CH340C

{
 "schema": "adom.pads/1",
 "slug": "ch340c",
 "footprint": "SOIC-16_3.9x9.9mm_P1.27mm",
 "generated_from": {
  "footprint": "SOIC-16_3.9x9.9mm_P1.27mm@sha256:f9b5075740f7816c",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.475,
   -4.445
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "SOIC-16_3.9x9.9mm_P1.27mm@sha256:f9b5075740f7816c"
 },
 "pad_count": 16,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "16",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "GND",
   "type": "power_in",
   "description": "Common ground reference. Connect directly to the USB bus ground.",
   "is_pin1": true,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "TXD",
   "type": "output",
   "description": "Serial data output (UART TX). Idles high on CH340C.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "RXD",
   "type": "input",
   "description": "Serial data input (UART RX) with internal software-controllable pull-up and pull-down.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "V3",
   "type": "power_in",
   "description": "Internal 3.3 V regulator node. In 5 V operation, connect a 0.1 uF decoupling capacitor to GND. In 3.3 V operation, tie V3 to VCC and to the external 3.3 V supply.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "UD+",
   "type": "bidirectional",
   "description": "USB D+ data line. Connect directly to the USB bus D+; do not add a series resistor (internal USB pull-up and transceiver are integrated).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "UD-",
   "type": "bidirectional",
   "description": "USB D- data line. Connect directly to the USB bus D-; do not add a series resistor.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "NC",
   "type": "unconnected",
   "description": "No connect on CH340C. Must be left floating.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.475,
    4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "OUT#/DTR#",
   "type": "output",
   "description": "MODEM general-purpose output signal (software defined, active low). On CH340C batches whose lot code starts with 4 and whose last three digits are greater than B40, adding a 4.7 kΩ pull-down converts this pin to a second DTR#.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "CTS#",
   "type": "input",
   "description": "MODEM Clear-To-Send handshake input, active low (or high when auxiliary RS-232 mode is enabled).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "DSR#",
   "type": "input",
   "description": "MODEM Data Set Ready handshake input, active low (or high in auxiliary RS-232 mode).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "RI#",
   "type": "input",
   "description": "MODEM Ring Indicator input, active low (or high in auxiliary RS-232 mode).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "DCD#",
   "type": "input",
   "description": "MODEM Data Carrier Detect input, active low (or high in auxiliary RS-232 mode).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -0.635
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "DTR#",
   "type": "output",
   "description": "MODEM Data Terminal Ready output, active low (or high in auxiliary RS-232 mode). Used for MCU DTR#-default-high one-key download flows.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -1.905
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "RTS#",
   "type": "output",
   "description": "MODEM Request To Send output, active low (or high in auxiliary RS-232 mode).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -3.175
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "15",
   "name": "R232",
   "type": "input",
   "description": "Auxiliary RS-232 enable input, active high, with internal pull-down. When high, an inverter is inserted on RXD and the MODEM signal polarities invert. Sampled only once at power-on reset.",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "16",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.475,
    -4.445
   ],
   "rot": 0.0,
   "size": [
    1.95,
    0.6
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "16",
   "name": "VCC",
   "type": "power_in",
   "description": "Positive supply input. Requires a 0.1 uF decoupling capacitor to GND. Accepts 5 V (4.0-5.3 V) or 3.3 V (3.1-3.6 V, with V3 tied to VCC).",
   "is_pin1": false,
   "source": {
    "geometry": "SOIC-16_3.9x9.9mm_P1.27mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}