component
CJ6336-M3N-5.0
Public Made by Adomby adom
Changjing Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-3L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
CJ6336-M3N-5.0
Changjing · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3L
CJ6336-M3N-5.0 from Changjing, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin; place the input and output capacitors as close as possible between this pin and IN/OUT. |
| 2 | OUT | power_out | Regulated fixed 5.0V output (±2% at 25°C) delivering up to 200mA, with a recommended 10µF capacitor to GND and absolute maximum of 26V. |
| 3 | IN | power_in | Supply input accepting 2.5V to 26V (absolute maximum 30V), with a recommended 10µF capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Changjing |
| Package | SOT-23-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 2.5 | 26 | V | TA = 25°C | 7 | |
| DC output tolerance | -2 | 2 | % | TJ = 25°C, IOUT = 10mA | 7 | ||
| Output current | IOUT | 200 | mA | TJ = 25°C | 7 | ||
| Quiescent current | IQ | 1.5 | 3 | µA | IOUT = 0mA | 7 | |
| Dropout voltage | VDO | 600 | 800 | mV | VOUT = 3.0 to 3.6V, IOUT = 100mA | 7 | |
| Line regulation | LNR | 0.01 | 0.2 | %/V | VIN = VOUT +2V to 26V, IOUT = 1mA | 7 | |
| Load regulation | ΔVLOAD | 25 | 60 | mV | VIN = VOUT +2V, IOUT = 1 to 100mA | 7 | |
| Output current limit | ILimit | 250 | 350 | mA | VIN = VOUT +2V | 7 | |
| Output voltage temperature characteristics | TR | 100 | ppm/°C | VIN = VOUT +2V, IOUT = 10mA, TA = -40 to 85°C | 7 | ||
| Short current | IShort | 120 | mA | OUT short to GND | 7 | ||
| Power supply rejection ratio | PSRR | 65 | dB | VIN = (VOUT +2V) DC + 1VPP AC, IOUT = 50mA, f = 100Hz | 7 | ||
| Power supply rejection ratio | PSRR | 50 | dB | VIN = (VOUT +2V) DC + 1VPP AC, IOUT = 50mA, f = 1kHz | 7 | ||
| Thermal shutdown | TSD | 150 | °C | 7 | |||
| Thermal shutdown hysteresis | ∆TSD | 20 | °C | 7 | |||
| Input voltage range | VIN | -0.3 | 30 | V | TA = 25°C | 5 | |
| Output voltage range | VOUT | -0.3 | 26 | V | TA = 25°C | 5 | |
| Maximum junction temperature | TJ Max | 125 | °C | TA = 25°C | 5 | ||
| Storage temperature | Tstg | -50 | 125 | °C | TA = 25°C | 5 | |
| Soldering temperature & time | Tsolder | 260 | °C | 10s | 5 | ||
| Input voltage | VIN | 2.5 | 26 | V | 5 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Operating ambient temperature | TA | -40 | 85 | °C | 5 | ||
| ESD human body model | VESD-HBM | 2000 | V | 5 | |||
| ESD machine model | VESD-MM | 200 | V | 5 | |||
| Junction-to-ambient thermal resistance | RΘJA | 266.3 | °C/W | SOT-23-3L | 6 | ||
| Junction-to-case thermal resistance | RΘJC | 66.3 | °C/W | SOT-23-3L | 6 | ||
| Reference maximum power dissipation | PD Ref | 0.38 | W | SOT-23-3L | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | • Place the input and output capacitors as close to the pins of the device as possible; • The device is connected by copper plane and the heat sink (or back pad) of the device is fully welded with | 12 |
CAD (KiCad official)
- Symbol:
CJ6336-M3N-5.0 - Footprint:
Package_TO_SOT_SMD:SOT-23-3 - 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files:
cj6336-m3n-5-0-etched.step/cj6336-m3n-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);cj6336-m3n-5-0.step/cj6336-m3n-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Changjing datasheet (18 pp, sha256
8a039caed9d7eb5b, retrieved 2026-10-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# CJ6336-M3N-5.0
