main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs cd74hct4051m96: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers cd74hct4051m96: viewers · Ray
cd74hct4051m96-etched.fit.json cd74hct4051m96: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
cd74hct4051m96-etched.glb cd74hct4051m96: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
cd74hct4051m96-etched.step cd74hct4051m96: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
cd74hct4051m96.glb Publish 0.1.0 · Ray
cd74hct4051m96.kicad_mod Publish 0.1.0 · Ray
cd74hct4051m96.kicad_sym Publish 0.1.0 · Ray
cd74hct4051m96.lbr Publish 0.1.0 · Ray
cd74hct4051m96.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json cd74hct4051m96: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md cd74hct4051m96: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

CD74HCT4051M96

Texas Instruments · Analog Switches, Multiplexers · SOP-16

CD74HCT4051M96 from Texas Instruments, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A4 bidirectional Analog channel 4 in/out. Bidirectional analog switch terminal, connected to the COM pin when S2:S0 = 100 and Enable is asserted low.
2 A6 bidirectional Analog channel 6 in/out. Bidirectional analog switch terminal, connected to the COM pin when S2:S0 = 110 and Enable is asserted low.
3 COM bidirectional Common analog out/in. Shared switch terminal that connects to one of the eight A0-A7 channels selected by S0-S2. Analog switch is bidirectional so this pin can act as input or output.
4 A7 bidirectional Analog channel 7 in/out. Bidirectional analog switch terminal, connected to the COM pin when S2:S0 = 111 and Enable is asserted low.
5 A5 bidirectional Analog channel 5 in/out. Bidirectional analog switch terminal, connected to the COM pin when S2:S0 = 101 and Enable is asserted low.
6 ~{E} input Active-low enable input. When high, all eight analog switches are disabled (open); when low, the channel selected by S0-S2 is connected to COM. HCT logic thresholds: VIL = 0.8 V max, VIH = 2 V min.
7 VEE power_in Negative analog supply. Establishes the lower limit of the analog switch voltage range; VCC-VEE may be up to 10 V for HCT devices. Tie to GND for single-supply operation.
8 GND power_in Digital ground reference for logic inputs (S0-S2, E) and for the internal level-conversion circuitry.
9 S2 input Channel select bit 2 (MSB) of the 3-bit binary address selecting one of eight channels A0-A7. HCT-level input: VIL = 0.8 V max, VIH = 2 V min.
10 S1 input Channel select bit 1 of the 3-bit binary address selecting one of eight channels A0-A7. HCT-level input: VIL = 0.8 V max, VIH = 2 V min.
11 S0 input Channel select bit 0 (LSB) of the 3-bit binary address selecting one of eight channels A0-A7. HCT-level input: VIL = 0.8 V max, VIH = 2 V min.
12 A3 bidirectional Analog channel 3 in/out. Bidirectional analog switch terminal, connected to the COM pin when S2:S0 = 011 and Enable is asserted low.
13 A0 bidirectional Analog channel 0 in/out. Bidirectional analog switch terminal, connected to the COM pin when S2:S0 = 000 and Enable is asserted low.
14 A1 bidirectional Analog channel 1 in/out. Bidirectional analog switch terminal, connected to the COM pin when S2:S0 = 001 and Enable is asserted low.
15 A2 bidirectional Analog channel 2 in/out. Bidirectional analog switch terminal, connected to the COM pin when S2:S0 = 010 and Enable is asserted low.
16 VCC power_in Positive digital/analog supply, 4.5 V to 5.5 V for HCT variants. Sets the upper limit of the switch voltage range; VCC-VEE up to 10 V permitted.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOP-16
Category Interface
Pins 16

Ordering variants

  • CD74HCT4051M96M
  • CD74HCT4051M96
  • CD74HCT4051M96MT
  • CD74HCT4051M96E
  • CD74HCT4051M96EE4
  • CD74HCT4051M96F
  • CD74HCT4051M96F3A
  • CD74HCT4051M96NS
  • CD74HCT4051M96NSR
  • CD74HCT4051M96PW
  • CD74HCT4051M96PWR
  • CD74HCT4051M96PWT

CAD (KiCad official)

  • Symbol: CD74HCT4051M96
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOP-16 (KiCad packages3D, STEP)
  • 3D model files: cd74hct4051m96-etched.step / cd74hct4051m96-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); cd74hct4051m96.step / cd74hct4051m96.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 1c48a344f029b942, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF