component
CDCE6214TWRGERQ1
Public Made by Adomby adom
Texas Instruments Clock Generators, PLLs, Frequency Synthesizers, QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
cdce6214twrgerq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+91−11
package.json+49−9@@ -65,13 +65,13 @@ "number": "3", "name": "VDD_REF", "type": "power_in",- "description": "Power supply (1.8V, 2.5V, or 3.3V \u00b15%) for reference input circuits, digital core, and I2C pull-up resistors."+ "description": "Power supply (1.8V, 2.5V, or 3.3V ±5%) for reference input circuits, digital core, and I2C pull-up resistors." }, { "number": "4", "name": "REFSEL", "type": "input",- "description": "Reference input selection control pin (three-state) with 50k\u03a9 pull-up and 50k\u03a9 pull-down resistors for selecting primary or secondary reference source."+ "description": "Reference input selection control pin (three-state) with 50kΩ pull-up and 50kΩ pull-down resistors for selecting primary or secondary reference source." }, { "number": "5",@@ -95,7 +95,7 @@ "number": "8", "name": "PDN", "type": "input",- "description": "Power-down/reset input (active low) or synchronization signal input (SYNCN) with 50k\u03a9 pull-up resistor (disabled in output mode)."+ "description": "Power-down/reset input (active low) or synchronization signal input (SYNCN) with 50kΩ pull-up resistor (disabled in output mode)." }, { "number": "9",@@ -137,13 +137,13 @@ "number": "15", "name": "VDDO_34", "type": "power_in",- "description": "Power supply (1.8V, 2.5V, or 3.3V \u00b15%) for OUT0, OUT3, and OUT4 output channels with independent voltage configuration."+ "description": "Power supply (1.8V, 2.5V, or 3.3V ±5%) for OUT0, OUT3, and OUT4 output channels with independent voltage configuration." }, { "number": "16", "name": "VDDO_12", "type": "power_in",- "description": "Power supply (1.8V, 2.5V, or 3.3V \u00b15%) for OUT1 and OUT2 output channels with independent voltage configuration."+ "description": "Power supply (1.8V, 2.5V, or 3.3V ±5%) for OUT1 and OUT2 output channels with independent voltage configuration." }, { "number": "17",@@ -185,13 +185,13 @@ "number": "23", "name": "HW_SW_CTRL", "type": "input",- "description": "EEPROM page selection control pin (three-state) with 50k\u03a9 pull-up and 50k\u03a9 pull-down resistors for selecting factory or user-programmed configuration page."+ "description": "EEPROM page selection control pin (three-state) with 50kΩ pull-up and 50kΩ pull-down resistors for selecting factory or user-programmed configuration page." }, { "number": "24", "name": "VDD_VCO", "type": "power_in",- "description": "Power supply (1.8V, 2.5V, or 3.3V \u00b15%) for PLL, VCO, and charge pump circuits."+ "description": "Power supply (1.8V, 2.5V, or 3.3V ±5%) for PLL, VCO, and charge pump circuits." }, { "number": "25",@@ -235,6 +235,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "cdce6214twrgerq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "cdce6214twrgerq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "8305a72bbe18ccde928a23b070e1cbc4af2976cfaa67d6fdce6c94cfd21d73bc",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -220,7 +220,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "cdce6214twrgerq1.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "cdce6214twrgerq1-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 4.0,+ 4.0,+ 0.77+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "8305a72bbe18ccde928a23b070e1cbc4af2976cfaa67d6fdce6c94cfd21d73bc",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -268,4 +308,4 @@ "public": true }, "updated_at": "2026-09-24T18:58:17.737Z"-}+}