← Commit history

Initial commit: component/cd4536bdwr

Ray ·3a1ea0eda4 ·
2 files changed +242
README.mdadded+52
@@ -0,0 +1,52 @@+# CD4536BDWR++**Texas Instruments** · Timers / Counters · SOIC-16-300mil++CD4536BDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SET | input | Active-high synchronous set input; resets all 24 counter flip-flops to logic 1 on the next clock edge to initiate a new timing cycle. |+| 2 | RESET | input | Active-high asynchronous reset input; clears all counter flip-flops to logic 0 and holds the counter in reset while HIGH. |+| 3 | IN1 | input | On-chip RC oscillator input terminal; external RS (≈5-10× RT) connects between OUT2 and this pin; oscillator frequency f ≈ 1/(3RT·CT). |+| 4 | OUT1 | output | RC oscillator output terminal 1; provides the buffered oscillator clock signal to the programmable counter stages. |+| 5 | OUT2 | output | RC oscillator output terminal 2; external RT-CT timing network connects here to set the oscillator frequency. |+| 6 | 8-BYPASS | input | Active-high bypass input; when HIGH, bypasses the first 8 counter stages so only stages 9-24 are active (see Decode Out Selection Table). |+| 7 | CLOCK_INH | input | Active-high clock inhibit input; when HIGH, prevents the clock from advancing the counter. |+| 8 | VSS | power_in | Negative supply rail (ground reference); VSS = 0 V. |+| 9 | A | input | BCD decode-output-select bit A (LSB); with B, C, D forms a 4-bit code selecting one of 16 counter-stage outputs to drive DECODE OUT. |+| 10 | B | input | BCD decode-output-select bit B; combined with A, C, D to program the count at which DECODE OUT goes HIGH. |+| 11 | C | input | BCD decode-output-select bit C; combined with A, B, D to program the count at which DECODE OUT goes HIGH. |+| 12 | D | input | BCD decode-output-select bit D (MSB); with A, B, C selects one of 16 programmable count stages for the DECODE OUT terminal. |+| 13 | MONO_IN | input | Monostable input; an external resistor (VDD to this pin) and capacitor (this pin to VSS) set the DECODE OUT pulse width in monostable mode. |+| 14 | OSC_INH | input | Active-high oscillator inhibit input; when HIGH, disables the on-chip RC oscillator. |+| 15 | DECODE_OUT | output | Programmable active-high decode output; goes HIGH when the counter reaches the stage selected by A-D; pulse width is set by the MONO_IN RC network in monostable mode. |+| 16 | VDD | power_in | Positive supply voltage; recommended operating range 3 V to 18 V (absolute maximum 20 V); quiescent device current max 20 µA at VDD = 18 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-16-300mil |+| Category | Clock/Timing |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `CD4536BDWR`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)+- 3D model files: `cd4536bdwr-etched.step` / `cd4536bdwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cd4536bdwr.step` / `cd4536bdwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/cd4536b) (26 pp, sha256 `bbfd5603d8d971d6`, retrieved 2026-09-29, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cd4536bdwr-datasheet.pdf)
page.jsonadded+190
@@ -0,0 +1,190 @@+{+  "slug": "cd4536bdwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Timers / Counters, SOIC-16-300mil. Pinout reviewed by a person against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "clock-timing",+    "cd4536bdwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "cd4536bdwr.kicad_sym",+    "cd4536bdwr.kicad_mod",+    "cd4536bdwr.glb",+    "cd4536bdwr.step",+    "cd4536bdwr.lbr",+    "docs/hero.png",+    "docs/cd4536bdwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "CD4536BDWR",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-16-300mil",+    "pin_count": 16,+    "category": "Clock/Timing",+    "subcategory": "Timers / Counters",+    "datasheet": "https://www.ti.com/cn/lit/gpn/cd4536b",+    "parts": {+      "symbol": "cd4536bdwr.kicad_sym",+      "footprint": "cd4536bdwr.kicad_mod",+      "model_3d": "cd4536bdwr-etched.glb",+      "model_3d_plain": "cd4536bdwr.glb",+      "model_3d_step": "cd4536bdwr-etched.step",+      "model_3d_step_plain": "cd4536bdwr.step",+      "lbr": "cd4536bdwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2861404",+      "digikey": "296-31536-2-ND",+      "mouser": "595-CD4536BDWR"+    },+    "distributor_check": {+      "checked_at": "2026-09-29T16:13:02Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-31536-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-CD4536BDWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "SET",+        "type": "input",+        "description": "Active-high synchronous set input; resets all 24 counter flip-flops to logic 1 on the next clock edge to initiate a new timing cycle."