component
CI5930-50A
Public Made by Adomby adom
Tokmas Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| ci5930-50a-etched.glb | 7d ago |
| ci5930-50a-etched.step | 7d ago |
| ci5930-50a-hero.glb | 7d ago |
| ci5930-50a-hero.overlay.json | 7d ago |
| ci5930-50a.glb | 7d ago |
| ci5930-50a.kicad_mod | 7d ago |
| ci5930-50a.kicad_sym | 7d ago |
| ci5930-50a.lbr | 7d ago |
| ci5930-50a.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
CI5930-50A
Tokmas · Current Sensors · SOP-8
CI5930-50A from Tokmas, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Current sampled positive terminal of the primary conductor; input current flowing from IP+ to IP- is defined as positive, and the input voltage at IP+ is limited to ±600 VPK relative to GND (pin 5). |
| 2 | IP+ | passive | Second current sampled positive terminal, internally tied to pin 1 as the primary conductor's positive end; input current is limited to ±50 A (DC/AC RMS) and 40 A continuous per the absolute maximum ratings. |
| 3 | IP- | passive | Current sampled negative terminal of the primary conductor; the input voltage at IP- is limited to ±600 VPK relative to GND (pin 5), and the isolation between pins 1-4 and 5-8 is 3500 VRMS. |
| 4 | IP- | passive | Second current sampled negative terminal, internally tied to pin 3 as the primary conductor's negative end; the primary conductor resistance is typically 0.9 mΩ at IP = 2 A. |
| 5 | GND | power_in | Ground reference; the IP+ and IP- input voltages are specified relative to this pin. |
| 6 | VZCR | output | Zero current reference signal output with an internal benchmark of 2.470 V to 2.530 V at VCC = 5 V, whose source current is limited to 400 µA maximum and sink current to 3000 µA maximum. |
| 7 | OUT | output | Analog voltage output that sits at VCC/2 at zero current and moves with the input current; it is rated for a source current of 6 mA maximum and a sink current of 30 mA maximum, with a load of at most 1 nF capacitive and at least 1.5 kΩ resistive. |
| 8 | VCC | power_in | Single power supply input rated 4.5 V to 5.5 V (absolute maximum 7 V), drawing 20 mA typical and 25 mA maximum with OUT floated. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Tokmas |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply | VCC | 7 | V | 3 | |||
| Output Voltage | VOUT | -0.3 | V | Printed range -0.3~VCC+0.3 V; upper limit is VCC+0.3, not a number | 3 | ||
| Output Source Current | IOUT(SOURCE) | 6 | mA | 3 | |||
| Output Sink Current | IOUT(SINK) | 30 | mA | 3 | |||
| Input current peak current | IPEAK | 100 | A | 3 s | 3 | ||
| Input current continuous current | ICON | 40 | A | 3 | |||
| Isolation Voltage | VISO | 3500 | VAC | 3 | |||
| Operating Ambient Temperature | Ta | -40 | 125 | °C | 3 | ||
| Junction Temperature | TJ | 165 | °C | 3 | |||
| Storage Temperature | TS | -55 | 150 | °C | 3 | ||
| Electrostatic Discharge Voltage (HBM) | ESD(HBM) | 4000 | V | 3 | |||
| Withstand isolation voltage | VISO | 3500 | VRMS | Test method: 50 / 60Hz, 1min | 3 | ||
| Working voltage of basic insulation (peak) | VWFSI | 600 | VPK | Basic insulation, UL standard 62368-1:2014 | 3 | ||
| Working voltage of basic insulation (RMS) | VWFSI | 424 | VRMS | Basic insulation, UL standard 62368-1:2014 | 3 | ||
| Clearance | Dcl | 3.8 | mm | minimum distance through air from IP leads to signal leads | 3 | ||
| Maximum repetitive peak isolation voltage | VIORM | 600 | VPK | AC voltage (bipolar) | 4 | ||
| Maximum working isolation voltage (AC) | VIOWM | 424 | VRMS | AC voltage (sine wave) | 4 | ||
| Maximum working isolation voltage (DC) | VIOWM | 600 | VDC | DC voltage | 4 | ||
| Maximum transient isolation voltage (qualification) | VIOTM | 4949 | VPK | Test method: t = 60s (qualification) | 4 | ||
| Maximum transient isolation voltage (production) | VIOTM | 5515 | VPK | VTEST t = 1s (100% production) | 4 | ||
| Maximum surge isolation voltage | VIOSM | 7000 | VPK | Tested 1.2us (rise) / 50us (width), one time | 4 | ||
| Surge Current | ISURGE | 7.5 | kA | Tested in compliance to IEC 61000-4-5, 8µs (rise) / 20µs (width) | 4 | ||
| Input voltage | VIN+, VIN- | -600 | 600 | VPK | Voltage of IP+ and IP- relative to pin 5 (GND) | 4 | |
| Input current (DC / AC RMS) | IP | -50 | 50 | A | Decrease due to higher ambient temperature | 4 | |
| Power Supply | VCC | 4.5 | 5.5 | V | 4 | ||
| Operation Temperature | TA | -40 | 125 | °C | 4 | ||
| Power Supply | VCC | 4.5 | 5.5 | V | 4 | ||
| Supply Current | ICC | 20 | 25 | mA | OUT pin floated | 4 | |
| Internal benchmark | VZCR | 2.47 | 2.5 | 2.53 | V | 4 | |
| Zero Current Output Voltage | VOUT(Q) | 2.49 | 2.5 | 2.51 | V | IP=0 | 4 |
| Output Capacitance Load | CL | 1 | nF | 4 | |||
| Output Resistive Load | RL | 1.5 | kΩ | 4 | |||
| Res. of Primary Conductor | RP | 0.9 | 1.2 | mΩ | IP=2A | 4 | |
| Propagation Time | tD | 1 | 2 | μs | 4 | ||
| Rise Time | tr | 1 | 2.2 | μs | 4 | ||
| Common Mode Rejection Ratio | CMRR | 38 | dB | 4 | |||
| Bandwidth | BW | 250 | kHz | -3dB | 4 | ||
| Reference Output Source Current | IZCR(SOURCE) | 400 | μA | 4 | |||
| Reference Output Sink Current | IZCR(SINK) | 3000 | μA | 4 | |||
| Nonlinearity | LinERR | 0.1 | 0.5 | % | 4 | ||
| Symmetry | SymERR | 0.5 | 1.5 | % | 4 | ||
| Current Accuracy Range (50A) | IP | -50 | 50 | A | 6 | ||
| Sensitivity (50A) | Sens | 38.8 | 40 | 41.2 | mV/A | full range of IP | 6 |
| Zero Current Differential Output Error (50A) | VOE | -10 | 10 | mV | 6 | ||
| Total Output Error (50A) | ETOT | -3 | 3 | % | 6 | ||
| Power-on Time | TPOR | 10 | μs | Output rising from 0 to 90% of steady-state | 4 | ||
| Noise (50A) | VNOISE(P-P) | 25 | mV | 6 | |||
| Zero Current Output Slope (50A) | ΔVOUT(Q) | 0.17 | mV/℃ | 6 | |||
| Sensitivity Slope (50A) | ΔSENS | 0.01 | mV/A /℃ | 6 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | The typical resistance of the primary current input conductor at 25 ° C is 0.9 mΩ. The lead frame is made of copper. The temperature | 9 |
CAD (KiCad official)
- Symbol:
CI5930-50A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ci5930-50a-etched.step/ci5930-50a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ci5930-50a.step/ci5930-50a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Tokmas datasheet (20 pp, sha256
03b4209f2e069dcf, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).