.1μF (±1%) | 7 |
| 短路保护延时 (Short-circuit protection delay) | TSHORT | 150 | 250 | 350 | μs | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.8V | 7 |
| 放电过流解除延时 (Discharge overcurrent release delay) | TECR | 22 | 32 | 42 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0.8 → 0V | 7 |
| 充电过流保护延时 (Charge overcurrent protection delay) | TCHA | 180 | 256 | 332 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → -1.0V | 8 |
| 充电过流解除延时 (Charge overcurrent release delay) | TCHAR | 45 | 64 | 83 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = -1V → 0V | 8 |
| 充电高温保护温度 (Charge high-temperature protection temperature) | TCH | -3 | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 1k | 8 | |
| 充电高温解除温度 (Charge high-temperature release temperature) | TCHR | -3 | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 1k → 10k | 8 | |
| 放电高温保护温度 (Discharge high-temperature protection temperature) | TDH | -3 | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 1k | 8 | |
| 放电高温解除温度 (Discharge high-temperature release temperature) | TDHR | -3 | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 1k → 10k | 8 | |
| 充电高温保护延时 (Charge high-temperature protection delay) | DTCH | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 1k | 8 |
| 充电高温解除延时 (Charge high-temperature release delay) | DTCHR | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 1k → 10k | 8 |
| 放电高温保护延时 (Discharge high-temperature protection delay) | DTDH | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 1k | 8 |
| 放电高温解除延时 (Discharge high-temperature release delay) | DTDHR | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 1k → 10k | 8 |
| 充电低温保护温度 (Charge low-temperature protection temperature) | TCL | -3 | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 3M | 8 | |
| 充电低温解除温度 (Charge low-temperature release temperature) | TCLR | -3 | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 3M → 10k | 8 | |
| 放电低温保护温度 (Discharge low-temperature protection temperature) | TDL | -3 | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 3M | 8 | |
| 放电低温解除温度 (Discharge low-temperature release temperature) | TDLR | -3 | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 3M → 10k | 8 | |
| 充电低温保护延时 (Charge low-temperature protection delay) | DTCL | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 3M | 8 |
| 充电低温解除延时 (Charge low-temperature release delay) | DTCLR | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 3M → 10k | 8 |
| 放电低温保护延时 (Discharge low-temperature protection delay) | DTDL | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 3M | 8 |
| 放电低温解除延时 (Discharge low-temperature release delay) | DTDLR | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 3M → 10k | 8 |
| 放电状态检测电压 (Discharge status detection voltage) | VSTS | 1 | 4 | 7 | mV | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 10mV | 9 |
| 放电状态检测延时 (Discharge status detection delay) | TSTS | 3 | 4.5 | 6 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 10mV | 9 |
| 休眠延时 (Sleep entry delay) | TSLP | 22 | 32 | 42 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 1.5V | 9 |
| 电源电压 (Supply voltage VCC, absolute maximum) | VCC | -0.3 | 30 | V | Referenced to VSS (printed VSS-0.3 ~ VSS+30 V) | 6 | |
| 输入电压0 (Cell input voltage VCn, absolute maximum) | VCELL | -0.3 | 30 | V | Referenced to VSS (printed VSS-0.3 ~ VSS+30 V); terminals VCn (n=1~4) | 6 | |
| 输入电压1 (SEL, TEC, CLR, DHR, CHR, absolute maximum) | VIN1 | -0.3 | 5 | V | Referenced to VSS (printed VSS-0.3 ~ VSS+5.0 V) | 6 | |
| 输入电压2 (VM, CO, absolute maximum) | VIN2 | -30 | 30 | V | Referenced to VSS (printed VSS-30 ~ VSS+30 V) | 6 | |
| 输入电压3 (DO, VINI, absolute maximum) | VIN3 | -0.3 | 30 | V | Referenced to VSS (printed VSS-0.3 ~ VSS+30 V) | 6 | |
| 工作环境温度 (Operating ambient temperature) | TOPR | -40 | 85 | °C | 6 | ||
| 保存温度范围 (Storage temperature range) | TSTG | -55 | 125 | °C | 6 | ||
| 正常工作电流 (Normal operating current, Ta -40~+85°C) | IVCC | 10 | 18 | μA | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V | 10 | |
| 过放电解除电压 (Overdischarge release voltage, Ta -40~+85°C) | VODR | -0.1 | 3 | 0.1 | V | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 2.0 → 3.5V | 10 |
| 低压禁充电压 (Low-voltage charge inhibit voltage, Ta -40~+85°C) | VLV | 1 | 1.5 | 2 | V | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 1.2V | 10 |
| 低压禁充解除电压 (Low-voltage charge inhibit release voltage, Ta -40~+85°C) | VLVR | 0.99 | 1.52 | 2.05 | V | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 1.2 → 3.5V | 10 |
| 放电过流2保护电压 (Discharge overcurrent 2 voltage, Ta -40~+85°C, CM1048-QT VEC2=0.100 V) | VEC2 | -0.02 | 0.1 | 0.02 | V | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.35V | 10 |
| 充电高温保护温度 (Charge high-temperature protection temperature, Ta -40~+85°C) | TCH | -5 | 5 | °C | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 1k | 11 |
CAD (KiCad official)
- Symbol:
CM1048-QT - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
cm1048-qt-etched.step/cm1048-qt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cm1048-qt.step/cm1048-qt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: iCM(创芯微) datasheet (21 pp, sha256
7d286fab1c0c4dd9, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# CM1048-QT
**iCM(创芯微)** · Battery Management · TSSOP-16
CM1048-QT from iCM(创芯微), in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Positive supply input and positive voltage connection of cell 4; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 2 | VC4 | power_in | Positive voltage connection for cell 4; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 3 | VC4 | power_in | Positive voltage connection for cell 4 (second VC4 pin in the table); the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 4 | VC3 | power_in | Negative voltage of cell 4 and positive voltage connection of cell 3; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 5 | VC2 | power_in | Negative voltage of cell 3 and positive voltage connection of cell 2; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 6 | VC1 | power_in | Negative voltage of cell 2 and positive voltage connection of cell 1; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 7 | VSS | power_in | Chip ground and negative voltage connection of cell 1. |
| 8 | SEL | input | Series-count selection terminal for 3-cell or 4-cell operation; the absolute maximum rating is VSS-0.3 V to VSS+5.0 V. |
| 9 | TEC | input | Discharge over-current delay adjustment terminal, where the delay is set by an external capacitor CTEC (TEC1 = 10 × CTEC in ms, with CTEC in nF); the absolute maximum rating is VSS-0.3 V to VSS+5.0 V. |
| 10 | CLR | input | Resistor connection to the NTC for setting the charge low-temperature protection point; the absolute maximum rating is VSS-0.3 V to VSS+5.0 V. |
| 11 | DHR | input | Resistor connection to the NTC for setting the discharge high-temperature protection point; the absolute maximum rating is VSS-0.3 V to VSS+5.0 V. |
| 12 | CHR | input | Resistor connection to the NTC for setting the charge high-temperature protection point; the absolute maximum rating is VSS-0.3 V to VSS+5.0 V. |
| 13 | VINI | input | Over-current detection input for charge and discharge current sensing; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 14 | DO | output | Discharge MOSFET control output; the absolute maximum rating is VSS-0.3 V to VSS+30 V. |
| 15 | CO | output | Charge MOSFET control output; the absolute maximum rating is VSS-30 V to VSS+30 V. |
| 16 | VM | input | Charger and load detection terminal; the absolute maximum rating is VSS-30 V to VSS+30 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | iCM(创芯微) |
| Package | TSSOP-16 |
| Category | Power Management (PMIC) |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 正常工作电流 (Normal operating current) | IVCC | | 10 | 15 | μA | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V | 7 |
| 过充电保护延时 (Overcharge detection delay) | TOC | 0.7 | 1 | 1.3 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 4.4V | 7 |
| 过充电解除延时 (Overcharge release delay) | TOCR | 180 | 256 | 332 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 4.4 → 3.5V | 7 |
| 过放电解除电压 (Overdischarge release voltage, CM1048-QT VODR=3.000 V) | VODR | -0.08 | 3 | 0.08 | V | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 2.0 → 3.5V | 7 |
| 过放电保护延时 (Overdischarge detection delay) | TOD | 0.7 | 1 | 1.3 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 2.0V | 7 |
| 过放电解除延时 (Overdischarge release delay) | TODR | 179 | 256 | 333 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 2.0 → 3.5V | 7 |
| 低压禁充电压 (Low-voltage charge inhibit voltage) | VLV | 1.125 | 1.5 | 1.875 | V | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 1.2V | 7 |
| 低压禁充解除电压 (Low-voltage charge inhibit release voltage) | VLVR | 1.1 | 1.52 | 1.94 | V | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 1.2 → 3.5V | 7 |
| 低压禁充延时 (Low-voltage charge inhibit delay) | TLV | 1 | 1.5 | 2 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 1.2V | 7 |
| 放电过流1保护电压 (Discharge overcurrent 1 voltage, CM1048-QT VEC1=0.050 V) | VEC1 | -0.005 | 0.05 | 0.005 | V | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.18V | 7 |
| 放电过流1保护延时 (Discharge overcurrent 1 delay) | TEC1 | 0.7 | 1 | 1.3 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.18V, CTEC=0.1μF (±1%) | 7 |
| 放电过流2保护电压 (Discharge overcurrent 2 voltage, CM1048-QT VEC2=0.100 V) | VEC2 | -0.01 | 0.1 | 0.01 | V | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.35V | 7 |
| 放电过流2保护延时 (Discharge overcurrent 2 delay) | TEC2 | 70 | 100 | 130 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.35V, CTEC=0.1μF (±1%) | 7 |
| 短路保护延时 (Short-circuit protection delay) | TSHORT | 150 | 250 | 350 | μs | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.8V | 7 |
| 放电过流解除延时 (Discharge overcurrent release delay) | TECR | 22 | 32 | 42 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0.8 → 0V | 7 |
| 充电过流保护延时 (Charge overcurrent protection delay) | TCHA | 180 | 256 | 332 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → -1.0V | 8 |
| 充电过流解除延时 (Charge overcurrent release delay) | TCHAR | 45 | 64 | 83 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = -1V → 0V | 8 |
| 充电高温保护温度 (Charge high-temperature protection temperature) | TCH | -3 | | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 1k | 8 |
| 充电高温解除温度 (Charge high-temperature release temperature) | TCHR | -3 | | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 1k → 10k | 8 |
| 放电高温保护温度 (Discharge high-temperature protection temperature) | TDH | -3 | | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 1k | 8 |
| 放电高温解除温度 (Discharge high-temperature release temperature) | TDHR | -3 | | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 1k → 10k | 8 |
| 充电高温保护延时 (Charge high-temperature protection delay) | DTCH | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 1k | 8 |
| 充电高温解除延时 (Charge high-temperature release delay) | DTCHR | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 1k → 10k | 8 |
| 放电高温保护延时 (Discharge high-temperature protection delay) | DTDH | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 1k | 8 |
| 放电高温解除延时 (Discharge high-temperature release delay) | DTDHR | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 1k → 10k | 8 |
