# CE1C106M2S2NTA0VRJ0

**Dersonic** · Aluminum Electrolytic Capacitors - SMD · CP_Elec_4x5.4

CE1C106M2S2NTA0VRJ0 from Dersonic, in a CP_Elec_4x5.4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | + | passive | Positive terminal (pad 1 of the CP_ footprint; symbol and 3D mark the + end). |
| 2 | - | passive | Negative terminal. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Dersonic |
| Package | CP_Elec_4x5.4 |
| Category | Capacitors |
| Pins | 2 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature range |  | -55 |  | 105 | ℃ |  | 3 |
| Capacitance tolerance |  | -20 |  | 20 | % | 120 Hz, +20℃ | 3 |
| Loss tangent (Tan δ) max, 16 V | Tan |  |  | 0.2 |  | 120 Hz, +20℃, rated voltage 16 V | 3 |
| Impedance ratio Z-25C/Z+20C max, 16 V | Z-25C/Z+20C |  |  | 2 |  | Rated voltage 16 V; 120 Hz | 3 |
| Impedance ratio Z-40C/Z+20C max, 16 V | Z-40C/Z+20C |  |  | 6 |  | Rated voltage 16 V; 120 Hz | 3 |
| Capacitance change at Step 4 (105℃) vs Step 1 value | ΔC/C | -25 |  | 25 | % | Step 4, 105℃, relative to Step 1 value | 3 |
| Capacitance change at Step 5 (20℃) vs Step 1 value | ΔC/C | -10 |  | 10 | % | Step 5, 20℃, relative to Step 1 value | 3 |
| Leakage current | LC |  |  | 3 | uA | After 2 minutes; I ≤ 0.01CV or 3 uA, whichever is greater | 3 |
| Allowable ripple current, rated 16 V 10 uF 4*5.4 |  |  |  | 17 | mA rms | 105℃, 120 Hz | 2 |
| Rated voltage (code 1C) |  |  |  | 16 | V | Rated voltage of this MPN (1C = 16 V) | 2 |
| Surge voltage, 16 V rating |  |  |  | 18.4 | V | 1000 cycles of 30 s charge / 5.5 min discharge, 15-35℃ | 4 |
| Vibration capacitance change | ΔC/C | -5 |  | 5 | % | 10-55 Hz, 1.5 mm p-p, 2 h in each of X, Y, Z | 4 |
| Solder heat resistance capacitance change | ΔC/C | -10 |  | 10 | % | After reflow soldering; restored at room temperature | 4 |
| High temperature load life capacitance change | ΔC/C | -30 |  | 30 | % | 105℃, rated voltage, 2000 h | 4 |
| High temperature load life loss tangent | Tan |  |  | 300 | % | 105℃, rated voltage, 2000 h; of initial specified value | 4 |
| High temperature storage capacitance change | ΔC/C | -30 |  | 30 | % | 105℃, 1000 h storage | 4 |
| High temperature storage loss tangent | Tan |  |  | 300 | % | 105℃, 1000 h storage; of initial specified value | 4 |
| High temperature storage leakage current | LC |  |  | 200 | % | 105℃, 1000 h storage; of initial specified value | 4 |
| Humidity capacitance change | ΔC/C | -15 |  | 15 | % | 40℃, 90-95 % RH, 240 h | 4 |
| Humidity loss tangent | DF |  |  | 100 | % | 40℃, 90-95 % RH, 240 h; of initial specified value | 4 |
| Humidity leakage current | LC |  |  | 100 | % | 40℃, 90-95 % RH, 240 h; of initial specified value | 4 |
| Reflow peak temperature (top of capacitor) | Tp |  |  | 260 | ℃ | Size 4~6.3, thickness 2.5 mm | 8 |
| Preheat time 150℃ to 200℃ | t1 |  |  | 120 | s | Size 4~6.3, thickness 2.5 mm | 8 |
| Time at 217℃ on capacitor top | t2 |  |  | 90 | s | Size 4~6.3, thickness 2.5 mm | 8 |
| Time within 5℃ of actual peak temperature | t3 |  |  | 5 | s | Size 4~6.3, thickness 2.5 mm | 8 |
| Average ramp-up rate |  |  |  | 3 | ℃/s | Reflow profile footnote | 8 |
| Ramp-down rate |  |  |  | 6 | ℃/s | Reflow profile footnote | 8 |
| Time from 25℃ to peak temperature |  |  |  | 8 | min | Reflow profile footnote | 8 |
| Storage temperature |  | 5 |  | 35 | ℃ | Storage, indoors | 14 |
| Storage relative humidity |  |  |  | 75 | % | Storage; RH lower than 75 % | 14 |
| Nominal capacitance | Cap. |  | 10 |  | uF | Code 106 = 10 uF; 16 V product table row | 2 |

## Materials and finish

As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).

| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | 尼龙 |  | 2 座板 Base 热可塑性尼龙（Polyphthalamide 纯度 purity40~70％） | 9 |
| contacts |  | tin | 3 +引出线 Lead Wire 铝线(AL)、CP 线(Fe、Cu、Sn)（扁平形加工 flat） 4 -引出线 Lead Wire 铝线(AL)、CP 线(Fe、Cu、Sn)（扁平形加工 flat） | 9 |

## CAD (KiCad official)

- Symbol: `CE1C106M2S2NTA0VRJ0`
- Footprint: `Capacitor_SMD:CP_Elec_4x5.4`
- 3D model: CP_Elec_4x5.4 (KiCad packages3D, STEP)
- 3D model files: `ce1c106m2s2nta0vrj0-etched.step` / `ce1c106m2s2nta0vrj0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ce1c106m2s2nta0vrj0.step` / `ce1c106m2s2nta0vrj0.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Dersonic datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603106682885193728) (14 pp, sha256 `5126f00afbc775a3`, retrieved 2026-11-06, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins`, primary `two-terminal convention` (convention), consensus `off` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/ce1c106m2s2nta0vrj0-datasheet.pdf)