CD4046BPWR

{
 "schema": "adom.pads/1",
 "slug": "cd4046bpwr",
 "footprint": "TSSOP-16_4.4x5mm_P0.65mm",
 "generated_from": {
  "footprint": "TSSOP-16_4.4x5mm_P0.65mm@sha256:fbac79fc5f310754",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   -2.8625,
   -2.275
  ],
  "corner": "top-left",
  "source": "silk-marker",
  "derived_from": "TSSOP-16_4.4x5mm_P0.65mm@sha256:fbac79fc5f310754"
 },
 "pad_count": 16,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "16",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "1",
   "name": "PHASE_PULSES",
   "type": "output",
   "description": "Phase pulses output. Goes high to indicate a locked condition when using phase comparator II. Useful for driving a lock indicator.",
   "is_pin1": true,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "2",
   "name": "PHASE_COMP_I_OUT",
   "type": "output",
   "description": "Phase Comparator I output. Exclusive-OR network output; requires a 50% duty cycle on the signal and comparator inputs to maximize lock range.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "3",
   "name": "COMPARATOR_IN",
   "type": "input",
   "description": "Comparator input for both phase comparators. Full CMOS logic swing available; can be direct-coupled from CMOS logic or AC-coupled for smaller signal swings.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "4",
   "name": "VCO_OUT",
   "type": "output",
   "description": "VCO output. Full CMOS logic swing at VDD; can drive CMOS frequency dividers (CD4018, CD4020, CD4022, CD4024, CD4029, CD4059).",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "5",
   "name": "INHIBIT",
   "type": "input",
   "description": "VCO and source-follower ON/OFF control. Logic 0 enables the VCO and source follower; logic 1 turns them off to minimize standby power (ultra-low standby).",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "6",
   "name": "C1_A",
   "type": "passive",
   "description": "VCO timing capacitor C1 terminal A. External capacitor C1 (>=50 pF at VDD>=10V, >=100pF at 5V) connected between pins 6 and 7 sets VCO frequency with R1/R2.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "7",
   "name": "C1_B",
   "type": "passive",
   "description": "VCO timing capacitor C1 terminal B. External capacitor C1 connected between pins 6 and 7 sets VCO frequency with R1/R2.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    -2.8625,
    2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "8",
   "name": "VSS",
   "type": "power_in",
   "description": "Negative supply / ground (0 V reference). Supply voltage range 3-18 V referenced from VDD (pin 16).",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "9",
   "name": "VCO_IN",
   "type": "input",
   "description": "VCO input (control voltage). High input impedance (~10^12 ohms). Typically driven from the low-pass filter output on the phase-comparator output.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "10",
   "name": "DEMODULATOR_OUT",
   "type": "output",
   "description": "Demodulator output (source follower). Provides the VCO input voltage buffered; when used, a load resistor Rs of 10k or more should be connected to VSS. Leave open when unused.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "11",
   "name": "R1",
   "type": "passive",
   "description": "VCO timing resistor R1 terminal (R1 to VSS). Sets VCO frequency range with C1; 5k <= R1 <= 1M recommended.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "12",
   "name": "R2",
   "type": "passive",
   "description": "VCO offset resistor R2 terminal (R2 to VSS). Optional; enables VCO frequency offset when present, R2 = infinity for no offset. 5k <= R2 <= 1M recommended.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.325
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "13",
   "name": "PHASE_COMP_II_OUT",
   "type": "tri_state",
   "description": "Phase Comparator II output. Edge-controlled digital memory network with three-state output; drives low-pass filter to control VCO input.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -0.975
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "14",
   "name": "SIGNAL_IN",
   "type": "input",
   "description": "Signal input to both phase comparators. Direct-coupled provides full CMOS logic swing (logic 0 < 30% VDD-VSS, logic 1 > 70% VDD-VSS); can be self-biased AC-coupled for smaller signals.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -1.625
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "15",
   "name": "ZENER",
   "type": "passive",
   "description": "Zener diode cathode for supply regulation. 5.2 V (typ) zener (Vz = 4.45 to 6.15 V at Iz = 50 uA); dynamic resistance ~40 ohm at Iz = 1 mA. Leave open when unused.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "16",
   "kind": "smd",
   "shape": "roundrect",
   "at": [
    2.8625,
    -2.275
   ],
   "rot": 0.0,
   "size": [
    1.475,
    0.4
   ],
   "layers": [
    "F.Cu",
    "F.Mask",
    "F.Paste"
   ],
   "thermal": false,
   "pin": "16",
   "name": "VDD",
   "type": "power_in",
   "description": "Positive supply. Operating range 3-18 V (VCO fixed oscillator), 5-18 V (phase-locked-loop operation). Absolute maximum -0.5 V to +20 V referenced to VSS.",
   "is_pin1": false,
   "source": {
    "geometry": "TSSOP-16_4.4x5mm_P0.65mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}