| 充电低温保护温度 (Charge low-temperature protection temperature) | TCL | -3 | | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 3M | 8 |
| 充电低温解除温度 (Charge low-temperature release temperature) | TCLR | -3 | | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 3M → 10k | 8 |
| 放电低温保护温度 (Discharge low-temperature protection temperature) | TDL | -3 | | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 3M | 8 |
| 放电低温解除温度 (Discharge low-temperature release temperature) | TDLR | -3 | | 3 | °C | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 3M → 10k | 8 |
| 充电低温保护延时 (Charge low-temperature protection delay) | DTCL | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 3M | 8 |
| 充电低温解除延时 (Charge low-temperature release delay) | DTCLR | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 3M → 10k | 8 |
| 放电低温保护延时 (Discharge low-temperature protection delay) | DTDL | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 3M | 8 |
| 放电低温解除延时 (Discharge low-temperature release delay) | DTDLR | 1.05 | 1.5 | 1.95 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 3M → 10k | 8 |
| 放电状态检测电压 (Discharge status detection voltage) | VSTS | 1 | 4 | 7 | mV | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 10mV | 9 |
| 放电状态检测延时 (Discharge status detection delay) | TSTS | 3 | 4.5 | 6 | ms | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 10mV | 9 |
| 休眠延时 (Sleep entry delay) | TSLP | 22 | 32 | 42 | s | Ta=+25°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 1.5V | 9 |
| 电源电压 (Supply voltage VCC, absolute maximum) | VCC | -0.3 | | 30 | V | Referenced to VSS (printed VSS-0.3 ~ VSS+30 V) | 6 |
| 输入电压0 (Cell input voltage VCn, absolute maximum) | VCELL | -0.3 | | 30 | V | Referenced to VSS (printed VSS-0.3 ~ VSS+30 V); terminals VCn (n=1~4) | 6 |
| 输入电压1 (SEL, TEC, CLR, DHR, CHR, absolute maximum) | VIN1 | -0.3 | | 5 | V | Referenced to VSS (printed VSS-0.3 ~ VSS+5.0 V) | 6 |
| 输入电压2 (VM, CO, absolute maximum) | VIN2 | -30 | | 30 | V | Referenced to VSS (printed VSS-30 ~ VSS+30 V) | 6 |
| 输入电压3 (DO, VINI, absolute maximum) | VIN3 | -0.3 | | 30 | V | Referenced to VSS (printed VSS-0.3 ~ VSS+30 V) | 6 |
| 工作环境温度 (Operating ambient temperature) | TOPR | -40 | | 85 | °C | | 6 |
| 保存温度范围 (Storage temperature range) | TSTG | -55 | | 125 | °C | | 6 |
| 正常工作电流 (Normal operating current, Ta -40~+85°C) | IVCC | | 10 | 18 | μA | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V | 10 |
| 过放电解除电压 (Overdischarge release voltage, Ta -40~+85°C) | VODR | -0.1 | 3 | 0.1 | V | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 2.0 → 3.5V | 10 |
| 低压禁充电压 (Low-voltage charge inhibit voltage, Ta -40~+85°C) | VLV | 1 | 1.5 | 2 | V | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5 → 1.2V | 10 |
| 低压禁充解除电压 (Low-voltage charge inhibit release voltage, Ta -40~+85°C) | VLVR | 0.99 | 1.52 | 2.05 | V | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 1.2 → 3.5V | 10 |
| 放电过流2保护电压 (Discharge overcurrent 2 voltage, Ta -40~+85°C, CM1048-QT VEC2=0.100 V) | VEC2 | -0.02 | 0.1 | 0.02 | V | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, VINI = 0 → 0.35V | 10 |
| 充电高温保护温度 (Charge high-temperature protection temperature, Ta -40~+85°C) | TCH | -5 | | 5 | °C | Ta=-40°C~+85°C; VCn - VCn+1 = 3.5V, VC1-VSS = 3.5V, RNTC = 10k → 1k | 11 |
## CAD (KiCad official)
- Symbol: `CM1048-QT`
- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`
- 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files: `cm1048-qt-etched.step` / `cm1048-qt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cm1048-qt.step` / `cm1048-qt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [iCM(创芯微) datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603349403717410816) (21 pp, sha256 `7d286fab1c0c4dd9`, retrieved 2026-10-17, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cm1048-qt-datasheet.pdf)