component
CM1010-L
Public Made by Adomby adom
iCM(创芯微) , SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCM1010-L
iCM(创芯微) · IC · SOT-23-6
CM1010-L from iCM(创芯微), in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected (no internal connection stated in the datasheet). |
| 2 | VCC | power_in | Power supply input connected to the positive terminal of the battery cell; the device monitors VCC to VSS and absolute maximum VCC is -0.3 V to 6.0 V. |
| 3 | VSS | power_in | Power ground connected to the negative terminal of the battery cell, the reference for the VCC voltage monitoring. |
| 4 | NC | unconnected | Not connected (no internal connection stated in the datasheet). |
| 5 | NC | unconnected | Not connected (no internal connection stated in the datasheet). |
| 6 | CO | output | Balance control output that drives the gate of the external balancing N-MOSFET; it stays low in normal operation, goes high to start balancing, and its absolute maximum input voltage is -0.3 V to 6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | iCM(创芯微) |
| Package | SOT-23-6 |
| Category | |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 正常工作电流 (Normal operating current) | IVCC | 1.8 | 3.5 | μA | VCC =3.5V | 5 | |
| 休眠电流 (Sleep current) | IPDN | 0.05 | 0.2 | μA | VCC =1.5V | 5 | |
| 平衡启动电压 (Balance start voltage) | VOC | 4.125 | 4.15 | 4.175 | V | VCC =3.5→4.5V | 5 |
| 启动延时 (Start delay) | TOC | 125 | 250 | 375 | ms | VCC =3.5→4.5V | 5 |
| 关断电压 (Balance release voltage) | VOCR | 4.09 | 4.14 | 4.19 | V | VCC =4.5→3.5V | 5 |
| 待机启动电压 (Standby start voltage) | VPDN | 2.3 | 2.7 | 3.1 | V | 5 | |
| CO 端驱动能力 低电平输出电压 (CO drive low output voltage) | VCOL | 0.1 | 0.3 | V | 5 | ||
| 电源电压 (Supply voltage, absolute maximum) | VCC | -0.3 | 6 | V | 4 | ||
| CO 端输入电压 (CO input voltage, absolute maximum) | CO | -0.3 | 6 | V | 4 | ||
| 工作环境温度 (Operating ambient temperature) | TOPR | -40 | 85 | °C | 4 | ||
| 储存温度范围 (Storage temperature range) | TSTG | -55 | 125 | °C | 4 |
CAD (KiCad official)
- Symbol:
CM1010-L - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
cm1010-l-etched.step/cm1010-l-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cm1010-l.step/cm1010-l.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: iCM(创芯微) datasheet (11 pp, sha256
ab2366c845486881, retrieved 2026-10-17, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).