← Commit history

Initial commit: component/cd4532bpwr

Ray ·b3925cae61 ·
2 files changed +258
README.mdadded+52
@@ -0,0 +1,52 @@+# CD4532BPWR++**Texas Instruments** · Signal Switches, Multiplexers, Decoders · TSSOP-16++CD4532BPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | D4 | input | Priority input D4; D7 is highest priority and D0 lowest, with an input current of max ±1 µA at 18 V over the full temperature range. |+| 2 | D5 | input | Priority input D5, higher priority than D4 and lower than D6. |+| 3 | D6 | input | Priority input D6, higher priority than D5 and lower than D7. |+| 4 | D7 | input | Highest-priority input D7 of the 8-bit priority encoder. |+| 5 | EI | input | Chip-enable input; the encoder is inhibited when EI is low and encodes when EI is high. |+| 6 | Q2 | output | Binary code output bit 2 (MSB) of the highest-priority active input, valid when EI is high. |+| 7 | Q1 | output | Binary code output bit 1 of the highest-priority active input, valid when EI is high. |+| 8 | VSS | power_in | Ground (VSS) supply terminal; all voltages are referenced to it. |+| 9 | Q0 | output | Binary code output bit 0 (LSB) of the highest-priority active input, valid when EI is high. |+| 10 | D0 | input | Lowest-priority input D0 of the 8-bit priority encoder. |+| 11 | D1 | input | Priority input D1, higher priority than D0 and lower than D2. |+| 12 | D2 | input | Priority input D2, higher priority than D1 and lower than D3. |+| 13 | D3 | input | Priority input D3, higher priority than D2 and lower than D4. |+| 14 | GS | output | Group select output; goes high to indicate that priority inputs are present. |+| 15 | EO | output | Enable-out; high when no priority inputs are present, low if any input is high, disabling cascaded lower-order stages. |+| 16 | VDD | power_in | Positive supply voltage, recommended 3 V to 18 V, absolute maximum -0.5 V to +20 V referenced to VSS. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | TSSOP-16 |+| Category | Logic |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `CD4532BPWR`+- Footprint: `Package_SO:TSSOP-16_4.4x5mm_P0.65mm`+- 3D model: TSSOP-16 (KiCad packages3D, STEP)+- 3D model files: `cd4532bpwr-etched.step` / `cd4532bpwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `cd4532bpwr.step` / `cd4532bpwr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/cd4532b.pdf) (19 pp, sha256 `306ddfe208da62a3`, retrieved 2026-10-01, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/cd4532bpwr-datasheet.pdf)
page.jsonadded+206
@@ -0,0 +1,206 @@+{+  "slug": "cd4532bpwr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Signal Switches, Multiplexers, Decoders, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "logic",+    "cd4532bpwr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "cd4532bpwr.kicad_sym",+    "cd4532bpwr.kicad_mod",+    "cd4532bpwr.glb",+    "cd4532bpwr.step",+    "cd4532bpwr.lbr",+    "docs/hero.png",+    "docs/cd4532bpwr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "CD4532BPWR",+    "manufacturer": "Texas Instruments",+    "package": "TSSOP-16",+    "pin_count": 16,+    "category": "Logic",+    "subcategory": "Signal Switches, Multiplexers, Decoders",+    "datasheet": "https://www.ti.com/lit/ds/symlink/cd4532b.pdf",+    "parts": {+      "symbol": "cd4532bpwr.kicad_sym",+      "footprint": "cd4532bpwr.kicad_mod",+      "model_3d": "cd4532bpwr-etched.glb",+      "model_3d_plain": "cd4532bpwr.glb",+      "model_3d_step": "cd4532bpwr-etched.step",+      "model_3d_step_plain": "cd4532bpwr.step",+      "lbr": "cd4532bpwr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2682017",+      "digikey": "296-14161-2-ND",+      "mouser": "595-CD4532BPWR"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T15:59:27Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-14161-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-CD4532BPWR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "D4",+        "type": "input",+        "description": "Priority input D4; D7 is highest priority and D0 lowest, with an input current of max ±1 µA at 18 V over the full temperature range."+      },+      {+        "number": "2",+        "name": "D5",+        "type": "input",+        "description": "Priority input D5, higher priority than D4 and lower than D6."+      },+      {+        "number": "3",+        "name": "D6",+        "type": "input",+        "description": "Priority input D6, higher priority than D5 and lower than D7."+      },+      {+        "number": "4",+        "name": "D7",+        "type": "input",+        "description": "Highest-priority input D7 of the 8-bit priority encoder."+      },+      {+        "number": "5",+        "name": "EI",+        "type": "input",+        "description": "Chip-enable input; the encoder is inhibited when EI is low and encodes when EI is high."+      },+      {+        "number": "6",+        "name": "Q2",+        "type": "output",+        "description": "Binary code output bit 2 (MSB) of the highest-priority active input, valid when EI is high."+      },+      {+        "number": "7",+        "name": "Q1",+        "type": "output",+        "description": "Binary code output bit 1 of the highest-priority active input, valid when EI is high."+      },+      {+        "number": "8",+        "name": "VSS",+        "type": "power_in",+        "description": "Ground (VSS) supply terminal; all voltages are referenced to it."+      },+      {+        "number": "9",+        "name": "Q0",+        "type": "output",+        "description": "Binary code output bit 0 (LSB) of the highest-priority active input, valid when EI is high."+      },+      {+        "number": "10",+        "name": "D0",+        "type": "input",+        "description": "Lowest-priority input D0 of the 8-bit priority encoder."+      },+      {+        "number": "11",+        "name": "D1",+        "type": "input",+        "description": "Priority input D1, higher priority than D0 and lower than D2."+      },+      {+        "number": "12",+        "name": "D2",+        "type": "input",+        "description": "Priority input D2, higher priority than D1 and lower than D3."+      },+      {+        "number": "13",+        "name": "D3",+        "type": "input",+        "description": "Priority input D3, higher priority than D2 and lower than D4."+      },+      {+        "number": "14",+        "name": "GS",+        "type": "output",+        "description": "Group select output; goes high to indicate that priority inputs are present."+      },+      {+        "number": "15",+        "name": "EO",+        "type": "output",+        "description": "Enable-out; high when no priority inputs are present, low if any input is high, disabling cascaded lower-order stages."+      },+      {+        "number": "16",+        "name": "VDD",+        "type": "power_in",+        "description": "Positive supply voltage, recommended 3 V to 18 V, absolute maximum -0.5 V to +20 V referenced to VSS."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-sonnet-5-5",+        "primary_mode": "text+vision",+        "consensus_model": "claude-opus-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The terminal assignment on page 1 is a single top-view drawing for the 16-lead packages, not one spe; The pin names are read from a low-quality scan. Q2, Q1 and Q0 were each read as 'QO'-style labels in",+          "vision extraction: provenance cannot be text-verified; needs consensus"+        ],+        "pages_sent": 19,+        "cost_usd": 0.3219,+        "at": "2026-10-01T15:59:10"+      },+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/cd4532b.pdf",+        "pages": 19,+        "sha256": "306ddfe208da62a3",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file