**Changjing** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-3L
CJ6336-M3N-5.0 from Changjing, in a SOT-23-3L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin; place the input and output capacitors as close as possible between this pin and IN/OUT. |
| 2 | OUT | power_out | Regulated fixed 5.0V output (±2% at 25°C) delivering up to 200mA, with a recommended 10µF capacitor to GND and absolute maximum of 26V. |
| 3 | IN | power_in | Supply input accepting 2.5V to 26V (absolute maximum 30V), with a recommended 10µF capacitor to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Changjing |
| Package | SOT-23-3L |
| Category | Power Management (PMIC) |
| Pins | 3 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage | VIN | 2.5 | | 26 | V | TA = 25°C | 7 |
| DC output tolerance | | -2 | | 2 | % | TJ = 25°C, IOUT = 10mA | 7 |
| Output current | IOUT | 200 | | | mA | TJ = 25°C | 7 |
| Quiescent current | IQ | | 1.5 | 3 | µA | IOUT = 0mA | 7 |
| Dropout voltage | VDO | | 600 | 800 | mV | VOUT = 3.0 to 3.6V, IOUT = 100mA | 7 |
| Line regulation | LNR | | 0.01 | 0.2 | %/V | VIN = VOUT +2V to 26V, IOUT = 1mA | 7 |
| Load regulation | ΔVLOAD | | 25 | 60 | mV | VIN = VOUT +2V, IOUT = 1 to 100mA | 7 |
| Output current limit | ILimit | 250 | 350 | | mA | VIN = VOUT +2V | 7 |
| Output voltage temperature characteristics | TR | | 100 | | ppm/°C | VIN = VOUT +2V, IOUT = 10mA, TA = -40 to 85°C | 7 |
| Short current | IShort | | 120 | | mA | OUT short to GND | 7 |
| Power supply rejection ratio | PSRR | | 65 | | dB | VIN = (VOUT +2V) DC + 1VPP AC, IOUT = 50mA, f = 100Hz | 7 |
| Power supply rejection ratio | PSRR | | 50 | | dB | VIN = (VOUT +2V) DC + 1VPP AC, IOUT = 50mA, f = 1kHz | 7 |
| Thermal shutdown | TSD | | 150 | | °C | | 7 |
| Thermal shutdown hysteresis | ∆TSD | | 20 | | °C | | 7 |
| Input voltage range | VIN | -0.3 | | 30 | V | TA = 25°C | 5 |
| Output voltage range | VOUT | -0.3 | | 26 | V | TA = 25°C | 5 |
| Maximum junction temperature | TJ Max | | | 125 | °C | TA = 25°C | 5 |
| Storage temperature | Tstg | -50 | | 125 | °C | TA = 25°C | 5 |
| Soldering temperature & time | Tsolder | | | 260 | °C | 10s | 5 |
| Input voltage | VIN | 2.5 | | 26 | V | | 5 |
| Operating junction temperature | TJ | -40 | | 125 | °C | | 5 |
| Operating ambient temperature | TA | -40 | | 85 | °C | | 5 |
| ESD human body model | VESD-HBM | | | 2000 | V | | 5 |
| ESD machine model | VESD-MM | | | 200 | V | | 5 |
| Junction-to-ambient thermal resistance | RΘJA | | 266.3 | | °C/W | SOT-23-3L | 6 |
| Junction-to-case thermal resistance | RΘJC | | 66.3 | | °C/W | SOT-23-3L | 6 |
| Reference maximum power dissipation | PD Ref | | 0.38 | | W | SOT-23-3L | 6 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | • Place the input and output capacitors as close to the pins of the device as possible; • The device is connected by copper plane and the heat sink (or back pad) of the device is fully welded with | 12 |
## CAD (KiCad official)
- Symbol: `CJ6336-M3N-5.0`
- Footprint: `Package_TO_SOT_SMD:SOT-23-3`
- 3D model: SOT-23-3L (KiCad packages3D, STEP)
- 3D model files: `cj6336-m3n-5-0-etched.step` / `cj6336-m3n-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cj6336-m3n-5-0.step` / `cj6336-m3n-5-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Changjing datasheet](docs/cj6336-m3n-5-0-datasheet.pdf) (18 pp, sha256 `8a039caed9d7eb5b`, retrieved 2026-10-22, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/cj6336-m3n-5-0-datasheet.pdf)