+      },+      {+        "number": "2",+        "name": "RESET",+        "type": "input",+        "description": "Active-high asynchronous reset input; clears all counter flip-flops to logic 0 and holds the counter in reset while HIGH."+      },+      {+        "number": "3",+        "name": "IN1",+        "type": "input",+        "description": "On-chip RC oscillator input terminal; external RS (≈5-10× RT) connects between OUT2 and this pin; oscillator frequency f ≈ 1/(3RT·CT)."+      },+      {+        "number": "4",+        "name": "OUT1",+        "type": "output",+        "description": "RC oscillator output terminal 1; provides the buffered oscillator clock signal to the programmable counter stages."+      },+      {+        "number": "5",+        "name": "OUT2",+        "type": "output",+        "description": "RC oscillator output terminal 2; external RT-CT timing network connects here to set the oscillator frequency."+      },+      {+        "number": "6",+        "name": "8-BYPASS",+        "type": "input",+        "description": "Active-high bypass input; when HIGH, bypasses the first 8 counter stages so only stages 9-24 are active (see Decode Out Selection Table)."+      },+      {+        "number": "7",+        "name": "CLOCK_INH",+        "type": "input",+        "description": "Active-high clock inhibit input; when HIGH, prevents the clock from advancing the counter."+      },+      {+        "number": "8",+        "name": "VSS",+        "type": "power_in",+        "description": "Negative supply rail (ground reference); VSS = 0 V."+      },+      {+        "number": "9",+        "name": "A",+        "type": "input",+        "description": "BCD decode-output-select bit A (LSB); with B, C, D forms a 4-bit code selecting one of 16 counter-stage outputs to drive DECODE OUT."+      },+      {+        "number": "10",+        "name": "B",+        "type": "input",+        "description": "BCD decode-output-select bit B; combined with A, C, D to program the count at which DECODE OUT goes HIGH."+      },+      {+        "number": "11",+        "name": "C",+        "type": "input",+        "description": "BCD decode-output-select bit C; combined with A, B, D to program the count at which DECODE OUT goes HIGH."+      },+      {+        "number": "12",+        "name": "D",+        "type": "input",+        "description": "BCD decode-output-select bit D (MSB); with A, B, C selects one of 16 programmable count stages for the DECODE OUT terminal."+      },+      {+        "number": "13",+        "name": "MONO_IN",+        "type": "input",+        "description": "Monostable input; an external resistor (VDD to this pin) and capacitor (this pin to VSS) set the DECODE OUT pulse width in monostable mode."+      },+      {+        "number": "14",+        "name": "OSC_INH",+        "type": "input",+        "description": "Active-high oscillator inhibit input; when HIGH, disables the on-chip RC oscillator."+      },+      {+        "number": "15",+        "name": "DECODE_OUT",+        "type": "output",+        "description": "Programmable active-high decode output; goes HIGH when the counter reaches the stage selected by A-D; pulse width is set by the MONO_IN RC network in monostable mode."+      },+      {+        "number": "16",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive supply voltage; recommended operating range 3 V to 18 V (absolute maximum 20 V); quiescent device current max 20 µA at VDD = 18 V."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/cd4536b",+        "pages": 26,+        "sha256": "bbfd5603d8d971d6",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file