component
CJ7805B-TCN-ATG
Public Made by Adomby adom
Changjing Linear Voltage Regulators (LDO), TO-220F. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCJ7805B-TCN-ATG
Changjing · Linear Voltage Regulators (LDO) · TO-220F
CJ7805B-TCN-ATG from Changjing, in a TO-220F. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Input of the device; the recommended input voltage range for CJ7805B is stated as a maximum of 25 V. |
| 2 | GND | power_in | Regulator ground, the common reference terminal for the regulator. |
| 3 | OUT | power_out | Output of the device, with a maximum output current of 1.0 A stated in the absolute maximum ratings. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Changjing |
| Package | TO-220F |
| Category | Power Management |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage | VOUT | 4.9 | 5 | 5.1 | V | TJ = 25°C, ±2% grade | 10 |
| Output voltage over line, load and temperature | VOUT | 4.8 | 5 | 5.2 | V | IOUT = 5mA to 1A, VIN = 7.5 to 20V, TJ = -40 to 125°C, PD ≤ 15W | 10 |
| Line regulation | ΔVRLINE | 25 | 50 | mV | VIN = 7.5 to 20V, IOUT = 500mA | 10 | |
| Load regulation | ΔVRLOAD | 20 | 50 | mV | VIN = 10V, IOUT = 5mA to 1A | 10 | |
| Quiescent current | IQ | 3.2 | 6 | mA | VIN = 10V, TJ = -40 to 125°C, IOUT = 0mA | 10 | |
| Quiescent current change | ΔIQ | 0.1 | 0.8 | mA | VIN = 10V, IOUT = 5mA to 1A | 10 | |
| Quiescent current change | ΔIQ | 0.3 | 0.8 | mA | VIN = 8 to 25V, IOUT = 500mA | 10 | |
| Short circuit current | ISC | 50 | mA | VIN = 35V, TA = 25°C | 10 | ||
| Output voltage temperature coefficient | ΔVOUT / ΔT | 0.4 | mV/°C | 10 | |||
| Output voltage temperature coefficient | ΔVOUT / (VOUT × ΔT) | 80 | ppm/°C | 10 | |||
| Output noise voltage | VN | 10 | μV / VO | f = 10 to 100k Hz, TA = 25°C | 10 | ||
| Ripple rejection | RR | 70 | dB | f = 120Hz, VIN = 8 to 18V, IOUT = 500mA | 10 | ||
| Dropout voltage | VD | 2 | V | IOUT = 1A | 10 | ||
| Output resistance | ROUT | 10 | mΩ | f = 1kHz | 10 | ||
| Peak current | IPK | 2.2 | A | VIN = 10V | 10 | ||
| Input voltage range | VIN | 25 | V | CJ7805B | 8 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 8 | ||
| Maximum input voltage range | VIN MAX | 36 | V | All voltages with respect to network ground terminal | 8 | ||
| Maximum output current | IOUT MAX | 1 | A | 8 | |||
| Maximum junction temperature | TJ Max | 150 | °C | 8 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 8 | ||
| Junction-to-ambient thermal resistance (TO-220F) | RΘJA | 66.4 | °C/W | TO-220F; TA = 25°C, typical, PCB in still air | 9 | ||
| Junction-to-case thermal resistance (TO-220F) | RΘJC | 6.2 | °C/W | TO-220F | 9 | ||
| Reference maximum power dissipation (TO-220F) | PD Ref | 1.51 | W | TO-220F; continuous operation | 9 |
CAD (KiCad official)
- Symbol:
CJ7805B-TCN-ATG - Footprint:
Package_TO_SOT_THT:TO-220F-3_Vertical - 3D model: TO-220F (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Changjing datasheet (33 pp, sha256
2bf7e0142c58a2c8, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).