component
CFR-50JB-52-1K5
Public Made by Adomby adom
YAGEO Through Hole Resistors, 插件,D3.3xL9mm. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownCFR-50JB-52-1K5
YAGEO · Through Hole Resistors · R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal
CFR-50JB-52-1K5 from YAGEO, in a R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | YAGEO |
| Package | R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resistance range minimum | R | 1 | Ω | For E24 series values | 3 | ||
| Resistance range maximum | R | 10 | MΩ | For E24 series values | 3 | ||
| Resistance tolerance (J = ±5%) | -5 | 5 | % | MPN tolerance letter J | 2 | ||
| Temperature coefficient of resistance | TCR | -500 | 350 | ppm/°C | CFR-50, resistance under 100KΩ (Table 2) | 4 | |
| Maximum working voltage | 350 | V | CFR-50 column | 3 | |||
| Maximum overload voltage | 700 | V | CFR-50 column | 3 | |||
| Operating temperature range minimum | -55 | °C | Operating Temp. Range | 3 | |||
| Operating temperature range maximum | 155 | °C | Operating Temp. Range | 3 | |||
| Short time overload resistance change | ΔR | -0.75 | 0.75 | % | 2.5 times RCWV for 5 sec (not more than maximum overload voltage); plus ±0.05Ω absolute term as printed | 4 | |
| Periodic-pulse overload resistance change | ΔR | -1 | 1 | % | 4 times RCWV (or Umax., whichever less), 10,000 cycles (1 Sec. on, 25 Sec. off); plus ±0.05Ω absolute term as printed | 4 | |
| Damp heat steady state resistance change | ΔR | -3 | 3 | % | 40±2°C, 90-95% RH for 56 days, loaded with 0.1 times RCWV (or Umax., whichever less); plus ±0.05Ω absolute term as printed | 4 | |
| Endurance at 70°C resistance change | ΔR | -3 | 3 | % | 70±2°C at RCWV (or Umax., whichever less) for 1,000 Hr. (1.5 Hr on, 0.5 Hr off); plus ±0.05Ω absolute term as printed | 4 | |
| Temperature cycling resistance change | ΔR | -1 | 1 | % | -55°C to Room Temp. to +155°C to Room Temp. (5 cycles); plus ±0.05Ω absolute term as printed | 4 | |
| Resistance to soldering heat resistance change | ΔR | -1 | 1 | % | 260±3°C for 10±1 Sec., immersed to 3±0.5mm from body; plus ±0.05Ω absolute term as printed | 4 | |
| Insulation resistance | 1000 | MΩ | In V-Block for 60 sec. | 4 | |||
| Solderability coverage | 95 | % | 245±5°C for 3±0.5 Sec.; minimum coverage | 4 | |||
| Robustness of terminations load | 2.5 | Kg | Direct load for 10 Sec. in direction of terminal leads (24.5N as printed) | 4 |
CAD (KiCad official)
- Symbol:
CFR-50JB-52-1K5 - Footprint:
Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal - 3D model: R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal (KiCad packages3D, STEP)
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: YAGEO datasheet (16 pp, sha256
76319a6451937e77, retrieved 2026-11-06, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).