component
CJ6376B50M
Public Made by Adomby adom
Changjing Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 8d ago |
| viewers | 8d ago |
| cj6376b50m-etched.glb | 8d ago |
| cj6376b50m-etched.step | 8d ago |
| cj6376b50m-hero.glb | 8d ago |
| cj6376b50m-hero.overlay.json | 8d ago |
| cj6376b50m.glb | 8d ago |
| cj6376b50m.kicad_mod | 8d ago |
| cj6376b50m.kicad_sym | 8d ago |
| cj6376b50m.lbr | 8d ago |
| cj6376b50m.step | 8d ago |
| package.json | 8d ago |
| page.json | 8d ago |
| README.md | 8d ago |
CJ6376B50M
Changjing · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5L
CJ6376B50M from Changjing, in a SOT-23-5L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input to the device; the recommended input capacitor should be placed as close to the IN and GND pins as possible for the best transient response and minimum input impedance. |
| 2 | GND | power_in | Regulator ground. |
| 3 | EN | input | Enable pin: driving it logic high enables the device and logic low disables it; do not float this pin, and if enable is not required it must be connected to IN. |
| 4 | NC | unconnected | No internal connection; this pin can float, and the device has better thermal performance when it is connected to the ground plane. |
| 5 | OUT | power_out | Regulator output; an output capacitor must be placed between OUT and GND, as close as possible to those pins, to maintain output stability and transient response. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Changjing |
| Package | SOT-23-5L |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 2.5 | 36 | V | 11 | ||
| DC output tolerance | -2 | 2 | % | TJ = 25°C, IOUT = 1mA | 11 | ||
| Available output voltage | 2.1 | 12 | V | 11 | |||
| Output current | IOUT | 300 | mA | TJ = 25°C | 11 | ||
| Quiescent current | IQ | 2 | 5 | µA | IOUT = 0mA, VOUT < 7.0V | 11 | |
| Line regulation | LNR | 0.01 | 0.3 | %/V | VIN = VOUT +1V to 36V, IOUT = 10mA | 11 | |
| Output current limit | ILimit | 350 | 600 | mA | VOUT = 0.5 × VOUT Normal, VIN = 5.0V | 11 | |
| Standby current | ISTBY | 0.5 | µA | EN = GND | 11 | ||
| EN high | VEN H | 1.5 | V | 11 | |||
| EN low | VEN Low | 0.3 | V | 11 | |||
| Input voltage range | VIN | 2.5 | 36 | V | 9 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 9 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | 9 | ||
| Input voltage range | VIN | -0.3 | 40 | V | 9 | ||
| Enable input voltage range | VEN | -0.3 | 40 | V | 9 | ||
| Output voltage range | VOUT | -0.3 | 13 | V | 9 | ||
| Maximum junction temperature | TJ Max | 150 | °C | 9 | |||
| Storage temperature | Tstg | -60 | 150 | °C | 9 | ||
| Soldering temperature & time | Tsolder | 260 | °C | 10 s | 9 | ||
| Junction-to-ambient thermal resistance | RΘJA | 250.3 | °C/W | SOT-23-5L; still air, TA = 25°C, 1 in² FR-4 PCB, 2 oz copper | 10 | ||
| Junction-to-case thermal resistance | RΘJC | 65.4 | °C/W | SOT-23-5L; still air, TA = 25°C, 1 in² FR-4 PCB, 2 oz copper | 10 | ||
| Reference maximum power dissipation for continuous operation | PD Ref | 0.4 | W | SOT-23-5L; still air, TA = 25°C, 1 in² FR-4 PCB, 2 oz copper | 10 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | • Place the input and output capacitors as close to the pins of the device as possible; • The device is connected by copper plane and the heat sink (or back pad) of the device is fully welded with | 24 |
CAD (KiCad official)
- Symbol:
CJ6376B50M - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5L (KiCad packages3D, STEP)
- 3D model files:
cj6376b50m-etched.step/cj6376b50m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cj6376b50m.step/cj6376b50m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Changjing datasheet (36 pp, sha256
cc2469086119e728, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).