component
CDCE6214TWRGERQ1
Public Made by Adomby adom
Texas Instruments Clock Generators, PLLs, Frequency Synthesizers, QFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+11−8@@ -50,13 +50,13 @@ "number": "3", "name": "VDD_REF", "type": "power_in",- "description": "Power supply (1.8V, 2.5V, or 3.3V \u00b15%) for reference input circuits, digital core, and I2C pull-up resistors."+ "description": "Power supply (1.8V, 2.5V, or 3.3V ±5%) for reference input circuits, digital core, and I2C pull-up resistors." }, { "number": "4", "name": "REFSEL", "type": "input",- "description": "Reference input selection control pin (three-state) with 50k\u03a9 pull-up and 50k\u03a9 pull-down resistors for selecting primary or secondary reference source."+ "description": "Reference input selection control pin (three-state) with 50kΩ pull-up and 50kΩ pull-down resistors for selecting primary or secondary reference source." }, { "number": "5",@@ -80,7 +80,7 @@ "number": "8", "name": "PDN", "type": "input",- "description": "Power-down/reset input (active low) or synchronization signal input (SYNCN) with 50k\u03a9 pull-up resistor (disabled in output mode)."+ "description": "Power-down/reset input (active low) or synchronization signal input (SYNCN) with 50kΩ pull-up resistor (disabled in output mode)." }, { "number": "9",@@ -122,13 +122,13 @@ "number": "15", "name": "VDDO_34", "type": "power_in",- "description": "Power supply (1.8V, 2.5V, or 3.3V \u00b15%) for OUT0, OUT3, and OUT4 output channels with independent voltage configuration."+ "description": "Power supply (1.8V, 2.5V, or 3.3V ±5%) for OUT0, OUT3, and OUT4 output channels with independent voltage configuration." }, { "number": "16", "name": "VDDO_12", "type": "power_in",- "description": "Power supply (1.8V, 2.5V, or 3.3V \u00b15%) for OUT1 and OUT2 output channels with independent voltage configuration."+ "description": "Power supply (1.8V, 2.5V, or 3.3V ±5%) for OUT1 and OUT2 output channels with independent voltage configuration." }, { "number": "17",@@ -170,13 +170,13 @@ "number": "23", "name": "HW_SW_CTRL", "type": "input",- "description": "EEPROM page selection control pin (three-state) with 50k\u03a9 pull-up and 50k\u03a9 pull-down resistors for selecting factory or user-programmed configuration page."+ "description": "EEPROM page selection control pin (three-state) with 50kΩ pull-up and 50kΩ pull-down resistors for selecting factory or user-programmed configuration page." }, { "number": "24", "name": "VDD_VCO", "type": "power_in",- "description": "Power supply (1.8V, 2.5V, or 3.3V \u00b15%) for PLL, VCO, and charge pump circuits."+ "description": "Power supply (1.8V, 2.5V, or 3.3V ±5%) for PLL, VCO, and charge pump circuits." }, { "number": "25",@@ -263,5 +263,8 @@ "docs/cdce6214twrgerq1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }